def __init__(self, channel_rate, auto_tune_msgq=None):
gr.hier_block2.__init__(self, "op25_fsk4",
gr.io_signature(1, 1, gr.sizeof_float),
gr.io_signature(1, 1, gr.sizeof_float))
self.symbol_rate = SYMBOL_RATE
#print "Channel rate:", channel_rate
self.channel_rate = channel_rate
self.auto_tune_msgq = auto_tune_msgq
if self.auto_tune_msgq is None:
self.auto_tune_msgq = gr.msg_queue(2)
# C4FM demodulator
#print "Symbol rate:", self.symbol_rate
try:
self.demod_fsk4 = _op25.fsk4_demod_ff(self.auto_tune_msgq, self.channel_rate, self.symbol_rate)
if _verbose:
print "Using new fsk4_demod_ff"
except:
try:
self.demod_fsk4 = fsk4.demod_ff(self.auto_tune_msgq, self.channel_rate, self.symbol_rate) # LEGACY
if _verbose:
print "Using legacy fsk4.demod_ff"
except:
raise Exception("Could not find a FSK4 demodulator to use")
self.connect(self, self.demod_fsk4, self)
def __init__(self, channel_rate, auto_tune_msgq=None):
gr.hier_block2.__init__(self, "op25_fsk4",
gr.io_signature(1, 1, gr.sizeof_float),
gr.io_signature(1, 1, gr.sizeof_float))
self.symbol_rate = SYMBOL_RATE
#print "Channel rate:", channel_rate
self.channel_rate = channel_rate
self.auto_tune_msgq = auto_tune_msgq
if self.auto_tune_msgq is None:
self.auto_tune_msgq = gr.msg_queue(2)
# C4FM demodulator
#print "Symbol rate:", self.symbol_rate
try:
self.demod_fsk4 = _op25.fsk4_demod_ff(self.auto_tune_msgq,
self.channel_rate,
self.symbol_rate)
if _verbose:
print "Using new fsk4_demod_ff"
except:
try:
self.demod_fsk4 = fsk4.demod_ff(self.auto_tune_msgq,
self.channel_rate,
self.symbol_rate) # LEGACY
if _verbose:
print "Using legacy fsk4.demod_ff"
except:
raise Exception("Could not find a FSK4 demodulator to use")
self.connect(self, self.demod_fsk4, self)
def __init__(self, sps, channel_decim, channel_taps, options, usrp_rate,
channel_rate, lo_freq):
gr.hier_block2.__init__(self, "rx_channel_fm",
gr.io_signature(1, 1, gr.sizeof_gr_complex),
gr.io_signature(1, 1, gr.sizeof_float))
chan = gr.freq_xlating_fir_filter_ccf(int(channel_decim), channel_taps,
lo_freq, usrp_rate)
symbol_decim = 1
symbol_rate = 4800
self.symbol_deviation = 600.0
fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
symbol_coeffs = gr.firdes_root_raised_cosine(1.0, channel_rate,
symbol_rate, 1.0, 51)
symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
# C4FM demodulator
autotuneq = gr.msg_queue(2)
demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate, symbol_rate)
self.connect(self, chan, fm_demod, symbol_filter, demod_fsk4, self)
def __init__(self):
gr.top_block.__init__(self)
parser = OptionParser(option_class=eng_option)
parser.add_option("-a", "--audio-input", type="string", default="")
parser.add_option("-A", "--audio-output", type="string", default="")
parser.add_option("-f", "--factor", type="eng_float", default=1)
parser.add_option("-i", "--do-interp", action="store_true", default=False, help="enable output interpolator")
parser.add_option("-s", "--sample-rate", type="int", default=48000, help="input sample rate")
parser.add_option("-S", "--stretch", type="int", default=0, help="flex amt")
parser.add_option("-y", "--symbol-rate", type="int", default=4800, help="input symbol rate")
parser.add_option("-v", "--verbose", action="store_true", default=False, help="dump demodulation data")
(options, args) = parser.parse_args()
sample_rate = options.sample_rate
symbol_rate = options.symbol_rate
IN = audio.source(sample_rate, options.audio_input)
audio_output_rate = 8000
if options.do_interp:
audio_output_rate = 48000
OUT = audio.sink(audio_output_rate, options.audio_output)
symbol_decim = 1
symbol_coeffs = gr.firdes.root_raised_cosine(1.0, # gain
sample_rate , # sampling rate
symbol_rate, # symbol rate
0.2, # width of trans. band
500) # filter type
SYMBOL_FILTER = gr.fir_filter_fff (symbol_decim, symbol_coeffs)
AMP = gr.multiply_const_ff(options.factor)
msgq = gr.msg_queue(2)
FSK4 = op25.fsk4_demod_ff(msgq, sample_rate, symbol_rate)
levels = levels = [-2.0, 0.0, 2.0, 4.0]
SLICER = repeater.fsk4_slicer_fb(levels)
framer_msgq = gr.msg_queue(2)
DECODE = repeater.p25_frame_assembler('', # udp hostname
0, # udp port no.
options.verbose, #debug
True, # do_imbe
True, # do_output
False, # do_msgq
framer_msgq)
IMBE = repeater.vocoder(False, # 0=Decode,True=Encode
options.verbose, # Verbose flag
options.stretch, # flex amount
"", # udp ip address
0, # udp port
False) # dump raw u vectors
CVT = gr.short_to_float()
if options.do_interp:
interp_taps = gr.firdes.low_pass(1.0, 48000, 4000, 4000 * 0.1, gr.firdes.WIN_HANN)
INTERP = gr.interp_fir_filter_fff(48000 // 8000, interp_taps)
AMP2 = gr.multiply_const_ff(1.0 / 32767.0)
self.connect(IN, AMP, SYMBOL_FILTER, FSK4, SLICER, DECODE, IMBE, CVT, AMP2)
if options.do_interp:
self.connect(AMP2, INTERP, OUT)
else:
self.connect(AMP2, OUT)
def __build_graph(self, source, capture_rate):
# tell the scope the source rate
self.spectrum.set_sample_rate(capture_rate)
# channel filter
self.channel_offset = 0.0
channel_decim = capture_rate // self.channel_rate
channel_rate = capture_rate // channel_decim
trans_width = 12.5e3 / 2
trans_centre = trans_width + (trans_width / 2)
# discriminator tap doesn't do freq. xlation, FM demodulation, etc.
if not self.baseband_input:
coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre,
trans_width, gr.firdes.WIN_HANN)
self.channel_filter = gr.freq_xlating_fir_filter_ccf(
channel_decim, coeffs, 0.0, capture_rate)
self.set_channel_offset(0.0, 0, self.spectrum.win._units)
# power squelch
squelch_db = 0
self.squelch = gr.pwr_squelch_cc(squelch_db, 1e-3, 0, True)
self.set_squelch_threshold(squelch_db)
# FM demodulator
fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
# symbol filter
symbol_decim = 1
#symbol_coeffs = gr.firdes.root_raised_cosine(1.0, channel_rate, self.symbol_rate, 0.2, 500)
# boxcar coefficients for "integrate and dump" filter
samples_per_symbol = channel_rate // self.symbol_rate
symbol_coeffs = (1.0 / samples_per_symbol, ) * samples_per_symbol
self.symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
# C4FM demodulator
autotuneq = gr.msg_queue(2)
demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate,
self.symbol_rate)
# for now no audio output
sink = gr.null_sink(gr.sizeof_float)
# connect it all up
if self.baseband_input:
self.rescaler = gr.multiply_const_ff(1)
sinkx = gr.file_sink(gr.sizeof_float, "rx.dat")
self.__connect([[
source, self.rescaler, self.symbol_filter, demod_fsk4,
self.slicer, self.p25_decoder, sink
], [self.symbol_filter, self.signal_scope], [demod_fsk4, sinkx],
[demod_fsk4, self.symbol_scope]])
self.connect_data_scope(not self.datascope_raw_input)
else:
self.demod_watcher = demod_watcher(autotuneq,
self.adjust_channel_offset)
self.__connect([[
source, self.channel_filter, self.squelch, fm_demod,
self.symbol_filter, demod_fsk4, self.slicer, self.p25_decoder,
sink
], [source, self.spectrum],
[self.symbol_filter, self.signal_scope],
[demod_fsk4, self.symbol_scope]])
def __build_graph(self, source, capture_rate):
# tell the scope the source rate
self.spectrum.set_sample_rate(capture_rate)
# channel filter
self.channel_offset = 0.0
channel_decim = capture_rate // self.channel_rate
channel_rate = capture_rate // channel_decim
trans_width = 12.5e3 / 2
trans_centre = trans_width + (trans_width / 2)
coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre,
trans_width, gr.firdes.WIN_HANN)
self.channel_filter = gr.freq_xlating_fir_filter_ccf(
channel_decim, coeffs, 0.0, capture_rate)
self.set_channel_offset(0.0, 0, self.spectrum.win._units)
# power squelch
squelch_db = 0
self.squelch = gr.pwr_squelch_cc(squelch_db, 1e-3, 0, True)
self.set_squelch_threshold(squelch_db)
# FM demodulator
fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
# symbol filter
symbol_decim = 1
# symbol_coeffs = gr.firdes.root_raised_cosine(1.0, channel_rate, self.symbol_rate, 0.2, 500)
# boxcar coefficients for "integrate and dump" filter
samples_per_symbol = channel_rate // self.symbol_rate
symbol_coeffs = (1.0 / samples_per_symbol, ) * samples_per_symbol
symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
# C4FM demodulator
autotuneq = gr.msg_queue(2)
self.demod_watcher = demod_watcher(autotuneq,
self.adjust_channel_offset)
demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate,
self.symbol_rate)
# symbol slicer
levels = [-2.0, 0.0, 2.0, 4.0]
slicer = op25.fsk4_slicer_fb(levels)
# ALSA output device (if not locked)
try:
sink = audio.sink(8000, "plughw:0,0",
True) # ToDo: get actual device from prefs
except Exception:
sink = gr.null_sink(gr.sizeof_float)
# connect it all up
self.__connect([[
source, self.channel_filter, self.squelch, fm_demod, symbol_filter,
demod_fsk4, slicer, self.p25_decoder, sink
], [source, self.spectrum], [symbol_filter, self.signal_scope],
[demod_fsk4, self.symbol_scope]])
def __build_graph(self, source, capture_rate):
# tell the scope the source rate
self.spectrum.set_sample_rate(capture_rate)
# channel filter
self.channel_offset = 0.0
channel_decim = capture_rate // self.channel_rate
channel_rate = capture_rate // channel_decim
trans_width = 12.5e3 / 2;
trans_centre = trans_width + (trans_width / 2)
coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre, trans_width, gr.firdes.WIN_HANN)
self.channel_filter = gr.freq_xlating_fir_filter_ccf(channel_decim, coeffs, 0.0, capture_rate)
self.set_channel_offset(0.0)
# power squelch
squelch_db = 0
self.squelch = gr.pwr_squelch_cc(squelch_db, 1e-3, 0, True)
self.set_squelch_threshold(squelch_db)
# FM demodulator
fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
# symbol filter
symbol_decim = 1
# symbol_coeffs = gr.firdes.root_raised_cosine(1.0, channel_rate, self.symbol_rate, 0.2, 500)
# boxcar coefficients for "integrate and dump" filter
samples_per_symbol = channel_rate // self.symbol_rate
symbol_coeffs = (1.0/samples_per_symbol,)*samples_per_symbol
symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
# C4FM demodulator
autotuneq = gr.msg_queue(2)
self.demod_watcher = demod_watcher(autotuneq, self.adjust_channel_offset)
demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate, self.symbol_rate)
# symbol slicer
levels = [ -2.0, 0.0, 2.0, 4.0 ]
slicer = op25.fsk4_slicer_fb(levels)
# ALSA output device (if not locked)
try:
sink = audio.sink(8000, "plughw:0,0", True) # ToDo: get actual device from prefs
except Exception:
sink = gr.null_sink(gr.sizeof_float)
# connect it all up
self.__connect([[source, self.channel_filter, self.squelch, fm_demod, symbol_filter, demod_fsk4, slicer, self.p25_decoder, sink],
[source, self.spectrum],
[symbol_filter, self.signal_scope],
[demod_fsk4, self.symbol_scope]])
def __build_graph(self, source, capture_rate):
# tell the scope the source rate
self.spectrum.set_sample_rate(capture_rate)
# channel filter
self.channel_offset = 0.0
channel_decim = capture_rate // self.channel_rate
channel_rate = capture_rate // channel_decim
trans_width = 12.5e3 / 2;
trans_centre = trans_width + (trans_width / 2)
coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre, trans_width, gr.firdes.WIN_HANN)
self.channel_filter = gr.freq_xlating_fir_filter_ccf(channel_decim, coeffs, -9500.0, capture_rate)
self.set_channel_offset(0.0, 0, self.spectrum.win._units)
# power squelch
squelch_db = -60
self.squelch = gr.pwr_squelch_cc(squelch_db, 1e-3, 0, True)
self.set_squelch_threshold(squelch_db)
# FM demodulator
fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
# symbol filter
symbol_decim = 1
#symbol_coeffs = gr.firdes.root_raised_cosine(1.0, channel_rate, self.symbol_rate, 0.2, 500)
# boxcar coefficients for "integrate and dump" filter
samples_per_symbol = channel_rate // self.symbol_rate
symbol_coeffs = (1.0/samples_per_symbol,)*samples_per_symbol
symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
# C4FM demodulator
autotuneq = gr.msg_queue(2)
self.demod_watcher = demod_watcher(autotuneq, self.adjust_channel_offset)
demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate, self.symbol_rate)
reverser = gr.multiply_const_ff(-1.0)
# for now no audio output
sink = gr.null_sink(gr.sizeof_float)
# connect it all up
self.__connect([[source, self.channel_filter, self.squelch, fm_demod, symbol_filter, demod_fsk4, reverser, self.slicer, self.p25_decoder, sink],
[source, self.spectrum],
[symbol_filter, self.signal_scope],
[demod_fsk4, self.symbol_scope]])
def create(self):
self.op25_msgq = gr.msg_queue(2)
self.slicer = None
try:
levels = [ -2.0, 0.0, 2.0, 4.0 ]
self.slicer = _op25.fsk4_slicer_fb(levels)
self.p25_decoder = _op25.decoder_bf() # FIXME: Message queue?
if _verbose:
print "Using new decoder_bf"
except:
try:
self.p25_decoder = _op25.decoder_ff(self.op25_msgq) # LEGACY
if _verbose:
print "Using legacy decoder_ff"
except:
raise Exception("Could not find a decoder to use")
# Reference code
#self.decode_watcher = decode_watcher(self.op25_msgq, self.traffic)
if (self.key is not None) and (len(self.key) > 0): # Relates to key string passed in from GRC block
self.set_key(self.key)
# Reference code
#trans_width = 12.5e3 / 2;
#trans_centre = trans_width + (trans_width / 2)
# discriminator tap doesn't do freq. xlation, FM demodulation, etc.
# coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre, trans_width, gr.firdes.WIN_HANN)
# self.channel_filter = gr.freq_xlating_fir_filter_ccf(channel_decim, coeffs, 0.0, capture_rate)
# self.set_channel_offset(0.0, 0, self.spectrum.win._units)
# # power squelch
# squelch_db = 0
# self.squelch = gr.pwr_squelch_cc(squelch_db, 1e-3, 0, True)
# self.set_squelch_threshold(squelch_db)
# # FM demodulator
# fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
# fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
# symbol filter
#symbol_decim = 1
#symbol_coeffs = gr.firdes.root_raised_cosine(1.0, channel_rate, self.symbol_rate, 0.2, 500)
# boxcar coefficients for "integrate and dump" filter
#samples_per_symbol = channel_rate // self.symbol_rate
#symbol_duration = float(self.symbol_rate) / channel_rate
#print "Symbol duration:", symbol_duration
#print "Samples per symbol:", samples_per_symbol
#symbol_coeffs = (1.0/samples_per_symbol,)*samples_per_symbol
#self.symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
# C4FM demodulator
#print "Symbol rate:", self.symbol_rate
if self.auto_tune_msgq is None:
self.auto_tune_msgq = gr.msg_queue(2)
try:
self.demod_fsk4 = _op25.fsk4_demod_ff(self.auto_tune_msgq, self.channel_rate, self.symbol_rate)
if _verbose:
print "Using new fsk4_demod_ff"
except:
try:
self.demod_fsk4 = fsk4.demod_ff(self.auto_tune_msgq, self.channel_rate, self.symbol_rate) # LEGACY
if _verbose:
print "Using legacy fsk4.demod_ff"
except:
raise Exception("Could not find a FSK4 demodulator to use")
# Reference code
#self.demod_watcher = demod_watcher(autotuneq, self.adjust_channel_offset)
#list = [[self, self.channel_filter, self.squelch, fm_demod, self.symbol_filter, demod_fsk4, self.p25_decoder, self.sink]]
self.connect(self, self.demod_fsk4)
if self.slicer:
self.connect(self.demod_fsk4, self.slicer)
self.connect(self.slicer, self.p25_decoder)
else:
self.connect(self.demod_fsk4, self.p25_decoder)
self.connect(self.p25_decoder, (self, 0))
if self.output_dibits:
self.connect(self.demod_fsk4, (self, 1))
def __init__(self, subdev_spec, center_freq, offset_freq, decim, squelch,
gain):
gr.top_block.__init__(self)
# configure USRP
u = usrp.source_c()
u.set_decim_rate(decim)
capture_rate = u.adc_freq() / u.decim_rate()
if subdev_spec is None:
subdev_spec = usrp.pick_rx_subdevice(u)
subdev = usrp.selected_subdev(u, subdev_spec)
u.set_mux(usrp.determine_rx_mux_value(u, subdev_spec))
print "Using RX d'board %s" % (subdev.side_and_name(), )
if gain is None:
g = subdev.gain_range()
gain = float(g[0] + g[1]) / 2
subdev.set_gain(gain)
u.tune(0, subdev, center_freq)
# setup receiver attributes
channel_rate = 125000
symbol_rate = 4800
# channel filter
self.channel_offset = offset_freq
channel_decim = capture_rate // channel_rate
channel_rate = capture_rate // channel_decim
trans_width = 12.5e3 / 2
trans_centre = trans_width + (trans_width / 2)
coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre,
trans_width, gr.firdes.WIN_HANN)
self.channel_filter = gr.freq_xlating_fir_filter_ccf(
channel_decim, coeffs, self.channel_offset, capture_rate)
self.connect(u, self.channel_filter)
# power squelch
power_squelch = gr.pwr_squelch_cc(squelch, 1e-3, 0, True)
self.connect(self.channel_filter, power_squelch)
# FM demodulator
self.symbol_deviation = 600.0
fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
self.connect(power_squelch, fm_demod)
# symbol filter
symbol_decim = 1
samples_per_symbol = channel_rate // symbol_rate
symbol_coeffs = (1.0 / samples_per_symbol, ) * samples_per_symbol
symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
self.connect(fm_demod, symbol_filter)
# C4FM demodulator
autotuneq = gr.msg_queue(2)
self.demod_watcher = demod_watcher(autotuneq,
self.adjust_channel_offset)
demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate, symbol_rate)
self.connect(symbol_filter, demod_fsk4)
# symbol slicer
levels = [-2.0, 0.0, 2.0, 4.0]
slicer = op25.fsk4_slicer_fb(levels)
self.connect(demod_fsk4, slicer)
# frame decoder
decoder = op25.decoder_bf()
self.connect(slicer, decoder)
# try to connect audio output device
try:
audio_sink = audio.sink(8000, "plughw:0,0", True)
self.connect(decoder, audio_sink)
except Exception:
sink = gr.null_sink(gr.sizeof_float)
self.connect(decoder, sink)
def __init__(self, interface, address, center_freq, offset_freq, decim,
squelch, gain):
gr.top_block.__init__(self)
# setup USRP2
u = usrp2.source_32fc(interface, address)
u.set_decim(decim)
capture_rate = u.adc_rate() / decim
u.set_center_freq(center_freq)
if gain is None:
g = u.gain_range()
gain = float(g[0] + g[1]) / 2
u.set_gain(gain)
# Setup receiver attributes
channel_rate = 125000
symbol_rate = 4800
# channel filter
self.channel_offset = offset_freq
channel_decim = capture_rate // channel_rate
channel_rate = capture_rate // channel_decim
trans_width = 12.5e3 / 2
trans_centre = trans_width + (trans_width / 2)
coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre,
trans_width, gr.firdes.WIN_HANN)
self.channel_filter = gr.freq_xlating_fir_filter_ccf(
channel_decim, coeffs, self.channel_offset, capture_rate)
self.connect(u, self.channel_filter)
# power squelch
power_squelch = gr.pwr_squelch_cc(squelch, 1e-3, 0, True)
self.connect(self.channel_filter, power_squelch)
# FM demodulator
self.symbol_deviation = 600.0
fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
self.connect(power_squelch, fm_demod)
# symbol filter
symbol_decim = 1
samples_per_symbol = channel_rate // symbol_rate
symbol_coeffs = (1.0 / samples_per_symbol, ) * samples_per_symbol
symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
self.connect(fm_demod, symbol_filter)
# C4FM demodulator
autotuneq = gr.msg_queue(2)
self.demod_watcher = demod_watcher(autotuneq,
self.adjust_channel_offset)
demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate, symbol_rate)
self.connect(symbol_filter, demod_fsk4)
# symbol slicer
levels = [-2.0, 0.0, 2.0, 4.0]
slicer = op25.fsk4_slicer_fb(levels)
self.connect(demod_fsk4, slicer)
# frame decoder
decoder = op25.decoder_bf()
self.connect(slicer, decoder)
# try to connect audio output device
try:
audio_sink = audio.sink(8000, "plughw:0,0", True)
self.connect(decoder, audio_sink)
except Exception:
sink = gr.null_sink(gr.sizeof_float)
self.connect(decoder, null)
def create(self):
self.op25_msgq = gr.msg_queue(2)
self.slicer = None
try:
levels = [-2.0, 0.0, 2.0, 4.0]
self.slicer = _op25.fsk4_slicer_fb(levels)
self.p25_decoder = _op25.decoder_bf() # FIXME: Message queue?
if _verbose:
print "Using new decoder_bf"
except:
try:
self.p25_decoder = _op25.decoder_ff(self.op25_msgq) # LEGACY
if _verbose:
print "Using legacy decoder_ff"
except:
raise Exception("Could not find a decoder to use")
# Reference code
#self.decode_watcher = decode_watcher(self.op25_msgq, self.traffic)
if (self.key is not None) and (
len(self.key) >
0): # Relates to key string passed in from GRC block
self.set_key(self.key)
# Reference code
#trans_width = 12.5e3 / 2;
#trans_centre = trans_width + (trans_width / 2)
# discriminator tap doesn't do freq. xlation, FM demodulation, etc.
# coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre, trans_width, gr.firdes.WIN_HANN)
# self.channel_filter = gr.freq_xlating_fir_filter_ccf(channel_decim, coeffs, 0.0, capture_rate)
# self.set_channel_offset(0.0, 0, self.spectrum.win._units)
# # power squelch
# squelch_db = 0
# self.squelch = gr.pwr_squelch_cc(squelch_db, 1e-3, 0, True)
# self.set_squelch_threshold(squelch_db)
# # FM demodulator
# fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
# fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
# symbol filter
#symbol_decim = 1
#symbol_coeffs = gr.firdes.root_raised_cosine(1.0, channel_rate, self.symbol_rate, 0.2, 500)
# boxcar coefficients for "integrate and dump" filter
#samples_per_symbol = channel_rate // self.symbol_rate
#symbol_duration = float(self.symbol_rate) / channel_rate
#print "Symbol duration:", symbol_duration
#print "Samples per symbol:", samples_per_symbol
#symbol_coeffs = (1.0/samples_per_symbol,)*samples_per_symbol
#self.symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
# C4FM demodulator
#print "Symbol rate:", self.symbol_rate
if self.auto_tune_msgq is None:
self.auto_tune_msgq = gr.msg_queue(2)
try:
self.demod_fsk4 = _op25.fsk4_demod_ff(self.auto_tune_msgq,
self.channel_rate,
self.symbol_rate)
if _verbose:
print "Using new fsk4_demod_ff"
except:
try:
self.demod_fsk4 = fsk4.demod_ff(self.auto_tune_msgq,
self.channel_rate,
self.symbol_rate) # LEGACY
if _verbose:
print "Using legacy fsk4.demod_ff"
except:
raise Exception("Could not find a FSK4 demodulator to use")
# Reference code
#self.demod_watcher = demod_watcher(autotuneq, self.adjust_channel_offset)
#list = [[self, self.channel_filter, self.squelch, fm_demod, self.symbol_filter, demod_fsk4, self.p25_decoder, self.sink]]
self.connect(self, self.demod_fsk4)
if self.slicer:
self.connect(self.demod_fsk4, self.slicer)
self.connect(self.slicer, self.p25_decoder)
else:
self.connect(self.demod_fsk4, self.p25_decoder)
self.connect(self.p25_decoder, (self, 0))
if self.output_dibits:
self.connect(self.demod_fsk4, (self, 1))
def __init__(self, filename, offset_freq, squelch):
gr.top_block.__init__(self)
# open file and info
f = open(filename + ".info", "r")
info = cPickle.load(f)
capture_rate = info["capture-rate"]
f.close()
file = gr.file_source(gr.sizeof_gr_complex, filename, True)
throttle = gr.throttle(gr.sizeof_gr_complex, capture_rate)
self.connect(file, throttle)
# setup receiver attributes
channel_rate = 125000
symbol_rate = 4800
# channel filter
self.channel_offset = offset_freq
channel_decim = capture_rate // channel_rate
channel_rate = capture_rate // channel_decim
trans_width = 12.5e3 / 2
trans_centre = trans_width + (trans_width / 2)
coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre,
trans_width, gr.firdes.WIN_HANN)
self.channel_filter = gr.freq_xlating_fir_filter_ccf(
channel_decim, coeffs, self.channel_offset, capture_rate)
self.connect(throttle, self.channel_filter)
# power squelch
power_squelch = gr.pwr_squelch_cc(squelch, 1e-3, 0, True)
self.connect(self.channel_filter, power_squelch)
# FM demodulator
self.symbol_deviation = 600.0
fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
self.connect(power_squelch, fm_demod)
# symbol filter
symbol_decim = 1
samples_per_symbol = channel_rate // symbol_rate
symbol_coeffs = (1.0 / samples_per_symbol, ) * samples_per_symbol
symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
self.connect(fm_demod, symbol_filter)
# C4FM demodulator
autotuneq = gr.msg_queue(2)
self.demod_watcher = demod_watcher(autotuneq,
self.adjust_channel_offset)
demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate, symbol_rate)
self.connect(symbol_filter, demod_fsk4)
# symbol slicer
levels = [-2.0, 0.0, 2.0, 4.0]
slicer = op25.fsk4_slicer_fb(levels)
self.connect(demod_fsk4, slicer)
# frame decoder
decoder = op25.decoder_bf()
self.connect(slicer, decoder)
# try to connect default output device
try:
audio_sink = audio.sink(8000, "plughw:0,0", True)
self.connect(decoder, audio_sink)
except Exception:
sink = gr.null_sink(gr.sizeof_float)
self.connect(decoder, sink)
def __init__(self):
gr.top_block.__init__(self)
parser = OptionParser(option_class=eng_option)
parser.add_option("-a", "--audio-input", type="string", default="")
parser.add_option("-A", "--audio-output", type="string", default="")
parser.add_option("-f", "--factor", type="eng_float", default=1)
parser.add_option("-i",
"--do-interp",
action="store_true",
default=False,
help="enable output interpolator")
parser.add_option("-s",
"--sample-rate",
type="int",
default=48000,
help="input sample rate")
parser.add_option("-S",
"--stretch",
type="int",
default=0,
help="flex amt")
parser.add_option("-y",
"--symbol-rate",
type="int",
default=4800,
help="input symbol rate")
parser.add_option("-v",
"--verbose",
action="store_true",
default=False,
help="dump demodulation data")
(options, args) = parser.parse_args()
sample_rate = options.sample_rate
symbol_rate = options.symbol_rate
IN = audio.source(sample_rate, options.audio_input)
audio_output_rate = 8000
if options.do_interp:
audio_output_rate = 48000
OUT = audio.sink(audio_output_rate, options.audio_output)
symbol_decim = 1
symbol_coeffs = gr.firdes.root_raised_cosine(
1.0, # gain
sample_rate, # sampling rate
symbol_rate, # symbol rate
0.2, # width of trans. band
500) # filter type
SYMBOL_FILTER = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
AMP = gr.multiply_const_ff(options.factor)
msgq = gr.msg_queue(2)
FSK4 = op25.fsk4_demod_ff(msgq, sample_rate, symbol_rate)
levels = levels = [-2.0, 0.0, 2.0, 4.0]
SLICER = repeater.fsk4_slicer_fb(levels)
framer_msgq = gr.msg_queue(2)
DECODE = repeater.p25_frame_assembler(
'', # udp hostname
0, # udp port no.
options.verbose, #debug
True, # do_imbe
True, # do_output
False, # do_msgq
framer_msgq)
IMBE = repeater.vocoder(
False, # 0=Decode,True=Encode
options.verbose, # Verbose flag
options.stretch, # flex amount
"", # udp ip address
0, # udp port
False) # dump raw u vectors
CVT = gr.short_to_float()
if options.do_interp:
interp_taps = gr.firdes.low_pass(1.0, 48000, 4000, 4000 * 0.1,
gr.firdes.WIN_HANN)
INTERP = gr.interp_fir_filter_fff(48000 // 8000, interp_taps)
AMP2 = gr.multiply_const_ff(1.0 / 32767.0)
self.connect(IN, AMP, SYMBOL_FILTER, FSK4, SLICER, DECODE, IMBE, CVT,
AMP2)
if options.do_interp:
self.connect(AMP2, INTERP, OUT)
else:
self.connect(AMP2, OUT)
def __init__(self, interface, address, center_freq, offset_freq, decim, squelch, gain):
gr.top_block.__init__(self)
# setup USRP2
u = usrp2.source_32fc(interface, address)
u.set_decim(decim)
capture_rate = u.adc_rate() / decim
u.set_center_freq(center_freq)
if gain is None:
g = u.gain_range()
gain = float(g[0] + g[1]) / 2
u.set_gain(gain)
# Setup receiver attributes
channel_rate = 125000
symbol_rate = 4800
# channel filter
self.channel_offset = offset_freq
channel_decim = capture_rate // channel_rate
channel_rate = capture_rate // channel_decim
trans_width = 12.5e3 / 2;
trans_centre = trans_width + (trans_width / 2)
coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre, trans_width, gr.firdes.WIN_HANN)
self.channel_filter = gr.freq_xlating_fir_filter_ccf(channel_decim, coeffs, self.channel_offset, capture_rate)
self.connect(u, self.channel_filter)
# power squelch
power_squelch = gr.pwr_squelch_cc(squelch, 1e-3, 0, True)
self.connect(self.channel_filter, power_squelch)
# FM demodulator
self.symbol_deviation = 600.0
fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
self.connect(power_squelch, fm_demod)
# symbol filter
symbol_decim = 1
samples_per_symbol = channel_rate // symbol_rate
symbol_coeffs = (1.0/samples_per_symbol,) * samples_per_symbol
symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
self.connect(fm_demod, symbol_filter)
# C4FM demodulator
autotuneq = gr.msg_queue(2)
self.demod_watcher = demod_watcher(autotuneq, self.adjust_channel_offset)
demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate, symbol_rate)
self.connect(symbol_filter, demod_fsk4)
# symbol slicer
levels = [ -2.0, 0.0, 2.0, 4.0 ]
slicer = op25.fsk4_slicer_fb(levels)
self.connect(demod_fsk4, slicer)
# frame decoder
decoder = op25.decoder_bf()
self.connect(slicer, decoder)
# try to connect audio output device
try:
audio_sink = audio.sink(8000, "plughw:0,0", True)
self.connect(decoder, audio_sink)
except Exception:
sink = gr.null_sink(gr.sizeof_float)
self.connect(decoder, null);
def __init__(self):
gr.top_block.__init__(self)
parser = OptionParser(option_class=eng_option)
parser.add_option("-a", "--audio-input", type="string", default="")
parser.add_option("-A",
"--analog-gain",
type="float",
default=1.0,
help="output gain for analog channel")
parser.add_option("-c",
"--ctcss-freq",
type="float",
default=0.0,
help="CTCSS tone frequency")
parser.add_option("-d",
"--debug",
type="int",
default=0,
help="debug level")
parser.add_option("-g",
"--gain",
type="eng_float",
default=1,
help="adjusts input level for standard data levels")
parser.add_option("-H",
"--hostname",
type="string",
default="127.0.0.1",
help="asterisk host IP")
parser.add_option("-p",
"--port",
type="int",
default=32001,
help="chan_usrp UDP port")
parser.add_option("-s",
"--sample-rate",
type="int",
default=48000,
help="input sample rate")
parser.add_option("-S", "--stretch", type="int", default=0)
(options, args) = parser.parse_args()
sample_rate = options.sample_rate
symbol_rate = 4800
symbol_decim = 1
IN = audio.source(sample_rate, options.audio_input)
symbol_coeffs = gr.firdes.root_raised_cosine(
1.0, # gain
sample_rate, # sampling rate
symbol_rate, # symbol rate
0.2, # width of trans. band
500) # filter type
SYMBOL_FILTER = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
AMP = gr.multiply_const_ff(options.gain)
msgq = gr.msg_queue(2)
FSK4 = op25.fsk4_demod_ff(msgq, sample_rate, symbol_rate)
levels = levels = [-2.0, 0.0, 2.0, 4.0]
SLICER = repeater.fsk4_slicer_fb(levels)
framer_msgq = gr.msg_queue(2)
DECODE = repeater.p25_frame_assembler(
'', # udp hostname
0, # udp port no.
options.debug, #debug
True, # do_imbe
True, # do_output
False, # do_msgq
framer_msgq)
IMBE = repeater.vocoder(
False, # 0=Decode,True=Encode
options.debug, # Verbose flag
options.stretch, # flex amount
"", # udp ip address
0, # udp port
False) # dump raw u vectors
CHAN_RPT = repeater.chan_usrp_rx(options.hostname, options.port,
options.debug)
self.connect(IN, AMP, SYMBOL_FILTER, FSK4, SLICER, DECODE, IMBE,
CHAN_RPT)
# blocks for second channel (fm rx)
output_sample_rate = 8000
decim_amt = sample_rate / output_sample_rate
RESAMP = blks2.rational_resampler_fff(1, decim_amt)
if options.ctcss_freq > 0:
level = 5.0
len = 0
ramp = 0
gate = True
CTCSS = repeater.ctcss_squelch_ff(output_sample_rate,
options.ctcss_freq, level, len,
ramp, gate)
AMP2 = gr.multiply_const_ff(32767.0 * options.analog_gain)
CVT = gr.float_to_short()
CHAN_RPT2 = repeater.chan_usrp_rx(options.hostname, options.port + 1,
options.debug)
if options.ctcss_freq > 0:
self.connect(IN, RESAMP, CTCSS, AMP2, CVT, CHAN_RPT2)
else:
self.connect(IN, RESAMP, AMP2, CVT, CHAN_RPT2)
def __init__(self, subdev_spec, center_freq, offset_freq, decim, squelch, gain):
gr.top_block.__init__(self)
# configure USRP
u = usrp.source_c()
u.set_decim_rate(decim)
capture_rate = u.adc_freq() / u.decim_rate()
if subdev_spec is None:
subdev_spec = usrp.pick_rx_subdevice(u)
subdev = usrp.selected_subdev(u, subdev_spec)
u.set_mux(usrp.determine_rx_mux_value(u, subdev_spec))
print "Using RX d'board %s" % (subdev.side_and_name(),)
if gain is None:
g = subdev.gain_range()
gain = float(g[0] + g[1]) / 2
subdev.set_gain(gain)
u.tune(0, subdev, center_freq)
# setup receiver attributes
channel_rate = 125000
symbol_rate = 4800
# channel filter
self.channel_offset = offset_freq
channel_decim = capture_rate // channel_rate
channel_rate = capture_rate // channel_decim
trans_width = 12.5e3 / 2;
trans_centre = trans_width + (trans_width / 2)
coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre, trans_width, gr.firdes.WIN_HANN)
self.channel_filter = gr.freq_xlating_fir_filter_ccf(channel_decim, coeffs, self.channel_offset, capture_rate)
self.connect(u, self.channel_filter)
# power squelch
power_squelch = gr.pwr_squelch_cc(squelch, 1e-3, 0, True)
self.connect(self.channel_filter, power_squelch)
# FM demodulator
self.symbol_deviation = 600.0
fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
self.connect(power_squelch, fm_demod)
# symbol filter
symbol_decim = 1
samples_per_symbol = channel_rate // symbol_rate
symbol_coeffs = (1.0/samples_per_symbol,) * samples_per_symbol
symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
self.connect(fm_demod, symbol_filter)
# C4FM demodulator
autotuneq = gr.msg_queue(2)
self.demod_watcher = demod_watcher(autotuneq, self.adjust_channel_offset)
demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate, symbol_rate)
self.connect(symbol_filter, demod_fsk4)
# symbol slicer
levels = [ -2.0, 0.0, 2.0, 4.0 ]
slicer = op25.fsk4_slicer_fb(levels)
self.connect(demod_fsk4, slicer)
# frame decoder
decoder = op25.decoder_bf()
self.connect(slicer, decoder)
# try to connect audio output device
try:
audio_sink = audio.sink(8000, "plughw:0,0", True)
self.connect(decoder, audio_sink)
except Exception:
sink = gr.null_sink(gr.sizeof_float)
self.connect(decoder, sink)
def __init__(self, filename, offset_freq, squelch):
gr.top_block.__init__(self)
# open file and info
f = open(filename + ".info", "r")
info = cPickle.load(f)
capture_rate = info["capture-rate"]
f.close()
file = gr.file_source(gr.sizeof_gr_complex, filename, True)
throttle = gr.throttle(gr.sizeof_gr_complex, capture_rate)
self.connect(file, throttle)
# setup receiver attributes
channel_rate = 125000
symbol_rate = 4800
# channel filter
self.channel_offset = offset_freq
channel_decim = capture_rate // channel_rate
channel_rate = capture_rate // channel_decim
trans_width = 12.5e3 / 2;
trans_centre = trans_width + (trans_width / 2)
coeffs = gr.firdes.low_pass(1.0, capture_rate, trans_centre, trans_width, gr.firdes.WIN_HANN)
self.channel_filter = gr.freq_xlating_fir_filter_ccf(channel_decim, coeffs, self.channel_offset, capture_rate)
self.connect(throttle, self.channel_filter)
# power squelch
power_squelch = gr.pwr_squelch_cc(squelch, 1e-3, 0, True)
self.connect(self.channel_filter, power_squelch)
# FM demodulator
self.symbol_deviation = 600.0
fm_demod_gain = channel_rate / (2.0 * pi * self.symbol_deviation)
fm_demod = gr.quadrature_demod_cf(fm_demod_gain)
self.connect(power_squelch, fm_demod)
# symbol filter
symbol_decim = 1
samples_per_symbol = channel_rate // symbol_rate
symbol_coeffs = (1.0/samples_per_symbol,) * samples_per_symbol
symbol_filter = gr.fir_filter_fff(symbol_decim, symbol_coeffs)
self.connect(fm_demod, symbol_filter)
# C4FM demodulator
autotuneq = gr.msg_queue(2)
self.demod_watcher = demod_watcher(autotuneq, self.adjust_channel_offset)
demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate, symbol_rate)
self.connect(symbol_filter, demod_fsk4)
# symbol slicer
levels = [ -2.0, 0.0, 2.0, 4.0 ]
slicer = op25.fsk4_slicer_fb(levels)
self.connect(demod_fsk4, slicer)
# frame decoder
decoder = op25.decoder_bf()
self.connect(slicer, decoder)
# try to connect default output device
try:
audio_sink = audio.sink(8000, "plughw:0,0", True)
self.connect(decoder, audio_sink)
except Exception:
sink = gr.null_sink(gr.sizeof_float)
self.connect(decoder, sink)
