def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError(
"Trying to run fermipy analysis, but don't have ST")
gta = GTAnalysis(args.config, logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
gta.setup(overwrite=False)
baseline_roi_fit(gta, make_plots=args.make_plots,
minmax_npred=[1e3, np.inf])
localize_sources(gta, nstep=5, dtheta_max=0.5, update=True,
prefix='base', make_plots=args.make_plots)
gta.find_sources(sqrt_ts_threshold=5.0, search_skydir=gta.roi.skydir,
search_minmax_radius=[1.0, np.nan])
gta.optimize()
gta.print_roi()
gta.print_params()
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
gta.fit(covar=True)
gta.print_roi()
gta.print_params()
gta.write_roi(args.roi_baseline, make_plots=args.make_plots)
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError("Trying to run fermipy analysis, but don't have ST")
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
gta.setup(overwrite=False)
gta.load_roi('fit_baseline')
gta.print_roi()
basedir = os.path.dirname(args.config)
# This should be a no-op, b/c it was done in the baseline analysis
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
for profile in args.profiles:
pkey, pdict = SEDAnalysis._build_profile_dict(basedir, profile)
# test_case need to be a dict with spectrum and morphology
gta.add_source(pkey, pdict)
# refit the ROI
gta.fit()
# build the SED
gta.sed(pkey, outfile="sed_%s.fits" % pkey)
# remove the source
gta.delete_source(pkey)
# put the ROI back to how it was
gta.load_xml('fit_baseline')
return gta
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError("Trying to run fermipy analysis, but don't have ST")
gta = GTAnalysis(args.config, logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
gta.setup(overwrite=False)
gta.free_sources(False)
gta.print_roi()
gta.optimize()
gta.print_roi()
exclude = ['3FGL J1707.8+5626']
# Localize all point sources
for src in sorted(gta.roi.sources, key=lambda t: t['ts'], reverse=True):
# for s in gta.roi.sources:
if not src['SpatialModel'] == 'PointSource':
continue
if src['offset_roi_edge'] > -0.1:
continue
if src.name in exclude:
continue
if not '3FGL' in src.name:
continue
gta.localize(src.name, nstep=5, dtheta_max=0.5, update=True,
prefix='base', make_plots=True)
gta.optimize()
gta.print_roi()
gta.write_roi('base_roi', make_plots=True)
gta.find_sources(sqrt_ts_threshold=5.0)
gta.optimize()
gta.print_roi()
gta.print_params()
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
gta.fit()
gta.print_roi()
gta.print_params()
gta.write_roi('fit_baseline', make_plots=True)
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError(
"Trying to run fermipy analysis, but don't have ST")
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
gta.setup(overwrite=False)
baseline_roi_fit(gta,
make_plots=args.make_plots,
minmax_npred=[1e3, np.inf])
localize_sources(gta,
nstep=5,
dtheta_max=0.5,
update=True,
prefix='base',
make_plots=args.make_plots)
gta.find_sources(sqrt_ts_threshold=5.0,
search_skydir=gta.roi.skydir,
search_minmax_radius=[1.0, np.nan])
gta.optimize()
gta.print_roi()
gta.print_params()
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
gta.fit(covar=True)
gta.print_roi()
gta.print_params()
gta.write_roi(args.roi_baseline, make_plots=args.make_plots)
gta = GTAnalysis(args.config, logging={"verbosity": 3})
gta.setup()
gta.simulate_roi(restore=True)
ext_fit_data = []
halo_fit_data = []
gta.write_roi("base_model", save_model_map=False, make_plots=False)
for i in range(1):
gta.load_xml("base_model")
gta.simulate_roi(randomize=False)
gta.free_source("testsource")
gta.update_source("testsource")
# gta.fit()
gta.free_sources(free=False)
gta.extension("testsource", width=np.logspace(-2.5, -0.5, 9))
ext_fit_data += [copy.deepcopy(gta.roi["testsource"])]
gta.write_roi("fit%04i" % i, save_model_map=False, make_plots=False, format="npy")
fit_halo(gta, "fit%04i" % i, "testsource", halo_width, halo_index)
np.save(os.path.join(gta._savedir, "ext_fit_data.npy"), ext_fit_data)
description = "Run fermipy analysis chain."
parser = argparse.ArgumentParser(usage=usage,description=description)
parser.add_argument('--config', default = 'sample_config.yaml')
args = parser.parse_args()
gta = GTAnalysis(args.config)
gta.setup()
# Iteratively optimize all components in the ROI
gta.optimize()
# Fix sources w/ TS < 10
gta.free_sources(minmax_ts=[None,10],free=False)
# Free sources within 3 degrees of ROI center
gta.free_sources(distance=3.0)
# Free sources by name
gta.free_source('mkn421')
gta.free_source('galdiff')
gta.free_source('isodiff')
# Free only the normalization of a specific source
gta.free_norm('3FGL J1129.0+3705')
gta.fit()
# Compute the SED for a source
#####################
# START OF ANALYSIS #
#####################
#initializing analysis object
gta = GTAnalysis('config.yaml',logging={'verbosity': 3})
gta.setup(overwrite = True)
#first optimization run with output
fit_res = gta.optimize()
gta.write_roi('fit_optimize')
#free parameters for full likelihood fit
gta.free_sources(pars='norm')
gta.free_sources(distance = 3.0)
gta.free_source('galdiff')
gta.free_source('isodiff')
#do the likelihood fit
fit_results = gta.fit()
if fit_results['fit_success']!=True:
gta.load_roi('fit_optimize.npy')
gta.free_sources(free=False)
gta.free_sources(pars='norm', distance = 3.0)
gta.free_sources(distance = 1.)
gta.free_source('galdiff')
gta.free_source('isodiff')
fit_res2 = gta.fit()
def main():
usage = "usage: %(prog)s [config file]"
description = "Run fermipy analysis chain."
parser = argparse.ArgumentParser(usage=usage, description=description)
parser.add_argument('--config', default='sample_config.yaml')
parser.add_argument('--source', default=None)
args = parser.parse_args()
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
model0 = {'SpatialModel': 'PointSource', 'Index': 1.5}
model1 = {'SpatialModel': 'PointSource', 'Index': 2.0}
model2 = {'SpatialModel': 'PointSource', 'Index': 2.7}
src_name = gta.config['selection']['target']
gta.setup(overwrite=True)
gta.free_sources(False)
gta.print_roi()
gta.optimize()
gta.print_roi()
exclude = []
# Localize all point sources
for s in sorted(gta.roi.sources, key=lambda t: t['ts'], reverse=True):
# for s in gta.roi.sources:
if not s['SpatialModel'] == 'PointSource':
continue
if s['offset_roi_edge'] > -0.1:
continue
if s.name in exclude:
continue
if not '3FGL' in s.name:
continue
if s.name == src_name:
continue
gta.localize(s.name,
nstep=5,
dtheta_max=0.5,
update=True,
prefix='base',
make_plots=True)
gta.optimize()
gta.print_roi()
gta.write_roi('base_roi', make_plots=True)
exclude = [src_name]
if not 'carina_2' in exclude:
exclude += ['carina_2']
if not 'carina_3' in exclude:
exclude += ['carina_3']
gta.tsmap('base', model=model0, make_plots=True, exclude=exclude)
gta.residmap('base', model=model0, make_plots=True, exclude=exclude)
gta.tsmap('base', model=model1, make_plots=True, exclude=exclude)
gta.residmap('base', model=model1, make_plots=True, exclude=exclude)
gta.tsmap('base', model=model2, make_plots=True, exclude=exclude)
gta.residmap('base', model=model2, make_plots=True, exclude=exclude)
gta.find_sources(sqrt_ts_threshold=5.0)
gta.optimize()
gta.print_roi()
gta.print_params()
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
gta.fit()
gta.print_roi()
gta.print_params()
gta.write_roi('fit0_roi', make_plots=True)
m = gta.tsmap('fit0', model=model0, make_plots=True, exclude=exclude)
gta.plotter.make_tsmap_plots(m, gta.roi, zoom=2, suffix='tsmap_zoom')
gta.residmap('fit0', model=model0, make_plots=True, exclude=exclude)
gta.tsmap('fit0', model=model1, make_plots=True, exclude=exclude)
gta.plotter.make_tsmap_plots(m, gta.roi, zoom=2, suffix='tsmap_zoom')
gta.residmap('fit0', model=model1, make_plots=True, exclude=exclude)
gta.tsmap('fit0', model=model2, make_plots=True, exclude=exclude)
gta.plotter.make_tsmap_plots(m, gta.roi, zoom=2, suffix='tsmap_zoom')
gta.residmap('fit0', model=model2, make_plots=True, exclude=exclude)
gta.sed(src_name, prefix='fit0', make_plots=True, free_radius=1.0)
gta.free_source(src_name)
gta.fit(reoptimize=True)
gta.print_roi()
gta.print_params()
gta.write_roi('fit1_roi', make_plots=True)
description = "Run fermipy analysis chain."
parser = argparse.ArgumentParser(usage=usage, description=description)
parser.add_argument('--config', default='sample_config.yaml')
args = parser.parse_args()
gta = GTAnalysis(args.config)
gta.setup()
# Iteratively optimize all components in the ROI
gta.optimize()
# Fix sources w/ TS < 10
gta.free_sources(minmax_ts=[None, 10], free=False)
# Free sources within 3 degrees of ROI center
gta.free_sources(distance=3.0)
# Free sources by name
gta.free_source('mkn421')
gta.free_source('galdiff')
gta.free_source('isodiff')
# Free only the normalization of a specific source
gta.free_norm('3FGL J1129.0+3705')
gta.fit()
# Compute the SED for a source
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError(
"Trying to run fermipy analysis, but don't have ST")
if is_null(args.skydirs):
skydir_dict = None
else:
skydir_dict = load_yaml(args.skydirs)
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
#gta.setup(overwrite=False)
gta.load_roi(args.roi_baseline)
gta.print_roi()
basedir = os.path.dirname(args.config)
# This should be a no-op, b/c it was done in the baseline analysis
for profile in args.profiles:
if skydir_dict is None:
skydir_keys = [None]
else:
skydir_keys = sorted(skydir_dict.keys())
for skydir_key in skydir_keys:
if skydir_key is None:
pkey, psrc_name, pdict = build_profile_dict(basedir, profile)
else:
skydir_val = skydir_dict[skydir_key]
pkey, psrc_name, pdict = build_profile_dict(basedir, profile)
pdict['ra'] = skydir_val['ra']
pdict['dec'] = skydir_val['dec']
pkey += "_%06i" % skydir_key
outfile = "sed_%s.fits" % pkey
# Add the source and get the list of correlated soruces
correl_dict, test_src_name = add_source_get_correlated(gta, psrc_name,
pdict, correl_thresh=0.25,
non_null_src=args.non_null_src)
# Write the list of correlated sources
correl_yaml = os.path.join(basedir, "correl_%s.yaml" % pkey)
write_yaml(correl_dict, correl_yaml)
gta.free_sources(False)
for src_name in correl_dict.keys():
gta.free_source(src_name, pars='norm')
# build the SED
if args.non_null_src:
gta.update_source(test_src_name, reoptimize=True)
gta.write_roi("base_%s"% pkey, make_plots=False)
gta.sed(test_src_name, prefix=pkey, outfile=outfile, make_plots=args.make_plots)
# remove the source
gta.delete_source(test_src_name)
# put the ROI back to how it was
gta.load_xml(args.roi_baseline)
return gta
def main(cmd_line):
#takes integer arguement specifying the simulation number
sim = cmd_line[1]
indir = "/zfs/astrohe/ckarwin/Machine_Learning_GC/Sim_2/Dame_Maps/"
outdir = indir + "Simulation_Output/sim_%s" % sim
if (os.path.isdir(outdir) == True):
shutil.rmtree(outdir)
os.system('mkdir %s' % outdir)
os.chdir(outdir)
#A single simulation should first be ran, which will generate all the needed data products that can be reused for subsequent simulations.
#The data products that are copied below are for subsequent simulations after the first run.
shutil.copy2('%s/srcmap_00.fits' % indir, 'srcmap_00.fits')
shutil.copy2('%s/bexpmap_00.fits' % indir, 'bexpmap_00.fits')
shutil.copy2('%s/ccube_00.fits' % indir, 'ccube_00.fits')
shutil.copy2('%s/config.yaml' % indir, 'config.yaml')
shutil.copy2('%s/ft1_00.fits' % indir, 'ft1_00.fits')
shutil.copy2('%s/LAT_Final_Excess_Template.fits' % indir,
'LAT_Final_Excess_Template.fits')
#setup analysis:
gta = GTAnalysis('config.yaml', logging={'verbosity': 3})
gta.setup()
#gta.load_roi("after_setup")
#set components to zero for simulations:
gta.set_norm("MapSource", 0.0) #excess template
gta.set_norm("galdiff04", 0.0) #CO12_0-5
gta.set_norm("galdiff05", 0.0) #CO12_6-9
gta.set_norm("galdiff06", 0.0) #CO12_10-12
gta.set_norm("galdiff07", 0.0) #CO12_13-16
#run simulations:
gta.write_roi('before_sim')
gta.simulate_roi(randomize=True)
#delete sources that were simulated:
gta.delete_source("galdiff00", delete_source_map=False)
gta.delete_source("galdiff01", delete_source_map=False)
gta.delete_source("galdiff02", delete_source_map=False)
gta.delete_source("galdiff03", delete_source_map=False)
#set random normalizations of sources for performing fit:
#n4 = np.random.normal(1.0,0.2)
#n5 = np.random.normal(1.0,0.2)
#n6 = np.random.normal(1.0,0.2)
#nms = np.random.normal(1e-4,0.5e-4)
gta.set_norm("galdiff04", 0.8)
gta.set_norm("galdiff05", 0.8)
gta.set_norm("galdiff06", 1.2)
gta.set_norm("galdiff07", 1.2)
#perform fit for null hypothesis:
gta.free_sources(free=True)
gta.free_source("galdiff07", free=False)
gta.free_source("MapSource", free=False)
Fit = gta.fit()
null = Fit["loglike"]
gta.write_roi('after_null_fit')
gta.write_model_map("null_model")
#set normalizations of sources for performing alternative fit:
gta.set_norm("galdiff04", 0.8)
gta.set_norm("galdiff05", 0.8)
gta.set_norm("galdiff06", 1.2)
gta.set_norm("galdiff07", 1.2)
gta.set_norm("MapSource", 1e-4)
gta.free_sources(free=True)
#gta.free_source("galdiff07",free=False)
Fit2 = gta.fit()
alternative = Fit2["loglike"]
gta.write_roi('after_alternative_fit')
gta.write_model_map("alternative_model")
#calculate source spectrum:
ltcube = '/zfs/astrohe/ckarwin/Stacking_Analysis/UFOs/NGC_4151_Analysis/MakeLTCube/zmax_105/UFOs_binned_ltcube.fits'
obs = BinnedObs(srcMaps='srcmap_00.fits',
expCube=ltcube,
binnedExpMap='bexpmap_00.fits',
irfs='P8R3_SOURCE_V2')
like = BinnedAnalysis(obs,
'after_alternative_fit_00.xml',
optimizer='MINUIT')
Elist, Flist = CalcFlux(like, 'MapSource')
data = {"energ[MeV]": Elist, "flux[MeV/cm^2/s]": Flist}
df = pd.DataFrame(data=data)
df.to_csv("excess_flux.dat", sep="\t", index=False)
#calculte TS:
TS = -2 * (null - alternative)
#write results:
savefile = "TS_sim_%s.txt" % sim
f = open(savefile, "w")
f.write(str(TS))
f.close()
#rm ft file to reduce storage:
os.system('rm ft1_00.fits')
return
config['fileio']['outdir'] = cwd+'/fits'
config['fileio']['logfile'] = cwd+'/fits/fermipy.log'
config['data']['ltcube'] = cwd+'/fits/ltcube_00.fits'
config['model']['galdiff'] = path_to_conda+'/share/fermitools/refdata/fermi/galdiffuse/gll_iem_v07.fits'
config['model']['isodiff'] = path_to_conda+'/share/fermitools/refdata/fermi/galdiffuse/iso_P8R3_SOURCE_V3_v1.txt'
config['logging']['verbosity'] = 4
source = config['selection']['target']
with open(cwd+'/config_modified.yaml', 'w') as o:
yaml.dump(config, o)
likelihoods = np.zeros((5))
gta = GTAnalysis(config='config_modified.yaml')
gta.setup()
model = {'Index' : 2.0, 'SpatialModel' : 'PointSource'}
for i in range(1,6):
gta.optimize()
gta.free_sources(free=False)
gta.free_source(source)
gta.free_source('galdiff')
gta.free_source('isodiff')
gta.free_sources(distance=3, pars='norm')
gta.free_sources(minmax_ts=[100, None], pars='norm')
gta.fit(optimizer='NEWMINUIT', reoptimize=True)
maps = gta.residmap(f'../maps/opt_alternating{i}', model=model, make_plots=True)
maps = gta.tsmap(f'../maps/opt_alternating_{i}', model=model, make_plots=True)
gta.write_roi(f'opt_{i}', make_plots=True)
likelihoods[i-1] = - gta.like()
np.savetxt('optimization_process_likes_alternating.dat', likelihoods)
def FGES_BinnedAnalysis(prefix, ANALYSISDIR, numsources, xmlsources, spectrum,
spectrumpoints, spectrumpointsUL, spectrum_mev_or_erg,
spectrum_mev_or_tev, configfile):
ANALYSISDIR = ANALYSISDIR + prefix + '/'
i = numsources #number of sources
sources_names = ''
for x in range(0, i):
sources_names += str(xmlsources[x])
#Run the likelihood analysis up to doing the fit
gta = GTAnalysis(ANALYSISDIR + configfile, logging={'verbosity': 3})
gta.setup()
#Print the pre likelihood fit parameters
gta.print_roi()
for x in range(0, i):
print(gta.roi[xmlsources[x]])
#Do an initial optimization of parameters
gta.optimize()
gta.print_roi()
#Prepare to get the likelihood
#Free the normalizations of sources within 7 degrees of the center of the field of view
gta.free_sources(distance=7.0, pars='norm')
gta.free_source('galdiff')
gta.free_source('isodiff')
for x in range(0, i):
gta.free_source(xmlsources[x])
#LIKELIHOOD ANALYSIS
fit_results = gta.fit()
#print out and return the results
print('Fit Quality: ', fit_results['fit_quality'])
for x in range(0, i):
print(gta.roi[xmlsources[x]])
gta.write_roi(sources_names + 'fit')
#RESIDUAL MAP
model = {'Index': 2.0, 'SpatialModel': 'PointSource'}
maps = gta.residmap('residual', model=model, make_plots=True)
# Generate residual map with source of interest removed from the model
model_nosource = {'Index': 2.0, 'SpatialModel': 'PointSource'}
maps_nosource = gta.residmap('residual_wsource',
model=model_nosource,
exclude=xmlsources,
make_plots=True)
#TS Map
tsmap = gta.tsmap('tsmap',
model={
'SpatialModel': 'PointSource',
'Index': 2.0
},
exclude=xmlsources,
make_plots=True)
tsmap_wSNR = gta.tsmap('tsmap_wSNR',
model={
'SpatialModel': 'PointSource',
'Index': 2.0
},
make_plots=True)
#PLOT SEDs
for x in range(0, i):
c = np.load('10to500gev/' + sources_names + 'fit.npy').flat[0]
sorted(c['sources'].keys())
c['sources'][xmlsources[x]]['flux']
print(c['sources'][xmlsources[x]]['param_names'][:4])
print(c['sources'][xmlsources[x]]['param_values'][:4])
c['sources'][xmlsources[x]]['ts']
E = np.array(c['sources'][xmlsources[x]]['model_flux']['energies'])
dnde = np.array(c['sources'][xmlsources[x]]['model_flux']['dnde'])
dnde_hi = np.array(
c['sources'][xmlsources[x]]['model_flux']['dnde_hi'])
dnde_lo = np.array(
c['sources'][xmlsources[x]]['model_flux']['dnde_lo'])
if spectrum_mev_or_erg == "erg":
suffix = 'erg'
mult = 0.00000160218
elif spectrum_mev_or_erg == "mev":
suffix = 'MeV'
mult = 1
if spectrum_mev_or_tev == "mev":
xaxis = 'MeV'
denominator = 1
elif spectrum_mev_or_tev == "tev":
xaxis = 'TeV'
denominator = 1000000
if spectrum:
plt.loglog(E, (E**2) * dnde, 'k--')
plt.loglog(E, (E**2) * dnde_hi, 'k')
plt.loglog(E, (E**2) * dnde_lo, 'k')
plt.xlabel('E [MeV]')
plt.ylabel(r'E$^2$ dN/dE [MeV cm$^{-2}$ s$^{-1}$]')
plt.savefig('spectrum_' + xmlsources[x] + '.png')
#GET SED POINTS
if spectrumpoints:
sed = gta.sed(xmlsources[x], make_plots=True)
#sed = gta.sed(xmlsource,prefix=xmlsource + 'spectrum',loge_bins=)
src = gta.roi[xmlsources[x]]
#Plot without upper limits
plt.loglog(E, (E**2) * dnde, 'k--')
plt.loglog(E, (E**2) * dnde_hi, 'k')
plt.loglog(E, (E**2) * dnde_lo, 'k')
plt.errorbar(np.array(sed['e_ctr']),
sed['e2dnde'],
yerr=sed['e2dnde_err'],
fmt='o')
plt.xlabel('E [MeV]')
plt.ylabel(r'E$^{2}$ dN/dE [MeV cm$^{-2}$ s$^{-1}$]')
#plt.show()
plt.savefig('spectrumpoints_' + xmlsources[x] + '.png')
#Plot with upper limits, last 5 points
plt.loglog(E, (E**2) * dnde, 'k--')
plt.loglog(E, (E**2) * dnde_hi, 'k')
plt.loglog(E, (E**2) * dnde_lo, 'k')
plt.errorbar(sed['e_ctr'][:-5],
sed['e2dnde'][:-5],
yerr=sed['e2dnde_err'][:-5],
fmt='o')
plt.errorbar(np.array(sed['e_ctr'][-5:]),
sed['e2dnde_ul95'][-5:],
yerr=0.2 * sed['e2dnde_ul95'][-5:],
fmt='o',
uplims=True)
plt.xlabel('E [MeV]')
plt.ylabel(r'E$^{2}$ dN/dE [MeV cm$^{-2}$ s$^{-1}$]')
plt.savefig('spectrumpointsUL_' + xmlsources[x] + '.png')
plt.clf()
description = "Run fermipy analysis chain."
parser = argparse.ArgumentParser(usage=usage,description=description)
parser.add_argument('--config', default = 'sample_config.yaml')
args = parser.parse_args()
gta = GTAnalysis(args.config)
gta.setup()
# Iteratively optimize all components in the ROI
gta.optimize()
# Fix sources w/ significance < 10
gta.free_sources(cuts=('Detection_Significance',0,10),free=False)
# Free sources within 3 degrees of ROI center
gta.free_sources(distance=3.0)
# Free sources by name
gta.free_source('mkn421')
gta.free_source('galdiff')
gta.free_source('isodiff')
# Free only the normalization of a specific source
gta.free_norm('3FGL J1129.0+3705')
gta.fit()
# Compute the SED for a source
def _process_lc_bin(itime, name, config, basedir, workdir, diff_sources, const_spectrum, roi, lck_params,
**kwargs):
i, time = itime
roi = copy.deepcopy(roi)
config = copy.deepcopy(config)
config['selection']['tmin'] = time[0]
config['selection']['tmax'] = time[1]
# create output directories labeled in MET vals
outdir = basedir + 'lightcurve_%.0f_%.0f' % (time[0], time[1])
config['fileio']['outdir'] = os.path.join(workdir, outdir)
config['logging']['prefix'] = 'lightcurve_%.0f_%.0f ' % (time[0], time[1])
config['fileio']['logfile'] = os.path.join(config['fileio']['outdir'],
'fermipy.log')
utils.mkdir(config['fileio']['outdir'])
yaml.dump(utils.tolist(config),
open(os.path.join(config['fileio']['outdir'],
'config.yaml'), 'w'))
xmlfile = os.path.join(config['fileio']['outdir'], 'base.xml')
try:
from fermipy.gtanalysis import GTAnalysis
gta = GTAnalysis(config, roi, loglevel=logging.DEBUG)
gta.logger.info('Fitting time range %i %i' % (time[0], time[1]))
gta.setup()
except:
print('Analysis failed in time range %i %i' %
(time[0], time[1]))
print(sys.exc_info()[0])
raise
return {}
gta._lck_params = lck_params
# Recompute source map for source of interest and sources within 3 deg
if gta.config['gtlike']['use_scaled_srcmap']:
names = [s.name for s in
gta.roi.get_sources(distance=3.0, skydir=gta.roi[name].skydir)
if not s.diffuse]
gta.reload_sources(names)
# Write the current model
gta.write_xml(xmlfile)
# Optimize the model
gta.optimize(skip=diff_sources,
shape_ts_threshold=kwargs.get('shape_ts_threshold'))
fit_results = _fit_lc(gta, name, **kwargs)
gta.write_xml('fit_model_final.xml')
srcmodel = copy.deepcopy(gta.get_src_model(name))
numfree = gta.get_free_param_vector().count(True)
const_srcmodel = gta.get_src_model(name).copy()
fixed_fit_results = fit_results.copy()
fixed_srcmodel = gta.get_src_model(name).copy()
fixed_fit_results['fit_success'],fixed_srcmodel['fit_success'] = [False,False]
fixed_fit_results['fit_quality'],fixed_srcmodel['fit_quality'] = [0,0]
max_ts_thresholds = [None, 4, 9, 16, 25]
for max_ts in max_ts_thresholds:
if max_ts is not None:
gta.free_sources(minmax_ts=[None, max_ts], free=False, exclude=[name])
# rerun fit using params from full time (constant) fit using same
# param vector as the successful fit to get loglike
specname, spectrum = const_spectrum
gta.set_source_spectrum(name, spectrum_type=specname,
spectrum_pars=spectrum,
update_source=False)
gta.free_source(name, free=False)
const_fit_results = gta.fit()
if not const_fit_results['fit_success']:
continue
const_srcmodel = gta.get_src_model(name)
# rerun using shape fixed to full time fit
# for the fixed-shape lightcurve
gta.free_source(name, pars='norm')
fixed_fit_results = gta.fit()
if not fixed_fit_results['fit_success']:
continue
fixed_srcmodel = gta.get_src_model(name)
break
# special lc output
o = {'flux_const': const_srcmodel['flux'],
'loglike_const': const_fit_results['loglike'],
'fit_success': fit_results['fit_success'],
'fit_success_fixed': fixed_fit_results['fit_success'],
'fit_quality': fit_results['fit_quality'],
'fit_status': fit_results['fit_status'],
'num_free_params': numfree,
'config': config}
# full flux output
if fit_results['fit_success'] == 1:
for k in defaults.source_flux_output.keys():
if not k in srcmodel:
continue
o[k] = srcmodel[k]
o[k+'_fixed'] = fixed_srcmodel[k]
gta.logger.info('Finished time range %i %i' % (time[0], time[1]))
return o
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError(
"Trying to run fermipy analysis, but don't have ST")
if is_null(args.skydirs):
skydir_dict = None
else:
skydir_dict = load_yaml(args.skydirs)
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
#gta.setup(overwrite=False)
gta.load_roi(args.roi_baseline)
gta.print_roi()
basedir = os.path.dirname(args.config)
# This should be a no-op, b/c it was done in the baseline analysis
for profile in args.profiles:
if skydir_dict is None:
skydir_keys = [None]
else:
skydir_keys = sorted(skydir_dict.keys())
for skydir_key in skydir_keys:
if skydir_key is None:
pkey, pdict = AnalyzeSED._build_profile_dict(
basedir, profile)
else:
skydir_val = skydir_dict[skydir_key]
pkey, pdict = AnalyzeSED._build_profile_dict(
basedir, profile)
pdict['ra'] = skydir_val['ra']
pdict['dec'] = skydir_val['dec']
pkey += "_%06i" % skydir_key
outfile = "sed_%s.fits" % pkey
# Add the source and get the list of correlated soruces
correl_dict = add_source_get_correlated(gta,
pkey,
pdict,
correl_thresh=0.25)
# Write the list of correlated sources
correl_yaml = os.path.join(basedir, "correl_%s.yaml" % pkey)
write_yaml(correl_dict, correl_yaml)
gta.free_sources(False)
for src_name in correl_dict.keys():
gta.free_source(src_name, pars='norm')
# build the SED
gta.sed(pkey, outfile=outfile, make_plots=args.make_plots)
# remove the source
gta.delete_source(pkey)
# put the ROI back to how it was
gta.load_xml(args.roi_baseline)
return gta
def _process_lc_bin(itime, name, config, basedir, workdir, diff_sources, const_spectrum, roi, lck_params,
**kwargs):
i, time = itime
roi = copy.deepcopy(roi)
config = copy.deepcopy(config)
config['selection']['tmin'] = time[0]
config['selection']['tmax'] = time[1]
# create output directories labeled in MET vals
outdir = basedir + 'lightcurve_%.0f_%.0f' % (time[0], time[1])
config['fileio']['outdir'] = os.path.join(workdir, outdir)
config['logging']['prefix'] = 'lightcurve_%.0f_%.0f ' % (time[0], time[1])
config['fileio']['logfile'] = os.path.join(config['fileio']['outdir'],
'fermipy.log')
utils.mkdir(config['fileio']['outdir'])
yaml.dump(utils.tolist(config),
open(os.path.join(config['fileio']['outdir'],
'config.yaml'), 'w'))
xmlfile = os.path.join(config['fileio']['outdir'], 'base.xml')
try:
from fermipy.gtanalysis import GTAnalysis
gta = GTAnalysis(config, roi, loglevel=logging.DEBUG)
gta.logger.info('Fitting time range %i %i' % (time[0], time[1]))
gta.setup()
except:
print('Analysis failed in time range %i %i' %
(time[0], time[1]))
print(sys.exc_info()[0])
raise
return {}
gta._lck_params = lck_params
# Recompute source map for source of interest and sources within 3 deg
if gta.config['gtlike']['use_scaled_srcmap']:
names = [s.name for s in
gta.roi.get_sources(distance=3.0, skydir=gta.roi[name].skydir)
if not s.diffuse]
gta.reload_sources(names)
# Write the current model
gta.write_xml(xmlfile)
# Optimize the model
gta.optimize(skip=diff_sources,
shape_ts_threshold=kwargs.get('shape_ts_threshold'))
fit_results = _fit_lc(gta, name, **kwargs)
gta.write_xml('fit_model_final.xml')
srcmodel = copy.deepcopy(gta.get_src_model(name))
numfree = gta.get_free_param_vector().count(True)
max_ts_thresholds = [None, 4, 9]
for max_ts in max_ts_thresholds:
if max_ts is not None:
gta.free_sources(minmax_ts=[None, max_ts], free=False, exclude=[name])
# rerun fit using params from full time (constant) fit using same
# param vector as the successful fit to get loglike
specname, spectrum = const_spectrum
gta.set_source_spectrum(name, spectrum_type=specname,
spectrum_pars=spectrum,
update_source=False)
gta.free_source(name, free=False)
const_fit_results = gta.fit()
if not const_fit_results['fit_success']:
continue
const_srcmodel = gta.get_src_model(name)
# rerun using shape fixed to full time fit
# for the fixed-shape lightcurve
gta.free_source(name, pars='norm')
fixed_fit_results = gta.fit()
if not fixed_fit_results['fit_success']:
continue
fixed_srcmodel = gta.get_src_model(name)
break
# special lc output
o = {'flux_const': const_srcmodel['flux'],
'loglike_const': const_fit_results['loglike'],
'fit_success': fit_results['fit_success'],
'fit_success_fixed': fixed_fit_results['fit_success'],
'fit_quality': fit_results['fit_quality'],
'fit_status': fit_results['fit_status'],
'num_free_params': numfree,
'config': config}
# full flux output
if fit_results['fit_success'] == 1:
for k in defaults.source_flux_output.keys():
if not k in srcmodel:
continue
o[k] = srcmodel[k]
o[k+'_fixed'] = fixed_srcmodel[k]
gta.logger.info('Finished time range %i %i' % (time[0], time[1]))
return o
class ExtensionFit:
def __init__(self, configFile):
self.gta = GTAnalysis(configFile, logging={'verbosity': 3})
self.target = None
self.targetRadius = None
self.distance = None
self.catalog = fits.getdata('/users-data/mfalxa/code/gll_psch_v13.fit',
1)
def setSourceName(self, sourceObject, newName):
self.gta.delete_source(sourceObject['name'])
self.gta.add_source(newName, sourceObject)
''' INITIALIZE '''
def initialize(self, sizeROI, rInner, addToROI, TSMin, debug):
self.gta.setup()
if self.gta.config['selection']['emin'] >= 10000:
self.gta.set_parameter('galdiff', 'Scale', 30000)
if debug == True:
self.gta.make_plots('startAll')
self.gta.residmap(prefix='startAll', make_plots=True)
# Get model source names
sourceList = self.gta.get_sources(exclude=['isodiff', 'galdiff'])
# Delete sources unassociated with TS < 50
for i in range(len(sourceList)):
if sourceList[i]['catalog']['TS_value'] < TSMin and self.catalog[
'CLASS'][self.catalog['Source_Name'] == sourceList[i]
['name']][0] == '':
self.gta.delete_source(sourceList[i]['name'])
closests = self.gta.get_sources(distance=rInner,
exclude=['isodiff', 'galdiff'])
# Delete all unidentified sources
for i in range(len(closests)):
if self.catalog['CLASS'][self.catalog['Source_Name'] == closests[i]
['name']][0].isupper() == False:
self.gta.delete_source(closests[i]['name'])
if self.catalog['CLASS'][self.catalog['Source_Name'] == closests[i]
['name']][0] == 'SFR':
self.target = closests[i]
self.setSourceName(self.target, 'TESTSOURCE')
# If debug, save ROI and make plots
if debug == True:
self.gta.write_roi('startModel')
self.gta.residmap(prefix='start', make_plots=True)
self.gta.make_plots('start')
# Optmize spectral parameters for sources with npred > 1
self.gta.optimize(npred_threshold=1, skip=['isodiff'])
# Get model source names
sourceList = self.gta.get_sources(distance=sizeROI + addToROI,
square=True,
exclude=['isodiff', 'galdiff'])
# Iterate source localizing on source list
for i in range(len(sourceList)):
if sourceList[i].extended == False:
self.gta.localize(sourceList[i]['name'],
write_fits=False,
write_npy=False,
update=True)
# Free sources within ROI size + extra distance from center
self.gta.free_sources(distance=sizeROI + addToROI, square=True)
# Re-optimize ROI
self.gta.optimize(skip=['isodiff'])
# Save and make plots if debug
if debug == True:
self.gta.write_roi('modelInitialized')
self.gta.residmap(prefix='initialized', make_plots=True)
self.gta.make_plots('initialized')
# Lock sources
self.gta.free_sources(free=False)
''' OUTER REGION '''
def outerRegionAnalysis(self, sizeROI, rInner, sqrtTsThreshold,
minSeparation, debug):
self.gta.free_sources(distance=sizeROI,
pars='norm',
square=True,
free=True)
self.gta.free_sources(distance=rInner, free=False)
self.gta.free_source('galdiff', free=True)
self.gta.free_source('isodiff', free=False)
# Seek new sources until none are found
sourceModel = {
'SpectrumType': 'PowerLaw',
'Index': 2.0,
'Scale': 30000,
'Prefactor': 1.e-15,
'SpatialModel': 'PointSource'
}
newSources = self.gta.find_sources(sqrt_ts_threshold=sqrtTsThreshold,
min_separation=minSeparation,
model=sourceModel,
**{
'search_skydir':
self.gta.roi.skydir,
'search_minmax_radius':
[rInner, sizeROI]
})
if len(newSources) > 0:
for i in range(len(newSources)):
if newSources['sources'][i]['ts'] > 100.:
self.gta.set_source_spectrum(
newSources['sources'][i]['name'],
spectrum_type='LogParabola')
self.gta.free_source(newSources['sources'][i]['name'])
self.gta.fit()
self.gta.free_source(newSources['sources'][i]['name'],
free=False)
# Optimize all ROI
self.gta.optimize(skip=['isodiff'])
# Save sources found
if debug == True:
self.gta.residmap(prefix='outer', make_plots=True)
self.gta.write_roi('outerAnalysisROI')
self.gta.make_plots('outer')
''' INNER REGION '''
def innerRegionAnalysis(self, sizeROI, rInner, maxIter, sqrtTsThreshold,
minSeparation, dmMin, TSm1Min, TSextMin, debug):
self.gta.free_sources(distance=sizeROI, square=True, free=False)
self.gta.free_sources(distance=rInner, free=True, exclude=['isodiff'])
# Keep closest source if identified with star forming region in catalog or look for new source closest to center within Rinner
if self.target != None:
print('Closest source identified with star forming region : ',
self.target['name'])
self.gta.set_source_morphology('TESTSOURCE',
**{'spatial_model': 'PointSource'})
else:
closeSources = self.gta.find_sources(sqrt_ts_threshold=2.,
min_separation=minSeparation,
max_iter=1,
**{
'search_skydir':
self.gta.roi.skydir,
'search_minmax_radius':
[0., rInner]
})
dCenter = np.array([])
for i in range(len(closeSources['sources'])):
dCenter = np.append(
dCenter,
self.gta.roi.skydir.separation(
closeSources['sources'][i].skydir).value)
self.target = closeSources['sources'][np.argmin(dCenter)]
print('Target name : ', self.target['name'])
self.setSourceName(self.target, 'TESTSOURCE')
for i in [
x for x in range(len(closeSources['sources']))
if x != (np.argmin(dCenter))
]:
self.gta.delete_source(closeSources['sources'][i]['name'])
self.gta.optimize(skip=['isodiff'])
# Initialize n sources array
nSources = []
# Save ROI without extension fit
self.gta.write_roi('nSourcesFit')
if debug == True:
self.gta.make_plots('innerInit')
self.gta.residmap(prefix='innerInit', make_plots=True)
# Test for extension
extensionTest = self.gta.extension('TESTSOURCE',
make_plots=True,
write_npy=debug,
write_fits=debug,
spatial_model='RadialDisk',
update=True,
free_background=True,
fit_position=True)
extLike = extensionTest['loglike_ext']
TSext = extensionTest['ts_ext']
print('TSext : ', TSext)
extAIC = 2 * (len(self.gta.get_free_param_vector()) -
self.gta._roi_data['loglike'])
self.gta.write_roi('extFit')
if debug == True:
self.gta.residmap(prefix='ext0', make_plots=True)
self.gta.make_plots('ext0')
self.gta.load_roi('nSourcesFit', reload_sources=True)
for i in range(1, maxIter + 1):
# Test for n point sources
nSourcesTest = self.gta.find_sources(
sources_per_iter=1,
sqrt_ts_threshold=sqrtTsThreshold,
min_separation=minSeparation,
max_iter=1,
**{
'search_skydir': self.gta.roi.skydir,
'search_minmax_radius': [0., rInner]
})
if len(nSourcesTest['sources']) > 0:
if nSourcesTest['sources'][0]['ts'] > 100.:
self.gta.set_source_spectrum(
nSourcesTest['sources'][0]['name'],
spectrum_type='LogParabola')
self.gta.free_source(nSourcesTest['sources'][0]['name'])
self.gta.fit()
self.gta.free_source(nSourcesTest['sources'][0]['name'],
free=False)
if debug == True:
self.gta.make_plots('nSources' + str(i))
nSources.append(nSourcesTest['sources'])
self.gta.localize(nSourcesTest['sources'][0]['name'],
write_npy=debug,
write_fits=debug,
update=True)
nAIC = 2 * (len(self.gta.get_free_param_vector()) -
self.gta._roi_data['loglike'])
self.gta.free_source(nSourcesTest['sources'][0]['name'],
free=True)
self.gta.residmap(prefix='nSources' + str(i), make_plots=True)
self.gta.write_roi('n1SourcesFit')
# Estimate Akaike Information Criterion difference between both models
dm = extAIC - nAIC
print('AIC difference between both models = ', dm)
# Estimate TS_m+1
extensionTestPlus = self.gta.extension(
'TESTSOURCE',
make_plots=True,
write_npy=debug,
write_fits=debug,
spatial_model='RadialDisk',
update=True,
free_background=True,
fit_position=True)
TSm1 = 2 * (extensionTestPlus['loglike_ext'] - extLike)
print('TSm+1 = ', TSm1)
if debug == True:
self.gta.residmap(prefix='ext' + str(i), make_plots=True)
self.gta.make_plots('ext' + str(i))
if dm < dmMin and TSm1 < TSm1Min:
self.gta.load_roi('extFit', reload_sources=True)
break
else:
# Set extension test to current state and save current extension fit ROI and load previous nSources fit ROI
extensionTest = extensionTestPlus
extLike = extensionTestPlus['loglike_ext']
TSext = extensionTestPlus['ts_ext']
print('TSext : ', TSext)
extAIC = 2 * (len(self.gta.get_free_param_vector()) -
self.gta._roi_data['loglike'])
self.gta.write_roi('extFit')
self.gta.load_roi('n1SourcesFit', reload_sources=True)
self.gta.write_roi('nSourcesFit')
else:
if TSext > TSextMin:
self.gta.load_roi('extFit', reload_sources=True)
break
else:
self.gta.load_roi('nSourcesFit', reload_sources=True)
break
self.gta.fit()
# Get source radius depending on spatial model
endSources = self.gta.get_sources()
for i in range(len(endSources)):
if endSources[i]['name'] == 'TESTSOURCE':
self.target = endSources[i]
self.distance = self.gta.roi.skydir.separation(
endSources[i].skydir).value
if endSources[i].extended == True:
self.targetRadius = endSources[i]['SpatialWidth']
else:
self.targetRadius = endSources[i]['pos_r95']
''' CHECK OVERLAP '''
def overlapDisk(self, rInner, radiusCatalog):
print('Target radius : ', self.targetRadius)
# Check radius sizes
if radiusCatalog < self.targetRadius:
r = float(radiusCatalog)
R = float(self.targetRadius)
else:
r = float(self.targetRadius)
R = float(radiusCatalog)
# Estimating overlapping area
d = self.distance
print('Distance from center : ', d)
if d < (r + R):
if R < (r + d):
area = r**2 * np.arccos(
(d**2 + r**2 - R**2) / (2 * d * r)) + R**2 * np.arccos(
(d**2 + R**2 - r**2) / (2 * d * R)) - 0.5 * np.sqrt(
(-d + r + R) * (d + r - R) * (d - r + R) *
(d + r + R))
overlap = round((area / (np.pi * r**2)) * 100, 2)
else:
area = np.pi * r**2
overlap = 100.0
else:
area = 0.
overlap = 0.
print('Overlapping surface : ', area)
print('Overlap : ', overlap)
if overlap > 68. and self.distance < rInner:
associated = True
else:
associated = False
return associated
''' CHECK UPPER LIMIT '''
def upperLimit(self, name, radius):
sourceModel = {
'SpectrumType': 'PowerLaw',
'Index': 2.0,
'Scale': 30000,
'Prefactor': 1.e-15,
'SpatialModel': 'RadialDisk',
'SpatialWidth': radius,
'glon': self.gta.config['selection']['glon'],
'glat': self.gta.config['selection']['glat']
}
self.gta.add_source(name, sourceModel, free=True)
self.gta.fit()
self.gta.residmap(prefix='upperLimit', make_plots=True)
print('Upper limit : ', self.gta.get_sources()[0]['flux_ul95'])
f.write(os.path.join(od, 'ft1_00.fits') + '\n')
# modify base config to include merged files
with open(BASE_CONFIG) as infile, \
open(CONFIG_FINAL_FILE, 'w') as outfile:
config = yaml.load(infile)
config['data']['evfile'] = os.path.join(os.getcwd(), FT1_FILES_LIST)
config['data']['ltcube'] = os.path.join(os.getcwd(), LTCUBE_FINAL_FILE)
config['fileio'] = {'outdir': 'out_merged/'}
outfile.write('# Automatically merged from directories:\n')
for outdir in outdirs:
outfile.write('# {}\n'.format(outdir))
outfile.write('\n')
yaml.dump(config, outfile, indent=4)
# some generic processing just for sanity check
gta = GTAnalysis(CONFIG_FINAL_FILE, logging={'verbosity': 3})
gta.setup()
gta.free_source('4FGL J1512.8-0906', free=True, pars=['Index'])
gta.free_source('4FGL J1512.8-0906', free=True, pars='norm')
# Free Normalization of all Sources within 3 deg of ROI center
gta.free_sources(distance=3.0, pars='norm')
# Free all parameters of isotropic and galactic diffuse components
gta.free_source('galdiff')
gta.free_source('isodiff')
gta.optimize()
gta.print_roi()
fit_res = gta.fit()
print('Fit Quality: ', fit_res['fit_quality'])
print(gta.roi['4FGL J1512.8-0906'])
