def __init__(self, hunkNumber, nVertices, nCoords):
"""
hunkNumber - The index of this hunk, e.g. 0 for the first in a group.
Specifies the range of IDs residing in this hunk.
nVertices - The number of vertices in the primitive drawing pattern.
nCoords - The number of entries per attribute, e.g. 1 for float, 3 for
vec3, 4 for vec4, so the right size storage can be allocated.
"""
self.nVertices = nVertices
self.hunkNumber = hunkNumber
self.nCoords = nCoords
self.VBO = GLBufferObject(
GL_ARRAY_BUFFER_ARB,
# Per-vertex attributes are all multiples (1-4) of Float32.
HUNK_SIZE * self.nVertices * self.nCoords * BYTES_PER_FLOAT,
GL_STATIC_DRAW)
# Low- and high-water marks to optimize for sending a range of data.
self.unchanged()
return
def setup_drawer():
"""
Set up the usual constant display lists in the current OpenGL context.
WARNING: THIS IS ONLY CORRECT IF ONLY ONE GL CONTEXT CONTAINS DISPLAY LISTS
-- or more precisely, only the GL context this has last been called in (or
one which shares its display lists) will work properly with the routines in
drawer.py, since the allocated display list names are stored in globals set
by this function, but in general those names might differ if this was called
in different GL contexts.
"""
#bruce 060613 added docstring, cleaned up display list name allocation
# bruce 071030 renamed from setup to setup_drawer
spherelistbase = glGenLists(numSphereSizes)
sphereList = []
for i in range(numSphereSizes):
sphereList += [spherelistbase + i]
glNewList(sphereList[i], GL_COMPILE)
glBegin(GL_TRIANGLE_STRIP) # GL_LINE_LOOP to see edges.
stripVerts = getSphereTriStrips(i)
for vertNorm in stripVerts:
glNormal3fv(vertNorm)
glVertex3fv(vertNorm)
continue
glEnd()
glEndList()
continue
drawing_globals.sphereList = sphereList
# Sphere triangle-strip vertices for each level of detail.
# (Cache and re-use the work of making them.)
# Can use in converter-wrappered calls like glVertexPointerfv,
# but the python arrays are re-copied to C each time.
sphereArrays = []
for i in range(numSphereSizes):
sphereArrays += [getSphereTriStrips(i)]
continue
drawing_globals.sphereArrays = sphereArrays
# Sphere glDrawArrays triangle-strip vertices for C calls.
# (Cache and re-use the work of converting a C version.)
# Used in thinly-wrappered calls like glVertexPointer.
sphereCArrays = []
for i in range(numSphereSizes):
CArray = numpy.array(sphereArrays[i], dtype=numpy.float32)
sphereCArrays += [CArray]
continue
drawing_globals.sphereCArrays = sphereCArrays
# Sphere indexed vertices.
# (Cache and re-use the work of making the indexes.)
# Can use in converter-wrappered calls like glDrawElementsui,
# but the python arrays are re-copied to C each time.
sphereElements = [] # Pairs of lists (index, verts) .
for i in range(numSphereSizes):
sphereElements += [indexVerts(sphereArrays[i], .0001)]
continue
drawing_globals.sphereElements = sphereElements
# Sphere glDrawElements index and vertex arrays for C calls.
sphereCIndexTypes = [] # numpy index unsigned types.
sphereGLIndexTypes = [] # GL index types for drawElements.
sphereCElements = [] # Pairs of numpy arrays (Cindex, Cverts) .
for i in range(numSphereSizes):
(index, verts) = sphereElements[i]
if len(index) < 256:
Ctype = numpy.uint8
GLtype = GL_UNSIGNED_BYTE
else:
Ctype = numpy.uint16
GLtype = GL_UNSIGNED_SHORT
pass
sphereCIndexTypes += [Ctype]
sphereGLIndexTypes += [GLtype]
sphereCIndex = numpy.array(index, dtype=Ctype)
sphereCVerts = numpy.array(verts, dtype=numpy.float32)
sphereCElements += [(sphereCIndex, sphereCVerts)]
continue
drawing_globals.sphereCIndexTypes = sphereCIndexTypes
drawing_globals.sphereGLIndexTypes = sphereGLIndexTypes
drawing_globals.sphereCElements = sphereCElements
if glGetString(GL_EXTENSIONS).find("GL_ARB_vertex_buffer_object") >= 0:
# A GLBufferObject version for glDrawArrays.
sphereArrayVBOs = []
for i in range(numSphereSizes):
vbo = GLBufferObject(GL_ARRAY_BUFFER_ARB, sphereCArrays[i],
GL_STATIC_DRAW)
sphereArrayVBOs += [vbo]
continue
drawing_globals.sphereArrayVBOs = sphereArrayVBOs
# A GLBufferObject version for glDrawElements indexed verts.
sphereElementVBOs = [] # Pairs of (IBO, VBO)
for i in range(numSphereSizes):
ibo = GLBufferObject(GL_ELEMENT_ARRAY_BUFFER_ARB,
sphereCElements[i][0], GL_STATIC_DRAW)
vbo = GLBufferObject(GL_ARRAY_BUFFER_ARB, sphereCElements[i][1],
GL_STATIC_DRAW)
sphereElementVBOs += [(ibo, vbo)]
continue
drawing_globals.sphereElementVBOs = sphereElementVBOs
ibo.unbind()
vbo.unbind()
pass
#bruce 060415
drawing_globals.wiresphere1list = wiresphere1list = glGenLists(1)
glNewList(wiresphere1list, GL_COMPILE)
didlines = {} # don't draw each triangle edge more than once
def shoulddoline(v1, v2):
# make sure not list (unhashable) or Numeric array (bug in __eq__)
v1 = tuple(v1)
v2 = tuple(v2)
if (v1, v2) not in didlines:
didlines[(v1, v2)] = didlines[(v2, v1)] = None
return True
return False
def doline(v1, v2):
if shoulddoline(v1, v2):
glVertex3fv(v1)
glVertex3fv(v2)
return
glBegin(GL_LINES)
ocdec = getSphereTriangles(1)
for tri in ocdec:
#e Could probably optim this more, e.g. using a vertex array or VBO or
# maybe GL_LINE_STRIP.
doline(tri[0], tri[1])
doline(tri[1], tri[2])
doline(tri[2], tri[0])
glEnd()
glEndList()
drawing_globals.CylList = CylList = glGenLists(1)
glNewList(CylList, GL_COMPILE)
glBegin(GL_TRIANGLE_STRIP)
for (vtop, ntop, vbot, nbot) in drawing_globals.cylinderEdges:
glNormal3fv(nbot)
glVertex3fv(vbot)
glNormal3fv(ntop)
glVertex3fv(vtop)
glEnd()
glEndList()
drawing_globals.CapList = CapList = glGenLists(1)
glNewList(CapList, GL_COMPILE)
glNormal3fv(drawing_globals.cap0n)
glBegin(GL_POLYGON)
for p in drawing_globals.drum0:
glVertex3fv(p)
glEnd()
glNormal3fv(drawing_globals.cap1n)
glBegin(GL_POLYGON)
#bruce 060609 fix "ragged edge" bug in this endcap: drum1 -> drum2
for p in drawing_globals.drum2:
glVertex3fv(p)
glEnd()
glEndList()
drawing_globals.diamondGridList = diamondGridList = glGenLists(1)
glNewList(diamondGridList, GL_COMPILE)
glBegin(GL_LINES)
for p in drawing_globals.digrid:
glVertex(p[0])
glVertex(p[1])
glEnd()
glEndList()
drawing_globals.lonsGridList = lonsGridList = glGenLists(1)
glNewList(lonsGridList, GL_COMPILE)
glBegin(GL_LINES)
for p in drawing_globals.lonsEdges:
glVertex(p[0])
glVertex(p[1])
glEnd()
glEndList()
drawing_globals.CubeList = CubeList = glGenLists(1)
glNewList(CubeList, GL_COMPILE)
glBegin(GL_QUAD_STRIP)
# note: CubeList has only 4 faces of the cube; only suitable for use in
# wireframes; see also solidCubeList [bruce 051215 comment reporting
# grantham 20051213 observation]
glVertex((-1, -1, -1))
glVertex((1, -1, -1))
glVertex((-1, 1, -1))
glVertex((1, 1, -1))
glVertex((-1, 1, 1))
glVertex((1, 1, 1))
glVertex((-1, -1, 1))
glVertex((1, -1, 1))
glVertex((-1, -1, -1))
glVertex((1, -1, -1))
glEnd()
glEndList()
drawing_globals.solidCubeList = solidCubeList = glGenLists(1)
glNewList(solidCubeList, GL_COMPILE)
glBegin(GL_QUADS)
for i in xrange(len(drawing_globals.cubeIndices)):
avenormals = V(0, 0, 0) #bruce 060302 fixed normals for flat shading
for j in xrange(4):
nTuple = tuple(
drawing_globals.cubeNormals[drawing_globals.cubeIndices[i][j]])
avenormals += A(nTuple)
avenormals = norm(avenormals)
for j in xrange(4):
vTuple = tuple(drawing_globals.cubeVertices[
drawing_globals.cubeIndices[i][j]])
#bruce 060302 made size compatible with glut.glutSolidCube(1.0)
vTuple = A(vTuple) * 0.5
glNormal3fv(avenormals)
glVertex3fv(vTuple)
glEnd()
glEndList()
drawing_globals.rotSignList = rotSignList = glGenLists(1)
glNewList(rotSignList, GL_COMPILE)
glBegin(GL_LINE_STRIP)
for ii in xrange(len(drawing_globals.rotS0n)):
glVertex3fv(tuple(drawing_globals.rotS0n[ii]))
glEnd()
glBegin(GL_LINE_STRIP)
for ii in xrange(len(drawing_globals.rotS1n)):
glVertex3fv(tuple(drawing_globals.rotS1n[ii]))
glEnd()
glBegin(GL_TRIANGLES)
for v in drawing_globals.arrow0Vertices + drawing_globals.arrow1Vertices:
glVertex3f(v[0], v[1], v[2])
glEnd()
glEndList()
drawing_globals.linearArrowList = linearArrowList = glGenLists(1)
glNewList(linearArrowList, GL_COMPILE)
glBegin(GL_TRIANGLES)
for v in drawing_globals.linearArrowVertices:
glVertex3f(v[0], v[1], v[2])
glEnd()
glEndList()
drawing_globals.linearLineList = linearLineList = glGenLists(1)
glNewList(linearLineList, GL_COMPILE)
glEnable(GL_LINE_SMOOTH)
glBegin(GL_LINES)
glVertex3f(0.0, 0.0, -drawing_globals.halfHeight)
glVertex3f(0.0, 0.0, drawing_globals.halfHeight)
glEnd()
glDisable(GL_LINE_SMOOTH)
glEndList()
drawing_globals.circleList = circleList = glGenLists(1)
glNewList(circleList, GL_COMPILE)
glBegin(GL_LINE_LOOP)
for ii in range(60):
x = cos(ii * 2.0 * pi / 60)
y = sin(ii * 2.0 * pi / 60)
glVertex3f(x, y, 0.0)
glEnd()
glEndList()
# piotr 080405
drawing_globals.filledCircleList = filledCircleList = glGenLists(1)
glNewList(filledCircleList, GL_COMPILE)
glBegin(GL_POLYGON)
for ii in range(60):
x = cos(ii * 2.0 * pi / 60)
y = sin(ii * 2.0 * pi / 60)
glVertex3f(x, y, 0.0)
glEnd()
glEndList()
drawing_globals.lineCubeList = lineCubeList = glGenLists(1)
glNewList(lineCubeList, GL_COMPILE)
glBegin(GL_LINES)
cvIndices = [
0, 1, 2, 3, 4, 5, 6, 7, 0, 3, 1, 2, 5, 6, 4, 7, 0, 4, 1, 5, 2, 6, 3, 7
]
for i in cvIndices:
glVertex3fv(tuple(drawing_globals.cubeVertices[i]))
glEnd()
glEndList()
# Debug Preferences
from utilities.debug_prefs import debug_pref, Choice_boolean_True
from utilities.debug_prefs import Choice_boolean_False
choices = [Choice_boolean_False, Choice_boolean_True]
# 20060314 grantham
initial_choice = choices[drawing_globals.allow_color_sorting_default]
drawing_globals.allow_color_sorting_pref = debug_pref(
"Use Color Sorting?",
initial_choice,
prefs_key=drawing_globals.allow_color_sorting_prefs_key)
#bruce 060323 removed non_debug = True for A7 release, changed default
#value to False (far above), and changed its prefs_key so developers
#start with the new default value.
#russ 080225: Added.
initial_choice = choices[drawing_globals.use_color_sorted_dls_default]
drawing_globals.use_color_sorted_dls_pref = debug_pref(
"Use Color-sorted Display Lists?",
initial_choice,
prefs_key=drawing_globals.use_color_sorted_dls_prefs_key)
#russ 080225: Added.
initial_choice = choices[drawing_globals.use_color_sorted_vbos_default]
drawing_globals.use_color_sorted_vbos_pref = debug_pref(
"Use Color-sorted Vertex Buffer Objects?",
initial_choice,
prefs_key=drawing_globals.use_color_sorted_vbos_prefs_key)
#russ 080403: Added drawing variant selection
variants = [
"0. OpenGL 1.0 - glBegin/glEnd tri-strips vertex-by-vertex.",
"1. OpenGL 1.1 - glDrawArrays from CPU RAM.",
"2. OpenGL 1.1 - glDrawElements indexed arrays from CPU RAM.",
"3. OpenGL 1.5 - glDrawArrays from graphics RAM VBO.",
"4. OpenGL 1.5 - glDrawElements, verts in VBO, index in CPU.",
"5. OpenGL 1.5 - VBO/IBO buffered glDrawElements."
]
drawing_globals.use_drawing_variant = debug_pref(
"GLPane: drawing method",
Choice(names=variants,
values=range(len(variants)),
defaultValue=drawing_globals.use_drawing_variant_default),
prefs_key=drawing_globals.use_drawing_variant_prefs_key)
# temporarily always print this, while default setting might be in flux,
# and to avoid confusion if the two necessary prefs are set differently
# [bruce 080305]
if (drawing_globals.allow_color_sorting_pref
and drawing_globals.use_color_sorted_dls_pref):
print "\nnote: this session WILL use color sorted display lists"
else:
print "\nnote: this session will NOT use color sorted display lists"
if (drawing_globals.allow_color_sorting_pref
and drawing_globals.use_color_sorted_vbos_pref):
print "note: this session WILL use", \
"color sorted Vertex Buffer Objects\n"
else:
print "note: this session will NOT use", \
"color sorted Vertex Buffer Objects\n"
# 20060313 grantham Added use_c_renderer debug pref, can
# take out when C renderer used by default.
if drawing_globals.quux_module_import_succeeded:
initial_choice = choices[drawing_globals.use_c_renderer_default]
drawing_globals.use_c_renderer = (debug_pref(
"Use native C renderer?",
initial_choice,
prefs_key=drawing_globals.use_c_renderer_prefs_key))
#bruce 060323 removed non_debug = True for A7 release, and changed
# its prefs_key so developers start over with the default value.
#initTexture('C:\\Huaicai\\atom\\temp\\newSample.png', 128,128)
return # from setup_drawer
def setup_drawer():
"""
Set up the usual constant display lists in the current OpenGL context.
WARNING: THIS IS ONLY CORRECT IF ONLY ONE GL CONTEXT CONTAINS DISPLAY LISTS
-- or more precisely, only the GL context this has last been called in (or
one which shares its display lists) will work properly with the routines in
drawer.py, since the allocated display list names are stored in globals set
by this function, but in general those names might differ if this was called
in different GL contexts.
"""
spherelistbase = glGenLists(_NUM_SPHERE_SIZES)
sphereList = []
for i in range(_NUM_SPHERE_SIZES):
sphereList += [spherelistbase+i]
glNewList(sphereList[i], GL_COMPILE)
glBegin(GL_TRIANGLE_STRIP) # GL_LINE_LOOP to see edges
stripVerts = getSphereTriStrips(i)
for vertNorm in stripVerts:
glNormal3fv(vertNorm)
glVertex3fv(vertNorm)
continue
glEnd()
glEndList()
continue
drawing_globals.sphereList = sphereList
# Sphere triangle-strip vertices for each level of detail.
# (Cache and re-use the work of making them.)
# Can use in converter-wrappered calls like glVertexPointerfv,
# but the python arrays are re-copied to C each time.
sphereArrays = []
for i in range(_NUM_SPHERE_SIZES):
sphereArrays += [getSphereTriStrips(i)]
continue
drawing_globals.sphereArrays = sphereArrays
# Sphere glDrawArrays triangle-strip vertices for C calls.
# (Cache and re-use the work of converting a C version.)
# Used in thinly-wrappered calls like glVertexPointer.
sphereCArrays = []
for i in range(_NUM_SPHERE_SIZES):
CArray = numpy.array(sphereArrays[i], dtype = numpy.float32)
sphereCArrays += [CArray]
continue
drawing_globals.sphereCArrays = sphereCArrays
# Sphere indexed vertices.
# (Cache and re-use the work of making the indexes.)
# Can use in converter-wrappered calls like glDrawElementsui,
# but the python arrays are re-copied to C each time.
sphereElements = [] # Pairs of lists (index, verts) .
for i in range(_NUM_SPHERE_SIZES):
sphereElements += [indexVerts(sphereArrays[i], .0001)]
continue
drawing_globals.sphereElements = sphereElements
# Sphere glDrawElements index and vertex arrays for C calls.
sphereCIndexTypes = [] # numpy index unsigned types.
sphereGLIndexTypes = [] # GL index types for drawElements.
sphereCElements = [] # Pairs of numpy arrays (Cindex, Cverts) .
for i in range(_NUM_SPHERE_SIZES):
(index, verts) = sphereElements[i]
if len(index) < 256:
Ctype = numpy.uint8
GLtype = GL_UNSIGNED_BYTE
else:
Ctype = numpy.uint16
GLtype = GL_UNSIGNED_SHORT
pass
sphereCIndexTypes += [Ctype]
sphereGLIndexTypes += [GLtype]
sphereCIndex = numpy.array(index, dtype = Ctype)
sphereCVerts = numpy.array(verts, dtype = numpy.float32)
sphereCElements += [(sphereCIndex, sphereCVerts)]
continue
drawing_globals.sphereCIndexTypes = sphereCIndexTypes
drawing_globals.sphereGLIndexTypes = sphereGLIndexTypes
drawing_globals.sphereCElements = sphereCElements
if glGetString(GL_EXTENSIONS).find("GL_ARB_vertex_buffer_object") >= 0:
# A GLBufferObject version for glDrawArrays.
sphereArrayVBOs = []
for i in range(_NUM_SPHERE_SIZES):
vbo = GLBufferObject(GL_ARRAY_BUFFER_ARB,
sphereCArrays[i], GL_STATIC_DRAW)
sphereArrayVBOs += [vbo]
continue
drawing_globals.sphereArrayVBOs = sphereArrayVBOs
# A GLBufferObject version for glDrawElements indexed verts.
sphereElementVBOs = [] # Pairs of (IBO, VBO)
for i in range(_NUM_SPHERE_SIZES):
ibo = GLBufferObject(GL_ELEMENT_ARRAY_BUFFER_ARB,
sphereCElements[i][0], GL_STATIC_DRAW)
vbo = GLBufferObject(GL_ARRAY_BUFFER_ARB,
sphereCElements[i][1], GL_STATIC_DRAW)
sphereElementVBOs += [(ibo, vbo)]
continue
drawing_globals.sphereElementVBOs = sphereElementVBOs
ibo.unbind()
vbo.unbind()
pass
#bruce 060415
drawing_globals.wiresphere1list = wiresphere1list = glGenLists(1)
glNewList(wiresphere1list, GL_COMPILE)
didlines = {} # don't draw each triangle edge more than once
def shoulddoline(v1,v2):
# make sure not list (unhashable) or Numeric array (bug in __eq__)
v1 = tuple(v1)
v2 = tuple(v2)
if (v1,v2) not in didlines:
didlines[(v1,v2)] = didlines[(v2,v1)] = None
return True
return False
def doline(v1,v2):
if shoulddoline(v1,v2):
glVertex3fv(v1)
glVertex3fv(v2)
return
glBegin(GL_LINES)
ocdec = getSphereTriangles(1)
for tri in ocdec:
#e Could probably optim this more, e.g. using a vertex array or VBO or
# maybe GL_LINE_STRIP.
doline(tri[0], tri[1])
doline(tri[1], tri[2])
doline(tri[2], tri[0])
glEnd()
glEndList()
drawing_globals.CylList = CylList = glGenLists(1)
glNewList(CylList, GL_COMPILE)
glBegin(GL_TRIANGLE_STRIP)
for (vtop, ntop, vbot, nbot) in drawing_globals.cylinderEdges:
glNormal3fv(nbot)
glVertex3fv(vbot)
glNormal3fv(ntop)
glVertex3fv(vtop)
glEnd()
glEndList()
drawing_globals.CapList = CapList = glGenLists(1)
glNewList(CapList, GL_COMPILE)
glNormal3fv(drawing_globals.cap0n)
glBegin(GL_POLYGON)
for p in drawing_globals.drum0:
glVertex3fv(p)
glEnd()
glNormal3fv(drawing_globals.cap1n)
glBegin(GL_POLYGON)
#bruce 060609 fix "ragged edge" bug in this endcap: drum1 -> drum2
for p in drawing_globals.drum2:
glVertex3fv(p)
glEnd()
glEndList()
drawing_globals.diamondGridList = diamondGridList = glGenLists(1)
glNewList(diamondGridList, GL_COMPILE)
glBegin(GL_LINES)
for p in drawing_globals.digrid:
glVertex(p[0])
glVertex(p[1])
glEnd()
glEndList()
drawing_globals.lonsGridList = lonsGridList = glGenLists(1)
glNewList(lonsGridList, GL_COMPILE)
glBegin(GL_LINES)
for p in drawing_globals.lonsEdges:
glVertex(p[0])
glVertex(p[1])
glEnd()
glEndList()
drawing_globals.CubeList = CubeList = glGenLists(1)
glNewList(CubeList, GL_COMPILE)
glBegin(GL_QUAD_STRIP)
# note: CubeList has only 4 faces of the cube; only suitable for use in
# wireframes; see also solidCubeList [bruce 051215 comment reporting
# grantham 20051213 observation]
glVertex((-1,-1,-1))
glVertex(( 1,-1,-1))
glVertex((-1, 1,-1))
glVertex(( 1, 1,-1))
glVertex((-1, 1, 1))
glVertex(( 1, 1, 1))
glVertex((-1,-1, 1))
glVertex(( 1,-1, 1))
glVertex((-1,-1,-1))
glVertex(( 1,-1,-1))
glEnd()
glEndList()
drawing_globals.solidCubeList = solidCubeList = glGenLists(1)
glNewList(solidCubeList, GL_COMPILE)
glBegin(GL_QUADS)
for i in xrange(len(drawing_globals.cubeIndices)):
avenormals = V(0,0,0) #bruce 060302 fixed normals for flat shading
for j in xrange(4) :
nTuple = tuple(
drawing_globals.cubeNormals[drawing_globals.cubeIndices[i][j]])
avenormals += A(nTuple)
avenormals = norm(avenormals)
for j in xrange(4) :
vTuple = tuple(
drawing_globals.cubeVertices[drawing_globals.cubeIndices[i][j]])
#bruce 060302 made size compatible with glut.glutSolidCube(1.0)
vTuple = A(vTuple) * 0.5
glNormal3fv(avenormals)
glVertex3fv(vTuple)
glEnd()
glEndList()
drawing_globals.rotSignList = rotSignList = glGenLists(1)
glNewList(rotSignList, GL_COMPILE)
glBegin(GL_LINE_STRIP)
for ii in xrange(len(drawing_globals.rotS0n)):
glVertex3fv(tuple(drawing_globals.rotS0n[ii]))
glEnd()
glBegin(GL_LINE_STRIP)
for ii in xrange(len(drawing_globals.rotS1n)):
glVertex3fv(tuple(drawing_globals.rotS1n[ii]))
glEnd()
glBegin(GL_TRIANGLES)
for v in drawing_globals.arrow0Vertices + drawing_globals.arrow1Vertices:
glVertex3f(v[0], v[1], v[2])
glEnd()
glEndList()
drawing_globals.linearArrowList = linearArrowList = glGenLists(1)
glNewList(linearArrowList, GL_COMPILE)
glBegin(GL_TRIANGLES)
for v in drawing_globals.linearArrowVertices:
glVertex3f(v[0], v[1], v[2])
glEnd()
glEndList()
drawing_globals.linearLineList = linearLineList = glGenLists(1)
glNewList(linearLineList, GL_COMPILE)
glEnable(GL_LINE_SMOOTH)
glBegin(GL_LINES)
glVertex3f(0.0, 0.0, -drawing_globals.halfHeight)
glVertex3f(0.0, 0.0, drawing_globals.halfHeight)
glEnd()
glDisable(GL_LINE_SMOOTH)
glEndList()
drawing_globals.circleList = circleList = glGenLists(1)
glNewList(circleList, GL_COMPILE)
glBegin(GL_LINE_LOOP)
for ii in range(60):
x = cos(ii*2.0*pi/60)
y = sin(ii*2.0*pi/60)
glVertex3f(x, y, 0.0)
glEnd()
glEndList()
# piotr 080405
drawing_globals.filledCircleList = filledCircleList = glGenLists(1)
glNewList(filledCircleList, GL_COMPILE)
glBegin(GL_POLYGON)
for ii in range(60):
x = cos(ii*2.0*pi/60)
y = sin(ii*2.0*pi/60)
glVertex3f(x, y, 0.0)
glEnd()
glEndList()
drawing_globals.lineCubeList = lineCubeList = glGenLists(1)
glNewList(lineCubeList, GL_COMPILE)
glBegin(GL_LINES)
cvIndices = [0,1, 2,3, 4,5, 6,7, 0,3, 1,2, 5,6, 4,7, 0,4, 1,5, 2,6, 3,7]
for i in cvIndices:
glVertex3fv(tuple(drawing_globals.cubeVertices[i]))
glEnd()
glEndList()
#initTexture('C:\\Huaicai\\atom\\temp\\newSample.png', 128,128)
return # from setup_drawer
def _setupSharedVertexData(self):
"""
Gather data for the drawing pattern Vertex and Index Buffer Objects
shared by all hunks of the same primitive type. The drawing pattern is
replicated HUNK_SIZE times, and sent to graphics card RAM for use in
every draw command for collections of primitives of this type.
In theory, the vertex shader processes each vertex only once, even if
it is indexed many times in different faces within the same draw. In
practice, locality of vertex referencing in the drawing pattern is
optimal, since there may be a cache of the most recent N transformed
vertices in that stage of the drawing pipeline on graphics card.
For indexed gl(Multi)DrawElements, the index is a list of faces
(typically triangles or quads, specified by the drawingMode.) Each
face is represented by a block of subscripts into the vertex block.
For glMultiDrawElements, there is an additional pair of arrays that give
offsets into blocks of the index block list, and the lengths of each
block of indices. Because the index blocks are all the same length to
draw individual primitives, we set up a single array containing a Hunk's
worth of the index block length constant and use it for each Hunk draw.
"""
self.nIndices = len(self.indexBlock) * len(self.indexBlock[0])
indexOffset = 0
# (May cache these someday. No need now since they don't change.)
Py_iboIndices = []
Py_vboVerts = []
for i in range(HUNK_SIZE):
# Accumulate a hunk full of blocks of vertices. Each block is
# identical, with coordinates relative to its local primitive
# origin. Hence, the vertex VBO may be shared among all hunks of
# primitives of the same type. A per-vertex attribute gives the
# spatial location of the primitive origin, and is combined with the
# local vertex coordinates in the vertex shader program.
Py_vboVerts += self.vertexBlock
# Accumulate a hunk full of index blocks, offsetting the indices in
# each block to point to the vertices for the corresponding
# primitive block in the vertex hunk.
for face in self.indexBlock:
Py_iboIndices += [idx + indexOffset for idx in face]
continue
indexOffset += self.nVertices
continue
# Push shared vbo/ibo hunk data through C to the graphics card RAM.
C_vboVerts = numpy.array(Py_vboVerts, dtype=numpy.float32)
self.hunkVertVBO = GLBufferObject(GL_ARRAY_BUFFER_ARB, C_vboVerts,
GL_STATIC_DRAW)
self.hunkVertVBO.unbind()
C_iboIndices = numpy.array(Py_iboIndices, dtype=numpy.uint32)
self.hunkIndexIBO = GLBufferObject(GL_ELEMENT_ARRAY_BUFFER_ARB,
C_iboIndices, GL_STATIC_DRAW)
self.hunkIndexIBO.unbind()
# A Hunk-length of index block length constants for glMultiDrawElements.
self.C_indexBlockLengths = numpy.array(HUNK_SIZE * [self.nIndices],
dtype=numpy.uint32)
return
def test_drawing(glpane, initOnly=False):
"""
When TEST_DRAWING is enabled at the start of
graphics/widgets/GLPane_rendering_methods.py,
and when TestGraphics_Command is run (see its documentation
for various ways to do that),
this file is loaded and GLPane.paintGL() calls the
test_drawing() function instead of the usual body of paintGL().
"""
# WARNING: this duplicates some code with test_Draw_model().
# Load the sphere shaders if needed.
global _USE_SHADERS
if _USE_SHADERS:
if not drawing_globals.test_sphereShader:
print "test_drawing: Loading sphere shaders."
try:
from graphics.drawing.gl_shaders import GLSphereShaderObject
drawing_globals.test_sphereShader = GLSphereShaderObject()
##### REVIEW: is this compatible with my refactoring in drawing_globals?
# If not, use of Test Graphics Performance command might cause subsequent
# bugs in other code. Ideally we'd call the new methods that encapsulate
# this, to setup shaders. [bruce 090304 comment]
print "test_drawing: Sphere-shader initialization is complete.\n"
except:
_USE_SHADERS = False
print "test_drawing: Exception while loading sphere shaders, will reraise and not try again"
raise
pass
global start_pos, first_time
if first_time:
# Set up the viewing scale, but then let interactive zooming work.
glpane.scale = nSpheres * .6
pass
# This same function gets called to set up for drawing, and to draw.
if not initOnly:
glpane._setup_modelview()
glpane._setup_projection()
##glpane._compute_frustum_planes()
glClearColor(64.0, 64.0, 64.0, 1.0)
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT
| GL_STENCIL_BUFFER_BIT)
##glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT )
glMatrixMode(GL_MODELVIEW)
pass
global test_csdl, test_dl, test_dls, test_ibo, test_vbo, test_spheres
global test_DrawingSet, test_endpoints, test_Object
# See below for test case descriptions and timings on a MacBook Pro.
# The Qt event toploop in NE1 tops out at about 60 frames-per-second.
# NE1 with test toploop, single CSDL per draw (test case 1)
# . 17,424 spheres (132x132, through the color sorter) 4.8 FPS
# Russ 080919: More recently, 12.2 FPS.
# . Level 2 spheres have 9 triangles x 20 faces, 162 distinct vertices,
# visited on the average 2.3 times, giving 384 tri-strip vertices.
# . 17,424 spheres is 6.7 million tri-strip vertices. (6,690,816)
if testCase == 1:
if test_csdl is None:
print("Test case 1, %d^2 spheres\n %s." %
(nSpheres, "ColorSorter"))
test_csdl = ColorSortedDisplayList()
ColorSorter.start(None, test_csdl)
drawsphere(
[0.5, 0.5, 0.5], # color
[0.0, 0.0, 0.0], # pos
.5, # radius
DRAWSPHERE_DETAIL_LEVEL,
testloop=nSpheres)
ColorSorter.finish(draw_now=True)
pass
else:
test_csdl.draw()
pass
# NE1 with test toploop, single display list per draw (test case 2)
# . 10,000 spheres (all drawing modes) 17.5 FPS
# . 17,424 spheres (132x132, manual display list) 11.1 FPS
# . 40,000 spheres (mode 5 - VBO/IBO spheres from DL's) 2.2 FPS
# . 40,000 spheres (mode 6 - Sphere shaders from DL's) 2.5 FPS
# . 90,000 spheres (all drawing modes) 1.1 FPS
elif testCase == 2:
if test_dl is None:
print("Test case 2, %d^2 spheres\n %s." %
(nSpheres, "One display list calling primitive dl's"))
test_dl = glGenLists(1)
glNewList(test_dl, GL_COMPILE_AND_EXECUTE)
drawsphere_worker_loop((
[0.0, 0.0, 0.0], # pos
.5, # radius
DRAWSPHERE_DETAIL_LEVEL,
nSpheres))
glEndList()
pass
else:
glColor3i(127, 127, 127)
glCallList(test_dl)
pass
# NE1 with test toploop, one big chunk VBO/IBO of box quads (test case 3)
# . 17,424 spheres (1 box/shader draw call) 43.7 FPS
# . 17,424 spheres (1 box/shader draw call w/ rad/ctrpt attrs) 57.7 FPS
# . 40,000 spheres (1 box/shader draw call w/ rad/ctrpt attrs) 56.7 FPS
# . 90,000 spheres (1 box/shader draw call w/ rad/ctrpt attrs) 52.7 FPS
# . 160,000 spheres (1 box/shader draw call w/ rad/ctrpt attrs) 41.4 FPS
# . 250,000 spheres (1 box/shader draw call w/ rad/ctrpt attrs) 27.0 FPS
elif int(testCase) == 3:
doTransforms = False
if test_spheres is None:
print("Test case 3, %d^2 spheres\n %s." %
(nSpheres, "One big VBO/IBO chunk buffer"))
if testCase == 3.1:
print("Sub-test 3.1, animate partial updates.")
elif testCase == 3.2:
print("Sub-test 3.2, animate partial updates" +
" w/ C per-chunk array buffering.")
elif testCase == 3.3:
print("Sub-test 3.3, animate partial updates" +
" w/ Python array buffering.")
# . 3.4 - Big batch draw, with transforms indexed by IDs added.
# (Second FPS number with debug colors in the vertex shader off.)
# - 90,000 (300x300) spheres, TEXTURE_XFORMS = True, 26(29) FPS
# - 90,000 (300x300) spheres, N_CONST_XFORMS = 250, 26(29) FPS
# - 90,000 (300x300) spheres, N_CONST_XFORMS = 275, 0.3(0.6) FPS
# (What happens after 250? CPU usage goes from 40% to 94%.)
# -160,000 (400x400) spheres, TEXTURE_XFORMS = True, 26 FPS
# -250,000 (500x500) spheres, TEXTURE_XFORMS = True, 26 FPS
elif testCase == 3.4:
print("Sub-test 3.4, add transforms indexed by IDs.")
from graphics.drawing.gl_shaders import TEXTURE_XFORMS
from graphics.drawing.gl_shaders import N_CONST_XFORMS
from graphics.drawing.gl_shaders import UNIFORM_XFORMS
if TEXTURE_XFORMS:
print "Transforms in texture memory."
elif UNIFORM_XFORMS:
print "%d transforms in uniform memory." % N_CONST_XFORMS
pass
else:
print "transforms not supported, error is likely"
doTransforms = True
pass
centers = []
radius = .5
radii = []
colors = []
if not doTransforms:
transformIDs = None
else:
transformIDs = []
transformChunkID = -1 # Allocate IDs sequentially from 0.
# For this test, allow arbitrarily chunking the primitives.
primCounter = transformChunkLength
transforms = [] # Accumulate transforms as a list of lists.
# Initialize transforms with an identity matrix.
# Transforms here are lists (or Numpy arrays) of 16 numbers.
identity = ([1.0] + 4 * [0.0]) * 3 + [1.0]
pass
for x in range(nSpheres):
for y in range(nSpheres):
centers += [sphereLoc(x, y)]
# Sphere radii progress from 3/4 to full size.
t = float(x + y) / (nSpheres + nSpheres
) # 0 to 1 fraction.
thisRad = radius * (.75 + t * .25)
radii += [thisRad]
# Colors progress from red to blue.
colors += [rainbow(t)]
# Transforms go into a texture memory image if needed.
# Per-primitive Transform IDs go into an attribute VBO.
if doTransforms:
primCounter = primCounter + 1
if primCounter >= transformChunkLength:
# Start a new chunk, allocating a transform matrix.
primCounter = 0
transformChunkID += 1
if 0: # 1
# Debug hack: Label mat[0,0] with the chunk ID.
# Vertex shader debug code shows these in blue.
# If viewed as geometry, it will be a slight
# stretch of the array in the X direction.
transforms += [
[1.0 + transformChunkID / 100.0] +
identity[1:]
]
elif 0: # 1
# Debug hack: Fill mat with mat.element pattern.
transforms += [[
transformChunkID + i / 100.0
for i in range(16)
]]
else:
transforms += [identity]
pass
pass
# All of the primitives in a chunk have the same ID.
transformIDs += [transformChunkID]
pass
continue
continue
test_spheres = GLSphereBuffer()
test_spheres.addSpheres(centers, radii, colors, transformIDs, None)
if doTransforms:
print("%d primitives in %d transform chunks of size <= %d" %
(nSpheres * nSpheres, len(transforms),
transformChunkLength))
shader = drawing_globals.test_sphereShader
shader.setupTransforms(transforms)
pass
else:
shader = drawing_globals.test_sphereShader
shader.configShader(glpane)
# Update portions for animation.
pulse = time.time()
pulse -= floor(pulse) # 0 to 1 in each second
# Test animating updates on 80% of the radii in 45% of the columns.
# . 3.1 - Update radii Python array per-column, send to graphics RAM.
# - 2,500 (50x50) spheres 55 FPS
# - 10,000 (100x100) spheres 35 FPS
# - 17,424 (132x132) spheres 22.2 FPS
# - 40,000 (200x200) spheres 12.4 FPS
# - 90,000 (300x300) spheres 6.0 FPS
if testCase == 3.1:
# Not buffered, send each column change.
radius = .5
margin = nSpheres / 10
for x in range(margin, nSpheres, 2):
radii = []
for y in range(margin, nSpheres - margin):
t = float(x + y) / (nSpheres + nSpheres
) # 0 to 1 fraction.
# Sphere radii progress from 3/4 to full size.
thisRad = radius * (.75 + t * .25)
phase = pulse + float(x + y) / nSpheres
radii += 8 * [thisRad - .1 + .1 * sin(phase * 2 * pi)]
continue
C_radii = numpy.array(radii, dtype=numpy.float32)
offset = x * nSpheres + margin
test_spheres.radii_vbo.update(offset * 8, C_radii)
continue
pass
# . 3.2 - Numpy buffered in C array, subscript assignments to C.
# - 2,500 (50x50) spheres 48 FPS
# - 10,000 (100x100) spheres 17.4 FPS
# - 17,424 (132x132) spheres 11.2 FPS
# - 40,000 (200x200) spheres 5.5 FPS
# - 90,000 (300x300) spheres 2.5 FPS
elif testCase == 3.2:
# Buffered per-chunk at the C array level.
radius = .5
margin = nSpheres / 10
global C_array
if C_array is None:
# Replicate.
C_array = numpy.zeros((8 * (nSpheres - (2 * margin)), ),
dtype=numpy.float32)
pass
for x in range(margin, nSpheres, 2):
count = 0
for y in range(margin, nSpheres - margin):
t = float(x + y) / (nSpheres + nSpheres
) # 0 to 1 fraction.
# Sphere radii progress from 3/4 to full size.
thisRad = radius * (.75 + t * .25)
phase = pulse + float(x + y) / nSpheres
C_array[count*8:(count+1)*8] = \
thisRad-.1 + .1*sin(phase * 2*pi)
count += 1
continue
offset = x * nSpheres + margin
test_spheres.radii_vbo.update(offset * 8, C_array)
continue
pass
# . 3.3 - updateRadii in Python array, copy via C to graphics RAM.
# - 2,500 (50x50) spheres 57 FPS
# - 10,000 (100x100) spheres 32 FPS
# - 17,424 (132x132) spheres 20 FPS
# - 40,000 (200x200) spheres 10.6 FPS
# - 90,000 (300x300) spheres 4.9 FPS
elif testCase == 3.3:
# Buffered at the Python level, batch the whole-array update.
radius = .5
margin = nSpheres / 10
for x in range(margin, nSpheres, 2):
radii = []
for y in range(margin, nSpheres - margin):
t = float(x + y) / (nSpheres + nSpheres
) # 0 to 1 fraction.
# Sphere radii progress from 3/4 to full size.
thisRad = radius * (.75 + t * .25)
phase = pulse + float(x + y) / nSpheres
radii += [thisRad - .1 + .1 * sin(phase * 2 * pi)]
continue
test_spheres.updateRadii( # Update, but don't send yet.
x * nSpheres + margin,
radii,
send=False)
continue
test_spheres.sendRadii()
pass
# Options: color = [0.0, 1.0, 0.0], transform_id = 1, radius = 1.0
test_spheres.draw()
pass
# NE1 with test toploop, separate sphere VBO/IBO box/shader draws (test case 4)
# . 17,424 spheres (132x132 box/shader draw quads calls) 0.7 FPS
elif testCase == 4:
if test_ibo is None:
print("Test case 4, %d^2 spheres\n %s." %
(nSpheres,
"Separate VBO/IBO shader/box buffer sphere calls, no DL"))
# Collect transformed bounding box vertices and offset indices.
# Start at the lower-left corner, offset so the whole pattern comes
# up centered on the origin.
cubeVerts = drawing_globals.shaderCubeVerts
cubeIndices = drawing_globals.shaderCubeIndices
C_indices = numpy.array(cubeIndices, dtype=numpy.uint32)
test_ibo = GLBufferObject(GL_ELEMENT_ARRAY_BUFFER_ARB, C_indices,
GL_STATIC_DRAW)
test_ibo.unbind()
C_verts = numpy.array(cubeVerts, dtype=numpy.float32)
test_vbo = GLBufferObject(GL_ARRAY_BUFFER_ARB, C_verts,
GL_STATIC_DRAW)
test_vbo.unbind()
pass
else:
drawing_globals.test_sphereShader.configShader(glpane)
glEnableClientState(GL_VERTEX_ARRAY)
test_vbo.bind() # Vertex data comes from the vbo.
glVertexPointer(3, GL_FLOAT, 0, None)
drawing_globals.test_sphereShader.setActive(True)
glDisable(GL_CULL_FACE)
glColor3i(127, 127, 127)
test_ibo.bind() # Index data comes from the ibo.
for x in range(nSpheres):
for y in range(nSpheres):
# From drawsphere_worker_loop().
pos = start_pos + (x+x/10+x/100) * V(1, 0, 0) + \
(y+y/10+y/100) * V(0, 1, 0)
radius = .5
glPushMatrix()
glTranslatef(pos[0], pos[1], pos[2])
glScale(radius, radius, radius)
glDrawElements(GL_QUADS, 6 * 4, GL_UNSIGNED_INT, None)
glPopMatrix()
continue
continue
drawing_globals.test_sphereShader.setActive(False)
glEnable(GL_CULL_FACE)
test_ibo.unbind()
test_vbo.unbind()
glDisableClientState(GL_VERTEX_ARRAY)
pass
# NE1 with test toploop,
# One DL around separate VBO/IBO shader/box buffer sphere calls (test case 5)
# . 17,424 spheres (1 box/shader DL draw call) 9.2 FPS
elif testCase == 5:
if test_dl is None:
print("Test case 5, %d^2 spheres\n %s." % (
nSpheres,
"One DL around separate VBO/IBO shader/box buffer sphere calls"
))
# Collect transformed bounding box vertices and offset indices.
# Start at the lower-left corner, offset so the whole pattern comes
# up centered on the origin.
cubeVerts = drawing_globals.shaderCubeVerts
cubeIndices = drawing_globals.shaderCubeIndices
C_indices = numpy.array(cubeIndices, dtype=numpy.uint32)
test_ibo = GLBufferObject(GL_ELEMENT_ARRAY_BUFFER_ARB, C_indices,
GL_STATIC_DRAW)
test_ibo.unbind()
C_verts = numpy.array(cubeVerts, dtype=numpy.float32)
test_vbo = GLBufferObject(GL_ARRAY_BUFFER_ARB, C_verts,
GL_STATIC_DRAW)
test_vbo.unbind()
# Wrap a display list around the draws.
test_dl = glGenLists(1)
glNewList(test_dl, GL_COMPILE_AND_EXECUTE)
glEnableClientState(GL_VERTEX_ARRAY)
test_vbo.bind() # Vertex data comes from the vbo.
glVertexPointer(3, GL_FLOAT, 0, None)
drawing_globals.test_sphereShader.setActive(True)
glDisable(GL_CULL_FACE)
glColor3i(127, 127, 127)
test_ibo.bind() # Index data comes from the ibo.
for x in range(nSpheres):
for y in range(nSpheres):
# From drawsphere_worker_loop().
pos = start_pos + (x+x/10+x/100) * V(1, 0, 0) + \
(y+y/10+y/100) * V(0, 1, 0)
radius = .5
glPushMatrix()
glTranslatef(pos[0], pos[1], pos[2])
glScale(radius, radius, radius)
glDrawElements(GL_QUADS, 6 * 4, GL_UNSIGNED_INT, None)
glPopMatrix()
continue
continue
drawing_globals.test_sphereShader.setActive(False)
glEnable(GL_CULL_FACE)
test_ibo.unbind()
test_vbo.unbind()
glDisableClientState(GL_VERTEX_ARRAY)
glEndList()
else:
glColor3i(127, 127, 127)
glCallList(test_dl)
pass
pass
# NE1 with test toploop,
# N column DL's around VBO/IBO shader/box buffer sphere calls (test case 6)
# . 2,500 (50x50) spheres 58 FPS
# . 10,000 (100x100) spheres 57 FPS
# . 17,424 (132x132) spheres 56 FPS
# . 40,000 (200x200) spheres 50 FPS
# . 90,000 (300x300) spheres 28 FPS
# . 160,000 (400x400) spheres 16.5 FPS
# . 250,000 (500x500) spheres 3.2 FPS
elif testCase == 6:
if test_dls is None:
print("Test case 6, %d^2 spheres\n %s." %
(nSpheres,
"N col DL's around VBO/IBO shader/box buffer sphere calls"))
# Wrap n display lists around the draws (one per column.)
test_dls = glGenLists(
nSpheres) # Returns ID of first DL in the set.
test_spheres = []
for x in range(nSpheres):
centers = []
radius = .5
radii = []
colors = []
# Each column is relative to its bottom sphere location. Start
# at the lower-left corner, offset so the whole pattern comes up
# centered on the origin.
start_pos = V(0, 0, 0) # So it doesn't get subtracted twice.
pos = sphereLoc(x, 0) - V(nSpheres / 2.0, nSpheres / 2.0, 0)
for y in range(nSpheres):
centers += [sphereLoc(0, y)]
# Sphere radii progress from 3/4 to full size.
t = float(x + y) / (nSpheres + nSpheres
) # 0 to 1 fraction.
thisRad = radius * (.75 + t * .25)
radii += [thisRad]
# Colors progress from red to blue.
colors += [rainbow(t)]
continue
test_sphere = GLSphereBuffer()
test_sphere.addSpheres(centers, radii, colors, None, None)
test_spheres += [test_sphere]
glNewList(test_dls + x, GL_COMPILE_AND_EXECUTE)
glPushMatrix()
glTranslatef(pos[0], pos[1], pos[2])
test_sphere.draw()
glPopMatrix()
glEndList()
continue
pass
else:
shader = drawing_globals.test_sphereShader
shader.configShader(glpane) # Turn the lights on.
for x in range(nSpheres):
glCallList(test_dls + x)
continue
pass
pass
# NE1 with test toploop,
# N column VBO sets of shader/box buffer sphere calls (test case 7)
# . 2,500 (50x50) spheres 50 FPS
# . 10,000 (100x100) spheres 30.5 FPS
# . 17,424 (132x132) spheres 23.5 FPS
# . 40,000 (200x200) spheres 16.8 FPS
# . 90,000 (300x300) spheres 10.8 FPS
# . 160,000 (400x400) spheres 9.1 FPS
# . 250,000 (500x500) spheres 7.3 FPS
elif testCase == 7:
if test_spheres is None:
print("Test case 7, %d^2 spheres\n %s." %
(nSpheres, "Per-column VBO/IBO chunk buffers"))
test_spheres = []
for x in range(nSpheres):
centers = []
radius = .5
radii = []
colors = []
for y in range(nSpheres):
centers += [sphereLoc(x, y)]
# Sphere radii progress from 3/4 to full size.
t = float(x + y) / (nSpheres + nSpheres
) # 0 to 1 fraction.
thisRad = radius * (.75 + t * .25)
radii += [thisRad]
# Colors progress from red to blue.
colors += [rainbow(t)]
continue
_spheres1 = GLSphereBuffer()
_spheres1.addSpheres(centers, radii, colors, None, None)
test_spheres += [_spheres1]
continue
pass
else:
shader = drawing_globals.test_sphereShader
shader.configShader(glpane)
for chunk in test_spheres:
chunk.draw()
pass
# NE1 with test toploop,
# Short chunk VBO sets of shader/box buffer sphere calls (test case 8)
# . 625 (25x25) spheres 30 FPS, 79 chunk buffers of length 8.
# . 2,500 (50x50) spheres 13.6 FPS, 313 chunk buffers of length 8.
# . 10,000 (100x100) spheres 6.4 FPS, 704 chunk buffers of length 8.
# . 10,000 (100x100) spheres 3.3 FPS, 1250 chunk buffers of length 8.
# . 17,424 (132x132) spheres 2.1 FPS, 2178 chunk buffers of length 8.
# . 2,500 (50x50) spheres 33.5 FPS, 105 chunk buffers of length 24.
# . 17,424 (132x132) spheres 5.5 FPS, 726 chunk buffers of length 24.
#
# Subcase 8.1: CSDLs in a DrawingSet. (Initial pass-through version.)
# . 2,500 (50x50) spheres 36.5 FPS, 105 chunk buffers of length 24.
# . 5,625 (75x75) spheres 16.1 FPS, 235 chunk buffers of length 24.
# . 10,000 (100x100) spheres 0.5 FPS?!, 414 chunk buffers of length 24.
# Has to be <= 250 chunks for constant memory transforms?
# . 10,000 (100x100) spheres 11.8 FPS, 50 chunk buffers of length 200.
# After a minute of startup.
# . 10,000 (100x100) spheres 9.3 FPS, 200 chunk buffers of length 50.
# After a few minutes of startup.
# Subcase 8.2: CSDLs in a DrawingSet with transforms. (Pass-through.)
# . 10,000 (100x100) spheres 11.5 FPS, 50 chunk buffers of length 200.
#
# Subcase 8.1: CSDLs in a DrawingSet. (First HunkBuffer version.)
# Measured with auto-rotate on, ignoring startup and occasional outliers.
# As before, on a 2 core, 2.4 GHz Intel MacBook Pro with GeForce 8600M GT.
# HUNK_SIZE = 10000
# . 2,500 (50x50) spheres 140-200 FPS, 105 chunks of length 24.
# . 5,625 (75x75) spheres 155-175 FPS, 235 chunks of length 24.
# . 10,000 (100x100) spheres 134-145 FPS, 50 chunks of length 200.
# . 10,000 (100x100) spheres 130-143 FPS, 200 chunks of length 50.
# . 10,000 (100x100) spheres 131-140 FPS, 1,250 chunks of length 8.
# Chunks are gathered into hunk buffers, so no chunk size speed diff.
# . 17,424 (132x132) spheres 134-140 FPS, 88 chunks of length 200.
# . 17,424 (132x132) spheres 131-140 FPS, 2,178 chunks of length 8.
# HUNK_SIZE = 20000
# . 17,424 (132x132) spheres 131-140 FPS, 88 chunks of length 200.
# . 17,424 (132x132) spheres 130-141 FPS, 2,178 chunks of length 8.
# HUNK_SIZE = 10000
# . 40,000 (200x200) spheres 77.5-82.8 FPS, 5,000 chunks of length 8.
# . 90,000 (300x300) spheres 34.9-42.6 FPS, 11,2500 chunks of length 8.
# Spheres are getting down to pixel size, causing moire patterns.
# Rotate the sphere-array off-axis 45 degrees to minimize.
# (Try adding multi-sampled anti-aliasing, to the drawing test...)
# . 160,000 (400x400) spheres 26.4-27.1 FPS, 20,000 chunks of length 8.
# . 250,000 (500x500) spheres 16.8-17.1 FPS, 31,250 chunks of length 8.
# The pattern is getting too large, far-clipping is setting in.
# . 360,000 (600x600) spheres 11.6-11.8 FPS, 45,000 chunks of length 8.
# Extreme far-clipping in the drawing test pattern.
# HUNK_SIZE = 20000; no significant speed-up.
# . 40,000 (200x200) spheres 75.9-81.5 FPS, 5,000 chunks of length 8.
# . 90,000 (300x300) spheres 41.2-42.4 FPS, 11,250 chunks of length 8.
# Spheres are getting down to pixel size, causing moire patterns.
# . 160,000 (400x400) spheres 26.5-26.9 FPS, 20,000 chunks of length 8.
# . 250,000 (500x500) spheres 16.5-17.1 FPS, 31,250 chunks of length 8.
# . 360,000 (600x600) spheres 11.8-12.1 FPS, 45,000 chunks of length 8.
# HUNK_SIZE = 5000; no significant slowdown or CPU load difference.
# . 40,000 (200x200) spheres 81.0-83.8 FPS, 5,000 chunks of length 8.
# . 160,000 (400x400) spheres 27.3-29.4 FPS, 20,000 chunks of length 8.
# . 360,000 (600x600) spheres 11.7-12.1 FPS, 45,000 chunks of length 8.
#
# Retest after updating MacOS to 10.5.5, with TestGraphics, HUNK_SIZE = 5000
# . 40,000 (200x200) spheres 68.7-74.4 FPS, 5,000 chunks of length 8.
# . 90,000 (300x300) spheres 39.4-42.0 FPS, 11,250 chunks of length 8.
# . 160,000 (400x400) spheres 24.4-25.2 FPS, 20,000 chunks of length 8.
# Retest with glMultiDrawElements drawing indexes in use, HUNK_SIZE = 5000
# . 40,000 (200x200) spheres 52.8-54.4 FPS, 5,000 chunks of length 8.
# . 90,000 (300x300) spheres 22.8-23.3 FPS, 11,250 chunks of length 8.
# . 160,000 (400x400) spheres 13.5-15.2 FPS, 20,000 chunks of length 8.
#
# Retest with reworked halo/sphere shader, HUNK_SIZE = 5000 [setup time]
# . 17,424 (132x132) spheres 52.8-53.7 FPS, 2,178 chunks of length 8. [60]
# . 40,000 (200x200) spheres 29.3-30.4 FPS, 5,000 chunks of length 8.[156]
# . 90,000 (300x300) spheres 18.2-19.2 FPS, 11,250 chunks of length 8.[381]
# . 160,000 (400x400) spheres 10.2-11.6 FPS, 20,000 chunks of length 8.[747]
# Billboard drawing patterns instead of cubes, HUNK_SIZE = 5000 [setup time]
# . 17,424 (132x132) spheres 49.7-55.7 FPS, 2,178 chunks of length 8. [35]
# . 40,000 (200x200) spheres 39.6-40.8 FPS, 5,000 chunks of length 8. [88]
# . 90,000 (300x300) spheres 18.9-19.5 FPS, 11,250 chunks of length 8.[225]
# . 160,000 (400x400) spheres 11.2-11.7 FPS, 20,000 chunks of length 8.[476]
#
elif int(testCase) == 8:
doTransforms = False
doCylinders = False
if test_spheres is None:
# Setup.
print("Test case 8, %d^2 primitives\n %s, length %d." %
(nSpheres, "Short VBO/IBO chunk buffers", chunkLength))
if testCase == 8.1:
print(
"Sub-test 8.1, sphere chunks are in CSDL's in a DrawingSet."
)
test_DrawingSet = DrawingSet()
elif testCase == 8.2:
print("Sub-test 8.2, spheres, rotate with TransformControls.")
test_DrawingSet = DrawingSet()
doTransforms = True
elif testCase == 8.3:
print(
"Sub-test 8.3, cylinder chunks are in CSDL's in a DrawingSet."
)
test_DrawingSet = DrawingSet()
doCylinders = True
pass
if test_DrawingSet:
# note: doesn't happen in test 8.0, which causes a bug then. [bruce 090223 comment]
print "constructed test_DrawingSet =", test_DrawingSet
if USE_GRAPHICSMODE_DRAW:
print("Use graphicsMode.Draw_model for DrawingSet in paintGL.")
pass
t1 = time.time()
if doTransforms:
# Provide several TransformControls to test separate action.
global numTCs, TCs
numTCs = 3
TCs = [TransformControl() for i in range(numTCs)]
pass
def primCSDL(centers, radii, colors):
if not doTransforms:
csdl = ColorSortedDisplayList() # Transformless.
else:
# Test pattern for TransformControl usage - vertical columns
# of TC domains, separated by X coord of first center point.
# Chunking will be visible when transforms are changed.
xCoord = centers[0][0] - start_pos[
0] # Negate centering X.
xPercent = (
xCoord /
(nSpheres + nSpheres / 10 + nSpheres / 100 - 1 +
(nSpheres <= 1)))
xTenth = int(xPercent * 10 + .5)
csdl = ColorSortedDisplayList(TCs[xTenth % numTCs])
pass
# Test selection using the CSDL glname.
ColorSorter.pushName(csdl.glname)
ColorSorter.start(glpane, csdl)
for (color, center, radius) in zip(colors, centers, radii):
if not doCylinders:
# Through ColorSorter to the sphere primitive buffer...
drawsphere(color, center, radius,
DRAWSPHERE_DETAIL_LEVEL)
else:
# Through ColorSorter to cylinder primitive buffer...
if not drawing_globals.cylinderShader_available():
print "warning: not cylinderShader_available(), error is likely:"
if (True and # Whether to do tapered shader-cylinders.
# Display List cylinders don't support taper.
glpane.glprefs.cylinderShader_desired()):
###cylRad = (radius/2.0, (.75-radius)/2.0)
cylRad = (radius / 1.5 - .167, .3 - radius / 1.5)
else:
cylRad = radius / 2.0
pass
endPt2 = center + V(0.5, 0.0, 0.0) # 0.5, -0.5)
drawcylinder(color, center, endPt2, cylRad)
global test_endpoints
test_endpoints += [(center, endPt2)]
pass
continue
ColorSorter.popName()
ColorSorter.finish(draw_now=True)
test_DrawingSet.addCSDL(csdl)
return csdl
if testCase == 8:
#bruce 090223 revised to try to avoid traceback
def chunkFn(centers, radii, colors):
res = GLSphereBuffer()
res.addSpheres(centers, radii, colors, None, None)
return res
pass
else:
chunkFn = primCSDL
pass
test_spheres = []
radius = .5
centers = []
radii = []
colors = []
global test_endpoints
test_endpoints = []
for x in range(nSpheres):
for y in range(nSpheres):
centers += [sphereLoc(x, y)]
# Sphere radii progress from 3/4 to full size.
t = float(x + y) / (nSpheres + nSpheres
) # 0 to 1 fraction.
thisRad = radius * (.5 + t * .5)
radii += [thisRad]
# Colors progress from red to blue.
colors += [rainbow(t)]
# Put out short chunk buffers.
if len(centers) >= chunkLength:
test_spheres += [chunkFn(centers, radii, colors)]
centers = []
radii = []
colors = []
continue
continue
# Remainder fraction buffer.
if len(centers):
test_spheres += [chunkFn(centers, radii, colors)]
pass
print "Setup time", time.time() - t1, "seconds."
print "%d chunk buffers" % len(test_spheres)
pass
elif not initOnly: # Run.
test_Draw_8x(glpane)
pass
elif testCase == 100: #bruce 090102
# before making more of these, modularize it somehow
from commands.TestGraphics.test_selection_redraw import test_selection_redraw
test_class = test_selection_redraw
params = (nSpheres, )
# note: test size is not directly comparable to other tests with same value of nSpheres
if test_Object is None \
or not isinstance(test_Object, test_class) \
or test_Object.current_params() != params: # review: same_vals?
# Setup.
if test_Object:
test_Object.destroy()
test_Object = test_class(*params)
test_Object.activate()
print test_Object
pass
# review: safe to change elif to if? not sure, GL state is only initialized below
elif not initOnly: # Run.
test_Object.draw_complete()
pass
pass
if not initOnly:
glMatrixMode(GL_MODELVIEW)
glFlush()
pass
first_time = False
return
