def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ["HARPIA_DATA_DIR"]
filename = self.m_sDataDir + "glade/equalizeHistogram.ui"
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = ["Properties", "BackgroundColor", "BorderColor", "HelpView"]
handlers = [
# 'on_EQUARadioAutomatic_pressed',
# 'on_EQUARadioBand_pressed',
"on_BackColorButton_clicked",
"on_BorderColorButton_clicked",
"on_cancel_clicked",
"on_equalizeHistogram_confirm_clicked",
]
top_window = "Properties"
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/equalizeHistogram" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets["HelpView"].set_buffer(t_oTextBuffer)
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/sobel.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'SOBEXOrder',
'SOBEYOrder',
'SOBEMaskSize',
'BackgroundColor',
'BorderColor',
'HelpView'
]
handlers = [
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked',
'on_cancel_clicked',
'on_sobel_confirm_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
self.OrderLimit = 6
# load properties values
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
if Property.name == "xorder":
self.widgets['SOBEXOrder'].set_value(int(Property.value))
if Property.name == "yorder":
self.widgets['SOBEYOrder'].set_value(int(Property.value))
if Property.name == "masksize":
if Property.value == "1":
self.widgets['SOBEMaskSize'].set_active(int(0))
if Property.value == "3":
self.widgets['SOBEMaskSize'].set_active(int(1))
if Property.value == "5":
self.widgets['SOBEMaskSize'].set_active(int(2))
if Property.value == "7":
self.widgets['SOBEMaskSize'].set_active(int(3))
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/sobel" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def load(cls, file_name):
"""
This method loads the port from XML file.
Returns:
* **Types** (:class:`boolean<boolean>`)
"""
# load the port
if os.path.exists(file_name) is False:
return
parser = XMLParser(file_name)
if parser.getTag("HarpiaPort") is None:
return None
port = Port()
port.type = parser.getTagAttr("HarpiaPort", "type")
port.language = parser.getTagAttr("HarpiaPort", "language")
port.label = parser.getTagAttr("HarpiaPort", "label")
port.color = parser.getTagAttr("HarpiaPort", "color")
port.multiple = parser.getTagAttr("HarpiaPort", "multiple")
port.source = parser.getTagAttr("HarpiaPort", "source")
port.code = parser.getTag("HarpiaPort").getTag("code").getText()
count = 0
for code in port.input_codes:
port.input_codes[count] = parser.getTag('HarpiaPort').getTag('input_code' + str(count)).getText()
port.output_codes[count] = parser.getTag('HarpiaPort').getTag('output_code' + str(count)).getText()
count = count + 1
if port.type == "":
return None
return port
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/division.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'BackgroundColor',
'BorderColor',
'HelpView'
]
handlers = [
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked',
'on_cancel_clicked',
'on_division_confirm_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/division" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/findSquares.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'BackgroundColor',
'BorderColor',
'HelpView',
'minVal',
'maxVal',
'enMin',
'enMax',
'prop_confirm'
]
handlers = [
'on_cancel_clicked',
'on_prop_confirm_clicked',
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked',
'on_enMin_toggled',
'on_enMax_toggled'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
name = Property.getAttr("name")
value = Property.getAttr("value")
if name == "minVal":
self.widgets['minVal'].set_value(int(float(value)))
if name == "maxVal":
self.widgets['maxVal'].set_value(int(float(value)))
if name == "enMin":
self.widgets['enMin'].set_active(value == 'True')
if name == "enMax":
self.widgets['enMax'].set_active(value == 'True')
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + 'help/findSquares' + _('_en.help'))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/erode.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'ERODMaskSize',
'ERODIterations',
'BackgroundColor',
'BorderColor',
'HelpView',
'erode_confirm'
]
handlers = [
'on_cancel_clicked',
'on_erode_confirm_clicked',
'on_BorderColorButton_clicked',
'on_BackColorButton_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
# load properties values
for Property in self.block_properties:
name = Property.getAttr("name")
value = Property.getAttr("value")
if name == "masksize":
if value == "3x3":
self.widgets['ERODMaskSize'].set_active(int(0))
if value == "5x5":
self.widgets['ERODMaskSize'].set_active(int(1))
if value == "7x7":
self.widgets['ERODMaskSize'].set_active(int(2))
if name == "iterations":
self.widgets['ERODIterations'].set_value(int(value))
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/erode" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def load(cls, file_name):
"""
This method loads the code_template from XML file.
Returns:
* **Types** (:class:`boolean<boolean>`)
"""
# load the code_template
if os.path.exists(file_name) is False:
return
parser = XMLParser(file_name)
if parser.getTag("HarpiaCodeTemplate") is None:
return None
try:
code_template = CodeTemplate()
code_template.name = parser.getTagAttr("HarpiaCodeTemplate", "name")
code_template.type = parser.getTagAttr("HarpiaCodeTemplate", "type")
code_template.description = parser.getTagAttr("HarpiaCodeTemplate", "description")
code_template.language = parser.getTagAttr("HarpiaCodeTemplate", "language")
code_template.extension = parser.getTagAttr("HarpiaCodeTemplate", "extension")
code_template.source = parser.getTagAttr("HarpiaCodeTemplate", "source")
code_template.command = parser.getTag("HarpiaCodeTemplate").getTag("command").getText()
code_template.code = parser.getTag("HarpiaCodeTemplate").getTag("code").getText()
except:
return None
if code_template.name == "":
return None
return code_template
def load(cls, diagram):
# load the diagram
parser = XMLParser(diagram.file_name)
zoom = parser.getTag("harpia").getTag("zoom").getAttr("value")
diagram.zoom = float(zoom)
try:
language = parser.getTag("harpia").getTag(
"language").getAttr("value")
diagram.language = language
except:
pass
# new version load
blocks = parser.getTag("harpia").getTag(
"blocks").getChildTags("block")
for block in blocks:
block_type = block.getAttr("type")
if block_type not in System.plugins:
continue
block_id = int(block.getAttr("id"))
position = block.getTag("position")
x = position.getAttr("x")
y = position.getAttr("y")
properties = block.getChildTags("property")
props = {}
for prop in properties:
try:
props[prop.key] = prop.value
except:
pass
new_block = System.plugins[block_type]
new_block.set_properties(props)
new_block.id = block_id
new_block.x = float(x)
new_block.y = float(y)
diagram.add_block(new_block)
connections = parser.getTag("harpia").getTag(
"connections").getChildTags("connection")
for conn in connections:
try:
from_block = diagram.blocks[
int(conn.getAttr("from_block"))]
to_block = diagram.blocks[int(conn.getAttr("to_block"))]
except:
continue
from_block_out = int(conn.getAttr("from_out"))
to_block_in = int(conn.getAttr("to_in"))
diagram.start_connection(from_block, int(from_block_out) - 1)
diagram.end_connection(to_block, int(to_block_in) - 1)
return True
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/save.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'SAVEFilename',
'SAVEType',
'BackgroundColor',
'BorderColor',
'HelpView'
]
handlers = [
'on_SAVEButtonSearch_clicked',
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked',
'on_cancel_clicked',
'on_save_confirm_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# load properties values
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
if Property.name == "filename":
self.widgets['SAVEFilename'].set_text(Property.value);
# if Property.name == "filetype":
# if Property.value == "png":
# self.widgets['SAVEType'].set_active( int(0) )
# if Property.value == "jpeg":
# self.widgets['SAVEType'].set_active( int(1) )
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/save" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/runCmd.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'cmdString',
'BackgroundColor',
'BorderColor',
'HelpView',
'enIsntZero'
]
handlers = [
'on_cancel_clicked',
'on_prop_confirm_clicked',
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# load properties values
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
if Property.name == "cmdString":
self.widgets['cmdString'].set_text(Property.value)
if Property.name == "enIsntZero":
self.widgets['enIsntZero'].set_active(Property.value == "True")
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/runCmd" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/show.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'SHOWDisable',
'BackgroundColor',
'BorderColor',
'HelpView'
]
handlers = [
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked',
'on_cancel_clicked',
'on_show_confirm_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# load properties values
# There is no properties
# load block state
t_bState = self.m_oS2iBlockProperties.GetState()
self.widgets['SHOWDisable'].set_active(not t_bState)
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/show" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/stereoCorr.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'maxDist',
'BackgroundColor',
'BorderColor',
'HelpView'
]
handlers = [
'on_cancel_clicked',
'on_prop_confirm_clicked',
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# load properties values
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
if Property.name == "maxDist":
self.widgets['maxDist'].set_value(float(Property.value));
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + 'help/stereoCorr' + _('_en.help'))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ["HARPIA_DATA_DIR"]
filename = self.m_sDataDir + "glade/resize.ui"
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = ["Properties", "method", "BackgroundColor", "BorderColor", "HelpView"]
handlers = [
"on_cancel_clicked",
"on_prop_confirm_clicked",
"on_BackColorButton_clicked",
"on_BorderColorButton_clicked",
]
top_window = "Properties"
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# load properties values
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
if Property.name == "method":
if Property.value == "CV_INTER_NN":
self.widgets["method"].set_active(int(0))
if Property.value == "CV_INTER_LINEAR":
self.widgets["method"].set_active(int(1))
if Property.value == "CV_INTER_AREA":
self.widgets["method"].set_active(int(2))
if Property.value == "CV_INTER_CUBIC":
self.widgets["method"].set_active(int(3))
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/checkCir" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets["HelpView"].set_buffer(t_oTextBuffer)
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/plotHistogram.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'HISTImageType',
'HISTLabelChannel',
'HISTRadioR',
'HISTRadioG',
'HISTRadioB',
'BackgroundColor',
'BorderColor',
'HelpView'
]
handlers = [
# 'on_HISTRadioR_pressed',
# 'on_HISTRadioG_pressed',
# 'on_HISTRadioB_pressed',
'on_HISTImageType_changed',
'on_cancel_clicked',
'on_histogram_confirm_clicked',
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# load properties values
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
if Property.name == "type":
if Property.value == "allcolors":
self.widgets['HISTImageType'].set_active(int(0))
if Property.value == "color":
self.widgets['HISTImageType'].set_active(int(1))
self.on_HISTImageType_changed()
if Property.name == "channel":
if Property.value == "R":
self.widgets['HISTRadioR'].set_active(True);
if Property.value == "G":
self.widgets['HISTRadioG'].set_active(True);
if Property.value == "B":
self.widgets['HISTRadioB'].set_active(True);
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/plotHistogram" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def on_ProcessToolBar_clickedIneer(self):
t_nPage = self.widgets['WorkArea'].get_current_page()
t_bIsLive = False
if self.m_oGcDiagrams.has_key(t_nPage):
self.UpdateStatus(0)
t_oGcDiagram = self.m_oGcDiagrams[t_nPage]
#print "PROCESS CHAIN",t_oS2iDiagram.GetProcessChain()
#t_oProcessXML = bt.bind_string("<harpia>" + \
# str(t_oGcDiagram.GetProcessChain()) + \
# "</harpia>")
#print len(list(t_oProcessXML.harpia.properties.childNodes))
t_oProcessXML = XMLParser("<harpia>" + \
str(t_oGcDiagram.GetProcessChain()) + \
"</harpia>", fromString=True)
#print t_oProcessXML
graph_size = len(list(t_oProcessXML.getTag("harpia").getTag("properties").getTagChildren()))
if graph_size > 1:
blocks = t_oProcessXML.getTag("harpia").getTag("properties").getChildTags("block")
for t_oBlockProperties in blocks:
block_properties = t_oBlockProperties.getChildTags("property")
if int(t_oBlockProperties.type) == 00: # 00 = acquisition block
inputType = 'file'
for t_oProperty in block_properties:
if t_oProperty.name == 'type':
print t_oProperty.name
inputType = t_oProperty.value
###Just in case we need to know if we are dealing with a live feed or not this early
# if inputType == 'video' or inputType == 'live':
# #if not t_bIsLive:
# #t_bIsLive = True
# adoção do paradigma monolítico.. nada de ficar mandando imagens por sockets!!
if t_oProperty.name == 'filename' and inputType == 'file':
t_oProperty.value = os.path.expanduser(t_oProperty.value)
t_oProperty.value = os.path.realpath(t_oProperty.value)
if (not os.path.exists(t_oProperty.value)):
errMsg = _("Bad Filename: ") + t_oProperty.value
print(errMsg)
self.SetStatusMessage(errMsg, 0)
return
if int(t_oBlockProperties.type) == 01: # 01 => save image
for t_oProperty in block_properties:
if t_oProperty.name == 'filename':
t_oProperty.value = os.path.realpath(t_oProperty.value)
# seguindo o paradigma de não mandar mais nada.. vamos testar com o haar =]
# não vamos mandar mais nada mas vamos traduzir o path do haarCascade pra algo real
if int(t_oBlockProperties.type) == 610: # 610 => haar detector... passando a cascade .xml
for t_oProperty in block_properties:
if t_oProperty.name == 'cascade_name':
t_oProperty.value = os.path.realpath(t_oProperty.value)
if (not os.path.exists(t_oProperty.value)):
errMsg = _("Bad Filename: ") + t_oProperty.value
print(errMsg)
self.SetStatusMessage(errMsg, 0)
return
# cpscotti standalone!!!
t_lsProcessChain = [] # lista pra n precisar ficar copiando prum lado e pro otro o xml inteiro
t_lsProcessChain.append(t_oProcessXML.getXML())
t_Sm = s2iSessionManager.s2iSessionManager()
## pegando o novo ID (criado pela s2iSessionManager) e passando para o s2idiagram
self.m_oGcDiagrams[t_nPage].SetIDBackendSession(t_Sm.m_sSessionId)
# step sempre sera uma lista.. primeiro elemento eh uma mensagem, segundo eh o erro.. caso exista erro.. passar para o s2idiagram tb!
self.m_oGcDiagrams[t_nPage].set_error_log('')
t_bEverythingOk = True
for step in t_Sm.NewInstance(t_lsProcessChain):
if len(step) > 1:
if step[1] != '' and step[1] != None:
self.m_oGcDiagrams[t_nPage].append_error_log(step[1])
t_bEverythingOk = False
self.SetStatusMessage(step[0], t_bEverythingOk)
# self.widgets['StatusLabel'].set_text()
# print t_bEverythingOk
print step[0]
# yield step#util caso se resolva usar a interface "lenta" ou se descubra como atualizar rapidamente a GUI
# falta pegar o retorno!!!!!!
self.UpdateStatus(7)
def __init__(self, Editor):
"""
The Constructor. Loads the glade object, and initializes the GladeWindow object for signal connecting.
"""
self.m_oEditor = Editor
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
## Imports the Glade file
filename = self.m_sDataDir + 'glade/preferences.ui'
# The widget list
widget_list = ['preferences',
'PREFGridInt',
'PREFShowGrid',
'PREFServer',
'PREFPort']
# Signal Handlers from the Buttons Confirm and Cancel
handlers = ['on_preferences_confirm_clicked',
'on_preferences_cancel_clicked']
# The Top window widget
top_window = 'preferences'
# Starts the GladeWindow, calling his __init__ method.
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# Set the preferences Icon
self.widgets['preferences'].set_icon_from_file(self.m_sDataDir + "images/harpia_ave.png")
## The Homefolder where the preferences will be stored.
if os.name == "nt":
self.HomeFolder = os.path.join(os.path.expanduser("~"), "harpiaFiles\\")
else:
self.HomeFolder = os.path.expanduser("~/harpiaFiles/")
# self.HomeFolder = "/tmp/.harpia/"
## The Config File Path
self.configfile = self.HomeFolder + "harpia.conf"
# If the path do not exist, creates one.
if not (os.path.exists(self.HomeFolder)):
os.makedirs(self.HomeFolder, mode=0700)
# If the path do not exist, creates one copyint the default harpia.conf.
if not (os.path.exists(self.configfile)):
shutil.copy("harpia.conf", self.HomeFolder)
print "TESTE" + self.configfile
## A binderytool object, with the preferences stored
self.m_oPreferencesXML = XMLParser(self.configfile)
# ---------------------------------
self.preferences = self.m_oPropertiesXML.getTag("harpia").getTag("editor").getChildTags("property")
# Load Preferences
for Preference in self.preferences:
if Preference.name == "show-grid":
if Preference.value == "false":
state = "False"
else:
state = "True"
self.widgets['PREFShowGrid'].set_active(eval(state))
if Preference.name == "grid-int":
self.widgets['PREFGridInt'].set_value(int(Preference.value))
if Preference.name == "server":
self.widgets['PREFServer'].set_text(unicode(Preference.value))
if Preference.name == "port":
self.widgets['PREFPort'].set_value(int(Preference.value))
def __init__( self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir+'glade/fillRect.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'BackgroundColor',
'BorderColor',
'HelpView',
'FILLFillColor'
]
handlers = [
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked',
'on_FILLFillColorButton_clicked',
'on_cancel_clicked',
'on_fill_confirm_clicked'
]
top_window = 'Properties'
self.m_oFillColor = [0,0,0]
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
self.configure()
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
#load properties values
for Property in self.block_properties:
#self.widgets['FILLBackgroundColor'].modify_bg(gtk.STATE_NORMAL,t_oColor)
name = Property.getAttr("name")
value = Property.getAttr("value")
if name == "red":
self.m_oBackColor[0] = float(value)
#self.widgets['FILLFillColor'].set_value( float(value) )
self.m_oFillColor[0] = float(value)
if name == "green":
self.m_oBackColor[1] = float(value)
self.m_oFillColor[1] = float(value)
if name == "blue":
self.m_oBackColor[2] = float(value)
self.m_oFillColor[2] = float(value)
t_nBackRed = self.m_oBackColor[0] * 257
t_nBackGreen = self.m_oBackColor[1] * 257
t_nBackBlue = self.m_oBackColor[2] * 257
t_oBackColor = gtk.gdk.Color(red=int(t_nBackRed),green=int(t_nBackGreen),blue=int(t_nBackBlue))
self.widgets['BackgroundColor'].modify_bg(gtk.STATE_NORMAL,t_oBackColor)
#########################
# Sets the Fill Color the same as the background color in inicialization
self.widgets['FILLFillColor'].modify_bg(gtk.STATE_NORMAL,t_oBackColor)
#load help text
t_oS2iHelp = XMLParser(self.m_sDataDir+"help/fillRect"+ _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text( unicode( str( t_oS2iHelp.getTag("help").getTag("content").getTagContent()) ) )
self.widgets['HelpView'].set_buffer( t_oTextBuffer )
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/saveVideo.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'SAVEFilename',
'SAVEType',
'SAVEFrameRate',
'BackgroundColor',
'BorderColor',
'codecSelection',
'HelpView',
'save_confirm'
]
handlers = [
'on_SAVEButtonSearch_clicked',
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked',
'on_cancel_clicked',
'on_save_confirm_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# load properties values
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
if Property.name == "filename":
self.widgets['SAVEFilename'].set_text(os.path.expanduser(Property.value));
if Property.name == "framerate":
self.widgets['SAVEFrameRate'].set_value(float(Property.value));
if Property.name == "codecSelection":
if Property.value == "MPEG1":
self.widgets['codecSelection'].set_active(0)
elif Property.value == "mjpeg":
self.widgets['codecSelection'].set_active(1)
elif Property.value == "MPEG4.2":
self.widgets['codecSelection'].set_active(2)
elif Property.value == "MPEG4.3":
self.widgets['codecSelection'].set_active(3)
elif Property.value == "MPEG4":
self.widgets['codecSelection'].set_active(4)
elif Property.value == "H263":
self.widgets['codecSelection'].set_active(5)
elif Property.value == "H263I":
self.widgets['codecSelection'].set_active(6)
elif Property.value == "FLV1":
self.widgets['codecSelection'].set_active(7)
# if Property.name == "filetype":
# if Property.value == "png":
# self.widgets['SAVEType'].set_active( int(0) )
# if Property.value == "jpeg":
# self.widgets['SAVEType'].set_active( int(1) )
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/saveVideo" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def ReturnResponse(self):
t_oResponse = XMLParser(self.HARPIARESPONSE, fromString=True)
return t_oResponse
def parseAndGenerate(dirName, XMLChain, installDirName):
cleanGenerator()
global g_bSaveVideo # Passando todas as variaveis globais devolta ao default
global g_bLive
global g_bVideo
global g_bCameras
global g_bFrameRate
global g_ShowCount
g_ShowCount = 0
g_bSaveVideo = []
g_bVideo = []
g_bCameras = []
g_bFrameRate = 0.1
g_bLive = False # this shall be a list containing the "blockNumbers" for each live acquisition block; len(g_bLive) works just like it is now..
yield [_("Starting Up Generator")]
#doc = binderytools.bind_file(XMLChain)
doc = XMLParser(XMLChain)
########################Create the blocks from XMLChain############################
##################################################################################
# in the future we may want to show some kind of progress bar..
# the next few comented lines implement a progress counter.. this could be thrown up to the GUI via yields =]
##################################################################################
# t_nBlockCount = 0.0
# for block in (doc.harpia.properties.block):
# t_nBlockCount += 1.0
# t_nItCount = 0.0
yield [_("Generating Code")]
blocks = doc.getTag("harpia").getTag("properties").getChildTags("block")
for blockIter in blocks:
# print str(100.0*(t_nItCount/t_nBlockCount)) + "%"
# t_nItCount += 1.0
tmpBlock = blockTemplate()
tmpBlock.blockType = blockIter.type
tmpBlock.blockNumber = blockIter.id
tmpBlock.properties = []
tmpBlock.myConnections = []
tmpBlock.outputsToSave = []
try:
block_properties = blockIter.getChildTags("property")
for propIter in block_properties:
tmpBlock.properties.append((propIter.name, propIter.value))
except AttributeError:
pass
ID = tmpBlock.blockNumber
tmpBlock.getBlockOutputTypes()
net_blocks = doc.getTag("harpia").getTag("network").getChildTags("block")
for block in net_blocks:
if (block.id == ID and int(block.type) <> 10):
portCount = -1
outputs = block.getTag("outputs").getChildTags("output")
for output in outputs:
tmpConnection = connection()
portCount += 1
if output.inBlock != '--':
tmpConnection.sourceOutput = output.id
tmpConnection.destinationInput = output.input
tmpConnection.destinationNumber = output.inBlock
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# !!!!!!cpscotti type-oriented connections...!!!!!
tmpConnection.connType = tmpBlock.outTypes[int(tmpConnection.sourceOutput) - 1]
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
tmpBlock.myConnections.append(tmpConnection)
else:
tmpConnection.destinationNumber = '--'
tmpBlock.myConnections.append(tmpConnection)
try:
if output.grab == 'True':
tmpBlock.outputsToSave.append(output.id)
except:
pass
###################################################################################
# ADDING TO EACH BLOCK OBJECT THE RESULTING CODE , THEN ADDING THE BLOCK IN A LIST #
###################################################################################
##Please, do not change the sequence
tmpBlock.blockCodeWriter()
tmpBlock.connectorCodeWriter()
tmpBlock.saverCodeWriter()
blockList.append(tmpBlock)
###################################################################################
weights = []
# Apply the weights on each connection of each block in listOfBlocks, then return a list with its connections
def applyWeightsOnConnections(listOfBlocks):
# def applyWeightsOnConnections(listOfBlocks,RollinList):
##For each block on listt:
returnList = []
for block in listOfBlocks:
##Put the connections on returnList
for connection in block.myConnections:
##and apply the weight on this connection
for tmpBlock in blockList:
if tmpBlock.blockNumber == connection.destinationNumber:
tmpBlock.weight += block.weight
if tmpBlock not in returnList:
# if tmpBlock not in RollinList:
returnList.append(tmpBlock)
# RollinList.append(tmpBlock)
return returnList
for block in blockList:
# cpscotti..
# if block.blockType == '00':
if len(s2idirectory.block[int(block.blockType)]["InTypes"]) == 0 and s2idirectory.block[int(block.blockType)][
"Outputs"] <> 0:
tmpList = []
# RollinPathList = []
tmpList.append(block)
# RollinPathList.append(block)
organizedChain = applyWeightsOnConnections(tmpList) # ,RollinPathList)
while organizedChain <> []:
organizedChain = applyWeightsOnConnections(organizedChain) # ,RollinPathList)
###Recursive tests... future functionality
# print "Start: "
# for block in organizedChain:
# print "\t"+str(block.blockNumber)
biggestWeight = -1
for block in blockList:
if block.weight >= biggestWeight:
biggestWeight = block.weight
for activeWeight in range(biggestWeight):
activeWeight += 1
for block in blockList:
if block.weight == activeWeight:
arguments.append(block.functionArguments)
images.append(block.imagesIO)
functionCalls.append("//Weight: " + str(block.weight) + "\n")
functionCalls.append(block.functionCall)
deallocations.append(block.dealloc)
outDeallocations.append(block.outDealloc)
header = r"""// Auto-generated C Code - S2i Harpia
/*
* In order to compile this source code run, in a terminal window, the following command:
* gcc sourceCodeName.c `pkg-config --libs --cflags opencv` -o outputProgramName
*
* the `pkg-config ... opencv` parameter is a inline command that returns the path to both
* the libraries and the headers necessary when using opencv. The command also returns other necessary compiler options.
*/
// header:
#ifdef _CH_
#pragma package <opencv>
#endif
#include <stdio.h>
#include <stdlib.h>
#include <opencv/cv.h>
#include <opencv/cxmisc.h>
#include <opencv/cxcore.h>
#include <opencv/ml.h>
#include <opencv/cvaux.h>
#include <opencv/cvwimage.h>
#include <opencv/highgui.h>
#include <math.h>
#define PI 3.1415926535898
double rads(double degs)
{
return (PI/180 * degs);
}
"""
global usesFindSquares
if usesFindSquares == 1:
header += r"""
//Routines to findSquares
double angle( CvPoint* pt1, CvPoint* pt2, CvPoint* pt0 )
{
double dx1 = pt1->x - pt0->x;
double dy1 = pt1->y - pt0->y;
double dx2 = pt2->x - pt0->x;
double dy2 = pt2->y - pt0->y;
return (dx1*dx2 + dy1*dy2)/sqrt((dx1*dx1 + dy1*dy1)*(dx2*dx2 + dy2*dy2) + 1e-10);
}
CvSeq* findSquares4( IplImage* img, CvMemStorage* storage, int minArea, int maxArea)
{
CvSeq* contours;
int i, c, l, N = 11;
int thresh = 50;
CvSize sz = cvSize( img->width & -2, img->height & -2 );
IplImage* timg = cvCloneImage( img ); // make a copy of input image
IplImage* gray = cvCreateImage( sz, 8, 1 );
IplImage* pyr = cvCreateImage( cvSize(sz.width/2, sz.height/2), 8, 3 );
IplImage* tgray;
CvSeq* result;
double s, t;
if(minArea == -1)
minArea = 0;
if(maxArea == -1)
maxArea = (img->width * img->height);
CvSeq* squares = cvCreateSeq( 0, sizeof(CvSeq), sizeof(CvPoint), storage );
cvSetImageROI( timg, cvRect( 0, 0, sz.width, sz.height ));
// down-scale and upscale the image to filter out the noise
cvPyrDown( timg, pyr, CV_GAUSSIAN_5x5 );
cvPyrUp( pyr, timg, CV_GAUSSIAN_5x5 );
tgray = cvCreateImage( sz, 8, 1 );
// find squares in every color plane of the image
for( c = 0; c < 3; c++ )
{
// extract the c-th color plane
cvSetImageCOI( timg, c+1 );
cvCopy( timg, tgray, 0 );
for( l = 0; l < N; l++ )
{
if( l == 0 )
{
cvCanny( tgray, gray, 0, thresh, 5 );
cvDilate( gray, gray, 0, 1 );
}
else
{
cvThreshold( tgray, gray, (l+1)*255/N, 255, CV_THRESH_BINARY );
}
cvFindContours( gray, storage, &contours, sizeof(CvContour),
CV_RETR_LIST, CV_CHAIN_APPROX_SIMPLE, cvPoint(0,0) );
while( contours )
{
result = cvApproxPoly( contours, sizeof(CvContour), storage,
CV_POLY_APPROX_DP, cvContourPerimeter(contours)*0.02, 0 );
if( result->total == 4 &&
fabs(cvContourArea(result,CV_WHOLE_SEQ)) > minArea &&
fabs(cvContourArea(result,CV_WHOLE_SEQ)) < maxArea &&
cvCheckContourConvexity(result) )
{
s = 0;
for( i = 0; i < 5; i++ )
{
if( i >= 2 )
{
t = fabs(angle(
(CvPoint*)cvGetSeqElem( result, i ),
(CvPoint*)cvGetSeqElem( result, i-2 ),
(CvPoint*)cvGetSeqElem( result, i-1 )));
s = s > t ? s : t;
}
}
if( s < 0.3 )
for( i = 0; i < 4; i++ )
cvSeqPush( squares,
(CvPoint*)cvGetSeqElem( result, i ));
}
contours = contours->h_next;
}
}
}
cvReleaseImage( &gray );
cvReleaseImage( &pyr );
cvReleaseImage( &tgray );
cvReleaseImage( &timg );
return squares;
}
double drawSquares( IplImage* cpy, CvSeq* squares )
{
CvSeqReader reader;
int i;
cvStartReadSeq( squares, &reader, 0 );
for( i = 0; i < squares->total; i += 4 )
{
CvPoint pt[4], *rect = pt;
int count = 4;
CV_READ_SEQ_ELEM( pt[0], reader );
CV_READ_SEQ_ELEM( pt[1], reader );
CV_READ_SEQ_ELEM( pt[2], reader );
CV_READ_SEQ_ELEM( pt[3], reader );
cvPolyLine( cpy, &rect, &count, 1, 1, CV_RGB(0,255,0), 3, CV_AA, 0 );
}
return (double)squares->total;
}
//End of routines to findSquares
"""
global usesFindColor
if usesFindColor == 1:
header += r"""
int GetColor(IplImage * imagem, int x, int y)
{
return (int)(((uchar*)(imagem->imageData + imagem->widthStep*y))[x]);
}
void SetColor(IplImage * imagem, int x, int y, uchar color)
{
((uchar*)(imagem->imageData + imagem->widthStep*y))[x] = color;
}
void CheckImg(IplImage * img, uchar c_value, uchar tolerance)
{
uchar min,max;
int y_It,x_It;
if((int)c_value < (int)tolerance)
tolerance = c_value;
if(((int)c_value+(int)tolerance) > 255)
tolerance = 255 - c_value;
min = c_value - tolerance;
max = c_value + tolerance;
for(y_It=0;y_It<(img->height);y_It++)
for(x_It=0;x_It<(img->width);x_It++)
{
uchar val;
val = GetColor(img,x_It,y_It);
if(val >= min && val <= max)
SetColor(img,x_It,y_It,255);
else
SetColor(img,x_It,y_It,0);
}
}
CvPoint GetCenter(IplImage * src, long int * nOfPts)//, long int * numOfPoints)
{
long int numOfMatchingPoints;
long int posXsum;
long int posYsum;
int x_It, y_It;
CvPoint Center;
posXsum = 0;
posYsum = 0;
numOfMatchingPoints = 0;
for(y_It=0;y_It<(src->height);y_It++)
for(x_It=0;x_It<(src->width);x_It++)
if(GetColor(src,x_It,y_It))
{
posXsum += x_It;
posYsum += y_It;
numOfMatchingPoints++;
}
if(numOfMatchingPoints > 0)
{
Center.x = (int)(posXsum/numOfMatchingPoints);
Center.y = (int)(posYsum/numOfMatchingPoints);
}
else
numOfMatchingPoints = -1;
// (*numOfPoints) = numOfMatchingPoints;
if(nOfPts)
*nOfPts = numOfMatchingPoints;
return Center;
}
double dist22Points(CvPoint a, CvPoint b)
{
int xD,yD;
xD = a.x - b.x;
yD = a.y - b.y;
xD = (xD>0)?xD:-xD;
yD = (yD>0)?yD:-yD;
return (double)(xD*xD + yD*yD);
}
double GetVariance(IplImage * src,CvPoint center)//, long int * numOfPoints)
{
long int numOfMatchingPoints;
double distSquaresSum;
double variance;
int x_It,y_It;
numOfMatchingPoints = 0;
distSquaresSum = 0.0;
for(y_It=0;y_It<(src->height);y_It++)
for(x_It=0;x_It<(src->width);x_It++)
if(GetColor(src,x_It,y_It))
{
numOfMatchingPoints++;
distSquaresSum += dist22Points(center,cvPoint(x_It,y_It));
}
if(numOfMatchingPoints)
variance = distSquaresSum/numOfMatchingPoints;
else
variance = -1;
return variance;
}
long int CheckForColor(IplImage * src, IplImage * dst, uchar * c_value, uchar * tolerance, CvPoint * pointCenter, double * variance)
{
uchar B,B_T,G,G_T,R,R_T;
int i;
long int numOfPoints;
CvPoint centro;
IplImage * m_pChans[3] = {NULL,NULL,NULL};
numOfPoints = 0;
B = c_value[0];
G = c_value[1];
R = c_value[2];
B_T = tolerance[0];
G_T = tolerance[1];
R_T = tolerance[2];
for(i=0;i<3;i++)
m_pChans[i] = cvCreateImage(cvGetSize(src),IPL_DEPTH_8U, 1);
cvSplit(src,m_pChans[0],m_pChans[1],m_pChans[2], NULL);
CheckImg(m_pChans[0],B,B_T);
CheckImg(m_pChans[1],G,G_T);
CheckImg(m_pChans[2],R,R_T);
cvAnd(m_pChans[0], m_pChans[1], dst, NULL );
cvAnd(m_pChans[2], dst, dst, NULL );
centro = GetCenter(dst,&numOfPoints);//,&numOfPoints);
if(numOfPoints != -1)
*variance = GetVariance(dst,centro);
pointCenter->x = centro.x;
pointCenter->y = centro.y;
cvReleaseImage( &m_pChans[0] );
cvReleaseImage( &m_pChans[1] );
cvReleaseImage( &m_pChans[2] );
return numOfPoints;
}
"""
header += "\nint main(int argc, char ** argv)\n{"
declaration = "\n\t//declaration block\n"
for x in arguments:
declaration = declaration + x
for x in images:
declaration = declaration + x
if g_bLive:
declaration += \
'int end; end = 0; int key; \n'
for aCapture in g_bVideo:
declaration += 'CvCapture * block' + aCapture[0] + '_capture = NULL; \n IplImage * block' + aCapture[
0] + '_frame = NULL; \n block' + aCapture[0] + '_capture = cvCreateFileCapture("' + aCapture[
1] + '"); \n'
for aCamera in g_bCameras:
declaration += 'CvCapture * block' + aCamera[0] + '_capture = NULL; \n IplImage * block' + aCamera[
0] + '_frame = NULL; \n block' + aCamera[0] + '_capture = cvCaptureFromCAM(' + aCamera[1] + '); \n'
declaration += 'while(!end) \n {\t \n'
for aCapture in g_bVideo:
declaration += 'cvGrabFrame (block' + aCapture[0] + '_capture); \n block' + aCapture[
0] + '_frame = cvRetrieveFrame (block' + aCapture[0] + '_capture); \n'
for aCamera in g_bCameras:
declaration += 'cvGrabFrame (block' + aCamera[0] + '_capture); \n block' + aCamera[
0] + '_frame = cvRetrieveFrame (block' + aCamera[0] + '_capture); \n'
execution = "\n\t//execution block\n"
for x in functionCalls:
execution += x
if g_ShowCount == 0:
execution += '\n\tcvNamedWindow("Control Window",CV_WINDOW_AUTOSIZE );'
if g_bLive:
execution += '\n\tkey = cvWaitKey (' + str(int((1.0 / g_bFrameRate) * 1000.0)) + ');\n if(key != -1)\n end = 1;'
deallocating = "\n\t//deallocation block\n"
for x in deallocations:
deallocating += x
deallocating += "}"
else:
deallocating = "\n\t//deallocation block\n"
for x in deallocations:
deallocating += x
closing = ""
closing += "\n"
for outDea in outDeallocations:
closing += outDea
if g_bLive:
for aCapture in g_bVideo:
closing += 'cvReleaseCapture(&block' + aCapture[0] + '_capture);\n'
for aCamera in g_bCameras:
closing += 'cvReleaseCapture(&block' + aCamera[0] + '_capture);\n'
for vWriter in g_bSaveVideo:
closing += 'cvReleaseVideoWriter(&block' + vWriter + '_vidWriter);\n'
closing += "return 0;\n } //closing main()\n"
# Final code assembly
entireCode = header + declaration + execution + deallocating + closing
yield [_("Saving Code")]
# saving code file
os.chdir(tmpDir + dirName)
codeFilename = dirName + '.c'
codeFile = open(codeFilename, 'w')
codeFile.write(entireCode)
codeFile.close()
yield [_("Building Makefile")]
# Assembly of "necessary" makefiles
# ...windows..
makeFilename = 'Makefile' + dirName + '.bat'
makeFileEntry = '"' + installDirName + '\\bin\\gcc.exe" ' + codeFilename + " -o " + codeFilename[
:-2] + ".exe -lcv -lcxcore -lhighgui"
makeFile = open(makeFilename, 'w')
makeFile.write(makeFileEntry)
makeFile.close()
# ...posix..
makeFilename = 'Makefile.' + dirName
makeFileEntry = "export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:" + installDirName + "/lib/; export PKG_CONFIG_PATH=" + installDirName + "/lib/pkgconfig/;g++ " + codeFilename + " -o " + codeFilename[
:-2] + " `pkg-config --cflags --libs opencv`"
makeFile = open(makeFilename, 'w')
makeFile.write(makeFileEntry)
makeFile.close()
yield [_("Compiling ...")]
if os.name == "nt":
i, o = os.popen4('Makefile' + dirName + '.bat')
o.readlines()
o.close()
i.close()
yield [_("Running ...")]
i, o = os.popen4(codeFilename[:-2] + '.exe')
## ERROR LOG
Error = ''
errorList = o.readlines()
for element in errorList:
Error = Error + element
SetErrorLog(Error)
o.readlines()
o.close()
i.close()
else:
i, o = os.popen4("sh " + makeFilename)
## appending compile errors too.. helps finding bugs! =]
CompilingErrors = ''
CerrorList = o.readlines()
if len(CerrorList) <> 0:
CompilingErrors += "Something was detected while compiling the source code.\n" + \
"There is a huge chance you've found a bug, please report to [email protected] \n" + \
"sending the processing chain (.hrp), this error message and some description on what you were doing.\n" + \
"We appreciate your help!\n"
for element in CerrorList:
CompilingErrors += element
o.close()
i.close()
if g_bLive:
yield [_("Running, press any key (on the video output window) to terminate."), CompilingErrors]
else:
yield [_("Running ..."), CompilingErrors]
# cpscotti, xunxo bunitinho pra nao travar a interface qndo tive rodando o live =]
t_oPrg = RunPrg("LD_LIBRARY_PATH=" + installDirName + "/lib/ ./" + codeFilename[:-2])
t_oPrg.start()
while t_oPrg.isAlive():
t_oPrg.join(0.4)
while gtk.events_pending():
gtk.main_iteration(False)
# fim do "xunx"
## ERROR LOG
o = open("RunErrorLog", "r")
Error = ''
errorList = o.readlines()
for element in errorList:
Error += element
yield [_("Leaving.."), Error]
SetErrorLog(CompilingErrors + Error)
o.close()
i.close()
def on_ProcessToolBar_clickedIneer(self):
page = self.widgets['WorkArea'].get_current_page()
if self.diagrams.has_key(page):
self.UpdateStatus(0)
diagram = self.diagrams[page]
process_XML = XMLParser("<harpia>" + \
str(DiagramControl(diagram).get_process_chain()) + \
"</harpia>", fromString=True)
graph_size = len(list(process_XML.getTag("harpia").getTag("properties").getTagChildren()))
if graph_size > 1:
blocks = process_XML.getTag("harpia").getTag("properties").getChildTags("block")
for t_oBlockProperties in blocks:
block_properties = t_oBlockProperties.getChildTags("property")
if int(t_oBlockProperties.type) == 00: # 00 = acquisition block
inputType = 'file'
for block_property in block_properties:
if block_property.name == 'type':
print block_property.name
inputType = block_property.value
# adoção do paradigma monolítico.. nada de ficar mandando imagens por sockets!!
if block_property.name == 'filename' and inputType == 'file':
block_property.value = os.path.expanduser(block_property.value)
block_property.value = os.path.realpath(block_property.value)
if (not os.path.exists(block_property.value)):
errMsg = _("Bad Filename: ") + block_property.value
print(errMsg)
self.__set_status_message(errMsg, 0)
return
if int(t_oBlockProperties.type) == 01: # 01 => save image
for block_property in block_properties:
if block_property.name == 'filename':
block_property.value = os.path.realpath(block_property.value)
# seguindo o paradigma de não mandar mais nada.. vamos testar com o haar =]
# não vamos mandar mais nada mas vamos traduzir o path do haarCascade pra algo real
if int(t_oBlockProperties.type) == 610: # 610 => haar detector... passando a cascade .xml
for block_property in block_properties:
if block_property.name == 'cascade_name':
block_property.value = os.path.realpath(block_property.value)
if (not os.path.exists(block_property.value)):
errMsg = _("Bad Filename: ") + block_property.value
print(errMsg)
self.__set_status_message(errMsg, 0)
return
# cpscotti standalone!!!
process_chain = [] # lista pra n precisar ficar copiando prum lado e pro otro o xml inteiro
process_chain.append(process_XML.getXML())
session_manager = s2iSessionManager.s2iSessionManager()
## pegando o novo ID (criado pela s2iSessionManager) e passando para o s2idiagram
self.diagrams[page].set_session_id(session_manager.session_id)
# step sempre sera uma lista.. primeiro elemento eh uma mensagem, segundo eh o erro.. caso exista erro.. passar para o s2idiagram tb!
self.diagrams[page].set_error_log('')
t_bEverythingOk = True
for step in session_manager.new_instance(process_chain):
if len(step) > 1:
if step[1] != '' and step[1] != None:
self.diagrams[page].append_error_log(step[1])
t_bEverythingOk = False
self.__set_status_message(step[0], t_bEverythingOk)
# self.widgets['StatusLabel'].set_text()
# print t_bEverythingOk
print step[0]
# yield step#util caso se resolva usar a interface "lenta" ou se descubra como atualizar rapidamente a GUI
# falta pegar o retorno!!!!!!
self.UpdateStatus(7)
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/smooth.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'SMOOType',
'SMOOParam1',
'SMOOParam2',
'BackgroundColor',
'BorderColor',
'HelpView'
]
handlers = [
'on_cancel_clicked',
'on_smooth_confirm_clicked',
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# load properties values
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
name = Property.getAttr("name")
value = Property.getAttr("value")
if name == "type":
if value == "CV_BLUR":
self.widgets['SMOOType'].set_active(int(0))
if value == "CV_GAUSSIAN":
self.widgets['SMOOType'].set_active(int(1))
if value == "CV_MEDIAN":
self.widgets['SMOOType'].set_active(int(2))
# if Property.value == "CV_BILATERAL":
# self.widgets['SMOOType'].set_active( int(4) )
if name == "param1":
self.widgets['SMOOParam1'].set_value(int(value))
if name == "param2":
self.widgets['SMOOParam2'].set_value(int(value))
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/smooth" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def parseAndGenerate(dirName, XMLChain, installDirName):
blockList = []
outDeallocations = []
functionCalls = []
headers = []
images = []
deallocations = []
global g_bLive
g_bLive = []
global g_bFrameRate
g_bFrameRate = 0.1
yield [_("Starting Up Generator")]
doc = XMLParser(XMLChain)
########################Create the blocks from XMLChain############################
##################################################################################
# in the future we may want to show some kind of progress bar..
# the next few comented lines implement a progress counter.. this could be thrown up to the GUI via yields =]
##################################################################################
# t_nBlockCount = 0.0
# for block in (doc.harpia.properties.block):
# t_nBlockCount += 1.0
# t_nItCount = 0.0
yield [_("Generating Code")]
blocks = doc.getTag("harpia").getTag("properties").getChildTags("block")
for blockIter in blocks:
tmpBlock = blockTemplate(blockIter.type, blockIter.id)
try:
block_properties = blockIter.getChildTags("property")
for propIter in block_properties:
tmpBlock.properties.append((propIter.name, propIter.value))
except AttributeError:
pass
tmpBlock.getBlockOutputTypes()
net_blocks = doc.getTag("harpia").getTag("network").getChildTags("block")
for block in net_blocks:
if (block.id != blockIter.id):
continue
outputs = block.getTag("outputs").getChildTags("output")
for output in outputs:
tmpConnection = connection()
if output.inBlock != '--':
tmpConnection.sourceOutput = output.id
tmpConnection.destinationInput = output.input
tmpConnection.destinationNumber = output.inBlock
tmpConnection.connType = tmpBlock.outTypes[int(tmpConnection.sourceOutput) - 1]
tmpBlock.myConnections.append(tmpConnection)
else:
tmpConnection.destinationNumber = '--'
tmpBlock.myConnections.append(tmpConnection)
#######################################################################
##Please, do not change the sequence
tmpBlock.blockCodeWriter()
tmpBlock.connectorCodeWriter()
blockList.append(tmpBlock)
#######################################################################
weights = []
for block in blockList:
if len(s2idirectory.block[int(block.blockType)]["InTypes"]) != 0:
continue
if len(s2idirectory.block[int(block.blockType)]["OutTypes"]) == 0:
continue
tmpList = []
tmpList.append(block)
organizedChain = __apply_weights_on_connections(tmpList, blockList)
while organizedChain != []:
organizedChain = __apply_weights_on_connections(organizedChain, blockList)
biggestWeight = -1
for block in blockList:
if block.weight >= biggestWeight:
biggestWeight = block.weight
for activeWeight in range(biggestWeight):
activeWeight += 1
for block in blockList:
if block.weight == activeWeight:
headers.append(block.header)
images.append(block.imagesIO)
functionCalls.append("//Weight: " + str(block.weight) + "\n")
functionCalls.append(block.functionCall)
deallocations.append(block.dealloc)
outDeallocations.append(block.outDealloc)
header = r"""// Auto-generated C Code - S2i Harpia
/*
* In order to compile this source code run, in a terminal window, the following command:
* gcc sourceCodeName.c `pkg-config --libs --cflags opencv` -o outputProgramName
*
* the `pkg-config ... opencv` parameter is a inline command that returns the path to both
* the libraries and the headers necessary when using opencv. The command also returns other necessary compiler options.
*/
// header:
#ifdef _CH_
#pragma package <opencv>
#endif
#include <stdio.h>
#include <stdlib.h>
#include <opencv/cv.h>
#include <opencv/cxmisc.h>
#include <opencv/cxcore.h>
#include <opencv/ml.h>
#include <opencv/cvaux.h>
#include <opencv/cvwimage.h>
#include <opencv/highgui.h>
#include <math.h>
"""
# Adds only if it does not contains
temp_header = []
for header_code in headers:
if header_code not in temp_header:
temp_header.append(header_code)
for header_code in temp_header:
header += header_code
header += "\nint main(int argc, char ** argv)\n{"
declaration = "\n//declaration block\n"
for image in images:
declaration += image
if len(g_bLive) > 0:
declaration += 'int end = 0;\n'
declaration += 'int key;\n'
declaration += 'while(!end) \n {\t \n'
for value in g_bLive:
declaration += 'cvGrabFrame(block' + value[0] + '_capture);\n' + \
'block' + value[0] + '_frame = cvRetrieveFrame (block' + value[0] + '_capture);\n'
execution = "\n\t//execution block\n"
for x in functionCalls:
execution += x
if len(g_bLive) > 0:
execution += 'key = cvWaitKey (' + str(int((1.0 / g_bFrameRate) * 1000.0)) + ');\n'
execution += 'if(key != -1)\n'
execution += 'end = 1;\n'
deallocating = "\n\t//deallocation block\n"
for x in deallocations:
deallocating += x
if len(g_bLive) > 0:
deallocating += "}"
closing = ""
closing += "\n"
for outDea in outDeallocations:
closing += outDea
closing += "return 0;\n } //closing main()\n"
# Final code assembly
entireCode = header + declaration + execution + deallocating + closing
yield [_("Saving Code")]
# saving code file
os.chdir(tmpDir + dirName)
codeFilename = dirName + '.c'
codeFile = open(codeFilename, 'w')
codeFile.write(entireCode)
codeFile.close()
yield [_("Building Makefile")]
# Assembly of "necessary" makefiles
# ...windows..
makeFilename = 'Makefile' + dirName + '.bat'
makeFileEntry = '"' + installDirName + '\\bin\\gcc.exe" ' + codeFilename + " -o " + codeFilename[:-2] + ".exe -lcv -lcxcore -lhighgui"
makeFile = open(makeFilename, 'w')
makeFile.write(makeFileEntry)
makeFile.close()
# ...posix..
makeFilename = 'Makefile.' + dirName
makeFileEntry = "export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:" + installDirName + "/lib/;"
makeFileEntry += "export PKG_CONFIG_PATH=" + installDirName + "/lib/pkgconfig/;"
makeFileEntry += "g++ " + codeFilename + " -o " + codeFilename[:-2] + " `pkg-config --cflags --libs opencv`"
makeFile = open(makeFilename, 'w')
makeFile.write(makeFileEntry)
makeFile.close()
yield [_("Compiling ...")]
if os.name == "nt":
i, o = os.popen4('Makefile' + dirName + '.bat')
o.readlines()
o.close()
i.close()
yield [_("Running ...")]
i, o = os.popen4(codeFilename[:-2] + '.exe')
## ERROR LOG
Error = ''
errorList = o.readlines()
for element in errorList:
Error = Error + element
__set_error_log(Error)
o.readlines()
o.close()
i.close()
else:
i, o = os.popen4("sh " + makeFilename)
## appending compile errors too.. helps finding bugs! =]
CompilingErrors = ''
CerrorList = o.readlines()
if len(CerrorList) != 0:
CompilingErrors += "Something was detected while compiling the source code.\n" + \
"There is a huge chance you've found a bug, please report to [email protected] \n" + \
"sending the processing chain (.hrp), this error message and some description on what you were doing.\n" + \
"We appreciate your help!\n"
for element in CerrorList:
CompilingErrors += element
o.close()
i.close()
if len(g_bLive) > 0:
yield [_("Running, press any key (on the video output window) to terminate."), CompilingErrors]
else:
yield [_("Running ..."), CompilingErrors]
t_oPrg = RunPrg("LD_LIBRARY_PATH=" + installDirName + "/lib/ ./" + codeFilename[:-2])
t_oPrg.start()
while t_oPrg.isAlive():
t_oPrg.join(0.4)
while gtk.events_pending():
gtk.main_iteration(False)
## ERROR LOG
o = open("RunErrorLog", "r")
Error = ''
errorList = o.readlines()
for element in errorList:
Error += element
yield [_("Leaving.."), Error]
__set_error_log(CompilingErrors + Error)
o.close()
i.close()
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/threshold.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'THREThreshold',
'THREThresholdType',
'THRELabelMaxValue',
'THREMaxValue',
'BackgroundColor',
'BorderColor',
'HelpView'
]
handlers = [
'on_THREThresholdType_changed',
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked',
'on_cancel_clicked',
'on_threshold_confirm_clicked',
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# load properties values
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
if Property.name == "threshold":
self.widgets['THREThreshold'].set_value(float(Property.value))
if Property.name == "maxValue":
self.widgets['THREMaxValue'].set_value(float(Property.value))
if Property.name == "thresholdType":
if Property.value == "CV_THRESH_BINARY":
self.widgets['THREThresholdType'].set_active(int(0))
self.on_THREThresholdType_changed()
if Property.value == "CV_THRESH_BINARY_INV":
self.widgets['THREThresholdType'].set_active(int(1))
self.on_THREThresholdType_changed()
if Property.value == "CV_THRESH_TRUNC":
self.widgets['THREThresholdType'].set_active(int(2))
self.on_THREThresholdType_changed()
if Property.value == "CV_THRESH_TOZERO":
self.widgets['THREThresholdType'].set_active(int(3))
self.on_THREThresholdType_changed()
if Property.value == "CV_THRESH_TOZERO_INV":
self.widgets['THREThresholdType'].set_active(int(4))
self.on_THREThresholdType_changed()
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/threshold" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def parseAndGenerate(dirName, XMLChain, installDirName):
cleanGenerator()
global g_bSaveVideo # Passando todas as variaveis globais devolta ao default
global g_bLive
global g_bVideo
global g_bCameras
global g_bFrameRate
global g_ShowCount
g_ShowCount = 0
g_bSaveVideo = []
g_bVideo = []
g_bCameras = []
g_bFrameRate = 0.1
g_bLive = False # this shall be a list containing the "blockNumbers" for each live acquisition block; len(g_bLive) works just like it is now..
yield [_("Starting Up Generator")]
#doc = binderytools.bind_file(XMLChain)
doc = XMLParser(XMLChain)
########################Create the blocks from XMLChain############################
##################################################################################
# in the future we may want to show some kind of progress bar..
# the next few comented lines implement a progress counter.. this could be thrown up to the GUI via yields =]
##################################################################################
# t_nBlockCount = 0.0
# for block in (doc.harpia.properties.block):
# t_nBlockCount += 1.0
# t_nItCount = 0.0
yield [_("Generating Code")]
blocks = doc.getTag("harpia").getTag("properties").getChildTags("block")
for blockIter in blocks:
# print str(100.0*(t_nItCount/t_nBlockCount)) + "%"
# t_nItCount += 1.0
tmpBlock = blockTemplate()
tmpBlock.blockType = blockIter.type
tmpBlock.blockNumber = blockIter.id
tmpBlock.properties = []
tmpBlock.myConnections = []
tmpBlock.outputsToSave = []
try:
block_properties = blockIter.getChildTags("property")
for propIter in block_properties:
tmpBlock.properties.append((propIter.name, propIter.value))
except AttributeError:
pass
ID = tmpBlock.blockNumber
tmpBlock.getBlockOutputTypes()
net_blocks = doc.getTag("harpia").getTag("network").getChildTags(
"block")
for block in net_blocks:
if (block.id == ID and int(block.type) <> 10):
portCount = -1
outputs = block.getTag("outputs").getChildTags("output")
for output in outputs:
tmpConnection = connection()
portCount += 1
if output.inBlock != '--':
tmpConnection.sourceOutput = output.id
tmpConnection.destinationInput = output.input
tmpConnection.destinationNumber = output.inBlock
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# !!!!!!cpscotti type-oriented connections...!!!!!
tmpConnection.connType = tmpBlock.outTypes[
int(tmpConnection.sourceOutput) - 1]
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
tmpBlock.myConnections.append(tmpConnection)
else:
tmpConnection.destinationNumber = '--'
tmpBlock.myConnections.append(tmpConnection)
try:
if output.grab == 'True':
tmpBlock.outputsToSave.append(output.id)
except:
pass
###################################################################################
# ADDING TO EACH BLOCK OBJECT THE RESULTING CODE , THEN ADDING THE BLOCK IN A LIST #
###################################################################################
##Please, do not change the sequence
tmpBlock.blockCodeWriter()
tmpBlock.connectorCodeWriter()
tmpBlock.saverCodeWriter()
blockList.append(tmpBlock)
###################################################################################
weights = []
# Apply the weights on each connection of each block in listOfBlocks, then return a list with its connections
def applyWeightsOnConnections(listOfBlocks):
# def applyWeightsOnConnections(listOfBlocks,RollinList):
##For each block on listt:
returnList = []
for block in listOfBlocks:
##Put the connections on returnList
for connection in block.myConnections:
##and apply the weight on this connection
for tmpBlock in blockList:
if tmpBlock.blockNumber == connection.destinationNumber:
tmpBlock.weight += block.weight
if tmpBlock not in returnList:
# if tmpBlock not in RollinList:
returnList.append(tmpBlock)
# RollinList.append(tmpBlock)
return returnList
for block in blockList:
# cpscotti..
# if block.blockType == '00':
if len(s2idirectory.block[int(
block.blockType)]["InTypes"]) == 0 and len(
s2idirectory.block[int(block.blockType)]["OutTypes"]) <> 0:
tmpList = []
# RollinPathList = []
tmpList.append(block)
# RollinPathList.append(block)
organizedChain = applyWeightsOnConnections(
tmpList) # ,RollinPathList)
while organizedChain <> []:
organizedChain = applyWeightsOnConnections(
organizedChain) # ,RollinPathList)
###Recursive tests... future functionality
# print "Start: "
# for block in organizedChain:
# print "\t"+str(block.blockNumber)
biggestWeight = -1
for block in blockList:
if block.weight >= biggestWeight:
biggestWeight = block.weight
for activeWeight in range(biggestWeight):
activeWeight += 1
for block in blockList:
if block.weight == activeWeight:
arguments.append(block.functionArguments)
images.append(block.imagesIO)
functionCalls.append("//Weight: " + str(block.weight) + "\n")
functionCalls.append(block.functionCall)
deallocations.append(block.dealloc)
outDeallocations.append(block.outDealloc)
header = r"""// Auto-generated C Code - S2i Harpia
/*
* In order to compile this source code run, in a terminal window, the following command:
* gcc sourceCodeName.c `pkg-config --libs --cflags opencv` -o outputProgramName
*
* the `pkg-config ... opencv` parameter is a inline command that returns the path to both
* the libraries and the headers necessary when using opencv. The command also returns other necessary compiler options.
*/
// header:
#ifdef _CH_
#pragma package <opencv>
#endif
#include <stdio.h>
#include <stdlib.h>
#include <opencv/cv.h>
#include <opencv/cxmisc.h>
#include <opencv/cxcore.h>
#include <opencv/ml.h>
#include <opencv/cvaux.h>
#include <opencv/cvwimage.h>
#include <opencv/highgui.h>
#include <math.h>
#define PI 3.1415926535898
double rads(double degs)
{
return (PI/180 * degs);
}
"""
global usesFindSquares
if usesFindSquares == 1:
header += r"""
//Routines to findSquares
double angle( CvPoint* pt1, CvPoint* pt2, CvPoint* pt0 )
{
double dx1 = pt1->x - pt0->x;
double dy1 = pt1->y - pt0->y;
double dx2 = pt2->x - pt0->x;
double dy2 = pt2->y - pt0->y;
return (dx1*dx2 + dy1*dy2)/sqrt((dx1*dx1 + dy1*dy1)*(dx2*dx2 + dy2*dy2) + 1e-10);
}
CvSeq* findSquares4( IplImage* img, CvMemStorage* storage, int minArea, int maxArea)
{
CvSeq* contours;
int i, c, l, N = 11;
int thresh = 50;
CvSize sz = cvSize( img->width & -2, img->height & -2 );
IplImage* timg = cvCloneImage( img ); // make a copy of input image
IplImage* gray = cvCreateImage( sz, 8, 1 );
IplImage* pyr = cvCreateImage( cvSize(sz.width/2, sz.height/2), 8, 3 );
IplImage* tgray;
CvSeq* result;
double s, t;
if(minArea == -1)
minArea = 0;
if(maxArea == -1)
maxArea = (img->width * img->height);
CvSeq* squares = cvCreateSeq( 0, sizeof(CvSeq), sizeof(CvPoint), storage );
cvSetImageROI( timg, cvRect( 0, 0, sz.width, sz.height ));
// down-scale and upscale the image to filter out the noise
cvPyrDown( timg, pyr, CV_GAUSSIAN_5x5 );
cvPyrUp( pyr, timg, CV_GAUSSIAN_5x5 );
tgray = cvCreateImage( sz, 8, 1 );
// find squares in every color plane of the image
for( c = 0; c < 3; c++ )
{
// extract the c-th color plane
cvSetImageCOI( timg, c+1 );
cvCopy( timg, tgray, 0 );
for( l = 0; l < N; l++ )
{
if( l == 0 )
{
cvCanny( tgray, gray, 0, thresh, 5 );
cvDilate( gray, gray, 0, 1 );
}
else
{
cvThreshold( tgray, gray, (l+1)*255/N, 255, CV_THRESH_BINARY );
}
cvFindContours( gray, storage, &contours, sizeof(CvContour),
CV_RETR_LIST, CV_CHAIN_APPROX_SIMPLE, cvPoint(0,0) );
while( contours )
{
result = cvApproxPoly( contours, sizeof(CvContour), storage,
CV_POLY_APPROX_DP, cvContourPerimeter(contours)*0.02, 0 );
if( result->total == 4 &&
fabs(cvContourArea(result,CV_WHOLE_SEQ)) > minArea &&
fabs(cvContourArea(result,CV_WHOLE_SEQ)) < maxArea &&
cvCheckContourConvexity(result) )
{
s = 0;
for( i = 0; i < 5; i++ )
{
if( i >= 2 )
{
t = fabs(angle(
(CvPoint*)cvGetSeqElem( result, i ),
(CvPoint*)cvGetSeqElem( result, i-2 ),
(CvPoint*)cvGetSeqElem( result, i-1 )));
s = s > t ? s : t;
}
}
if( s < 0.3 )
for( i = 0; i < 4; i++ )
cvSeqPush( squares,
(CvPoint*)cvGetSeqElem( result, i ));
}
contours = contours->h_next;
}
}
}
cvReleaseImage( &gray );
cvReleaseImage( &pyr );
cvReleaseImage( &tgray );
cvReleaseImage( &timg );
return squares;
}
double drawSquares( IplImage* cpy, CvSeq* squares )
{
CvSeqReader reader;
int i;
cvStartReadSeq( squares, &reader, 0 );
for( i = 0; i < squares->total; i += 4 )
{
CvPoint pt[4], *rect = pt;
int count = 4;
CV_READ_SEQ_ELEM( pt[0], reader );
CV_READ_SEQ_ELEM( pt[1], reader );
CV_READ_SEQ_ELEM( pt[2], reader );
CV_READ_SEQ_ELEM( pt[3], reader );
cvPolyLine( cpy, &rect, &count, 1, 1, CV_RGB(0,255,0), 3, CV_AA, 0 );
}
return (double)squares->total;
}
//End of routines to findSquares
"""
global usesFindColor
if usesFindColor == 1:
header += r"""
int GetColor(IplImage * imagem, int x, int y)
{
return (int)(((uchar*)(imagem->imageData + imagem->widthStep*y))[x]);
}
void SetColor(IplImage * imagem, int x, int y, uchar color)
{
((uchar*)(imagem->imageData + imagem->widthStep*y))[x] = color;
}
void CheckImg(IplImage * img, uchar c_value, uchar tolerance)
{
uchar min,max;
int y_It,x_It;
if((int)c_value < (int)tolerance)
tolerance = c_value;
if(((int)c_value+(int)tolerance) > 255)
tolerance = 255 - c_value;
min = c_value - tolerance;
max = c_value + tolerance;
for(y_It=0;y_It<(img->height);y_It++)
for(x_It=0;x_It<(img->width);x_It++)
{
uchar val;
val = GetColor(img,x_It,y_It);
if(val >= min && val <= max)
SetColor(img,x_It,y_It,255);
else
SetColor(img,x_It,y_It,0);
}
}
CvPoint GetCenter(IplImage * src, long int * nOfPts)//, long int * numOfPoints)
{
long int numOfMatchingPoints;
long int posXsum;
long int posYsum;
int x_It, y_It;
CvPoint Center;
posXsum = 0;
posYsum = 0;
numOfMatchingPoints = 0;
for(y_It=0;y_It<(src->height);y_It++)
for(x_It=0;x_It<(src->width);x_It++)
if(GetColor(src,x_It,y_It))
{
posXsum += x_It;
posYsum += y_It;
numOfMatchingPoints++;
}
if(numOfMatchingPoints > 0)
{
Center.x = (int)(posXsum/numOfMatchingPoints);
Center.y = (int)(posYsum/numOfMatchingPoints);
}
else
numOfMatchingPoints = -1;
// (*numOfPoints) = numOfMatchingPoints;
if(nOfPts)
*nOfPts = numOfMatchingPoints;
return Center;
}
double dist22Points(CvPoint a, CvPoint b)
{
int xD,yD;
xD = a.x - b.x;
yD = a.y - b.y;
xD = (xD>0)?xD:-xD;
yD = (yD>0)?yD:-yD;
return (double)(xD*xD + yD*yD);
}
double GetVariance(IplImage * src,CvPoint center)//, long int * numOfPoints)
{
long int numOfMatchingPoints;
double distSquaresSum;
double variance;
int x_It,y_It;
numOfMatchingPoints = 0;
distSquaresSum = 0.0;
for(y_It=0;y_It<(src->height);y_It++)
for(x_It=0;x_It<(src->width);x_It++)
if(GetColor(src,x_It,y_It))
{
numOfMatchingPoints++;
distSquaresSum += dist22Points(center,cvPoint(x_It,y_It));
}
if(numOfMatchingPoints)
variance = distSquaresSum/numOfMatchingPoints;
else
variance = -1;
return variance;
}
long int CheckForColor(IplImage * src, IplImage * dst, uchar * c_value, uchar * tolerance, CvPoint * pointCenter, double * variance)
{
uchar B,B_T,G,G_T,R,R_T;
int i;
long int numOfPoints;
CvPoint centro;
IplImage * m_pChans[3] = {NULL,NULL,NULL};
numOfPoints = 0;
B = c_value[0];
G = c_value[1];
R = c_value[2];
B_T = tolerance[0];
G_T = tolerance[1];
R_T = tolerance[2];
for(i=0;i<3;i++)
m_pChans[i] = cvCreateImage(cvGetSize(src),IPL_DEPTH_8U, 1);
cvSplit(src,m_pChans[0],m_pChans[1],m_pChans[2], NULL);
CheckImg(m_pChans[0],B,B_T);
CheckImg(m_pChans[1],G,G_T);
CheckImg(m_pChans[2],R,R_T);
cvAnd(m_pChans[0], m_pChans[1], dst, NULL );
cvAnd(m_pChans[2], dst, dst, NULL );
centro = GetCenter(dst,&numOfPoints);//,&numOfPoints);
if(numOfPoints != -1)
*variance = GetVariance(dst,centro);
pointCenter->x = centro.x;
pointCenter->y = centro.y;
cvReleaseImage( &m_pChans[0] );
cvReleaseImage( &m_pChans[1] );
cvReleaseImage( &m_pChans[2] );
return numOfPoints;
}
"""
header += "\nint main(int argc, char ** argv)\n{"
declaration = "\n\t//declaration block\n"
for x in arguments:
declaration = declaration + x
for x in images:
declaration = declaration + x
if g_bLive:
declaration += \
'int end; end = 0; int key; \n'
for aCapture in g_bVideo:
declaration += 'CvCapture * block' + aCapture[
0] + '_capture = NULL; \n IplImage * block' + aCapture[
0] + '_frame = NULL; \n block' + aCapture[
0] + '_capture = cvCreateFileCapture("' + aCapture[
1] + '"); \n'
for aCamera in g_bCameras:
declaration += 'CvCapture * block' + aCamera[
0] + '_capture = NULL; \n IplImage * block' + aCamera[
0] + '_frame = NULL; \n block' + aCamera[
0] + '_capture = cvCaptureFromCAM(' + aCamera[
1] + '); \n'
declaration += 'while(!end) \n {\t \n'
for aCapture in g_bVideo:
declaration += 'cvGrabFrame (block' + aCapture[
0] + '_capture); \n block' + aCapture[
0] + '_frame = cvRetrieveFrame (block' + aCapture[
0] + '_capture); \n'
for aCamera in g_bCameras:
declaration += 'cvGrabFrame (block' + aCamera[
0] + '_capture); \n block' + aCamera[
0] + '_frame = cvRetrieveFrame (block' + aCamera[
0] + '_capture); \n'
execution = "\n\t//execution block\n"
for x in functionCalls:
execution += x
if g_ShowCount == 0:
execution += '\n\tcvNamedWindow("Control Window",CV_WINDOW_AUTOSIZE );'
if g_bLive:
execution += '\n\tkey = cvWaitKey (' + str(
int((1.0 / g_bFrameRate) *
1000.0)) + ');\n if(key != -1)\n end = 1;'
deallocating = "\n\t//deallocation block\n"
for x in deallocations:
deallocating += x
deallocating += "}"
else:
deallocating = "\n\t//deallocation block\n"
for x in deallocations:
deallocating += x
closing = ""
closing += "\n"
for outDea in outDeallocations:
closing += outDea
if g_bLive:
for aCapture in g_bVideo:
closing += 'cvReleaseCapture(&block' + aCapture[0] + '_capture);\n'
for aCamera in g_bCameras:
closing += 'cvReleaseCapture(&block' + aCamera[0] + '_capture);\n'
for vWriter in g_bSaveVideo:
closing += 'cvReleaseVideoWriter(&block' + vWriter + '_vidWriter);\n'
closing += "return 0;\n } //closing main()\n"
# Final code assembly
entireCode = header + declaration + execution + deallocating + closing
yield [_("Saving Code")]
# saving code file
os.chdir(tmpDir + dirName)
codeFilename = dirName + '.c'
codeFile = open(codeFilename, 'w')
codeFile.write(entireCode)
codeFile.close()
yield [_("Building Makefile")]
# Assembly of "necessary" makefiles
# ...windows..
makeFilename = 'Makefile' + dirName + '.bat'
makeFileEntry = '"' + installDirName + '\\bin\\gcc.exe" ' + codeFilename + " -o " + codeFilename[:
-2] + ".exe -lcv -lcxcore -lhighgui"
makeFile = open(makeFilename, 'w')
makeFile.write(makeFileEntry)
makeFile.close()
# ...posix..
makeFilename = 'Makefile.' + dirName
makeFileEntry = "export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:" + installDirName + "/lib/; export PKG_CONFIG_PATH=" + installDirName + "/lib/pkgconfig/;g++ " + codeFilename + " -o " + codeFilename[:
-2] + " `pkg-config --cflags --libs opencv`"
makeFile = open(makeFilename, 'w')
makeFile.write(makeFileEntry)
makeFile.close()
yield [_("Compiling ...")]
if os.name == "nt":
i, o = os.popen4('Makefile' + dirName + '.bat')
o.readlines()
o.close()
i.close()
yield [_("Running ...")]
i, o = os.popen4(codeFilename[:-2] + '.exe')
## ERROR LOG
Error = ''
errorList = o.readlines()
for element in errorList:
Error = Error + element
SetErrorLog(Error)
o.readlines()
o.close()
i.close()
else:
i, o = os.popen4("sh " + makeFilename)
## appending compile errors too.. helps finding bugs! =]
CompilingErrors = ''
CerrorList = o.readlines()
if len(CerrorList) <> 0:
CompilingErrors += "Something was detected while compiling the source code.\n" + \
"There is a huge chance you've found a bug, please report to [email protected] \n" + \
"sending the processing chain (.hrp), this error message and some description on what you were doing.\n" + \
"We appreciate your help!\n"
for element in CerrorList:
CompilingErrors += element
o.close()
i.close()
if g_bLive:
yield [
_("Running, press any key (on the video output window) to terminate."
), CompilingErrors
]
else:
yield [_("Running ..."), CompilingErrors]
# cpscotti, xunxo bunitinho pra nao travar a interface qndo tive rodando o live =]
t_oPrg = RunPrg("LD_LIBRARY_PATH=" + installDirName + "/lib/ ./" +
codeFilename[:-2])
t_oPrg.start()
while t_oPrg.isAlive():
t_oPrg.join(0.4)
while gtk.events_pending():
gtk.main_iteration(False)
# fim do "xunx"
## ERROR LOG
o = open("RunErrorLog", "r")
Error = ''
errorList = o.readlines()
for element in errorList:
Error += element
yield [_("Leaving.."), Error]
SetErrorLog(CompilingErrors + Error)
o.close()
i.close()
def parseAndGenerate(dirName, XMLChain, installDirName):
blockList = []
outDeallocations = []
functionCalls = []
headers = []
images = []
deallocations = []
global g_bLive
g_bLive = []
global g_bFrameRate
g_bFrameRate = 0.1
yield [_("Starting Up Generator")]
doc = XMLParser(XMLChain)
########################Create the blocks from XMLChain############################
##################################################################################
# in the future we may want to show some kind of progress bar..
# the next few comented lines implement a progress counter.. this could be thrown up to the GUI via yields =]
##################################################################################
# t_nBlockCount = 0.0
# for block in (doc.harpia.properties.block):
# t_nBlockCount += 1.0
# t_nItCount = 0.0
yield [_("Generating Code")]
blocks = doc.getTag("harpia").getTag("properties").getChildTags("block")
for blockIter in blocks:
tmpBlock = blockTemplate(blockIter.type, blockIter.id)
try:
block_properties = blockIter.getChildTags("property")
for propIter in block_properties:
tmpBlock.properties.append((propIter.name, propIter.value))
except AttributeError:
pass
tmpBlock.getBlockOutputTypes()
net_blocks = doc.getTag("harpia").getTag("network").getChildTags(
"block")
for block in net_blocks:
if (block.id != blockIter.id):
continue
outputs = block.getTag("outputs").getChildTags("output")
for output in outputs:
tmpConnection = connection()
if output.inBlock != '--':
tmpConnection.sourceOutput = output.id
tmpConnection.destinationInput = output.input
tmpConnection.destinationNumber = output.inBlock
tmpConnection.connType = tmpBlock.outTypes[
int(tmpConnection.sourceOutput) - 1]
tmpBlock.myConnections.append(tmpConnection)
else:
tmpConnection.destinationNumber = '--'
tmpBlock.myConnections.append(tmpConnection)
#######################################################################
##Please, do not change the sequence
tmpBlock.blockCodeWriter()
tmpBlock.connectorCodeWriter()
blockList.append(tmpBlock)
#######################################################################
weights = []
for block in blockList:
if len(s2idirectory.block[int(block.blockType)]["InTypes"]) != 0:
continue
if len(s2idirectory.block[int(block.blockType)]["OutTypes"]) == 0:
continue
tmpList = []
tmpList.append(block)
organizedChain = __apply_weights_on_connections(tmpList, blockList)
while organizedChain != []:
organizedChain = __apply_weights_on_connections(
organizedChain, blockList)
biggestWeight = -1
for block in blockList:
if block.weight >= biggestWeight:
biggestWeight = block.weight
for activeWeight in range(biggestWeight):
activeWeight += 1
for block in blockList:
if block.weight == activeWeight:
headers.append(block.header)
images.append(block.imagesIO)
functionCalls.append("//Weight: " + str(block.weight) + "\n")
functionCalls.append(block.functionCall)
deallocations.append(block.dealloc)
outDeallocations.append(block.outDealloc)
header = r"""// Auto-generated C Code - S2i Harpia
/*
* In order to compile this source code run, in a terminal window, the following command:
* gcc sourceCodeName.c `pkg-config --libs --cflags opencv` -o outputProgramName
*
* the `pkg-config ... opencv` parameter is a inline command that returns the path to both
* the libraries and the headers necessary when using opencv. The command also returns other necessary compiler options.
*/
// header:
#ifdef _CH_
#pragma package <opencv>
#endif
#include <stdio.h>
#include <stdlib.h>
#include <opencv/cv.h>
#include <opencv/cxmisc.h>
#include <opencv/cxcore.h>
#include <opencv/ml.h>
#include <opencv/cvaux.h>
#include <opencv/cvwimage.h>
#include <opencv/highgui.h>
#include <math.h>
"""
# Adds only if it does not contains
temp_header = []
for header_code in headers:
if header_code not in temp_header:
temp_header.append(header_code)
for header_code in temp_header:
header += header_code
header += "\nint main(int argc, char ** argv)\n{"
declaration = "\n//declaration block\n"
for image in images:
declaration += image
if len(g_bLive) > 0:
declaration += 'int end = 0;\n'
declaration += 'int key;\n'
declaration += 'while(!end) \n {\t \n'
for value in g_bLive:
declaration += 'cvGrabFrame(block' + value[0] + '_capture);\n' + \
'block' + value[0] + '_frame = cvRetrieveFrame (block' + value[0] + '_capture);\n'
execution = "\n\t//execution block\n"
for x in functionCalls:
execution += x
if len(g_bLive) > 0:
execution += 'key = cvWaitKey (' + str(
int((1.0 / g_bFrameRate) * 1000.0)) + ');\n'
execution += 'if(key != -1)\n'
execution += 'end = 1;\n'
deallocating = "\n\t//deallocation block\n"
for x in deallocations:
deallocating += x
if len(g_bLive) > 0:
deallocating += "}"
closing = ""
closing += "\n"
for outDea in outDeallocations:
closing += outDea
closing += "return 0;\n } //closing main()\n"
# Final code assembly
entireCode = header + declaration + execution + deallocating + closing
yield [_("Saving Code")]
# saving code file
os.chdir(tmpDir + dirName)
codeFilename = dirName + '.c'
codeFile = open(codeFilename, 'w')
codeFile.write(entireCode)
codeFile.close()
yield [_("Building Makefile")]
# Assembly of "necessary" makefiles
# ...windows..
makeFilename = 'Makefile' + dirName + '.bat'
makeFileEntry = '"' + installDirName + '\\bin\\gcc.exe" ' + codeFilename + " -o " + codeFilename[:
-2] + ".exe -lcv -lcxcore -lhighgui"
makeFile = open(makeFilename, 'w')
makeFile.write(makeFileEntry)
makeFile.close()
# ...posix..
makeFilename = 'Makefile.' + dirName
makeFileEntry = "export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:" + installDirName + "/lib/;"
makeFileEntry += "export PKG_CONFIG_PATH=" + installDirName + "/lib/pkgconfig/;"
makeFileEntry += "g++ " + codeFilename + " -o " + codeFilename[:-2] + " `pkg-config --cflags --libs opencv`"
makeFile = open(makeFilename, 'w')
makeFile.write(makeFileEntry)
makeFile.close()
yield [_("Compiling ...")]
if os.name == "nt":
i, o = os.popen4('Makefile' + dirName + '.bat')
o.readlines()
o.close()
i.close()
yield [_("Running ...")]
i, o = os.popen4(codeFilename[:-2] + '.exe')
## ERROR LOG
Error = ''
errorList = o.readlines()
for element in errorList:
Error = Error + element
__set_error_log(Error)
o.readlines()
o.close()
i.close()
else:
i, o = os.popen4("sh " + makeFilename)
## appending compile errors too.. helps finding bugs! =]
CompilingErrors = ''
CerrorList = o.readlines()
if len(CerrorList) != 0:
CompilingErrors += "Something was detected while compiling the source code.\n" + \
"There is a huge chance you've found a bug, please report to [email protected] \n" + \
"sending the processing chain (.hrp), this error message and some description on what you were doing.\n" + \
"We appreciate your help!\n"
for element in CerrorList:
CompilingErrors += element
o.close()
i.close()
if len(g_bLive) > 0:
yield [
_("Running, press any key (on the video output window) to terminate."
), CompilingErrors
]
else:
yield [_("Running ..."), CompilingErrors]
t_oPrg = RunPrg("LD_LIBRARY_PATH=" + installDirName + "/lib/ ./" +
codeFilename[:-2])
t_oPrg.start()
while t_oPrg.isAlive():
t_oPrg.join(0.4)
while gtk.events_pending():
gtk.main_iteration(False)
## ERROR LOG
o = open("RunErrorLog", "r")
Error = ''
errorList = o.readlines()
for element in errorList:
Error += element
yield [_("Leaving.."), Error]
__set_error_log(CompilingErrors + Error)
o.close()
i.close()
def load(cls):
"""
This method loads the diagram.
Returns:
* **Types** (:class:`boolean<boolean>`)
"""
prefs = Preferences()
from harpia.system import System
file_name = System.get_user_dir() + "/" + prefs.conf_file_path
file_name = os.path.expanduser(file_name)
if os.path.exists(file_name) is False:
return prefs
parser = XMLParser(file_name)
if parser.getTag("HarpiaProperties") is None:
return prefs
try:
prefs.default_directory = parser.getTagAttr("HarpiaProperties",
"default_directory")
prefs.default_filename = parser.getTagAttr("HarpiaProperties",
"default_filename")
prefs.grid = int(parser.getTagAttr("HarpiaProperties","grid"))
prefs.width = int(parser.getTagAttr("HarpiaProperties","width"))
prefs.height = int(parser.getTagAttr("HarpiaProperties",
"height"))
prefs.hpaned_work_area = int(parser.getTagAttr("HarpiaProperties",
"hpaned_work_area"))
prefs.vpaned_bottom = int(parser.getTagAttr("HarpiaProperties",
"vpaned_bottom"))
prefs.vpaned_left = int(parser.getTagAttr("HarpiaProperties",
"vpaned_left"))
files = parser.getTag("HarpiaProperties").getTag(
"recent_files").getChildTags("name")
for file_name in files:
prefs.recent_files.append(file_name.getAttr("value"))
except:
pass
return prefs
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/findColor.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'_R',
'_G',
'_B',
'_R_T',
'_G_T',
'_B_T',
'BackgroundColor',
'BorderColor',
'HelpView',
'prop_confirm'
]
handlers = [
'on_cancel_clicked',
'on_prop_confirm_clicked',
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# load properties values
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
name = Property.getAttr("name")
value = Property.getAttr("value")
if name == "_R":
self.widgets['_R'].set_value(float(value));
if name == "_G":
self.widgets['_G'].set_value(float(value));
if name == "_B":
self.widgets['_B'].set_value(float(value));
if name == "_R_T":
self.widgets['_R_T'].set_value(float(value));
if name == "_G_T":
self.widgets['_G_T'].set_value(float(value));
if name == "_B_T":
self.widgets['_B_T'].set_value(float(value));
# if Property.name == "isFilling":
# if Property.value == "true":
# self.widgets['isFilling'].set_active( True );
# else:
# self.widgets['isFilling'].set_active( False );
# if Property.name == "isScalling":
# if Property.value == "true":
# self.widgets['isScalling'].set_active( True );
# else:
# self.widgets['isScalling'].set_active( False );
# if Property.name == "isCenter":
# if Property.value == "true":
# self.widgets['isAtCenter'].set_active( True );
# else:
# self.widgets['isAtPoint'].set_active( True );
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + 'help/findColor' + _('_en.help'))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def save(cls, prefs):
"""
This method save the diagram.
Returns:
* **Types** (:class:`boolean<boolean>`)
"""
parser = XMLParser()
parser.addTag('HarpiaProperties')
parser.setTagAttr('HarpiaProperties','default_directory',
prefs.default_directory)
parser.setTagAttr('HarpiaProperties','default_filename',
prefs.default_filename)
parser.setTagAttr('HarpiaProperties','grid', prefs.grid)
parser.setTagAttr('HarpiaProperties','width', prefs.width)
parser.setTagAttr('HarpiaProperties','height', prefs.height)
parser.setTagAttr('HarpiaProperties','hpaned_work_area',
prefs.hpaned_work_area)
parser.setTagAttr('HarpiaProperties','vpaned_bottom',
prefs.vpaned_bottom)
parser.setTagAttr('HarpiaProperties','vpaned_left',
prefs.vpaned_left)
parser.appendToTag('HarpiaProperties', 'recent_files')
for key in prefs.recent_files:
parser.appendToTag('recent_files', 'name', value=key)
try:
from harpia.system import System
file_name = System.get_user_dir() + "/" + prefs.conf_file_path
confFile = file(os.path.expanduser(file_name), 'w')
confFile.write(parser.prettify())
confFile.close()
except IOError as e:
return False
return True
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/findColor.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties', '_R', '_G', '_B', '_R_T', '_G_T', '_B_T',
'BackgroundColor', 'BorderColor', 'HelpView', 'prop_confirm'
]
handlers = [
'on_cancel_clicked', 'on_prop_confirm_clicked',
'on_BackColorButton_clicked', 'on_BorderColorButton_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# load properties values
self.block_properties = self.m_oPropertiesXML.getTag(
"properties").getTag("block").getChildTags("property")
for Property in self.block_properties:
name = Property.getAttr("name")
value = Property.getAttr("value")
if name == "_R":
self.widgets['_R'].set_value(float(value))
if name == "_G":
self.widgets['_G'].set_value(float(value))
if name == "_B":
self.widgets['_B'].set_value(float(value))
if name == "_R_T":
self.widgets['_R_T'].set_value(float(value))
if name == "_G_T":
self.widgets['_G_T'].set_value(float(value))
if name == "_B_T":
self.widgets['_B_T'].set_value(float(value))
# if Property.name == "isFilling":
# if Property.value == "true":
# self.widgets['isFilling'].set_active( True );
# else:
# self.widgets['isFilling'].set_active( False );
# if Property.name == "isScalling":
# if Property.value == "true":
# self.widgets['isScalling'].set_active( True );
# else:
# self.widgets['isScalling'].set_active( False );
# if Property.name == "isCenter":
# if Property.value == "true":
# self.widgets['isAtCenter'].set_active( True );
# else:
# self.widgets['isAtPoint'].set_active( True );
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + 'help/findColor' +
_('_en.help'))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(
unicode(
str(
t_oS2iHelp.getTag("help").getTag(
"content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
def on_ProcessToolBar_clickedIneer(self):
page = self.widgets['WorkArea'].get_current_page()
if self.diagrams.has_key(page):
self.UpdateStatus(0)
diagram = self.diagrams[page]
process_XML = XMLParser("<harpia>" + \
str(DiagramControl(diagram).get_process_chain()) + \
"</harpia>", fromString=True)
graph_size = len(list(process_XML.getTag("harpia").getTag("properties").getTagChildren()))
if graph_size > 1:
blocks = process_XML.getTag("harpia").getTag("properties").getChildTags("block")
for t_oBlockProperties in blocks:
block_properties = t_oBlockProperties.getChildTags("property")
if int(t_oBlockProperties.type) == 00: # 00 = acquisition block
inputType = 'file'
for block_property in block_properties:
if block_property.name == 'type':
print block_property.name
inputType = block_property.value
# adoção do paradigma monolítico.. nada de ficar mandando imagens por sockets!!
if block_property.name == 'filename' and inputType == 'file':
block_property.value = os.path.expanduser(block_property.value)
block_property.value = os.path.realpath(block_property.value)
if (not os.path.exists(block_property.value)):
errMsg = _("Bad Filename: ") + block_property.value
print(errMsg)
self.SetStatusMessage(errMsg, 0)
return
if int(t_oBlockProperties.type) == 01: # 01 => save image
for block_property in block_properties:
if block_property.name == 'filename':
block_property.value = os.path.realpath(block_property.value)
# seguindo o paradigma de não mandar mais nada.. vamos testar com o haar =]
# não vamos mandar mais nada mas vamos traduzir o path do haarCascade pra algo real
if int(t_oBlockProperties.type) == 610: # 610 => haar detector... passando a cascade .xml
for block_property in block_properties:
if block_property.name == 'cascade_name':
block_property.value = os.path.realpath(block_property.value)
if (not os.path.exists(block_property.value)):
errMsg = _("Bad Filename: ") + block_property.value
print(errMsg)
self.SetStatusMessage(errMsg, 0)
return
# cpscotti standalone!!!
process_chain = [] # lista pra n precisar ficar copiando prum lado e pro otro o xml inteiro
process_chain.append(process_XML.getXML())
session_manager = s2iSessionManager.s2iSessionManager()
## pegando o novo ID (criado pela s2iSessionManager) e passando para o s2idiagram
self.diagrams[page].set_session_id(session_manager.session_id)
# step sempre sera uma lista.. primeiro elemento eh uma mensagem, segundo eh o erro.. caso exista erro.. passar para o s2idiagram tb!
self.diagrams[page].set_error_log('')
t_bEverythingOk = True
for step in session_manager.new_instance(process_chain):
if len(step) > 1:
if step[1] != '' and step[1] != None:
self.diagrams[page].append_error_log(step[1])
t_bEverythingOk = False
self.SetStatusMessage(step[0], t_bEverythingOk)
# self.widgets['StatusLabel'].set_text()
# print t_bEverythingOk
print step[0]
# yield step#util caso se resolva usar a interface "lenta" ou se descubra como atualizar rapidamente a GUI
# falta pegar o retorno!!!!!!
self.UpdateStatus(7)
def save(cls, code_template):
"""
This method save the code_template in user space.
Returns:
* **Types** (:class:`boolean<boolean>`)
"""
from harpia.system import System
code_template.source = "xml"
parser = XMLParser()
parser.addTag('HarpiaCodeTemplate')
parser.setTagAttr('HarpiaCodeTemplate','name', code_template.name)
parser.setTagAttr('HarpiaCodeTemplate','type', code_template.type)
parser.setTagAttr('HarpiaCodeTemplate','description', code_template.description)
parser.setTagAttr('HarpiaCodeTemplate','language', code_template.language)
parser.setTagAttr('HarpiaCodeTemplate','extension', code_template.extension)
parser.setTagAttr('HarpiaCodeTemplate','source', code_template.source)
parser.appendToTag('HarpiaCodeTemplate','command').string = str(code_template.command)
parser.appendToTag('HarpiaCodeTemplate','code').string = str(code_template.code)
try:
data_dir = System.get_user_dir() + "/extensions/"
data_dir = data_dir + code_template.language + "/"
if not os.path.isdir(data_dir):
try:
os.makedirs(data_dir)
except:
pass
file_name = data_dir + code_template.type + ".xml"
code_template_file = file(os.path.expanduser(file_name), 'w')
code_template_file.write(parser.prettify())
code_template_file.close()
except IOError as e:
return False
return True
class Preferences(GladeWindow):
"""
This class shows the preferences, and handles the signals.
Is derived from GladeWindow and allows the user to edit their preferences.
The preferences are stored in a harpia.conf file and this file is loaded when harpia is initialized.
"""
# The s2iharpiafrontend object (Editor)
# ----------------------------------------------------------------------
def __init__(self, Editor):
"""
The Constructor. Loads the glade object, and initializes the GladeWindow object for signal connecting.
"""
self.m_oEditor = Editor
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
## Imports the Glade file
filename = self.m_sDataDir + 'glade/preferences.ui'
# The widget list
widget_list = [
'preferences', 'PREFGridInt', 'PREFShowGrid', 'PREFServer',
'PREFPort'
]
# Signal Handlers from the Buttons Confirm and Cancel
handlers = [
'on_preferences_confirm_clicked', 'on_preferences_cancel_clicked'
]
# The Top window widget
top_window = 'preferences'
# Starts the GladeWindow, calling his __init__ method.
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# Set the preferences Icon
self.widgets['preferences'].set_icon_from_file(self.m_sDataDir +
"images/harpia_ave.png")
## The Homefolder where the preferences will be stored.
if os.name == "nt":
self.HomeFolder = os.path.join(os.path.expanduser("~"),
"harpiaFiles\\")
else:
self.HomeFolder = os.path.expanduser("~/harpiaFiles/")
# self.HomeFolder = "/tmp/.harpia/"
## The Config File Path
self.configfile = self.HomeFolder + "harpia.conf"
# If the path do not exist, creates one.
if not (os.path.exists(self.HomeFolder)):
os.makedirs(self.HomeFolder, mode=0700)
# If the path do not exist, creates one copyint the default harpia.conf.
if not (os.path.exists(self.configfile)):
shutil.copy("harpia.conf", self.HomeFolder)
print "TESTE" + self.configfile
## A binderytool object, with the preferences stored
self.m_oPreferencesXML = XMLParser(self.configfile)
# ---------------------------------
self.preferences = self.m_oPropertiesXML.getTag("harpia").getTag(
"editor").getChildTags("property")
# Load Preferences
for Preference in self.preferences:
if Preference.name == "show-grid":
if Preference.value == "false":
state = "False"
else:
state = "True"
self.widgets['PREFShowGrid'].set_active(eval(state))
if Preference.name == "grid-int":
self.widgets['PREFGridInt'].set_value(int(Preference.value))
if Preference.name == "server":
self.widgets['PREFServer'].set_text(unicode(Preference.value))
if Preference.name == "port":
self.widgets['PREFPort'].set_value(int(Preference.value))
#----------------------------------------------------------------------
def __del__(self):
pass
# ----------------------------------------------------------------------
# Confirm Button handler function
def on_preferences_confirm_clicked(self, *args):
"""
This function is called whenever the confirm button on the preferences window is clicked.
It stores the preferences in the configfile.
"""
for Preference in self.preferences:
if Preference.name == "show-grid":
if self.widgets['PREFShowGrid'].get_active():
Preference.value = unicode("true")
self.m_oEditor.ShowGrid(True)
else:
Preference.value = unicode("false")
self.m_oEditor.ShowGrid(False)
if Preference.name == "grid-int":
Preference.value = unicode(
str(int(self.widgets['PREFGridInt'].get_value())))
self.m_oEditor.SetGridInterval(int(Preference.value))
if Preference.name == "server":
Preference.value = unicode(
self.widgets['PREFServer'].get_text())
if Preference.name == "port":
Preference.value = unicode(
str(int(self.widgets['PREFPort'].get_value())))
# -------------------------------------------
# Editor = "\n<editor>" + "\n</editor>\n"
# Block = "\n<block>" + "\n</block>\n"
# Connector = "\n<connector>" + "\n</connector>\n"
# Harpia = "<harpia>" + Editor + Block + Connector + "</harpia>"
# Opens the configFile for writing
FileHandle = open(self.configfile, "w")
# Writes the preferences
FileHandle.write(self.m_oPreferencesXML.xml())
# Close the FIle
FileHandle.close()
# -------------------------------------------
# Destroy the preferences window
self.widgets['preferences'].destroy()
# ----------------------------------------------------------------------
# Cancel Button handler function
def on_preferences_cancel_clicked(self, *args):
"""
This function is called whenever the cancel button on the preferences window is clicked.
It just exits the window without saving any changes.
"""
# Just destroy the window, without savind the changes
self.widgets['preferences'].destroy()
def save(cls, diagram):
"""
This method save a file.
Returns:
* **Types** (:class:`boolean<boolean>`)
"""
parser = XMLParser()
parser.addTag('harpia')
parser.appendToTag('harpia', 'version', value=System.VERSION)
parser.appendToTag('harpia', 'zoom', value=diagram.zoom)
parser.appendToTag('harpia', 'language', value=diagram.language)
parser.appendToTag('harpia', 'blocks')
for block_id in diagram.blocks:
block_type = diagram.blocks[block_id].type
pos = diagram.blocks[block_id].get_position()
parser.appendToTag('blocks', 'block', type=block_type, id=block_id)
parser.appendToLastTag('block', 'position', x=pos[0], y=pos[1])
props = diagram.blocks[block_id].get_properties()
for prop in props:
parser.appendToLastTag('block',
'property',
key=str(prop["name"]),
value=str(prop["value"])
)
parser.appendToTag('harpia', 'connections')
for connector in diagram.connectors:
parser.appendToTag('connections', 'connection',
from_block=connector.source.id,
from_out=int(connector.source_port) + 1,
to_block=connector.sink.id,
to_in=int(connector.sink_port) + 1)
try:
save_file = open(str(diagram.file_name), "w")
save_file.write(parser.prettify())
save_file.close()
except IOError as e:
System.log(e.strerror)
return False, e.strerror
diagram.set_modified(False)
return True, "Success"
def __init__(self, Editor):
"""
The Constructor. Loads the glade object, and initializes the GladeWindow object for signal connecting.
"""
self.m_oEditor = Editor
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
## Imports the Glade file
filename = self.m_sDataDir + 'glade/preferences.ui'
# The widget list
widget_list = [
'preferences', 'PREFGridInt', 'PREFShowGrid', 'PREFServer',
'PREFPort'
]
# Signal Handlers from the Buttons Confirm and Cancel
handlers = [
'on_preferences_confirm_clicked', 'on_preferences_cancel_clicked'
]
# The Top window widget
top_window = 'preferences'
# Starts the GladeWindow, calling his __init__ method.
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# Set the preferences Icon
self.widgets['preferences'].set_icon_from_file(self.m_sDataDir +
"images/harpia_ave.png")
## The Homefolder where the preferences will be stored.
if os.name == "nt":
self.HomeFolder = os.path.join(os.path.expanduser("~"),
"harpiaFiles\\")
else:
self.HomeFolder = os.path.expanduser("~/harpiaFiles/")
# self.HomeFolder = "/tmp/.harpia/"
## The Config File Path
self.configfile = self.HomeFolder + "harpia.conf"
# If the path do not exist, creates one.
if not (os.path.exists(self.HomeFolder)):
os.makedirs(self.HomeFolder, mode=0700)
# If the path do not exist, creates one copyint the default harpia.conf.
if not (os.path.exists(self.configfile)):
shutil.copy("harpia.conf", self.HomeFolder)
print "TESTE" + self.configfile
## A binderytool object, with the preferences stored
self.m_oPreferencesXML = XMLParser(self.configfile)
# ---------------------------------
self.preferences = self.m_oPropertiesXML.getTag("harpia").getTag(
"editor").getChildTags("property")
# Load Preferences
for Preference in self.preferences:
if Preference.name == "show-grid":
if Preference.value == "false":
state = "False"
else:
state = "True"
self.widgets['PREFShowGrid'].set_active(eval(state))
if Preference.name == "grid-int":
self.widgets['PREFGridInt'].set_value(int(Preference.value))
if Preference.name == "server":
self.widgets['PREFServer'].set_text(unicode(Preference.value))
if Preference.name == "port":
self.widgets['PREFPort'].set_value(int(Preference.value))
def __init__(self, PropertiesXML, S2iBlockProperties):
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
filename = self.m_sDataDir + 'glade/colorConversion.ui'
self.m_oPropertiesXML = PropertiesXML
self.m_oS2iBlockProperties = S2iBlockProperties
widget_list = [
'Properties',
'COLOConversionType',
'BackgroundColor',
'BorderColor',
'HelpView'
]
handlers = [
'on_BackColorButton_clicked',
'on_BorderColorButton_clicked',
'on_cancel_clicked',
'on_colorConversion_confirm_clicked'
]
top_window = 'Properties'
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
self.block_properties = self.m_oPropertiesXML.getTag("properties").getTag("block").getChildTags("property")
#load properties values
for Property in self.block_properties:
name = Property.getAttr("name")
value = Property.getAttr("value")
if name == "type":
if value == "RGB -> GRAY":
self.widgets['COLOConversionType'].set_active(int(0))
if value == "RGB -> YCrCb":
self.widgets['COLOConversionType'].set_active(int(1))
if value == "YCrCb -> RGB":
self.widgets['COLOConversionType'].set_active(int(2))
if value == "RGB -> HSV":
self.widgets['COLOConversionType'].set_active(int(3))
if value == "HSV -> RGB":
self.widgets['COLOConversionType'].set_active(int(4))
if value == "RGB -> HLS":
self.widgets['COLOConversionType'].set_active(int(5))
if value == "HLS -> RGB":
self.widgets['COLOConversionType'].set_active(int(6))
if value == "RGB -> CIE.XYZ":
self.widgets['COLOConversionType'].set_active(int(7))
if value == "CIE.XYZ -> RGB":
self.widgets['COLOConversionType'].set_active(int(8))
if value == "RGB -> CIE.LAB":
self.widgets['COLOConversionType'].set_active(int(9))
if value == "CIE.LAB -> RGB":
self.widgets['COLOConversionType'].set_active(int(10))
if value == "RGB -> CIE.LUV":
self.widgets['COLOConversionType'].set_active(int(11))
if value == "CIE.LUV -> RGB":
self.widgets['COLOConversionType'].set_active(int(12))
self.configure()
# load help text
t_oS2iHelp = XMLParser(self.m_sDataDir + "help/colorConversion" + _("_en.help"))
t_oTextBuffer = gtk.TextBuffer()
t_oTextBuffer.set_text(unicode(str(t_oS2iHelp.getTag("help").getTag("content").getTagContent())))
self.widgets['HelpView'].set_buffer(t_oTextBuffer)
class Preferences(GladeWindow):
"""
This class shows the preferences, and handles the signals.
Is derived from GladeWindow and allows the user to edit their preferences.
The preferences are stored in a harpia.conf file and this file is loaded when harpia is initialized.
"""
# The s2iharpiafrontend object (Editor)
# ----------------------------------------------------------------------
def __init__(self, Editor):
"""
The Constructor. Loads the glade object, and initializes the GladeWindow object for signal connecting.
"""
self.m_oEditor = Editor
self.m_sDataDir = os.environ['HARPIA_DATA_DIR']
## Imports the Glade file
filename = self.m_sDataDir + 'glade/preferences.ui'
# The widget list
widget_list = ['preferences',
'PREFGridInt',
'PREFShowGrid',
'PREFServer',
'PREFPort']
# Signal Handlers from the Buttons Confirm and Cancel
handlers = ['on_preferences_confirm_clicked',
'on_preferences_cancel_clicked']
# The Top window widget
top_window = 'preferences'
# Starts the GladeWindow, calling his __init__ method.
GladeWindow.__init__(self, filename, top_window, widget_list, handlers)
# Set the preferences Icon
self.widgets['preferences'].set_icon_from_file(self.m_sDataDir + "images/harpia_ave.png")
## The Homefolder where the preferences will be stored.
if os.name == "nt":
self.HomeFolder = os.path.join(os.path.expanduser("~"), "harpiaFiles\\")
else:
self.HomeFolder = os.path.expanduser("~/harpiaFiles/")
# self.HomeFolder = "/tmp/.harpia/"
## The Config File Path
self.configfile = self.HomeFolder + "harpia.conf"
# If the path do not exist, creates one.
if not (os.path.exists(self.HomeFolder)):
os.makedirs(self.HomeFolder, mode=0700)
# If the path do not exist, creates one copyint the default harpia.conf.
if not (os.path.exists(self.configfile)):
shutil.copy("harpia.conf", self.HomeFolder)
print "TESTE" + self.configfile
## A binderytool object, with the preferences stored
self.m_oPreferencesXML = XMLParser(self.configfile)
# ---------------------------------
self.preferences = self.m_oPropertiesXML.getTag("harpia").getTag("editor").getChildTags("property")
# Load Preferences
for Preference in self.preferences:
if Preference.name == "show-grid":
if Preference.value == "false":
state = "False"
else:
state = "True"
self.widgets['PREFShowGrid'].set_active(eval(state))
if Preference.name == "grid-int":
self.widgets['PREFGridInt'].set_value(int(Preference.value))
if Preference.name == "server":
self.widgets['PREFServer'].set_text(unicode(Preference.value))
if Preference.name == "port":
self.widgets['PREFPort'].set_value(int(Preference.value))
#----------------------------------------------------------------------
def __del__(self):
pass
# ----------------------------------------------------------------------
# Confirm Button handler function
def on_preferences_confirm_clicked(self, *args):
"""
This function is called whenever the confirm button on the preferences window is clicked.
It stores the preferences in the configfile.
"""
for Preference in self.preferences:
if Preference.name == "show-grid":
if self.widgets['PREFShowGrid'].get_active():
Preference.value = unicode("true")
self.m_oEditor.ShowGrid(True)
else:
Preference.value = unicode("false")
self.m_oEditor.ShowGrid(False)
if Preference.name == "grid-int":
Preference.value = unicode(str(int(self.widgets['PREFGridInt'].get_value())))
self.m_oEditor.SetGridInterval(int(Preference.value))
if Preference.name == "server":
Preference.value = unicode(self.widgets['PREFServer'].get_text())
if Preference.name == "port":
Preference.value = unicode(str(int(self.widgets['PREFPort'].get_value())))
# -------------------------------------------
# Editor = "\n<editor>" + "\n</editor>\n"
# Block = "\n<block>" + "\n</block>\n"
# Connector = "\n<connector>" + "\n</connector>\n"
# Harpia = "<harpia>" + Editor + Block + Connector + "</harpia>"
# Opens the configFile for writing
FileHandle = open(self.configfile, "w")
# Writes the preferences
FileHandle.write(self.m_oPreferencesXML.xml())
# Close the FIle
FileHandle.close()
# -------------------------------------------
# Destroy the preferences window
self.widgets['preferences'].destroy()
# ----------------------------------------------------------------------
# Cancel Button handler function
def on_preferences_cancel_clicked(self, *args):
"""
This function is called whenever the cancel button on the preferences window is clicked.
It just exits the window without saving any changes.
"""
# Just destroy the window, without savind the changes
self.widgets['preferences'].destroy()
