def main(network, equipment, source, destination, req = None):
result_dicts = {}
network_data = [{
'network_name' : str(args.filename),
'source' : source.uid,
'destination' : destination.uid
}]
result_dicts.update({'network': network_data})
design_data = [{
'power_mode' : equipment['Spans']['default'].power_mode,
'span_power_range' : equipment['Spans']['default'].delta_power_range_db,
'design_pch' : equipment['SI']['default'].power_dbm,
'baud_rate' : equipment['SI']['default'].baud_rate
}]
result_dicts.update({'design': design_data})
simulation_data = []
result_dicts.update({'simulation results': simulation_data})
power_mode = equipment['Spans']['default'].power_mode
print('\n'.join([f'Power mode is set to {power_mode}',
f'=> it can be modified in eqpt_config.json - Spans']))
pref_ch_db = lin2db(req.power*1e3) #reference channel power / span (SL=20dB)
pref_total_db = pref_ch_db + lin2db(req.nb_channel) #reference total power / span (SL=20dB)
build_network(network, equipment, pref_ch_db, pref_total_db)
path = compute_constrained_path(network, req)
spans = [s.length for s in path if isinstance(s, Fiber)]
print(f'\nThere are {len(spans)} fiber spans over {sum(spans):.0f}m between {source.uid} and {destination.uid}')
print(f'\nNow propagating between {source.uid} and {destination.uid}:')
try:
p_start, p_stop, p_step = equipment['SI']['default'].power_range_db
p_num = abs(int(round((p_stop - p_start)/p_step))) + 1 if p_step != 0 else 1
power_range = list(linspace(p_start, p_stop, p_num))
except TypeError:
print('invalid power range definition in eqpt_config, should be power_range_db: [lower, upper, step]')
power_range = [0]
for dp_db in power_range:
req.power = db2lin(pref_ch_db + dp_db)*1e-3
print(f'\nPropagating with input power = {lin2db(req.power*1e3):.2f}dBm :')
infos = propagate2(path, req, equipment, show=len(power_range)==1)
print(f'\nTransmission result for input power = {lin2db(req.power*1e3):.2f}dBm :')
print(destination)
#print(f'\n !!!!!!!!!!!!!!!!! TEST POINT !!!!!!!!!!!!!!!!!!!!!')
#print(f'carriers ase output of {path[1]} =\n {list(path[1].carriers("out", "nli"))}')
# => use "in" or "out" parameter
# => use "nli" or "ase" or "signal" or "total" parameter
simulation_data.append({
'Pch_dBm' : pref_ch_db + dp_db,
'OSNR_ASE_0.1nm' : round(mean(destination.osnr_ase_01nm),2),
'OSNR_ASE_signal_bw' : round(mean(destination.osnr_ase),2),
'SNR_nli_signal_bw' : round(mean(destination.osnr_nli),2),
'SNR_total_signal_bw' : round(mean(destination.snr),2)
})
write_csv(result_dicts, 'simulation_result.csv')
return path, infos
def test_json_response_generation(xls_input, expected_response_file):
""" tests if json response is correctly generated for all combinations of requests
"""
data = convert_service_sheet(xls_input, eqpt_filename)
equipment = load_equipment(eqpt_filename)
network = load_network(xls_input, equipment)
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(automatic_nch(equipment['SI']['default'].f_min,\
equipment['SI']['default'].f_max, equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
rqs = requests_from_json(data, equipment)
rqs = correct_route_list(network, rqs)
dsjn = disjunctions_from_json(data)
dsjn = correct_disjn(dsjn)
rqs, dsjn = requests_aggregation(rqs, dsjn)
pths = compute_path_dsjctn(network, equipment, rqs, dsjn)
propagatedpths = compute_path_with_disjunction(network, equipment, rqs, pths)
result = []
for i, pth in enumerate(propagatedpths):
result.append(Result_element(rqs[i], pth))
temp = {
'response': [n.json for n in result]
}
# load expected result and compare keys
# (not values at this stage)
with open(expected_response_file) as jsonfile:
expected = load(jsonfile)
for i, response in enumerate(temp['response']):
assert compare_response(expected['response'][i], response)
def test_disjunction(net,eqpt,serv):
data = load_requests(serv, eqpt, bidir=False)
equipment = load_equipment(eqpt)
network = load_network(net,equipment)
# Build the network once using the default power defined in SI in eqpt config
# power density : db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(automatic_nch(equipment['SI']['default'].f_min,\
equipment['SI']['default'].f_max, equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
build_oms_list(network, equipment)
rqs = requests_from_json(data, equipment)
rqs = correct_route_list(network, rqs)
dsjn = disjunctions_from_json(data)
pths = compute_path_dsjctn(network, equipment, rqs, dsjn)
print(dsjn)
dsjn_list = [d.disjunctions_req for d in dsjn ]
# assumes only pairs in dsjn list
test = True
for e in dsjn_list:
rqs_id_list = [r.request_id for r in rqs]
p1 = pths[rqs_id_list.index(e[0])][1:-1]
p2 = pths[rqs_id_list.index(e[1])][1:-1]
if isdisjoint(p1, p2) + isdisjoint(p1, find_reversed_path(p2)) > 0:
test = False
print(f'Computed path (roadms):{[e.uid for e in p1 if isinstance(e, Roadm)]}\n')
print(f'Computed path (roadms):{[e.uid for e in p2 if isinstance(e, Roadm)]}\n')
break
print(dsjn_list)
assert test
def propagation(input_power, con_in, con_out,dest):
equipment = load_equipment(eqpt_library_name)
network = load_network(network_file_name,equipment)
build_network(network, equipment, 0, 20)
# parametrize the network elements with the con losses and adapt gain
# (assumes all spans are identical)
for e in network.nodes():
if isinstance(e, Fiber):
loss = e.loss_coef * e.length
e.con_in = con_in
e.con_out = con_out
if isinstance(e, Edfa):
e.operational.gain_target = loss + con_in + con_out
transceivers = {n.uid: n for n in network.nodes() if isinstance(n, Transceiver)}
p = input_power
p = db2lin(p) * 1e-3
spacing = 50e9 # THz
si = create_input_spectral_information(191.3e12, 191.3e12+79*spacing, 0.15, 32e9, p, spacing)
source = next(transceivers[uid] for uid in transceivers if uid == 'trx A')
sink = next(transceivers[uid] for uid in transceivers if uid == dest)
path = dijkstra_path(network, source, sink)
for el in path:
si = el(si)
print(el) # remove this line when sweeping across several powers
edfa_sample = next(el for el in path if isinstance(el, Edfa))
nf = mean(edfa_sample.nf)
print(f'pw: {input_power} conn in: {con_in} con out: {con_out}',
f'[email protected]: {round(mean(sink.osnr_ase_01nm),2)}',
f'SNR@bandwitdth: {round(mean(sink.snr),2)}')
return sink , nf
def setup_trx():
"""init transceiver class to access snr and osnr calculations"""
equipment = load_equipment(eqpt_library)
network = load_network(test_network, equipment)
build_network(network, equipment, 0, 20)
trx = [n for n in network.nodes() if isinstance(n, Transceiver)][0]
return trx
def test_excel_service_json_generation(xls_input, expected_json_output):
""" test services creation
"""
equipment = load_equipment(eqpt_filename)
network = load_network(DATA_DIR / 'testTopology.xls', equipment)
# Build the network once using the default power defined in SI in eqpt config
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
from_xls = read_service_sheet(xls_input,
equipment,
network,
network_filename=DATA_DIR /
'testTopology.xls')
expected = load_json(expected_json_output)
results = compare_services(expected, from_xls)
assert not results.requests.missing
assert not results.requests.extra
assert not results.requests.different
assert not results.synchronizations.missing
assert not results.synchronizations.extra
assert not results.synchronizations.different
def test_auto_design_generation_fromxlsgainmode(tmpdir, xls_input,
expected_json_output):
""" tests generation of topology json
test that the build network gives correct results in gain mode
"""
equipment = load_equipment(eqpt_filename)
network = load_network(xls_input, equipment)
# in order to test the Eqpt sheet and load gain target,
# change the power-mode to False (to be in gain mode)
equipment['Span']['default'].power_mode = False
# Build the network once using the default power defined in SI in eqpt config
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
actual_json_output = tmpdir / xls_input.with_name(
xls_input.stem + '_auto_design').with_suffix('.json').name
save_network(network, actual_json_output)
actual = load_json(actual_json_output)
unlink(actual_json_output)
expected = load_json(expected_json_output)
results = compare_networks(expected, actual)
assert not results.elements.missing
assert not results.elements.extra
assert not results.elements.different
assert not results.connections.missing
assert not results.connections.extra
assert not results.connections.different
def setup_edfa_fixed_gain():
"""init edfa class by reading the 2nd edfa in test_network.json file"""
equipment = load_equipment(eqpt_library)
network = load_network(test_network, equipment)
build_network(network, equipment, 0, 20)
edfa = [n for n in network.nodes() if isinstance(n, Edfa)][1]
yield edfa
def test_auto_design_generation_fromxlsgainmode(xls_input,
expected_json_output):
equipment = load_equipment(eqpt_filename)
network = load_network(xls_input, equipment)
# in order to test the Eqpt sheet and load gain target, change the power-mode to False (to be in gain mode)
equipment['Span']['default'].power_mode = False
# Build the network once using the default power defined in SI in eqpt config
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(automatic_nch(equipment['SI']['default'].f_min,\
equipment['SI']['default'].f_max, equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
save_network(xls_input, network)
actual_json_output = f'{str(xls_input)[0:len(str(xls_input))-4]}_auto_design.json'
with open(actual_json_output, encoding='utf-8') as f:
actual = load(f)
unlink(actual_json_output)
with open(expected_json_output, encoding='utf-8') as f:
expected = load(f)
results = compare_networks(expected, actual)
assert not results.elements.missing
assert not results.elements.extra
assert not results.elements.different
assert not results.connections.missing
assert not results.connections.extra
assert not results.connections.different
def test_does_not_loop_back(net, eqpt, serv):
data = load_requests(serv, eqpt)
equipment = load_equipment(eqpt)
network = load_network(net, equipment)
# Build the network once using the default power defined in SI in eqpt config
# power density : db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(automatic_nch(equipment['SI']['default'].f_min,\
equipment['SI']['default'].f_max, equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
rqs = requests_from_json(data, equipment)
rqs = correct_route_list(network, rqs)
dsjn = disjunctions_from_json(data)
pths = compute_path_dsjctn(network, equipment, rqs, dsjn)
# check that computed paths do not loop back ie each element appears only once
test = True
for p in pths:
for el in p:
p.remove(el)
a = [e for e in p if e.uid == el.uid]
if a:
test = False
break
assert test
def propagation(input_power, network, sim_path, initial_slot, num_slots, eqpt):
""" Calculate and output SNR based on inputs
input_power: Power in decibels
network: Network created from GNPy topology
sim_path: list of nodes service will travel through
num_slots: number of slots in service
eqpt: equipment library for GNPy """
# Values to create Spectral Information object
spacing = 12.5e9
min_freq = 195942783006536 + initial_slot * spacing
max_freq = min_freq + (num_slots - 1) * spacing
p = input_power
p = db2lin(p) * 1e-3
si = create_input_spectral_information(min_freq, max_freq, 0.15, 32e9, p,
spacing)
p_total_db = input_power + lin2db(
automatic_nch(min_freq, max_freq, spacing))
build_network(network, eqpt, input_power, p_total_db)
# Store network elements
transceivers = {
n.uid: n
for n in network.nodes() if isinstance(n, Transceiver)
}
fibers = {n.uid: n for n in network.nodes() if isinstance(n, Fiber)}
edfas = {n.uid: n for n in network.nodes() if isinstance(n, Edfa)}
# Recreate path in the GNPy network using node list from simulator
path = []
for index, node in enumerate(sim_path):
# add transceiver to path
path.append(transceivers[node])
# add fiber connecting transceivers to path, unless source transceiver is last in path
if index + 1 < len(sim_path):
fiber_str = f"Fiber ({node} \u2192 {sim_path[index+1]})"
for uid in fibers:
# add all fibers to path even if they are split up
if uid[0:len(fiber_str)] == fiber_str:
path.append(fibers[uid])
# add amplifier to path, if necessary
edfa = f"Edfa0_{uid}"
fiber_neighbors = [
n.uid for n in neighbors(network, fibers[uid])
]
if edfa in edfas and edfa in fiber_neighbors:
path.append(edfas[edfa])
# Calculate effects of physical layer impairments
for el in path:
si = el(si)
destination_node = path[-1]
return destination_node.snr
def setup_edfa_variable_gain():
"""init edfa class by reading test_network.json file
remove all gain and nf ripple"""
equipment = load_equipment(eqpt_library)
network = load_network(test_network, equipment)
build_network(network, equipment,0, 20)
edfa = [n for n in network.nodes() if isinstance(n, Edfa)][0]
edfa.gain_ripple = zeros(96)
edfa.interpol_nf_ripple = zeros(96)
yield edfa
def setup(equipment):
""" common setup for tests: builds network, equipment and oms only once
"""
network = load_network(NETWORK_FILENAME, equipment)
spectrum = equipment['SI']['default']
p_db = spectrum.power_dbm
p_total_db = p_db + lin2db(automatic_nch(spectrum.f_min, spectrum.f_max, spectrum.spacing))
build_network(network, equipment, p_db, p_total_db)
oms_list = build_oms_list(network, equipment)
return network, oms_list
def test_automaticmodefeature(net, eqpt, serv, expected_mode):
data = load_requests(serv, eqpt, bidir=False)
equipment = load_equipment(eqpt)
network = load_network(net, equipment)
# Build the network once using the default power defined in SI in eqpt config
# power density : db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(automatic_nch(equipment['SI']['default'].f_min,\
equipment['SI']['default'].f_max, equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
rqs = requests_from_json(data, equipment)
rqs = correct_route_list(network, rqs)
dsjn = []
pths = compute_path_dsjctn(network, equipment, rqs, dsjn)
path_res_list = []
for i, pathreq in enumerate(rqs):
# use the power specified in requests but might be different from the one specified for design
# the power is an optional parameter for requests definition
# if optional, use the one defines in eqt_config.json
p_db = lin2db(pathreq.power * 1e3)
p_total_db = p_db + lin2db(pathreq.nb_channel)
print(f'request {pathreq.request_id}')
print(f'Computing path from {pathreq.source} to {pathreq.destination}')
print(f'with path constraint: {[pathreq.source]+pathreq.nodes_list}'
) #adding first node to be clearer on the output
total_path = pths[i]
print(
f'Computed path (roadms):{[e.uid for e in total_path if isinstance(e, Roadm)]}\n'
)
# for debug
# print(f'{pathreq.baud_rate} {pathreq.power} {pathreq.spacing} {pathreq.nb_channel}')
if pathreq.baud_rate is not None:
print(pathreq.format)
path_res_list.append(pathreq.format)
total_path = propagate(total_path, pathreq, equipment)
else:
total_path, mode = propagate_and_optimize_mode(
total_path, pathreq, equipment)
# if no baudrate satisfies spacing, no mode is returned and an empty path is returned
# a warning is shown in the propagate_and_optimize_mode
if mode is not None:
print(mode['format'])
path_res_list.append(mode['format'])
else:
print('nok')
path_res_list.append('nok')
print(path_res_list)
assert path_res_list == expected_mode
def test_setup():
""" common setup for tests: builds network, equipment and oms only once
"""
equipment = load_equipment(EQPT_LIBRARY_NAME)
network = load_network(NETWORK_FILE_NAME, equipment)
# Build the network once using the default power defined in SI in eqpt config
# power density : db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max, equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
build_oms_list(network, equipment)
return network, equipment
def test_no_amp_feature(node_uid):
''' Check that booster is not placed on a roadm if fused is specified
test_parser covers partly this behaviour. This test should guaranty that the
feature is preserved even if convert is changed
'''
equipment = load_equipment(EQPT_LIBRARY_NAME)
json_network = load_json(NETWORK_FILE_NAME)
for elem in json_network['elements']:
if elem['uid'] == node_uid:
# replace edfa node by a fused node in the topology
elem['type'] = 'Fused'
elem.pop('type_variety')
elem.pop('operational')
elem['params'] = {'loss': 0}
next_node_uid = next(conn['to_node']
for conn in json_network['connections']
if conn['from_node'] == node_uid)
previous_node_uid = next(conn['from_node']
for conn in json_network['connections']
if conn['to_node'] == node_uid)
network = network_from_json(json_network, equipment)
# Build the network once using the default power defined in SI in eqpt config
# power density : db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
node = next(nd for nd in network.nodes() if nd.uid == node_uid)
next_node = next(network.successors(node))
previous_node = next(network.predecessors(node))
if not isinstance(node, Fused):
raise AssertionError()
if not node.params.loss == 0.0:
raise AssertionError()
if not next_node_uid == next_node.uid:
raise AssertionError()
if not previous_node_uid == previous_node.uid:
raise AssertionError()
def test_target_pch_out_db_global(case):
""" check that per degree attributes are correctly created with global values if none are given
"""
json_network = setup_per_degree(case)
per_degree = {}
for elem in json_network['elements']:
if 'type' in elem.keys() and elem['type'] == 'Roadm' and 'params' in elem.keys() \
and 'per_degree_pch_out_db' in elem['params']:
# records roadms that have a per degree target
per_degree[elem['uid']] = {
k: v
for k, v in elem['params']['per_degree_pch_out_db'].items()
}
network = network_from_json(json_network, equipment)
# Build the network once using the default power defined in SI in eqpt config
# power density: db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
data = network_to_json(network)
for elem in data['elements']:
if 'type' in elem.keys() and elem['type'] == 'Roadm':
# check that power target attributes exist and are filled with correct values
# first check that global 'target_pch_out_db' is correctly filled
assert elem['params']['target_pch_out_db'] == equipment['Roadm'][
'default'].target_pch_out_db
for degree, power in elem['params']['per_degree_pch_out_db'].items(
):
if elem['uid'] not in per_degree.keys():
# second: check that per degree 'target_pch_out_db' is correctly filled with global value
# when there was no per degree specification on network input
assert power == equipment['Roadm'][
'default'].target_pch_out_db
else:
if degree not in per_degree[elem['uid']].keys():
# third: check that per degree 'target_pch_out_db' is correctly filled with global value
# on degrees that had no specification when other degrees are filled
assert power == equipment['Roadm'][
'default'].target_pch_out_db
else:
# fourth: check that per degree 'target_pch_out_db' is correctly filled with specified values
assert power == per_degree[elem['uid']][degree]
def test_ase_noise(gain, si, setup_trx, bw):
"""testing 3 different ways of calculating osnr:
1-pin-edfa.nf+58 vs
2-pout/pase afet propagate
3-Transceiver osnr_ase_01nm
=> unitary test for Edfa.noise_profile (Edfa.interpol_params, Edfa.propagate)"""
equipment = load_equipment(eqpt_library)
network = load_network(test_network, equipment)
edfa = next(n for n in network.nodes() if n.uid == 'Edfa1')
span = next(n for n in network.nodes() if n.uid == 'Span1')
# update span1 and Edfa1 according to new gain before building network
# updating span 1 avoids to overload amp
span.params.length = gain * 1e3 / 0.2
edfa.operational.gain_target = gain
build_network(network, equipment, 0, 20)
edfa.gain_ripple = zeros(96)
edfa.interpol_nf_ripple = zeros(96)
# propagate in span1 to have si with the correct power level
si = span(si)
print(span)
frequencies = array([c.frequency for c in si.carriers])
pin = array(
[c.power.signal + c.power.nli + c.power.ase for c in si.carriers])
baud_rates = array([c.baud_rate for c in si.carriers])
pref = Pref(0, -gain, lin2db(len(frequencies)))
edfa.interpol_params(frequencies, pin, baud_rates, pref)
nf = edfa.nf
print('nf', nf)
pin = lin2db(pin[0] * 1e3)
osnr_expected = pin - nf[0] + 58
si = edfa(si)
print(edfa)
pout = array([c.power.signal for c in si.carriers])
pase = array([c.power.ase for c in si.carriers])
osnr = lin2db(pout[0] / pase[0]) - lin2db(12.5e9 / bw)
assert pytest.approx(osnr_expected, abs=0.01) == osnr
trx = setup_trx
si = trx(si)
osnr = trx.osnr_ase_01nm[0]
assert pytest.approx(osnr_expected, abs=0.01) == osnr
def compute_path(network, equipment, pathreqlist):
# This function is obsolete and not relevant with respect to network building: suggest either to correct
# or to suppress it
path_res_list = []
for pathreq in pathreqlist:
#need to rebuid the network for each path because the total power
#can be different and the choice of amplifiers in autodesign is power dependant
#but the design is the same if the total power is the same
#TODO parametrize the total spectrum power so the same design can be shared
p_db = lin2db(pathreq.power * 1e3)
p_total_db = p_db + lin2db(pathreq.nb_channel)
build_network(network, equipment, p_db, p_total_db)
pathreq.nodes_list.append(pathreq.destination)
#we assume that the destination is a strict constraint
pathreq.loose_list.append('strict')
print(f'Computing path from {pathreq.source} to {pathreq.destination}')
print(f'with path constraint: {[pathreq.source]+pathreq.nodes_list}'
) #adding first node to be clearer on the output
total_path = compute_constrained_path(network, pathreq)
print(
f'Computed path (roadms):{[e.uid for e in total_path if isinstance(e, Roadm)]}\n'
)
if total_path:
total_path = propagate(total_path, pathreq, equipment, show=False)
else:
total_path = []
# we record the last tranceiver object in order to have th whole
# information about spectrum. Important Note: since transceivers
# attached to roadms are actually logical elements to simulate
# performance, several demands having the same destination may use
# the same transponder for the performance simaulation. This is why
# we use deepcopy: to ensure each propagation is recorded and not
# overwritten
path_res_list.append(deepcopy(total_path))
return path_res_list
def test_auto_design_generation_fromjson(tmpdir, json_input, power_mode):
"""test that autodesign creates same file as an input file already autodesigned
"""
equipment = load_equipment(eqpt_filename)
network = load_network(json_input, equipment)
# in order to test the Eqpt sheet and load gain target,
# change the power-mode to False (to be in gain mode)
equipment['Span']['default'].power_mode = power_mode
# Build the network once using the default power defined in SI in eqpt config
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
actual_json_output = tmpdir / json_input.with_name(
json_input.stem + '_auto_design').with_suffix('.json').name
save_network(network, actual_json_output)
actual = load_json(actual_json_output)
unlink(actual_json_output)
assert actual == load_json(json_input)
def test_roadm_target_power(prev_node_type, effective_pch_out_db):
''' Check that egress power of roadm is equal to target power if input power is greater
than target power else, that it is equal to input power. Use a simple two hops A-B-C topology
for the test where the prev_node in ROADM B is either an amplifier or a fused, so that the target
power can not be met in this last case.
'''
equipment = load_equipment(EQPT_LIBRARY_NAME)
json_network = load_json(TEST_DIR / 'data/twohops_roadm_power_test.json')
prev_node = next(n for n in json_network['elements']
if n['uid'] == 'west edfa in node B to ila2')
json_network['elements'].remove(prev_node)
if prev_node_type == 'edfa':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Edfa'}
elif prev_node_type == 'fused':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Fused'}
prev_node['params'] = {'loss': 0}
json_network['elements'].append(prev_node)
network = network_from_json(json_network, equipment)
# Build the network once using the default power defined in SI in eqpt config
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
params = {}
params['request_id'] = 0
params['trx_type'] = ''
params['trx_mode'] = ''
params['source'] = 'trx node A'
params['destination'] = 'trx node C'
params['bidir'] = False
params['nodes_list'] = ['trx node C']
params['loose_list'] = ['strict']
params['format'] = ''
params['path_bandwidth'] = 100e9
trx_params = trx_mode_params(equipment)
params.update(trx_params)
req = PathRequest(**params)
path = compute_constrained_path(network, req)
si = create_input_spectral_information(req.f_min, req.f_max, req.roll_off,
req.baud_rate, req.power,
req.spacing)
for i, el in enumerate(path):
if isinstance(el, Roadm):
carriers_power_in_roadm = min([
c.power.signal + c.power.nli + c.power.ase for c in si.carriers
])
si = el(si, degree=path[i + 1].uid)
if el.uid == 'roadm node B':
print('input', carriers_power_in_roadm)
assert el.effective_pch_out_db == effective_pch_out_db
for carrier in si.carriers:
print(carrier.power.signal + carrier.power.nli +
carrier.power.ase)
power = carrier.power.signal + carrier.power.nli + carrier.power.ase
if prev_node_type == 'edfa':
# edfa prev_node sets input power to roadm to a high enough value:
# Check that egress power of roadm is equal to target power
assert power == pytest.approx(
db2lin(effective_pch_out_db - 30), rel=1e-3)
elif prev_node_type == 'fused':
# fused prev_node does reamplfy power after fiber propagation, so input power
# to roadm is low.
# Check that egress power of roadm is equalized to the min carrier input power.
assert power == pytest.approx(carriers_power_in_roadm,
rel=1e-3)
else:
si = el(si)
def test_excel_ila_constraints(source, destination, route_list, hoptype,
expected_correction):
""" add different kind of constraints to test all correct_route cases
"""
service_xls_input = DATA_DIR / 'testTopology.xls'
network_json_input = DATA_DIR / 'testTopology_auto_design_expected.json'
equipment = load_equipment(eqpt_filename)
network = load_network(network_json_input, equipment)
# increase length of one span to trigger automatic fiber splitting included by autodesign
# so that the test also covers this case
next(node for node in network.nodes()
if node.uid == 'fiber (Brest_KLA → Quimper)-').length = 200000
next(node for node in network.nodes()
if node.uid == 'fiber (Quimper → Brest_KLA)-').length = 200000
default_si = equipment['SI']['default']
p_db = default_si.power_dbm
p_total_db = p_db + lin2db(
automatic_nch(default_si.f_min, default_si.f_max, default_si.spacing))
build_network(network, equipment, p_db, p_total_db)
# create params for a request based on input
nodes_list = route_list.split(' | ') if route_list is not None else []
params = {
'request_id':
'0',
'source':
source,
'bidir':
False,
'destination':
destination,
'trx_type':
'',
'trx_mode':
'',
'format':
'',
'spacing':
'',
'nodes_list':
nodes_list,
'loose_list':
[hoptype for node in nodes_list] if route_list is not None else '',
'f_min':
0,
'f_max':
0,
'baud_rate':
0,
'OSNR':
None,
'bit_rate':
None,
'cost':
None,
'roll_off':
0,
'tx_osnr':
0,
'min_spacing':
None,
'nb_channel':
0,
'power':
0,
'path_bandwidth':
0,
}
request = PathRequest(**params)
if expected_correction != 'Fail':
[request] = correct_xls_route_list(service_xls_input, network,
[request])
assert request.nodes_list == expected_correction
else:
with pytest.raises(ServiceError):
[request] = correct_xls_route_list(service_xls_input, network,
[request])
def test_json_response_generation(xls_input, expected_response_file):
""" tests if json response is correctly generated for all combinations of requests
"""
equipment = load_equipment(eqpt_filename)
network = load_network(xls_input, equipment)
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
data = read_service_sheet(xls_input, equipment, network)
# change one of the request with bidir option to cover bidir case as well
data['path-request'][2]['bidirectional'] = True
oms_list = build_oms_list(network, equipment)
rqs = requests_from_json(data, equipment)
dsjn = disjunctions_from_json(data)
dsjn = deduplicate_disjunctions(dsjn)
rqs, dsjn = requests_aggregation(rqs, dsjn)
pths = compute_path_dsjctn(network, equipment, rqs, dsjn)
propagatedpths, reversed_pths, reversed_propagatedpths = \
compute_path_with_disjunction(network, equipment, rqs, pths)
pth_assign_spectrum(pths, rqs, oms_list, reversed_pths)
result = []
for i, pth in enumerate(propagatedpths):
# test ServiceError handling : when M is zero at this point, the
# json result should not be created if there is no blocking reason
if i == 1:
my_rq = deepcopy(rqs[i])
my_rq.M = 0
with pytest.raises(ServiceError):
ResultElement(my_rq, pth, reversed_propagatedpths[i]).json
my_rq.blocking_reason = 'NO_SPECTRUM'
ResultElement(my_rq, pth, reversed_propagatedpths[i]).json
result.append(ResultElement(rqs[i], pth, reversed_propagatedpths[i]))
temp = {'response': [n.json for n in result]}
expected = load_json(expected_response_file)
for i, response in enumerate(temp['response']):
if i == 2:
# compare response must be False because z-a metric is missing
# (request with bidir option to cover bidir case)
assert not compare_response(expected['response'][i], response)
print(f'response {response["response-id"]} should not match')
expected['response'][2]['path-properties']['z-a-path-metric'] = [{
'metric-type':
'SNR-bandwidth',
'accumulative-value':
22.809999999999999
}, {
'metric-type':
'SNR-0.1nm',
'accumulative-value':
26.890000000000001
}, {
'metric-type':
'OSNR-bandwidth',
'accumulative-value':
26.239999999999998
}, {
'metric-type':
'OSNR-0.1nm',
'accumulative-value':
30.32
}, {
'metric-type':
'reference_power',
'accumulative-value':
0.0012589254117941673
}, {
'metric-type':
'path_bandwidth',
'accumulative-value':
60000000000.0
}]
# test should be OK now
else:
assert compare_response(expected['response'][i], response)
print(f'response {response["response-id"]} is not correct')
def main(network, equipment, source, destination, req=None):
result_dicts = {}
network_data = [{
'network_name': str(args.filename),
'source': source.uid,
'destination': destination.uid
}]
result_dicts.update({'network': network_data})
design_data = [{
'power_mode': equipment['Spans']['default'].power_mode,
'span_power_range': equipment['Spans']['default'].delta_power_range_db,
'design_pch': equipment['SI']['default'].power_dbm,
'baud_rate': equipment['SI']['default'].baud_rate
}]
result_dicts.update({'design': design_data})
simulation_data = []
result_dicts.update({'simulation results': simulation_data})
power_mode = equipment['Spans']['default'].power_mode
print('\n'.join([
f'Power mode is set to {power_mode}',
f'=> it can be modified in eqpt_config.json - Spans'
]))
pref_ch_db = lin2db(req.power *
1e3) #reference channel power / span (SL=20dB)
pref_total_db = pref_ch_db + lin2db(
req.nb_channel) #reference total power / span (SL=20dB)
build_network(network, equipment, pref_ch_db, pref_total_db)
path = compute_constrained_path(network, req)
spans = [s.length for s in path if isinstance(s, Fiber)]
print(
f'\nThere are {len(spans)} fiber spans over {sum(spans):.0f}m between {source.uid} and {destination.uid}'
)
print(f'\nNow propagating between {source.uid} and {destination.uid}:')
try:
power_range = list(arange(*equipment['SI']['default'].power_range_db))
last = equipment['SI']['default'].power_range_db[-2]
if len(power_range) == 0: #bad input that will lead to no simulation
power_range = [0] #better than an error message
else:
power_range.append(last)
except TypeError:
print(
'invalid power range definition in eqpt_config, should be power_range_db: [lower, upper, step]'
)
power_range = [0]
for dp_db in power_range:
req.power = db2lin(pref_ch_db + dp_db) * 1e-3
print(
f'\nPropagating with input power = {lin2db(req.power*1e3):.2f}dBm :'
)
propagate(path, req, equipment, show=len(power_range) == 1)
print(
f'\nTransmission result for input power = {lin2db(req.power*1e3):.2f}dBm :'
)
print(destination)
simulation_data.append({
'Pch_dBm':
pref_ch_db + dp_db,
'OSNR_ASE_0.1nm':
round(mean(destination.osnr_ase_01nm), 2),
'OSNR_ASE_signal_bw':
round(mean(destination.osnr_ase), 2),
'SNR_nli_signal_bw':
round(mean(destination.osnr_nli), 2),
'SNR_total_signal_bw':
round(mean(destination.snr), 2)
})
write_csv(result_dicts, 'simulation_result.csv')
return path
exit(1)
except NetworkTopologyError as e:
print(f'{ansi_escapes.red}Invalid network definition:{ansi_escapes.reset} {e}')
exit(1)
except ConfigurationError as e:
print(f'{ansi_escapes.red}Configuration error:{ansi_escapes.reset} {e}')
exit(1)
# Build the network once using the default power defined in SI in eqpt config
# TODO power density : db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(automatic_nch(equipment['SI']['default'].f_min,\
equipment['SI']['default'].f_max, equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
save_network(args.network_filename, network)
rqs = requests_from_json(data, equipment)
# check that request ids are unique. Non unique ids, may
# mess the computation : better to stop the computation
all_ids = [r.request_id for r in rqs]
if len(all_ids) != len(set(all_ids)):
for a in list(set(all_ids)):
all_ids.remove(a)
msg = f'Requests id {all_ids} are not unique'
logger.critical(msg)
exit()
rqs = correct_route_list(network, rqs)
def path_requests_run(args=None):
parser = argparse.ArgumentParser(
description=
'Compute performance for a list of services provided in a json file or an excel sheet',
epilog=_help_footer,
formatter_class=argparse.ArgumentDefaultsHelpFormatter,
)
_add_common_options(parser,
network_default=_examples_dir /
'meshTopologyExampleV2.xls')
parser.add_argument('service_filename',
nargs='?',
type=Path,
metavar='SERVICES-REQUESTS.(json|xls|xlsx)',
default=_examples_dir / 'meshTopologyExampleV2.xls',
help='Input service file')
parser.add_argument('-bi',
'--bidir',
action='store_true',
help='considers that all demands are bidir')
parser.add_argument(
'-o',
'--output',
type=Path,
metavar=_help_fname_json_csv,
help='Store satisifed requests into a JSON or CSV file')
args = parser.parse_args(args if args is not None else sys.argv[1:])
_setup_logging(args)
_logger.info(
f'Computing path requests {args.service_filename} into JSON format')
print(
f'{ansi_escapes.blue}Computing path requests {os.path.relpath(args.service_filename)} into JSON format{ansi_escapes.reset}'
)
(equipment,
network) = load_common_data(args.equipment, args.topology,
args.sim_params,
args.save_network_before_autodesign)
# Build the network once using the default power defined in SI in eqpt config
# TODO power density: db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
try:
build_network(network, equipment, p_db, p_total_db)
except exceptions.NetworkTopologyError as e:
print(
f'{ansi_escapes.red}Invalid network definition:{ansi_escapes.reset} {e}'
)
sys.exit(1)
except exceptions.ConfigurationError as e:
print(
f'{ansi_escapes.red}Configuration error:{ansi_escapes.reset} {e}')
sys.exit(1)
if args.save_network is not None:
save_network(network, args.save_network)
print(
f'{ansi_escapes.blue}Network (after autodesign) saved to {args.save_network}{ansi_escapes.reset}'
)
oms_list = build_oms_list(network, equipment)
try:
data = load_requests(args.service_filename,
equipment,
bidir=args.bidir,
network=network,
network_filename=args.topology)
rqs = requests_from_json(data, equipment)
except exceptions.ServiceError as e:
print(f'{ansi_escapes.red}Service error:{ansi_escapes.reset} {e}')
sys.exit(1)
# check that request ids are unique. Non unique ids, may
# mess the computation: better to stop the computation
all_ids = [r.request_id for r in rqs]
if len(all_ids) != len(set(all_ids)):
for item in list(set(all_ids)):
all_ids.remove(item)
msg = f'Requests id {all_ids} are not unique'
_logger.critical(msg)
sys.exit()
rqs = correct_json_route_list(network, rqs)
# pths = compute_path(network, equipment, rqs)
dsjn = disjunctions_from_json(data)
print(f'{ansi_escapes.blue}List of disjunctions{ansi_escapes.reset}')
print(dsjn)
# need to warn or correct in case of wrong disjunction form
# disjunction must not be repeated with same or different ids
dsjn = deduplicate_disjunctions(dsjn)
# Aggregate demands with same exact constraints
print(
f'{ansi_escapes.blue}Aggregating similar requests{ansi_escapes.reset}')
rqs, dsjn = requests_aggregation(rqs, dsjn)
# TODO export novel set of aggregated demands in a json file
print(
f'{ansi_escapes.blue}The following services have been requested:{ansi_escapes.reset}'
)
print(rqs)
print(
f'{ansi_escapes.blue}Computing all paths with constraints{ansi_escapes.reset}'
)
try:
pths = compute_path_dsjctn(network, equipment, rqs, dsjn)
except exceptions.DisjunctionError as this_e:
print(
f'{ansi_escapes.red}Disjunction error:{ansi_escapes.reset} {this_e}'
)
sys.exit(1)
print(
f'{ansi_escapes.blue}Propagating on selected path{ansi_escapes.reset}')
propagatedpths, reversed_pths, reversed_propagatedpths = compute_path_with_disjunction(
network, equipment, rqs, pths)
# Note that deepcopy used in compute_path_with_disjunction returns
# a list of nodes which are not belonging to network (they are copies of the node objects).
# so there can not be propagation on these nodes.
pth_assign_spectrum(pths, rqs, oms_list, reversed_pths)
print(f'{ansi_escapes.blue}Result summary{ansi_escapes.reset}')
header = [
'req id', ' demand', ' snr@bandwidth A-Z (Z-A)',
' [email protected] A-Z (Z-A)', ' Receiver minOSNR', ' mode', ' Gbit/s',
' nb of tsp pairs', 'N,M or blocking reason'
]
data = []
data.append(header)
for i, this_p in enumerate(propagatedpths):
rev_pth = reversed_propagatedpths[i]
if rev_pth and this_p:
psnrb = f'{round(mean(this_p[-1].snr),2)} ({round(mean(rev_pth[-1].snr),2)})'
psnr = f'{round(mean(this_p[-1].snr_01nm), 2)}' +\
f' ({round(mean(rev_pth[-1].snr_01nm),2)})'
elif this_p:
psnrb = f'{round(mean(this_p[-1].snr),2)}'
psnr = f'{round(mean(this_p[-1].snr_01nm),2)}'
try:
if rqs[i].blocking_reason in BLOCKING_NOPATH:
line = [
f'{rqs[i].request_id}',
f' {rqs[i].source} to {rqs[i].destination} :', f'-', f'-',
f'-', f'{rqs[i].tsp_mode}',
f'{round(rqs[i].path_bandwidth * 1e-9,2)}', f'-',
f'{rqs[i].blocking_reason}'
]
else:
line = [
f'{rqs[i].request_id}',
f' {rqs[i].source} to {rqs[i].destination} : ', psnrb,
psnr, f'-', f'{rqs[i].tsp_mode}',
f'{round(rqs[i].path_bandwidth * 1e-9, 2)}', f'-',
f'{rqs[i].blocking_reason}'
]
except AttributeError:
line = [
f'{rqs[i].request_id}',
f' {rqs[i].source} to {rqs[i].destination} : ', psnrb, psnr,
f'{rqs[i].OSNR + equipment["SI"]["default"].sys_margins}',
f'{rqs[i].tsp_mode}',
f'{round(rqs[i].path_bandwidth * 1e-9,2)}',
f'{ceil(rqs[i].path_bandwidth / rqs[i].bit_rate) }',
f'({rqs[i].N},{rqs[i].M})'
]
data.append(line)
col_width = max(len(word) for row in data for word in row[2:]) # padding
firstcol_width = max(len(row[0]) for row in data) # padding
secondcol_width = max(len(row[1]) for row in data) # padding
for row in data:
firstcol = ''.join(row[0].ljust(firstcol_width))
secondcol = ''.join(row[1].ljust(secondcol_width))
remainingcols = ''.join(
word.center(col_width, ' ') for word in row[2:])
print(f'{firstcol} {secondcol} {remainingcols}')
print(
f'{ansi_escapes.yellow}Result summary shows mean SNR and OSNR (average over all channels){ansi_escapes.reset}'
)
if args.output:
result = []
# assumes that list of rqs and list of propgatedpths have same order
for i, pth in enumerate(propagatedpths):
result.append(
ResultElement(rqs[i], pth, reversed_propagatedpths[i]))
temp = _path_result_json(result)
if args.output.suffix.lower() == '.json':
save_json(temp, args.output)
print(
f'{ansi_escapes.blue}Saved JSON to {args.output}{ansi_escapes.reset}'
)
elif args.output.suffix.lower() == '.csv':
with open(args.output, "w", encoding='utf-8') as fcsv:
jsontocsv(temp, equipment, fcsv)
print(
f'{ansi_escapes.blue}Saved CSV to {args.output}{ansi_escapes.reset}'
)
else:
print(
f'{ansi_escapes.red}Cannot save output: neither JSON nor CSV file{ansi_escapes.reset}'
)
sys.exit(1)
def transmission_main_example(args=None):
parser = argparse.ArgumentParser(
description=
'Send a full spectrum load through the network from point A to point B',
epilog=_help_footer,
formatter_class=argparse.ArgumentDefaultsHelpFormatter,
)
_add_common_options(parser,
network_default=_examples_dir /
'edfa_example_network.json')
parser.add_argument('--show-channels',
action='store_true',
help='Show final per-channel OSNR summary')
parser.add_argument('-pl', '--plot', action='store_true')
parser.add_argument('-l',
'--list-nodes',
action='store_true',
help='list all transceiver nodes')
parser.add_argument('-po',
'--power',
default=0,
help='channel ref power in dBm')
parser.add_argument('source', nargs='?', help='source node')
parser.add_argument('destination', nargs='?', help='destination node')
args = parser.parse_args(args if args is not None else sys.argv[1:])
_setup_logging(args)
(equipment,
network) = load_common_data(args.equipment, args.topology,
args.sim_params,
args.save_network_before_autodesign)
if args.plot:
plot_baseline(network)
transceivers = {
n.uid: n
for n in network.nodes() if isinstance(n, Transceiver)
}
if not transceivers:
sys.exit('Network has no transceivers!')
if len(transceivers) < 2:
sys.exit('Network has only one transceiver!')
if args.list_nodes:
for uid in transceivers:
print(uid)
sys.exit()
# First try to find exact match if source/destination provided
if args.source:
source = transceivers.pop(args.source, None)
valid_source = True if source else False
else:
source = None
_logger.info('No source node specified: picking random transceiver')
if args.destination:
destination = transceivers.pop(args.destination, None)
valid_destination = True if destination else False
else:
destination = None
_logger.info(
'No destination node specified: picking random transceiver')
# If no exact match try to find partial match
if args.source and not source:
# TODO code a more advanced regex to find nodes match
source = next(
(transceivers.pop(uid)
for uid in transceivers if args.source.lower() in uid.lower()),
None)
if args.destination and not destination:
# TODO code a more advanced regex to find nodes match
destination = next((transceivers.pop(uid) for uid in transceivers
if args.destination.lower() in uid.lower()), None)
# If no partial match or no source/destination provided pick random
if not source:
source = list(transceivers.values())[0]
del transceivers[source.uid]
if not destination:
destination = list(transceivers.values())[0]
_logger.info(f'source = {args.source!r}')
_logger.info(f'destination = {args.destination!r}')
params = {}
params['request_id'] = 0
params['trx_type'] = ''
params['trx_mode'] = ''
params['source'] = source.uid
params['destination'] = destination.uid
params['bidir'] = False
params['nodes_list'] = [destination.uid]
params['loose_list'] = ['strict']
params['format'] = ''
params['path_bandwidth'] = 0
trx_params = trx_mode_params(equipment)
# Randomly generate input power
input_power = round(random.random(), 2)
input_power = -2 + (input_power * (8))
args.power = input_power
if args.power:
trx_params['power'] = db2lin(float(args.power)) * 1e-3
params.update(trx_params)
req = PathRequest(**params)
power_mode = equipment['Span']['default'].power_mode
print('\n'.join([
f'Power mode is set to {power_mode}',
f'=> it can be modified in eqpt_config.json - Span'
]))
pref_ch_db = lin2db(req.power *
1e3) # reference channel power / span (SL=20dB)
pref_total_db = pref_ch_db + lin2db(
req.nb_channel) # reference total power / span (SL=20dB)
try:
build_network(network, equipment, pref_ch_db, pref_total_db)
except exceptions.NetworkTopologyError as e:
print(
f'{ansi_escapes.red}Invalid network definition:{ansi_escapes.reset} {e}'
)
sys.exit(1)
except exceptions.ConfigurationError as e:
print(
f'{ansi_escapes.red}Configuration error:{ansi_escapes.reset} {e}')
sys.exit(1)
path = compute_constrained_path(network, req)
spans = [
s.params.length for s in path
if isinstance(s, RamanFiber) or isinstance(s, Fiber)
]
print(
f'\nThere are {len(spans)} fiber spans over {sum(spans)/1000:.0f} km between {source.uid} '
f'and {destination.uid}')
print(f'\nNow propagating between {source.uid} and {destination.uid}:')
try:
p_start, p_stop, p_step = equipment['SI']['default'].power_range_db
p_num = abs(int(round(
(p_stop - p_start) / p_step))) + 1 if p_step != 0 else 1
power_range = list(linspace(p_start, p_stop, p_num))
except TypeError:
print(
'invalid power range definition in eqpt_config, should be power_range_db: [lower, upper, step]'
)
power_range = [0]
if not power_mode:
# power cannot be changed in gain mode
power_range = [0]
for dp_db in power_range:
req.power = db2lin(pref_ch_db + dp_db) * 1e-3
if power_mode:
print(
f'\nPropagating with input power = {ansi_escapes.cyan}{lin2db(req.power*1e3):.2f} dBm{ansi_escapes.reset}:'
)
else:
print(
f'\nPropagating in {ansi_escapes.cyan}gain mode{ansi_escapes.reset}: power cannot be set manually'
)
infos = propagate(path, req, equipment)
if len(power_range) == 1:
for elem in path:
print(elem)
if power_mode:
print(
f'\nTransmission result for input power = {lin2db(req.power*1e3):.2f} dBm:'
)
else:
print(f'\nTransmission results:')
# print('-------------')
# print(destination.snr_01nm)
# print('-------------')
print(
f' Final SNR total (0.1 nm): {ansi_escapes.cyan}{mean(destination.snr_01nm):.02f} dB{ansi_escapes.reset}'
)
else:
print(path[-1])
if args.save_network is not None:
save_network(network, args.save_network)
print(
f'{ansi_escapes.blue}Network (after autodesign) saved to {args.save_network}{ansi_escapes.reset}'
)
if args.show_channels:
print('\nThe total SNR per channel at the end of the line is:')
print('{:>5}{:>26}{:>26}{:>28}{:>28}{:>28}'.format(
'Ch. #', 'Channel frequency (THz)', 'Channel power (dBm)',
'OSNR ASE (signal bw, dB)', 'SNR NLI (signal bw, dB)',
'SNR total (signal bw, dB)'))
# print(dir(info))
for final_carrier, ch_osnr, ch_snr_nl, ch_snr in zip(
infos.carriers, path[-1].osnr_ase, path[-1].osnr_nli,
path[-1].snr):
ch_freq = final_carrier.frequency * 1e-12
ch_power = lin2db(final_carrier.power.signal * 1e3)
print('{:5}{:26.2f}{:26.2f}{:28.2f}{:28.2f}{:28.2f}'.format(
final_carrier.channel_number, round(ch_freq, 2),
round(ch_power, 2), round(ch_osnr, 2), round(ch_snr_nl, 2),
round(ch_snr, 2)))
if not args.source:
print(f'\n(No source node specified: picked {source.uid})')
elif not valid_source:
print(
f'\n(Invalid source node {args.source!r} replaced with {source.uid})'
)
if not args.destination:
print(f'\n(No destination node specified: picked {destination.uid})')
elif not valid_destination:
print(
f'\n(Invalid destination node {args.destination!r} replaced with {destination.uid})'
)
if args.plot:
plot_results(network, path, source, destination)
# MY ADDITION
# just to see what the different contributions of ASE and NLI are
# return input_power, path[-1].osnr_ase, path[-1].osnr_nli, path[-1].snr
# to test Raman
return input_power, destination.snr_01nm, mean(destination.snr_01nm)
def test_restrictions(restrictions, equipment):
''' test that restriction is correctly applied if provided in eqpt_config and if no Edfa type
were provided in the network json
'''
# add restrictions
equipment['Roadm']['default'].restrictions = restrictions
# build network
json_network = load_json(NETWORK_FILE_NAME)
network = network_from_json(json_network, equipment)
amp_nodes_nobuild_uid = [nd.uid for nd in network.nodes() \
if isinstance(nd, Edfa) and isinstance(next(network.predecessors(nd)), Roadm)]
preamp_nodes_nobuild_uid = [nd.uid for nd in network.nodes() \
if isinstance(nd, Edfa) and isinstance(next(network.successors(nd)), Roadm)]
amp_nodes_nobuild = {nd.uid : nd for nd in network.nodes() \
if isinstance(nd, Edfa) and isinstance(next(network.predecessors(nd)), Roadm)}
preamp_nodes_nobuild = {nd.uid : nd for nd in network.nodes() \
if isinstance(nd, Edfa) and isinstance(next(network.successors(nd)), Roadm)}
# roadm dict with restrictions before build
roadms = {nd.uid: nd for nd in network.nodes() if isinstance(nd, Roadm)}
# Build the network once using the default power defined in SI in eqpt config
# power density : db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(automatic_nch(equipment['SI']['default'].f_min,\
equipment['SI']['default'].f_max, equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
amp_nodes = [nd for nd in network.nodes() \
if isinstance(nd, Edfa) and isinstance(next(network.predecessors(nd)), Roadm)\
and next(network.predecessors(nd)).restrictions['booster_variety_list']]
preamp_nodes = [nd for nd in network.nodes() \
if isinstance(nd, Edfa) and isinstance(next(network.successors(nd)), Roadm)\
and next(network.successors(nd)).restrictions['preamp_variety_list']]
# check that previously existing amp are not changed
for amp in amp_nodes:
if amp.uid in amp_nodes_nobuild_uid:
print(amp.uid, amp.params.type_variety)
if not amp.params.type_variety == amp_nodes_nobuild[
amp.uid].params.type_variety:
raise AssertionError()
for amp in preamp_nodes:
if amp.uid in preamp_nodes_nobuild_uid:
if not amp.params.type_variety == preamp_nodes_nobuild[
amp.uid].params.type_variety:
raise AssertionError()
# check that restrictions are correctly applied
for amp in amp_nodes:
if amp.uid not in amp_nodes_nobuild_uid:
# and if roadm had no restrictions before build:
if restrictions['booster_variety_list'] and \
not roadms[next(network.predecessors(amp)).uid]\
.restrictions['booster_variety_list']:
if not amp.params.type_variety in restrictions[
'booster_variety_list']:
raise AssertionError()
for amp in preamp_nodes:
if amp.uid not in preamp_nodes_nobuild_uid:
if restrictions['preamp_variety_list'] and\
not roadms[next(network.successors(amp)).uid].restrictions['preamp_variety_list']:
if not amp.params.type_variety in restrictions[
'preamp_variety_list']:
raise AssertionError()
def main(args):
""" main function that calls all functions
"""
LOGGER.info(
f'Computing path requests {args.service_filename} into JSON format')
print('\x1b[1;34;40m' +\
f'Computing path requests {args.service_filename} into JSON format'+ '\x1b[0m')
# for debug
# print( args.eqpt_filename)
try:
data = load_requests(args.service_filename, args.eqpt_filename,
args.bidir)
equipment = load_equipment(args.eqpt_filename)
network = load_network(args.network_filename, equipment)
except EquipmentConfigError as this_e:
print(
f'{ansi_escapes.red}Configuration error in the equipment library:{ansi_escapes.reset} {this_e}'
)
exit(1)
except NetworkTopologyError as this_e:
print(
f'{ansi_escapes.red}Invalid network definition:{ansi_escapes.reset} {this_e}'
)
exit(1)
except ConfigurationError as this_e:
print(
f'{ansi_escapes.red}Configuration error:{ansi_escapes.reset} {this_e}'
)
exit(1)
except ServiceError as this_e:
print(f'{ansi_escapes.red}Service error:{ansi_escapes.reset} {this_e}')
exit(1)
# Build the network once using the default power defined in SI in eqpt config
# TODO power density: db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(automatic_nch(equipment['SI']['default'].f_min,\
equipment['SI']['default'].f_max, equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
save_network(args.network_filename, network)
oms_list = build_oms_list(network, equipment)
try:
rqs = requests_from_json(data, equipment)
except ServiceError as this_e:
print(f'{ansi_escapes.red}Service error:{ansi_escapes.reset} {this_e}')
exit(1)
# check that request ids are unique. Non unique ids, may
# mess the computation: better to stop the computation
all_ids = [r.request_id for r in rqs]
if len(all_ids) != len(set(all_ids)):
for item in list(set(all_ids)):
all_ids.remove(item)
msg = f'Requests id {all_ids} are not unique'
LOGGER.critical(msg)
exit()
try:
rqs = correct_route_list(network, rqs)
except ServiceError as this_e:
print(f'{ansi_escapes.red}Service error:{ansi_escapes.reset} {this_e}')
exit(1)
# pths = compute_path(network, equipment, rqs)
dsjn = disjunctions_from_json(data)
print('\x1b[1;34;40m' + f'List of disjunctions' + '\x1b[0m')
print(dsjn)
# need to warn or correct in case of wrong disjunction form
# disjunction must not be repeated with same or different ids
dsjn = correct_disjn(dsjn)
# Aggregate demands with same exact constraints
print('\x1b[1;34;40m' + f'Aggregating similar requests' + '\x1b[0m')
rqs, dsjn = requests_aggregation(rqs, dsjn)
# TODO export novel set of aggregated demands in a json file
print('\x1b[1;34;40m' + 'The following services have been requested:' +
'\x1b[0m')
print(rqs)
print('\x1b[1;34;40m' + f'Computing all paths with constraints' +
'\x1b[0m')
try:
pths = compute_path_dsjctn(network, equipment, rqs, dsjn)
except DisjunctionError as this_e:
print(
f'{ansi_escapes.red}Disjunction error:{ansi_escapes.reset} {this_e}'
)
exit(1)
print('\x1b[1;34;40m' + f'Propagating on selected path' + '\x1b[0m')
propagatedpths, reversed_pths, reversed_propagatedpths = \
compute_path_with_disjunction(network, equipment, rqs, pths)
# Note that deepcopy used in compute_path_with_disjunction returns
# a list of nodes which are not belonging to network (they are copies of the node objects).
# so there can not be propagation on these nodes.
pth_assign_spectrum(pths, rqs, oms_list, reversed_pths)
print('\x1b[1;34;40m' + f'Result summary' + '\x1b[0m')
header = ['req id', ' demand', ' snr@bandwidth A-Z (Z-A)', ' [email protected] A-Z (Z-A)',\
' Receiver minOSNR', ' mode', ' Gbit/s', ' nb of tsp pairs',\
'N,M or blocking reason']
data = []
data.append(header)
for i, this_p in enumerate(propagatedpths):
rev_pth = reversed_propagatedpths[i]
if rev_pth and this_p:
psnrb = f'{round(mean(this_p[-1].snr),2)} ({round(mean(rev_pth[-1].snr),2)})'
psnr = f'{round(mean(this_p[-1].snr_01nm), 2)}' +\
f' ({round(mean(rev_pth[-1].snr_01nm),2)})'
elif this_p:
psnrb = f'{round(mean(this_p[-1].snr),2)}'
psnr = f'{round(mean(this_p[-1].snr_01nm),2)}'
try:
if rqs[i].blocking_reason in BLOCKING_NOPATH:
line = [f'{rqs[i].request_id}', f' {rqs[i].source} to {rqs[i].destination} :',\
f'-', f'-', f'-', f'{rqs[i].tsp_mode}', f'{round(rqs[i].path_bandwidth * 1e-9,2)}',\
f'-', f'{rqs[i].blocking_reason}']
else:
line = [f'{rqs[i].request_id}', f' {rqs[i].source} to {rqs[i].destination} : ', psnrb,\
psnr, f'-', f'{rqs[i].tsp_mode}', f'{round(rqs[i].path_bandwidth * 1e-9, 2)}',\
f'-', f'{rqs[i].blocking_reason}']
except AttributeError:
line = [f'{rqs[i].request_id}', f' {rqs[i].source} to {rqs[i].destination} : ', psnrb,\
psnr, f'{rqs[i].OSNR}', f'{rqs[i].tsp_mode}', f'{round(rqs[i].path_bandwidth * 1e-9,2)}',\
f'{ceil(rqs[i].path_bandwidth / rqs[i].bit_rate) }', f'({rqs[i].N},{rqs[i].M})']
data.append(line)
col_width = max(len(word) for row in data for word in row[2:]) # padding
firstcol_width = max(len(row[0]) for row in data) # padding
secondcol_width = max(len(row[1]) for row in data) # padding
for row in data:
firstcol = ''.join(row[0].ljust(firstcol_width))
secondcol = ''.join(row[1].ljust(secondcol_width))
remainingcols = ''.join(
word.center(col_width, ' ') for word in row[2:])
print(f'{firstcol} {secondcol} {remainingcols}')
print('\x1b[1;33;40m'+f'Result summary shows mean SNR and OSNR (average over all channels)' +\
'\x1b[0m')
if args.output:
result = []
# assumes that list of rqs and list of propgatedpths have same order
for i, pth in enumerate(propagatedpths):
result.append(
Result_element(rqs[i], pth, reversed_propagatedpths[i]))
temp = path_result_json(result)
fnamecsv = f'{str(args.output)[0:len(str(args.output))-len(str(args.output.suffix))]}.csv'
fnamejson = f'{str(args.output)[0:len(str(args.output))-len(str(args.output.suffix))]}.json'
with open(fnamejson, 'w', encoding='utf-8') as fjson:
fjson.write(
dumps(path_result_json(result), indent=2, ensure_ascii=False))
with open(fnamecsv, "w", encoding='utf-8') as fcsv:
jsontocsv(temp, equipment, fcsv)
print('\x1b[1;34;40m' +
f'saving in {args.output} and {fnamecsv}' + '\x1b[0m')
def test_roadm_target_power(prev_node_type, effective_pch_out_db, power_dbm):
''' Check that egress power of roadm is equal to target power if input power is greater
than target power else, that it is equal to input power. Use a simple two hops A-B-C topology
for the test where the prev_node in ROADM B is either an amplifier or a fused, so that the target
power can not be met in this last case.
'''
equipment = load_equipment(EQPT_LIBRARY_NAME)
json_network = load_json(TEST_DIR / 'data/twohops_roadm_power_test.json')
prev_node = next(n for n in json_network['elements']
if n['uid'] == 'west edfa in node B to ila2')
json_network['elements'].remove(prev_node)
if prev_node_type == 'edfa':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Edfa'}
elif prev_node_type == 'fused':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Fused'}
prev_node['params'] = {'loss': 0}
json_network['elements'].append(prev_node)
network = network_from_json(json_network, equipment)
p_total_db = power_dbm + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, power_dbm, p_total_db)
params = {
'request_id': 0,
'trx_type': '',
'trx_mode': '',
'source': 'trx node A',
'destination': 'trx node C',
'bidir': False,
'nodes_list': ['trx node C'],
'loose_list': ['strict'],
'format': '',
'path_bandwidth': 100e9,
'effective_freq_slot': None,
}
trx_params = trx_mode_params(equipment)
params.update(trx_params)
req = PathRequest(**params)
req.power = db2lin(power_dbm - 30)
path = compute_constrained_path(network, req)
si = create_input_spectral_information(req.f_min, req.f_max, req.roll_off,
req.baud_rate, req.power,
req.spacing)
for i, el in enumerate(path):
if isinstance(el, Roadm):
carriers_power_in_roadm = min([
c.power.signal + c.power.nli + c.power.ase for c in si.carriers
])
si = el(si, degree=path[i + 1].uid)
if el.uid == 'roadm node B':
print('input', carriers_power_in_roadm)
# if previous was an EDFA, power level at ROADM input is enough for the ROADM to apply its
# target power (as specified in equipment ie -20 dBm)
# if it is a Fused, the input power to the ROADM is smaller than the target power, and the
# ROADM cannot apply this target. In this case, it is assumed that the ROADM has 0 dB loss
# so the output power will be the same as the input power, which for this particular case
# corresponds to -22dBm + power_dbm
# next step (for ROADM modelling) will be to apply a minimum loss for ROADMs !
if prev_node_type == 'edfa':
assert el.effective_pch_out_db == effective_pch_out_db
if prev_node_type == 'fused':
# then output power == input_power == effective_pch_out_db + power_dbm
assert effective_pch_out_db + power_dbm == \
pytest.approx(lin2db(carriers_power_in_roadm * 1e3), rel=1e-3)
assert el.effective_pch_out_db == effective_pch_out_db + power_dbm
for carrier in si.carriers:
print(carrier.power.signal + carrier.power.nli +
carrier.power.ase)
power = carrier.power.signal + carrier.power.nli + carrier.power.ase
if prev_node_type == 'edfa':
# edfa prev_node sets input power to roadm to a high enough value:
# Check that egress power of roadm is equal to target power
assert power == pytest.approx(
db2lin(effective_pch_out_db - 30), rel=1e-3)
elif prev_node_type == 'fused':
# fused prev_node does reamplfy power after fiber propagation, so input power
# to roadm is low.
# Check that egress power of roadm is equalized to the min carrier input power.
assert power == pytest.approx(carriers_power_in_roadm,
rel=1e-3)
else:
si = el(si)
