def T_02_simulationPowerTest_A(product):
u"单板DAC电路测试-接入RSRB4单板发射模拟控制功率测试（MAX , MIN 2个值）"
try:
error = []
# 待测单板发射单音
# 模拟高，数字高
manulCheck(u'提示', u'请接入频谱仪开始测试')
proxy.open(PARAM["defaultNetOneIp"])
proxy._init_fpga()
fpga_pll.config()
proxy._write_fpga_reg(0x5a, 0x01)
proxy._write_fpga_reg(0x3e, 0x00)
tx_pll.config(5830)
proxy._write_fpga_reg(0x50, 0x02)
proxy._write_fpga_reg(0x51, 0x01)
proxy._write_fpga_reg(0x58, 0x01)
proxy._write_fpga_reg(0x59, 0x01)
proxy._write_fpga_reg(0x24, 0x47e)
proxy._write_fpga_reg(0x56, 0x3c)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
MaxMax = manulCheck(u'提示', u'最大功率是否达标')
if not MaxMax:
error.append("1.最大功率")
# 模拟高，数字低
proxy._write_fpga_reg(0x56, 0x24)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
MaxMin = manulCheck(u'提示', u'衰减数字信号后的功率是否达标')
if not MaxMin:
error.append("2.衰减数字信号后的功率")
# 模拟低，数字高
proxy._write_fpga_reg(0x24, 0xa28)
proxy._write_fpga_reg(0x56, 0x3c)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
MinMax = manulCheck(u'提示', u'衰减模拟信号后的功率是否达标')
if not MinMax:
error.append("3.衰减模拟信号后的功率")
# 关闭待测单板单音
proxy._write_fpga_reg(0x5a, 0x1)
proxy._write_fpga_reg(0x58, 0x0)
proxy._write_fpga_reg(0x59, 0x0)
proxy._write_fpga_reg(0x46, 0x1)
proxy._write_fpga_reg(0x3e, 0x0)
proxy._write_fpga_reg(0x5a, 0x0)
except Exception as e:
raise AbortTestException(message=e)
finally:
proxy.close()
errorStr = ",".join(error)
if error != []:
PARAM["failNum"] = "1"
raise TestItemFailException(failWeight=1, message=u"%s不达标" % errorStr)
return
def T_02_simulationPowerTest_A(product):
u"单板DAC电路测试-接入RSRB4单板发射模拟控制功率测试（MAX , MIN 2个值）"
try:
right = []
error = []
# 待测单板发射单音
# 模拟高，数字高
proxy.open(PARAM["defaultNetOneIp"])
proxy._init_fpga()
fpga_pll.config()
proxy._write_fpga_reg(0x5a, 0x01)
proxy._write_fpga_reg(0x3e, 0x00)
tx_pll.config(5830)
proxy._write_fpga_reg(0x50, 0x02)
proxy._write_fpga_reg(0x51, 0x01)
proxy._write_fpga_reg(0x58, 0x01)
proxy._write_fpga_reg(0x59, 0x01)
proxy._write_fpga_reg(0x24, 0x47e)
proxy._write_fpga_reg(0x56, 0x3c)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
time.sleep(0.5)
MaxMax = manulCheck(u'提示', u'最大功率MaxMax')
if MaxMax:
right.append("最大功率")
else:
error.append("最大功率")
# 模拟高，数字低
proxy._write_fpga_reg(0x56, 0x24)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
MaxMin = manulCheck(u'提示', u'衰减数字信号MaxMin')
if MaxMin:
right.append("衰减数字")
else:
error.append("衰减数字")
# 模拟低，数字高
proxy._write_fpga_reg(0x24, 0xa28)
proxy._write_fpga_reg(0x56, 0x3c)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
MinMax = manulCheck(u'提示', u'衰减模拟信号MinMax')
if MinMax:
right.append("衰减模拟")
else:
error.append("衰减模拟")
# 关闭待测单板单音
proxy._write_fpga_reg(0x5a, 0x1)
proxy._write_fpga_reg(0x58, 0x0)
proxy._write_fpga_reg(0x59, 0x0)
proxy._write_fpga_reg(0x46, 0x1)
proxy._write_fpga_reg(0x3e, 0x0)
proxy._write_fpga_reg(0x5a, 0x0)
except Exception as e:
raise AbortTestException(message=e)
finally:
proxy.close()
def T_04_RecvRSSITest222_A(product):
u"无连接测试-计算RSRB4单板接收射频信号的RSSI值测试"
manulCheck(u'提示', u'请断开信号源', check="ok")
try:
proxy.open(PARAM["defaultNetOneIp"])
fpga_pll.config()
proxy._write_fpga_reg(0x5a, 0x01)
rx_pll.config(5722)
proxy._write_fpga_reg(0x59, 0x00)
proxy._write_fpga_reg(0x50, 0x01)
proxy._write_fpga_reg(0x51, 0x02)
proxy._write_fpga_reg(0x58, 0x01)
proxy._write_fpga_reg(0x56, 0x00)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x52, 0x00)
proxy._write_fpga_reg(0x95, 0x03)
proxy._write_fpga_reg(0x96, 0x01)
proxy._write_fpga_reg(0x9b, 0x01)
proxy._write_fpga_reg(0x90, 0x01)
time.sleep(0.5)
# 工装发射单音
proxy._write_fpga_reg(0x52, 0x7f)
fpga_addr = "3f"
fpga_addr = int(str(fpga_addr), 16)
fpga_value = proxy._read_fpga_reg(fpga_addr)
print hex(fpga_value)[2:]
proxy._write_fpga_reg(0x5a, 0x1)
proxy._write_fpga_reg(0x46, 0x1)
proxy._write_fpga_reg(0x58, 0x0)
proxy._write_fpga_reg(0x5a, 0x0)
print "关闭接收"
except Exception as e:
raise AbortTestException(message=e)
finally:
proxy.close()
if fpga_value > int(PARAM["recvNothingLow"]) and fpga_value < int(PARAM["recvNothingHigh"]):
return {u"无输入接收RSSI值为：": fpga_value}
else:
PARAM["failNum"] = "1"
raise TestItemFailException(failWeight=1, message=u"无输入接收RSSI测试失败,值:%d:" % fpga_value)
def _T_05_RecvRSSITest_A(product):
u"接收RSSI值测试-RSRB4单板射频信号接收RSSI值测试"
try:
proxy.open(PARAM["defaultNetOneIp"])
fpga_pll.config()
proxy._write_fpga_reg(0x5a, 0x01)
rx_pll.config(5722)
proxy._write_fpga_reg(0x59, 0x00)
proxy._write_fpga_reg(0x50, 0x01)
proxy._write_fpga_reg(0x51, 0x02)
proxy._write_fpga_reg(0x58, 0x01)
proxy._write_fpga_reg(0x56, 0x00)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x52, 0x00)
proxy._write_fpga_reg(0x95, 0x03)
proxy._write_fpga_reg(0x96, 0x01)
proxy._write_fpga_reg(0x9b, 0x01)
proxy._write_fpga_reg(0x90, 0x01)
time.sleep(0.5)
# 工装发射单音
FrockSendRSSI()
fpga_addr = "3f"
fpga_addr = int(str(fpga_addr), 16)
fpga_value = proxy._read_fpga_reg(fpga_addr)
print hex(fpga_value)[2:]
proxyFrock._write_fpga_reg(0x5a, 0x1)
proxyFrock._write_fpga_reg(0x58, 0x0)
proxyFrock._write_fpga_reg(0x59, 0x0)
proxyFrock._write_fpga_reg(0x46, 0x1)
proxyFrock._write_fpga_reg(0x3e, 0x0)
proxyFrock._write_fpga_reg(0x5a, 0x0)
print "关闭工控单音"
proxy._write_fpga_reg(0x5a, 0x1)
proxy._write_fpga_reg(0x58, 0x0)
proxy._write_fpga_reg(0x59, 0x0)
proxy._write_fpga_reg(0x46, 0x1)
proxy._write_fpga_reg(0x3e, 0x0)
proxy._write_fpga_reg(0x5a, 0x0)
print "关闭单音"
except Exception as e:
raise AbortTestException(message=e)
finally:
proxy.close()
proxyFrock.close()
print fpga_value
if fpga_value > int(PARAM["recvRSSILow"]) and fpga_value < int(
PARAM["recvRSSIHigh"]):
return {u"RSSI值为：": fpga_value, u"16进制：": hex(fpga_value)[2:]}
raise TestItemFailException(failWeight=10, message=u"RSSI测试不通过")
def _T_04_simulationPowerTest_A(product):
u"发射模拟控制功率测试-RSRB4单板发射模拟控制功率测试（MAX , MIN 2个值）"
for i in range(10):
pingResult = pingIPOpen(PARAM["defaultNetOneIp"])
if pingResult == "ok":
break
time.sleep(5)
else:
raise TestItemFailException(failWeight=10, message=u"连接失败有可能是网口通信问题")
k = float(str(PARAM["frockSlope"]))
b = float(str(PARAM["frockB"]))
damping = float(str(PARAM["frockDamping"]))
error = float(str(PARAM["frockError"]))
RSSIDict = {}
try:
# 打开工装接收
proxyFrock.open(PARAM["defaultNetTwoIp"])
fpga_pll.config1()
proxyFrock._write_fpga_reg(0x5a, 0x01)
rx_pll.config1(5762)
proxyFrock._write_fpga_reg(0x59, 0x00)
proxyFrock._write_fpga_reg(0x50, 0x01)
proxyFrock._write_fpga_reg(0x51, 0x02)
proxyFrock._write_fpga_reg(0x58, 0x01)
proxyFrock._write_fpga_reg(0x56, 0x00)
proxyFrock._write_fpga_reg(0x57, 0x00)
proxyFrock._write_fpga_reg(0x57, 0x01)
proxyFrock._write_fpga_reg(0x57, 0x00)
proxyFrock._write_fpga_reg(0x52, 0x00)
proxyFrock._write_fpga_reg(0x95, 0x03)
proxyFrock._write_fpga_reg(0x96, 0x01)
proxyFrock._write_fpga_reg(0x9b, 0x01)
proxyFrock._write_fpga_reg(0x90, 0x01)
time.sleep(2)
# 待测单板发射单音
# 模拟高，数字高
proxy.open(PARAM["defaultNetOneIp"])
proxy._init_fpga()
fpga_pll.config()
proxy._write_fpga_reg(0x5a, 0x01)
proxy._write_fpga_reg(0x3e, 0x00)
tx_pll.config(5830)
proxy._write_fpga_reg(0x50, 0x02)
proxy._write_fpga_reg(0x51, 0x01)
proxy._write_fpga_reg(0x58, 0x01)
proxy._write_fpga_reg(0x59, 0x01)
proxy._write_fpga_reg(0x24, 0x47e)
proxy._write_fpga_reg(0x56, 0x3c)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
time.sleep(0.5)
MaxMaxValue = FrockRecvRSSI()
sendPower1 = (MaxMaxValue - b) / k + error + damping
MaxMaxKey = "MaxMax的发射功率为" + str(sendPower1)
if sendPower1 > float(PARAM["xxLow"]) and sendPower1 < float(
PARAM["xxHigh"]):
RSSIDict[MaxMaxKey] = "通过"
else:
RSSIDict[MaxMaxKey] = "失败"
# 模拟高，数字低
proxy._write_fpga_reg(0x56, 0x24)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
MaxMinValue = FrockRecvRSSI()
sendPower2 = (MaxMinValue - b) / k + error + damping
if sendPower2 > float(PARAM["xiLow"]) and sendPower2 < float(
PARAM["xiHigh"]):
RSSIDict["MaxMin的发射功率为" + str(sendPower2)] = "通过"
else:
RSSIDict["MaxMin的发射功率为" + str(sendPower2)] = "失败"
# 模拟低，数字高
proxy._write_fpga_reg(0x24, 0xa28)
proxy._write_fpga_reg(0x56, 0x3c)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
MinMaxValue = FrockRecvRSSI()
sendPower3 = (MinMaxValue - b) / k + error + damping
MinMaxKey = "MinMax的发射功率为" + str(sendPower3)
if sendPower3 > float(PARAM["ixLow"]) and sendPower3 < float(
PARAM["ixHigh"]):
RSSIDict[MinMaxKey] = "通过"
else:
RSSIDict[MinMaxKey] = "失败"
# 关闭待测单板单音
proxy._write_fpga_reg(0x5a, 0x1)
proxy._write_fpga_reg(0x58, 0x0)
proxy._write_fpga_reg(0x59, 0x0)
proxy._write_fpga_reg(0x46, 0x1)
proxy._write_fpga_reg(0x3e, 0x0)
proxy._write_fpga_reg(0x5a, 0x0)
# 关闭工装单音
proxyFrock._write_fpga_reg(0x5a, 0x1)
proxyFrock._write_fpga_reg(0x58, 0x0)
proxyFrock._write_fpga_reg(0x59, 0x0)
proxyFrock._write_fpga_reg(0x46, 0x1)
proxyFrock._write_fpga_reg(0x3e, 0x0)
proxyFrock._write_fpga_reg(0x5a, 0x0)
except Exception as e:
raise AbortTestException(message=e)
finally:
proxy.close()
proxyFrock.close()
for i in RSSIDict:
if RSSIDict[i] == "失败":
PARAM["failNum"] = "1"
message = "\n".join([a + ": " + RSSIDict[a] for a in RSSIDict])
raise TestItemFailException(failWeight=1,
message=unicode(message, "utf-8"))
RSSIstr = ",".join([a for a in RSSIDict])
return {RSSIstr: u"全部测试通过"}
def T_07_RecvRSSITest_A(product):
u"单板ADC电路测试-计算RSRB4单板接收射频信号的RSSI值测试"
proxy.open(PARAM["defaultNetOneIp"])
try:
fpga_pll.config()
proxy._write_fpga_reg(0x5a, 0x01)
rx_pll.config(5722)
proxy._write_fpga_reg(0x59, 0x00)
proxy._write_fpga_reg(0x50, 0x01)
proxy._write_fpga_reg(0x51, 0x02)
proxy._write_fpga_reg(0x58, 0x01)
proxy._write_fpga_reg(0x56, 0x00)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x52, 0x14)
proxy._write_fpga_reg(0x95, 0x03)
proxy._write_fpga_reg(0x96, 0x01)
proxy._write_fpga_reg(0x9b, 0x01)
proxy._write_fpga_reg(0x90, 0x01)
time.sleep(0.5)
# 工装发射单音
FrockSendRSSI()
fpga_addr = "3f"
fpga_addr = int(str(fpga_addr), 16)
fpga_value = proxy._read_fpga_reg(fpga_addr)
print hex(fpga_value)[2:]
proxy._write_fpga_reg(0x5a, 0x1)
proxy._write_fpga_reg(0x46, 0x1)
proxy._write_fpga_reg(0x58, 0x0)
proxy._write_fpga_reg(0x5a, 0x0)
print "关闭接收"
except Exception as e:
PARAM["failNum"] = "1"
raise TestItemFailException(failWeight=1, message=u"待测板接收异常，%s" % e)
finally:
proxy.close()
proxyFrock.open(PARAM["defaultNetTwoIp"])
try:
proxyFrock._write_fpga_reg(0x5a, 0x1)
proxyFrock._write_fpga_reg(0x58, 0x0)
proxyFrock._write_fpga_reg(0x59, 0x0)
proxyFrock._write_fpga_reg(0x46, 0x1)
proxyFrock._write_fpga_reg(0x3e, 0x0)
proxyFrock._write_fpga_reg(0x5a, 0x0)
print "关闭工控单音"
except Exception as e:
raise AbortTestException(message=u"工装异常，请检查工装，%s" % e)
finally:
proxyFrock.close()
if fpga_value > int(PARAM["recvRSSILow"]) and fpga_value < int(PARAM["recvRSSIHigh"]):
return {u"接收RSSI值为：":fpga_value}
else:
PARAM["failNum"] = "1"
raise TestItemFailException(failWeight=1, message=u"接收RSSI测试不通过,,值:%d:"%fpga_value)
def T_06_simulationPowerTest_A(product):
u"单板DAC电路测试-接入RSRB4单板发射模拟控制功率测试（MAX , MIN 2个值）"
k = float(str(PARAM["frockSlope"]))
b = float(str(PARAM["frockB"]))
damping = float(str(PARAM["frockDamping"]))
error = float(str(PARAM["frockError"]))
power1 = {}
power2 = {}
power3 = {}
RSSIDict = [power1,power2,power3]
proxyFrock.open(PARAM["defaultNetTwoIp"])
try:
# 打开工装接收
fpga_pll.config1()
proxyFrock._write_fpga_reg(0x5a, 0x01)
rx_pll.config1(5762)
proxyFrock._write_fpga_reg(0x59, 0x00)
proxyFrock._write_fpga_reg(0x50, 0x01)
proxyFrock._write_fpga_reg(0x51, 0x02)
proxyFrock._write_fpga_reg(0x58, 0x01)
proxyFrock._write_fpga_reg(0x56, 0x00)
proxyFrock._write_fpga_reg(0x57, 0x00)
proxyFrock._write_fpga_reg(0x57, 0x01)
proxyFrock._write_fpga_reg(0x57, 0x00)
proxyFrock._write_fpga_reg(0x52, 0x14)
proxyFrock._write_fpga_reg(0x95, 0x03)
proxyFrock._write_fpga_reg(0x96, 0x01)
proxyFrock._write_fpga_reg(0x9b, 0x01)
proxyFrock._write_fpga_reg(0x90, 0x01)
time.sleep(2)
except Exception as e:
raise AbortTestException(message=u"工装异常，请检查工装，%s" % e)
finally:
proxyFrock.close()
proxy.open(PARAM["defaultNetOneIp"])
try:
# 待测单板发射单音
# 模拟高，数字高
proxy._init_fpga()
fpga_pll.config()
proxy._write_fpga_reg(0x5a, 0x01)
proxy._write_fpga_reg(0x3e, 0x00)
tx_pll.config(5830)
proxy._write_fpga_reg(0x50, 0x02)
proxy._write_fpga_reg(0x51, 0x01)
proxy._write_fpga_reg(0x58, 0x01)
proxy._write_fpga_reg(0x59, 0x01)
proxy._write_fpga_reg(0x24, 0x47e)
proxy._write_fpga_reg(0x56, 0x3c)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
time.sleep(0.5)
MaxMaxValue = FrockRecvRSSI()
sendPower1 = (MaxMaxValue - b) / k +error +damping
MaxMaxKey = "最大发射功率为:" + str(round(sendPower1,2))
if sendPower1 > float(PARAM["xxLow"]) and sendPower1 < float(PARAM["xxHigh"]):
power1[MaxMaxKey] = "通过"
else:
power1[MaxMaxKey] = "失败"
# 模拟高，数字低
proxy._write_fpga_reg(0x56, 0x24)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
time.sleep(0.5)
MaxMinValue = FrockRecvRSSI()
sendPower2 = (MaxMinValue - b) / k +error +damping
differ2 = sendPower1 - sendPower2
MaxMinKey = "数字衰减发射功率为:" + str(round(sendPower2,2)) + ", 与最大功率差值为:" + str(round(differ2,2))
if differ2 > float(PARAM["xiLow"]) and differ2 < float(PARAM["xiHigh"]):
power2[MaxMinKey] = "通过"
else:
power2[MaxMinKey] = "失败"
# 模拟低，数字高
proxy._write_fpga_reg(0x24, 0xa28)
proxy._write_fpga_reg(0x56, 0x3c)
proxy._write_fpga_reg(0x57, 0x00)
proxy._write_fpga_reg(0x57, 0x01)
proxy._write_fpga_reg(0x57, 0x00)
time.sleep(0.5)
MinMaxValue = FrockRecvRSSI()
sendPower3 = (MinMaxValue - b) / k +error +damping
differ3 = sendPower1 - sendPower3
MinMaxKey = "模拟衰减发射功率为:" + str(round(sendPower3,2)) + ", 与最大功率差值为:" + str(round(differ3,2))
if differ3 > float(PARAM["ixLow"]) and differ3 < float(PARAM["ixHigh"]):
power3[MinMaxKey] = "通过"
else:
power3[MinMaxKey] = "失败"
# 关闭待测单板单音
proxy._write_fpga_reg(0x5a, 0x1)
proxy._write_fpga_reg(0x58, 0x0)
proxy._write_fpga_reg(0x59, 0x0)
proxy._write_fpga_reg(0x46, 0x1)
proxy._write_fpga_reg(0x3e, 0x0)
proxy._write_fpga_reg(0x5a, 0x0)
except Exception as e:
PARAM["failNum"] = "1"
raise TestItemFailException(failWeight=1, message=u"发射单音异常,%s" % e)
finally:
proxy.close()
# 关闭工装单音
# proxyFrock._write_fpga_reg(0x5a, 0x1)
# proxyFrock._write_fpga_reg(0x58, 0x0)
# proxyFrock._write_fpga_reg(0x59, 0x0)
# proxyFrock._write_fpga_reg(0x46, 0x1)
# proxyFrock._write_fpga_reg(0x3e, 0x0)
# proxyFrock._write_fpga_reg(0x5a, 0x0)
proxyFrock.open(PARAM["defaultNetTwoIp"])
try:
# 关闭接收
proxyFrock._write_fpga_reg(0x5a, 0x1)
proxyFrock._write_fpga_reg(0x46, 0x1)
proxyFrock._write_fpga_reg(0x58, 0x0)
proxyFrock._write_fpga_reg(0x5a, 0x0)
except Exception as e:
raise AbortTestException(message=u"工装异常，请检查工装，%s" % e)
finally:
proxyFrock.close()
resultStr = ""
for a in RSSIDict:
for b in a:
resultStr += b + " " + a[b] + "\n"
print resultStr
for i in range(3):
for j in RSSIDict[i]:
if RSSIDict[i][j] == "失败":
PARAM["failNum"] = "1"
raise TestItemFailException(failWeight=1, message=u"%s"%resultStr)
return {u"%s"%resultStr:u"全部通过"}