def recordCodes(deviceName):
"""Ask the user what the button press should be called and return as a dict of
name:code key/value pairs. Similar to the Lirc irrecord tool"""
serialDevice = serial.Serial(deviceName)
toy = IrToy(serialDevice)
codes = {}
while True:
try:
input = raw_input
except NameError:
pass
label = input("Please enter a name for the button you will press, or Enter to finish:\n")
if label == "":
break
else:
toy.reset()
print("press the remote control button once for the %s button:" % label)
codes[label] = toy.receive()
serialDevice.close()
return codes
def recordCodes(deviceName):
'''Ask the user what the button press should be called and return as a dict of
name:code key/value pairs. Similar to the Lirc irrecord tool'''
serialDevice = serial.Serial(deviceName)
toy = IrToy(serialDevice)
codes = {}
while True:
try:
input = raw_input
except NameError:
pass
label = input('Please enter a name for the button you will press, or Enter to finish:\n')
if label == '':
break
else:
toy.reset()
print('press the remote control button once for the %s button:' % label)
codes[label] = toy.receive()
serialDevice.close()
return codes
class TestIrToy(unittest.TestCase):
def setUp(self):
self.serialMock = SerialMock()
self.toy = IrToy(self.serialMock)
self.toy.sleepTime = 0
def testTransmit(self):
# length of code sent must be even
self.assertRaises(ValueError, self.toy.transmit, [10])
# set the expected results from read(): protocol version, handshake ('>' converts to 62),
# byte count transmitted, and completion code.
self.serialMock.setReadCode([bytearray([62]), bytearray([62]), bytearray([0,0,0,1]), b'C', b'S01'])
self.toy.transmit([10,10])
# when transmitting, we expect a reset (five 0x00), 'S' to enter sampling mode, 0x26 for enable handshake,
# 0x25 to enable notify on transmit, 0x24 to enable transmit byte count, and 0x03 to start the transmission,
# then the list of codes to transmit (always ending with 0xff, 0xff), and another reset. See DP link at top of this file for more info.
expectedHistory = [[0x00, 0x00, 0x00, 0x00, 0x00],
'v',
[0x00, 0x00, 0x00, 0x00, 0x00],
'v',
[0x00, 0x00, 0x00, 0x00, 0x00],
b'S', [0x26], [0x25], [0x24], [0x03],
[10, 10, 0xff, 0xff],
[0x00, 0x00, 0x00, 0x00, 0x00],
b'S']
self.assertEqual(self.serialMock.writeHistory, expectedHistory)
def testReceive(self):
# pretend to be receiving the following signals from the IR Toy, must end with 0xff,0xff (same as 255, means no signal)
# or the code will keep recording indefinitely. First element is for the protocol version, since receive() resets the toy
self.serialMock.setReadCode([bytearray([62]), bytearray([1]), bytearray([2]), bytearray([0xff]), bytearray([0xff])])
readSignal = self.toy.receive()
self.assertEqual(readSignal, [1, 2, 0xff, 0xff])
def XtestMultipleTransmits(self):
# tracking down a bug that shows itself when we transmit using the same object for more than one transmit. Method
# name starts with X to avoid running with other tests, this one is run manually since you need the IR Toy hardware
# and the pySerial module which isn't necessarily installed by default.
# IR code that causes an issue, any code would probably work for this purpose.
irCode=[1, 159, 0, 212, 0, 26, 0, 25, 0, 26, 0, 78, 0, 26, 0, 25, 0, 26, 0, 25, 0, 26, 0, 78, 0, 26, 0,
25, 0, 27, 0, 77, 0, 26, 0, 77, 0, 26, 0, 78, 0, 26, 0, 26, 0, 26, 0, 78, 0, 26, 0, 78, 0, 26,
0, 25, 0, 26, 0, 78, 0, 26, 0, 78, 0, 26, 0, 24, 0, 28, 0, 76, 0, 27, 0, 25, 0, 27, 0, 77, 0, 27,
0, 25, 0, 27, 0, 24, 0, 27, 0, 24, 0, 28, 0, 24, 0, 28, 0, 24, 0, 28, 0, 24, 0, 27, 0, 76, 0, 28,
0, 24, 0, 27, 0, 77, 0, 27, 0, 76, 0, 27, 0, 76, 0, 28, 0, 76, 0, 27, 0, 76, 0, 28, 7, 15, 1, 160,
0, 107, 0, 27, 255, 255] #Onkyo TX-SR508 mute
import serial
serialDevice = serial.Serial('/dev/ttyACM0')
#serialDevice = self.serialMock
# re-using a single object with multiple transmits
toy = IrToy(serialDevice)
for i in range(5):
toy.transmit(irCode)
# using a new object for each transmit
for i in range(5):
toy2 = IrToy(serialDevice)
toy2.transmit(irCode)
class TestIrToy(unittest.TestCase):
def setUp(self):
self.serialMock = SerialMock()
self.toy = IrToy(self.serialMock)
self.toy.sleepTime = 0
def testTransmit(self):
# length of code sent must be even
self.assertRaises(ValueError, self.toy.transmit, [10])
# set the expected results from read(): protocol version, handshake ('>' converts to 62),
# byte count transmitted, and completion code.
self.serialMock.setReadCode([
bytearray([62]),
bytearray([62]),
bytearray([0, 0, 0, 1]), b'C', b'S01'
])
self.toy.transmit([10, 10])
# when transmitting, we expect a reset (five 0x00), 'S' to enter sampling mode, 0x26 for enable handshake,
# 0x25 to enable notify on transmit, 0x24 to enable transmit byte count, and 0x03 to start the transmission,
# then the list of codes to transmit (always ending with 0xff, 0xff), and another reset. See DP link at top of this file for more info.
expectedHistory = [[0x00, 0x00, 0x00, 0x00, 0x00], 'v',
[0x00, 0x00, 0x00, 0x00, 0x00], 'v',
[0x00, 0x00, 0x00, 0x00, 0x00], b'S', [0x26],
[0x25], [0x24], [0x03], [10, 10, 0xff, 0xff],
[0x00, 0x00, 0x00, 0x00, 0x00], b'S']
self.assertEqual(self.serialMock.writeHistory, expectedHistory)
def testReceive(self):
# pretend to be receiving the following signals from the IR Toy, must end with 0xff,0xff (same as 255, means no signal)
# or the code will keep recording indefinitely. First element is for the protocol version, since receive() resets the toy
self.serialMock.setReadCode([
bytearray([62]),
bytearray([1]),
bytearray([2]),
bytearray([0xff]),
bytearray([0xff])
])
readSignal = self.toy.receive()
self.assertEqual(readSignal, [1, 2, 0xff, 0xff])
def XtestMultipleTransmits(self):
# tracking down a bug that shows itself when we transmit using the same object for more than one transmit. Method
# name starts with X to avoid running with other tests, this one is run manually since you need the IR Toy hardware
# and the pySerial module which isn't necessarily installed by default.
# IR code that causes an issue, any code would probably work for this purpose.
irCode = [
1, 159, 0, 212, 0, 26, 0, 25, 0, 26, 0, 78, 0, 26, 0, 25, 0, 26, 0,
25, 0, 26, 0, 78, 0, 26, 0, 25, 0, 27, 0, 77, 0, 26, 0, 77, 0, 26,
0, 78, 0, 26, 0, 26, 0, 26, 0, 78, 0, 26, 0, 78, 0, 26, 0, 25, 0,
26, 0, 78, 0, 26, 0, 78, 0, 26, 0, 24, 0, 28, 0, 76, 0, 27, 0, 25,
0, 27, 0, 77, 0, 27, 0, 25, 0, 27, 0, 24, 0, 27, 0, 24, 0, 28, 0,
24, 0, 28, 0, 24, 0, 28, 0, 24, 0, 27, 0, 76, 0, 28, 0, 24, 0, 27,
0, 77, 0, 27, 0, 76, 0, 27, 0, 76, 0, 28, 0, 76, 0, 27, 0, 76, 0,
28, 7, 15, 1, 160, 0, 107, 0, 27, 255, 255
] #Onkyo TX-SR508 mute
import serial
serialDevice = serial.Serial('/dev/ttyACM0')
#serialDevice = self.serialMock
# re-using a single object with multiple transmits
toy = IrToy(serialDevice)
for i in range(5):
toy.transmit(irCode)
# using a new object for each transmit
for i in range(5):
toy2 = IrToy(serialDevice)
toy2.transmit(irCode)