Beispiel #1
0
def create_flavor(vim_cache, res_cache, data, flavor, do_notify, res_type):
    location_info = flavor["properties"]["location_info"]
    local_storages = ignore_case_get(data, "local_storages")
    param = {
        "name": "Flavor_%s" % flavor["vdu_id"],
        "vcpu": int(flavor["nfv_compute"]["num_cpus"]),
        "memory": int(flavor["nfv_compute"]["mem_size"].replace('GB',
                                                                '').strip()),
        "isPublic": True
    }
    for local_storage_id in ignore_case_get(flavor, "local_storages"):
        for local_storage in local_storages:
            if local_storage_id != local_storage["local_storage_id"]:
                continue
            disk_type = local_storage["properties"]["disk_type"]
            disk_size = int(local_storage["properties"]["size"].replace(
                'GB', '').strip())
            if disk_type == "root":
                param["disk"] = disk_size
            elif disk_type == "ephemeral":
                param["ephemeral"] = disk_size
            elif disk_type == "swap":
                param["swap"] = disk_size
    flavor_extra_specs = ignore_case_get(flavor["nfv_compute"],
                                         "flavor_extra_specs")
    extra_specs = []
    for es in flavor_extra_specs:
        extra_specs.append({"keyName": es, "value": flavor_extra_specs[es]})
    set_opt_val(param, "extraSpecs", extra_specs)
    vim_id, tenant_name = location_info["vimid"], location_info["tenant"]
    tenant_id = get_tenant_id(vim_cache, vim_id, tenant_name)
    ret = api.create_flavor(vim_id, tenant_id, param)
    do_notify(res_type, ret)
    set_res_cache(res_cache, res_type, flavor["vdu_id"], ret["id"])
Beispiel #2
0
def create_port(vim_cache, res_cache, data, port, do_notify, res_type):
    location_info = None
    port_ref_vdu_id = ignore_case_get(port, "vdu_id")
    for vdu in ignore_case_get(data, "vdus"):
        if vdu["vdu_id"] == port_ref_vdu_id:
            location_info = vdu["properties"]["location_info"]
            if port["cp_id"] not in vdu["cps"]:
                vdu["cps"].append(port["cp_id"])
            break
    if not location_info:
        err_msg = "vdu_id(%s) for cp(%s) is not defined"
        raise VimException(err_msg % (port_ref_vdu_id, port["cp_id"]),
                           ERR_CODE)
    network_id = ignore_case_get(port, "networkId")
    subnet_id = ignore_case_get(port, "subnetId")
    if not network_id:
        network_id = get_res_id(res_cache, RES_NETWORK, port["vl_id"])
        subnet_id = get_res_id(res_cache, RES_SUBNET, port["vl_id"])
    param = {
        "networkId": network_id,
        "name": port["properties"].get("name", "undefined")
    }
    set_opt_val(param, "subnetId", subnet_id)
    set_opt_val(param, "macAddress",
                ignore_case_get(port["properties"], "mac_address"))
    set_opt_val(param, "ip", ignore_case_get(port["properties"], "ip_address"))
    set_opt_val(param, "vnicType",
                ignore_case_get(port["properties"], "vnic_type"))
    set_opt_val(param, "securityGroups", "")  # TODO
    vim_id, tenant_name = location_info["vimid"], location_info["tenant"]
    tenant_id = get_tenant_id(vim_cache, vim_id, tenant_name)
    ret = api.create_port(vim_id, tenant_id, param)
    ret["nodeId"] = port["cp_id"]
    do_notify(res_type, ret)
    set_res_cache(res_cache, res_type, port["cp_id"], ret["id"])
Beispiel #3
0
def create_volume(vim_cache, res_cache, vol, do_notify, res_type):
    location_info = vol["properties"]["location_info"]
    param = {
        "name":
        vol["properties"]["volume_name"] if vol["properties"].get(
            "volume_name", None) else vol["volume_storage_id"],
        "volumeSize":
        int(
            ignore_case_get(vol["properties"], "size_of_storage",
                            "0").replace('GB', '').replace('"', '').strip())
    }
    set_opt_val(param, "imageName", ignore_case_get(vol, "image_file"))
    set_opt_val(param, "volumeType",
                ignore_case_get(vol["properties"], "type_of_storage"))
    set_opt_val(param, "availabilityZone",
                ignore_case_get(location_info, "availability_zone"))
    vim_id, tenant_name = location_info["vimid"], location_info["tenant"]
    tenant_id = get_tenant_id(vim_cache, vim_id, tenant_name)
    ret = api.create_volume(vim_id, tenant_id, param)
    ret["nodeId"] = vol["volume_storage_id"]
    do_notify(res_type, ret)
    vol_id, vol_name = ret["id"], ret["name"]
    set_res_cache(res_cache, res_type, vol["volume_storage_id"], vol_id)
    retry_count, max_retry_count = 0, 300
    while retry_count < max_retry_count:
        vol_info = api.get_volume(vim_id, tenant_id, vol_id)
        if vol_info["status"].upper() == "AVAILABLE":
            logger.debug("Volume(%s) is available", vol_id)
            return
        time.sleep(2)
        retry_count = retry_count + 1
    raise VimException("Failed to create Volume(%s): Timeout." % vol_name,
                       ERR_CODE)
Beispiel #4
0
def create_network(vim_cache, res_cache, network, do_notify, res_type):
    location_info = network["properties"]["location_info"]
    param = {
        "name":
        network["properties"]["network_name"],
        "shared":
        False,
        "networkType":
        network["properties"]["network_type"],
        "physicalNetwork":
        ignore_case_get(network["properties"], "physical_network")
    }
    set_opt_val(param, "vlanTransparent",
                ignore_case_get(network["properties"], "vlan_transparent"))
    set_opt_val(
        param, "segmentationId",
        int(ignore_case_get(network["properties"], "segmentation_id", "0")))
    set_opt_val(param, "routerExternal",
                ignore_case_get(network, "route_external"))
    vim_id, tenant_name = location_info["vimid"], location_info["tenant"]
    tenant_id = get_tenant_id(vim_cache, vim_id, tenant_name)
    ret = api.create_network(vim_id, tenant_id, param)
    ret["nodeId"] = network["vl_id"]
    do_notify(res_type, ret)
    set_res_cache(res_cache, res_type, network["vl_id"], ret["id"])
Beispiel #5
0
def create_vm(vim_cache, res_cache, data, vm, do_notify, res_type):
    location_info = vm["properties"]["location_info"]
    vim_id, tenant_name = location_info["vimid"], location_info["tenant"]
    tenant_id = get_tenant_id(vim_cache, vim_id, tenant_name)
    param = {
        "name": vm["properties"].get("name", "undefined"),
        "flavorId": get_res_id(res_cache, RES_FLAVOR, vm["vdu_id"]),
        "boot": {},
        "nicArray": [],
        "contextArray": [],
        "volumeArray": []
    }
    # set boot param
    if "artifacts" in vm and vm["artifacts"]:
        param["boot"]["type"] = BOOT_FROM_IMAGE
        img_name = ""
        for artifact in vm["artifacts"]:
            if artifact["artifact_name"] == "sw_image":
                # TODO: after DM define
                img_name = os.path.basename(artifact["file"])
                break
        if not img_name:
            raise VimException("Undefined image(%s)" % vm["artifacts"],
                               ERR_CODE)
        images = api.list_image(vim_id, tenant_id)
        for image in images["images"]:
            if img_name == image["name"]:
                param["boot"]["imageId"] = image["id"]
                break
        if "imageId" not in param["boot"]:
            raise VimException(
                "Undefined artifacts image(%s)" % vm["artifacts"], ERR_CODE)
    elif vm["virtual_storages"]:
        param["boot"]["type"] = BOOT_FROM_VOLUME
        vol_id = vm["virtual_storages"][0]["virtual_storage_id"]
        param["boot"]["volumeId"] = get_res_id(res_cache, RES_VOLUME, vol_id)
    else:
        raise VimException("No image and volume defined", ERR_CODE)

    for cp_id in ignore_case_get(vm, "cps"):
        param["nicArray"].append(
            {"portId": get_res_id(res_cache, RES_PORT, cp_id)})
    param["contextArray"] = ignore_case_get(vm["properties"], "inject_files",
                                            [])
    logger.debug("contextArray:%s", param["contextArray"])
    for vol_data in ignore_case_get(vm, "volume_storages"):
        vol_id = vol_data["volume_storage_id"]
        param["volumeArray"].append(
            {"volumeId": get_res_id(res_cache, RES_VOLUME, vol_id)})

    user_data = base64.b64encode(
        bytes(ignore_case_get(vm["properties"], "user_data"),
              "utf-8")).decode("utf-8")
    set_opt_val(param, "availabilityZone",
                ignore_case_get(location_info, "availability_zone"))
    set_opt_val(param, "userdata", user_data)
    set_opt_val(param, "metadata",
                ignore_case_get(vm["properties"], "meta_data"))
    set_opt_val(param, "securityGroups",
                "")  # TODO List of names of security group
    set_opt_val(param, "serverGroup",
                "")  # TODO the ServerGroup for anti-affinity and affinity

    ret = api.create_vm(vim_id, tenant_id, param)
    ret["ports"] = [nic.get("portId") for nic in param["nicArray"]]
    ret["vimId"] = vim_id
    ret["tenantId"] = tenant_id
    do_notify(res_type, ret)
    vm_id = ret["id"]
    if ignore_case_get(ret, "name"):
        vm_name = vm["properties"].get("name", "undefined")
        logger.debug("vm_name:%s" % vm_name)
    opt_vm_status = "Timeout"
    retry_count, max_retry_count = 0, 100
    while retry_count < max_retry_count:
        vm_info = api.get_vm(vim_id, tenant_id, vm_id)
        if vm_info["status"].upper() == "ACTIVE":
            logger.debug("Vm(%s) is active", vm_id)
            return
        if vm_info["status"].upper() == "ERROR":
            opt_vm_status = vm_info["status"]
            break
        time.sleep(2)
        retry_count = retry_count + 1
    raise VimException(
        "Failed to create Vm(%s): %s." % (vm_name, opt_vm_status), ERR_CODE)
Beispiel #6
0
def create_port(vim_cache, res_cache, data, port, do_notify, res_type):
    location_info = None
    port_ref_vdu_id = ignore_case_get(port, "vdu_id")
    for vdu in ignore_case_get(data, "vdus"):
        if vdu["vdu_id"] == port_ref_vdu_id:
            location_info = vdu["properties"]["location_info"]
            if port["cp_id"] not in vdu["cps"]:
                vdu["cps"].append(port["cp_id"])
            break
    if not location_info:
        err_msg = "vdu_id(%s) for cp(%s) is not defined."
        raise VimException(err_msg % (port_ref_vdu_id, port["cp_id"]),
                           ERR_CODE)
    network_id = ignore_case_get(port, "networkId")
    subnet_id = ignore_case_get(port, "subnetId")

    if not network_id:
        if port["vl_id"] == "":
            return
        network_id = get_res_id(res_cache, RES_NETWORK, port["vl_id"])
        subnet_id = get_res_id(res_cache, RES_SUBNET, port["vl_id"])
    param = {"networkId": network_id, "name": port["cp_id"]}
    set_opt_val(param, "subnetId", subnet_id)
    set_opt_val(param, "macAddress",
                ignore_case_get(port["properties"], "mac_address"))
    ip_address = []
    logger.debug("port['properties']:%s" % port["properties"])
    for one_protocol_data in port["properties"]["protocol_data"]:
        l3_address_data = one_protocol_data["address_data"][
            "l3_address_data"]  # l3 is not 13
        fixed_ip_address = ignore_case_get(l3_address_data, "fixed_ip_address")
        ip_address.extend(fixed_ip_address)
    for one_virtual_network_interface in port["properties"].get(
            "virtual_network_interface_requirements", []):
        network_interface_requirements = one_virtual_network_interface[
            "network_interface_requirements"]
        interfaceTypeString = ignore_case_get(network_interface_requirements,
                                              "interfaceType")
        interfaceType = ""
        if interfaceTypeString != "":
            interfaceType = json.loads(
                interfaceTypeString)["configurationValue"]
        vnic_type = ignore_case_get(port["properties"], "vnic_type")
        if vnic_type == "":
            if interfaceType == "SR-IOV":
                set_opt_val(param, "vnicType", "direct")
        else:
            set_opt_val(param, "vnicType", vnic_type)

    set_opt_val(param, "ip", ",".join(ip_address))
    set_opt_val(param, "securityGroups", "")  # TODO
    vim_id, tenant_name = location_info["vimid"], location_info["tenant"]
    tenant_id = get_tenant_id(vim_cache, vim_id, tenant_name)
    ret = api.create_port(vim_id, tenant_id, param)
    ret["nodeId"] = port["cp_id"]
    do_notify(res_type, ret)
    set_res_cache(res_cache, res_type, port["cp_id"], ret["id"])
Beispiel #7
0
def create_subnet(vim_cache, res_cache, subnet, do_notify, res_type):
    location_info = subnet["properties"]["location_info"]
    network_id = get_res_id(res_cache, RES_NETWORK, subnet["vl_id"])
    vl_profile = subnet["properties"]["vl_profile"]
    layer_protocol = ignore_case_get(subnet["properties"]["connectivity_type"],
                                     "layer_protocol")
    param = {
        "networkId":
        network_id,
        "name":
        vl_profile["networkName"] + "_subnet",
        "cidr":
        ignore_case_get(vl_profile, "cidr"),
        "ipVersion":
        IP_V4 if (layer_protocol == 'ipv4') else
        (IP_V6 if (layer_protocol == 'ipv6') else None)
    }
    set_opt_val(param, "enableDhcp", ignore_case_get(vl_profile,
                                                     "dhcpEnabled"))
    set_opt_val(param, "gatewayIp", ignore_case_get(vl_profile, "gatewayIp"))
    set_opt_val(param, "dnsNameservers",
                ignore_case_get(subnet["properties"], "dns_nameservers"))
    allocation_pool = {}
    set_opt_val(allocation_pool, "start",
                ignore_case_get(vl_profile, "startIp"))
    set_opt_val(allocation_pool, "end", ignore_case_get(vl_profile, "endIp"))
    if allocation_pool:
        param["allocationPools"] = [allocation_pool]
    set_opt_val(param, "hostRoutes",
                ignore_case_get(subnet["properties"], "host_routes"))
    vim_id, tenant_name = location_info["vimid"], location_info["tenant"]
    tenant_id = get_tenant_id(vim_cache, vim_id, tenant_name)
    ret = api.create_subnet(vim_id, tenant_id, param)
    do_notify(res_type, ret)
    set_res_cache(res_cache, res_type, subnet["vl_id"], ret["id"])
Beispiel #8
0
def create_vm(vim_cache, res_cache, data, vm, do_notify, res_type):
    location_info = vm["properties"]["location_info"]
    vim_id, tenant_name = location_info["vimid"], location_info["tenant"]
    tenant_id = get_tenant_id(vim_cache, vim_id, tenant_name)
    param = {
        "name": vm["properties"].get("name", "undefined"),
        "flavorId": get_res_id(res_cache, RES_FLAVOR, vm["vdu_id"]),
        "boot": {},
        "nicArray": [],
        "contextArray": [],
        "volumeArray": []
    }
    # set boot param
    if "image_file" in vm and vm["image_file"]:
        param["boot"]["type"] = BOOT_FROM_IMAGE
        img_name = ""
        for img in ignore_case_get(data, "image_files"):
            if vm["image_file"] == img["image_file_id"]:
                img_name = img["properties"]["name"]
                break
        if not img_name:
            raise VimException("Undefined image(%s)" % vm["image_file"],
                               ERR_CODE)
        images = api.list_image(vim_id, tenant_id)
        for image in images["images"]:
            if img_name == image["name"]:
                param["boot"]["imageId"] = image["id"]
                break
        if "imageId" not in param["boot"]:
            raise VimException(
                "Image(%s) not found in Vim(%s)" % (img_name, vim_id),
                ERR_CODE)
    elif vm["volume_storages"]:
        param["boot"]["type"] = BOOT_FROM_VOLUME
        vol_id = vm["volume_storages"][0]["volume_storage_id"]
        param["boot"]["volumeId"] = get_res_id(res_cache, RES_VOLUME, vol_id)
    else:
        raise VimException("No image and volume defined", ERR_CODE)

    for cp_id in ignore_case_get(vm, "cps"):
        param["nicArray"].append(
            {"portId": get_res_id(res_cache, RES_PORT, cp_id)})
    for inject_data in ignore_case_get(vm["properties"], "inject_data_list"):
        param["contextArray"].append({
            "fileName": inject_data["file_name"],
            "fileData": inject_data["file_data"]
        })
    for vol_data in ignore_case_get(vm, "volume_storages"):
        vol_id = vol_data["volume_storage_id"]
        param["volumeArray"].append(
            {"volumeId": get_res_id(res_cache, RES_VOLUME, vol_id)})

    set_opt_val(param, "availabilityZone",
                ignore_case_get(location_info, "availability_zone"))
    set_opt_val(
        param, "userdata",
        "")  # TODO Configuration information or scripts to use upon launch
    set_opt_val(param, "metadata",
                "")  # TODO [{"keyName": "foo", "value": "foo value"}]
    set_opt_val(param, "securityGroups",
                "")  # TODO List of names of security group
    set_opt_val(param, "serverGroup",
                "")  # TODO the ServerGroup for anti-affinity and affinity

    ret = api.create_vm(vim_id, tenant_id, param)
    do_notify(res_type, ret)
    #vm_id, vm_name, return_code = ret["id"], ret["name"], ret["returnCode"]
    vm_id, return_code = ret["id"], ret["returnCode"]
    if ignore_case_get(ret, "name"):
        vm_name = vm["properties"].get("name", "undefined")
        logger.debug("vm_name:%s" % vm_name)
    opt_vm_status = "Timeout"
    retry_count, max_retry_count = 0, 100
    while retry_count < max_retry_count:
        vm_info = api.get_vm(vim_id, tenant_id, vm_id)
        if vm_info["status"].upper() == "ACTIVE":
            logger.debug("Vm(%s) is active", vim_id)
            return
        if vm_info["status"].upper() == "ERROR":
            opt_vm_status = vm_info["status"]
            break
        time.sleep(2)
        retry_count = retry_count + 1
    raise VimException(
        "Failed to create Vm(%s): %s." % (vm_name, opt_vm_status), ERR_CODE)
Beispiel #9
0
def create_subnet(vim_cache, res_cache, subnet, do_notify, res_type):
    location_info = subnet["properties"]["location_info"]
    network_id = get_res_id(res_cache, RES_NETWORK, subnet["vl_id"])
    param = {
        "networkId": network_id,
        "name": subnet["properties"]["name"],
        "cidr": ignore_case_get(subnet["properties"], "cidr"),
        "ipVersion": ignore_case_get(subnet["properties"], "ip_version", IP_V4)
    }
    set_opt_val(param, "enableDhcp",
                ignore_case_get(subnet["properties"], "dhcp_enabled"))
    set_opt_val(param, "gatewayIp",
                ignore_case_get(subnet["properties"], "gateway_ip"))
    set_opt_val(param, "dnsNameservers",
                ignore_case_get(subnet["properties"], "dns_nameservers"))
    allocation_pool = {}
    set_opt_val(allocation_pool, "start",
                ignore_case_get(subnet["properties"], "start_ip"))
    set_opt_val(allocation_pool, "end",
                ignore_case_get(subnet["properties"], "end_ip"))
    if allocation_pool:
        param["allocationPools"] = [allocation_pool]
    set_opt_val(param, "hostRoutes",
                ignore_case_get(subnet["properties"], "host_routes"))
    vim_id, tenant_name = location_info["vimid"], location_info["tenant"]
    tenant_id = get_tenant_id(vim_cache, vim_id, tenant_name)
    ret = api.create_subnet(vim_id, tenant_id, param)
    do_notify(res_type, ret)
    set_res_cache(res_cache, res_type, subnet["vl_id"], ret["id"])