def TE_HIGH_ACC_RAW(handle,AIN_names):
numAddresses = len(AIN_names)
aScanList = ljm.namesToAddresses(numAddresses, AIN_names)[0]
scanRate = 10000
scansPerRead = scanRate
aNames = ["AIN_ALL_NEGATIVE_CH", "AIN_ALL_RANGE", "STREAM_SETTLING_US",
"STREAM_RESOLUTION_INDEX"]
aValues = [ljm.constants.GND, 10.0, 0, 0] #single-ended, +/-10V, 0 (default),
#0 (default)
ljm.eWriteNames(handle, len(aNames), aNames, aValues)
# Configure and start stream
scanRate = ljm.eStreamStart(handle, scansPerRead, numAddresses, aScanList, scanRate)
ret = ljm.eStreamRead(handle)
acc_high_z_val = ret[0]
# acc_high_z_val=[data[i]for i in range(0,len(data),1)]
# ACC_LOW_Y_value=[data[i]for i in range(1,len(data),3)]
# ACC_LOW_Z_value=[data[i]for i in range(2,len(data),3)]
ljm.eStreamStop(handle)
return acc_high_z_val
def connect(self):
try:
self.handle = ljm.openS(self.params['device'],
self.params['connection'],
self.params['devid'])
info = ljm.getHandleInfo(self.handle)
self.deviceType = info[0]
assert self.deviceType in [ljm.constants.dtT7, ljm.constants.dtT4]
if self.deviceType == ljm.constants.dtT7:
self._command('AIN_ALL_RANGE', self.params['arange'])
self._command('AIN_ALL_NEGATIVE_CH', ljm.constants.GND)
log.info('Connected to LabJack (%i).' % (info[2]))
self.clock = 80e6 # internal clock frequency
try:
''' Stop streaming if currently running '''
ljm.eStreamStop(self.handle)
except:
pass
return 1
except Exception as e:
log.error('Failed to connect to LabJack (%s): %s.' %
(self.params['devid'], e))
def close(self):
"""Close the device."""
try:
ljm.eStreamStop(self.handle)
except ljm.LJMError: #if no streamer open
pass
finally:
ljm.close(self.handle)
print ("LabJack device closed")
def signal_handler(signal, frame):
global handle
print("\nStop Stream")
ljm.eStreamStop(handle)
# Close handle
ljm.close(handle)
print('You pressed Ctrl+C!')
sys.exit(0)
def close_streamer(self):
"""
Special method called if streamer is open.
"""
if self.verbose:
while not self.queue.empty():
self.queue.get_nowait()
self.queue.put("stop")
ljm.eStreamStop(self.handle)
def prepare_for_exit(handle, stop_stream=True):
if stop_stream:
print("\nStopping Stream")
try:
ljm.eStreamStop(handle)
except ljm.LJMError as exception:
if exception.errorString != "STREAM_NOT_RUNNING":
raise
ljm.close(handle)
def StreamStop(self):
if self.__streaming:
self.__streaming = False
ljm.eStreamStop(self.handle)
self.__stream_completion = self.__stream_callback(
self.handle, None)
else:
self.__stream_completion = False
return self.__stream_completion
def prepare_for_exit(handle, stop_stream=True):
if stop_stream:
print("\nStopping Stream")
try:
ljm.eStreamStop(handle)
except ljm.LJMError as exception:
if exception.errorString != "STREAM_NOT_RUNNING":
raise
ljm.close(handle)
def prepare_stream(self):
try:
''' Stop streaming if currently running '''
ljm.eStreamStop(self.handle)
except:
pass
self.aScanList = []
aNames = [
'STREAM_SETTLING_US', 'STREAM_RESOLUTION_INDEX',
'STREAM_CLOCK_SOURCE'
]
aValues = [0, 0, 0]
self._write_array(aNames, aValues)
def stream_out(self, channels, data, scanRate, loop=0):
''' Streams data at a given scan rate.
Args:
channels (list): Output channels to stream on, e.g. ['DAC0', 'DAC1']
data (array): Data to stream out. For streaming on multiple channels, use column 0 for DAC0 and column 1 for DAC1.
scanRate (float): desired output rate in scans/s
loop (int): number of values from the end of the buffer to loop after finishing stream
'''
try:
''' Stop streaming if currently running '''
ljm.eStreamStop(self.handle)
except:
pass
n = np.ceil(np.log10(2 * (1 + len(data))) / np.log10(2))
buffer_size = 2**n
for i in range(len(channels)):
aNames = [
"STREAM_OUT%i_TARGET" % i,
"STREAM_OUT%i_BUFFER_SIZE" % i,
"STREAM_OUT%i_ENABLE" % i
]
ch = channels[i]
if ch == 'FIO_STATE':
target = 2500
else:
target = 1000 + 2 * ch
aValues = [target, buffer_size, 1]
self._write_array(aNames, aValues)
if ch == 'FIO_STATE':
target = ['STREAM_OUT%i_BUFFER_U16' % i] * len(data)
else:
target = ['STREAM_OUT%i_BUFFER_F32' % i] * len(data)
try:
target_array = data[:, i]
except IndexError:
target_array = data
ljm.eWriteNames(self.handle, len(target_array), target,
list(target_array))
aNames = [
"STREAM_OUT%i_LOOP_SIZE" % i,
"STREAM_OUT%i_SET_LOOP" % i
]
aValues = [loop * len(data), 1]
self._write_array(aNames, aValues)
self.aScanList.append(4800 + i)
scanRate = ljm.eStreamStart(self.handle, 1, len(self.aScanList),
self.aScanList, scanRate)
def __exit__(self, *exc):
try:
eStreamStop(self.handle)
except ljm.LJMError as exception:
if exception.errorString != "STREAM_NOT_RUNNING":
raise
if (self.running_ramp) and (self.ramp_thread != None):
self.ramp_thread.stop()
if (self.hv1 != 0) or (self.hv2 != 0):
self.SetHV1(0)
self.SetHV2(0)
time.sleep(5)
self.SetPolarity("POS", "NEG")
self.HV1Enable(False)
self.HV2Enable(False)
ljm.close(self.handle)
def stream_data(q, ljm_devices):
print("Reading thread has started.")
try:
# ljm.eWriteAddress(ljm_device, 1000, ljm.constants.FLOAT32, 2.5)
remaining_data = {}
while True:
#for _ in range(NUM_READS):
for device_id in ljm_devices:
print("Reading from {0}...".format(device_id))
results = ljm.eStreamRead(ljm_devices[device_id])
read_time = str(datetime.now())
reading = {
"id": str(uuid4()),
"rpi_mac": get_device_mac(),
"device_id": device_id,
"read_time": read_time,
"data": results[0]
}
remaining_data[device_id] = results[1]
q.put(reading)
for device_id in ljm_devices:
if (remaining_data.get(device_id, 0) > 0):
print("Reading from {0}...".format(device_id))
results = ljm.eStreamRead(ljm_devices[device_id])
read_time = str(datetime.now())
reading = {
"id": str(uuid4()),
"rpi_mac": get_device_mac(),
"device_id": device_id,
"read_time": read_time,
"data": results[0]
}
q.put(reading)
ljm.eStreamStop(ljm_devices[device_id])
except ljm.LJMError as ljmerr:
print("Error occurred while streaming. Quiting streaming program.")
print(ljmerr)
finally:
for device_id in ljm_devices:
ljm.close(ljm_devices[device_id])
global is_reading
is_reading = False
def offset_calibration(handle, precision=2):
'''With a linear sweep of every possible tension, the program finds the maximum voltage read'''
linear = np.arange(2.5, 5, 2.5 / ((4 * 127) + 1))
initialise_streamout(handle, linear, 4)
ljm.eStreamStart(handle, (4 * 127), 2, [4800, 0], 150)
data = np.empty(4 * 127)
for x in range(precision):
read = ljm.eStreamRead(handle)
data = np.append(data, read[0][0:4 * 127])
ljm.eStreamStop(handle)
slope = ((2.5 * np.linspace(4 * 127, 2 * 4 * 127, 4 * 127)) / (4 * 127))
data = np.convolve(data, signal.gaussian(4 * 127, 10),
'same')[(4 * 127) - 1:(2 * 4 * 127) - 1]
peakind = np.array(
signal.argrelmax(
np.array([x if x > 0.99 * data.max() else 0 for x in data])))
if peakind.mean() < len(slope):
maxVoltage = slope[peakind.mean()]
print('Maximum found for {0}'.format(maxVoltage))
else:
print('No maxima found, 3.75 will be the offset')
maxVoltage = 3.75
return maxVoltage
def stop(self):
''' Stop streaming if currently running '''
try:
ljm.eStreamStop(self.labjack.handle)
except:
pass
def generador_Frecuecia(f1, f2, f3, f4, nombre):
fs = 20000
# f = 500
ciclo1 = f1 / 400.0000000
ciclo1 = np.ceil(ciclo1)
ciclo2 = f2 / 400.0000000
ciclo2 = np.ceil(ciclo2)
duration1 = np.float32(ciclo1 / f1)
duration2 = np.float32(ciclo2 / f2)
samples1 = (np.sin(2 * np.pi * np.arange(fs * duration1) * f1 /
fs)).astype(np.float32)
samples1 = 2.0 * samples1 + 2.5
samples2 = (np.sin(2 * np.pi * np.arange(fs * duration2) * f2 /
fs)).astype(np.float32)
samples2 = 2.0 * samples2 + 2.5
#plt.plot(samples)
#plt.show()
# print(len(samples1))
# MAX_REQUESTS = 1000 # The number of eStreamRead calls that will be performed.
# Open first found LabJack
# handle = ljm.openS("ANY", "ANY", "ANY")
info = ljm.getHandleInfo(handle)
print("Opened a LabJack with Device type: %i, Connection type: %i,\n" \
"Serial number: %i, IP address: %s, Port: %i,\nMax bytes per MB: %i" % \
(info[0], info[1], info[2], ljm.numberToIP(info[3]), info[4], info[5]))
# Desactivacion de parlantes
t0 = time.time()
ljm.eWriteName(handle, "FIO1", 0)
ljm.eWriteName(handle, "FIO4", 0)
ljm.eWriteName(handle, "FIO2", 0)
ljm.eWriteName(handle, "FIO0", 0)
t1 = time.time()
TDes_parlantes = t0 - t1
# Setup Stream Out
OUT_NAMES = ["DAC0", "DAC1"]
NUM_OUT_CHANNELS = len(OUT_NAMES)
outAddress1 = ljm.nameToAddress(OUT_NAMES[0])[0]
outAddress2 = ljm.nameToAddress(OUT_NAMES[0])[1]
# Allocate memory for the stream-out buffer
t0 = time.time()
ljm.eWriteName(handle, "STREAM_OUT0_TARGET", 1000)
ljm.eWriteName(handle, "STREAM_OUT0_BUFFER_SIZE", 2048)
ljm.eWriteName(handle, "STREAM_OUT0_ENABLE", 1)
ljm.eWriteName(handle, "STREAM_OUT0_LOOP_SIZE", len(samples1))
ljm.eWriteName(handle, "STREAM_OUT1_TARGET", 1002)
ljm.eWriteName(handle, "STREAM_OUT1_BUFFER_SIZE", 2048)
ljm.eWriteName(handle, "STREAM_OUT1_ENABLE", 1)
ljm.eWriteName(handle, "STREAM_OUT1_LOOP_SIZE", len(samples2))
freq1 = 80000000.000000000000000000 / 32
freq1 = freq1 / f3
ljm.eWriteName(handle, "DIO_EF_CLOCK1_ENABLE", 0)
ljm.eWriteName(handle, "DIO_EF_CLOCK1_DIVISOR", 32)
ljm.eWriteName(handle, "DIO_EF_CLOCK1_ROLL_VALUE", freq1)
ljm.eWriteName(handle, "DIO_EF_CLOCK1_ENABLE", 1)
ljm.eWriteName(handle, "DIO3_EF_ENABLE", 0)
ljm.eWriteName(handle, "DIO3_EF_INDEX", 0)
ljm.eWriteName(handle, "DIO3_EF_OPTIONS", 1)
ljm.eWriteName(handle, "DIO3_EF_CONFIG_A", freq1 / 2)
ljm.eWriteName(handle, "DIO3_EF_ENABLE", 1)
ljm.eWriteName(handle, "DIO_EF_CLOCK1_DIVISOR", 32)
ljm.eWriteName(handle, "DIO_EF_CLOCK1_ROLL_VALUE", freq1)
ljm.eWriteName(handle, "DIO3_EF_CONFIG_A", freq1 / 2)
freq2 = 80000000.000000000000000000 / 32
freq2 = freq2 / f4
ljm.eWriteName(handle, "DIO_EF_CLOCK2_ENABLE", 0)
ljm.eWriteName(handle, "DIO_EF_CLOCK2_DIVISOR", 32)
ljm.eWriteName(handle, "DIO_EF_CLOCK2_ROLL_VALUE", freq2)
ljm.eWriteName(handle, "DIO_EF_CLOCK2_ENABLE", 1)
ljm.eWriteName(handle, "DIO5_EF_ENABLE", 0)
ljm.eWriteName(handle, "DIO5_EF_INDEX", 0)
ljm.eWriteName(handle, "DIO5_EF_OPTIONS", 2)
ljm.eWriteName(handle, "DIO5_EF_CONFIG_A", freq2 / 2)
ljm.eWriteName(handle, "DIO5_EF_ENABLE", 1)
ljm.eWriteName(handle, "DIO_EF_CLOCK2_DIVISOR", 32)
ljm.eWriteName(handle, "DIO_EF_CLOCK2_ROLL_VALUE", freq2)
ljm.eWriteName(handle, "DIO5_EF_CONFIG_A", freq2 / 2)
for i in range(0, len(samples1)):
ljm.eWriteName(handle, "STREAM_OUT0_BUFFER_F32", samples1[i])
for i in range(0, len(samples2)):
ljm.eWriteName(handle, "STREAM_OUT1_BUFFER_F32", samples2[i])
t1 = time.time()
Tallocatememory = t0 - t1
tm.sleep(1)
ljm.eWriteName(handle, "STREAM_OUT0_SET_LOOP", 1)
ljm.eWriteName(handle, "STREAM_OUT1_SET_LOOP", 1)
print("STREAM_OUT0_BUFFER_STATUS = %f" %
(ljm.eReadName(handle, "STREAM_OUT0_BUFFER_STATUS")))
print("STREAM_OUT0_BUFFER_STATUS = %f" %
(ljm.eReadName(handle, "STREAM_OUT1_BUFFER_STATUS")))
# Stream Configuration
aScanListNames = ["AIN2"] # Scan list names to stream
numAddresses = len(aScanListNames)
aScanList = ljm.namesToAddresses(numAddresses, aScanListNames)[0]
scanRate = fs
scansPerRead = int(scanRate / 1000)
# Datos de Transformada de FFT
T = 1.00000 / fs
x = np.linspace(0.00, scansPerRead * T, scansPerRead)
xf = np.linspace(0.00, 1.00 / (2.00 * T), scansPerRead / 2)
# fig, (ax, bx) = plt.subplots(2, 1)
# plt.ion()
# Add the scan list outputs to the end of the scan list.
# STREAM_OUT0 = 4800, STREAM_OUT1 = 4801, etc.
aScanList.extend([4800]) # STREAM_OUT0
# If we had more STREAM_OUTs
aScanList.extend([4801]) # STREAM_OUT1
# aScanList.extend([4802]) # STREAM_OUT2
# aScanList.extend([4803]) # STREAM_OUT3
try:
# Configure the analog inputs' negative channel, range, settling time and
# resolution.
# Note when streaming, negative channels and ranges can be configured for
# individual analog inputs, but the stream has only one settling time and
# resolution.
aNames = [
"AIN2_NEGATIVE_CH", "AIN_ALL_RANGE", "STREAM_SETTLING_US",
"STREAM_RESOLUTION_INDEX"
]
aValues = [3, 10.0, 0, 0] # single-ended, +/-10V, 0 (default),
# 0 (default)
ljm.eWriteNames(handle, len(aNames), aNames, aValues)
i = 1
j = 0
print("Empieza")
t0 = time.time()
scanRate = ljm.eStreamStart(handle, scansPerRead, 3, aScanList,
scanRate)
while j < 1:
i = 1
k = 0
h = 0
print(j)
while (k < 1000):
k = k + 1
ret = ljm.eStreamRead(handle)
# str=tm.time()
seleccionador(j)
# end=tm.time()
while i: # i <= M9A;X_REQUESTS:
# for g in range(0,2):
ret = ljm.eStreamRead(handle)
data = ret[0][0:scansPerRead]
# print("Hola")
# start2 = datetime.now()
yf = ft.fft(data)
yf = 2.0 / scansPerRead * np.abs(yf[:scansPerRead // 2])
# print("Hola2")
#(peaks, indexes) = octave.findpeaks(yf, 'DoubleSided', 'MinPeakHeight', 0.04, 'MinPeakDistance', 100, 'MinPeakWidth', 0)
# indexes = find_peaks_cwt(yf, np.arange(1, 2))
indexes = peakutils.indexes(yf,
thres=0.01 / max(yf),
min_dist=100)
print(indexes)
i = silenciador(j, indexes)
h = h + 1
# end2 = datetime()
# end = datetime.now
# plt.close()
# print("\nTotal scans = %i" % (totScans))
# tt = (end - start).seconds + float((end - start).microseconds) / 1000000
tt = h * 0.001
# tt2= end-str
print("Tiempo 1000Hz = %f seconds" % (tt))
# print("Tiempo 500Hz = %f seconds" % (tt2))
ANS[j] = (tt - OFFSET) * MULTIPLICITY
j = j + 1
# print("LJM Scan Rate = %f scans/second" % (scanRate))
# print("Timed Scan Rate = %f scans/second" % (totScans / tt))
# print("Timed Sample Rate = %f samples/second" % (totScans * numAddresses / tt))
# print("Skipped scans = %0.0f" % (totSkip / numAddresses))
except ljm.LJMError:
ljme = sys.exc_info()[1]
print(ljme)
except Exception:
e = sys.exc_info()[1]
print(e)
t1 = time.time()
TstreamStart = t0 - t1
ljm.eWriteName(handle, "FIO1", 0)
ljm.eWriteName(handle, "FIO4", 0)
ljm.eWriteName(handle, "FIO2", 0)
ljm.eWriteName(handle, "FIO0", 0)
h = 1
for dato in ANS:
print("Distancia %i : %f" % (h, dato))
h = h + 1
print("\nStop Stream")
ljm.eStreamStop(handle)
# Close handle
ljm.close(handle)
print("Termino")
def __init__(self, time_offset, IP_address, sampling, channels):
self.hv1_enable = 0
self.hv2_enable = 0
self.hv1 = 0
self.hv2 = 0
self.polarity1 = "POS"
self.polarity2 = "NEG"
self.running_ramp = False
self.ramp_thread = None
self.handle = openS("T7", "ETHERNET", IP_address)
self.HV1Enable()
self.HV2Enable()
self.SetLJTickVoltage("TDAC0", 0)
self.SetLJTickVoltage("TDAC1", 0)
try:
eStreamStop(self.handle)
except ljm.LJMError as exception:
if exception.errorString != "STREAM_NOT_RUNNING":
raise
self.time_offset = time_offset
try:
self.verification_string = str(getHandleInfo(self.handle)[0])
except:
self.verification_string = "False"
# Ensure triggered stream is disabled.
eWriteName(self.handle, "STREAM_TRIGGER_INDEX", 0)
# Enabling internally-clocked stream.
eWriteName(self.handle, "STREAM_CLOCK_SOURCE", 0)
# Configure the analog input negative channels, ranges, stream settling
# times and stream resolution index.
aNames = [
"AIN_ALL_NEGATIVE_CH", "AIN_ALL_RANGE", "STREAM_SETTLING_US",
"STREAM_RESOLUTION_INDEX"
]
aValues = [constants.GND, 10.0, 0,
0] # single-ended, +/-10V, 0 (default), 0 (default)
eWriteNames(self.handle, len(aNames), aNames, aValues)
# start acquisition
self.active_channels = []
self.active_channel_names = []
for ch in [0, 1, 2, 3, 4, 5]:
if bool(int(channels[0][ch].get())):
self.active_channel_names.append(channels[1][ch].get())
self.active_channels.append("AIN{0}".format(ch))
self.num_addresses = len(self.active_channels)
self.scan_list = namesToAddresses(self.num_addresses,
self.active_channels)[0]
self.scans_rate = int(sampling["scans_rate"].get())
self.scans_per_read = int(sampling["scans_per_read"].get())
self.new_attributes = [
("column_names", ", ".join(self.active_channel_names)),
("units", ", ".join(["V"] * len(self.active_channels))),
("sampling", "{0} [S/s]".format(self.scans_rate))
]
# shape and type of the array of returned data
self.shape = (self.num_addresses, )
self.dtype = 'f'
self.scan_rate = eStreamStart(self.handle, self.scans_per_read,
self.num_addresses, self.scan_list,
self.scans_rate)
def stop_stream(self):
ljm.eStreamStop(self.handle)
def stop_stream(self): ljm.eStreamStop(self.handle)
def StreamCollection(max_requests=60, scanrate=1000, bKick=True, minSum=-1.0):
#time will take about max_requests/2 in seconds
MAX_REQUESTS = max_requests # The number of eStreamRead calls that will be performed.
FIRST_AIN_CHANNEL = 0 #AIN0
NUMBER_OF_AINS = 3 # AIN0: L-R, AIN1: Sum, AIN2: T-B
rawData = []
# open the all ports and get the labjack handle
handle = xyz.openPorts()
info = ljm.getHandleInfo(handle)
print("Opened a LabJack with Device type: %i, Connection type: %i,\n" \
"Serial number: %i, IP address: %s, Port: %i,\nMax bytes per MB: %i" % \
(info[0], info[1], info[2], ljm.numberToIP(info[3]), info[4], info[5]))
# Stream Configuration
aScanListNames = [
"AIN%i" % i
for i in range(FIRST_AIN_CHANNEL, FIRST_AIN_CHANNEL + NUMBER_OF_AINS)
] #Scan list names
print("\nScan List = " + " ".join(aScanListNames))
numAddresses = len(aScanListNames)
aScanList = ljm.namesToAddresses(numAddresses, aScanListNames)[0]
global scanRate
scanRate = scanrate
scansPerRead = int(scanRate / 2)
try:
# Configure the analog inputs' negative channel, range, settling time and
# resolution.
# Note when streaming, negative channels and ranges can be configured for
# individual analog inputs, but the stream has only one settling time and
# resolution.
aNames = [
"AIN_ALL_NEGATIVE_CH", "AIN_ALL_RANGE", "STREAM_SETTLING_US",
"STREAM_RESOLUTION_INDEX"
]
aValues = [ljm.constants.GND, 10.0, 0,
0] #single-ended, +/-10V, 0 (default),
#0 (default)
ljm.eWriteNames(handle, len(aNames), aNames, aValues)
eventNumber = 0 # keeps track of the event we make a new one each time the user resets the pendulum and hits enter
input('start?')
while True:
if bKick:
# kick the pendulum to drive it so we can take period data.
print('Kicking')
xr, yr, zr = kickUpAndWait(
0, 4.5e-6, 0,
10) # kick the field and save the current values.
#xr,yr,zr = kickUpAndWait(0, 2e-6, 0, 10) # seems like we maight want a bit less kick
# Configure and start stream
scanRate = ljm.eStreamStart(handle, scansPerRead, numAddresses,
aScanList, scanRate)
print("\nStream started with a scan rate of %0.0f Hz." % scanRate)
print("\nPerforming %i stream reads." % MAX_REQUESTS)
if bKick:
kickDown(xr, yr,
zr) # put the currents back to where they were
print('Done Kicking!')
# then do the stream.
start = datetime.now()
totScans = 0
totSkip = 0 # Total skipped samples
i = 1 # counter for number of stream requests
while i <= MAX_REQUESTS:
ret = ljm.eStreamRead(handle)
data = ret[0]
scans = len(data) / numAddresses
totScans += scans
# Count the skipped samples which are indicated by -9999 values. Missed
# samples occur after a device's stream buffer overflows and are
# reported after auto-recover mode ends.
curSkip = data.count(-9999.0)
totSkip += curSkip
print("\neStreamRead %i" % i)
ainStr = ""
for j in range(0, numAddresses):
ainStr += "%s = %0.5f " % (aScanListNames[j], data[j])
print(" 1st scan out of %i: %s" % (scans, ainStr))
print(" Scans Skipped = %0.0f, Scan Backlogs: Device = %i, LJM = " \
"%i" % (curSkip/numAddresses, ret[1], ret[2]))
newDataChunk = np.reshape(
data, (-1, NUMBER_OF_AINS)
) # reshape the data to have each row be a different reading
if i != 1: # if we are not on the first run.
rawData = np.vstack((rawData, newDataChunk))
else:
rawData = newDataChunk # this should only run on the first time.
#print('FIRST RUN THROUGH')
#print(rawData,'\n')
i += 1
end = datetime.now()
print("\nTotal scans = %i" % (totScans))
tt = (end - start).seconds + float(
(end - start).microseconds) / 1000000
print("Time taken = %f seconds" % (tt))
print("LJM Scan Rate = %f scans/second" % (scanRate))
print("Timed Scan Rate = %f scans/second" % (totScans / tt))
print("Timed Sample Rate = %f samples/second" %
(totScans * numAddresses / tt))
print("Skipped scans = %0.0f" % (totSkip / numAddresses))
print("\nStop Stream")
ljm.eStreamStop(handle)
print('current querry!')
# update the powersupply field readings so we can reference them later
xyz.xCoil.getLargeCoilField()
xyz.yCoil.getLargeCoilField()
print('done with current querry!')
# format data to include field values
rawDataWithFieldValues = []
print(rawData)
first = True
for j, row in enumerate(
rawData
): # setp throuh and append the field values to each datapoint
if row[1] >= minSum:
timestamp = j * (1.0 / scanRate)
rowWithFieldValues = np.append(
row,
np.array([
xyz.xCoil.largeCoilField, xyz.yCoil.largeCoilField,
timestamp, eventNumber
])) # for now we aren't using the adustment coils
if first:
first = False
rawDataWithFieldValues = rowWithFieldValues
else: # not on the first loop
rawDataWithFieldValues = np.vstack(
(rawDataWithFieldValues, rowWithFieldValues))
print(np.shape(rawDataWithFieldValues))
# and add it to our master data array
if eventNumber != 0:
#print(np.shape(allTheData))
#print('--------')
#print(np.shape(rawDataWithFieldValues))
allTheData = np.vstack((allTheData, rawDataWithFieldValues))
#print(np.shape(allTheData))
else:
allTheData = rawDataWithFieldValues
print(allTheData)
print(np.shape(allTheData))
input(
"finished with eventNumber %s. Press enter to start a new data run."
% eventNumber)
eventNumber += 1 # increment the event number
except ljm.LJMError:
ljme = sys.exc_info()[1]
print(ljme)
#xyz.closePorts(handle)
except KeyboardInterrupt: # usefull to have a KeyboardInterrupt when your're debugging
# save the data to a DataFrame
print("saving dataFrame")
dataFrame = package_my_data_into_a_dataframe_yay(allTheData)
#dataFrame.to_csv("./data/frequencyVsField/testData.csv")
# generate timestamp
timeStamp1 = time.strftime('%y-%m-%d~%H-%M-%S')
dataFrame.to_csv("./data/Calibrations/freqVsField%s.csv" % timeStamp1)
xyz.closePorts(handle)
except Exception as e:
# helpful to close the ports on except when debugging the code.
# it prevents the devices from thinking they are still conected and refusing the new connecton
# on the next open ports call.
print("saving dataFrame")
dataFrame = package_my_data_into_a_dataframe_yay(allTheData)
#dataFrame.to_csv("./data/frequencyVsField/testData.csv")
# generate timestamp
timeStamp1 = time.strftime('%y-%m-%d~%H-%M-%S')
dataFrame.to_csv("./data/Calibrations/freqVsField%s.csv" % timeStamp1)
xyz.closePorts(handle)
print('closed all the ports\n')
print(e) # print the exception
raise
for k in range(0, NUM_IN_CHANNELS):
ainStr += "%s: %0.5f, " % (POS_IN_NAMES[k], data[j * NUM_IN_CHANNELS + k])
print(" %s" % (ainStr))
print(
" Scans Skipped = %0.0f, Scan Backlogs: Device = %i, LJM = "
"%i" % (curSkip / NUM_IN_CHANNELS, ret[1], ret[2])
)
i += 1
end = datetime.now()
print("\nTotal scans = %i" % (totScans))
tt = (end - start).seconds + float((end - start).microseconds) / 1000000
print("Time taken = %f seconds" % (tt))
print("LJM Scan Rate = %f scans/second" % (scanRate))
print("Timed Scan Rate = %f scans/second" % (totScans / tt))
print("Timed Sample Rate = %f samples/second" % (totScans * NUM_IN_CHANNELS / tt))
print("Skipped scans = %0.0f" % (totSkip / NUM_IN_CHANNELS))
except ljm.LJMError:
ljme = sys.exc_info()[1]
print(ljme)
except Exception:
e = sys.exc_info()[1]
print(e)
print("\nStop Stream")
ljm.eStreamStop(handle)
# Close handle
ljm.close(handle)
def start_acq(self, session, params=None):
"""
Task to start data acquisition.
Args:
sampling_frequency (float):
Sampling frequency for data collection. Defaults to 2.5 Hz
"""
if params is None:
params = {}
# Setup streaming parameters. Data is collected and published in
# blocks at 1 Hz or the scan rate, whichever is less.
scan_rate_input = params.get('sampling_frequency',
self.sampling_frequency)
scans_per_read = max(1, int(scan_rate_input))
num_chs = len(self.chs)
ch_addrs = ljm.namesToAddresses(num_chs, self.chs)[0]
with self.lock.acquire_timeout(0, job='acq') as acquired:
if not acquired:
self.log.warn("Could not start acq because "
"{} is already running".format(self.lock.job))
return False, "Could not acquire lock."
session.set_status('running')
self.take_data = True
# Start the data stream. Use the scan rate returned by the stream,
# which should be the same as the input scan rate.
try:
scan_rate = ljm.eStreamStart(self.handle, scans_per_read,
num_chs, ch_addrs,
scan_rate_input)
except LJMError as e: # in case the stream is running
self.log.error(e)
self.log.error("Stopping previous stream and starting new one")
ljm.eStreamStop(self.handle)
scan_rate = ljm.eStreamStart(self.handle, scans_per_read,
num_chs, ch_addrs,
scan_rate_input)
self.log.info(
f"\nStream started with a scan rate of {scan_rate} Hz.")
cur_time = time.time()
while self.take_data:
data = {'block_name': 'sens', 'data': {}}
# Query the labjack
raw_output = ljm.eStreamRead(self.handle)
output = raw_output[0]
# Data comes in form ['AIN0_1', 'AIN1_1', 'AIN0_2', ...]
for i, ch in enumerate(self.chs):
ch_output = output[i::num_chs]
data['data'][ch + 'V'] = ch_output
# Apply unit conversion function for this channel
if ch in self.functions.keys():
new_ch_output, units = \
self.ljf.unit_conversion(np.array(ch_output),
self.functions[ch])
data['data'][ch + units] = list(new_ch_output)
# The labjack outputs at exactly the scan rate but doesn't
# generate timestamps. So create them here.
timestamps = [
cur_time + i / scan_rate for i in range(scans_per_read)
]
cur_time += scans_per_read / scan_rate
data['timestamps'] = timestamps
self.agent.publish_to_feed('sensors', data)
# Publish to the downsampled data feed only the first
# timestamp and data point for each channel.
data_downsampled = {
'block_name': 'sens',
'data': {},
'timestamp': timestamps[0]
}
for key, value in data['data'].items():
data_downsampled['data'][key] = value[0]
self.agent.publish_to_feed('sensors_downsampled',
data_downsampled)
session.data = data_downsampled
# Flush buffer and stop the data stream
self.agent.feeds['sensors'].flush_buffer()
self.agent.feeds['sensors_downsampled'].flush_buffer()
ljm.eStreamStop(self.handle)
self.log.info("Data stream stopped")
return True, 'Acquisition exited cleanly.'
def stream_to_file(handle,
samples_per_point,
points_per_write,
sampling_rate,
address_names,
fname_preamble,
temp_scale=50,
voltage_offset=0.):
def signal_handler(signal, frame):
global stop_scan
stop_scan = True
print("Stopping scan (KeyboardInterrupt)")
signal.signal(signal.SIGINT, signal_handler)
mean_vector = np.zeros(samples_per_point)
write_buffer = np.zeros((points_per_write, 2))
num_addresses = len(address_names)
aScanList = ljm.namesToAddresses(num_addresses, address_names)[0]
start = 0
tot_scans = 0
tot_skip = 0
total_points = 0
try:
ljm.eWriteName(handle, "STREAM_TRIGGER_INDEX", 0)
ljm.eWriteName(handle, "STREAM_CLOCK_SOURCE", 0)
scanRate = ljm.eStreamStart(handle, sampling_rate, num_addresses,
aScanList, sampling_rate)
print(f"Stream started with {sampling_rate:.1f} Hz sampling rate")
start = datetime.now()
means = 0
points = 0
stop_scan = False
while not stop_scan:
ret = ljm.eStreamRead(handle)
aData = ret[0]
tot_scans += len(aData)
mean_vector[means] = np.mean(aData)
# Count the skipped samples which are indicated by -9999 values.
# Missed samples occur after a device's stream buffer overflows and
# are reported after auto-recover mode ends.
cur_skip = aData.count(-9999.0)
tot_skip += cur_skip
means += 1
if means == samples_per_point:
write_buffer[points, :] = [
time.time(),
volt_to_temp(np.mean(mean_vector), 50., 0.)
]
points += 1
means = 0
mean_vector = np.zeros(samples_per_point)
if points == points_per_write:
fname = fname_from_time(fname_preamble)
print(f"writing to file {fname}")
append_to_file(fname, write_buffer)
points = 0
write_buffer = np.zeros((points_per_write, 2))
total_points += points_per_write
except ljm.LJMError:
print(sys.exc_info()[1])
except Exception:
print(sys.exc_info()[1])
finally:
fname = fname_from_time(fname_preamble)
print(f"writing to file {fname}")
append_to_file(fname, write_buffer[np.nonzero(write_buffer[:, 1])])
total_points += len(np.nonzero(write_buffer))
end = datetime.now()
print("\nTotal scans = %i" % (tot_scans))
print("\nTotal points saved = %i" % (total_points))
tt = (end - start).seconds + float((end - start).microseconds) / 1e6
print("Time taken = %f seconds" % (tt))
print("LJM Scan Rate = %f scans/second" % (scanRate))
print("Timed Scan Rate = %f scans/second" % (tot_scans / tt))
print("Timed Sample Rate = %f samples/second" %
(tot_scans * num_addresses / tt))
print("Skipped scans = %0.0f" % (tot_skip / num_addresses))
try:
print("Stopping stream.")
ljm.eStreamStop(handle)
except ljm.LJMError:
print(sys.exc_info()[1])
except Exception:
print(sys.exc_info()[1])
return {
'Total scans': tot_scans,
'Saved points': total_points,
'Scan time': tt,
'LJM scan rate': scanRate,
'Timed scan rate': tot_scans / tt,
'Timed sample rate': tot_scans * num_addresses / tt,
'Skipped scans': tot_skip / num_addresses
}
raise err
end = datetime.now()
print("\nTotal scans = %i" % (totScans))
tt = (end - start).seconds + float((end - start).microseconds) / 1000000
print("Time taken = %f seconds" % (tt))
print("LJM Scan Rate = %f scans/second" % (scanRate))
print("Timed Scan Rate = %f scans/second" % (totScans / tt))
print("Timed Sample Rate = %f samples/second" % (totScans * numAddresses / tt))
print("Skipped scans = %0.0f" % (totSkip / numAddresses))
except ljm.LJMError:
ljme = sys.exc_info()[1]
print(ljme)
except Exception:
e = sys.exc_info()[1]
print(e)
try:
print("\nStop Stream")
ljm.eStreamStop(handle)
except ljm.LJMError:
ljme = sys.exc_info()[1]
print(ljme)
except Exception:
e = sys.exc_info()[1]
print(e)
# Close handle
ljm.close(handle)
def main():
try:
openTime = datetime.utcnow()
daqHandle = ljm.openS("T7", "TCP", "ANY")
daqInfo = ljm.getHandleInfo(daqHandle)
print(
"Opened a LabJack with Device type: %i, Connection type: %i,\n"
"Serial number: %i, IP address: %s, Port: %i,\nMax bytes per MB: %i"
% (daqInfo[0], daqInfo[1], daqInfo[2], ljm.numberToIP(
daqInfo[3]), daqInfo[4], daqInfo[5]))
csvWriter, csvFile = generateCSV()
timeHeader = ["TIME"]
timeHeader.extend(aScanListNames)
csvWriter.writerow(timeHeader)
if (daqInfo[0] == ljm.constants.dtT7):
# Disable triggered streaming
ljm.eWriteName(daqHandle, "STREAM_TRIGGER_INDEX", 0)
# Enabling internally-clocked stream.
ljm.eWriteName(daqHandle, "STREAM_CLOCK_SOURCE", 0)
# All negative channels are single-ended, AIN0 and AIN1 ranges are
# +/-10 V, stream settling is 0 (default) and stream resolution index
# is 0 (default).
aNames = [
"AIN_ALL_NEGATIVE_CH", "AIN_ALL_RANGE", "STREAM_SETTLING_US",
"STREAM_RESOLUTION_INDEX"
]
aValues = [ljm.constants.GND, 10.0, 0, 0]
ljm.eWriteNames(daqHandle, len(aNames), aNames, aValues)
# Configure and start stream
scanStartTime = datetime_to_float(datetime.utcnow())
lastScanStartTime = scanStartTime
scanRate = ljm.eStreamStart(daqHandle, scansPerRead, numAddresses,
aScanList, scanRate)
print("\nStream started with a scan rate of %0.0f Hz." % scanRate)
totScans = 0
totSkip = 0 # Total skipped samples
aScanClockNames = ["SYSTEM_TIMER_20HZ", "CORE_TIMER"]
startClocks = ljm.eReadNames(daqHandle, len(aScanClockNames),
aScanClockNames)
start20HzClock = startClocks[0]
start40MHzClock = startClocks[1]
count40MHzRollover = 0
# Stream Configuration
aScanListNames = ["AIN0", "AIN1", "AIN2",
"AIN3"] # Scan list names to stream
aScanList = ljm.namesToAddresses(len(numAddresses),
aScanListNames)[0]
scanRate = 10
scansPerRead = int(scanRate / 2)
# while True:
try:
ret = ljm.eStreamRead(daqHandle)
scanStopTime = datetime_to_float(datetime.utcnow())
aData = ret[0]
scans = len(aData) / numAddresses
totScans += scans
# Count the skipped samples which are indicated by -9999 values. Missed
# samples occur after a device's stream buffer overflows and are
# reported after auto-recover mode ends.
curSkip = aData.count(-9999.0)
totSkip += curSkip
ainStr = ""
for j in range(0, numAddresses):
ainStr += "%s = %0.5f, " % (aScanListNames[j], aData[j])
print(" 1st scan out of %i: %s" % (scans, ainStr))
print(
" Scans Skipped = %0.0f, Scan Backlogs: Device = %i, LJM = "
"%i" % (curSkip / numAddresses, ret[1], ret[2]))
timeData = np.linspace(scanStartTime,
scanStopTime,
num=scansPerRead)
print timeData
print aData
scanData = np.array(aData)
print scanData
print("Rows/Cols: ", scanData.shape)
print("Num address: ", numAddresses)
splitScanData = np.split(scanData, scansPerRead)
print splitScanData
print("Rows/Cols: ", splitScanData[0].shape)
csvWriter.writerows(splitScanData)
verticalStackedSplitScanData = np.vstack(splitScanData)
print verticalStackedSplitScanData
print "Test"
# csvWriter.writerows(verticalStackedSplitScanData) #use write rows once separated with numpy array
except Exception as e:
raise e
# break
except KeyboardInterrupt: # Extend to save button interrupt
pass
# break
# Close T7 Connection
try:
print("\nStop Stream")
ljm.eStreamStop(daqHandle)
except ljm.LJMError:
ljme = sys.exc_info()[1]
print(ljme)
except Exception:
e = sys.exc_info()[1]
print(e)
except ljm.LJMError:
ljme = sys.exc_info()[1]
print(ljme)
except Exception:
e = sys.exc_info()[1]
print(e)
csvFile.close()
ljm.close(daqHandle)