class GCodeDlg(wx.Frame):
def __init__(self, parent, server, gcode, filenm, pname, settings, images, cbexit):
wx.Frame.__init__(self, None, wx.ID_ANY, self.formatTitle(pname, filenm))
self.SetBackgroundColour("white")
self.Bind(wx.EVT_CLOSE, self.onClose)
self.parent = parent
self.server = server
self.gcode = gcode
self.filenm = filenm
self.pname = pname
self.settings = settings
self.images = images
self.exitDlg = cbexit
self.nExtr = self.parent.nExtr
self.layerCount = 0
if self.gcode:
self.sTotalTime = " / " + formatElapsed(self.gcode.getPrintTime())
self.filament = self.gcode.getFilament()
else:
self.sTotalTime = ""
self.filament = [[0.0, 0.0]]
self.printPosition = 0
self.followPrint = True
self.lx = 0
lbFont = wx.Font(10, wx.FONTFAMILY_SWISS, wx.FONTSTYLE_NORMAL, wx.FONTWEIGHT_BOLD)
self.gcf = GcFrame(self, self.pname, self.gcode, self.settings)
self.stHeight = wx.StaticText(self, wx.ID_ANY, "")
self.stHeight.SetFont(lbFont)
self.stTime = wx.StaticText(self, wx.ID_ANY, "")
self.stTime.SetFont(lbFont)
self.stFilament = wx.StaticText(self, wx.ID_ANY, "")
self.stFilament.SetFont(lbFont)
self.slLayer = wx.Slider(self, wx.ID_ANY, 1, 1, 10, style=wx.SL_VERTICAL+wx.SL_LABELS+wx.SL_INVERSE)
self.Bind(wx.EVT_SLIDER, self.onSlLayer, self.slLayer)
self.bUp = wx.BitmapButton(self, wx.ID_ANY, self.images.pngUp, size=BTNDIM, style=wx.NO_BORDER)
self.bUp.SetBackgroundColour("white")
self.Bind(wx.EVT_BUTTON, self.onBUp, self.bUp)
self.bDown = wx.BitmapButton(self, wx.ID_ANY, self.images.pngDown, size=BTNDIM, style=wx.NO_BORDER)
self.bDown.SetBackgroundColour("white")
self.Bind(wx.EVT_BUTTON, self.onBDown, self.bDown)
self.setSliderRange()
self.cbSync = wx.CheckBox(self, wx.ID_ANY, "Sync with print")
self.cbSync.SetValue(True)
self.Bind(wx.EVT_CHECKBOX, self.onCbSync, self.cbSync)
self.cbPrintedOnly = wx.CheckBox(self, wx.ID_ANY, "Only show printed")
self.cbPrintedOnly.SetValue(self.settings.getSetting("showprintedonly", self.pname, "False"))
self.Bind(wx.EVT_CHECKBOX, self.onCbShowPrintedOnly, self.cbPrintedOnly)
self.cbShowPrev = wx.CheckBox(self, wx.ID_ANY, "Show previous layer")
self.cbShowPrev.SetValue(self.settings.getSetting("showprevious", self.pname, "False"))
self.Bind(wx.EVT_CHECKBOX, self.onCbShowPrev, self.cbShowPrev)
self.cbShowMoves = wx.CheckBox(self, wx.ID_ANY, "Show moves")
self.cbShowMoves.SetValue(self.settings.getSetting("showmoves", self.pname, "False"))
self.Bind(wx.EVT_CHECKBOX, self.onCbShowMoves, self.cbShowMoves)
self.cbShowRetr = wx.CheckBox(self, wx.ID_ANY, "Show retractions")
self.cbShowRetr.SetValue(self.settings.getSetting("showretractions", self.pname, "False"))
self.Bind(wx.EVT_CHECKBOX, self.onCbShowRetr, self.cbShowRetr)
self.cbShowRevRetr = wx.CheckBox(self, wx.ID_ANY, "Show reverse retractions")
self.cbShowRevRetr.SetValue(self.settings.getSetting("showrevretractions", self.pname, "False"))
self.Bind(wx.EVT_CHECKBOX, self.onCbShowRevRetr, self.cbShowRevRetr)
sznavgc = wx.BoxSizer(wx.VERTICAL)
sznavgc.Add(self.bUp, 0, wx.LEFT, 12 if os.name == 'posix' else 25)
sznavgc.Add(self.slLayer, 1, wx.GROW)
sznavgc.Add(self.bDown, 0, wx.LEFT, 12 if os.name == 'posix' else 25)
szgcf = wx.BoxSizer(wx.VERTICAL)
szgcf.Add(self.gcf)
szgcf.AddSpacer(5)
szgcf.Add(self.stHeight, 0, wx.ALIGN_CENTER)
szgcf.AddSpacer(5)
szgcf.Add(self.stTime, 0, wx.ALIGN_CENTER)
szgcf.AddSpacer(5)
szgcf.Add(self.stFilament, 0, wx.ALIGN_CENTER)
szgc = wx.BoxSizer(wx.HORIZONTAL)
szgc.AddSpacer(15)
szgc.Add(szgcf)
if os.name == 'posix':
szgc.AddSpacer(10)
szgc.Add(sznavgc, 1, wx.GROW)
szgc.AddSpacer(15)
szopt1 = wx.BoxSizer(wx.VERTICAL)
szopt1.Add(self.cbSync, 1, wx.EXPAND)
szopt1.Add(self.cbPrintedOnly, 1, wx.EXPAND)
szopt2 = wx.BoxSizer(wx.VERTICAL)
szopt2.Add(self.cbShowPrev, 1, wx.EXPAND)
szopt2.Add(self.cbShowMoves, 1, wx.EXPAND)
szopt3 = wx.BoxSizer(wx.VERTICAL)
szopt3.Add(self.cbShowRetr, 1, wx.EXPAND)
szopt3.Add(self.cbShowRevRetr, 1, wx.EXPAND)
szoptions = wx.BoxSizer(wx.HORIZONTAL)
szoptions.AddSpacer(20)
szoptions.Add(szopt1, 1, wx.EXPAND)
szoptions.AddSpacer(5)
szoptions.Add(szopt2, 1, wx.EXPAND)
szoptions.AddSpacer(5)
szoptions.Add(szopt3, 1, wx.EXPAND)
szoptions.AddSpacer(10)
sz = wx.BoxSizer(wx.VERTICAL)
sz.AddSpacer(10)
sz.Add(szgc)
sz.AddSpacer(5)
sz.Add(szoptions)
sz.AddSpacer(10)
self.showLayerInfo()
self.SetSizer(sz)
self.Fit()
self.Layout()
@staticmethod
def formatTitle(pname, filenm):
if filenm is None:
return "%s - GCode Monitor - (no file loaded)" % pname
else:
return "%s - GCode monitor - %s" % (pname, filenm)
def reloadGCode(self, gcode, filenm):
self.filenm = filenm
self.SetTitle(self.formatTitle(self.pname, filenm))
self.gcode = gcode
if self.gcode:
self.sTotalTime = " / " + formatElapsed(self.gcode.getPrintTime())
self.filament = self.gcode.getFilament()
else:
self.sTotalTime = ""
self.filament = 0.0
self.setSliderRange()
# send new gcode to gcf
self.printPosition = 0
self.gcf.loadGCode(gcode)
self.showLayerInfo()
def setSliderRange(self):
n = self.gcode.layerCount()
self.slLayer.SetRange(1, 10 if n == 0 else n)
self.slLayer.SetValue(1)
self.slLayer.Enable(n != 0)
self.bUp.Enable(n != 0)
self.bDown.Enable(n != 0)
self.layerCount = n
def setPrintPosition(self, pos):
if pos is None:
return False, None, None
self.printPosition = 0 if pos is None else pos
self.gcf.setPrintPosition(self.printPosition)
pLayer, lpct = self.gcode.findLayerByOffset(self.printPosition)
cLayer = self.gcf.getCurrentLayerNum()
if not self.followPrint:
return cLayer != pLayer, pLayer, lpct
if cLayer != pLayer:
self.gcf.setLayer(pLayer)
self.slLayer.SetValue(pLayer+1)
self.showLayerInfo()
return True, pLayer, lpct
return False, pLayer, lpct
def showLayerInfo(self):
l = self.gcf.getCurrentLayer()
if l is None:
lblHt = ""
lblTime = ""
lblFilament = ""
else:
lx = self.gcf.getCurrentLayerNum()
lblHt, lblTime, lblFilament = self.formatLayerInfo(l, lx)
self.stHeight.SetLabel(lblHt)
self.stTime.SetLabel(lblTime)
self.stFilament.SetLabel(lblFilament)
def formatLayerInfo(self, l, lx):
sHt = "Height: {:.2f} Layer: {:d} / {:d}".format(l.getHeight(), lx+1, self.layerCount)
sTm = " Print time: {:s}{:s}".format(formatElapsed(l.getLayerTime()), self.sTotalTime)
o = l.getOffsets()
if self.printPosition < o[0]:
lyrs = self.gcode.getLayersBetweenOffsets(self.printPosition, o[0])
untilTime = 0.0
for ly in lyrs:
untilTime += ly.getLayerTime()
sTm += " ({:s} until)".format(formatElapsed(untilTime))
sFi = " Filament: "
lf = l.getFilament()
for i in range(self.nExtr):
if i > 0:
sFi += " / "
if self.nExtr > 1:
if i > 0:
sFi += " - "
sFi += "{:d}: ".format(i)
sFi += "{:.2f}mm ({:.2f}cm3) / {:.2f}mm".format(lf[i][0], lf[i][1], self.filament[i][0])
return sHt, sTm, sFi
def onSlLayer(self, _):
self.followPrintOff()
v = self.slLayer.GetValue()-1
self.gcf.setLayer(v)
self.showLayerInfo()
def onBUp(self, _):
v = self.slLayer.GetValue()
if v < self.gcode.layerCount():
self.followPrintOff()
v += 1
self.slLayer.SetValue(v)
self.gcf.setLayer(v-1)
self.showLayerInfo()
def onBDown(self, _):
v = self.slLayer.GetValue()
if v > 1:
self.followPrintOff()
v -= 1
self.slLayer.SetValue(v)
self.gcf.setLayer(v-1)
self.showLayerInfo()
def followPrintOff(self):
if self.followPrint:
self.cbSync.SetValue(False)
self.followPrint = False
self.gcf.setFollowPrint(False)
def onCbSync(self, _):
self.followPrint = self.cbSync.GetValue()
self.gcf.setFollowPrint(self.followPrint)
def onCbShowPrintedOnly(self, _):
v = self.cbPrintedOnly.GetValue()
self.settings.setSetting("showprintedonly", str(v), self.pname)
self.gcf.setShowPrintedOnly(v)
def onCbShowPrev(self, _):
v = self.cbShowPrev.GetValue()
self.settings.setSetting("showprevious", str(v), self.pname)
self.gcf.setShowPrevious(v)
def onCbShowMoves(self, _):
v = self.cbShowMoves.GetValue()
self.settings.setSetting("showmoves", str(v), self.pname)
self.gcf.setShowMoves(v)
def onCbShowRetr(self, _):
v = self.cbShowRetr.GetValue()
self.settings.setSetting("showretractions", str(v), self.pname)
self.gcf.setShowRetractions(v)
def onCbShowRevRetr(self, _):
v = self.cbShowRevRetr.GetValue()
self.settings.setSetting("showrevretractions", str(v), self.pname)
self.gcf.setShowRevRetractions(v)
def onClose(self, _):
self.exitDlg()
class GEditDlg(wx.Frame):
def __init__(self, parent):
self.parent = parent
self.history = parent.history
wx.Frame.__init__(self, None, wx.ID_ANY, TITLE_PREFIX, size=(600, 600))
self.Show()
ico = wx.Icon(os.path.join(cmdFolder, "images", "geditico.png"), wx.BITMAP_TYPE_PNG)
self.SetIcon(ico)
self.Bind(wx.EVT_CLOSE, self.onClose)
self.settings = Settings(cmdFolder)
self.propDlg = None
self.legend = None
self.log = self.parent.log
self.images = Images(os.path.join(cmdFolder, "images"))
self.shiftX = 0
self.shiftY = 0
self.modified = False
self.filename = None
self.importFileName = None
self.okToImport = False
self.gObj = self.loadGCode(self.filename)
if self.gObj is not None:
self.updateTitle()
self.gcFrame = GcFrame(self, self.gObj, self.settings)
self.stLayerText = wx.StaticText(self, wx.ID_ANY, "Layer Height: 0.00")
ht = self.gcFrame.GetSize().Get()[1] - 2*BUTTONDIM[1] - 20
if self.gObj is None:
lmax = 1
else:
lmax = self.gObj.layerCount()-1
self.slLayers = wx.Slider(
self, wx.ID_ANY, 0, 0, 1000, size=(-1, ht),
style=wx.SL_VERTICAL | wx.SL_AUTOTICKS | wx.SL_LABELS | wx.SL_INVERSE)
self.Bind(wx.EVT_SCROLL, self.onLayerScroll, self.slLayers)
if self.gObj is None:
self.slLayers.Enable(False)
self.lcGCode = GcodeListCtrl(self, self.gcode, self.images)
self.lcGCode.setLineNumbers(self.settings.uselinenbrs)
self.currentLayer = 0
self.setLayerText()
if self.gObj is not None:
self.lcGCode.setLayerBounds(self.gObj.getGCodeLines(0))
self.bShift = wx.BitmapButton(self, wx.ID_ANY, self.images.pngShift, size=BUTTONDIM)
self.bShift.SetToolTip("Move model in x/y direction")
self.Bind(wx.EVT_BUTTON, self.doShiftModel, self.bShift)
self.bShift.Enable(False)
self.bModTemp = wx.BitmapButton(self, wx.ID_ANY, self.images.pngModtemp, size=BUTTONDIM)
self.bModTemp.SetToolTip("Modify Temperatures")
self.Bind(wx.EVT_BUTTON, self.onModTemps, self.bModTemp)
self.bModTemp.Enable(False)
self.bModSpeed = wx.BitmapButton(self, wx.ID_ANY, self.images.pngModspeed, size=BUTTONDIM)
self.bModSpeed.SetToolTip("Modify Speed")
self.Bind(wx.EVT_BUTTON, self.onModSpeed, self.bModSpeed)
self.bModSpeed.Enable(False)
self.bFilChange = wx.BitmapButton(self, wx.ID_ANY, self.images.pngFilchange, size=BUTTONDIM)
self.bFilChange.SetToolTip("Insert G Code to assist with changing filament")
self.Bind(wx.EVT_BUTTON, self.onFilChange, self.bFilChange)
self.bFilChange.Enable(False)
self.bEdit = wx.BitmapButton(self, wx.ID_ANY, self.images.pngEdit, size=BUTTONDIM)
self.bEdit.SetToolTip("Free edit G Code")
self.Bind(wx.EVT_BUTTON, self.onEditGCode, self.bEdit)
self.bEdit.Enable(False)
self.bUp = wx.BitmapButton(self, wx.ID_ANY, self.images.pngUp, size=BUTTONDIM)
self.bUp.SetToolTip("Move up one layer")
self.Bind(wx.EVT_BUTTON, self.onUp, self.bUp)
self.bUp.Enable(False)
self.bDown = wx.BitmapButton(self, wx.ID_ANY, self.images.pngDown, size=BUTTONDIM)
self.bDown.SetToolTip("Move down one layer")
self.Bind(wx.EVT_BUTTON, self.onDown, self.bDown)
self.bDown.Enable(False)
self.bInfo = wx.BitmapButton(self, wx.ID_ANY, self.images.pngInfo, size=BUTTONDIM)
self.bInfo.SetToolTip("Information")
self.Bind(wx.EVT_BUTTON, self.onInfo, self.bInfo)
self.bInfo.Enable(False)
self.bLegend = wx.BitmapButton(self, wx.ID_ANY, self.images.pngLegend, size=BUTTONDIM)
self.bLegend.SetToolTip("Display a color legend")
self.Bind(wx.EVT_BUTTON, self.onLegend, self.bLegend)
self.bLegend.Enable(True)
self.bSaveLayers = wx.BitmapButton(self, wx.ID_ANY, self.images.pngSavelayers, size=BUTTONDIM)
self.bSaveLayers.SetToolTip("Save specific layers to a file")
self.Bind(wx.EVT_BUTTON, self.onSaveLayers, self.bSaveLayers)
self.bSaveLayers.Enable(False)
self.bOpen = wx.BitmapButton(self, wx.ID_ANY, self.images.pngFileopen, size=BUTTONDIM)
self.bOpen.SetToolTip("Open a G Code file")
self.Bind(wx.EVT_BUTTON, self.onOpen, self.bOpen)
self.bImport = wx.BitmapButton(self, wx.ID_ANY, self.images.pngImport, size=BUTTONDIM)
self.bImport.SetToolTip("Import the current toolbox G Code file")
self.Bind(wx.EVT_BUTTON, self.onImport, self.bImport)
self.bImport.Enable(False)
self.bImportQ = wx.BitmapButton(self, wx.ID_ANY, self.images.pngNext, size=BUTTONDIM)
self.bImportQ.SetToolTip("Import the next G Code file from the queue")
self.Bind(wx.EVT_BUTTON, self.onImportFromQueue, self.bImportQ)
self.bImportQ.Enable(False)
self.bExport = wx.BitmapButton(self, wx.ID_ANY, self.images.pngExport, size=BUTTONDIM)
self.bExport.SetToolTip("Export the current toolbox G Code file")
self.Bind(wx.EVT_CHECKBOX, self.onExport, self.bExport)
self.bExport.Enable(not self.settings.autoexport)
self.cbExport = wx.CheckBox(self, wx.ID_ANY, "Auto-export")
self.cbExport.SetToolTip("Auto-export the current G Code file when saving")
self.Bind(wx.EVT_CHECKBOX, self.onCbExport, self.cbExport)
self.cbEnqueue = wx.CheckBox(self, wx.ID_ANY, "Add to queue")
self.cbEnqueue.SetToolTip("Enqueue the current G Code file on the end of the G Code queue when exporting")
self.Bind(wx.EVT_BUTTON, self.onEnqueue, self.cbEnqueue)
self.bSave = wx.BitmapButton(self, wx.ID_ANY, self.images.pngFilesave, size=BUTTONDIM)
self.bSave.SetToolTip("Save G Code to the current file")
self.Bind(wx.EVT_BUTTON, self.onSave, self.bSave)
self.bSave.Enable(False)
self.bSaveAs = wx.BitmapButton(self, wx.ID_ANY, self.images.pngFilesaveas, size=BUTTONDIM)
self.bSaveAs.SetToolTip("Save G Code to a different file")
self.Bind(wx.EVT_BUTTON, self.onSaveAs, self.bSaveAs)
self.bSaveAs.Enable(False)
self.cbShowMoves = wx.CheckBox(self, wx.ID_ANY, "Show Moves")
self.cbShowMoves.SetToolTip("Show/Hide non-extrusion moves")
self.cbShowMoves.SetValue(self.settings.showmoves)
self.Bind(wx.EVT_CHECKBOX, self.onCbShowMoves, self.cbShowMoves)
self.cbShowPrevious = wx.CheckBox(self, wx.ID_ANY, "Show Previous Layer")
self.cbShowPrevious.SetToolTip("Show/Hide the previous layer")
self.cbShowPrevious.SetValue(self.settings.showprevious)
self.Bind(wx.EVT_CHECKBOX, self.onCbShowPrevious, self.cbShowPrevious)
self.cbShowRetractions = wx.CheckBox(self, wx.ID_ANY, "Show Retractions")
self.cbShowRetractions.SetToolTip("Show/Hide retractions")
self.cbShowRetractions.SetValue(self.settings.showretractions)
self.Bind(wx.EVT_CHECKBOX, self.onCbShowRetractions, self.cbShowRetractions)
self.cbShowRevRetractions = wx.CheckBox(self, wx.ID_ANY, "Show Reverse Retractions")
self.cbShowRevRetractions.SetToolTip("Show/Hide reverse retractions")
self.cbShowRevRetractions.SetValue(self.settings.showrevretractions)
self.Bind(wx.EVT_CHECKBOX, self.onCbShowRevRetractions, self.cbShowRevRetractions)
self.cmbTool = wx.ComboBox(self, wx.ID_ANY, "None", choices = ["None", "0", "1", "2", "3"],
style = wx.CB_DROPDOWN + wx.CB_READONLY)
self.cmbTool.SetToolTip("Choose which tool, if any, is highlighted in the display")
self.Bind(wx.EVT_COMBOBOX, self.onCmbTool, self.cmbTool)
self.cbLineNbrs = wx.CheckBox(self, wx.ID_ANY, "Line Numbers")
self.cbLineNbrs.SetToolTip("Use G Code line numbers")
self.cbLineNbrs.SetValue(self.settings.uselinenbrs)
self.Bind(wx.EVT_CHECKBOX, self.onCbLineNbrs, self.cbLineNbrs)
self.bBracketStart = wx.BitmapButton(self, wx.ID_ANY, self.images.pngBracketopen, size=BUTTONDIM)
self.bBracketStart.SetToolTip("Mark the beginning of a block of G code")
self.Bind(wx.EVT_BUTTON, self.onBracketStart, self.bBracketStart)
self.bBracketStart.Enable(False)
self.bBracketEnd = wx.BitmapButton(self, wx.ID_ANY, self.images.pngBracketclose, size=BUTTONDIM)
self.bBracketEnd.SetToolTip("Mark the end of a block of G code")
self.Bind(wx.EVT_BUTTON, self.onBracketEnd, self.bBracketEnd)
self.bBracketEnd.Enable(False)
self.bBracketDel = wx.BitmapButton(self, wx.ID_ANY, self.images.pngBracketdel, size=BUTTONDIM)
self.bBracketDel.SetToolTip("Delete the marked block of G code")
self.Bind(wx.EVT_BUTTON, self.onBracketDel, self.bBracketDel)
self.bBracketDel.Enable(False)
btnszr = wx.BoxSizer(wx.HORIZONTAL)
btnszr.AddSpacer(20)
btnszr.Add(self.bShift)
btnszr.AddSpacer(10)
btnszr.Add(self.bModTemp)
btnszr.AddSpacer(10)
btnszr.Add(self.bModSpeed)
btnszr.AddSpacer(10)
btnszr.Add(self.bFilChange)
btnszr.AddSpacer(10)
btnszr.Add(self.bEdit)
btnszr.AddSpacer(10)
btnszr.Add(self.bInfo)
btnszr.AddSpacer(10)
btnszr.Add(self.bLegend)
btnszr.AddSpacer(50)
btnszr.Add(self.bSaveLayers)
btnszr.AddSpacer(10)
btnszr.Add(self.bOpen)
btnszr.AddSpacer(10)
btnszr.Add(self.bImport)
btnszr.AddSpacer(10)
btnszr.Add(self.bImportQ)
btnszr.AddSpacer(10)
btnszr.Add(self.bExport)
btnszr.AddSpacer(5)
optszr = wx.BoxSizer(wx.VERTICAL)
optszr.AddSpacer(1)
optszr.Add(self.cbExport)
optszr.AddSpacer(1)
optszr.Add(self.cbEnqueue)
btnszr.Add(optszr)
btnszr.AddSpacer(10)
btnszr.Add(self.bSave)
btnszr.AddSpacer(10)
btnszr.Add(self.bSaveAs)
btnszr.AddSpacer(10)
hszr = wx.BoxSizer(wx.HORIZONTAL)
hszr.AddSpacer(20)
vszr = wx.BoxSizer(wx.VERTICAL)
vszr.Add(self.gcFrame)
vszr.Add(self.stLayerText, 1, wx.ALIGN_CENTER_HORIZONTAL, 1)
vszr.AddSpacer(10)
opthszr = wx.BoxSizer(wx.HORIZONTAL)
optszr = wx.BoxSizer(wx.VERTICAL)
optszr.AddSpacer(1)
optszr.Add(self.cbShowMoves)
optszr.AddSpacer(1)
optszr.Add(self.cbShowPrevious)
opthszr.Add(optszr)
opthszr.AddSpacer(10)
optszr = wx.BoxSizer(wx.VERTICAL)
optszr.AddSpacer(1)
optszr.Add(self.cbShowRetractions)
optszr.AddSpacer(1)
optszr.Add(self.cbShowRevRetractions)
opthszr.Add(optszr)
opthszr.AddSpacer(10)
optszr = wx.BoxSizer(wx.VERTICAL)
optszr.AddSpacer(1)
hsz = wx.BoxSizer(wx.HORIZONTAL)
hsz.Add(wx.StaticText(self, wx.ID_ANY, "Tool to Hi-light: "), 1, wx.TOP, 5)
hsz.AddSpacer(5)
hsz.Add(self.cmbTool)
optszr.Add(hsz)
opthszr.Add(optszr)
vszr.Add(opthszr)
hszr.Add(vszr)
szNav = wx.BoxSizer(wx.VERTICAL)
szNav.Add(self.bUp, 1, wx.ALIGN_CENTER_HORIZONTAL, 1)
szNav.AddSpacer(10)
szNav.Add(self.slLayers)
szNav.AddSpacer(10)
szNav.Add(self.bDown, 1, wx.ALIGN_CENTER_HORIZONTAL, 1)
hszr.Add(szNav)
hszr.AddSpacer(20)
listszr = wx.BoxSizer(wx.VERTICAL)
listszr.Add(self.lcGCode)
listszr.AddSpacer(10)
listszr.Add(self.cbLineNbrs, 1, wx.ALIGN_CENTER_HORIZONTAL, 1)
brksz = wx.BoxSizer(wx.HORIZONTAL)
brksz.Add(self.bBracketStart)
brksz.AddSpacer(20)
brksz.Add(self.bBracketDel)
brksz.AddSpacer(20)
brksz.Add(self.bBracketEnd)
listszr.AddSpacer(10)
listszr.Add(brksz, 0, wx.ALIGN_CENTER_HORIZONTAL, 1)
hszr.Add(listszr)
hszr.AddSpacer(20)
vszr = wx.BoxSizer(wx.VERTICAL)
vszr.AddSpacer(20)
vszr.Add(btnszr)
vszr.AddSpacer(10)
vszr.Add(hszr)
vszr.AddSpacer(20)
self.SetSizer(vszr)
self.Layout()
self.Fit()
self.slLayers.SetRange(0, lmax)
self.slLayers.SetPageSize(int(lmax/10))
if self.gObj is not None:
self.enableButtons()
def onLegend(self, evt):
if self.legend is None:
self.legend = LegendDlg(self)
self.legend.Show()
else:
self.legend.Show()
self.legend.Raise()
def legendClosed(self):
self.legend = None
def setImportFile(self, fn):
self.importFileName = fn
if fn is None:
self.bImport.SetToolTip("")
self.bImport.Enable(False)
else:
self.bImport.SetToolTip("Import G Code file (%s)" % fn)
self.bImport.Enable(True)
def onBracketStart(self, evt):
b = self.lcGCode.setBracketStart()
self.gcFrame.setBracket(b)
self.enableBracketDel(b)
def onBracketEnd(self, evt):
b = self.lcGCode.setBracketEnd()
self.gcFrame.setBracket(b)
self.enableBracketDel(b)
def enableBracketDel(self, b=None):
if b is None:
b = self.lcGCode.getBracket()
if b[0] is None or b[1] is None:
self.bBracketDel.Enable(False)
else:
self.bBracketDel.Enable(True)
def onBracketDel(self, evt):
b = self.lcGCode.getBracket()
if b[0] is None or b[1] is None:
return
self.gcode = self.gcode[:b[0]] + self.gcode[b[1]+1:]
self.setModified(True)
self.gObj = self.buildModel()
self.modGcSuffixTemps(self.gObj.getTemps())
l = self.gcFrame.getCurrentLayer()
self.gcFrame.loadModel(self.gObj, l, self.gcFrame.getZoom())
lmax = self.gObj.layerCount()-1
self.slLayers.SetRange(0, lmax)
self.slLayers.SetPageSize(int(lmax/10))
self.lcGCode.setGCode(self.gcode)
self.lcGCode.setLayerBounds(self.gObj.getGCodeLines(l))
self.bBracketDel.Enable(False)
self.updateInfoDlg(self.currentLayer)
def updateTitle(self):
if self.filename is None:
self.SetTitle("%s" % TITLE_PREFIX)
else:
txt = TITLE_PREFIX + " - "
if self.modified:
txt += "* "
txt += self.filename
self.SetTitle(txt)
def setModified(self, flag=True):
self.modified = flag
self.updateTitle()
def onExport(self, evt):
if self.modified:
dlg = wx.MessageDialog(self,
"You have unsaved changes.\nAre you sure you want to export?",
"Confirm Export With Pending Changes",
wx.YES_NO | wx.NO_DEFAULT | wx.ICON_QUESTION)
rc = dlg.ShowModal()
dlg.Destroy()
if rc != wx.ID_YES:
return
self.parent.exportGcFile(self.filename, True, self.settings.autoenqueue)
def onCbExport(self, evt):
self.settings.autoexport = evt.IsChecked()
self.bExport.Enable(not self.settings.autoexport)
def onEnqueue(self, evt):
self.settings.autoenqueue = evt.IsChecked()
def onImport(self, evt):
fn = self.parent.importGcFile()
if fn is None:
return
self.loadGFile(fn)
def onImportFromQueue(self, evt):
fn = self.parent.importGcFromQueue()
if fn is None:
return
self.loadGFile(fn)
def setImportButton(self, msg):
if msg is None:
self.okToImport = False
self.bImportQ.SetToolTip("")
self.bImportQ.Enable(False)
else:
self.okToImport = True
self.bImportQ.SetToolTip(msg)
self.bImportQ.Enable(self.bOpen.IsEnabled())
def onOpen(self, evt):
if self.modified:
dlg = wx.MessageDialog(self,
"You have unsaved changes.\nAre you sure you want to open a different file?",
"Confirm Open With Pending Changes",
wx.YES_NO | wx.NO_DEFAULT | wx.ICON_QUESTION)
rc = dlg.ShowModal()
dlg.Destroy()
if rc != wx.ID_YES:
return
self.gcodeFileDialog()
def onInfo(self, evt):
if self.propDlg is not None:
return
self.propDlg = PropertiesDlg(self, self, None, cb=self.onInfoClose)
self.showFileProperties()
self.showLayerProperties(self.currentLayer)
self.propDlg.Show()
def onInfoClose(self):
self.propDlg = None
def updateInfoDlg(self, lx):
if self.propDlg is None:
return
self.showFileProperties()
self.showLayerProperties(lx)
def showFileProperties(self):
slCfg, filSiz, tempsHE, tempsBed = parseGCSuffix(self.gcode)
ftime = time.strftime('%y/%m/%d-%H:%M:%S', time.localtime(os.path.getmtime(self.filename)))
if len(self.filename) > 50:
self.propDlg.setProperty(PropertyEnum.fileName, os.path.basename(self.filename))
else:
self.propDlg.setProperty(PropertyEnum.fileName, self.filename)
self.propDlg.setProperty(PropertyEnum.slicerCfg, slCfg)
self.propDlg.setProperty(PropertyEnum.filamentSize, filSiz)
self.propDlg.setProperty(PropertyEnum.temperatures, "HE:%s BED:%s" % (tempsHE, tempsBed))
self.propDlg.setProperty(PropertyEnum.sliceTime, ftime)
self.propDlg.setProperty(PropertyEnum.printEstimate, self.totalTimeStr)
def showLayerProperties(self, lx):
if self.propDlg is None:
return
self.propDlg.setProperty(PropertyEnum.layerNum, "%d" % lx)
x0, y0, xn, yn = self.gObj.getLayerMinMaxXY(lx)
if x0 is None:
self.propDlg.setProperty(PropertyEnum.minMaxXY, "")
else:
self.propDlg.setProperty(PropertyEnum.minMaxXY, "(%.2f, %.2f) - (%.2f, %.2f)" % (x0, y0, xn, yn))
le, prior, after = self.gObj.getLayerFilament(lx)
eUsed = self.gObj.getFilament()
s = []
for i in range(self.settings.nextruders):
s.append("%.2f/%.2f <: %.2f >: %.2f" % (le[i], eUsed[i], prior[i], after[i]))
self.propDlg.setProperty(PropertyEnum.filamentUsed, s)
f, l = self.gObj.getGCodeLines(lx)
if f is None:
self.propDlg.setProperty(PropertyEnum.gCodeRange, "")
else:
self.propDlg.setProperty(PropertyEnum.gCodeRange, "%d - %d" % (f, l))
self.propDlg.setProperty(PropertyEnum.layerPrintTime, self.layerTimeStr[lx])
if lx == 0:
self.propDlg.setProperty(PropertyEnum.timeUntil, "")
else:
t = sum(self.layerTimes[:lx])
self.propDlg.setProperty(PropertyEnum.timeUntil, formatElapsed(t))
def gcodeFileDialog(self):
wildcard = "GCode (*.gcode)|*.gcode;*.GCODE|" \
"All files (*.*)|*.*"
dlg = wx.FileDialog(
self, message="Choose a GCode file",
defaultDir=self.settings.lastdirectory,
defaultFile="",
wildcard=wildcard,
style=wx.FD_OPEN)
rc = dlg.ShowModal()
if rc == wx.ID_OK:
path = dlg.GetPath().encode('ascii','ignore')
dlg.Destroy()
if rc != wx.ID_OK:
return
self.loadGFile(path)
def loadGFile(self, path):
self.settings.lastdirectory = os.path.dirname(path)
self.gObj = self.loadGCode(path)
if self.gObj is None:
lmax = 1
self.slLayers.Enable(False)
self.bUp.Enable(False)
self.bDown.Enable(False)
self.filename = None
else:
lmax = self.gObj.layerCount()-1
self.slLayers.Enable(True)
self.bUp.Enable(True)
self.bDown.Enable(True)
self.filename = path
self.updateTitle()
self.slLayers.SetRange(0, lmax)
self.slLayers.SetPageSize(int(lmax/10))
self.gcFrame.loadModel(self.gObj)
self.lcGCode.setGCode(self.gcode)
self.currentLayer = 0
self.setLayerText()
self.slLayers.SetValue(0)
self.updateInfoDlg(0)
self.setModified(False)
if self.gObj is not None:
self.lcGCode.setLayerBounds(self.gObj.getGCodeLines(0))
self.enableButtons()
else:
self.enableButtons(False)
def enableButtons(self, flag=True, openButtons=False):
self.bShift.Enable(flag)
self.bModTemp.Enable(flag)
self.bModSpeed.Enable(flag)
self.bEdit.Enable(flag)
self.bInfo.Enable(flag)
self.bUp.Enable(flag)
self.bDown.Enable(flag)
self.bSaveLayers.Enable(flag)
self.bSave.Enable(flag)
self.bSaveAs.Enable(flag)
self.bExport.Enable(flag and (not self.settings.autoexport))
self.bFilChange.Enable(flag)
self.bBracketStart.Enable(flag)
self.bBracketEnd.Enable(flag)
self.enableBracketDel()
if openButtons:
if flag and self.importFileName is not None:
self.bImport.Enable(True)
else:
self.bImport.Enable(False)
if flag and self.okToImport:
self.bImportQ.Enable(True)
else:
self.bImportQ.Enable(False)
self.bOpen.Enable(flag)
def doShiftModel(self, evt):
dlg = ShiftModelDlg(self, self.gObj, self.settings.buildarea)
dlg.CenterOnScreen()
rc = dlg.ShowModal()
dlg.Destroy()
if rc == wx.ID_OK:
self.applyShift()
self.setModified()
else:
self.setShift(0, 0)
def setShift(self, sx, sy):
self.shiftX = sx
self.shiftY = sy
self.gcFrame.setShift(sx, sy)
def applyShift(self):
self.gcode = [self.applyAxisShift(self.applyAxisShift(l, 'y', self.shiftY), 'x', self.shiftX) for l in self.gcode]
self.shiftX = 0
self.shiftY = 0
self.gObj = self.buildModel()
self.gcFrame.loadModel(self.gObj, self.gcFrame.getCurrentLayer(), self.gcFrame.getZoom())
self.lcGCode.setGCode(self.gcode)
self.lcGCode.refreshList()
self.updateInfoDlg(self.currentLayer)
def applyAxisShift(self, s, axis, shift):
if "m117" in s or "M117" in s:
return s
if axis == 'x':
m = reX.match(s)
maxv = self.settings.buildarea[0]
elif axis == 'y':
m = reY.match(s)
maxv = self.settings.buildarea[1]
elif axis == 'z':
m = reZ.match(s)
maxv = self.settings.buildarea[1]
else:
return s
if m is None or m.lastindex != 3:
return s
value = float(m.group(2)) + float(shift)
if value < 0:
value = 0.0
elif value > maxv:
value = float(maxv)
return "%s%s%s" % (m.group(1), str(value), m.group(3))
def onModTemps(self, evt):
dlg = ModifyTempsDlg(self, self.gObj, self.settings.platemps, self.settings.abstemps)
dlg.CenterOnScreen()
rc = dlg.ShowModal()
if rc == wx.ID_OK:
bed, hes = dlg.getResult()
dlg.Destroy()
if rc != wx.ID_OK:
return
self.applyTempChange(bed, hes)
def applyTempChange(self, bed, hes):
self.currentTool = 0
self.gcode = [self.applySingleTempChange(l, bed, hes) for l in self.gcode]
self.setModified(True)
self.gObj = self.buildModel()
self.modGcSuffixTemps(self.gObj.getTemps())
self.gcFrame.loadModel(self.gObj, self.gcFrame.getCurrentLayer(), self.gcFrame.getZoom())
self.lcGCode.setGCode(self.gcode)
self.lcGCode.refreshList()
self.updateInfoDlg(self.currentLayer)
def modGcSuffixTemps(self, nTemps):
bstr = "%.1f" % nTemps[0]
h = []
nct = 0
for x in nTemps[1]:
if x is None:
nct += 1
else:
if nct != 0:
h.extend([None]*nct)
nct = 0
h.append("%.1f" % x)
hestr = ",".join(h)
modifyGCSuffix(self.gcode, None, None, hestr, bstr)
def applySingleTempChange(self, s, bed, hes):
if "m104" in s.lower() or "m109" in s.lower():
m = reS.match(s)
difference = hes[self.currentTool]
elif "m140" in s.lower() or "m190" in s.lower():
m = reS.match(s)
difference = bed
elif s.startswith("T"):
try:
t = int(s[1:])
except:
t = None
if t is not None:
self.currentTool = t
return s
else:
return s
if m is None or m.lastindex != 3:
return s
value = float(m.group(2))
if value == 0.0:
return s
value += float(difference)
return "%s%s%s" % (m.group(1), str(value), m.group(3))
def onModSpeed(self, evt):
dlg = ModifySpeedDlg(self)
dlg.CenterOnScreen()
val = dlg.ShowModal()
if val == wx.ID_OK:
modSpeeds = dlg.getResult()
dlg.Destroy()
if val != wx.ID_OK:
return
self.applySpeedChange([float(x)/100.0 for x in modSpeeds])
def applySpeedChange(self, speeds):
self.gcode = [self.applySingleSpeedChange(l, speeds) for l in self.gcode]
self.setModified(True)
self.gObj = self.buildModel()
self.gcFrame.loadModel(self.gObj, self.gcFrame.getCurrentLayer(), self.gcFrame.getZoom())
self.lcGCode.setGCode(self.gcode)
self.lcGCode.refreshList()
self.updateInfoDlg(self.currentLayer)
def applySingleSpeedChange(self, s, speeds):
if "m117" in s or "M117" in s:
return s
m = reF.match(s)
if m is None or m.lastindex != 3:
return s
e = reE.match(s)
if e is None: #no extrusion - must be a move
factor = speeds[1]
else:
factor = speeds[0]
value = float(m.group(2)) * float(factor)
return "%s%s%s" % (m.group(1), str(value), m.group(3))
def onFilChange(self, evt):
insertPoint = self.lcGCode.getSelectedLine()
dlg = FilamentChangeDlg(self, self.gcode, self.gObj,
insertPoint,
self.gObj[self.currentLayer].printHeight())
rc = dlg.ShowModal()
if rc == wx.ID_OK:
ngc = dlg.getValues()
dlg.Destroy()
if rc != wx.ID_OK:
return
if insertPoint == 0:
self.gcode = ngc + self.gcode
else:
self.gcode = self.gcode[:insertPoint] + ngc + self.gcode[insertPoint:]
self.setModified(True)
self.enableButtons()
self.gObj = self.buildModel()
lmax = self.gObj.layerCount()-1
self.slLayers.SetRange(0, lmax)
self.slLayers.SetPageSize(int(lmax/10))
self.gcFrame.loadModel(self.gObj, self.currentLayer, None)
self.lcGCode.setGCode(self.gcode)
self.lcGCode.setLayerBounds(self.gObj.getGCodeLines(self.currentLayer))
self.updateInfoDlg(self.currentLayer)
def onEditGCode(self, evt):
self.editDlg = EditGCodeDlg(self, self.gcode, "<live buffer>", self.editClosed)
self.editDlg.CenterOnScreen()
self.editDlg.Show()
self.enableButtons(flag=False, openButtons=True)
def editClosed(self, rc):
self.enableButtons(flag=True, openButtons=True)
if rc == wx.ID_OK:
data = self.editDlg.getData()
self.editDlg.Destroy()
if rc != wx.ID_OK:
return
self.gcode = data[:]
self.setModified(True)
self.gObj = self.buildModel()
self.modGcSuffixTemps(self.gObj.getTemps())
self.gcFrame.loadModel(self.gObj, 0, 1)
self.currentLayer = 0
self.setLayerText()
self.slLayers.SetValue(0)
lmax = self.gObj.layerCount()-1
self.slLayers.SetRange(0, lmax)
self.slLayers.SetPageSize(int(lmax/10))
self.lcGCode.setGCode(self.gcode)
self.lcGCode.setLayerBounds(self.gObj.getGCodeLines(0))
self.lcGCode.refreshList()
self.updateInfoDlg(0)
def onCbShowMoves(self, evt):
self.settings.showmoves = self.cbShowMoves.GetValue()
self.gcFrame.setShowMoves(self.settings.showmoves)
def onCbShowPrevious(self, evt):
self.settings.showprevious = self.cbShowPrevious.GetValue()
self.gcFrame.setShowPrevious(self.settings.showprevious)
def onCbShowRetractions(self, evt):
self.settings.showretractions = self.cbShowRetractions.GetValue()
self.gcFrame.setShowRetractions(self.settings.showretractions)
def onCbShowRevRetractions(self, evt):
self.settings.showrevretractions = self.cbShowRevRetractions.GetValue()
self.gcFrame.setShowRevRetractions(self.settings.showrevretractions)
def onCmbTool(self, evt):
sel = self.cmbTool.GetStringSelection()
if sel == "" or sel == "None":
sel = None
else:
try:
sel = int(sel)
except:
sel = None
self.gcFrame.setHilightTool(sel)
def onCbLineNbrs(self, evt):
self.settings.uselinenbrs = self.cbLineNbrs.GetValue()
self.lcGCode.setLineNumbers(self.settings.uselinenbrs)
def onLayerScroll(self, evt):
v = self.slLayers.GetValue()
if v == self.currentLayer:
return
self.changeLayer(v)
def onUp(self, evt):
lmax = self.slLayers.GetRange()[1]
if self.currentLayer >= lmax:
return
v = self.currentLayer + 1
self.changeLayer(v)
def onDown(self, evt):
if self.currentLayer <= 0:
return
v = self.currentLayer - 1
self.changeLayer(v)
def changeLayer(self, v):
self.currentLayer = v
self.gcFrame.setLayer(v)
self.slLayers.SetValue(v)
self.setLayerText()
self.lcGCode.setLayerBounds(self.gObj.getGCodeLines(v))
self.showLayerProperties(v)
def setLayerText(self):
if self.gObj is None:
ht = 0.0
else:
ht = self.gObj[self.currentLayer].printHeight()
self.stLayerText.SetLabel("Layer Height: %0.3f" % ht)
def reportSelectedLine(self, ln):
self.gcFrame.reportSelectedLine(ln)
def onClose(self, evt):
self.settings.save()
if self.modified:
dlg = wx.MessageDialog(self,
"You have unsaved changes.\nAre you sure you want to exit?",
"Confirm Exit With Pending Changes",
wx.YES_NO | wx.NO_DEFAULT | wx.ICON_QUESTION)
rc = dlg.ShowModal()
dlg.Destroy()
if rc == wx.ID_YES:
self.parent.GEditClosed()
else:
self.parent.GEditClosed()
def loadGCode(self, fn):
if fn is None:
self.gcode = []
return None
try:
self.gcode = list(open(fn))
except:
print "Error opening file %s" % fn
return None
return self.buildModel()
def buildModel(self):
rgcode = [s.rstrip() for s in self.gcode]
cnc = CNC(self.settings.acceleration, self.settings.layerheight)
ln = -1
for gl in rgcode:
ln += 1
if ";" in gl:
gl = gl.split(";")[0]
if gl.strip() == "":
continue
p = re.split("\\s+", gl, 1)
params = {}
if not (p[0].strip() in ["M117", "m117"]):
if len(p) >= 2:
self.paramStr = p[1]
if "X" in self.paramStr:
params["X"] = self._get_float("X")
if "Y" in self.paramStr:
params["Y"] = self._get_float("Y")
if "Z" in self.paramStr:
params["Z"] = self._get_float("Z")
if "E" in self.paramStr:
params["E"] = self._get_float("E")
if "F" in self.paramStr:
params["F"] = self._get_float("F")
if "S" in self.paramStr:
params["S"] = self._get_float("S")
cnc.execute(p[0], params, ln)
gobj = cnc.getGObject()
gobj.setMaxLine(ln)
self.totalTime, self.layerTimes = cnc.getTimes()
self.totalTimeStr = formatElapsed(self.totalTime)
self.layerTimeStr = [formatElapsed(s) for s in self.layerTimes]
return gobj
def _get_float(self,which):
try:
return float(gcRegex.findall(self.paramStr.split(which)[1])[0])
except:
print "exception: ", self.paramStr
def onSaveAs(self, evt):
wildcard = "GCode (*.gcode)|*.gcode;*.GCODE"
dlg = wx.FileDialog(
self, message="Save as ...", defaultDir=self.settings.lastdirectory,
defaultFile="", wildcard=wildcard, style=wx.FD_SAVE|wx.FD_OVERWRITE_PROMPT)
val = dlg.ShowModal()
if val != wx.ID_OK:
dlg.Destroy()
return
path = dlg.GetPath()
dlg.Destroy()
ext = os.path.splitext(os.path.basename(path))[1]
if ext == "":
path += ".gcode"
self.saveFile(path)
def onSave(self, evt):
if self.filename is None:
self.onSaveAs(evt)
else:
self.saveFile(self.filename)
def saveFile(self, path):
fp = file(path, 'w')
for ln in self.gcode:
fp.write("%s\n" % ln.rstrip())
self.setModified(False)
fp.close()
self.filename = path
self.parent.exportGcFile(path, self.settings.autoexport, self.settings.autoenqueue)
self.updateTitle()
dlg = wx.MessageDialog(self, "G Code file\n" + path + "\nwritten.",
'Save Successful', wx.OK | wx.ICON_INFORMATION)
dlg.ShowModal()
dlg.Destroy()
def onSaveLayers(self, evt):
dlg = SaveLayerDlg(self, self.gObj)
rc = dlg.ShowModal()
if rc == wx.ID_OK:
sx, ex, ereset, zmodify, zdelta = dlg.getValues()
dlg.Destroy()
if rc != wx.ID_OK:
return
startLine = self.gObj.getGCodeLines(sx)[0]
endLine = self.gObj.getGCodeLines(ex)[1]
wildcard = "GCode (*.gcode)|*.gcode;*.GCODE"
dlg = wx.FileDialog(
self, message="Save as ...", defaultDir=self.settings.lastdirectory,
defaultFile="", wildcard=wildcard, style=wx.FD_SAVE|wx.FD_OVERWRITE_PROMPT)
val = dlg.ShowModal()
if val != wx.ID_OK:
dlg.Destroy()
return
path = dlg.GetPath()
dlg.Destroy()
ext = os.path.splitext(os.path.basename(path))[1]
if ext == "":
path += ".gcode"
fp = file(path, 'w')
if ereset:
fp.write("G92 E%0.5f\n" % self.gObj[sx].startingE())
if zmodify:
fp.write("\n".join([self.applyAxisShift(ln, 'z', zdelta).rstrip() for ln in self.gcode[startLine:endLine+1]]))
else:
fp.write("\n".join([ln.rstrip() for ln in self.gcode[startLine:endLine+1]]))
fp.close()
dlg = wx.MessageDialog(self, "G Code file\n" + path + "\nwritten.",
'Save Layers Successful', wx.OK | wx.ICON_INFORMATION)
dlg.ShowModal()
dlg.Destroy()
def applyZMod(self, ln, modflag):
if not modflag:
return ln
return ln
class PrintMonitorDlg(wx.Frame):
def __init__(self, parent, wparent, reprap, prtName):
self.parent = parent
self.wparent = wparent
self.log = self.parent.log
self.history = wparent.history
self.reprap = reprap
self.settings = self.parent.settings
self.images = self.parent.images
self.state = PrintState.idle
self.oldState = None
self.gcodeLoaded = False
self.gcodeFile = None
self.printerName = prtName
self.layerMap = []
self.okToImport = False
self.importFile = None
self.currentLayer = 0
self.maxTool = 0
self.eUsed = [0.0, 0.0, 0.0, 0.0]
self.totalTime = 0
self.totalTimeStr = ""
self.layerTimes = []
self.layerTimeStr = []
self.layerRange = (0, 0)
self.gObj = None
self.printLayer = 0
self.printPosition = None
title = self.buildTitle()
wx.Frame.__init__(self, wparent, wx.ID_ANY, title=title)
self.Show()
ico = wx.Icon(os.path.join(cmdFolder, "images", "printmon.png"),
wx.BITMAP_TYPE_PNG)
self.SetIcon(ico)
if self.settings.hassdcard:
self.sdcard = SDCard(self.parent, self, self.reprap, self.log)
else:
self.sdcard = None
self.gcf = GcFrame(self, self.gObj, self.settings)
self.stLayerText = wx.StaticText(self, wx.ID_ANY,
"Layer Height: 0.00")
ht = self.gcf.GetSize().Get()[1] - BUTTONDIM[1] * 2 - 20
self.slLayers = wx.Slider(self,
wx.ID_ANY,
0,
0,
1000,
size=(-1, ht),
style=wx.SL_VERTICAL | wx.SL_AUTOTICKS
| wx.SL_LABELS | wx.SL_INVERSE)
self.Bind(wx.EVT_SCROLL, self.onLayerScroll, self.slLayers)
self.slLayers.Enable(False)
self.cbShowMoves = wx.CheckBox(self, wx.ID_ANY, "Show moves")
self.cbShowMoves.SetValue(self.settings.showmoves)
self.Bind(wx.EVT_CHECKBOX, self.onShowMoves, self.cbShowMoves)
self.cbShowPrevious = wx.CheckBox(self, wx.ID_ANY,
"Show previous layer")
self.cbShowPrevious.SetValue(self.settings.showprevious)
self.Bind(wx.EVT_CHECKBOX, self.onShowPrevious, self.cbShowPrevious)
self.cbToolPathOnly = wx.CheckBox(self, wx.ID_ANY,
"Show tool paths only")
self.cbToolPathOnly.SetValue(self.settings.toolpathonly)
self.Bind(wx.EVT_CHECKBOX, self.onToolPathOnly, self.cbToolPathOnly)
self.cbSyncPrint = wx.CheckBox(self, wx.ID_ANY, "Sync with print")
self.cbSyncPrint.SetValue(True)
self.Bind(wx.EVT_CHECKBOX, self.onSyncPrint, self.cbSyncPrint)
self.bImport = wx.BitmapButton(self,
wx.ID_ANY,
self.images.pngImport,
size=BUTTONDIM)
self.bImport.SetToolTip("Import G Code file from toolbox")
self.Bind(wx.EVT_BUTTON, self.onImport, self.bImport)
self.bImportQ = wx.BitmapButton(self,
wx.ID_ANY,
self.images.pngNext,
size=BUTTONDIM)
self.Bind(wx.EVT_BUTTON, self.onImportFromQueue, self.bImportQ)
self.bOpen = wx.BitmapButton(self,
wx.ID_ANY,
self.images.pngFileopen,
size=BUTTONDIM)
self.bOpen.SetToolTip("Open a G Code file")
self.Bind(wx.EVT_BUTTON, self.onOpenFile, self.bOpen)
self.Bind(wx.EVT_CLOSE, self.onClose)
self.bPrint = PrintButton(self, self.images)
self.bPrint.Enable(False)
self.Bind(wx.EVT_BUTTON, self.onPrint, self.bPrint)
self.bPause = PauseButton(self, self.images)
self.bPause.Enable(False)
self.Bind(wx.EVT_BUTTON, self.onPause, self.bPause)
self.bSdPrintTo = wx.BitmapButton(self,
wx.ID_ANY,
self.images.pngSdprintto,
size=(BUTTONDIMWIDE))
self.bSdPrintTo.Enable(False)
self.Bind(wx.EVT_BUTTON, self.onSdPrintTo, self.bSdPrintTo)
self.bSdPrintFrom = wx.BitmapButton(self,
wx.ID_ANY,
self.images.pngSdprintfrom,
size=(BUTTONDIMWIDE))
self.bSdPrintFrom.Enable(False)
self.Bind(wx.EVT_BUTTON, self.onSdPrintFrom, self.bSdPrintFrom)
self.bSdDelete = wx.BitmapButton(self,
wx.ID_ANY,
self.images.pngSddelete,
size=(BUTTONDIM))
self.bSdDelete.Enable(False)
self.Bind(wx.EVT_BUTTON, self.onSdDelete, self.bSdDelete)
self.bUp = wx.BitmapButton(self,
wx.ID_ANY,
self.images.pngUp,
size=BUTTONDIM)
self.bUp.SetToolTip("Move up one layer")
self.Bind(wx.EVT_BUTTON, self.onUp, self.bUp)
self.bUp.Enable(False)
self.bDown = wx.BitmapButton(self,
wx.ID_ANY,
self.images.pngDown,
size=BUTTONDIM)
self.bDown.SetToolTip("Move down one layer")
self.Bind(wx.EVT_BUTTON, self.onDown, self.bDown)
self.bDown.Enable(False)
szGcf = wx.BoxSizer(wx.HORIZONTAL)
szGcf.AddSpacer(10)
szGcf.Add(self.gcf)
szGcf.Add(self.stLayerText, 1, wx.ALIGN_CENTER_HORIZONTAL, 1)
szGcf.AddSpacer(10)
szNav = wx.BoxSizer(wx.VERTICAL)
szNav.Add(self.bUp, 1, wx.ALIGN_CENTER_HORIZONTAL, 1)
szNav.AddSpacer(10)
szNav.Add(self.slLayers)
szNav.AddSpacer(10)
szNav.Add(self.bDown, 1, wx.ALIGN_CENTER_HORIZONTAL, 1)
szGcf.Add(szNav)
szGcf.AddSpacer(10)
szOpts = wx.BoxSizer(wx.HORIZONTAL)
szOpts.AddSpacer(10)
szOpts.Add(self.cbShowMoves)
szOpts.AddSpacer(10)
szOpts.Add(self.cbShowPrevious)
szOpts.AddSpacer(10)
szOpts.Add(self.cbToolPathOnly)
szOpts.AddSpacer(10)
szOpts.Add(self.cbSyncPrint)
szOpts.AddSpacer(10)
szBtn = wx.BoxSizer(wx.HORIZONTAL)
szBtn.AddSpacer(10)
szBtn.Add(self.bImport)
szBtn.AddSpacer(10)
szBtn.Add(self.bImportQ)
szBtn.AddSpacer(10)
szBtn.Add(self.bOpen)
szBtn.AddSpacer(20)
szBtn.Add(self.bPrint)
szBtn.AddSpacer(10)
szBtn.Add(self.bPause)
if self.sdcard:
szBtn.AddSpacer(20)
szBtn.Add(self.bSdPrintTo)
szBtn.AddSpacer(10)
szBtn.Add(self.bSdPrintFrom)
szBtn.AddSpacer(10)
szBtn.Add(self.bSdDelete)
szBtn.AddSpacer(10)
szDlg = wx.BoxSizer(wx.VERTICAL)
szDlg.AddSpacer(10)
szDlg.Add(szGcf)
szDlg.AddSpacer(10)
szDlg.Add(szOpts)
szDlg.AddSpacer(10)
szDlg.Add(szBtn)
szDlg.AddSpacer(10)
self.SetSizer(szDlg)
self.Fit()
self.Layout()
self.propDlg = PropertiesDlg(self, wparent, self.printerName)
self.propDlg.Show()
if not self.settings.propposition is None:
self.propDlg.SetPosition(self.settings.propposition)
self.enableButtonsByState()
self.reprap.registerPositionHandler(self.updatePrintPosition)
self.reprap.registerEventHandler(self.reprapEvent)
self.reprap.registerSdEventHandler(self.sdcard)
def show(self):
self.Show()
self.Raise()
self.propDlg.Show()
self.propDlg.Raise()
def setLayerText(self, ht):
if ht is None:
htv = 0.0
else:
htv = ht
self.stLayerText.SetLabel("Layer Height: %0.3f" % htv)
def getStatusReport(self):
r = self.propDlg.getStatusReport()
r["PrintStatus"] = PrintState.label[self.state]
return r
def buildTitle(self):
t = "%s print monitor" % self.printerName
if self.gcodeLoaded:
if len(self.gcodeFile) > 45:
t += " - %s" % os.path.basename(self.gcodeFile)
else:
t += " - %s" % self.gcodeFile
return t
def rememberPositions(self):
self.settings.propposition = self.propDlg.GetPosition()
def isPrinting(self):
return self.state in [
PrintState.printing, PrintState.sdprintingto,
PrintState.sdprintingfrom
]
def onClose(self, evt):
if self.isPrinting():
dlg = wx.MessageDialog(self, 'Cannot exit with printing active',
"Printer is active",
wx.OK | wx.ICON_INFORMATION)
dlg.ShowModal()
dlg.Destroy()
return
self.terminate()
def terminate(self):
self.reprap.registerPositionHandler(None)
self.reprap.registerEventHandler(None)
self.parent.closePrintMon()
self.propDlg.Destroy()
self.Destroy()
def onShowMoves(self, evt):
v = self.cbShowMoves.GetValue()
self.settings.showmoves = v
self.gcf.setShowMoves(v)
def onShowPrevious(self, evt):
v = self.cbShowPrevious.GetValue()
self.settings.showprevious = v
self.gcf.setShowPrevious(v)
def onToolPathOnly(self, evt):
v = self.cbToolPathOnly.GetValue()
self.settings.toolpathonly = v
self.gcf.setToolPathsOnly(v)
def onSyncPrint(self, evt):
v = self.cbSyncPrint.GetValue()
self.gcf.setSyncWithPrint(v)
def onLayerScroll(self, evt):
v = self.slLayers.GetValue()
if v == self.currentLayer:
return
self.gcf.setLayer(v)
self.changeLayer(v)
def onUp(self, evt):
lmax = self.slLayers.GetRange()[1]
if self.currentLayer >= lmax:
return
v = self.currentLayer + 1
self.gcf.setLayer(v)
self.changeLayer(v)
def onDown(self, evt):
if self.currentLayer <= 0:
return
v = self.currentLayer - 1
self.gcf.setLayer(v)
self.changeLayer(v)
def onImport(self, evt):
fn = self.wparent.importGcFile()
if fn is None:
return
self.loadGFile(fn)
def onImportFromQueue(self, evt):
fn = self.wparent.importGcFromQueue()
if fn is None:
return
self.loadGFile(fn)
def setImportButton(self, msg):
if msg is None:
self.okToImport = False
self.bImportQ.SetToolTip("")
self.bImportQ.Enable(False)
else:
self.okToImport = True
self.bImportQ.SetToolTip(msg)
self.bImportQ.Enable(self.bOpen.IsEnabled())
def setImportFile(self, fn):
self.importFile = fn
if fn is None:
self.bImport.Enable(False)
self.bImport.SetToolTip("")
else:
self.bImport.Enable(self.bOpen.IsEnabled())
self.bImport.SetToolTip("Import G Code file (%s)" % fn)
def onOpenFile(self, evt):
wildcard = "GCode (*.gcode)|*.gcode;*.GCODE|" \
"All files (*.*)|*.*"
dlg = wx.FileDialog(self,
message="Choose a GCode file",
defaultDir=self.settings.lastdirectory,
defaultFile="",
wildcard=wildcard,
style=wx.FD_OPEN)
rc = dlg.ShowModal()
if rc == wx.ID_OK:
path = dlg.GetPath().encode('ascii', 'ignore')
dlg.Destroy()
if rc != wx.ID_OK:
return
self.loadGFile(path)
def loadGFile(self, path):
self.settings.lastdirectory = os.path.dirname(path)
self.loadGCode(path)
if self.gObj is None:
lmax = 1
self.slLayers.Enable(False)
self.bUp.Enable(False)
self.bDown.Enable(False)
else:
lmax = self.gObj.layerCount() - 1
self.slLayers.Enable(True)
self.bUp.Enable(True)
self.bDown.Enable(True)
self.slLayers.SetRange(0, lmax)
self.slLayers.SetPageSize(int(lmax / 10))
self.gcf.loadModel(self.gObj)
self.changeLayer(0)
self.state = PrintState.idle
self.oldState = None
self.enableButtonsByState()
t = self.buildTitle()
self.SetTitle(t)
self.propDlg.setPrintStatus(PrintState.idle)
def loadGCode(self, fn):
def gnormal(s):
if ";" in s:
return s.split(";")[0].rstrip()
else:
return s.rstrip()
self.gcodeFile = None
self.gcodeLoaded = False
self.gcode = []
self.gObj = None
self.maxLine = 0
self.totalTime = 0
self.totalTimeStr = ""
self.layerTimes = []
self.layerTimeStr = []
self.propDlg.clearAllProperties()
self.reprap.clearPrint()
if fn is None:
return
try:
gc = list(open(fn))
except:
self.log("Error opening file %s" % fn)
self.gcode = []
self.gObj = None
self.gcodeLoaded = False
return
self.gcode = [s for s in map(gnormal, gc) if s.strip() != ""]
self.gObj = self.buildModel()
self.maxLine = self.gObj.getMaxLine()
self.eUsed = self.gObj.getFilament()
self.gcodeLoaded = True
self.gcodeFile = pfn = fn
if len(pfn) > 45:
pfn = os.path.basename(fn)
self.propDlg.setProperty(PropertyEnum.fileName, pfn)
ftime = time.strftime('%y/%m/%d-%H:%M:%S',
time.localtime(os.path.getmtime(fn)))
self.propDlg.setProperty(PropertyEnum.sliceTime, ftime)
self.propDlg.setProperty(PropertyEnum.printEstimate, self.totalTimeStr)
if self.settings.nextruders < self.maxTool + 1:
self.log(
"G Code file uses more tools (%d) than printer is equipped with (%d)"
% (self.maxTool + 1, self.settings.nextruders))
slCfg, filSiz, tempsHE, tempsBed = parseGCSuffix(gc)
if tempsBed == "??":
tBed = 0
else:
try:
tBed = int(float(tempsBed))
except:
tBed = 0
if tempsHE == "??":
tHe = [0] * self.settings.nextruders
else:
try:
x = [int(float(x)) for x in re.split(", *", tempsHE)
] + [0] * self.settings.nextruders
tHe = x[:self.settings.nextruders]
except:
tHe = [0] * self.settings.nextruders
self.parent.registerGCodeTemps(tHe, tBed)
self.propDlg.setProperty(PropertyEnum.slicerCfg, slCfg)
self.propDlg.setProperty(PropertyEnum.filamentSize, filSiz)
self.propDlg.setProperty(PropertyEnum.temperatures,
"HE:%s BED:%s" % (tempsHE, tempsBed))
def updatePrintPosition(self, position):
self.printLayer = self.getLayerByPosition(position)
self.printPosition = position
if self.state in [PrintState.printing, PrintState.sdprintingto]:
posString = "%d/%d" % (position, self.maxLine)
if self.maxLine != 0:
pct = float(position) / float(self.maxLine) * 100.0
posString += " (%.1f%%)" % pct
self.propDlg.setProperty(PropertyEnum.position, posString)
self.gcf.setPrintPosition(position)
lx = self.gcf.getCurrentLayer()
if lx != self.currentLayer:
self.changeLayer(lx)
layersSplit = self.sumLayerTimes(self.printLayer)
layerSplit = self.partialPrintingLayer()
self.elapsed = time.time() - self.startTime
expected = layersSplit[0] + layerSplit[0]
elapsedStr = "%s (expected: %s)" % (formatElapsed(
self.elapsed), formatElapsed(expected))
self.propDlg.setProperty(PropertyEnum.elapsed, elapsedStr)
self.remaining = layersSplit[1] + layerSplit[1]
self.propDlg.setProperty(PropertyEnum.remaining,
formatElapsed(self.remaining))
#TODO - probably don't need all the various time estimates when printing TO CD
# BUT IT MAY BREAK LOGIC BELOW (update time until) that rely on these values
newEta = time.time() + self.remaining
revisedStr = time.strftime('%H:%M:%S', time.localtime(newEta))
tdiff = newEta - self.origEta
if tdiff < 0:
revisedStr += " (%s ahead of estimate)" % formatElapsed(
-tdiff)
elif tdiff > 0:
revisedStr += " (%s behind estimate)" % formatElapsed(tdiff)
self.propDlg.setProperty(PropertyEnum.revisedEta, revisedStr)
self.updateTimeUntil()
elif self.state == PrintState.sdprintingfrom:
#TODO Need to convey print position when printing from SD card
pass
def getLayerByPosition(self, pos):
for lx in range(len(self.layerMap)):
if self.layerMap[lx][0] <= pos and pos <= self.layerMap[lx][1]:
return lx
return 0
def partialPrintingLayer(self):
f, l = self.gObj.getGCodeLines(self.printLayer)
if f <= self.printPosition and self.printPosition <= l:
done = self.printPosition - f
todo = l - self.printPosition + 1
total = l - f + 1
lt = self.layerTimes[self.printLayer]
pctDone = float(done) / float(total)
pctToDo = float(todo) / float(total)
return (pctDone * lt, pctToDo * lt)
else:
return (0.0, 0.0)
def sumLayerTimes(self, lx):
tBefore = sum(self.layerTimes[:lx])
tAfter = sum(self.layerTimes[lx + 1:])
return (tBefore, tAfter)
def sumLayerRangeTime(self, slx, elx):
return sum(self.layerTimes[slx:elx])
def changeLayer(self, lx):
self.currentLayer = lx
self.slLayers.SetValue(lx)
ht = self.gObj.getLayerHeight(lx)
self.setLayerText(ht)
if ht is None:
self.propDlg.setProperty(PropertyEnum.layerNum,
"%d / %d" % (lx, self.gObj.layerCount()))
else:
self.propDlg.setProperty(
PropertyEnum.layerNum,
"%d / %d (%.2f mm) " % (lx, self.gObj.layerCount(), ht))
f, l = self.gObj.getGCodeLines(lx)
if f is None:
self.propDlg.setProperty(PropertyEnum.gCodeRange, "")
self.layerRange = (0, 0)
else:
self.propDlg.setProperty(PropertyEnum.gCodeRange,
"%d - %d" % (f, l))
self.layerRange = (f, l)
x0, y0, xn, yn = self.gObj.getLayerMinMaxXY(lx)
if x0 is None:
self.propDlg.setProperty(PropertyEnum.minMaxXY, "")
else:
self.propDlg.setProperty(
PropertyEnum.minMaxXY,
"(%.2f, %.2f) - (%.2f, %.2f)" % (x0, y0, xn, yn))
le, prior, after = self.gObj.getLayerFilament(lx)
s = []
for i in range(self.settings.nextruders):
s.append("%.2f/%.2f <: %.2f >: %.2f" %
(le[i], self.eUsed[i], prior[i], after[i]))
self.propDlg.setProperty(PropertyEnum.filamentUsed, s)
self.propDlg.setProperty(
PropertyEnum.layerPrintTime,
"%s / %s" % (self.layerTimeStr[lx], self.totalTimeStr))
self.updateTimeUntil()
def updateTimeUntil(self):
if self.currentLayer <= self.printLayer:
self.propDlg.setProperty(PropertyEnum.timeUntil, "")
elif self.printPosition is None:
t = sum(self.layerTimes[:self.currentLayer])
self.propDlg.setProperty(PropertyEnum.timeUntil, formatElapsed(t))
else:
t = sum(self.layerTimes[self.printLayer + 1:self.currentLayer]
) + self.partialPrintingLayer()[1]
self.propDlg.setProperty(PropertyEnum.timeUntil, formatElapsed(t))
def reprapEvent(self, evt):
if evt.event == RepRapEventEnum.PRINT_COMPLETE:
# TODO - do I need special consideration here for print FROM SD
if self.state == PrintState.sdprintingto:
self.reprap.sendNow("M29 %s" % self.sdTargetFile)
self.reprap.suspendTempProbe(False)
self.setSDTargetFile(None)
if self.state == PrintState.printing:
self.history.addEvent(
PrintCompleted(self.history.addFile(self.gcodeFile), ""))
self.state = PrintState.idle
self.oldState = None
self.propDlg.setPrintStatus(PrintState.idle)
self.gcf.setPrintPosition(-1)
self.printPosition = None
self.printLayer = 0
self.enableButtonsByState()
self.elapsed = time.time() - self.startTime
cmpTime = time.time()
expCmpTime = self.origEta - self.startTime
cmpTimeStr = time.strftime('%H:%M:%S', time.localtime(cmpTime))
self.log("Print completed at %s" % (cmpTimeStr))
self.log("Total print time of %s - expected print time %s" %
(formatElapsed(self.elapsed), formatElapsed(expCmpTime)))
self.reprap.printComplete()
elif evt.event == RepRapEventEnum.PRINT_STOPPED:
if self.state != PrintState.paused:
self.oldState = self.state
self.state = PrintState.paused
self.propDlg.setPrintStatus(PrintState.paused)
self.enableButtonsByState()
self.reprap.printStopped()
elif evt.event == RepRapEventEnum.PRINT_STARTED:
pass
elif evt.event == RepRapEventEnum.PRINT_RESUMED:
pass
elif evt.event == RepRapEventEnum.PRINT_ERROR:
self.log("Error communicating with printer")
elif evt.event == RepRapEventEnum.PRINT_SENDGCODE:
self.log(evt.msg)
else:
self.log("unknown reprap event: %s" % str(evt.event))
def buildModel(self):
cnc = CNC(self.settings.acceleration, self.settings.layerheight)
if RECORD_TIMES:
self.log("recording g code times in /tmp/gcodeTimes")
fp = open("/tmp/gcodeTimes", "w")
ln = -1
for gl in self.gcode:
ln += 1
p = re.split("\\s+", gl, 1)
params = {}
if not (p[0].strip() in ["M117", "m117"]):
if len(p) >= 2:
self.paramStr = p[1]
if "X" in self.paramStr:
params["X"] = self._get_float("X")
if "Y" in self.paramStr:
params["Y"] = self._get_float("Y")
if "Z" in self.paramStr:
params["Z"] = self._get_float("Z")
if "E" in self.paramStr:
params["E"] = self._get_float("E")
if "F" in self.paramStr:
params["F"] = self._get_float("F")
if "S" in self.paramStr:
params["S"] = self._get_float("S")
if "P" in self.paramStr:
params["P"] = self._get_float("P")
t = cnc.execute(p[0], params, ln)
if RECORD_TIMES:
fp.write("(%s) (%.3f)\n" % (gl, t))
if RECORD_TIMES:
fp.close()
gobj = cnc.getGObject()
gobj.setMaxLine(ln)
self.maxTool = cnc.getMaxTool()
self.totalTime, self.layerTimes = cnc.getTimes()
self.layerMap = []
for lx in range(len(gobj)):
self.layerMap.append(gobj.getGCodeLines(lx))
self.totalTimeStr = formatElapsed(self.totalTime)
self.layerTimeStr = [formatElapsed(s) for s in self.layerTimes]
return gobj
def _get_float(self, which):
try:
return float(gcRegex.findall(self.paramStr.split(which)[1])[0])
except:
self.log("unable to parse float from (%s)" % self.paramStr)
def enableButtonsByState(self):
if self.state == PrintState.idle:
self.bOpen.Enable(True)
self.setImportFile(self.importFile)
self.bImportQ.Enable(self.okToImport)
if self.sdcard:
self.bSdPrintTo.Enable(self.gcodeLoaded)
self.bSdPrintFrom.Enable()
self.bSdDelete.Enable()
if self.gcodeLoaded:
self.bPrint.Enable(True)
self.bPrint.setPrint()
self.bPause.Enable(False)
self.bPause.setPause()
else:
self.bPrint.Enable(False)
self.bPause.Enable(False)
elif self.state in [PrintState.printing, PrintState.sdprintingto]:
self.bImport.Enable(False)
self.bImportQ.Enable(False)
self.bOpen.Enable(False)
self.bPrint.Enable(False)
self.bPrint.setPrint()
self.bPause.Enable(True)
self.bPause.setPause()
if self.sdcard:
self.bSdPrintTo.Enable(False)
self.bSdPrintFrom.Enable(False)
self.bSdDelete.Enable(False)
elif self.state == PrintState.sdprintingfrom:
#TODO - what makes sense here
pass
elif self.state == PrintState.paused:
self.bOpen.Enable(True)
self.setImportFile(self.importFile)
self.bImportQ.Enable(self.okToImport)
self.bPrint.Enable(True)
self.bPrint.setRestart()
self.bPause.Enable(True)
self.bPause.setResume()
if self.sdcard:
self.bSdPrintTo.Enable(self.gcodeLoaded)
self.bSdPrintFrom.Enable()
self.bSdDelete.Enable()
def emulatePrintButton(self):
if self.state in [
PrintState.printing, PrintState.sdprintingto,
PrintState.sdprintingfrom
]:
self.log("Already printing")
elif not self.bPrint.IsEnabled():
self.log("Unable to print right now")
else:
self.onPrint(None)
def reset(self):
#TODO - cleanup if was sdprintingfrom
self.state = PrintState.idle
self.oldState = None
self.reprap.suspendTempProbe(False)
self.setSDTargetFile(None)
self.propDlg.setPrintStatus(PrintState.idle)
self.enableButtonsByState()
def onPrint(self, evt):
oldState = self.state
self.state = PrintState.printing
self.propDlg.setPrintStatus(PrintState.printing)
self.enableButtonsByState()
self.printPos = 0
self.startTime = time.time()
self.endTime = None
self.origEta = self.startTime + self.totalTime
self.elapsed = 0
self.remaining = self.totalTime
if oldState == PrintState.paused:
action = "restarted"
self.reprap.restartPrint(self.gcode)
else:
action = "started"
self.reprap.startPrint(self.gcode)
self.history.addEvent(
PrintStarted(self.history.addFile(self.gcodeFile), ""))
stime = time.strftime('%H:%M:%S', time.localtime(self.startTime))
self.propDlg.setProperty(PropertyEnum.startTime, stime)
self.propDlg.setProperty(
PropertyEnum.origEta,
time.strftime('%H:%M:%S', time.localtime(self.origEta)))
self.propDlg.setProperty(PropertyEnum.elapsed,
formatElapsed(self.elapsed))
self.propDlg.setProperty(PropertyEnum.remaining,
formatElapsed(self.remaining))
self.propDlg.setProperty(PropertyEnum.revisedEta, "")
self.log("Print %s at %s" % (action, stime))
def onSdPrintFrom(self, evt):
print "sd print from"
def doSDPrintFrom(self, evt):
self.printing = False
self.paused = False
self.sdpaused = False
self.sdprintingfrom = True
self.sdStartTime = time.time()
#self.infoPane.setSDStartTime(self.sdStartTime)
self.state = PrintState.printing
#self.propDlg.setPrintStatus(PrintState.printing)
self.enableButtonsByState()
self.sdcard.startPrintFromSD()
def cancelSDPrintFrom(self):
self.sdprintingfrom = False
self.printing = False
self.paused = False
self.state = PrintState.idle
#self.propDlg.setPrintStatus(PrintState.printing)
self.enableButtonsByState()
def resumeSDPrintFrom(self, fn):
#self.clearModel()
self.reprap.sendNow("M23 " + fn[1].lower())
self.reprap.sendNow("M24")
self.sdprintingfrom = True
#self.M27Timer.Start(M27Interval, True)
self.sdpaused = False
#self.infoPane.setMode(MODE_FROM_SD)
self.enableButtonsByState()
def onSdPrintTo(self, evt):
self.sdcard.startPrintToSD()
def resumeSDPrintTo(self, tfn):
self.setSDTargetFile(tfn[1].lower())
self.reprap.suspendTempProbe(True)
self.reprap.sendNow("M28 %s" % self.sdTargetFile)
self.printPos = 0
self.startTime = time.time()
self.endTime = None
self.reprap.startPrint(self.gcode)
self.origEta = self.startTime + self.totalTime
self.elapsed = 0
self.remaining = self.totalTime
self.state = PrintState.sdprintingto
stime = time.strftime('%H:%M:%S', time.localtime(self.startTime))
self.propDlg.setProperty(PropertyEnum.startTime, stime)
self.propDlg.setProperty(
PropertyEnum.origEta,
time.strftime('%H:%M:%S', time.localtime(self.origEta)))
self.propDlg.setProperty(PropertyEnum.elapsed,
formatElapsed(self.elapsed))
self.propDlg.setProperty(PropertyEnum.remaining,
formatElapsed(self.remaining))
self.propDlg.setProperty(PropertyEnum.revisedEta, "")
self.log("Print to SD: %s started at %s" % (self.sdTargetFile, stime))
self.enableButtonsByState()
def setSDTargetFile(self, tfn):
self.sdTargetFile = tfn
self.propDlg.setSDTargetFile(tfn)
def onSdDelete(self, evt):
self.sdcard.startDeleteFromSD()
def emulatePauseButton(self):
if not self.bPause.IsEnabled():
self.log("Unable to pause right now")
else:
self.onPause(None)
def onPause(self, evt):
if self.state == PrintState.paused:
self.state = self.oldState
if self.state is None:
self.state = PrintState.printing
self.propDlg.setPrintStatus(self.state)
self.enableButtonsByState()
self.reprap.resumePrint()
else:
self.oldState = self.state
self.state = PrintState.paused
self.propDlg.setPrintStatus(PrintState.paused)
self.enableButtonsByState()
self.reprap.pausePrint()