Beispiel #1
0
def test_nexus_set_forceplate_data():
    """Test forceplate data setter"""
    start_nexus()
    vicon = nexus.viconnexus()
    subj = 'D0063_RR'
    trialname = '2018_12_17_preOp_RR06.c3d'
    session = 'autoproc_session'
    trialpath = _trial_path(subj, trialname, session=session)
    nexus._open_trial(trialpath)
    meta = nexus._get_metadata(vicon)
    data_len = int(meta['length'] * meta['samplesperframe'])
    # set data to ones
    data = np.ones((data_len, 3))
    # invalid plate index
    with pytest.raises(RuntimeError):
        nexus.set_forceplate_data(vicon, 4, data)
    # invalid arg
    with pytest.raises(ValueError):
        nexus.set_forceplate_data(vicon, 0, data, kind='foo')
    # the setter writes data in device local coords
    nexus.set_forceplate_data(vicon, 0, data)
    # try reading the data back
    # get device id corresponding to plate index
    devid = nexus._get_forceplate_ids(vicon)[0]
    fpdata = nexus._get_1_forceplate_data(vicon, devid)
    F_read = fpdata['F']
    data_global = np.dot(fpdata['wR'], data.T).T
Beispiel #2
0
def test_autoproc():
    """Test autoprocessing.

    This requires preprocessing and model pipelines to be set up correctly in
    Nexus.
    """
    # SDK does not have open_session(), so we need to open a trial
    start_nexus()
    subj = 'D0063_RR'
    trialname = '2018_12_17_preOp_RR04.c3d'
    session = 'autoproc_session'
    trialpath = _trial_path(subj, trialname, session=session)
    nexus._open_trial(trialpath)
    # check that we ended up in correct session
    # (otherwise autoproc could take forever, or cause damage)
    assert 'autoproc' in str(nexus.get_sessionpath())
    # run the autoprocessing
    autoprocess.autoproc_session()
    # check the resulting c3d files
    for c3dn in [1, 4, 5, 6]:
        c3dname = '2018_12_17_preOp_RR0%d.c3d' % c3dn
        c3dpath = trialpath.parent / c3dname
        assert c3dpath.is_file()
        # check that dynamic files were modified in the last 10 minutes,
        # and static is older (unmodified by processing)
        mtime = datetime.fromtimestamp(c3dpath.lstat().st_mtime)
        if c3dn == 4:
            assert (datetime.now() - mtime).total_seconds() > 3600
        else:
            assert (datetime.now() - mtime).total_seconds() < 600
Beispiel #3
0
def test_nexus_reader():
    """Test basic data reading and Trial instance creation"""
    start_nexus()
    vicon = nexus.viconnexus()
    # from old Helsinki lab
    trialname = '2015_10_22_girl6v_IN13'
    subject = 'girl6v'
    trialpath = _trial_path(subject, trialname)
    nexus._open_trial(trialpath)
    tr = Trial(vicon)
    # XXX: probably with pytest, there is no benefit in using assert_equal
    assert_equal(tr.analograte, 1000.0)
    assert_equal(tr.framerate, 100.0)
    # assert_equal(tr.bodymass, 24.0)
    assert_equal(tr.subject_name, 'Iiris')
    assert_equal(tr.n_forceplates, 1)
    assert_equal(tr.samplesperframe, 10.0)
    assert_equal(tr.length, 488)
    assert_equal(tr.trialname, trialname)
    assert_equal(tr.ncycles, 5)
    assert_equal(tr.offset, 1)
    cycs = tr.get_cycles({'R': 'all'})
    cyc = cycs[1]
    assert_equal(cyc.start, 230)
    assert_equal(cyc.end, 321)
    assert_equal(cyc.context, 'R')
    assert_equal(cyc.on_forceplate, True)
    assert_equal(cyc.toeoff, 282)
    cyc = cycs[0]
    assert_equal(cyc.start, 145)
    assert_equal(cyc.context, 'R')
    assert_equal(cyc.on_forceplate, False)
    # from Trondheim
    trialname = 'astrid_080515_02'
    subject = 'adult_3fp'
    trialpath = _trial_path(subject, trialname)
    nexus._open_trial(trialpath)
    tr = Trial(vicon)
    assert_equal(tr.analograte, 1000.0)
    assert_equal(tr.framerate, 200.0)
    # assert_equal(tr.bodymass, 70.0)
    assert_equal(tr.subject_name, 'Astrid')
    assert_equal(tr.n_forceplates, 3)
    assert_equal(tr.samplesperframe, 5.0)
    assert_equal(tr.length, 1986)
    assert_equal(tr.trialname, trialname)
    assert_equal(tr.ncycles, 4)
    assert_equal(tr.offset, 1)
    cycs = tr.get_cycles({'L': 'all'})
    cyc = cycs[1]
    assert_equal(cyc.start, 1161)
    assert_equal(cyc.end, 1387)
    assert_equal(cyc.context, 'L')
    assert_equal(cyc.on_forceplate, True)
    assert_equal(cyc.toeoff, 1303)
Beispiel #4
0
def test_event_marking():
    """Test automarking of events"""
    start_nexus()
    vicon = nexus.viconnexus()
    ev_tol = 4  # tolerance for event marking (frames)
    events_dict = dict()  # ground truth with forceplate info
    events_dict['Right'] = dict()
    events_dict['Right']['Foot Strike'] = [384, 505, 616]
    events_dict['Right']['Foot Off'] = [465, 570]
    events_dict['Left'] = dict()
    events_dict['Left']['Foot Strike'] = [311, 441, 562]
    events_dict['Left']['Foot Off'] = [402, 517]
    events_dict_nofp = dict()  # ground truth without forceplate info
    events_dict_nofp['Right'] = dict()
    events_dict_nofp['Right']['Foot Strike'] = [379, 501, 613]
    events_dict_nofp['Right']['Foot Off'] = [468, 572]
    events_dict_nofp['Left'] = dict()
    events_dict_nofp['Left']['Foot Strike'] = [310, 440, 561]
    events_dict_nofp['Left']['Foot Off'] = [401, 516]

    def _events_check(events_dict):
        """Helper to check whether Nexus events are close to ground truth"""
        for context, contextdict in events_dict.items():
            for event_type, events in contextdict.items():
                nexus_events = vicon.GetEvents(vicon.GetSubjectNames()[0],
                                               context, event_type)[0]
                assert_equal(len(events), len(nexus_events))
                for j, ev in enumerate(nexus_events):
                    assert abs(ev - events[j]) <= ev_tol

    subj = 'girl6v'
    trialname = '2015_10_22_girl6v_IN02.c3d'
    trialpath = _trial_path(subj, trialname)
    nexus._open_trial(trialpath)

    # automatic thresholding (do not respect fp events)
    vicon.ClearAllEvents()
    evs = utils.automark_events(vicon, events_range=[-1500, 1500])
    nexus._create_events(vicon, evs)
    _events_check(events_dict_nofp)

    # using forceplate-based velocity thresholds
    vicon.ClearAllEvents()
    fpe = utils.detect_forceplate_events(vicon)
    mkrdata = read_data.get_marker_data(
        vicon,
        cfg.autoproc.left_foot_markers + cfg.autoproc.right_foot_markers)
    vel = utils._get_foot_contact_vel(mkrdata, fpe)
    evs = utils.automark_events(
        vicon,
        vel_thresholds=vel,
        events_range=[-1500, 1500],
    )
    nexus._create_events(vicon, evs)
    _events_check(events_dict)
Beispiel #5
0
def test_nexus_plot():
    """Test basic plot from Nexus"""
    start_nexus()
    vicon = nexus.viconnexus()
    trialname = '2015_10_22_girl6v_IN13'
    subject = 'girl6v'
    trialpath = _trial_path(subject, trialname)
    nexus._open_trial(trialpath)
    tr = Trial(vicon)
    pl = plots.plot_trials([tr], backend='matplotlib')
    assert isinstance(pl, Figure)
Beispiel #6
0
def test_nexus_get_forceplate_ids():
    """Test forceplate id getter"""
    start_nexus()
    vicon = nexus.viconnexus()
    subj = 'D0063_RR'
    trialname = '2018_12_17_preOp_RR06.c3d'
    session = 'autoproc_session'
    trialpath = _trial_path(subj, trialname, session=session)
    nexus._open_trial(trialpath)
    fpids = nexus._get_forceplate_ids(vicon)
    assert fpids == [1, 2, 3, 5]
Beispiel #7
0
def test_nexus_get_forceplate_data():
    """Test forceplate data getter"""
    start_nexus()
    vicon = nexus.viconnexus()
    subj = 'D0063_RR'
    trialname = '2018_12_17_preOp_RR06.c3d'
    session = 'autoproc_session'
    trialpath = _trial_path(subj, trialname, session=session)
    nexus._open_trial(trialpath)
    meta = nexus._get_metadata(vicon)
    # make a slice of relevant analog frames
    analog_roi = slice(*(int(x * meta['samplesperframe'])
                         for x in vicon.GetTrialRegionOfInterest()))
    fpdata_local = nexus._get_1_forceplate_data(vicon, 1, coords='local')
    fpdata_global = nexus._get_1_forceplate_data(vicon, 1, coords='global')
    # rotation and translation local -> global
    R = fpdata_global['wR']
    trans = fpdata_global['wT']
    # check rotation matrix
    assert_array_almost_equal(fpdata_local['wR'],
                              np.array([[0, 1, 0], [-1, 0, 0], [0, 0, 1]]))
    assert_array_almost_equal(fpdata_global['wR'],
                              np.array([[0, 1, 0], [-1, 0, 0], [0, 0, 1]]))
    # check global data against rotated local data
    assert_allclose(fpdata_global['F'],
                    np.dot(R, fpdata_local['F'].T).T,
                    atol=0,
                    rtol=1e-5)
    assert_allclose(fpdata_global['M'],
                    np.dot(R, fpdata_local['M'].T).T,
                    atol=0,
                    rtol=1e-5)
    # CoP is more finicky than F and M
    assert_allclose(
        fpdata_global['CoP'][analog_roi, :],
        np.dot(R, fpdata_local['CoP'][analog_roi, :].T).T + trans,
        rtol=1e-5,
        atol=0.001,
    )
    # check some values
    # XXX: these seem to be unstable, should investigate
    # assert_almost_equal(fpdata_local['F'][:, 0].max(), 103.394)
    # assert_almost_equal(fpdata_local['F'][:, 1].max(), 32.8074)
    # assert_almost_equal(fpdata_local['F'][:, 2].min(), -597.624)
    corners = np.array([
        [-232.0, -254.0, 0.0],
        [-232.0, 254.0, 0.0],
        [232.0, 254.0, 0.0],
        [232.0, -254.0, 0.0],
    ])
    assert_almost_equal(fpdata_local['plate_corners'], corners)
Beispiel #8
0
def test_compare_to_c3d():
    """Compare data reads from Nexus and corresponding Nexus written .c3d"""
    start_nexus()
    vicon = nexus.viconnexus()
    # set the correct EMG device name for the old data
    cfg.emg.devname = 'Myon'
    # can only get 3 decimals of agreement between Nexus/c3d model vars (??)
    NDEC = 3
    # vars to test
    modelvars = models.pig_lowerbody.varlabels.keys()
    emg_chs = [
        'LGas',
        'LGlut',
        'LHam',
        'LPer',
        'LRec',
        'LSol',
        'LTibA',
        'LVas',
        'RGas',
        'RGlut',
        'RHam',
        'RPer',
        'RRec',
        'RSol',
        'RTibA',
        'RVas',
    ]
    subj = 'girl6v'
    trialname = '2015_10_22_girl6v_IN03.c3d'
    trialpath = _trial_path(subj, trialname)
    nexus._open_trial(trialpath)
    tr_nexus = Trial(vicon)
    tr_c3d = Trial(trialpath)
    # metadata
    attrs = [
        'analograte',
        'framerate',
        'subject_name',
        'n_forceplates',
        'samplesperframe',
        'length',
        'trialname',
        'ncycles',
    ]
    for attr in attrs:
        assert_equal(getattr(tr_nexus, attr), getattr(tr_c3d, attr))
    # model data
    for var in modelvars:
        # read unnormalized model and compare
        xn, dn = tr_nexus.get_model_data(var)
        assert_array_equal(xn, range(tr_nexus.length))
        xc, dc = tr_c3d.get_model_data(var)
        assert_array_equal(xc, range(tr_nexus.length))
        assert_array_almost_equal(dn, dc, decimal=NDEC)
    # read normalized model and compare
    for j in range(4):
        for var in modelvars:
            xn, dn = tr_nexus.get_model_data(var, j)
            xc, dc = tr_c3d.get_model_data(var, j)
            assert_array_equal(xn, np.arange(101))
            assert_array_equal(xc, np.arange(101))
            assert_array_almost_equal(dn, dc, decimal=NDEC)
    # read unnormalized EMG and compare
    for ch in emg_chs:
        xn, dn = tr_nexus.get_emg_data(ch)
        xc, dc = tr_c3d.get_emg_data(ch)
        assert_array_equal(
            xn, np.arange(tr_nexus.length * tr_nexus.samplesperframe))
        assert_array_equal(xn, xc)
        assert_array_almost_equal(dn, dc, decimal=NDEC)
    # read normalized EMG and compare
    for j in range(4):
        for ch in emg_chs:
            xn, dn = tr_nexus.get_emg_data(ch, j)
            xc, dc = tr_c3d.get_emg_data(ch, j)
            assert_array_equal(xn, xc)
            assert_array_almost_equal(dn, dc, decimal=NDEC)