def main():
# validate the parameters
if len(sys.argv) < 3:
usage()
assertCurrentJython()
logger.info(CONFIG)
grinderData = sys.argv[1]
grinderDataFiles = []
grinderOutFile = sys.argv[2]
if len(grinderOutFile.split()) > 1:
logger.fatal("FATAL: grinder analyzer only supports using a single out_* file")
usage()
agents = 1
if len(sys.argv) < 4:
logger.warn("Optional TPS multiplier not set. Using 1")
else:
agents = int(sys.argv[3])
# build the list of grinder data files specified on the command line
for grinderDataFile in grinderData.strip().split(" "):
if grinderDataFile is "":
continue
if tail(grinderDataFile, CONFIG.buckets + 1, ignoreBlankLines=True).__len__() < CONFIG.buckets:
logger.fatal("")
logger.fatal("FATAL: insufficient test data to graph. conf/analyzer.properties specifies")
logger.fatal(" " + str(CONFIG.buckets) + " buckets, but " + grinderDataFile + " contains")
logger.fatal(" less than " + str(CONFIG.buckets) + " data points.")
sys.exit(1)
grinderDataFiles.append(grinderDataFile)
if grinderDataFile.rfind("data_") < 0:
logger.fatal("Invalid grinder data file: " + grinderDataFile)
usage()
logger.info("Grinder data files specified: %d" % grinderDataFiles.__len__())
if grinderOutFile.rfind("out_") < 0:
logger.fatal("Invalid grinder out file: " + grinderOutFile)
usage()
summaryData = SummaryDataRegistry(grinderOutFile)
# generate HTML report
reporter = ga.report.getReporter(grinderOutFile, summaryData)
reporter.readGrinderOutFile(summaryData)
# generate the graphs
analyzer = ClientLogAnalyzer(grinderDataFiles, summaryData, agents)
transactions = analyzer.getTransactionMap()
for transactionNumber in transactions.keys():
datasets = analyzer.getDataSets(transactionNumber)
transactionName = transactions[transactionNumber]
perfDatasets = [datasets[TX_SEC_KEY], datasets[SIMPLE_RESPONSE_TIME_KEY]]
perfGrapher = ga.graph.PerformanceGrapher(perfDatasets, transactionName, TEST_START_TIME)
perfGrapher.saveChartToDisk(CONFIG.reportDir)
# BAIL HERE if non-http
if not VORPAL.getPlugin("analyzer").isHTTP():
continue
bw = ga.graph.BandwidthGrapher([datasets[THROUGHPUT_KEY]], transactionName, TEST_START_TIME)
bw.saveChartToDisk(CONFIG.reportDir)
rtGrapher = ga.graph.ResponseTimeGrapher([datasets[FULL_RESPONSE_TIME_KEY]], transactionName, TEST_START_TIME)
rtGrapher.saveChartToDisk(CONFIG.reportDir)
reporter.writeReportToFile()
logger.warn("Log file analysis completed successfully.")
def _setTestDuration_(self, grinderDataFile):
""" Determine the duration of the test by reading the timestamps
from the first and last lines of the data files. """
maxElapsedTime = long(0)
elapsedTime = 0
for grinderDataFile in self.dataFiles:
# grinder data is not guaranteed to be in chronological order.
# look at the last 200 lines to find the max elapsed time
# value.
for line in tail(grinderDataFile, 200, ignoreBlankLines=True):
# Trilok Khairnar's fix for data file containing < 200 lines
elapsedTimeword = line.split(",")[ELAPSED_TIME_COLUMN].strip()
if elapsedTimeword.find("tart") < 0: # skip the header row for G 3.0 and 3.1
elapsedTime = long(elapsedTimeword) - TEST_START_TIME
if elapsedTime > maxElapsedTime:
maxElapsedTime = elapsedTime
self.msPerBucket = maxElapsedTime / CONFIG.buckets + 1 # round up
# TODO -- make determining max time more bulletproof. Perhaps detect file
# size and tail more lines for larger files.
maxElapsedTime = long(maxElapsedTime * 1.00) # add a 1% safety factor
self.maxElapsedTime = maxElapsedTime - TEST_START_TIME
logger.debug("DEBUG: Max elapsed time == " + str(self.maxElapsedTime))
def _setTestDuration_(self, grinderDataFile):
''' Determine the duration of the test by reading the timestamps
from the first and last lines of the data files. '''
maxElapsedTime = long(0)
elapsedTime = 0
for grinderDataFile in self.dataFiles:
# grinder data is not guaranteed to be in chronological order.
# look at the last 200 lines to find the max elapsed time
# value.
for line in tail(grinderDataFile, 200, ignoreBlankLines=True):
# Trilok Khairnar's fix for data file containing < 200 lines
elapsedTimeword = line.split(",")[ELAPSED_TIME_COLUMN].strip()
if elapsedTimeword.find(
"tart") < 0: # skip the header row for G 3.0 and 3.1
elapsedTime = long(elapsedTimeword) - TEST_START_TIME
if elapsedTime > maxElapsedTime:
maxElapsedTime = elapsedTime
self.msPerBucket = maxElapsedTime / CONFIG.buckets + 1 # round up
#TODO -- make determining max time more bulletproof. Perhaps detect file
# size and tail more lines for larger files.
maxElapsedTime = long(maxElapsedTime * 1.00) # add a 1% safety factor
self.maxElapsedTime = maxElapsedTime - TEST_START_TIME
logger.debug("DEBUG: Max elapsed time == " + str(self.maxElapsedTime))
def main():
# validate the parameters
if len(sys.argv) < 3:
usage()
assertCurrentJython()
logger.info(CONFIG)
grinderData = sys.argv[1]
grinderDataFiles = []
grinderOutFile = sys.argv[2]
if len(grinderOutFile.split()) > 1:
logger.fatal(
"FATAL: grinder analyzer only supports using a single out_* file")
usage()
agents = 1
if len(sys.argv) < 4:
logger.warn("Optional TPS multiplier not set. Using 1")
else:
agents = int(sys.argv[3])
# build the list of grinder data files specified on the command line
for grinderDataFile in grinderData.strip().split(' '):
if grinderDataFile is '':
continue
if tail(grinderDataFile, CONFIG.buckets + 1,
ignoreBlankLines=True).__len__() < CONFIG.buckets:
logger.fatal("")
logger.fatal(
"FATAL: insufficient test data to graph. conf/analyzer.properties specifies"
)
logger.fatal(" " + str(CONFIG.buckets) + " buckets, but " +
grinderDataFile + " contains")
logger.fatal(" less than " + str(CONFIG.buckets) +
" data points.")
sys.exit(1)
grinderDataFiles.append(grinderDataFile)
if grinderDataFile.rfind("data_") < 0:
logger.fatal("Invalid grinder data file: " + grinderDataFile)
usage()
logger.info("Grinder data files specified: %d" %
grinderDataFiles.__len__())
if grinderOutFile.rfind("out_") < 0:
logger.fatal("Invalid grinder out file: " + grinderOutFile)
usage()
summaryData = SummaryDataRegistry(grinderOutFile)
# generate HTML report
reporter = ga.report.getReporter(grinderOutFile, summaryData)
reporter.readGrinderOutFile(summaryData)
# generate the graphs
analyzer = ClientLogAnalyzer(grinderDataFiles, summaryData, agents)
transactions = analyzer.getTransactionMap()
for transactionNumber in transactions.keys():
datasets = analyzer.getDataSets(transactionNumber)
transactionName = transactions[transactionNumber]
perfDatasets = [
datasets[TX_SEC_KEY], datasets[SIMPLE_RESPONSE_TIME_KEY]
]
perfGrapher = ga.graph.PerformanceGrapher(perfDatasets,
transactionName,
TEST_START_TIME)
perfGrapher.saveChartToDisk(CONFIG.reportDir)
# BAIL HERE if non-http
if not VORPAL.getPlugin("analyzer").isHTTP():
continue
bw = ga.graph.BandwidthGrapher([datasets[THROUGHPUT_KEY]],
transactionName, TEST_START_TIME)
bw.saveChartToDisk(CONFIG.reportDir)
rtGrapher = ga.graph.ResponseTimeGrapher(
[datasets[FULL_RESPONSE_TIME_KEY]], transactionName,
TEST_START_TIME)
rtGrapher.saveChartToDisk(CONFIG.reportDir)
reporter.writeReportToFile()
logger.warn("Log file analysis completed successfully.")
