def main():
global arguments
error=None
configfile="./etc/config/ht_proxy_cfg.xml"
try:
client= ht_proxy_if.cht_socket_client(configfile, devicetype=ht_proxy_if.DT_MODEM)
except:
print("couldn't connect to server")
raise
trx=ht_transceiver.ctransceiver(client)
cfg=ht_yanetcom.cyanetcom(client)
if arguments['temp'] != 10.0:
error=cfg.set_tempniveau(arguments['temp'])
if error != None:
print("{0}".format(error))
if arguments['bart'] != 'none':
error=cfg.set_betriebsart(arguments['bart'])
if error != None:
print("{0}".format(error))
if arguments['cfg'] != 10:
error=trx.cfg_mode(arguments['cfg'])
if error != None:
print("{0}".format(error))
if arguments['adr'] != 0:
error=trx.cfg_deviceaddress(arguments['adr'])
if error != None:
print("{0}".format(error))
if arguments['rst'] != 0:
error=trx.reset()
if error != None:
print("{0}".format(error))
if len(sys.argv) > 1:
if '/' in str(sys.argv[1]):
binfile = str(sys.argv[1])
else:
binfile = os.path.join("./var/log", str(sys.argv[1]))
try:
print(" -- start binaer data logging to file: {0} --".format(binfile))
fobj = open(binfile, "wb")
except:
print("couldn't open file:{0}".format(binfile))
raise
try:
client = ht_proxy_if.cht_socket_client(configfile,
devicetype=ht_proxy_if.DT_MODEM)
except:
print(
"couldn't open proxy-client;check config-file:{0}".format(configfile))
raise
loop = True
while loop:
try:
fobj.write(client.read())
except (KeyboardInterrupt):
loop = False
except IOError:
loop = False
print("couldn't write to file:{0}".format(binfile))
raise
if len(sys.argv) > 1:
if '/' in str(sys.argv[1]):
binfile=str(sys.argv[1])
else:
binfile=os.path.join("./var/log", str(sys.argv[1]))
try:
print(" -- start binaer data logging to file: {0} --".format(binfile))
fobj=open(binfile,"wb")
except:
print("couldn't open file:{0}".format(binfile))
raise
try:
client=ht_proxy_if.cht_socket_client(configfile, devicetype=ht_proxy_if.DT_MODEM)
except:
print("couldn't open proxy-client;check config-file:{0}".format(configfile))
raise
loop=True
while loop:
try:
fobj.write(client.read())
except (KeyboardInterrupt):
loop=False
except IOError:
loop=False
print("couldn't write to file:{0}".format(binfile))
raise
def main(configfile, ems_bus):
global arguments
error = None
heater_circuit = 1
temp_mode = ht_const.HT_TEMPNIVEAU_NORMAL
try:
client= ht_proxy_if.cht_socket_client(configfile, devicetype = ht_proxy_if.DT_MODEM)
except:
print("couldn't connect to server")
raise
trx = ht_transceiver.ctransceiver(client)
cfg = ht_yanetcom.cyanetcom(client, ems_bus)
if ems_bus == False:
if arguments['hcircuit'] != 1:
heater_circuit = arguments['hcircuit']
if arguments['tempmod'] != ht_const.HT_TEMPNIVEAU_DUMMY:
temp_mode = arguments['tempmod']
else:
temp_mode = ht_const.HT_TEMPNIVEAU_NORMAL
if arguments['temp'] != 4.0:
error = cfg.set_tempniveau(arguments['temp'], hcircuit_nr = heater_circuit, temperatur_mode = temp_mode)
if error != None:
print("{0}".format(error))
if arguments['bart'] != 'none':
error = cfg.set_betriebsart(arguments['bart'])
if error != None:
print("{0}".format(error))
else:
if arguments['temp'] != 4.0:
# first setup to auto-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_AUTO)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (temporary)
error = cfg.set_tempniveau(arguments['temp'], temperatur_mode = ht_const.EMS_TEMP_MODE_TEMPORARY)
if error != None:
print("{0}".format(error))
if arguments['tempc1'] != 11.0:
# first setup to auto-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_AUTO)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (comfort1)
error=cfg.set_tempniveau(arguments['tempc1'], temperatur_mode = ht_const.EMS_TEMP_MODE_COMFORT1)
if error != None:
print("{0}".format(error))
if arguments['tempc2'] != 12.0:
# first setup to auto-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_AUTO)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (comfort2)
error=cfg.set_tempniveau(arguments['tempc2'], temperatur_mode = ht_const.EMS_TEMP_MODE_COMFORT2)
if error != None:
print("{0}".format(error))
if arguments['tempc3'] != 13.0:
# first setup to auto-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_AUTO)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (comfort3)
error=cfg.set_tempniveau(arguments['tempc3'], temperatur_mode = ht_const.EMS_TEMP_MODE_COMFORT3)
if error != None:
print("{0}".format(error))
if arguments['tempeco'] != 14.0:
# first setup to auto-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_AUTO)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (eco)
error=cfg.set_tempniveau(arguments['tempeco'], temperatur_mode = ht_const.EMS_TEMP_MODE_ECO)
if error != None:
print("{0}".format(error))
if arguments['tempman'] != 15.0:
# first setup to manual-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_MANUAL)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (manual)
error=cfg.set_tempniveau(arguments['tempman'], temperatur_mode = ht_const.EMS_TEMP_MODE_MANUAL)
if error != None:
print("{0}".format(error))
if arguments['ecomode'] != -1:
error=cfg.set_ecomode(arguments['ecomode'])
if error != None:
print("{0}".format(error))
if arguments['bart'] != 'none':
if str(arguments['bart']).lower() in ('manual','man','m'):
omode = ht_const.EMS_OMODE_MANUAL
else:
omode = ht_const.EMS_OMODE_AUTO
error=cfg.set_operation_mode(omode)
if error != None:
print("{0}".format(error))
if arguments['adr'] != 0:
error=trx.cfg_deviceaddress(arguments['adr'])
if error != None:
print("{0}".format(error))
if arguments['rst'] != 0:
error=trx.reset()
if error != None:
print("{0}".format(error))
def main(configfile, ems_bus):
global arguments
error = None
heater_circuit = 1
temp_mode = ht_const.HT_TEMPNIVEAU_NORMAL
try:
client = ht_proxy_if.cht_socket_client(configfile,
devicetype=ht_proxy_if.DT_MODEM)
except:
print("couldn't connect to server")
raise
trx = ht_transceiver.ctransceiver(client)
cfg = ht_yanetcom.cyanetcom(client, ems_bus)
if ems_bus == False:
if arguments['hcircuit'] != 1:
heater_circuit = arguments['hcircuit']
if arguments['tempmod'] != ht_const.HT_TEMPNIVEAU_DUMMY:
temp_mode = arguments['tempmod']
else:
temp_mode = ht_const.HT_TEMPNIVEAU_NORMAL
if arguments['temp'] != 4.0:
error = cfg.set_tempniveau(arguments['temp'],
hcircuit_nr=heater_circuit,
temperatur_mode=temp_mode)
if error != None:
print("{0}".format(error))
if arguments['bart'] != 'none':
error = cfg.set_betriebsart(arguments['bart'])
if error != None:
print("{0}".format(error))
else:
if arguments['temp'] != 4.0:
# first setup to auto-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_AUTO)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (temporary)
error = cfg.set_tempniveau(
arguments['temp'],
temperatur_mode=ht_const.EMS_TEMP_MODE_TEMPORARY)
if error != None:
print("{0}".format(error))
if arguments['tempc1'] != 11.0:
# first setup to auto-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_AUTO)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (comfort1)
error = cfg.set_tempniveau(
arguments['tempc1'],
temperatur_mode=ht_const.EMS_TEMP_MODE_COMFORT1)
if error != None:
print("{0}".format(error))
if arguments['tempc2'] != 12.0:
# first setup to auto-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_AUTO)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (comfort2)
error = cfg.set_tempniveau(
arguments['tempc2'],
temperatur_mode=ht_const.EMS_TEMP_MODE_COMFORT2)
if error != None:
print("{0}".format(error))
if arguments['tempc3'] != 13.0:
# first setup to auto-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_AUTO)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (comfort3)
error = cfg.set_tempniveau(
arguments['tempc3'],
temperatur_mode=ht_const.EMS_TEMP_MODE_COMFORT3)
if error != None:
print("{0}".format(error))
if arguments['tempeco'] != 14.0:
# first setup to auto-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_AUTO)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (eco)
error = cfg.set_tempniveau(
arguments['tempeco'],
temperatur_mode=ht_const.EMS_TEMP_MODE_ECO)
if error != None:
print("{0}".format(error))
if arguments['tempman'] != 15.0:
# first setup to manual-mode
error = cfg.set_operation_mode(ht_const.EMS_OMODE_MANUAL)
if error != None:
print("{0}".format(error))
time.sleep(1)
# second setup temperatur (manual)
error = cfg.set_tempniveau(
arguments['tempman'],
temperatur_mode=ht_const.EMS_TEMP_MODE_MANUAL)
if error != None:
print("{0}".format(error))
if arguments['ecomode'] != -1:
error = cfg.set_ecomode(arguments['ecomode'])
if error != None:
print("{0}".format(error))
if arguments['bart'] != 'none':
if str(arguments['bart']).lower() in ('manual', 'man', 'm'):
omode = ht_const.EMS_OMODE_MANUAL
else:
omode = ht_const.EMS_OMODE_AUTO
error = cfg.set_operation_mode(omode)
if error != None:
print("{0}".format(error))
if arguments['adr'] != 0:
error = trx.cfg_deviceaddress(arguments['adr'])
if error != None:
print("{0}".format(error))
if arguments['rst'] != 0:
error = trx.reset()
if error != None:
print("{0}".format(error))