def create_ui(self):
vl = VLayout(3)
self.setLayout(vl)
# Banner
banner = QLabel()
banner.setPixmap(QPixmap(':/banner.png'))
vl.addWidget(banner)
# Port groupbox
gbPort = GroupBoxH('Selecionar porta', 3)
self.cbxPort = QComboBox()
pbRefreshPorts = QPushButton('Atualizar')
gbPort.addWidget(self.cbxPort)
gbPort.addWidget(pbRefreshPorts)
gbPort.layout().setStretch(0, 4)
gbPort.layout().setStretch(1, 1)
# Buttons
self.flash = QPushButton('Gravar firmware!')
self.flash.setFixedHeight(60)
self.flash.setStyleSheet('background-color: #0D2556;')
hl_btns = HLayout([50, 3, 50, 3])
hl_btns.addWidgets([self.flash])
vl.addWidgets([gbPort])
vl.addLayout(hl_btns)
pbRefreshPorts.clicked.connect(self.refreshPorts)
self.flash.clicked.connect(self.start_process)
def __init__(self, parent):
super().__init__()
self.setWindowTitle("Flashing...")
esptool.sw.read_start.connect(self.read_start)
esptool.sw.read_progress.connect(self.read_progress)
esptool.sw.read_finished.connect(self.read_finished)
esptool.sw.erase_start.connect(self.erase_start)
esptool.sw.erase_finished.connect(self.erase_finished)
esptool.sw.write_start.connect(self.write_start)
esptool.sw.write_progress.connect(self.write_progress)
esptool.sw.write_finished.connect(self.write_finished)
self.setFixedWidth(400)
self.nrBinFile = QNetworkRequest()
self.parent = parent
vl = VLayout(10, 10)
self.setLayout(vl)
self.bin_data = b""
self.error_msg = None
self.progress_task = QProgressBar()
self.progress_task.setFixedHeight(45)
self.task = QLabel()
self.erase_timer = QTimer()
self.erase_timer.setSingleShot(False)
self.erase_timer.timeout.connect(self.erase_progress)
self.btns = QDialogButtonBox(QDialogButtonBox.Abort)
self.dlgText = QLabel(
"Press the Boot button for a few seconds to start the flashing process"
)
vl.addWidgets([self.dlgText, self.task, self.progress_task, self.btns])
self.btns.rejected.connect(self.abort)
# process starts
self.bin_file = parent.bin_file
self.run_esptool()
def __init__(self, parent):
super().__init__()
self.setWindowTitle("Tasmotizing...")
esptool.sw.read_start.connect(self.read_start)
esptool.sw.read_progress.connect(self.read_progress)
esptool.sw.read_finished.connect(self.read_finished)
esptool.sw.erase_start.connect(self.erase_start)
esptool.sw.erase_finished.connect(self.erase_finished)
esptool.sw.write_start.connect(self.write_start)
esptool.sw.write_progress.connect(self.write_progress)
esptool.sw.write_finished.connect(self.write_finished)
self.setFixedWidth(400)
self.nrBinFile = QNetworkRequest()
self.parent = parent
vl = VLayout(10, 10)
self.setLayout(vl)
self.bin_data = b""
self.error_msg = None
self.progress_task = QProgressBar()
self.progress_task.setFixedHeight(45)
self.task = QLabel()
self.erase_timer = QTimer()
self.erase_timer.setSingleShot(False)
self.erase_timer.timeout.connect(self.erase_progress)
self.btns = QDialogButtonBox(QDialogButtonBox.Abort)
vl.addWidgets([
QLabel("Tasmotizing in progress..."), self.task,
self.progress_task, self.btns
])
self.btns.rejected.connect(self.abort)
# process starts
if parent.mode in (1, 2):
self.bin_file = parent.cbHackboxBin.currentData().split(";")[1]
self.nrBinFile.setUrl(
QUrl(parent.cbHackboxBin.currentData().split(";")[0]))
self.bin_reply = parent.nam.get(self.nrBinFile)
self.task.setText("Downloading binary from thehackbox.org...")
self.bin_reply.readyRead.connect(self.appendBinFile)
self.bin_reply.downloadProgress.connect(self.updateBinProgress)
self.bin_reply.finished.connect(self.saveBinFile)
else:
self.bin_file = parent.bin_file
self.run_esptool()
def createUI(self):
vl = VLayout()
self.setLayout(vl)
# Port groupbox
gbPort = GroupBoxH("Select port", 3)
self.cbxPort = QComboBox()
pbRefreshPorts = QPushButton("Refresh")
gbPort.addWidget(self.cbxPort)
gbPort.addWidget(pbRefreshPorts)
gbPort.layout().setStretch(0, 4)
gbPort.layout().setStretch(1, 1)
# Firmware groupbox
gbFW = GroupBoxV("Select image", 3)
self.wFile = QWidget()
hl_file = HLayout(0)
self.file = QLineEdit()
self.file.setReadOnly(True)
self.file.setText(self.bin_file)
pbFile = QPushButton("Open")
hl_file.addWidgets([self.file, pbFile])
self.wFile.setLayout(hl_file)
gbFW.addWidgets([self.wFile])
# Buttons
self.pbFlash = QPushButton("Flash!")
self.pbFlash.setFixedHeight(50)
self.pbFlash.setStyleSheet("background-color: #223579;")
self.pbConfig = QPushButton("Setup WIFI")
self.pbConfig.setStyleSheet("background-color: #571054;")
self.pbConfig.setFixedHeight(50)
self.pbQuit = QPushButton("Quit")
self.pbQuit.setStyleSheet("background-color: #c91017;")
self.pbQuit.setFixedSize(QSize(50, 50))
hl_btns = HLayout([50, 3, 50, 3])
hl_btns.addWidgets([self.pbFlash, self.pbConfig, self.pbQuit])
vl.addWidgets([gbPort, gbFW])
vl.addLayout(hl_btns)
pbRefreshPorts.clicked.connect(self.refreshPorts)
pbFile.clicked.connect(self.openBinFile)
self.pbFlash.clicked.connect(self.start_process)
self.pbConfig.clicked.connect(self.send_config)
self.pbQuit.clicked.connect(self.reject)
def createUI(self):
vl = VLayout()
self.setLayout(vl)
# Wifi groupbox
self.gbWifi = QGroupBox("WiFi")
self.gbWifi.setCheckable(False)
flWifi = QFormLayout()
self.leAP = QLineEdit()
self.leAPPwd = QLineEdit()
self.leAPPwd.setEchoMode(QLineEdit.Password)
flWifi.addRow("SSID", self.leAP)
flWifi.addRow("Password", self.leAPPwd)
self.gbWifi.setLayout(flWifi)
vl_wifis = VLayout(0)
vl_wifis.addWidgets([self.gbWifi])
hl_wifis_mqtt = HLayout(0)
hl_wifis_mqtt.addLayout(vl_wifis)
vl.addLayout(hl_wifis_mqtt)
btns = QDialogButtonBox(QDialogButtonBox.Save | QDialogButtonBox.Close)
btns.accepted.connect(self.accept)
btns.rejected.connect(self.reject)
vl.addWidget(btns)
def createUI(self):
vl = VLayout()
self.setLayout(vl)
# Banner
banner = QLabel()
banner.setPixmap(QPixmap(":/banner.png"))
vl.addWidget(banner)
# Port groupbox
gbPort = GroupBoxH("Select port", 3)
self.cbxPort = QComboBox()
pbRefreshPorts = QPushButton("Refresh")
gbPort.addWidget(self.cbxPort)
gbPort.addWidget(pbRefreshPorts)
gbPort.layout().setStretch(0, 4)
gbPort.layout().setStretch(1, 1)
# Firmware groupbox
gbFW = GroupBoxV("Select image", 3)
hl_rb = HLayout(0)
rbFile = QRadioButton("BIN file")
self.rbRelease = QRadioButton("Release")
self.rbRelease.setEnabled(False)
self.rbDev = QRadioButton("Development")
self.rbDev.setEnabled(False)
rbgFW = QButtonGroup(gbFW)
rbgFW.addButton(rbFile, 0)
rbgFW.addButton(self.rbRelease, 1)
rbgFW.addButton(self.rbDev, 2)
hl_rb.addWidgets([rbFile, self.rbRelease, self.rbDev])
gbFW.addLayout(hl_rb)
self.wFile = QWidget()
hl_file = HLayout(0)
self.file = QLineEdit()
self.file.setReadOnly(True)
self.file.setPlaceholderText("Click 'Open' to select the image")
pbFile = QPushButton("Open")
hl_file.addWidgets([self.file, pbFile])
self.wFile.setLayout(hl_file)
self.cbHackboxBin = QComboBox()
self.cbHackboxBin.setVisible(False)
self.cbHackboxBin.setEnabled(False)
self.cbBackup = QCheckBox("Backup original firmware")
self.cbBackup.setToolTip(
"Firmware backup is ESPECIALLY recommended when you flash a Sonoff, Tuya, Shelly etc. for the first time.\nWithout a backup you won't be able to restore the original functionality."
)
self.cbErase = QCheckBox("Erase before flashing")
self.cbErase.setToolTip(
"Erasing previous firmware ensures all flash regions are clean for Tasmota, which prevents many unexpected issues.\nIf unsure, leave enabled."
)
self.cbErase.setChecked(True)
gbFW.addWidgets(
[self.wFile, self.cbHackboxBin, self.cbBackup, self.cbErase])
# Buttons
self.pbTasmotize = QPushButton("Tasmotize!")
self.pbTasmotize.setFixedHeight(50)
self.pbTasmotize.setStyleSheet("background-color: #223579;")
self.pbConfig = QPushButton("Send config")
self.pbConfig.setStyleSheet("background-color: #571054;")
self.pbConfig.setFixedHeight(50)
self.pbQuit = QPushButton("Quit")
self.pbQuit.setStyleSheet("background-color: #c91017;")
self.pbQuit.setFixedSize(QSize(50, 50))
hl_btns = HLayout([50, 3, 50, 3])
hl_btns.addWidgets([self.pbTasmotize, self.pbConfig, self.pbQuit])
vl.addWidgets([gbPort, gbFW])
vl.addLayout(hl_btns)
pbRefreshPorts.clicked.connect(self.refreshPorts)
rbgFW.buttonClicked[int].connect(self.setBinMode)
rbFile.setChecked(True)
pbFile.clicked.connect(self.openBinFile)
self.pbTasmotize.clicked.connect(self.start_process)
self.pbConfig.clicked.connect(self.send_config)
self.pbQuit.clicked.connect(self.reject)
def createUI(self):
vl = VLayout()
self.setLayout(vl)
# Wifi groupbox
self.gbWifi = QGroupBox("WiFi")
self.gbWifi.setCheckable(True)
self.gbWifi.setChecked(False)
flWifi = QFormLayout()
self.leAP = QLineEdit()
self.leAPPwd = QLineEdit()
self.leAPPwd.setEchoMode(QLineEdit.Password)
flWifi.addRow("SSID", self.leAP)
flWifi.addRow("Password", self.leAPPwd)
self.gbWifi.setLayout(flWifi)
# Recovery Wifi groupbox
self.gbRecWifi = QGroupBox("Recovery WiFi")
self.gbRecWifi.setCheckable(True)
self.gbRecWifi.setChecked(False)
flRecWifi = QFormLayout()
lbRecAP = QLabel("Recovery")
lbRecAP.setAlignment(Qt.AlignVCenter | Qt.AlignRight)
lbRecAPPwd = QLabel("a1b2c3d4")
lbRecAPPwd.setAlignment(Qt.AlignVCenter | Qt.AlignRight)
flRecWifi.addRow("SSID", lbRecAP)
flRecWifi.addRow("Password", lbRecAPPwd)
self.gbRecWifi.setLayout(flRecWifi)
vl_wifis = VLayout(0)
vl_wifis.addWidgets([self.gbWifi, self.gbRecWifi])
# MQTT groupbox
self.gbMQTT = QGroupBox("MQTT")
self.gbMQTT.setCheckable(True)
self.gbMQTT.setChecked(False)
flMQTT = QFormLayout()
self.leBroker = QLineEdit()
self.sbPort = SpinBox()
self.sbPort.setValue(1883)
self.leTopic = QLineEdit()
self.leTopic.setText("tasmota")
self.leFullTopic = QLineEdit()
self.leFullTopic.setText("%prefix%/%topic%/")
self.leFriendlyName = QLineEdit()
self.leMQTTUser = QLineEdit()
self.leMQTTPass = QLineEdit()
self.leMQTTPass.setEchoMode(QLineEdit.Password)
flMQTT.addRow("Host", self.leBroker)
flMQTT.addRow("Port", self.sbPort)
flMQTT.addRow("Topic", self.leTopic)
flMQTT.addRow("FullTopic", self.leFullTopic)
flMQTT.addRow("FriendlyName", self.leFriendlyName)
flMQTT.addRow("User [optional]", self.leMQTTUser)
flMQTT.addRow("Password [optional]", self.leMQTTPass)
self.gbMQTT.setLayout(flMQTT)
# Module/template groupbox
self.gbModule = GroupBoxV("Module/template")
self.gbModule.setCheckable(True)
self.gbModule.setChecked(False)
hl_m_rb = HLayout()
self.rbModule = QRadioButton("Module")
self.rbModule.setChecked(True)
self.rbTemplate = QRadioButton("Template")
hl_m_rb.addWidgets([self.rbModule, self.rbTemplate])
self.rbgModule = QButtonGroup(self.gbModule)
self.rbgModule.addButton(self.rbModule, 0)
self.rbgModule.addButton(self.rbTemplate, 1)
self.cbModule = QComboBox()
for mod_id, mod_name in modules.items():
self.cbModule.addItem(mod_name, mod_id)
self.leTemplate = QLineEdit()
self.leTemplate.setPlaceholderText("Paste template string here")
self.leTemplate.setVisible(False)
self.gbModule.addLayout(hl_m_rb)
self.gbModule.addWidgets([self.cbModule, self.leTemplate])
self.rbgModule.buttonClicked[int].connect(self.setModuleMode)
# layout all widgets
hl_wifis_mqtt = HLayout(0)
hl_wifis_mqtt.addLayout(vl_wifis)
hl_wifis_mqtt.addWidget(self.gbMQTT)
vl.addLayout(hl_wifis_mqtt)
vl.addWidget(self.gbModule)
btns = QDialogButtonBox(QDialogButtonBox.Save | QDialogButtonBox.Close)
btns.accepted.connect(self.accept)
btns.rejected.connect(self.reject)
vl.addWidget(btns)
def create_ui(self):
vl = VLayout(5)
self.setLayout(vl)
# Banner
banner = QLabel()
banner.setPixmap(QPixmap(':/banner.png'))
vl.addWidget(banner)
# Port groupbox
gbPort = GroupBoxH('Select port', 3)
self.cbxPort = QComboBox()
pbRefreshPorts = QPushButton('Refresh')
gbPort.addWidget(self.cbxPort)
gbPort.addWidget(pbRefreshPorts)
gbPort.layout().setStretch(0, 4)
gbPort.layout().setStretch(1, 1)
# Firmware groupbox
gbFW = GroupBoxV('Select image', 3)
hl_rb = HLayout(0)
rbFile = QRadioButton('BIN file')
self.rbRelease = QRadioButton('Release')
self.rbRelease.setEnabled(False)
self.rbDev = QRadioButton('Development')
self.rbDev.setEnabled(False)
self.rbgFW = QButtonGroup(gbFW)
self.rbgFW.addButton(rbFile, 0)
self.rbgFW.addButton(self.rbRelease, 1)
self.rbgFW.addButton(self.rbDev, 2)
hl_rb.addWidgets([rbFile, self.rbRelease, self.rbDev])
gbFW.addLayout(hl_rb)
self.wFile = QWidget()
hl_file = HLayout(0)
self.file = QLineEdit()
self.file.setReadOnly(True)
self.file.setPlaceholderText('Click "Open" to select the image')
pbFile = QPushButton('Open')
hl_file.addWidgets([self.file, pbFile])
self.wFile.setLayout(hl_file)
self.cbHackboxBin = QComboBox()
self.cbHackboxBin.setVisible(False)
self.cbHackboxBin.setEnabled(False)
self.cbSelfReset = QCheckBox('Self-resetting device (NodeMCU, Wemos)')
self.cbSelfReset.setToolTip(
'Check if your device has self-resetting capabilities supported by esptool'
)
gbBackup = GroupBoxV('Backup')
self.cbBackup = QCheckBox('Save original firmware')
self.cbBackup.setToolTip(
'Firmware backup is ESPECIALLY recommended when you flash a Sonoff, Tuya, Shelly etc. for the first time.\nWithout a backup you will not be able to restore the original functionality.'
)
self.cbxBackupSize = QComboBox()
self.cbxBackupSize.addItems([f'{2 ** s}MB' for s in range(5)])
self.cbxBackupSize.setEnabled(False)
hl_backup_size = HLayout(0)
hl_backup_size.addWidgets([QLabel('Flash size:'), self.cbxBackupSize])
hl_backup_size.setStretch(0, 3)
hl_backup_size.setStretch(1, 1)
gbBackup.addWidget(self.cbBackup)
gbBackup.addLayout(hl_backup_size)
self.cbErase = QCheckBox('Erase before flashing')
self.cbErase.setToolTip(
'Erasing previous firmware ensures all flash regions are clean for Tasmota, which prevents many unexpected issues.\nIf unsure, leave enabled.'
)
self.cbErase.setChecked(True)
gbFW.addWidgets(
[self.wFile, self.cbHackboxBin, self.cbSelfReset, self.cbErase])
# Buttons
self.pbTasmotize = QPushButton('Upload tinyGS firmware!')
self.pbTasmotize.setFixedHeight(50)
self.pbTasmotize.setStyleSheet('background-color: #223579;')
self.pbConfig = QPushButton('Send config')
self.pbConfig.setStyleSheet('background-color: #571054;')
self.pbConfig.setFixedHeight(50)
self.pbGetIP = QPushButton('Get IP')
self.pbGetIP.setFixedSize(QSize(75, 50))
self.pbGetIP.setStyleSheet('background-color: #2a8a26;')
self.pbQuit = QPushButton('Quit')
self.pbQuit.setStyleSheet('background-color: #c91017;')
self.pbQuit.setFixedSize(QSize(50, 50))
hl_btns = HLayout([50, 3, 50, 3])
hl_btns.addWidgets([self.pbTasmotize])
vl.addWidgets([gbPort])
vl.addLayout(hl_btns)
pbRefreshPorts.clicked.connect(self.refreshPorts)
self.rbgFW.buttonClicked[int].connect(self.setBinMode)
rbFile.setChecked(True)
pbFile.clicked.connect(self.openBinFile)
self.cbBackup.toggled.connect(self.cbxBackupSize.setEnabled)
self.pbTasmotize.clicked.connect(self.start_process)
self.pbConfig.clicked.connect(self.send_config)
self.pbGetIP.clicked.connect(self.get_ip)
self.pbQuit.clicked.connect(self.reject)