def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.speed.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Speed', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Speed')
self.activateSpeed = settings.BooleanSetting().getFromValue('Activate Speed:', self, True )
self.addFlowRate = settings.BooleanSetting().getFromValue('Add Flow Rate:', self, True )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Bridge -', self )
self.bridgeFeedRateMultiplier = settings.FloatSpin().getFromValue( 0.8, 'Bridge Feed Rate Multiplier (ratio):', self, 1.2, 1.0 )
self.bridgeFlowRateMultiplier = settings.FloatSpin().getFromValue( 0.8, 'Bridge Flow Rate Multiplier (ratio):', self, 1.2, 1.0 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Duty Cyle -', self )
self.dutyCycleAtBeginning = settings.FloatSpin().getFromValue( 0.0, 'Duty Cyle at Beginning (portion):', self, 1.0, 1.0 )
self.dutyCycleAtEnding = settings.FloatSpin().getFromValue( 0.0, 'Duty Cyle at Ending (portion):', self, 1.0, 0.0 )
settings.LabelSeparator().getFromRepository(self)
self.feedRatePerSecond = settings.FloatSpin().getFromValue( 2.0, 'Feed Rate (mm/s):', self, 50.0, 16.0 )
self.flowRateSetting = settings.FloatSpin().getFromValue( 50.0, 'Flow Rate Setting (float):', self, 250.0, 210.0 )
self.orbitalFeedRateOverOperatingFeedRate = settings.FloatSpin().getFromValue( 0.1, 'Orbital Feed Rate over Operating Feed Rate (ratio):', self, 0.9, 0.5 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Perimeter -', self )
self.perimeterFeedRateOverOperatingFeedRate = settings.FloatSpin().getFromValue( 0.5, 'Perimeter Feed Rate over Operating Feed Rate (ratio):', self, 1.0, 1.0 )
self.perimeterFlowRateOverOperatingFlowRate = settings.FloatSpin().getFromValue( 0.5, 'Perimeter Flow Rate over Operating Flow Rate (ratio):', self, 1.0, 1.0 )
settings.LabelSeparator().getFromRepository(self)
self.travelFeedRatePerSecond = settings.FloatSpin().getFromValue( 2.0, 'Travel Feed Rate (mm/s):', self, 50.0, 16.0 )
self.executeTitle = 'Speed'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.analyze_plugins.statistic.html',
self)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Statistic'
)
self.activateStatistic = settings.BooleanSetting().getFromValue(
'Activate Statistic', self, True)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Cost -', self)
self.machineTime = settings.FloatSpin().getFromValue(
0.0, 'Machine Time ($/hour):', self, 2.0, 1.0)
self.material = settings.FloatSpin().getFromValue(
0.0, 'Material ($/kg):', self, 20.0, 10.0)
settings.LabelSeparator().getFromRepository(self)
self.density = settings.FloatSpin().getFromValue(
500.0, 'Density (kg/m3):', self, 2000.0, 930.0)
self.extrusionDiameterOverThickness = settings.FloatSpin(
).getFromValue(1.0, 'Extrusion Diameter over Thickness (ratio):', self,
1.5, 1.25)
self.fileNameInput = settings.FileNameInput().getFromFileName(
[('Gcode text files', '*.gcode')],
'Open File to Generate Statistics for', self, '')
self.printStatistics = settings.BooleanSetting().getFromValue(
'Print Statistics', self, True)
self.saveStatistics = settings.BooleanSetting().getFromValue(
'Save Statistics', self, False)
self.executeTitle = 'Generate Statistics'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.analyze_plugins.vectorwrite.html',
self)
self.activateVectorwrite = settings.BooleanSetting().getFromValue(
'Activate Vectorwrite', self, False)
self.fileNameInput = settings.FileNameInput().getFromFileName(
[('Gcode text files', '*.gcode')],
'Open File to Write Vector Graphics for', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Vectorwrite'
)
self.addBoundaries = settings.BooleanSetting().getFromValue(
'Add Boundaries', self, True)
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue(
'Add Layer Template to SVG', self, True)
self.addLoops = settings.BooleanSetting().getFromValue(
'Add Loops', self, True)
self.addPaths = settings.BooleanSetting().getFromValue(
'Add Paths', self, True)
self.addPerimeters = settings.BooleanSetting().getFromValue(
'Add Perimeters', self, True)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self)
self.layersFrom = settings.IntSpin().getFromValue(
0, 'Layers From (index):', self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, 'Layers To (index):', self, 912345678, 912345678)
settings.LabelSeparator().getFromRepository(self)
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Vectorwrite'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.skin.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Skin', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Skin')
self.activateSkin = settings.BooleanSetting().getFromValue(
'Activate Skin', self, False)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Division -', self)
self.horizontalInfillDivisions = settings.IntSpin(
).getSingleIncrementFromValue(
1, 'Horizontal Infill Divisions (integer):', self, 3, 2)
self.horizontalPerimeterDivisions = settings.IntSpin(
).getSingleIncrementFromValue(
1, 'Horizontal Perimeter Divisions (integer):', self, 3, 1)
self.verticalDivisions = settings.IntSpin(
).getSingleIncrementFromValue(1, 'Vertical Divisions (integer):', self,
3, 2)
settings.LabelSeparator().getFromRepository(self)
self.hopWhenExtrudingInfill = settings.BooleanSetting().getFromValue(
'Hop When Extruding Infill', self, False)
self.layersFrom = settings.IntSpin().getSingleIncrementFromValue(
0, 'Layers From (index):', self, 912345678, 1)
self.executeTitle = 'Skin'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.multiply.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Multiply', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Multiply')
self.activateMultiply = settings.BooleanSetting().getFromValue(
'Activate Multiply: ', self, True)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName(
'- Center - (Set half your total x and y travel distance \nfor centering your prints!',
self)
self.centerX = settings.FloatSpin().getFromValue(
-240.0, 'Center X (mm):', self, 240.0, 100.0)
self.centerY = settings.FloatSpin().getFromValue(
-240.0, 'Center Y (mm):', self, 240.0, 100.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Number of Cells -', self)
self.numberOfColumns = settings.IntSpin().getFromValue(
1, 'Number of Columns (integer):', self, 10, 1)
self.numberOfRows = settings.IntSpin().getFromValue(
1, 'Number of Rows (integer):', self, 10, 1)
settings.LabelSeparator().getFromRepository(self)
self.reverseSequenceEveryOddLayer = settings.BooleanSetting(
).getFromValue('Reverse Sequence every Odd Layer', self, False)
self.separationOverPerimeterWidth = settings.FloatSpin().getFromValue(
5.0, 'Separation over Perimeter Width (ratio):', self, 25.0, 15.0)
self.executeTitle = 'Multiply'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.inset.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Inset', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Inset')
self.addCustomCodeForTemperatureReading = settings.BooleanSetting(
).getFromValue('Add Custom Code for Temperature Reading', self, True)
self.bridgeWidthMultiplier = settings.FloatSpin().getFromValue(
0.8, 'Bridge Width Multiplier (ratio):', self, 1.2, 1.0)
self.loopOrderChoice = settings.MenuButtonDisplay().getFromName(
'Loop Order Choice:', self)
self.loopOrderAscendingArea = settings.MenuRadio(
).getFromMenuButtonDisplay(self.loopOrderChoice, 'Ascending Area',
self, True)
self.loopOrderDescendingArea = settings.MenuRadio(
).getFromMenuButtonDisplay(self.loopOrderChoice, 'Descending Area',
self, False)
self.overlapRemovalWidthOverPerimeterWidth = settings.FloatSpin(
).getFromValue(0.3,
'Overlap Removal Width over Perimeter Width (ratio):',
self, 0.9, 0.6)
self.turnExtruderHeaterOffAtShutDown = settings.BooleanSetting(
).getFromValue('Turn Extruder Heater Off at Shut Down', self, True)
self.executeTitle = 'Inset'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_plugins.craft_plugins.preface.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Preface', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Preface'
)
self.meta = settings.StringSetting().getFromValue('Meta:', self, '')
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Name of Alteration Files -',
self)
self.nameOfEndFile = settings.StringSetting().getFromValue(
'Name of End File:', self, 'end.gcode')
self.nameOfStartFile = settings.StringSetting().getFromValue(
'Name of Start File:', self, 'start.gcode')
settings.LabelSeparator().getFromRepository(self)
self.setPositioningToAbsolute = settings.BooleanSetting().getFromValue(
'Set Positioning to Absolute', self, True)
self.setUnitsToMillimeters = settings.BooleanSetting().getFromValue(
'Set Units to Millimeters', self, True)
self.startAtHome = settings.BooleanSetting().getFromValue(
'Start at Home', self, False)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Turn Extruder Off -', self)
self.turnExtruderOffAtShutDown = settings.BooleanSetting(
).getFromValue('Turn Extruder Off at Shut Down', self, True)
self.turnExtruderOffAtStartUp = settings.BooleanSetting().getFromValue(
'Turn Extruder Off at Start Up', self, True)
self.executeTitle = 'Preface'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.cool.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Cool', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Cool')
self.activateCool = settings.BooleanSetting().getFromValue('Activate Cool', self, True)
self.bridgeCool = settings.FloatSpin().getFromValue(0.0, 'Bridge Cool (Celcius):', self, 10.0, 1.0)
self.coolType = settings.MenuButtonDisplay().getFromName('Cool Type:', self)
self.orbit = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Orbit', self, False)
self.slowDown = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Slow Down', self, True)
self.maximumCool = settings.FloatSpin().getFromValue(0.0, 'Maximum Cool (Celcius):', self, 10.0, 2.0)
self.minimumLayerTime = settings.FloatSpin().getFromValue(0.0, 'Minimum Layer Time (seconds):', self, 120.0, 60.0)
self.minimumOrbitalRadius = settings.FloatSpin().getFromValue(
0.0, 'Minimum Orbital Radius (millimeters):', self, 20.0, 10.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Name of Alteration Files -', self )
self.nameOfCoolEndFile = settings.StringSetting().getFromValue('Name of Cool End File:', self, 'cool_end.gcode')
self.nameOfCoolStartFile = settings.StringSetting().getFromValue('Name of Cool Start File:', self, 'cool_start.gcode')
settings.LabelSeparator().getFromRepository(self)
self.orbitalOutset = settings.FloatSpin().getFromValue(1.0, 'Orbital Outset (millimeters):', self, 5.0, 2.0)
self.turnFanOnAtBeginning = settings.BooleanSetting().getFromValue('Turn Fan On at Beginning', self, True)
self.turnFanOffAtEnding = settings.BooleanSetting().getFromValue('Turn Fan Off at Ending', self, True)
self.executeTitle = 'Cool'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.comb.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Comb', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Comb')
self.activateComb = settings.BooleanSetting().getFromValue('Activate Comb', self, False )
self.executeTitle = 'Comb'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.carve.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getTranslatorFileTypeTuples(),
'Open File for Carve', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Carve')
self.addLayerTemplateToSVG = settings.BooleanSetting().getFromValue(
'Add Layer Template to SVG', self, True)
self.edgeWidth = settings.FloatSpin().getFromValue(
0.1, 'Edge Width (mm):', self, 2.2, 0.4)
self.extraDecimalPlaces = settings.FloatSpin().getFromValue(
0.0, 'Extra Decimal Places (float):', self, 3.0, 2.0)
self.importCoarseness = settings.FloatSpin().getFromValue(
0.5, 'Import Coarseness (ratio):', self, 2.0, 1.0)
self.layerHeight = settings.FloatSpin().getFromValue(
0.1, 'Layer Height (mm):', self, 1.0, 0.2)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self)
self.layersFrom = settings.IntSpin().getFromValue(
0, 'Layers From (index):', self, 20, 0)
self.layersTo = settings.IntSpin().getSingleIncrementFromValue(
0, 'Layers To (index):', self, 912345678, 912345678)
settings.LabelSeparator().getFromRepository(self)
self.meshTypeLabel = settings.LabelDisplay().getFromName(
'Mesh Type: ', self)
importLatentStringVar = settings.LatentStringVar()
self.correctMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Correct Mesh', self, True)
self.unprovenMesh = settings.Radio().getFromRadio(
importLatentStringVar, 'Unproven Mesh', self, False)
self.svgViewer = settings.StringSetting().getFromValue(
'SVG Viewer:', self, 'webbrowser')
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Carve'
self.flipX = settings.BooleanSetting().getFromValue(
'FlipX', self, False)
self.flipY = settings.BooleanSetting().getFromValue(
'FlipY', self, False)
self.flipZ = settings.BooleanSetting().getFromValue(
'FlipZ', self, False)
self.swapXZ = settings.BooleanSetting().getFromValue(
'SwapXZ', self, False)
self.swapYZ = settings.BooleanSetting().getFromValue(
'SwapYZ', self, False)
self.centerX = settings.FloatSpin().getFromValue(
0.0, 'CenterX', self, 1000.0, 0.0)
self.centerY = settings.FloatSpin().getFromValue(
0.0, 'CenterY', self, 1000.0, 0.0)
self.scale = settings.FloatSpin().getFromValue(0.1, 'Scale', self,
10.0, 1.0)
self.rotate = settings.FloatSpin().getFromValue(
-180.0, 'Rotate', self, 180.0, 0.0)
self.alternativeCenter = settings.StringSetting().getFromValue(
'AlternativeCenterFile', self, '')
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.limit.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Limit', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Limit')
self.activateLimit = settings.BooleanSetting().getFromValue('Activate Limit', self, False)
self.maximumInitialFeedRate = settings.FloatSpin().getFromValue(0.5, 'Maximum Initial Feed Rate (mm/s):', self, 10.0, 1.0)
self.executeTitle = 'Limit'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.home.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Home', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromDocumentationSubName('skeinforge_application.skeinforge_plugins.craft_plugins.home.html')
self.activateHome = settings.BooleanSetting().getFromValue('Activate Home', self, True )
self.nameOfHomeFile = settings.StringSetting().getFromValue('Name of Home File:', self, 'home.gcode')
self.executeTitle = 'Home'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.jitter.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Jitter', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Jitter')
self.activateJitter = settings.BooleanSetting().getFromValue('Activate Jitter', self, True)
self.jitterOverPerimeterWidth = settings.FloatSpin().getFromValue(1.0, 'Jitter Over Perimeter Width (ratio):', self, 3.0, 2.0)
self.executeTitle = 'Jitter'
def __init__(self):
"Set the default settings, execute title & settings fileName."
settings.addListsToRepository('skeinforge_application.skeinforge_plugins.craft_plugins.home.html', None, self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Home', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_home')
self.activateHome = settings.BooleanSetting().getFromValue('Activate Home', self, True )
self.nameOfHomingFile = settings.StringSetting().getFromValue('Name of Homing File:', self, 'homing.gcode')
self.executeTitle = 'Home'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.dcflow.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Dcflow', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Dcflow')
self.activateDcflow = settings.BooleanSetting().getFromValue(
'Activate Dcflow', self, False)
self.activateDCExtruderFlowScale = settings.BooleanSetting(
).getFromValue('Activate DC Extruder Flow scaling (DC Extruders)',
self, True)
settings.LabelSeparator().getFromRepository(self)
self.filamentDiameter = settings.FloatSpin().getFromValue(
1.5, 'Filament Diameter (mm):', self, 3.5, 2.8)
self.filamentPackingDensity = settings.FloatSpin().getFromValue(
0.7, 'Extruder Flow Correction (ratio) lower=more extrusion:',
self, 1.0, 1.00)
self.activateCalibration = settings.BooleanSetting().getFromValue(
'Are You Calibrating?', self, False)
self.MeasuredXSection = settings.FloatSpin().getFromValue(
0.20, 'Measured Width of Extrusion:', self, 2.0, 0.5)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Fighting Oooze -', self)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Filament Retraction Settings -',
self)
self.retractionDistance = settings.FloatSpin().getFromValue(
0.00, 'Retraction Distance (millimeters):', self, 3.00, 1.00)
self.restartExtraDistance = settings.FloatSpin().getFromValue(
-0.50, 'Restart Extra Distance (millimeters):', self, 0.50, 0.00)
self.extruderRetractionSpeed = settings.FloatSpin().getFromValue(
5.0, 'Extruder Retraction Speed (mm/s):', self, 50.0, 15.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- When to retract ? -', self)
self.retractWhenCrossing = settings.BooleanSetting().getFromValue(
'Force to retract when crossing over spaces', self, True)
self.minimumExtrusionForRetraction = settings.FloatSpin().getFromValue(
0.0, 'Minimum Extrusion before Retraction (millimeters):', self,
2.0, 1.0)
self.minimumTravelForRetraction = settings.FloatSpin().getFromValue(
0.0, 'Minimum Travelmove after Retraction (millimeters):', self,
2.0, 1.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Firmware Related Stuff -', self)
extrusionDistanceFormatLatentStringVar = settings.LatentStringVar()
self.extrusionDistanceFormatChoiceLabel = settings.LabelDisplay(
).getFromName('Extrusion Values should be: ', self)
settings.Radio().getFromRadio(extrusionDistanceFormatLatentStringVar,
'in Absolute units', self, True)
self.relativeExtrusionDistance = settings.Radio().getFromRadio(
extrusionDistanceFormatLatentStringVar, 'in Relative units', self,
False)
settings.LabelSeparator().getFromRepository(self)
self.executeTitle = 'Dcflow'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.speed.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Speed', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Speed')
self.activateSpeed = settings.BooleanSetting().getFromValue(
'Activate Speed:', self, True)
self.addFlowRate = settings.BooleanSetting().getFromValue(
'Add Flow Rate:', self, True)
self.addAccelerationRate = settings.BooleanSetting().getFromValue(
'Add Acceleration Rate:', self, False)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Main Feedrate Settings -', self)
self.feedRatePerSecond = settings.FloatSpin().getFromValue(
20, 'Main Feed Rate (mm/s):', self, 140, 60)
self.flowRateSetting = settings.FloatSpin().getFromValue(
0.5, 'Main Flow Rate (scaler):', self, 1.5, 1.0)
self.AccelerationRateSetting = settings.FloatSpin().getFromValue(
500, 'Main Acceleration Rate for Extruder (mm/s2):', self, 10000,
1300)
self.orbitalFeedRateOverOperatingFeedRate = settings.FloatSpin(
).getFromValue(0.1, 'Feed Rate ratio for Orbiting move (ratio):', self,
0.9, 0.5)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Perimeter Printing -', self)
self.perimeterFeedRateOverOperatingFeedRate = settings.FloatSpin(
).getFromValue(20, 'Perimeter Feed Rate (mm/s):', self, 80, 30)
self.perimeterFlowRateOverOperatingFlowRate = settings.FloatSpin(
).getFromValue(0.5, 'Perimeter Flow Rate (scaler):', self, 1.5, 1.0)
self.perimeterAccelerationRate = settings.FloatSpin().getFromValue(
5, 'Perimeter Acceleration Rate for Extruder (mm/s2):', self,
10000, 50)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Bridge Layers -', self)
self.bridgeFeedRateMultiplier = settings.FloatSpin().getFromValue(
0.5, 'Bridge Feed Rate (ratio to Perim.feed):', self, 1.5, 1.0)
self.bridgeFlowRateMultiplier = settings.FloatSpin().getFromValue(
0.5, 'Bridge Flow Rate (scaler):', self, 1.3, 1.0)
self.bridgeAccelerationRate = settings.FloatSpin().getFromValue(
10, 'Bridge Acceleration Rate for Extruder(mm/s2):', self, 10000,
1000)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Perimeter -', self)
settings.LabelSeparator().getFromRepository(self)
self.travelFeedRatePerSecond = settings.FloatSpin().getFromValue(
40, 'Travel Feed Rate (mm/s):', self, 300, 130)
settings.LabelDisplay().getFromName(
'- Duty Cyle for DC extruders only -', self)
self.dutyCycleAtBeginning = settings.FloatSpin().getFromValue(
0.0, 'Duty Cyle at Beginning (portion):', self, 1.0, 1.0)
self.dutyCycleAtEnding = settings.FloatSpin().getFromValue(
0.0, 'Duty Cyle at Ending (portion):', self, 1.0, 0.0)
self.executeTitle = 'Speed'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.smooth.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Smooth', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Smooth')
self.activateSmooth = settings.BooleanSetting().getFromValue('Activate Smooth', self, False)
self.layersFrom = settings.IntSpin().getSingleIncrementFromValue(0, 'Layers From (index):', self, 912345678, 1)
self.maximumShorteningOverWidth = settings.FloatSpin().getFromValue(0.2, 'Maximum Shortening over Width (float):', self, 2.0, 1.2)
self.executeTitle = 'Smooth'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.hop.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Hop', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Hop')
self.activateHop = settings.BooleanSetting().getFromValue('Activate Hop', self, False )
self.hopOverLayerThickness = settings.FloatSpin().getFromValue( 0.5, 'Hop Over Layer Thickness (ratio):', self, 1.5, 1.0 )
self.minimumHopAngle = settings.FloatSpin().getFromValue( 20.0, 'Minimum Hop Angle (degrees):', self, 60.0, 30.0 )
self.executeTitle = 'Hop'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.synopsis.html', self )
self.activateSynopsis = settings.BooleanSetting().getFromValue('Activate Synopsis', self, False )
self.fileNameInput = settings.FileNameInput().getFromFileName( [ ('Gcode text files', '*.gcode') ], 'Open File to Write Synopsis for', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Synopsis')
self.exportProfileAsCSVFile = settings.BooleanSetting().getFromValue('Export Profile As CSV File', self, True)
self.exportProfileAsZipFile = settings.BooleanSetting().getFromValue('Export Profile As Zip File', self, False)
self.executeTitle = 'Synopsis'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.clip.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Clip', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Clip')
self.activateClip = settings.BooleanSetting().getFromValue('Activate Clip', self, False)
self.clipOverEdgeWidth = settings.FloatSpin().getFromValue(0.1, 'Clip Over Perimeter Width (ratio):', self, 0.8, 0.5)
self.maximumConnectionDistanceOverEdgeWidth = settings.FloatSpin().getFromValue( 1.0, 'Maximum Connection Distance Over Perimeter Width (ratio):', self, 20.0, 10.0)
self.executeTitle = 'Clip'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.lash.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Lash', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Lash')
self.activateLash = settings.BooleanSetting().getFromValue('Activate Lash if you have backlash in your axes', self, False )
self.xBacklash = settings.FloatSpin().getFromValue( 0.1, 'X Backlash (mm):', self, 0.5, 0.2 )
self.yBacklash = settings.FloatSpin().getFromValue( 0.1, 'Y Backlash (mm):', self, 0.5, 0.3 )
self.executeTitle = 'Lash'
def __init__(self):
"Set the default settings, execute title & settings fileName."
settings.addListsToRepository('skeinforge_application.skeinforge_plugins.craft_plugins.unpause.html', None, self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Unpause', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Unpause')
self.activateUnpause = settings.BooleanSetting().getFromValue('Activate Unpause', self, False )
self.delay = settings.FloatSpin().getFromValue( 2.0, 'Delay (milliseconds):', self, 42.0, 28.0 )
self.maximumSpeed = settings.FloatSpin().getFromValue( 1.1, 'Maximum Speed (ratio):', self, 1.9, 1.3 )
self.executeTitle = 'Unpause'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.interpret.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Interpret', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Interpret')
self.activateInterpret = settings.BooleanSetting().getFromValue('Activate Interpret', self, False )
self.printInterpretion = settings.BooleanSetting().getFromValue('Print Interpretion', self, False )
self.textProgram = settings.StringSetting().getFromValue('Text Program:', self, 'webbrowser')
self.executeTitle = 'Interpret'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.clairvoyance.html', self)
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromDocumentationSubName('skeinforge_application.skeinforge_plugins.analyze_plugins.clairvoyance.html')
self.activateClairvoyance = settings.BooleanSetting().getFromValue('Activate Clairvoyance', self, False)
settings.LabelSeparator().getFromRepository(self)
self.fileNameInput = settings.FileNameInput().getFromFileName([('Gcode text files', '*.gcode')], 'Open File to Generate Clairvoyances for', self, '')
self.gcodeProgram = settings.StringSetting().getFromValue('Gcode Program:', self, 'webbrowser')
self.executeTitle = 'Clairvoyance'
def __init__( self ): "Set the default settings, execute title & settings fileName." settings.addListsToRepository( 'skeinforge.skeinforge_tools.analyze_plugins.statistic.html', '', self ) self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute( 'http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Statistic' ) self.activateStatistic = settings.BooleanSetting().getFromValue( 'Activate Statistic', self, True ) self.extrusionDiameterOverThickness = settings.FloatSpin().getFromValue( 1.0, 'Extrusion Diameter over Thickness (ratio):', self, 1.5, 1.25 ) self.fileNameInput = settings.FileNameInput().getFromFileName( [ ( 'Gcode text files', '*.gcode' ) ], 'Open File to Generate Statistics for', self, '' ) self.printStatistics = settings.BooleanSetting().getFromValue( 'Print Statistics', self, True ) self.saveStatistics = settings.BooleanSetting().getFromValue( 'Save Statistics', self, False ) self.executeTitle = 'Generate Statistics'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.clip.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Clip', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Clip')
self.activateClip = settings.BooleanSetting().getFromValue('Activate Clip..to clip the extrusion that overlaps when printing edges', self, True )
settings.LabelSeparator().getFromRepository(self)
self.clipOverEdgeWidth = settings.FloatSpin().getFromValue( 0.1, 'Clip Over Perimeter Width adjuster (increase for bigger gap):', self, 1.0, 0.33 )
self.maximumConnectionDistanceOverEdgeWidth = settings.FloatSpin().getFromValue( 1.0, 'Threshold for connecting inner loops (ratio):', self, 50.0, 25.0 )
self.executeTitle = 'Clip'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.scale.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName(fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Scale', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Scale')
self.activateScale = settings.BooleanSetting().getFromValue('Activate Scale', self, False)
self.xyPlaneScale = settings.FloatSpin().getFromValue(0.99, 'XY Plane Scale (ratio):', self, 1.03, 1.01)
self.zAxisScale = settings.FloatSpin().getFromValue(0.99, 'Z Axis Scale (ratio):', self, 1.02, 1.0)
self.svgViewer = settings.StringSetting().getFromValue('SVG Viewer:', self, 'webbrowser')
self.executeTitle = 'Scale'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.tower.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Tower', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Tower')
self.activateTower = settings.BooleanSetting().getFromValue('Activate Tower', self, False )
self.extruderPossibleCollisionConeAngle = settings.FloatSpin().getFromValue( 40.0, 'Extruder Possible Collision Cone Angle (degrees):', self, 80.0, 60.0 )
self.maximumTowerHeight = settings.IntSpin().getFromValue( 2, 'Maximum Tower Height (layers):', self, 10, 5 )
self.towerStartLayer = settings.IntSpin().getFromValue( 1, 'Tower Start Layer (integer):', self, 5, 1 )
self.executeTitle = 'Tower'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.chamber.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Chamber', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Chamber')
self.activateChamber = settings.BooleanSetting().getFromValue('Activate Chamber:', self, True )
self.bedTemperature = settings.FloatSpin().getFromValue( 20.0, 'Bed Temperature (Celcius):', self, 90.0, 60.0 )
self.chamberTemperature = settings.FloatSpin().getFromValue( 20.0, 'Chamber Temperature (Celcius):', self, 90.0, 30.0 )
self.holdingForce = settings.FloatSpin().getFromValue( 0.0, 'Holding Force (bar):', self, 100.0, 0.0 )
self.executeTitle = 'Chamber'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Skeinforge', self, '')
self.profileType = settings.MenuButtonDisplay().getFromName('Profile Type: ', self )
self.profileSelection = settings.MenuButtonDisplay().getFromName('Profile Selection: ', self)
addToProfileMenu( self.profileSelection, self.profileType, self )
settings.LabelDisplay().getFromName('Search:', self )
reprapSearch = settings.HelpPage().getFromNameAfterHTTP('members.axion.net/~enrique/search_reprap.html', 'Reprap', self)
skeinforgeSearch = settings.HelpPage().getFromNameAfterHTTP('members.axion.net/~enrique/search_skeinforge.html', 'Skeinforge', self )
skeinforgeSearch.column += 2
webSearch = settings.HelpPage().getFromNameAfterHTTP('members.axion.net/~enrique/search_web.html', 'Web', self)
webSearch.column += 4
versionText = archive.getFileText( archive.getVersionFileName() )
self.version = settings.LabelDisplay().getFromName('Version: ' + versionText, self)
settings.LabelDisplay().getFromName('', self)
importantFileNames = ['craft', 'profile']
getRadioPluginsAddPluginGroupFrame(getPluginsDirectoryPath(), importantFileNames, getPluginFileNames(), self)
self.executeTitle = 'Skeinforge'
