def popwindow(self):
self.gviz=gviz.window([],
build_dimensions=self.build_dimensions_list,
grid=(10,50),
extrusion_width=0.5)
#self.gviz.showall=1
self.gwindow=gviz.window([],
build_dimensions=self.build_dimensions_list,
grid=(10,50),
extrusion_width=0.5)
#self.gviz.Bind(wx.EVT_LEFT_DOWN,self.showwin)
self.gviz.Bind(wx.EVT_CLOSE,lambda x:self.gwindow.Hide())
#self.gviz.Bind(wx.EVT_LEFT_DOWN,self.showwin)
self.loadbtn=wx.Button(self.panel,-1,"Load file")
self.loadbtn.Bind(wx.EVT_BUTTON,self.loadfile)
vcs=wx.BoxSizer(wx.VERTICAL)
vcs.Add(self.loadbtn)
vcs.Add(self.gviz,1,flag=wx.SHAPED)
self.panel.SetSizer(vcs)
self.status=self.CreateStatusBar()
def popwindow(self):
# sizer layout: topsizer is a column sizer containing two sections
# upper section contains the mini view buttons
# lower section contains the rest of the window - manual controls, console, visualizations
# TOP ROW:
uts = self.uppertopsizer = wx.BoxSizer(wx.HORIZONTAL)
uts.Add(wx.StaticText(self.panel, -1, "Port:", pos=(0, 5)), wx.TOP | wx.LEFT, 5)
scan = self.scanserial()
self.serialport = wx.ComboBox(self.panel, -1, choices=scan, style=wx.CB_DROPDOWN | wx.CB_SORT, pos=(50, 0))
try:
self.serialport.SetValue(scan[0])
if self.settings.port:
self.serialport.SetValue(self.settings.port)
except:
pass
uts.Add(self.serialport)
uts.Add(wx.StaticText(self.panel, -1, "@", pos=(250, 5)), wx.RIGHT, 5)
self.baud = wx.ComboBox(
self.panel,
-1,
choices=["2400", "9600", "19200", "38400", "57600", "115200"],
style=wx.CB_DROPDOWN | wx.CB_SORT,
size=(110, 30),
pos=(275, 0),
)
try:
self.baud.SetValue("115200")
self.baud.SetValue(str(self.settings.baudrate))
except:
pass
uts.Add(self.baud)
self.connectbtn = wx.Button(self.panel, -1, "Connect", pos=(380, 0))
uts.Add(self.connectbtn)
self.connectbtn.SetToolTipString("Connect to the printer")
self.connectbtn.Bind(wx.EVT_BUTTON, self.connect)
self.disconnectbtn = wx.Button(self.panel, -1, "Disconnect", pos=(470, 0))
self.disconnectbtn.Bind(wx.EVT_BUTTON, self.disconnect)
uts.Add(self.disconnectbtn)
self.resetbtn = wx.Button(self.panel, -1, "Reset", pos=(560, 0))
self.resetbtn.Bind(wx.EVT_BUTTON, self.reset)
uts.Add(self.resetbtn)
self.minibtn = wx.Button(self.panel, -1, "Mini mode", pos=(690, 0))
self.minibtn.Bind(wx.EVT_BUTTON, self.toggleview)
uts.Add((10, -1))
self.monitorbox = wx.CheckBox(self.panel, -1, "", pos=(450, 37))
uts.Add((15, -1))
uts.Add(self.monitorbox)
uts.Add(wx.StaticText(self.panel, -1, "Monitor\nprinter", pos=(470, 37)))
self.monitorbox.Bind(wx.EVT_CHECKBOX, self.setmonitor)
uts.Add((15, -1), flag=wx.EXPAND)
uts.Add(self.minibtn)
# SECOND ROW
ubs = self.upperbottomsizer = wx.BoxSizer(wx.HORIZONTAL)
self.loadbtn = wx.Button(self.panel, -1, "Load file", pos=(0, 40))
self.loadbtn.Bind(wx.EVT_BUTTON, self.loadfile)
ubs.Add(self.loadbtn)
self.uploadbtn = wx.Button(self.panel, -1, "SD Upload", pos=(90, 40))
self.uploadbtn.Bind(wx.EVT_BUTTON, self.upload)
ubs.Add(self.uploadbtn)
self.sdprintbtn = wx.Button(self.panel, -1, "SD Print", pos=(180, 40))
self.sdprintbtn.Bind(wx.EVT_BUTTON, self.sdprintfile)
ubs.Add(self.sdprintbtn)
self.printbtn = wx.Button(self.panel, -1, "Print", pos=(270, 40))
self.printbtn.Bind(wx.EVT_BUTTON, self.printfile)
ubs.Add(self.printbtn)
self.pausebtn = wx.Button(self.panel, -1, "Pause", pos=(360, 40))
self.pausebtn.Bind(wx.EVT_BUTTON, self.pause)
ubs.Add(self.pausebtn)
ubs.Add((50, -1), flag=wx.EXPAND)
try:
for i in self.custombuttons[:4]:
if i is None:
continue
b = wx.Button(self.panel, -1, i[0])
b.properties = i
b.SetBackgroundColour(i[2])
b.Bind(wx.EVT_BUTTON, self.procbutton)
ubs.Add(b)
except:
pass
# Right full view
lrs = self.lowerrsizer = wx.BoxSizer(wx.VERTICAL)
self.logbox = wx.TextCtrl(self.panel, size=(350, 340), pos=(440, 75), style=wx.TE_MULTILINE)
self.logbox.SetEditable(0)
lrs.Add(self.logbox)
lbrs = wx.BoxSizer(wx.HORIZONTAL)
self.commandbox = wx.TextCtrl(self.panel, size=(250, 30), pos=(440, 420), style=wx.TE_PROCESS_ENTER)
self.commandbox.Bind(wx.EVT_TEXT_ENTER, self.sendline)
lbrs.Add(self.commandbox)
self.sendbtn = wx.Button(self.panel, -1, "Send", pos=(700, 420))
self.sendbtn.Bind(wx.EVT_BUTTON, self.sendline)
lbrs.Add(self.sendbtn)
lrs.Add(lbrs)
# left pane
lls = self.lowerlsizer = wx.GridBagSizer()
lls.Add(wx.StaticText(self.panel, -1, "mm/min", pos=(60, 69)), pos=(0, 4), span=(1, 4))
self.xyfeedc = wx.SpinCtrl(
self.panel, -1, str(self.settings.xy_feedrate), min=0, max=50000, size=(60, 25), pos=(25, 83)
)
lls.Add(wx.StaticText(self.panel, -1, "XY:", pos=(2, 90 - 2)), pos=(1, 0), span=(1, 2))
lls.Add(self.xyfeedc, pos=(1, 2), span=(1, 4))
lls.Add(wx.StaticText(self.panel, -1, "Z:", pos=(90, 90 - 2)), pos=(1, 6), span=(1, 2))
self.zfeedc = wx.SpinCtrl(
self.panel, -1, str(self.settings.z_feedrate), min=0, max=50000, size=(60, 25), pos=(105, 83)
)
lls.Add(self.zfeedc, pos=(1, 8), span=(1, 4))
# lls.Add((200,375))
for i in self.cpbuttons:
btn = wx.Button(self.panel, -1, i[0]) # ,size=(60,-1))
btn.SetBackgroundColour(i[3])
btn.SetForegroundColour("black")
btn.properties = i
btn.Bind(wx.EVT_BUTTON, self.procbutton)
self.btndict[i[1]] = btn
lls.Add(btn, pos=i[2], span=i[4])
lls.Add(wx.StaticText(self.panel, -1, "Heater:", pos=(0, 343)), pos=(11, 0), span=(1, 1))
self.htemp = wx.ComboBox(
self.panel,
-1,
choices=[self.temps[i] + " (" + i + ")" for i in sorted(self.temps.keys())],
style=wx.CB_DROPDOWN,
size=(90, 25),
pos=(45, 337),
)
self.htemp.SetValue("0")
lls.Add(self.htemp, pos=(11, 1), span=(1, 3))
self.settbtn = wx.Button(self.panel, -1, "Set", size=(30, -1), pos=(135, 335))
self.settbtn.Bind(wx.EVT_BUTTON, self.do_settemp)
lls.Add(self.settbtn, pos=(11, 4), span=(1, 2))
lls.Add(wx.StaticText(self.panel, -1, "Bed:", pos=(0, 343)), pos=(12, 0), span=(1, 1))
self.btemp = wx.ComboBox(
self.panel,
-1,
choices=[self.bedtemps[i] + " (" + i + ")" for i in sorted(self.temps.keys())],
style=wx.CB_DROPDOWN,
size=(90, 25),
pos=(45, 367),
)
self.btemp.SetValue("0")
lls.Add(self.btemp, pos=(12, 1), span=(1, 3))
self.setbbtn = wx.Button(self.panel, -1, "Set", size=(30, -1), pos=(135, 365))
self.setbbtn.Bind(wx.EVT_BUTTON, self.do_bedtemp)
lls.Add(self.setbbtn, pos=(12, 4), span=(1, 2))
self.tempdisp = wx.StaticText(self.panel, -1, "")
lls.Add(self.tempdisp, pos=(12, 6), span=(1, 3))
self.edist = wx.SpinCtrl(self.panel, -1, "5", min=0, max=1000, size=(60, 25), pos=(70, 398))
self.edist.SetBackgroundColour((225, 200, 200))
self.edist.SetForegroundColour("black")
lls.Add(self.edist, pos=(13, 3), span=(1, 2))
lls.Add(wx.StaticText(self.panel, -1, "mm", pos=(130, 407)), pos=(13, 5), span=(1, 2))
self.efeedc = wx.SpinCtrl(
self.panel, -1, str(self.settings.e_feedrate), min=0, max=50000, size=(60, 25), pos=(70, 397 + 28)
)
self.efeedc.SetBackgroundColour((225, 200, 200))
self.efeedc.SetForegroundColour("black")
self.efeedc.Bind(wx.EVT_SPINCTRL, self.setfeeds)
lls.Add(self.efeedc, pos=(14, 3), span=(1, 2))
lls.Add(wx.StaticText(self.panel, -1, "mm/min", pos=(130, 407 + 27)), pos=(14, 5), span=(1, 2))
self.xyfeedc.Bind(wx.EVT_SPINCTRL, self.setfeeds)
self.zfeedc.Bind(wx.EVT_SPINCTRL, self.setfeeds)
self.zfeedc.SetBackgroundColour((180, 255, 180))
self.zfeedc.SetForegroundColour("black")
lls.Add((10, 0), pos=(0, 11), span=(1, 1))
self.gviz = gviz.gviz(self.panel, (300, 300), (200, 200))
self.gviz.showall = 1
self.gwindow = gviz.window([])
self.gviz.Bind(wx.EVT_LEFT_DOWN, self.showwin)
self.gwindow.Bind(wx.EVT_CLOSE, lambda x: self.gwindow.Hide())
cs = wx.GridBagSizer()
cs.Add(self.gviz, pos=(0, 0), span=(1, 3))
posindex = 0
try:
for i in self.custombuttons[4:]:
if i is None:
continue
b = wx.Button(self.panel, -1, i[0])
b.properties = i
b.SetBackgroundColour(i[2])
b.Bind(wx.EVT_BUTTON, self.procbutton)
cs.Add(b, pos=(1 + posindex / 3, posindex % 3), span=(1, 1))
posindex += 1
except:
pass
lls.Add(cs, pos=(0, 10), span=(15, 1))
self.uppersizer = wx.BoxSizer(wx.VERTICAL)
self.uppersizer.Add(self.uppertopsizer)
self.uppersizer.Add(self.upperbottomsizer)
self.lowersizer = wx.BoxSizer(wx.HORIZONTAL)
self.lowersizer.Add(lls)
self.lowersizer.Add(lrs)
self.topsizer = wx.BoxSizer(wx.VERTICAL)
self.topsizer.Add(self.uppersizer)
self.topsizer.Add(self.lowersizer)
self.panel.SetSizer(self.topsizer)
self.status = self.CreateStatusBar()
self.status.SetStatusText("Not connected to printer.")
self.Bind(wx.EVT_CLOSE, self.kill)
self.topsizer.Layout()
self.topsizer.Fit(self)
