def __init__(self):
logging.basicConfig(format='%(asctime)s %(levelname)-8s %(message)s',
level=logging.INFO,
datefmt='%Y-%m-%d %H:%M:%S')
logging.info("started logging")
threading.Thread.__init__(self)
self.sensor_object = TempSensorAdaptorTask(20)
self.sensor_object.start() # Starting Threaded Class Object
class TempSensorAdaptor:
#Default Constructor
def __init__(self):
self.sreader = TempSensorAdaptorTask()
#Fetch current readings from the sensor
def getSensorData(self):
self.sreader.run()
return True
def setUp(self):
#instantiate the classes required
self.sensorDataManager = SensorDataManager()
self.tempActuatorAdaptor = TempActuatorAdaptor()
self.tempSensorAdaptor = TempSensorAdaptor()
self.tempSensorAdaptorTask = TempSensorAdaptorTask()
pass
def __init__(self): #constructor of TempSensorAdaptor
temp=TempSensorAdaptorTask("Thread") #object of class TempSensorAdaptorTask is created
'''
Starting the thread
'''
temp.start()
sleep(1)
# temp.generateTemp()
def setUp(self):
self.sd = SensorData()
self.sd.addValue(11)
self.sdm = SensorDataManager()
self.actuator = ActuatorData()
self.actuator.setCommand("Raise Temp")
self.sdm.threshold = 20
self.tsa = TempSensorAdaptor()
self.taa = TempActuatorAdaptor()
self.tat = TempSensorAdaptorTask()
self.shla = SenseHatLedActivator()
pass
def setUp(self):
self.config = ConfigUtil()
self.config.loadConfig('../../../config/ConnectedDevicesConfig.props')
self.tempsensor = TempSensorAdaptorTask()
self.sensordata = SensorData()
self.actuatordata = ActuatorData()
self.sensordata.addValue(10)
self.sensordata.addValue(15)
self.sensordata.addValue(20)
self.sensordata.addValue(25)
self.sensordata.setName('Temperature')
self.actuatordata.setCommand('Increasing')
self.actuatordata.setName('SenseHat')
self.sdmanager = SensorDataManager()
class TempSensorAdaptor(threading.Thread):
def __init__(self):
logging.basicConfig(format='%(asctime)s %(levelname)-8s %(message)s',
level=logging.INFO,
datefmt='%Y-%m-%d %H:%M:%S')
logging.info("started logging")
threading.Thread.__init__(self)
self.sensor_object = TempSensorAdaptorTask(20)
self.sensor_object.start() # Starting Threaded Class Object
'''
Standard getter function to return the instance of TempSensorAdaptor
'''
def getSensorobj(self):
return self.sensor_object
def setUp(self):
#self.adaptor= TempSensorAdaptorTask.getteravg()
self.datamanager_avg = SensorDataManager().getteravg()
self.datamanager_current = SensorDataManager().gettercurrent()
self.datamanager_count = SensorDataManager().gettercount()
self.adaptorTask_sensor = TempSensorAdaptorTask()
self.sensorAdaptor = TempSensorAdaptor()
class TempSensorAdaptor(object):
'''
classdocs
'''
#initialize TempSensorAdaptorTask
tempSensorAdaptorTask = TempSensorAdaptorTask()
def __init__(self):
'''
Constructor
'''
#method for creating and running the thread
def run(self):
#log the initial message
logging.info("Starting getTemperature thread()")
#try the running thread
try:
#enable the temperature fetcher
self.tempSensorAdaptorTask.enableFetcher = True
#create the thread that calls the getTemperature() method of the tempSensorAdaptorTask
threadTempSensorAdaptor = threading.Thread(target = self.tempSensorAdaptorTask.getTemperature())
#set the temp sensor adaptor daemon to true (enable main thread to exit when done)
threadTempSensorAdaptor.daemon = True
#if found error
except:
#return false
return False
#return true for running successfully
return True
def __init__(self): #constructor of TempSensorAdaptor
'''
Starting the threads for all the three classes of sensors
'''
while True:
temp = TempSensorAdaptorTask(
"Temp Sensor"
) #object of class TempSensorAdaptorTask is created
humidity1 = HumiditySensorAdaptorTask(
"Humidity sensor"
) #object of class HumiditySensorAdaptorTask is created
humidity2 = HI2CSensorAdaptorTask(
"I2C Sensor"
) #object of class HI2CSensorAdaptorTask is created
temp.start() #Thread is started
temp.join() #Thread is put on wait until it finishes
humidity1.start() #Thread is started
humidity1.join() #Thread is put on wait until it finishes
humidity2.start() #Thread is started
humidity2.join() #Thread is put on wait until it finishes
def adaptor(self):
result = TempSensorAdaptorTask()
result.run()
class Module03Test(unittest.TestCase):
"""
Use this to setup your tests. This is where you may want to load configuration
information (if needed), initialize class-scoped variables, create class-scoped
instances of complex objects, initialize any requisite connections, etc.
"""
#initialize the rgb values for the led colors
#no color
e = [0, 0, 0]
#red
r = [255, 0, 0]
#blue
b = [0, 0, 255]
#initialize the red arrow when increasing the temperature on sense hat led matrix
arrowRedInc = [
e, e, e, r, r, e, e, e, e, e, r, r, r, r, e, e, e, r, e, r, r, e, r, e,
r, e, e, r, r, e, e, r, e, e, e, r, r, e, e, e, e, e, e, r, r, e, e, e,
e, e, e, r, r, e, e, e, e, e, e, r, r, e, e, e
]
#initialize the blue arrow when decreasing the temperature on sense hat led matrix
arrowBlueDec = [
e, e, e, b, b, e, e, e, e, e, e, b, b, e, e, e, e, e, e, b, b, e, e, e,
e, e, e, b, b, e, e, e, b, e, e, b, b, e, e, b, e, b, e, b, b, e, b, e,
e, e, b, b, b, b, e, e, e, e, e, b, b, e, e, e
]
def setUp(self):
#instantiate the classes required
self.sensorDataManager = SensorDataManager()
self.tempActuatorAdaptor = TempActuatorAdaptor()
self.tempSensorAdaptor = TempSensorAdaptor()
self.tempSensorAdaptorTask = TempSensorAdaptorTask()
pass
"""
Use this to tear down any allocated resources after your tests are complete. This
is where you may want to release connections, zero out any long-term data, etc.
"""
def tearDown(self):
#set the reference to the variables as none to release the resources they're holding
self.sensorDataManager = None
self.tempActuatorAdaptor = None
self.tempSensorAdaptor = None
self.tempSensorAdaptorTask = None
pass
"""
This method tests the handleSensorData() of SensorDataManager module. It tests whether the sensor data passed to the method triggers the correct
actuator command.
"""
def testGetHandleSensorData(self):
#initialize sensor data
sensorData = SensorData()
#when current value is greater than nominal temp
sensorData.addValue(90)
#get the actuatorData returned from the sensor data manager
actuatorData = self.sensorDataManager.handleSensorData(sensorData)
#check if actuatorData is of type ActuatorData
self.assertIsInstance(actuatorData, ActuatorData)
#test the value, which should be "arrowBlueDec"
self.assertEqual(self.arrowBlueDec, actuatorData.getValue())
#actuatorData command should be decrease temp
self.assertEqual(actuatorData.getCommand(), "DECREASE TEMP")
#when current value is less than nominal temp
sensorData.addValue(10)
#get the actuatorData returned from the sensor data manager
actuatorData = self.sensorDataManager.handleSensorData(sensorData)
#check if actuatorData is of type ActuatorData
self.assertIsInstance(actuatorData, ActuatorData)
#actuatorData command should be increase temp
self.assertEqual(actuatorData.getCommand(), "INCREASE TEMP")
#when current value is equal to the nominal temp
sensorData.addValue(20)
#get the actuatorData returned from the sensor data manager
actuatorData = self.sensorDataManager.handleSensorData(sensorData)
#actuatorData is none sensor data equal to nominal temp
self.assertEqual(actuatorData, None)
pass
"""
This tests the sendNotification() method of the SensorDataManager, it simply whether
the notification is being sent or not. This has been shown in documentation using screenshot of the
email
"""
def testSendNotification(self):
#if the config file is loaded: while testing on system
if self.sensorDataManager.smtpClientConnector.config.configFileLoaded == True:
#returns true, notification is being sent
self.assertEqual(
True,
self.sensorDataManager.sendNotification(
"Hello", "This is a test"))
pass
"""
This tests the updateActuator() method of the TempActuatorAdaptor, it checks whether the actuator is updated
(by returning an actuatorData reference) when the trigger is valid (INCREASE TEMP) and when the trigger is invalid
(NOT A VALID TRIGGER)
"""
def testUpdateActuator(self):
#create an invalid actuator trigger
actuatorData = ActuatorData()
actuatorData.setCommand("NOT A VALID TRIGGER")
#add a valid value
actuatorData.setValue(self.arrowBlueDec)
#updateActuator should return a false
self.assertEqual(False,
self.tempActuatorAdaptor.updateActuator(actuatorData))
#create a valid actuator trigger
actuatorData = ActuatorData()
actuatorData.setCommand("INCREASE TEMP")
actuatorData.setValue(self.arrowRedInc)
#updateActuator should return a True
self.assertEqual(True,
self.tempActuatorAdaptor.updateActuator(actuatorData))
#sending a none should throw an exception, where when caught, returns a false
self.assertEqual(False, self.tempActuatorAdaptor.updateActuator(None))
pass
"""
This tests the getTemperature() method of the TempSensorAdaptorTask, it checks whether the fetcher runs when enabled,
disabled, number of readings to get has been set to 0.
"""
def testGetTemperature(self):
#enable the fetcher
self.tempSensorAdaptorTask.enableFetcher = True
#change numReadings to a small finite value to check
self.tempSensorAdaptorTask.numReadings = 1
#change sleep time (rateInSec) to a small amount
self.tempSensorAdaptorTask.rateInSec = 1
#run when numReadings > 0 and adaptor is enabled
self.assertEqual(True, self.tempSensorAdaptorTask.getTemperature())
#change numReadings to 0
self.tempSensorAdaptorTask.numReadings = 0
#run when numReadings = 0 and emulator is enabled, should return false because generator didn't run
self.assertEqual(False, self.tempSensorAdaptorTask.getTemperature())
#disable the emulator
self.tempSensorAdaptorTask.enableFetcher = False
#change readings to > 0
self.tempSensorAdaptorTask.numReadings = 1
#run when numReadings > 0 and emulator is disabled, should return false because generator didn't run
self.assertEqual(False, self.tempSensorAdaptorTask.getTemperature())
"""
This tests the run() method of the TempSensorAdaptor, it checks whether it runs successfully.
"""
def testTempSensorAdaptor(self):
#get the reference to the tempSensorEmulatorTask
tempSensTask = self.tempSensorAdaptor.tempSensorAdaptorTask
#change numReadings to a small finite value to check
tempSensTask.numReadings = 1
#change sleep time (rateInSec) to a small amount
tempSensTask.rateInSec = 1
#enable the tempEmulatorTask's emulator
tempSensTask.enableFetcher = True
#run the run function of tempEmulatorAdaptor and get the value of success of the adaptor
self.assertEqual(True, self.tempSensorAdaptor.run())
class Module03Test(unittest.TestCase):
"""
Use this to setup your tests. This is where you may want to load configuration
information (if needed), initialize class-scoped variables, create class-scoped
instances of complex objects, initialize any requisite connections, etc.
"""
def setUp(self):
self.config = ConfigUtil()
self.config.loadConfig('../../../config/ConnectedDevicesConfig.props')
self.tempsensor = TempSensorAdaptorTask()
self.sensordata = SensorData()
self.actuatordata = ActuatorData()
self.sensordata.addValue(10)
self.sensordata.addValue(15)
self.sensordata.addValue(20)
self.sensordata.addValue(25)
self.sensordata.setName('Temperature')
self.actuatordata.setCommand('Increasing')
self.actuatordata.setName('SenseHat')
self.sdmanager = SensorDataManager()
"""
Use this to tear down any allocated resources after your tests are complete. This
is where you may want to release connections, zero out any long-term data, etc.
"""
def tearDown(self):
pass
"""
Place your comments describing the test here.
"""
def testloadConfig(self):
self.assertTrue(
self.config.loadConfig(
'../../../config/ConnectedDevicesConfig.props'))
def testhasConfigData(self):
self.assertTrue(self.config.hasConfigData())
def testgetValue(self):
self.assertEqual(self.config.getValue("smtp.cloud", "port"), '465')
def testgetSensorData(self):
assert self.tempsensor.getTemperature(
) > 0 and self.tempsensor.getTemperature() < 30
def testgetAverageValue(self):
assert self.sensordata.getAverageValue(
) > 0 and self.sensordata.getAverageValue() < 30
def testgetCount(self):
self.assertEqual(self.sensordata.getCount(), 4)
def testgetCurrentValue(self):
assert self.sensordata.getCurrentValue(
) > 0 and self.sensordata.getCurrentValue() < 30
def testMinValue(self):
assert self.sensordata.getMinValue(
) >= 0 and self.sensordata.getMinValue() < 30
def testMaxValue(self):
assert self.sensordata.getMaxValue(
) > 0 and self.sensordata.getMaxValue() < 30
def testName(self):
self.assertEqual(self.sensordata.getName(), 'Temperature')
def testgetCommand(self):
self.assertEqual(self.actuatordata.getCommand(), 'Increasing')
def testName2(self):
self.assertEqual(self.actuatordata.getName(), 'SenseHat')
def testhandleSenseData(self):
assert self.sdmanager.handleSensorData(self.sensordata) is not None
class Module03Test(unittest.TestCase):
"""
Use this to setup your tests. This is where you may want to load configuration
information (if needed), initialize class-scoped variables, create class-scoped
instances of complex objects, initialize any requisite connections, etc.
"""
def setUp(self):
self.sd = SensorData()
self.sd.addValue(11)
self.sdm = SensorDataManager()
self.actuator = ActuatorData()
self.actuator.setCommand("Raise Temp")
self.sdm.threshold = 20
self.tsa = TempSensorAdaptor()
self.taa = TempActuatorAdaptor()
self.tat = TempSensorAdaptorTask()
self.shla = SenseHatLedActivator()
pass
"""
Use this to tear down any allocated resources after your tests are complete. This
is where you may want to release connections, zero out any long-term data, etc.
"""
def tearDown(self):
pass
"""
Place your comments describing the test here.
"""
'@Test'
def testSendNotification(self):
self.assertTrue(self.sdm.sendNotification(),
"Notification Unsucessful")
pass
'@Test'
def testhadleSensorData(self):
self.assertTrue(self.sdm.hadleSensorData(self.sd),
"Sensor handle data method not working")
'@Test'
def testgetSensorData(self):
self.assertTrue(self.tsa.getSensorData(),
"Issue in temperature adaptor")
'@Test'
def testreadSensorValueMin(self):
self.assertGreaterEqual(self.tat.readSensorValue(), 0.0,
'sensor value coming less than 0')
'@Test'
def testreadSensorValueMax(self):
self.assertGreaterEqual(100, self.tat.readSensorValue(),
'sensor value coming more than 100')
'@Test'
def testupdateActuator(self):
self.assertTrue(self.taa.updateActuator(self.actuator),
"Actuator update failed")
'@Test'
def testupdateLed(self):
self.assertTrue(self.shla.updateLed("Test Message"),
"Led update failed")
'''
Created on Feb 5, 2020
@author: sk199
'''
import logging
from time import sleep
from labs.module03.TempSensorAdaptorTask import TempSensorAdaptorTask
#logging.getLogger().setLevel(logging.DEBUG)
#logger = logging.getLogger(__name__)
logging.basicConfig(format='%(asctime)s:%(levelname)s:%(message)s',
level=logging.DEBUG)
logging.info("Starting temperature sensor adaptor daemon thread...")
tempsensoradaptor = TempSensorAdaptorTask()
tempsensoradaptor.daemon = True
tempsensoradaptor.enableEmulator = True
tempsensoradaptor.start()
while (True):
sleep(10)
pass
def __init__(self):
self.sreader = TempSensorAdaptorTask()