def _declr(self):
addClkRstn(self)
self.dataOut = VldSynced()._m()
self.dataOut.DATA_WIDTH.set(8)
self.rxd = Signal()
def _declr(self):
addClkRstn(self)
with self._paramsShared():
self.a0 = VldSynced()
self.a1 = VldSynced()
self.a2 = VldSynced()
self.b = HObjList(VldSynced() for _ in range(int(self.LEN)))._m()
def _declr(self):
addClkRstn(self)
with self._paramsShared():
self.a = HObjList(VldSynced() for _ in range(self.LEN))
self.b0 = VldSynced()._m()
self.b1 = VldSynced()._m()
self.b2 = VldSynced()._m()
def _declr(self):
LEN = 2
addClkRstn(self)
with self._paramsShared():
self.a = HObjList(VldSynced() for _ in range(LEN))
self.b = HObjList(VldSynced() for _ in range(LEN))._m()
self.u0 = SimpleSubunit()
self.u1 = SimpleSubunit()
def _mkFieldIntf(self, parent: Union[StructIntf, UnionSource],
structField: HStructField):
t = structField.dtype
path = parent._field_path / structField.name
if isinstance(t, HUnion):
i = UnionSource(t, path, parent._instantiateFieldFn)
i._fieldsToInterfaces = parent._fieldsToInterfaces
return i
elif isinstance(t, HStruct):
i = StructIntf(t, path, parent._instantiateFieldFn)
i._fieldsToInterfaces = parent._fieldsToInterfaces
return i
elif isinstance(t, HStream):
if self.SHARED_READY:
raise NotImplementedError(t)
else:
i = AxiStream()
i._updateParamsFrom(self)
return i
else:
if self.SHARED_READY:
i = VldSynced()
else:
i = Handshaked()
i.DATA_WIDTH = structField.dtype.bit_length()
return i
def _declr(self):
addClkRstn(self)
self.dataOut = VldSynced()._m()
self.dataOut.DATA_WIDTH.set(8)
self.rxd = Signal()
def _declr(self):
addClkRstn(self)
with self._paramsShared():
if self.MASK_GRANULARITY is None:
self.dataIn = VldSynced()
else:
self.dataIn = DataMaskLastHs()
self.dataOut = VectSignal(self.POLY_WIDTH)._m()
class OneHotToBin(Unit):
"""
Converts one hot signal to binary, bin.vld is high when oneHot != 0
.. hwt-autodoc::
"""
def _config(self):
self.ONE_HOT_WIDTH = Param(8)
def _declr(self):
self.oneHot = VectSignal(self.ONE_HOT_WIDTH)
self.bin = VldSynced()._m()
self.bin.DATA_WIDTH = log2ceil(self.ONE_HOT_WIDTH)
def _impl(self):
self.bin.data(oneHotToBin(self, self.oneHot))
self.bin.vld(Or(*[bit for bit in iterBits(self.oneHot)]))
def _declr(self):
addClkRstn(self)
with self._paramsShared():
self.din = Handshaked()
self.dout = VldSynced()._m()
self.tx = UartTx()
self.rx = UartRx()
class OneHotToBin(Unit):
"""
Converts one hot signal to binary, bin.vld is high when oneHot != 0
.. hwt-schematic::
"""
def _config(self):
self.ONE_HOT_WIDTH = Param(8)
def _declr(self):
self.oneHot = VectSignal(self.ONE_HOT_WIDTH)
self.bin = VldSynced()._m()
self.bin.DATA_WIDTH.set(log2ceil(self.ONE_HOT_WIDTH))
def _impl(self):
self.bin.data(oneHotToBin(self, self.oneHot))
self.bin.vld(Or(*[bit for bit in iterBits(self.oneHot)]))
def _impl(self):
ITEMS = self.addr_cam.ITEMS
item_vld = self._reg("item_vld", Bits(ITEMS), def_val=0)
waiting_transaction_id = self._sig("waiting_transaction_id",
self.s.ar.id._dtype[ITEMS])
waiting_transaction_vld = self._reg("waiting_transaction_vld",
Bits(ITEMS),
def_val=0)
read_ack = self._sig("read_ack")
# if the parent transaction is about to finish how we need to copy the response now
data_copy_override = VldSynced()
data_copy_override.DATA_WIDTH = self.ID_WIDTH
self.data_copy_override = data_copy_override
self.read_request_section(read_ack, item_vld, waiting_transaction_id,
waiting_transaction_vld, data_copy_override)
self.read_data_section(read_ack, waiting_transaction_id,
waiting_transaction_vld, data_copy_override)
propagateClkRstn(self)
def _mkFieldIntf(self, parent: Union[StructIntf, UnionSource],
structField: HStructField):
t = structField.dtype
if isinstance(t, HUnion):
return UnionSource(t, parent._instantiateFieldFn)
elif isinstance(t, HStruct):
return StructIntf(t, parent._instantiateFieldFn)
else:
if self.SHARED_READY:
i = VldSynced()
else:
i = Handshaked()
i.DATA_WIDTH.set(structField.dtype.bit_length())
return i
def _declr(self):
assert int(self.DEPTH) > 0, \
"Fifo is disabled in this case, do not use it entirely"
assert int(self.DEPTH) > 1, \
"Use register instead"
addClkRstn(self)
with self._paramsShared():
self.dataIn = FifoWriter()
self.dataOut = FifoReader()._m()
fc = self.dataOut_copy_frame = VldSynced()
fc.DATA_WIDTH = 1
self._declr_size_and_space()
if self.EXPORT_SIZE or self.EXPORT_SPACE:
raise NotImplementedError()
def _declr(self):
addClkRstn(self)
with self._paramsShared():
self.bus = Axi4Lite()
self.signalLoop = SigLoop()
self.signalIn = VectSignal(self.DATA_WIDTH)
self.regCntrlLoop = Loop(RegCntrl)
self.regCntrlOut = RegCntrl()._m()
self.vldSyncedLoop = Loop(VldSynced)
self.vldSyncedOut = VldSynced()._m()
with self._paramsShared(exclude=({"ADDR_WIDTH"}, set())):
self.bramLoop = Loop(BramPort_withoutClk)
self.bramLoop.ADDR_WIDTH = 2
self.bramOut = BramPort_withoutClk()._m()
self.bramOut.ADDR_WIDTH = 2
def _declr(self):
VldSynced._declr(self)
if self.DATA_WIDTH > 8:
self.mask = VectSignal(self.DATA_WIDTH // 8)
self.err = Signal()
self.last = Signal()
def _declr(self):
addClkRstn(self)
with self._paramsShared():
self.dataIn = VldSynced()
self.dataOut = VectSignal(self.POLY_WIDTH)._m()
def read_request_section(self, read_ack: RtlSignal, item_vld: RtlSignal,
waiting_transaction_id: RtlSignal,
waiting_transaction_vld: RtlSignal,
data_copy_override: VldSynced):
s = self.s
m = self.m
addr_cam = self.addr_cam
ITEMS = addr_cam.ITEMS
addr_cam_out = self.add_addr_cam_out_reg(item_vld)
with self._paramsShared():
s_ar_tmp = self.s_ar_tmp = AxiSReg(s.AR_CLS)
last_cam_insert_match = self._reg("last_cam_insert_match",
Bits(ITEMS),
def_val=0)
match_res = rename_signal(
self, item_vld & (addr_cam_out.data | last_cam_insert_match)
& ~waiting_transaction_vld, "match_res")
blocking_access = rename_signal(
self, s.ar.valid & (item_vld[s.ar.id] |
(s_ar_tmp.dataOut.valid &
(s.ar.id._eq(s_ar_tmp.dataOut.id)))),
"blocking_access")
s_ar_node = StreamNode(
[s.ar],
[addr_cam.match[0], s_ar_tmp.dataIn],
)
s_ar_node.sync(~blocking_access)
# s_ar_node_ack = s_ar_node.ack() & ~blocking_access
s_ar_tmp.dataIn(s.ar, exclude={s.ar.valid, s.ar.ready})
parent_transaction_id = oneHotToBin(self, match_res,
"parent_transaction_id")
m_ar_node = StreamNode(
[s_ar_tmp.dataOut, addr_cam_out],
[m.ar],
extraConds={m.ar: match_res._eq(0)},
skipWhen={m.ar: match_res != 0},
)
m_ar_node.sync()
m.ar(s_ar_tmp.dataOut, exclude={m.ar.valid, m.ar.ready})
addr_cam.match[0].data(s.ar.addr[:self.CACHE_LINE_OFFSET_BITS])
ar_ack = rename_signal(self, m_ar_node.ack(), "ar_ack")
# insert into cam on empty position specified by id of this transaction
acw = addr_cam.write
acw.addr(s_ar_tmp.dataOut.id)
acw.data(s_ar_tmp.dataOut.addr[:self.CACHE_LINE_OFFSET_BITS])
acw.vld(addr_cam_out.vld)
#If(s_ar_node_ack,
last_cam_insert_match(
binToOneHot(
s_ar_tmp.dataOut.id,
en=~blocking_access & s.ar.valid & s_ar_tmp.dataOut.valid
& s_ar_tmp.dataOut.addr[:self.CACHE_LINE_OFFSET_BITS]._eq(
s.ar.addr[:self.CACHE_LINE_OFFSET_BITS])))
#)
for trans_id in range(ITEMS):
# it becomes ready if we are requested for it on "s" interface
this_trans_start = s_ar_tmp.dataOut.id._eq(trans_id) & \
(data_copy_override.vld | ar_ack)
# item becomes invalid if we read last data word
this_trans_end = read_ack & s.r.id._eq(trans_id) & s.r.last
this_trans_end = rename_signal(self, this_trans_end,
f"this_trans_end{trans_id:d}")
item_vld[trans_id](apply_set_and_clear(item_vld[trans_id],
this_trans_start,
this_trans_end))
waiting_transaction_start = (ar_ack & (match_res != 0)
& parent_transaction_id._eq(trans_id)
& ~this_trans_end)
# note: this_trans_end in this context is for parent transactio
# which was not started just now, so it may be ending just now
waiting_transaction_start = rename_signal(
self, waiting_transaction_start,
f"waiting_transaction_start{trans_id:d}")
_waiting_transaction_vld = apply_set_and_clear(
waiting_transaction_vld[trans_id], waiting_transaction_start,
this_trans_end)
waiting_transaction_vld[trans_id](rename_signal(
self, _waiting_transaction_vld,
f"waiting_transaction_vld{trans_id:d}"))
If(
self.clk._onRisingEdge(),
If((match_res != 0) & ar_ack,
waiting_transaction_id[parent_transaction_id](
s_ar_tmp.dataOut.id)))
# parent transaction is finishing just now
# we need to quickly grab the data in data buffer and copy it also
# for this transaction
data_copy_override.vld(s_ar_tmp.dataOut.valid & read_ack
& (match_res != 0)
& s.r.id._eq(parent_transaction_id) & s.r.last)
data_copy_override.data(s_ar_tmp.dataOut.id)
class UartRx(Unit):
"""
UART Rx channel controller
.. hwt-schematic::
"""
def _config(self):
self.FREQ = Param(int(100e6))
self.BAUD = Param(115200)
self.OVERSAMPLING = Param(16)
def _declr(self):
addClkRstn(self)
self.dataOut = VldSynced()._m()
self.dataOut.DATA_WIDTH.set(8)
self.rxd = Signal()
def _impl(self):
START_BIT = 0
STOP_BIT = 1
os = int(self.OVERSAMPLING)
baud = int(self.BAUD)
freq = int(self.FREQ)
assert freq >= baud * os, "Frequency too low for current Baud rate and oversampling"
assert os >= 8 and (os & (os - 1)) == 0, "Invalid oversampling value"
propagateClkRstn(self)
clkBuilder = ClkBuilder(self, self.clk)
en = self._reg("en", defVal=0)
first = self._reg("first", defVal=1)
RxD_data = self._reg("RxD_data", Bits(1 + 8))
startBitWasNotStartbit = self._sig("startBitWasNotStartbit")
# it can happen that there is just glitch on wire and bit was not startbit only begin was resolved wrong
# eval because otherwise vhdl int overflows
sampleTick = clkBuilder.timer(
("sampleTick", self.FREQ // self.BAUD // self.OVERSAMPLING),
enableSig=en,
rstSig=~en)
# synchronize RxD to our clk domain
RxD_sync = self._reg("RxD_sync", defVal=1)
RxD_sync(self.rxd)
rxd, rxd_vld = clkBuilder.oversample(RxD_sync,
self.OVERSAMPLING,
sampleTick,
rstSig=~en)
isLastBit = clkBuilder.timer(("isLastBitTick", 10),
enableSig=rxd_vld,
rstSig=~en)
If(
en,
If(
rxd_vld,
RxD_data(Concat(rxd, RxD_data[9:1])), # shift data from left
If(
startBitWasNotStartbit,
en(0),
first(1),
).Else(
en(~isLastBit),
first(isLastBit),
))).Elif(
RxD_sync._eq(START_BIT),
# potential start bit detected, begin scanning sequence
en(1),
)
startBitWasNotStartbit(first & rxd_vld & (rxd != START_BIT))
self.dataOut.vld(isLastBit & RxD_data[0]._eq(START_BIT)
& rxd._eq(STOP_BIT))
self.dataOut.data(RxD_data[9:1])
def _declr(self):
self.oneHot = VectSignal(self.ONE_HOT_WIDTH)
self.bin = VldSynced()._m()
self.bin.DATA_WIDTH.set(log2ceil(self.ONE_HOT_WIDTH))
def vldSynced(name, width):
a = VldSynced()
a.DATA_WIDTH = width
a._name = name
a._loadDeclarations()
return a
def _declr(self):
self.din = VldSynced()
self.dout = VldSynced()._m()
def _declr(self):
HsJoinPrioritized._declr(self)
addClkRstn(self)
if self.EXPORT_SELECTED:
s = self.selectedOneHot = VldSynced()._m()
s._replaceParam(s.DATA_WIDTH, self.INPUTS)
def _declr(self):
with self._paramsShared():
self.c = VldSynced()
self.d = VldSynced()._m()
def _declr(self):
addClkRstn(self)
with self._paramsShared():
L = int(self.LEN)
self.a = HObjList(VldSynced() for _ in range(L))
self.b = HObjList(VldSynced() for _ in range(L))._m()
def _declr(self):
self.oneHot = VectSignal(self.ONE_HOT_WIDTH)
self.bin = VldSynced()._m()
self.bin.DATA_WIDTH = log2ceil(self.ONE_HOT_WIDTH)
class UartRx(Unit):
"""
UART Rx channel controller
.. hwt-schematic::
"""
def _config(self):
self.FREQ = Param(int(100e6))
self.BAUD = Param(115200)
self.OVERSAMPLING = Param(16)
def _declr(self):
addClkRstn(self)
self.dataOut = VldSynced()._m()
self.dataOut.DATA_WIDTH.set(8)
self.rxd = Signal()
def _impl(self):
START_BIT = 0
STOP_BIT = 1
os = int(self.OVERSAMPLING)
baud = int(self.BAUD)
freq = int(self.FREQ)
assert freq >= baud * os, "Frequency too low for current Baud rate and oversampling"
assert os >= 8 and (os & (os - 1)) == 0, "Invalid oversampling value"
propagateClkRstn(self)
clkBuilder = ClkBuilder(self, self.clk)
en = self._reg("en", defVal=0)
first = self._reg("first", defVal=1)
RxD_data = self._reg("RxD_data", Bits(1 + 8))
startBitWasNotStartbit = self._sig("startBitWasNotStartbit")
# it can happen that there is just glitch on wire and bit was not startbit only begin was resolved wrong
# eval because otherwise vhdl int overflows
sampleTick = clkBuilder.timer(("sampleTick", self.FREQ // self.BAUD // self.OVERSAMPLING),
enableSig=en,
rstSig=~en)
# synchronize RxD to our clk domain
RxD_sync = self._reg("RxD_sync", defVal=1)
RxD_sync(self.rxd)
rxd, rxd_vld = clkBuilder.oversample(RxD_sync,
self.OVERSAMPLING,
sampleTick,
rstSig=~en)
isLastBit = clkBuilder.timer(("isLastBitTick", 10),
enableSig=rxd_vld,
rstSig=~en)
If(en,
If(rxd_vld,
RxD_data(Concat(rxd, RxD_data[9:1])), # shift data from left
If(startBitWasNotStartbit,
en(0),
first(1),
).Else(
en(~isLastBit),
first(isLastBit),
)
)
).Elif(RxD_sync._eq(START_BIT),
# potential start bit detected, begin scanning sequence
en(1),
)
startBitWasNotStartbit(first & rxd_vld & (rxd != START_BIT))
self.dataOut.vld(isLastBit & RxD_data[0]._eq(START_BIT) & rxd._eq(STOP_BIT))
self.dataOut.data(RxD_data[9:1])