def testSendingClientAction():
c = \
"""
[general]
fdtSendingClientCommand = bash wrapper_fdt.sh -P 35 -p %(port)s -c %(hostDest)s -d / -fl %(fileList)s -noupdates
fdtReceivingServerCommand = bash wrapper_fdt.sh -bs 2M -p %(port)s -noupdates
"""
f = getTempFile(c)
inputOption = "--config=%s" % f.name
conf = ConfigFDTD(inputOption.split())
options = dict(port="some_port", hostDest="host_dest", transferFiles=[])
a = SendingClientAction("some_id", options)
a._setUp(conf)
assert a.options["fileList"] == "/tmp/fileLists/fdt-fileList-some_id"
# this one did not get interpolated for client action, so it's not set
py.test.raises(KeyError, a.options.__getitem__,
"fdtReceivingServerCommand")
assert a.command == "bash wrapper_fdt.sh -P 35 -p some_port -c host_dest -d / -fl /tmp/fileLists/fdt-fileList-some_id -noupdates"
# clean up after test, only if succeeded
os.unlink(a.options["fileList"])
def testSendingClientAction():
c = \
"""
[general]
fdtSendingClientCommand = bash wrapper_fdt.sh -P 35 -p %(port)s -c %(hostDest)s -d / -fl %(fileList)s -noupdates
fdtReceivingServerCommand = bash wrapper_fdt.sh -bs 2M -p %(port)s -noupdates
"""
f = getTempFile(c)
inputOption = "--config=%s" % f.name
conf = ConfigFDTD(inputOption.split())
options = dict(port = "some_port", hostDest = "host_dest", transferFiles = [])
a = SendingClientAction("some_id", options)
a._setUp(conf)
assert a.options["fileList"] == "/tmp/fdt-fileList-some_id"
# this one did not get interpolated for client action, so it's not set
py.test.raises(KeyError, a.options.__getitem__, "fdtReceivingServerCommand")
assert a.command == "bash wrapper_fdt.sh -P 35 -p some_port -c host_dest -d / -fl /tmp/fdt-fileList-some_id -noupdates"
# clean up after test, only if succeeded
os.unlink(a.options["fileList"])
def testInputCopyJobFileTranslationIntoFDTFileList():
# correct data - input copyjobfile - all must be the same source host,
# destination host pairs, otherwise such input copyjobfile will break
# into a number of FDT fileList files on corresponding source hosts
inputData = \
"""fdt://localhost:111/tmp/file fdt://localhost:222/tmp/fileX1
fdt://localhost:111/tmp/fileGY fdt://localhost:222/tmp/fileX2
fdt://localhost:111/tmp/fileWA fdt://localhost:222/tmp/fileX
fdt://localhost:111/tmp/fileWQ fdt://localhost:222/tmp/fileTY
fdt://localhost:111/tmp/file9Y fdt://localhost:222/tmp/fileIO"""
# desired output fileList for FDT client
outputData = \
"""/tmp/file / /tmp/fileX1
/tmp/fileGY / /tmp/fileX2
/tmp/fileWA / /tmp/fileX
/tmp/fileWQ / /tmp/fileTY
/tmp/file9Y / /tmp/fileIO"""
logger = logger = Logger("test logger", level = logging.DEBUG)
copyJobFile = tempfile.NamedTemporaryFile("w+") # read / write
copyJobFile.write(inputData)
copyJobFile.flush()
copyJobFile.seek(0)
inputOption = "--copyjobfile=%s" % copyJobFile.name
conf = ConfigFDTCopy(inputOption.split())
apMon = None
transfers = Transfers(conf, apMon, logger)
# since having the same source host, destination host pair, should have
# only one transfer job
t = transfers.transfers["localhost:111-localhost:222"]
assert len(transfers.transfers) == 1
assert len(t.files) == 5
# do relevant stuff from fdtcp performTransfer method now
testAction = TestAction(timeout = 5)
t.id = testAction.id
options = dict(port = "some_port", hostDest = t.hostDest, transferFiles = t.files)
sndClientAction = SendingClientAction(testAction.id, options)
assert sndClientAction.options["port"] == "some_port"
assert sndClientAction.options["hostDest"] == t.hostDest
# fileList is constructed at the side of fdtd service (remote site)
# simulate this process ...
class MockFDTDConfig(Mock):
# mock class only to satisfy sndClientAction._setUp() call
def get(self, what):
return "some string"
sndClientAction._setUp(MockFDTDConfig()) # this method is called on fdtd service site
assert sndClientAction.options["fileList"] == "/tmp/fdt-fileList-%s" % sndClientAction.id
# now check content of the fileList file - shall be as the output data
data = open(sndClientAction.options["fileList"], 'r').readlines()
for line1, line2 in zip(data, outputData.split('\n')):
assert line1.strip() == line2
# clean up after test, only if succeeded
os.unlink(sndClientAction.options["fileList"])
def testInputCopyJobFileTranslationIntoFDTFileList():
# correct data - input copyjobfile - all must be the same source host,
# destination host pairs, otherwise such input copyjobfile will break
# into a number of FDT fileList files on corresponding source hosts
inputData = \
"""fdt://localhost:111/tmp/file fdt://localhost:222/tmp/fileX1
fdt://localhost:111/tmp/fileGY fdt://localhost:222/tmp/fileX2
fdt://localhost:111/tmp/fileWA fdt://localhost:222/tmp/fileX
fdt://localhost:111/tmp/fileWQ fdt://localhost:222/tmp/fileTY
fdt://localhost:111/tmp/file9Y fdt://localhost:222/tmp/fileIO"""
# desired output fileList for FDT client
outputData = \
"""/tmp/file / /tmp/fileX1
/tmp/fileGY / /tmp/fileX2
/tmp/fileWA / /tmp/fileX
/tmp/fileWQ / /tmp/fileTY
/tmp/file9Y / /tmp/fileIO"""
logger = Logger("test logger", level=logging.DEBUG)
copyJobFile = tempfile.NamedTemporaryFile("w+") # read / write
copyJobFile.write(inputData)
copyJobFile.flush()
copyJobFile.seek(0)
inputOption = "--copyjobfile=%s" % copyJobFile.name
conf = ConfigFDTCopy(inputOption.split())
apMon = None
transfers = Transfers(conf, apMon, logger)
# since having the same source host, destination host pair, should have
# only one transfer job
t = transfers.transfers["localhost:111-localhost:222"]
assert len(transfers.transfers) == 1
assert len(t.files) == 5
# do relevant stuff from fdtcp performTransfer method now
testAction = TestAction(t.hostSrc, t.hostDest, timeout=5)
t.id = testAction.id
options = dict(port="some_port",
hostDest=t.hostDest,
transferFiles=t.files)
sndClientAction = SendingClientAction(testAction.id, options)
assert sndClientAction.options["port"] == "some_port"
assert sndClientAction.options["hostDest"] == t.hostDest
# fileList is constructed at the side of fdtd service (remote site)
# simulate this process ...
class MockFDTDConfig(Mock):
# mock class only to satisfy sndClientAction._setUp() call - when
# it checks for log file
def get(self, what):
return "/tmp/logfile"
# this method is called on fdtd service site
sndClientAction._setUp(MockFDTDConfig())
assert sndClientAction.options["fileList"] == \
"/tmp/fileLists/fdt-fileList-%s" % sndClientAction.id
# now check content of the fileList file - shall be as the output data
data = open(sndClientAction.options["fileList"], 'r').readlines()
for line1, line2 in zip(data, outputData.split('\n')):
assert line1.strip() == line2
# clean up after test, only if succeeded
os.unlink(sndClientAction.options["fileList"])