def calculo(self):
ind1 = self.Comp1.currentIndex()
ind2 = self.Comp2.currentIndex()
if ind1 != ind2:
zi = arange(0.025, 1., 0.025)
id1 = self.indices[ind1]
id2 = self.indices[ind2]
x = [0]
y = [0]
for z in zi:
try:
fraccion = [0.] * len(self.indices)
fraccion[ind1] = z
fraccion[ind2] = 1 - z
mez = Mezcla(tipo=3,
fraccionMolar=fraccion,
caudalMasico=1.)
tb = mez.componente[0].Tb
corr = Corriente(T=tb, P=101325., mezcla=mez)
T = corr.eos._Dew_T()
corr = Corriente(T=T, P=101325., mezcla=mez)
while corr.Liquido.fraccion[0] == corr.Gas.fraccion[
0] and corr.T < corr.mezcla.componente[1].Tb:
corr = Corriente(T=corr.T - 0.1, P=101325., mezcla=mez)
x.append(corr.Liquido.fraccion[0])
y.append(corr.Gas.fraccion[0])
except:
pass
x.append(1)
y.append(1)
self.rellenar(x, y)
def loadFromStream(self, stream, huella=True, run=True):
"""Read project from stream
huella: boolean to save project file to pychemqt_temporal"""
# read configuration
config = ConfigParser()
for i in range(stream.readInt32()):
section = stream.readString()
config.add_section(section)
for contador_option in range(stream.readInt32()):
option = stream.readString()
valor = stream.readString()
config.set(section, option, valor)
#TODO: Necesario para cargar los proyectos viejos
# config.set("Thermo", "freesteam", "False")
config.set("Units", "MolarSpecificHeat", "0")
self.setConfig(config)
if not huella:
os.rename(conf_dir+"pychemqtrc_temporal", conf_dir+"pychemqtrc_temporal_bak")
config.write(open(conf_dir+"pychemqtrc_temporal", "w"))
# read equipments
items = {}
contador_equipos = stream.readInt32()
for i in range(contador_equipos):
id = stream.readString()
if id[0] == "e":
equip = equipments[stream.readInt32()]()
equip.readFromStream(stream, run)
else:
equip = None
items[id] = equip
self.setItems(items)
# read streams
streams = {}
contador_streams = stream.readInt32()
for item in range(contador_streams):
id = stream.readInt32()
up = stream.readString()
down = stream.readString()
ind_up = stream.readInt32()
ind_down = stream.readInt32()
obj = Corriente()
obj.readFromStream(stream, run)
streams[id] = (up, down, ind_up, ind_down, obj)
if huella:
if down[0] == "e":
equip = self.items[down]
if isinstance(equip, Mixer):
kwargs = {"entrada": obj, "id_entrada": ind_down}
else:
kwargs = {equip.kwargsInput[ind_down]: obj}
equip(**kwargs)
self.setStreams(streams)
if not huella:
os.rename(conf_dir+"pychemqtrc_temporal_bak", conf_dir+"pychemqtrc_temporal")
def readFromJSON(self, data, huella=True):
"""Read project from stream
huella: boolean to save project file to pychemqt_temporal"""
# read configuration
config = ConfigParser()
for section, options in data["config"].items():
config.add_section(section)
for option, value in options.items():
config.set(section, option, value)
self.setConfig(config)
if not huella:
os.rename(conf_dir + "pychemqtrc_temporal",
conf_dir + "pychemqtrc_temporal_bak")
config.write(open(conf_dir + "pychemqtrc_temporal", "w"))
# read equipments
items = {}
for id, equip in data["equipment"].items():
if id[0] == "e":
index = equip["id"]
eq = equipments[index]()
eq.readFromJSON(equip)
else:
eq = None
items[id] = eq
self.setItems(items)
# read streams
streams = {}
for id, stream in data["stream"].items():
id = int(id)
up = stream["up"]
down = stream["down"]
ind_up = stream["ind_up"]
ind_down = stream["ind_down"]
obj = Corriente()
obj.readFromJSON(stream)
streams[id] = (up, down, ind_up, ind_down, obj)
if huella:
if down[0] == "e":
equip = self.items[down]
if isinstance(equip, Mixer):
kwargs = {"entrada": obj, "id_entrada": ind_down}
equip.cleanOldValues(**kwargs)
else:
kwargs = {equip.kwargsInput[ind_down]: obj}
equip.kwargs.update(kwargs)
if up[0] == "e":
equip = self.items[up]
# Equipment with variable output streams must be corrected
while len(equip.salida) <= ind_up:
equip.salida.append(None)
equip.salida[ind_up] = obj
self.setStreams(streams)
if not huella:
os.rename(conf_dir + "pychemqtrc_temporal_bak",
conf_dir + "pychemqtrc_temporal")
def readFromJSON(self, data, huella=True):
"""Read project from stream
huella: boolean to save project file to pychemqt_temporal"""
# read configuration
config = ConfigParser()
for section, options in data["config"].items():
config.add_section(section)
for option, value in options.items():
config.set(section, option, value)
self.setConfig(config)
if not huella:
os.rename(conf_dir+"pychemqtrc_temporal", conf_dir+"pychemqtrc_temporal_bak")
config.write(open(conf_dir+"pychemqtrc_temporal", "w"))
# read equipments
items = {}
for id, equip in data["equipment"].items():
if id[0] == "e":
index = equip["id"]
eq = equipments[index]()
eq.readFromJSON(equip)
else:
eq = None
items[id] = eq
self.setItems(items)
# read streams
streams = {}
for id, stream in data["stream"].items():
id = int(id)
up = stream["up"]
down = stream["down"]
ind_up = stream["ind_up"]
ind_down = stream["ind_down"]
obj = Corriente()
obj.readFromJSON(stream)
streams[id] = (up, down, ind_up, ind_down, obj)
if huella:
if down[0] == "e":
equip = self.items[down]
if isinstance(equip, Mixer):
kwargs = {"entrada": obj, "id_entrada": ind_down}
equip.cleanOldValues(**kwargs)
else:
kwargs = {equip.kwargsInput[ind_down]: obj}
equip.kwargs.update(kwargs)
if up[0] == "e":
equip = self.items[up]
# Equipment with variable output streams must be corrected
while len(equip.salida) <= ind_up:
equip.salida.append(None)
equip.salida[ind_up] = obj
self.setStreams(streams)
if not huella:
os.rename(conf_dir+"pychemqtrc_temporal_bak", conf_dir+"pychemqtrc_temporal")
def calculo(self):
self.entrada = self.kwargs["entrada"]
self.rendimientoCalculado = Dimensionless(self.kwargs["rendimiento"])
if self.kwargs["Pout"]:
DeltaP = Pressure(self.kwargs["Pout"] - self.entrada.P)
elif self.kwargs["deltaP"]:
DeltaP = Pressure(self.kwargs["deltaP"])
elif self.kwargs["Carga"]:
DeltaP = Pressure(self.kwargs["Carga"] * self.entrada.Liquido.rho *
g)
else:
DeltaP = Pressure(0)
if self.kwargs["usarCurva"]:
if self.kwargs["diametro"] != self.kwargs["curvaCaracteristica"][
0] or self.kwargs["velocidad"] != self.kwargs[
"curvaCaracteristica"][1]:
self.curvaActual = self.calcularCurvaActual()
else:
self.curvaActual = self.kwargs["curvaCaracteristica"]
self.Ajustar_Curvas_Caracteristicas()
if not self.kwargs["usarCurva"]:
head = Length(DeltaP / g / self.entrada.Liquido.rho)
power = Power(head * g * self.entrada.Liquido.rho *
self.entrada.Q / self.rendimientoCalculado)
P_freno = Power(power * self.rendimientoCalculado)
elif not self.kwargs["incognita"]:
head = Length(polyval(self.CurvaHQ, self.entrada.Q))
self.DeltaP = Pressure(head * g * self.entrada.Liquido.rho)
power = Power(self.entrada.Q * DeltaP)
P_freno = Power(polyval(self.CurvaPotQ, self.entrada.Q))
self.rendimientoCalculado = Dimensionless(power / P_freno)
else:
head = Length(self.DeltaP / g / self.entrada.Liquido.rho)
caudalvolumetrico = roots(
[self.CurvaHQ[0], self.CurvaHQ[1], self.CurvaHQ[2] - head])[0]
power = Power(caudalvolumetrico * self.DeltaP)
self.entrada = Corriente(
self.entrada.T, self.entrada.P.atm,
caudalvolumetrico * self.entrada.Liquido.rho * 3600,
self.entrada.mezcla, self.entrada.solido)
P_freno = Power(polyval(self.CurvaPotQ, caudalvolumetrico))
self.rendimientoCalculado = Dimensionless(power / P_freno)
self.headCalculada = head
self.power = power
self.P_freno = P_freno
self.salida = [self.entrada.clone(P=self.entrada.P + DeltaP)]
self.Pin = self.entrada.P
self.PoutCalculada = self.salida[0].P
self.Q = self.entrada.Q.galUSmin
self.volflow = self.entrada.Q
def calculo(self):
self.entrada = self.kwargs["entrada"]
Pout = self.kwargs["Pout"]
DeltaP = self.kwargs["DeltaP"]
Dew = self.kwargs["Dew"]
Bubble = self.kwargs["Bubble"]
if self.kwargs["off"] == 1:
if Pout:
self.Pout = unidades.Pressure(Pout)
elif DeltaP:
self.Pout = unidades.Pressure(self.entrada.P - DeltaP)
elif Dew:
corriente = self.entrada.clone(T=Dew)
self.Pout = corriente.eos._Dew_P()
elif Bubble:
corriente = self.entrada.clone(T=Bubble)
self.Pout = corriente.eos._Bubble_P()
self.salida = [self.entrada.clone(P=self.Pout)]
elif self.kwargs["off"] == 2:
self.entrada = Corriente()
self.salida = [self.entrada]
else:
self.salida = [self.entrada]
self.outT = self.salida[0].T
self.outP = self.salida[0].P
self.outX = self.salida[0].x
def f(T):
fracciones, h = self.reaccion.conversion(self.entrada, T)
corriente = Corriente(T, self.entrada.P.atm,
self.entrada.caudalmasico.kgh,
Mezcla(self.entrada.ids,
fracciones), self.entrada.solido)
return corriente.h - self.Q - self.entrada.h - h
def calculo(self):
"""Calculate procedure, only apply pressure loss method chosen"""
self.entrada = self.kwargs["entrada"]
Pout = self.kwargs["Pout"]
DeltaP = self.kwargs["DeltaP"]
Dew = self.kwargs["Dew"]
Bubble = self.kwargs["Bubble"]
if self.kwargs["off"] == 1:
if Pout:
self.Pout = unidades.Pressure(Pout)
elif DeltaP:
self.Pout = unidades.Pressure(self.entrada.P-DeltaP)
elif Dew:
corriente = self.entrada.clone(T=Dew)
self.Pout = corriente.eos._Dew_P()
elif Bubble:
corriente = self.entrada.clone(T=Bubble)
self.Pout = corriente.eos._Bubble_P()
self.salida = [self.entrada.clone(P=self.Pout)]
elif self.kwargs["off"] == 2:
self.entrada = Corriente()
self.salida = [self.entrada]
else:
self.salida = [self.entrada]
self.Pout = unidades.Pressure(self.salida[0].P)
# Calculate other properties
self.outT = self.salida[0].T
self.outX = self.salida[0].x
def calculo(self):
self.entrada = self.kwargs["entrada"]
self.criterio = self.kwargs["criterio"]
Pout = self.kwargs["Pout"]
if self.criterio == 2:
self.Pout = unidades.Pressure(Pout)
else:
lst = []
for entrada in self.entrada:
if entrada.status:
lst.append(entrada.P)
if self.criterio == 0:
self.Pout = unidades.Pressure(min(lst))
else:
self.Pout = unidades.Pressure(sum(lst, 0.0) / len(lst))
h_in = 0
To = 0
caudalunitariomasico = [0] * len(self.entrada[0].fraccion)
for entrada in self.entrada:
if entrada.status:
h_in += entrada.h
To += entrada.T * entrada.caudalmasico
for i, caudal in enumerate(entrada.caudalunitariomasico):
caudalunitariomasico[i] += caudal
To /= sum(caudalunitariomasico)
if self.entrada[0].Config.get("Components", "Solids"):
#TODO: Add solid mixer
pass
f = lambda T: Corriente(
T=T, P=self.Pout, caudalUnitarioMasico=caudalunitariomasico
).h - h_in
T = fsolve(f, To)[0]
salida = Corriente(T=T,
P=self.Pout,
caudalUnitarioMasico=caudalunitariomasico)
self.salida = [salida]
self.outT = salida.T
self.outP = salida.P
self.outX = salida.x
self.outMolarFlow = salida.caudalmolar
self.outMassFlow = salida.caudalmasico
self.outVolFlow = salida.Q
def cleanOldValues(self, **kwargs):
if kwargs.has_key("entrada"):
if isinstance(kwargs["entrada"], list):
kwargs["id_entrada"] = None
else:
corriente = kwargs["entrada"]
kwargs["entrada"] = self.kwargs["entrada"][:]
while len(kwargs["entrada"]) < kwargs["id_entrada"] + 1:
kwargs["entrada"].append(Corriente())
kwargs["entrada"][kwargs["id_entrada"]] = corriente
kwargs["id_entrada"] = None
self.kwargs.update(kwargs)
def calculo(self):
"""Calculate procedure, only a mass balance"""
self.entrada = self.kwargs["entrada"]
self.criterio = self.kwargs["criterio"]
# Define output pressure
if self.criterio == 2:
Pout = self.kwargs["Pout"]
else:
lst = []
for entrada in self.entrada:
if entrada.status:
lst.append(entrada.P)
if self.criterio == 0:
Pout = min(lst)
else:
Pout = sum(lst, 0.0) / len(lst)
self.Pout = unidades.Pressure(Pout)
# Heat balance for calculate output temperature
h_in = 0
To = 0
massUnitFlow = [0]*len(self.entrada[0].fraccion)
for entrada in self.entrada:
if entrada.status:
h_in += entrada.h
To += entrada.T*entrada.caudalmasico
for i, caudal in enumerate(entrada.caudalunitariomasico):
massUnitFlow[i] += caudal
To /= sum(massUnitFlow)
def f(T):
output = Corriente(T=T, P=self.Pout,
caudalUnitarioMasico=massUnitFlow)
return output.h-h_in
T = fsolve(f, To)[0]
# TODO: Add solid mixer capability
if self.entrada[0].solido:
pass
salida = Corriente(T=T, P=self.Pout, caudalUnitarioMasico=massUnitFlow)
self.salida = [salida]
# Calculate other properties
self.outT = salida.T
self.outX = salida.x
self.outMolarFlow = salida.caudalmolar
self.outMassFlow = salida.caudalmasico
self.outVolFlow = salida.Q
def calculo(self):
self.entrada = self.kwargs.get("entrada", None)
self.thermal = self.kwargs.get("thermal", 0)
#TODO: implementar para más de una reacción
self.reaccion = self.kwargs.get("reaccion", 0)[0]
# P=self.kwargs.get("P", 0)
# if P:
# self.entrada=Corriente(self.entrada.T, P, self.entrada.caudalmasico.kgh, self.entrada.mezcla, self.entrada.solido)
T = self.kwargs.get("T", 0)
if T:
self.T = unidades.Temperature(T)
else:
self.T = self.entrada.T
self.Q = unidades.Power(self.kwargs.get("Q", 0))
self.Text = self.kwargs.get("Text", 0)
self.U = unidades.HeatTransfCoef(self.kwargs.get("U", 0))
if self.thermal in [0, 2]:
def f(T):
fracciones, h = self.reaccion.conversion(self.entrada, T)
corriente = Corriente(T, self.entrada.P.atm,
self.entrada.caudalmasico.kgh,
Mezcla(self.entrada.ids,
fracciones), self.entrada.solido)
return corriente.h - self.Q - self.entrada.h - h
T = fsolve(f, self.entrada.T)
fracciones, h = self.reaccion.conversion(self.entrada, T)
elif self.thermal == 1:
T = self.T
fracciones, h = self.reaccion.conversion(self.entrada, T)
elif self.thermal == 3:
pass
print(fracciones)
self.Salida = Corriente(T=T,
P=self.entrada.P,
caudalMasico=self.entrada.caudalmasico,
fraccionMolar=fracciones,
solido=self.entrada.solido)
self.Heat = unidades.Power(self.Salida.h - self.entrada.h - h)
def cleanOldValues(self, **kwargs):
"""Clean incompatible kwargs parameters
New defined entrada delete old entrada
Entrada as list not need the id_entrada
"""
if "entrada" in kwargs:
if isinstance(kwargs["entrada"], list):
kwargs["id_entrada"] = None
else:
corriente = kwargs["entrada"]
kwargs["entrada"] = self.kwargs["entrada"][:]
while len(kwargs["entrada"]) < kwargs["id_entrada"]+1:
kwargs["entrada"].append(Corriente())
kwargs["entrada"][kwargs["id_entrada"]] = corriente
kwargs["id_entrada"] = None
self.kwargs.update(kwargs)
def addStream(self, id, up, down, obj=Corriente(), ind_up=0, ind_down=0):
if up[0] == "i":
obj = self.items[up]
stream = (up, down, ind_up, ind_down, obj)
if id not in list(self.streams.keys()):
self.streams[id] = stream
# self.graph.add_edge((up, down))
if down[0] == "e":
eq = self.items[down]
if isinstance(eq, Mixer):
kwargs = {"entrada": obj, "id_entrada": ind_down}
else:
kwargs = {eq.kwargsInput[ind_down]: obj}
eq(**kwargs)
def calculo(self):
self.entrada=self.kwargs["entrada"]
self.rendimientoCalculado=Dimensionless(self.kwargs["rendimiento"])
if self.kwargs["Pout"]:
DeltaP=Pressure(self.kwargs["Pout"]-self.entrada.P)
elif self.kwargs["deltaP"]:
DeltaP=Pressure(self.kwargs["deltaP"])
elif self.kwargs["Carga"]:
DeltaP=Pressure(self.kwargs["Carga"]*self.entrada.Liquido.rho*g)
else:
DeltaP=Pressure(0)
if self.kwargs["usarCurva"]:
if self.kwargs["diametro"]!=self.kwargs["curvaCaracteristica"][0] or self.kwargs["velocidad"]!=self.kwargs["curvaCaracteristica"][1]:
self.curvaActual=self.calcularCurvaActual()
else:
self.curvaActual=self.kwargs["curvaCaracteristica"]
self.Ajustar_Curvas_Caracteristicas()
if not self.kwargs["usarCurva"]:
head=Length(DeltaP/g/self.entrada.Liquido.rho)
power=Power(head*g*self.entrada.Liquido.rho*self.entrada.Q/self.rendimientoCalculado)
P_freno=Power(power*self.rendimientoCalculado)
elif not self.kwargs["incognita"]:
head=Length(polyval(self.CurvaHQ,self.entrada.Q))
self.DeltaP=Pressure(head*g*self.entrada.Liquido.rho)
power=Power(self.entrada.Q*DeltaP)
P_freno=Power(polyval(self.CurvaPotQ,self.entrada.Q))
self.rendimientoCalculado=Dimensionless(power/P_freno)
else:
head=Length(self.DeltaP/g/self.entrada.Liquido.rho)
caudalvolumetrico=roots([self.CurvaHQ[0], self.CurvaHQ[1], self.CurvaHQ[2]-head])[0]
power=Power(caudalvolumetrico*self.DeltaP)
self.entrada=Corriente(self.entrada.T, self.entrada.P.atm, caudalvolumetrico*self.entrada.Liquido.rho*3600, self.entrada.mezcla, self.entrada.solido)
P_freno=Power(polyval(self.CurvaPotQ,caudalvolumetrico))
self.rendimientoCalculado=Dimensionless(power/P_freno)
self.headCalculada=head
self.power=power
self.P_freno=P_freno
self.salida=[self.entrada.clone(P=self.entrada.P+DeltaP)]
self.Pin=self.entrada.P
self.PoutCalculada=self.salida[0].P
self.Q=self.entrada.Q.galUSmin
self.volflow=self.entrada.Q
def calculo(self):
if self.todos_datos():
self.rellenoSalida()
def rellenoSalida(self):
pass
def todos_datos(self):
pass
def calcularCostos(self):
if self.todos_datos():
if self.tipo.currentIndex()==0:
self.FireHeater.Coste(self.factorInstalacion.value(), 0, self.tipobox.currentIndex(), self.material.currentIndex())
else:
self.FireHeater.Coste(self.factorInstalacion.value(), 1, self.tipocilindrico.currentIndex(), self.material.currentIndex())
self.C_adq.setValue(self.FireHeater.C_adq.config())
self.C_inst.setValue(self.FireHeater.C_inst.config())
if __name__ == "__main__":
import sys
from lib.corriente import Corriente, Mezcla
app = QtWidgets.QApplication(sys.argv)
agua=Corriente(300, 1, 3600, Mezcla([62], [1]))
dialogo = UI_equipment(agua)
dialogo.show()
sys.exit(app.exec_())
def calculo(self):
self.entrada=self.kwargs["entrada"]
self.LKsplit=unidades.Dimensionless(self.kwargs["LKsplit"])
self.HKsplit=unidades.Dimensionless(self.kwargs["HKsplit"])
self.RCalculada=unidades.Dimensionless(self.kwargs["R"])
self.R_Rmin=unidades.Dimensionless(self.kwargs["R_Rmin"])
if self.kwargs["Pd"]:
self.Pd=unidades.Pressure(self.kwargs["Pd"])
else:
self.Pd=self.entrada.P
self.DeltaP=unidades.Pressure(self.kwargs["DeltaP"])
#Estimate splits of components
b=[]
d=[]
for i, caudal_i in enumerate(self.entrada.caudalunitariomolar):
if i==self.kwargs["LK"]:
b.append(caudal_i*(1-self.LKsplit))
d.append(caudal_i*self.LKsplit)
elif i==self.kwargs["HK"]:
d.append(caudal_i*(1-self.HKsplit))
b.append(caudal_i*self.HKsplit)
elif self.entrada.eos.Ki[i]>self.entrada.eos.Ki[self.kwargs["LK"]]:
b.append(0)
d.append(caudal_i)
elif self.entrada.eos.Ki[i]<self.entrada.eos.Ki[self.kwargs["HK"]]:
d.append(0)
b.append(caudal_i)
else:
d.append(caudal_i*0.5)
b.append(caudal_i*0.5)
while True:
bo=b
do=d
xt=[Q/sum(d) for Q in d]
xb=[Q/sum(b) for Q in b]
Qt=sum([di*comp.M for di, comp in zip(d, self.entrada.componente)])
Qb=sum([bi*comp.M for bi, comp in zip(b, self.entrada.componente)])
destilado=Corriente(T=self.entrada.T, P=self.Pd, caudalMasico=Qt, fraccionMolar=xt)
residuo=Corriente(T=self.entrada.T, P=self.Pd, caudalMasico=Qb, fraccionMolar=xb)
#TODO: Add algorithm to calculate Pd and condenser type fig 12.4 pag 230
#Fenske equation for Nmin
alfam=(destilado.eos.Ki[self.kwargs["LK"]]/destilado.eos.Ki[self.kwargs["HK"]]*residuo.eos.Ki[self.kwargs["LK"]]/residuo.eos.Ki[self.kwargs["HK"]])**0.5
Nmin=log10(destilado.caudalunitariomolar[self.kwargs["LK"]]/destilado.caudalunitariomolar[self.kwargs["HK"]] * residuo.caudalunitariomolar[self.kwargs["HK"]]/residuo.caudalunitariomolar[self.kwargs["LK"]]) / log10(alfam)
#Evaluación composición salidas
b=[]
d=[]
for i in range(len(self.entrada.ids)):
if i in [self.kwargs["LK"], self.kwargs["HK"]]:
b.append(bo[i])
d.append(do[i])
else:
alfa=(destilado.eos.Ki[i]/destilado.eos.Ki[self.kwargs["HK"]]*residuo.eos.Ki[i]/residuo.eos.Ki[self.kwargs["HK"]])**0.5
b.append(self.entrada.caudalunitariomolar[i]/(1+do[self.kwargs["HK"]]/bo[self.kwargs["HK"]]*alfa**Nmin))
d.append(self.entrada.caudalunitariomolar[i]*do[self.kwargs["HK"]]/bo[self.kwargs["HK"]]*alfa**Nmin/(1+do[self.kwargs["HK"]]/bo[self.kwargs["HK"]]*alfa**Nmin))
res=sum([abs(inicial-final) for inicial, final in zip(bo, b)]) + sum([abs(inicial-final) for inicial, final in zip(do, d)])
if res<1e-10:
self.Nmin=Nmin-self.kwargs["condenser"]+1
break
#Calculo de la razón de reflujo mínima, ecuación de Underwood
alfa=self.entrada.eos.Ki[self.kwargs["LK"]]/self.entrada.eos.Ki[self.kwargs["HK"]]
self.Rmin=unidades.Dimensionless(abs(float(destilado.caudalmolar/self.entrada.caudalmolar*(destilado.fraccion[self.kwargs["LK"]]/self.entrada.Liquido.fraccion[self.kwargs["LK"]]-alfa*destilado.fraccion[self.kwargs["HK"]]/self.entrada.Liquido.fraccion[self.kwargs["HK"]])/(alfa-1))))
#Cálculo del número de etapas reales, ecuación de Gilliland
if self.R_Rmin and not self.RCalculada:
self.RCalculada=unidades.Dimensionless(self.R_Rmin*self.Rmin)
X=(self.RCalculada-self.Rmin)/(self.RCalculada+1)
Y=1-exp((1+54.4*X)/(11+117.2*X)*(X-1)/X**0.5)
self.NTray=unidades.Dimensionless((Y+self.Nmin)/(1-Y)-1-self.kwargs["condenser"])
#Cálculo del piso de la alimentación
if self.kwargs["feed"]: #Ec. de Fenske
alfa_b=residuo.eos.Ki[self.kwargs["LK"]]/residuo.eos.Ki[self.kwargs["HK"]]
alfa_d=destilado.eos.Ki[self.kwargs["LK"]]/destilado.eos.Ki[self.kwargs["HK"]]
alfa_f=self.entrada.eos.Ki[self.kwargs["LK"]]/self.entrada.eos.Ki[self.kwargs["HK"]]
ratio=log(destilado.fraccion[self.kwargs["LK"]]/self.entrada.fraccion[self.kwargs["LK"]]*self.entrada.fraccion[self.kwargs["HK"]]/destilado.fraccion[self.kwargs["HK"]])/log(self.entrada.fraccion[self.kwargs["LK"]]/residuo.fraccion[self.kwargs["LK"]]*residuo.fraccion[self.kwargs["HK"]]/self.entrada.fraccion[self.kwargs["HK"]])*log((alfa_b*alfa_f)**0.5)/log((alfa_d*alfa_f)**0.5)
else: #Ec. de Kirkbride
ratio=(self.entrada.fraccion[self.kwargs["HK"]]/self.entrada.fraccion[self.kwargs["LK"]]*residuo.fraccion[self.kwargs["LK"]]**2/destilado.fraccion[self.kwargs["HK"]]**2*residuo.caudalmolar/destilado.caudalmolar)**0.206
self.Ns=self.NTray/(ratio+1)
self.Nr=self.NTray-self.Ns
self.N_feed=unidades.Dimensionless(self.Ns+1)
if self.kwargs["condenser"]: #Parcial
Tout=destilado.eos._Dew_T()
else:
Tout=destilado.eos._Bubble_T()
Tin=destilado.eos._Dew_T()
SalidaDestilado=destilado.clone(T=Tout)
#FIXME: o el ejemplo está mal planteado o este valor es ilógico
ToutReboiler=residuo.eos._Bubble_T()
ToutReboiler2=residuo.eos._Dew_T()
print ToutReboiler, ToutReboiler2, Tin, Tout
SalidaResiduo=residuo.clone(T=ToutReboiler)
self.salida=[SalidaDestilado, SalidaResiduo]
inCondenser=destilado.clone(T=Tin, P=self.entrada.P, split=self.RCalculada+1)
outCondenser=destilado.clone(T=Tout, P=self.entrada.P, split=self.RCalculada+1)
self.DutyCondenser=unidades.Power(outCondenser.h-inCondenser.h)
self.DutyReboiler=unidades.Power(SalidaDestilado.h+SalidaResiduo.h-self.DutyCondenser-self.entrada.h)
self.DestiladoT=SalidaDestilado.T
self.DestiladoP=SalidaDestilado.P
self.DestiladoMassFlow=SalidaDestilado.caudalmasico
self.DestiladoMolarComposition=SalidaDestilado.fraccion
self.ResiduoT=SalidaResiduo.T
self.ResiduoP=SalidaResiduo.P
self.ResiduoMassFlow=SalidaResiduo.caudalmasico
self.ResiduoMolarComposition=SalidaResiduo.fraccion
self.LKName=self.salida[0].componente[self.kwargs["LK"]].nombre
self.HKName=self.salida[0].componente[self.kwargs["HK"]].nombre
elif self.material == 2: #Monel
a, b = 70., 5.50
else: #Nickel
a, b = 84.4, 6.56
else: #Proceso inorgánico
if self.material == 0: #Hastelloy
a, b = 300., 10.
elif self.material == 1: #Acero Inoxidable
a, b = 98., 5.06
elif self.material == 2: #Monel
a, b = 114., 7.14
else: #Nickel
a, b = 143., 9.43
W = self.entrada.caudal.Tmh
C = (a + b * W) * 1000
self.C_adq = unidades.Currency(C * self.Current_index /
self.Base_index)
self.C_inst = unidades.Currency(self.C_adq * self.f_install)
if __name__ == '__main__':
entrada = Corriente(423.15, 3, 9000,
[[46, 47, 49, 64], [0.78, 0.21, 0.0001, 0.0009]], [64],
[[1e-6, 1]])
cristalizador = Crystallizer(entrada, 0.1)
# agua=Corriente(300, 1, 4.3756, [[62], [1]])
# scrubber=Scrubber(entrada, agua, 0.1)
self.tiempo.setResaltado(False)
self.deltaP.setReadOnly(False)
self.deltaP.setRetornar(True)
self.deltaP.setResaltado(True)
else:
self.numFiltros.setReadOnly(True)
self.numFiltros.setRetornar(False)
self.numFiltros.setResaltado(False)
self.tiempo.setReadOnly(False)
self.tiempo.setRetornar(True)
self.tiempo.setResaltado(True)
self.deltaP.setReadOnly(False)
self.deltaP.setRetornar(True)
self.deltaP.setResaltado(True)
if __name__ == "__main__":
import sys
from lib.corriente import Mezcla, Corriente, Solid
app = QtWidgets.QApplication(sys.argv)
distribucion = [[17.5, 0.02], [22.4, 0.03], [26.2, 0.05], [31.8, 0.1],
[37, 0.1], [42.4, 0.1], [48, 0.1], [54, 0.1], [60, 0.1],
[69, 0.1], [81.3, 0.1], [96.5, 0.05], [109, 0.03],
[127, 0.02]]
solido = Solid([64], [138718], distribucion)
entrada = Corriente(423.15, 3, 11784, Mezcla([475], [1]), solido)
dialogo = UI_equipment(entrada)
dialogo.show()
sys.exit(app.exec_())
self.DeTube.setValue(material[6])
def showFinTube(self):
dialogo = Dialog_Finned(self.Equipment.kwargs)
if dialogo.exec_():
kwarg = dialogo.kwarg()
self.calculo(**kwarg)
if __name__ == "__main__":
import sys
from lib.corriente import Corriente
app = QtGui.QApplication(sys.argv)
caliente = Corriente(T=140 + 273.15,
P=361540.,
caudalMasico=1.36,
ids=[62],
fraccionMolar=[1.])
fria = Corriente(T=20 + 273.15,
P=101325.,
caudalMasico=5000 / 3600.,
ids=[62],
fraccionMolar=[1.])
Cambiador = Hairpin(entradaTubo=caliente,
entradaExterior=fria,
modo=1,
DiTube=0.0525,
DeTube=0.0603,
DeeTube=0.0779,
kTube=54,
rTube=0.0459994e-3,
17.5e-6, 22.4e-6, 26.2e-6, 31.8e-6, 37e-6, 42.4e-6, 48e-6, 54e-6,
60e-6, 69e-6, 81.3e-6, 96.5e-6, 109e-6, 127e-6
]
fracciones = [
0.02, 0.03, 0.05, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.05, 0.03,
0.02
]
solido = Solid(T=300,
caudalSolido=[1 / 3600.],
distribucion_diametro=diametros,
distribucion_fraccion=fracciones,
solids=[638])
kw = {"fraccionMolar": [1.], "MEoS": True}
aire = Corriente(T=350,
P=101325,
caudalMasico=0.01,
ids=[475],
solido=solido,
**kw)
agua = Corriente(T=300, P=101325, caudalMasico=0.1, ids=[62], **kw)
scrubber = Scrubber(entradaGas=aire,
entradaLiquido=agua,
diametro=0.25,
modelo_rendimiento=0,
modelo_DeltaP=1,
k=1000)
dialogo = UI_equipment(scrubber)
# dialogo = UI_equipment()
dialogo.show()
sys.exit(app.exec_())
valor = self.fracciones.getColumn(0, False)
if self.criterio.currentIndex() == 0:
if len(valor)+1 < self.fracciones.rowCount():
return
elif len(valor)+1 == self.fracciones.rowCount():
valor.append(1-sum(valor))
elif len(valor) == self.fracciones.rowCount():
valor[-1] = 1-sum(valor[:-1])
self.calculo(**{parametro: valor})
def rellenar(self):
UI_equip.rellenar(self)
if self.Equipment.status == 1 and self.criterio.currentIndex() == 1:
self.entrada.setCorriente(self.Equipment.entrada)
def rellenarInput(self):
UI_equip.rellenarInput(self)
self.fracciones.setColumn(0, self.Equipment.kwargs["split"])
if __name__ == "__main__":
import sys
from lib.corriente import Corriente
app = QtWidgets.QApplication(sys.argv)
agua = Corriente(T=300, P=101325, caudalMasico=1, ids=[62],
fraccionMolar=[0.1])
divisor = Divider(entrada=agua, salidas=2, split=[0.3, 0.7])
dialogo = UI_equipment(divisor)
dialogo.show()
sys.exit(app.exec_())
self.rellenoSalida()
def rellenoSalida(self):
pass
def todos_datos(self):
pass
def calcularCostos(self):
if self.todos_datos():
self.ShellTube.Coste(self.factorInstalacion.value(), 0,
self.tipo.currentIndex(),
self.material.currentIndex())
self.C_adq.setValue(self.ShellTube.C_adq.config())
self.C_inst.setValue(self.ShellTube.C_inst.config())
if __name__ == "__main__":
import sys
from lib.corriente import Corriente, Mezcla
app = QtWidgets.QApplication(sys.argv)
agua = Corriente(T=300,
P=101325,
caudalMasico=3600,
ids=[62],
fraccion=[1])
dialogo = UI_equipment(agua)
dialogo.show()
sys.exit(app.exec_())
def calculo(self):
self.entrada = self.kwargs["entrada"]
self.LKsplit = unidades.Dimensionless(self.kwargs["LKsplit"])
self.HKsplit = unidades.Dimensionless(self.kwargs["HKsplit"])
self.RCalculada = unidades.Dimensionless(self.kwargs["R"])
self.R_Rmin = unidades.Dimensionless(self.kwargs["R_Rmin"])
if self.kwargs["Pd"]:
self.Pd = unidades.Pressure(self.kwargs["Pd"])
else:
self.Pd = self.entrada.P
self.DeltaP = unidades.Pressure(self.kwargs["DeltaP"])
#Estimate splits of components
b = []
d = []
for i, caudal_i in enumerate(self.entrada.caudalunitariomolar):
if i == self.kwargs["LK"]:
b.append(caudal_i * (1 - self.LKsplit))
d.append(caudal_i * self.LKsplit)
elif i == self.kwargs["HK"]:
d.append(caudal_i * (1 - self.HKsplit))
b.append(caudal_i * self.HKsplit)
elif self.entrada.eos.Ki[i] > self.entrada.eos.Ki[
self.kwargs["LK"]]:
b.append(0)
d.append(caudal_i)
elif self.entrada.eos.Ki[i] < self.entrada.eos.Ki[
self.kwargs["HK"]]:
d.append(0)
b.append(caudal_i)
else:
d.append(caudal_i * 0.5)
b.append(caudal_i * 0.5)
while True:
bo = b
do = d
xt = [Q / sum(d) for Q in d]
xb = [Q / sum(b) for Q in b]
Qt = sum(
[di * comp.M for di, comp in zip(d, self.entrada.componente)])
Qb = sum(
[bi * comp.M for bi, comp in zip(b, self.entrada.componente)])
destilado = Corriente(T=self.entrada.T,
P=self.Pd,
caudalMasico=Qt,
fraccionMolar=xt)
residuo = Corriente(T=self.entrada.T,
P=self.Pd,
caudalMasico=Qb,
fraccionMolar=xb)
#TODO: Add algorithm to calculate Pd and condenser type fig 12.4 pag 230
#Fenske equation for Nmin
alfam = (destilado.eos.Ki[self.kwargs["LK"]] /
destilado.eos.Ki[self.kwargs["HK"]] *
residuo.eos.Ki[self.kwargs["LK"]] /
residuo.eos.Ki[self.kwargs["HK"]])**0.5
Nmin = log10(
destilado.caudalunitariomolar[self.kwargs["LK"]] /
destilado.caudalunitariomolar[self.kwargs["HK"]] *
residuo.caudalunitariomolar[self.kwargs["HK"]] /
residuo.caudalunitariomolar[self.kwargs["LK"]]) / log10(alfam)
#Evaluación composición salidas
b = []
d = []
for i in range(len(self.entrada.ids)):
if i in [self.kwargs["LK"], self.kwargs["HK"]]:
b.append(bo[i])
d.append(do[i])
else:
alfa = (destilado.eos.Ki[i] /
destilado.eos.Ki[self.kwargs["HK"]] *
residuo.eos.Ki[i] /
residuo.eos.Ki[self.kwargs["HK"]])**0.5
b.append(self.entrada.caudalunitariomolar[i] /
(1 + do[self.kwargs["HK"]] /
bo[self.kwargs["HK"]] * alfa**Nmin))
d.append(self.entrada.caudalunitariomolar[i] *
do[self.kwargs["HK"]] / bo[self.kwargs["HK"]] *
alfa**Nmin / (1 + do[self.kwargs["HK"]] /
bo[self.kwargs["HK"]] * alfa**Nmin))
res = sum([
abs(inicial - final) for inicial, final in zip(bo, b)
]) + sum([abs(inicial - final) for inicial, final in zip(do, d)])
if res < 1e-10:
self.Nmin = Nmin - self.kwargs["condenser"] + 1
break
#Calculo de la razón de reflujo mínima, ecuación de Underwood
alfa = self.entrada.eos.Ki[self.kwargs["LK"]] / self.entrada.eos.Ki[
self.kwargs["HK"]]
self.Rmin = unidades.Dimensionless(
abs(
float(destilado.caudalmolar / self.entrada.caudalmolar *
(destilado.fraccion[self.kwargs["LK"]] /
self.entrada.Liquido.fraccion[self.kwargs["LK"]] -
alfa * destilado.fraccion[self.kwargs["HK"]] /
self.entrada.Liquido.fraccion[self.kwargs["HK"]]) /
(alfa - 1))))
#Cálculo del número de etapas reales, ecuación de Gilliland
if self.R_Rmin and not self.RCalculada:
self.RCalculada = unidades.Dimensionless(self.R_Rmin * self.Rmin)
X = (self.RCalculada - self.Rmin) / (self.RCalculada + 1)
Y = 1 - exp((1 + 54.4 * X) / (11 + 117.2 * X) * (X - 1) / X**0.5)
self.NTray = unidades.Dimensionless((Y + self.Nmin) / (1 - Y) - 1 -
self.kwargs["condenser"])
#Cálculo del piso de la alimentación
if self.kwargs["feed"]: #Ec. de Fenske
alfa_b = residuo.eos.Ki[self.kwargs["LK"]] / residuo.eos.Ki[
self.kwargs["HK"]]
alfa_d = destilado.eos.Ki[self.kwargs["LK"]] / destilado.eos.Ki[
self.kwargs["HK"]]
alfa_f = self.entrada.eos.Ki[
self.kwargs["LK"]] / self.entrada.eos.Ki[self.kwargs["HK"]]
ratio = log(destilado.fraccion[self.kwargs["LK"]] /
self.entrada.fraccion[self.kwargs["LK"]] *
self.entrada.fraccion[self.kwargs["HK"]] /
destilado.fraccion[self.kwargs["HK"]]) / log(
self.entrada.fraccion[self.kwargs["LK"]] /
residuo.fraccion[self.kwargs["LK"]] *
residuo.fraccion[self.kwargs["HK"]] /
self.entrada.fraccion[self.kwargs["HK"]]) * log(
(alfa_b * alfa_f)**0.5) / log(
(alfa_d * alfa_f)**0.5)
else: #Ec. de Kirkbride
ratio = (self.entrada.fraccion[self.kwargs["HK"]] /
self.entrada.fraccion[self.kwargs["LK"]] *
residuo.fraccion[self.kwargs["LK"]]**2 /
destilado.fraccion[self.kwargs["HK"]]**2 *
residuo.caudalmolar / destilado.caudalmolar)**0.206
self.Ns = self.NTray / (ratio + 1)
self.Nr = self.NTray - self.Ns
self.N_feed = unidades.Dimensionless(self.Ns + 1)
if self.kwargs["condenser"]: #Parcial
Tout = destilado.eos._Dew_T()
else:
Tout = destilado.eos._Bubble_T()
Tin = destilado.eos._Dew_T()
SalidaDestilado = destilado.clone(T=Tout)
#FIXME: o el ejemplo está mal planteado o este valor es ilógico
ToutReboiler = residuo.eos._Bubble_T()
ToutReboiler2 = residuo.eos._Dew_T()
print((ToutReboiler, ToutReboiler2, Tin, Tout))
SalidaResiduo = residuo.clone(T=ToutReboiler)
self.salida = [SalidaDestilado, SalidaResiduo]
inCondenser = destilado.clone(T=Tin,
P=self.entrada.P,
split=self.RCalculada + 1)
outCondenser = destilado.clone(T=Tout,
P=self.entrada.P,
split=self.RCalculada + 1)
self.DutyCondenser = unidades.Power(outCondenser.h - inCondenser.h)
self.DutyReboiler = unidades.Power(SalidaDestilado.h +
SalidaResiduo.h -
self.DutyCondenser - self.entrada.h)
self.DestiladoT = SalidaDestilado.T
self.DestiladoP = SalidaDestilado.P
self.DestiladoMassFlow = SalidaDestilado.caudalmasico
self.DestiladoMolarComposition = SalidaDestilado.fraccion
self.ResiduoT = SalidaResiduo.T
self.ResiduoP = SalidaResiduo.P
self.ResiduoMassFlow = SalidaResiduo.caudalmasico
self.ResiduoMolarComposition = SalidaResiduo.fraccion
self.LKName = self.salida[0].componente[self.kwargs["LK"]].nombre
self.HKName = self.salida[0].componente[self.kwargs["HK"]].nombre
# agua=Corriente(T=300, P=101325., caudalMasico=1000, ids=[4, 5, 6, 7, 8, 10, 11, 12, 13], fraccionMolar=[0.02361538, 0.2923077, 0.3638462, 0.02769231, 0.01153846, 0.01769231, 0.03007692, 0.2093846, 0.02384615])
# columna=ColumnFUG(entrada=agua, LK=2, LKsplit=0.9, HK=3, HKsplit=0.9, R_Rmin=1.05, calc_feed=0, DeltaP=0.1)
# print columna.Rmin
# print columna.DutyCondenser.MJh, columna.DutyReboiler.MJh
# blend=Corriente(T=340, P=101325, caudalMasico=1, fraccionMolar=[0.3, 0.5, 0.05, 0.15])
# columna=ColumnFUG(entrada=blend, LK=0, LKsplit=0.9866, HK=3, HKsplit=0.639, R_Rmin=1.1, feed=0)
# P = unidades.Pressure(315, "psi")
# blend=Corriente(T=T, P=P, caudalMasico=1, fraccionMolar=[0.26, 0.09, 0.25, 0.17, 0.11, 0.12])
# columna=ColumnFUG(entrada=blend, LK=0, LKsplit=0.96666, HK=3, HKsplit=0.95, R_Rmin=1.2)
# print columna.DutyCondenser
# print((blend.mezcla.ids))
# kw = {"MEoS": True, "coolProp": True}
# entrada = Corriente(T=300, x=0.5, caudalMasico=0.01, ids=[5, 6, 7, 8],
# fraccionMolar=[.3, 0.5, 0.05, 0.15], **kw)
kw = {"MEoS": True, "coolProp": True, "ids": [5, 6, 7, 8, 10]}
entrada = Corriente(**kw)
entrada(T=300)
entrada(x=0.5)
entrada(caudalMasico=0.01)
entrada(fraccionMolar=[.3, 0.25, 0.05, 0.15, 0.25])
flash = Flash(entrada=entrada)
print(flash.propTxt())
# from scipy import *
# from scipy.integrate import odeint
# from pylab import *
# import matplotlib.pyplot as plt
# batch()
class Pump(equipment):
"""Clase que modela un equipo de bombeo de líquidos
Parámetros:
entrada: instancia de la clase corriente que define la corriente de entrada en la bomba
usarCurva:
0 - Funcionamiento fijo
1 - Funcionamiento siguiendo la curva característica
incognita: Indica la variable a calcular en el caso de que se use la curva caracteristica
0 - Carga (incremento de presión)
1 - Caudal, en este caso sobreescribe el caudal de la corriente de entrada
rendimiento: rendimiento de la bomba, no necesario si se ha definido la curva característica de la bomba
deltaP: incremento de presión proporcionado por la bomba, no será necesario si se define la curva característica y es el caudal la variable a calcular, en atmosferas
Pout: Presión a la salida de la bomba
Carga: Cambio de presión basada en altura de columna de fluido
curvaCaracteristica: array que define la curva característica, en la forma: [Dia, rpm, [Q1,..Qn], [h1,...,hn], [Pot1,...,Potn], [NPSH1,...NPSHn]].
diametro: diametro nominal bomba
velocidad: velocidad de giro de la bomba
Coste
tipo_bomba
0 - Centrifugal pumps
1 - Reciprocating pumps
2 - Gear pumps
3 - Vertical mixed flow
4 - Vertical axial flow
tipo_centrifuga
0 - One stage, 3550 rpm, VSC
1 - One stage, 1750 rpm, VSC
2 - One stage, 3550 rpm, HSC
3 - One stage, 1750 rpm, HSC
4 - Two stage, 3550 rpm, HSC
5 - Multistage, 3550 rpm, HSC
Material
0 - Cast iron
1 - Case steel
2 - 304 or 316 fittings
3 - Stainless steel 304 or 316
4 - Case Gould's alloy no. 20
5 - Nickel
6 - Monel
7 - ISO B
8 - ISO B
9 - Titanium
10 - Hastelloy C
11 - Ductile iron
12 - Bronze
motor: Tipo de motor
0 - Open drip-proof
1 - Totally enclosed, fan-cooled
2 - Explosion-proof
rpm
0 - 3600 rpm
1 - 1800 rpm
2 - 1200 rpm
>>> agua=Corriente(T=300, P=101325, caudalMasico=1, fraccionMolar=[1.])
>>> bomba=Pump(entrada=agua, rendimiento=0.75, deltaP=20*101325, tipo_bomba=1)
>>> print bomba.power.hp
3.63596053358
>>> print bomba.C_inst
3493.24497823
"""
title = QApplication.translate("pychemqt", "Pump")
help = ""
kwargs = {
"entrada": None,
"usarCurva": 0,
"incognita": 0,
"rendimiento": 0.0,
"deltaP": 0.0,
"Pout": 0.0,
"Carga": 0.0,
"curvaCaracteristica": [],
"diametro": 0.0,
"velocidad": 0.0,
"f_install": 2.8,
"Base_index": 0.0,
"Current_index": 0.0,
"tipo_bomba": 0,
"tipo_centrifuga": 0,
"material": 0,
"motor": 0,
"rpm": 0
}
kwargsInput = ("entrada", )
kwargsCheck = ("usarCurva", )
kwargsValue = ("Pout", "deltaP", "rendimiento", "Carga", "diametro",
"velocidad")
kwargsList = ("incognita", "tipo_bomba", "tipo_centrifuga", "material",
"motor", "rpm")
calculateValue = ("PoutCalculada", "power", "headCalculada", "volflow",
"rendimientoCalculado")
calculateCostos = ("C_bomba", "C_motor", "C_adq", "C_inst")
indiceCostos = 7
TEXT_BOMBA = [
QApplication.translate("pychemqt", "Centrifugal"),
QApplication.translate("pychemqt", "Reciprocating"),
QApplication.translate("pychemqt", "Gear pump"),
QApplication.translate("pychemqt", "Vertical mixed flow"),
QApplication.translate("pychemqt", "Vertical axial flow")
]
TEXT_CENTRIFUGA = [
QApplication.translate("pychemqt", "One stage, 3550 rpm, VSC"),
QApplication.translate("pychemqt", "One stage, 1750 rpm, VSC"),
QApplication.translate("pychemqt", "One stage, 3550 rpm, HSC"),
QApplication.translate("pychemqt", "One stage, 1750 rpm, HSC"),
QApplication.translate("pychemqt", "Two stage, 3550 rpm, HSC"),
QApplication.translate("pychemqt", "Multistage, 3550 rpm, HSC")
]
TEXT_MATERIAL = [
QApplication.translate("pychemqt", "Cast iron"),
QApplication.translate("pychemqt", "Case steel"),
QApplication.translate("pychemqt", "304 or 316 fittings"),
QApplication.translate("pychemqt", "Stainless steel 304 or 316"),
QApplication.translate("pychemqt", "Case Gould's alloy no. 20"),
QApplication.translate("pychemqt", "Nickel"),
QApplication.translate("pychemqt", "Monel (Ni-Cu)"),
QApplication.translate("pychemqt", "ISO B"),
QApplication.translate("pychemqt", "ISO C"),
QApplication.translate("pychemqt", "Titanium"),
QApplication.translate("pychemqt", "Hastelloy C (Ni-Fe-Mo)"),
QApplication.translate("pychemqt", "Ductile iron"),
QApplication.translate("pychemqt", "Bronze")
]
TEXT_MOTOR = [
QApplication.translate("pychemqt", "Open drip-proof"),
QApplication.translate("pychemqt", "Totally enclosed, fan-cooled"),
QApplication.translate("pychemqt", "Explosion-proof")
]
TEXT_RPM = ["3600 RPM", "1800 RPM", "1200 RPM"]
@property
def isCalculable(self):
if self.kwargs["f_install"] and self.kwargs[
"Base_index"] and self.kwargs["Current_index"]:
self.statusCoste = True
else:
self.statusCoste = False
if not self.kwargs["entrada"]:
self.msg = QApplication.translate("pychemqt", "undefined input")
self.status = 0
else:
presion = self.kwargs["Pout"] or self.kwargs[
"deltaP"] or self.kwargs["Carga"]
if self.kwargs["usarCurva"]:
if self.kwargs["incognita"]:
if presion and self.kwargs["curvaCaracteristica"]:
self.msg = ""
self.status = 1
return True
elif presion:
self.msg = QApplication.translate(
"pychemqt", "undefined pump curve")
self.status = 0
else:
self.msg = QApplication.translate(
"pychemqt", "undefined out pressure condition")
self.status = 0
elif self.kwargs["curvaCaracteristica"]:
self.msg = ""
self.status = 1
return True
else:
self.msg = QApplication.translate("pychemqt",
"undefined pump curve")
self.status = 0
else:
if presion and self.kwargs["rendimiento"]:
self.msg = ""
self.status = 1
return True
elif presion:
self.msg = QApplication.translate("pychemqt",
"undefined efficiency")
self.status = 0
else:
self.msg = QApplication.translate(
"pychemqt", "undefined out pressure condition")
self.status = 0
def calculo(self):
self.entrada = self.kwargs["entrada"]
self.rendimientoCalculado = Dimensionless(self.kwargs["rendimiento"])
if self.kwargs["Pout"]:
DeltaP = Pressure(self.kwargs["Pout"] - self.entrada.P)
elif self.kwargs["deltaP"]:
DeltaP = Pressure(self.kwargs["deltaP"])
elif self.kwargs["Carga"]:
DeltaP = Pressure(self.kwargs["Carga"] * self.entrada.Liquido.rho *
g)
else:
DeltaP = Pressure(0)
if self.kwargs["usarCurva"]:
if self.kwargs["diametro"] != self.kwargs["curvaCaracteristica"][
0] or self.kwargs["velocidad"] != self.kwargs[
"curvaCaracteristica"][1]:
self.curvaActual = self.calcularCurvaActual()
else:
self.curvaActual = self.kwargs["curvaCaracteristica"]
self.Ajustar_Curvas_Caracteristicas()
if not self.kwargs["usarCurva"]:
head = Length(DeltaP / g / self.entrada.Liquido.rho)
power = Power(head * g * self.entrada.Liquido.rho *
self.entrada.Q / self.rendimientoCalculado)
P_freno = Power(power * self.rendimientoCalculado)
elif not self.kwargs["incognita"]:
head = Length(polyval(self.CurvaHQ, self.entrada.Q))
self.DeltaP = Pressure(head * g * self.entrada.Liquido.rho)
power = Power(self.entrada.Q * DeltaP)
P_freno = Power(polyval(self.CurvaPotQ, self.entrada.Q))
self.rendimientoCalculado = Dimensionless(power / P_freno)
else:
head = Length(self.DeltaP / g / self.entrada.Liquido.rho)
caudalvolumetrico = roots(
[self.CurvaHQ[0], self.CurvaHQ[1], self.CurvaHQ[2] - head])[0]
power = Power(caudalvolumetrico * self.DeltaP)
self.entrada = Corriente(
self.entrada.T, self.entrada.P.atm,
caudalvolumetrico * self.entrada.Liquido.rho * 3600,
self.entrada.mezcla, self.entrada.solido)
P_freno = Power(polyval(self.CurvaPotQ, caudalvolumetrico))
self.rendimientoCalculado = Dimensionless(power / P_freno)
self.headCalculada = head
self.power = power
self.P_freno = P_freno
self.salida = [self.entrada.clone(P=self.entrada.P + DeltaP)]
self.Pin = self.entrada.P
self.PoutCalculada = self.salida[0].P
self.Q = self.entrada.Q.galUSmin
self.volflow = self.entrada.Q
def Ajustar_Curvas_Caracteristicas(self):
"""Define la curva característica de la bomba a partir de los datos, todos ellos en forma de array de igual dimensión
Q: caudal, m3/s
h: carga, m
mu: rendimiento
NPSHr: carga neta de aspiración requerida por la bomba para no entrar en cavitación
"""
Q = r_[self.curvaActual[2]]
h = r_[self.curvaActual[3]]
Pot = r_[self.curvaActual[4]]
NPSH = r_[self.curvaActual[5]]
funcion_h = lambda p, x: p[0] * x**2 + p[1] * x + p[
2] # Función a ajustar
residuo_h = lambda p, x, y: funcion_h(p, x) - y # Residuo
inicio = r_[0, 0, 0]
ajuste_h, exito_h = optimize.leastsq(residuo_h, inicio, args=(Q, h))
self.CurvaHQ = ajuste_h
funcion_Pot = lambda p, x: p[0] * x**2 + p[1] * x + p[
2] # Función a ajustar
residuo_Pot = lambda p, x, y: funcion_Pot(p, x) - y # Residuo
inicio = r_[0, 0, 0]
ajuste_Pot, exito_Pot = optimize.leastsq(residuo_Pot,
inicio,
args=(Q, Pot))
self.CurvaPotQ = ajuste_Pot
funcion_NPSH = lambda p, x: p[0] + p[1] * exp(p[2] * x
) # Función a ajustar
residuo_NPSH = lambda p, x, y: funcion_NPSH(p, x) - y # Residuo
inicio = r_[0, 0, 0]
ajuste_NPSH, exito_NPSH = optimize.leastsq(residuo_NPSH,
inicio,
args=(Q, NPSH))
self.CurvaNPSHQ = ajuste_NPSH
def calcularCurvaActual(self):
"""Método que define curvas caracteristica de la bomba a una velocidad de giro y diametro del propulsor diferente de la curva característica original haciendo uso de las leyes de afinidad, perry 10.25 Table 10.7"""
D1 = self.kwargs["curvaCaracteristica"][0]
N1 = self.kwargs["curvaCaracteristica"][1]
D2 = self.kwargs["diametro"]
N2 = self.kwargs["velocidad"]
Q1 = r_[self.kwargs["curvaCaracteristica"][2]]
h1 = r_[self.kwargs["curvaCaracteristica"][3]]
Pot1 = r_[self.kwargs["curvaCaracteristica"][4]]
npsh1 = r_[self.kwargs["curvaCaracteristica"][5]]
Q2 = Q1 * D2 / D1 * N2 / N1
h2 = h1 * N2**2 / N1**2 * D2**2 / D1**2
Pot2 = Pot1 * N2**3 / N1**3 * D2**3 / D1**3
npsh2 = npsh1 * N2**2 / N1**2 * D2**2 / D1**2 #Esta relación no es tan fiable como las anteriores
return [D2, N2, Q2, h2, Pot2, npsh2]
def coste(self):
HP = self.power.hp
LnHP = log(self.power.hp)
#Coste Bomba
if self.kwargs["tipo_bomba"] == 0: #Centrifugal pumps
QH = log(self.Q * self.power.hp**0.5)
Fm = [
1., 1.35, 1.15, 2., 2., 3.5, 3.3, 4.95, 4.6, 9.7, 2.95, 1.15,
1.90
]
b1 = [0., 5.1029, 0.0632, 2.0290, 13.7321,
9.8849][self.kwargs["tipo_centrifuga"]]
b2 = [0., -1.2217, 0.2744, -0.2371, -2.8304,
-1.6164][self.kwargs["tipo_centrifuga"]]
b3 = [0., 0.0771, -0.0253, 0.0102, 0.1542,
0.0834][self.kwargs["tipo_centrifuga"]]
Ft = exp(b1 + b2 * QH + b3 * QH**2)
Cb = Fm[self.kwargs["material"]] * Ft * 1.55 * exp(8.833 -
0.6019 * QH +
0.0519 * QH**2)
elif self.kwargs["tipo_bomba"] == 1: #Reciprocating pumps
if self.kwargs["material"] == 0: #Case iron
Cb = 40. * self.Q**0.81
elif self.kwargs["material"] == 3: #316 Staineless steel
Cb = 410. * self.Q**0.52
elif self.kwargs["material"] == 12: #Bronze
Cb = 410. * 1.4 * self.Q**0.52
elif self.kwargs["material"] == 5: #Nickel
Cb = 410. * 1.86 * self.Q**0.52
elif self.kwargs["material"] == 6: #Monel
Cb = 410. * 2.20 * self.Q**0.52
else: #Material not available. Assume case iron
Cb = 40. * self.Q**0.81
elif self.kwargs["tipo_bomba"] == 2: #Gear pumps
Cb = 1000 * exp(-0.0881 + 0.1986 * log(self.Q) +
0.0291 * log(self.Q)**2)
elif self.kwargs["tipo_bomba"] == 3: #Vertical mixed flow
Cb = 0.036 * self.Q**0.82 * 1000
elif self.kwargs["tipo_bomba"] == 4: #Vertical axial flow
Cb = 0.02 * self.Q**0.78 * 1000
C_bomba = Cb * self.kwargs["Current_index"] / self.kwargs["Base_index"]
#Coste motor
if self.kwargs["motor"] == 0: #Open, drip-proof
if self.kwargs["rpm"] == 0 and HP <= 7.5:
a1, a2, a3 = 4.8314, 0.0966, 0.10960
elif self.kwargs["rpm"] == 0 and 7.5 < HP <= 250.:
a1, a2, a3 = 4.1514, 0.5347, 0.05252
elif self.kwargs["rpm"] == 0 and HP > 250.:
a1, a2, a3 = 4.2432, 1.03251, -0.03595
elif self.kwargs["rpm"] == 1 and HP <= 7.5:
a1, a2, a3 = 4.7075, -0.01511, 0.22888
elif self.kwargs["rpm"] == 1 and 7.5 < HP <= 250:
a1, a2, a3 = 4.5212, 0.47242, 0.04820
elif self.kwargs["rpm"] == 1 and HP > 250.:
a1, a2, a3 = 7.4044, -0.06464, 0.05448
elif self.kwargs["rpm"] == 2 and HP <= 7.5:
a1, a2, a3 = 4.9298, 0.30118, 0.12630
elif self.kwargs["rpm"] == 2 and 7.5 < HP <= 250:
a1, a2, a3 = 5.0999, 0.35861, 0.06052
elif self.kwargs["rpm"] == 2 and HP > 250.:
a1, a2, a3 = 4.6163, 0.88531, -0.02188
elif self.kwargs["motor"] == 1: #Totally enclosed, fan-cooled
if self.kwargs["rpm"] == 0 and HP <= 7.5:
a1, a2, a3 = 5.1058, 0.03316, 0.15374
elif self.kwargs["rpm"] == 0 and 7.5 < HP <= 250.:
a1, a2, a3 = 3.8544, 0.83311, 0.02399
elif self.kwargs["rpm"] == 0 and HP > 250.:
a1, a2, a3 = 5.3182, 1.08470, -0.05695
elif self.kwargs["rpm"] == 1 and HP <= 7.5:
a1, a2, a3 = 4.9687, -0.00930, 0.22616
elif self.kwargs["rpm"] == 1 and HP > 7.5:
a1, a2, a3 = 4.5347, 0.57065, 0.04609
elif self.kwargs["rpm"] == 2 and HP <= 7.5:
a1, a2, a3 = 5.1532, 0.28931, 0.14357
elif self.kwargs["rpm"] == 2 and HP > 7.5:
a1, a2, a3 = 5.3858, 0.31004, 0.07406
elif self.kwargs["motor"] == 2: #Explosion-proof
if self.kwargs["rpm"] == 0 and HP <= 7.5:
a1, a2, a3 = 5.3934, -0.00333, 0.15475
elif self.kwargs["rpm"] == 0 and HP > 7.5:
a1, a2, a3 = 4.4442, 0.60820, 0.05202
elif self.kwargs["rpm"] == 1 and HP <= 7.5:
a1, a2, a3 = 5.2851, 0.00048, 0.19949
elif self.kwargs["rpm"] == 1 and HP > 7.5:
a1, a2, a3 = 4.8178, 0.51086, 0.05293
elif self.kwargs["rpm"] == 2 and HP <= 7.5:
a1, a2, a3 = 5.4166, 0.31216, 0.10573
elif self.kwargs["rpm"] == 2 and HP > 7.5:
a1, a2, a3 = 5.5655, 0.31284, 0.07212
C_motor = 1.2 * exp(a1 + a2 * LnHP + a3 * LnHP**2) * self.kwargs[
"Current_index"] / self.kwargs["Base_index"]
self.C_bomba = Currency(C_bomba)
self.C_motor = Currency(C_motor)
self.C_adq = Currency(C_bomba + C_motor)
self.C_inst = Currency(self.C_adq * self.kwargs["f_install"])
def propTxt(self):
txt = "#---------------" + QApplication.translate(
"pychemqt",
"Calculate properties") + "-----------------#" + os.linesep
txt += "%-25s\t%s" % (QApplication.translate(
"pychemqt", "Input Pressure"), self.entrada.P.str) + os.linesep
txt += "%-25s\t%s" % (QApplication.translate(
"pychemqt", "Output Pressure"), self.salida[0].P.str) + os.linesep
txt += "%-25s\t%s" % (QApplication.translate(
"pychemqt", "Head"), self.headCalculada.str) + os.linesep
txt += "%-25s\t%s" % (QApplication.translate(
"pychemqt", "Brake horsepower"), self.P_freno.str) + os.linesep
txt += "%-25s\t%s" % (QApplication.translate(
"pychemqt", "Volumetric Flow"), self.volflow.str) + os.linesep
txt += "%-25s\t%s" % (QApplication.translate(
"pychemqt", "Power"), self.power.str) + os.linesep
txt += "%-25s\t %0.4f" % (QApplication.translate(
"pychemqt", "Efficiency"), self.rendimientoCalculado) + os.linesep
txt += "%-25s\t %0.4f" % ("Cp/Cv",
self.entrada.Liquido.cp_cv) + os.linesep
if self.statusCoste:
txt += os.linesep
txt += "#---------------" + QApplication.translate(
"pychemqt", "Preliminary Cost Estimation"
) + "-----------------#" + os.linesep
txt += "%-25s\t %0.2f" % (QApplication.translate(
"pychemqt",
"Base index"), self.kwargs["Base_index"]) + os.linesep
txt += "%-25s\t %0.2f" % (QApplication.translate(
"pychemqt",
"Current index"), self.kwargs["Current_index"]) + os.linesep
txt += "%-25s\t %0.2f" % (QApplication.translate(
"pychemqt",
"Install factor"), self.kwargs["f_install"]) + os.linesep
txt += "%-25s\t %s" % (QApplication.translate(
"pychemqt",
"Pump type"), self.TEXT_BOMBA[self.kwargs["tipo_bomba"]])
if self.kwargs["tipo_bomba"] == 0:
txt += ", " + self.TEXT_CENTRIFUGA[
self.kwargs["tipo_centrifuga"]] + os.linesep
else:
txt += os.linesep
txt += "%-25s\t %s" % (
QApplication.translate("pychemqt", "Material"),
self.TEXT_MATERIAL[self.kwargs["material"]]) + os.linesep
txt += "%-25s\t%s" % (QApplication.translate(
"pychemqt", "Pump Cost"), self.C_bomba.str) + os.linesep
txt += "%-25s\t %s, %s" % (
QApplication.translate("pychemqt", "Motor type"),
self.TEXT_MOTOR[self.kwargs["motor"]],
self.TEXT_RPM[self.kwargs["rpm"]]) + os.linesep
txt += "%-25s\t%s" % (QApplication.translate(
"pychemqt", "Motor Cost"), self.C_motor.str) + os.linesep
txt += "%-25s\t%s" % (QApplication.translate(
"pychemqt", "Purchase Cost"), self.C_adq.str) + os.linesep
txt += "%-25s\t%s" % (QApplication.translate(
"pychemqt", "Installed Cost"), self.C_inst.str) + os.linesep
return txt
@classmethod
def propertiesEquipment(cls):
list = [
(QApplication.translate("pychemqt",
"Input Pressure"), "Pin", Pressure),
(QApplication.translate("pychemqt", "Output Pressure"),
"PoutCalculada", Pressure),
(QApplication.translate("pychemqt",
"Head"), "headCalculada", Length),
(QApplication.translate("pychemqt",
"Brake horsepower"), "P_freno", Power),
(QApplication.translate("pychemqt",
"Volumetric Flow"), "volflow", VolFlow),
(QApplication.translate("pychemqt", "Power"), "power", Power),
(QApplication.translate("pychemqt", "Efficiency"),
"rendimientoCalculado", Dimensionless),
(QApplication.translate("pychemqt", "Pump Type"),
("TEXT_BOMBA", "tipo_bomba"), str),
(QApplication.translate("pychemqt", "Centrifuge Type"),
("TEXT_CENTRIFUGA", "tipo_centrifuga"), str),
(QApplication.translate("pychemqt", "Material"),
("TEXT_MATERIAL", "material"), str),
(QApplication.translate("pychemqt", "Motor Type"), ("TEXT_MOTOR",
"motor"), str),
(QApplication.translate("pychemqt",
"Motor RPM"), ("TEXT_RPM", "rpm"), str),
(QApplication.translate("pychemqt",
"Pump Cost"), "C_bomba", Currency),
(QApplication.translate("pychemqt",
"Motor Cost"), "C_motor", Currency),
(QApplication.translate("pychemqt",
"Purchase Cost"), "C_adq", Currency),
(QApplication.translate("pychemqt",
"Installed Cost"), "C_inst", Currency)
]
return list
def datamap2xls(self):
datamap = (
("PoutCalculada", "value", "H15"),
("PoutCalculada", "unit", "I15"),
("Pin", "value", "H16"),
("Pin", "unit", "I16"),
)
return datamap
def export2pdf(self):
bomba = pdf("Bomba")
bomba.bomba(self)
bomba.dibujar()
os.system("evince datasheet.pdf")
def export2xls(self):
font0 = xlwt.Font()
font0.bold = True
font0.height = 300
print font0.height
style0 = xlwt.XFStyle()
style0.font = font0
style1 = xlwt.XFStyle()
style1.num_format_str = 'D-MMM-YY'
wb = xlwt.Workbook()
ws = wb.add_sheet('A Test Sheet')
ws.write(0, 0, 'Test', style0)
ws.write(2, 0, 1)
ws.write(2, 1, 1)
ws.write(2, 2, xlwt.Formula("A3+B3"))
wb.save('datasheet.xls')
os.system("gnumeric datasheet.xls")
def loadFromStream(self, stream, huella=True, run=True):
"""Read project from stream
huella: boolean to save project file to pychemqt_temporal"""
# read configuration
config = ConfigParser()
for i in range(stream.readInt32()):
section = stream.readString()
config.add_section(section)
for contador_option in range(stream.readInt32()):
option = stream.readString()
valor = stream.readString()
config.set(section, option, valor)
#TODO: Necesario para cargar los proyectos viejos
# config.set("Thermo", "freesteam", "False")
config.set("Units", "MolarSpecificHeat", "0")
self.setConfig(config)
if not huella:
os.rename(conf_dir + "pychemqtrc_temporal",
conf_dir + "pychemqtrc_temporal_bak")
config.write(open(conf_dir + "pychemqtrc_temporal", "w"))
# read equipments
items = {}
contador_equipos = stream.readInt32()
for i in range(contador_equipos):
id = stream.readString()
if id[0] == "e":
equip = equipments[stream.readInt32()]()
equip.readFromStream(stream, run)
else:
equip = None
items[id] = equip
self.setItems(items)
# read streams
streams = {}
contador_streams = stream.readInt32()
for item in range(contador_streams):
id = stream.readInt32()
up = stream.readString()
down = stream.readString()
ind_up = stream.readInt32()
ind_down = stream.readInt32()
obj = Corriente()
obj.readFromStream(stream, run)
streams[id] = (up, down, ind_up, ind_down, obj)
if huella:
if down[0] == "e":
equip = self.items[down]
if isinstance(equip, Mixer):
kwargs = {"entrada": obj, "id_entrada": ind_down}
else:
kwargs = {equip.kwargsInput[ind_down]: obj}
equip(**kwargs)
self.setStreams(streams)
if not huella:
os.rename(conf_dir + "pychemqtrc_temporal_bak",
conf_dir + "pychemqtrc_temporal")
(QApplication.translate("pychemqt",
"Purchase Cost"), "C_adq", Currency),
(QApplication.translate("pychemqt",
"Installed Cost"), "C_inst", Currency)
]
return list
if __name__ == '__main__':
# import doctest
# doctest.testmod()
# corriente=Corriente(T=400, P=101325, caudalMasico=0.1, fraccionMasica=[1., 0, 0, 0])
# compresor=Compressor(entrada=corriente, metodo=1, termodinamica=0, razon=3, rendimiento=0.75, etapas=1)
# print compresor.power.kW
# compresor(compresor=2, transmision=1, motor=0, rpm=1)
# print compresor.C_inst
corriente = Corriente(T=873.15,
P=1013250,
caudalMasico=0.1,
fraccionMasica=[1.])
turbina = Turbine(entrada=corriente, metodo=1, razon=0.3, rendimiento=0.5)
print turbina.power.MJh
print turbina.C_inst
print turbina.salida[0].T
# agua=Corriente(T=500, P=101325., caudalMasico=1, fraccionMasica=[1.])
# print agua.P*2
# compresor=Compressor(entrada=agua, Pout=5*101325, rendimiento=0.75)
decimales=2)
self.C_inst.setReadOnly(True)
layout.addWidget(self.C_inst, 1, 2)
lyt_Cost.addItem(
QtWidgets.QSpacerItem(20, 20, QtWidgets.QSizePolicy.Expanding,
QtWidgets.QSizePolicy.Expanding), 13, 0, 1,
6)
# Output tab
self.addSalida(
QtWidgets.QApplication.translate("pychemqt", "Destilate"))
self.addSalida(QtWidgets.QApplication.translate("pychemqt", "Residue"))
if equipment:
self.setEquipment(equipment)
if __name__ == "__main__":
import sys
from lib.corriente import Corriente
app = QtWidgets.QApplication(sys.argv)
entrada = Corriente(T=340,
P=101325,
caudalMasico=0.01,
ids=[10, 38, 22, 61],
fraccionMolar=[.3, 0.5, 0.05, 0.15])
flash = Flash(entrada=entrada)
dialogo = UI_equipment(flash)
dialogo.show()
sys.exit(app.exec_())
self.rendimientoAdmisible.setResaltado(tipo_calculo)
self.changeParams("metodo", tipo_calculo)
if __name__ == "__main__":
import sys
from lib.corriente import Corriente, Solid
app = QtWidgets.QApplication(sys.argv)
diametros = [
17.5e-6, 22.4e-6, 26.2e-6, 31.8e-6, 37e-6, 42.4e-6, 48e-6, 54e-6,
60e-6, 69e-6, 81.3e-6, 96.5e-6, 109e-6, 127e-6
]
fracciones = [
0.02, 0.03, 0.05, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.05, 0.03,
0.02
]
solido = Solid(caudalSolido=[0.1],
distribucion_diametro=diametros,
distribucion_fraccion=fracciones)
corriente = Corriente(T=300,
P=101325,
caudalMasico=1.,
fraccionMolar=[1.],
solido=solido)
precipitador = ElectricPrecipitator(entrada=corriente,
metodo=1,
rendimientoAdmisible=0.9)
dialogo = UI_equipment(precipitador)
dialogo.show()
sys.exit(app.exec_())
class Pump(equipment):
"""Clase que modela un equipo de bombeo de líquidos
Parámetros:
entrada: instancia de la clase corriente que define la corriente de entrada en la bomba
usarCurva:
0 - Funcionamiento fijo
1 - Funcionamiento siguiendo la curva característica
incognita: Indica la variable a calcular en el caso de que se use la curva caracteristica
0 - Carga (incremento de presión)
1 - Caudal, en este caso sobreescribe el caudal de la corriente de entrada
rendimiento: rendimiento de la bomba, no necesario si se ha definido la curva característica de la bomba
deltaP: incremento de presión proporcionado por la bomba, no será necesario si se define la curva característica y es el caudal la variable a calcular, en atmosferas
Pout: Presión a la salida de la bomba
Carga: Cambio de presión basada en altura de columna de fluido
curvaCaracteristica: array que define la curva característica, en la forma: [Dia, rpm, [Q1,..Qn], [h1,...,hn], [Pot1,...,Potn], [NPSH1,...NPSHn]].
diametro: diametro nominal bomba
velocidad: velocidad de giro de la bomba
Coste
tipo_bomba
0 - Centrifugal pumps
1 - Reciprocating pumps
2 - Gear pumps
3 - Vertical mixed flow
4 - Vertical axial flow
tipo_centrifuga
0 - One stage, 3550 rpm, VSC
1 - One stage, 1750 rpm, VSC
2 - One stage, 3550 rpm, HSC
3 - One stage, 1750 rpm, HSC
4 - Two stage, 3550 rpm, HSC
5 - Multistage, 3550 rpm, HSC
Material
0 - Cast iron
1 - Case steel
2 - 304 or 316 fittings
3 - Stainless steel 304 or 316
4 - Case Gould's alloy no. 20
5 - Nickel
6 - Monel
7 - ISO B
8 - ISO B
9 - Titanium
10 - Hastelloy C
11 - Ductile iron
12 - Bronze
motor: Tipo de motor
0 - Open drip-proof
1 - Totally enclosed, fan-cooled
2 - Explosion-proof
rpm
0 - 3600 rpm
1 - 1800 rpm
2 - 1200 rpm
>>> agua=Corriente(T=300, P=101325, caudalMasico=1, fraccionMolar=[1.])
>>> bomba=Pump(entrada=agua, rendimiento=0.75, deltaP=20*101325, tipo_bomba=1)
>>> print bomba.power.hp
3.63596053358
>>> print bomba.C_inst
3493.24497823
"""
title=QApplication.translate("pychemqt", "Pump")
help=""
kwargs={"entrada": None,
"usarCurva": 0,
"incognita": 0,
"rendimiento": 0.0,
"deltaP": 0.0,
"Pout": 0.0,
"Carga": 0.0,
"curvaCaracteristica": [],
"diametro": 0.0,
"velocidad": 0.0,
"f_install": 2.8,
"Base_index": 0.0,
"Current_index": 0.0,
"tipo_bomba": 0,
"tipo_centrifuga": 0,
"material": 0,
"motor": 0,
"rpm": 0}
kwargsInput=("entrada", )
kwargsCheck=("usarCurva", )
kwargsValue=("Pout", "deltaP", "rendimiento", "Carga", "diametro", "velocidad")
kwargsList=("incognita", "tipo_bomba", "tipo_centrifuga", "material", "motor", "rpm")
calculateValue=("PoutCalculada", "power", "headCalculada", "volflow", "rendimientoCalculado")
calculateCostos=("C_bomba", "C_motor", "C_adq", "C_inst")
indiceCostos=7
TEXT_BOMBA=[QApplication.translate("pychemqt", "Centrifugal"),
QApplication.translate("pychemqt", "Reciprocating"),
QApplication.translate("pychemqt", "Gear pump"),
QApplication.translate("pychemqt", "Vertical mixed flow"),
QApplication.translate("pychemqt", "Vertical axial flow")]
TEXT_CENTRIFUGA=[QApplication.translate("pychemqt", "One stage, 3550 rpm, VSC"),
QApplication.translate("pychemqt", "One stage, 1750 rpm, VSC"),
QApplication.translate("pychemqt", "One stage, 3550 rpm, HSC"),
QApplication.translate("pychemqt", "One stage, 1750 rpm, HSC"),
QApplication.translate("pychemqt", "Two stage, 3550 rpm, HSC"),
QApplication.translate("pychemqt", "Multistage, 3550 rpm, HSC")]
TEXT_MATERIAL=[QApplication.translate("pychemqt", "Cast iron"),
QApplication.translate("pychemqt", "Case steel"),
QApplication.translate("pychemqt", "304 or 316 fittings"),
QApplication.translate("pychemqt", "Stainless steel 304 or 316"),
QApplication.translate("pychemqt", "Case Gould's alloy no. 20"),
QApplication.translate("pychemqt", "Nickel"),
QApplication.translate("pychemqt", "Monel (Ni-Cu)"),
QApplication.translate("pychemqt", "ISO B"),
QApplication.translate("pychemqt", "ISO C"),
QApplication.translate("pychemqt", "Titanium"),
QApplication.translate("pychemqt", "Hastelloy C (Ni-Fe-Mo)"),
QApplication.translate("pychemqt", "Ductile iron"),
QApplication.translate("pychemqt", "Bronze")]
TEXT_MOTOR=[QApplication.translate("pychemqt", "Open drip-proof"),
QApplication.translate("pychemqt", "Totally enclosed, fan-cooled"),
QApplication.translate("pychemqt", "Explosion-proof")]
TEXT_RPM=["3600 RPM", "1800 RPM", "1200 RPM"]
@property
def isCalculable(self):
if self.kwargs["f_install"] and self.kwargs["Base_index"] and self.kwargs["Current_index"]:
self.statusCoste=True
else:
self.statusCoste=False
if not self.kwargs["entrada"]:
self.msg=QApplication.translate("pychemqt", "undefined input")
self.status=0
else:
presion=self.kwargs["Pout"] or self.kwargs["deltaP"] or self.kwargs["Carga"]
if self.kwargs["usarCurva"]:
if self.kwargs["incognita"]:
if presion and self.kwargs["curvaCaracteristica"]:
self.msg=""
self.status=1
return True
elif presion:
self.msg=QApplication.translate("pychemqt", "undefined pump curve")
self.status=0
else:
self.msg=QApplication.translate("pychemqt", "undefined out pressure condition")
self.status=0
elif self.kwargs["curvaCaracteristica"]:
self.msg=""
self.status=1
return True
else:
self.msg=QApplication.translate("pychemqt", "undefined pump curve")
self.status=0
else:
if presion and self.kwargs["rendimiento"]:
self.msg=""
self.status=1
return True
elif presion:
self.msg=QApplication.translate("pychemqt", "undefined efficiency")
self.status=0
else:
self.msg=QApplication.translate("pychemqt", "undefined out pressure condition")
self.status=0
def calculo(self):
self.entrada=self.kwargs["entrada"]
self.rendimientoCalculado=Dimensionless(self.kwargs["rendimiento"])
if self.kwargs["Pout"]:
DeltaP=Pressure(self.kwargs["Pout"]-self.entrada.P)
elif self.kwargs["deltaP"]:
DeltaP=Pressure(self.kwargs["deltaP"])
elif self.kwargs["Carga"]:
DeltaP=Pressure(self.kwargs["Carga"]*self.entrada.Liquido.rho*g)
else:
DeltaP=Pressure(0)
if self.kwargs["usarCurva"]:
if self.kwargs["diametro"]!=self.kwargs["curvaCaracteristica"][0] or self.kwargs["velocidad"]!=self.kwargs["curvaCaracteristica"][1]:
self.curvaActual=self.calcularCurvaActual()
else:
self.curvaActual=self.kwargs["curvaCaracteristica"]
self.Ajustar_Curvas_Caracteristicas()
if not self.kwargs["usarCurva"]:
head=Length(DeltaP/g/self.entrada.Liquido.rho)
power=Power(head*g*self.entrada.Liquido.rho*self.entrada.Q/self.rendimientoCalculado)
P_freno=Power(power*self.rendimientoCalculado)
elif not self.kwargs["incognita"]:
head=Length(polyval(self.CurvaHQ,self.entrada.Q))
self.DeltaP=Pressure(head*g*self.entrada.Liquido.rho)
power=Power(self.entrada.Q*DeltaP)
P_freno=Power(polyval(self.CurvaPotQ,self.entrada.Q))
self.rendimientoCalculado=Dimensionless(power/P_freno)
else:
head=Length(self.DeltaP/g/self.entrada.Liquido.rho)
caudalvolumetrico=roots([self.CurvaHQ[0], self.CurvaHQ[1], self.CurvaHQ[2]-head])[0]
power=Power(caudalvolumetrico*self.DeltaP)
self.entrada=Corriente(self.entrada.T, self.entrada.P.atm, caudalvolumetrico*self.entrada.Liquido.rho*3600, self.entrada.mezcla, self.entrada.solido)
P_freno=Power(polyval(self.CurvaPotQ,caudalvolumetrico))
self.rendimientoCalculado=Dimensionless(power/P_freno)
self.headCalculada=head
self.power=power
self.P_freno=P_freno
self.salida=[self.entrada.clone(P=self.entrada.P+DeltaP)]
self.Pin=self.entrada.P
self.PoutCalculada=self.salida[0].P
self.Q=self.entrada.Q.galUSmin
self.volflow=self.entrada.Q
def Ajustar_Curvas_Caracteristicas(self):
"""Define la curva característica de la bomba a partir de los datos, todos ellos en forma de array de igual dimensión
Q: caudal, m3/s
h: carga, m
mu: rendimiento
NPSHr: carga neta de aspiración requerida por la bomba para no entrar en cavitación
"""
Q=r_[self.curvaActual[2]]
h=r_[self.curvaActual[3]]
Pot=r_[self.curvaActual[4]]
NPSH=r_[self.curvaActual[5]]
funcion_h = lambda p, x: p[0]*x**2+p[1]*x+p[2] # Función a ajustar
residuo_h = lambda p, x, y: funcion_h(p, x) - y # Residuo
inicio=r_[0, 0, 0]
ajuste_h, exito_h=optimize.leastsq(residuo_h,inicio,args=(Q, h))
self.CurvaHQ=ajuste_h
funcion_Pot = lambda p, x: p[0]*x**2+p[1]*x+p[2] # Función a ajustar
residuo_Pot = lambda p, x, y: funcion_Pot(p, x) - y # Residuo
inicio=r_[0, 0, 0]
ajuste_Pot, exito_Pot=optimize.leastsq(residuo_Pot,inicio,args=(Q, Pot))
self.CurvaPotQ=ajuste_Pot
funcion_NPSH = lambda p, x: p[0]+p[1]*exp(p[2]*x) # Función a ajustar
residuo_NPSH = lambda p, x, y: funcion_NPSH(p, x) - y # Residuo
inicio=r_[0, 0, 0]
ajuste_NPSH, exito_NPSH=optimize.leastsq(residuo_NPSH,inicio,args=(Q, NPSH))
self.CurvaNPSHQ=ajuste_NPSH
def calcularCurvaActual(self):
"""Método que define curvas caracteristica de la bomba a una velocidad de giro y diametro del propulsor diferente de la curva característica original haciendo uso de las leyes de afinidad, perry 10.25 Table 10.7"""
D1=self.kwargs["curvaCaracteristica"][0]
N1=self.kwargs["curvaCaracteristica"][1]
D2=self.kwargs["diametro"]
N2=self.kwargs["velocidad"]
Q1=r_[self.kwargs["curvaCaracteristica"][2]]
h1=r_[self.kwargs["curvaCaracteristica"][3]]
Pot1=r_[self.kwargs["curvaCaracteristica"][4]]
npsh1=r_[self.kwargs["curvaCaracteristica"][5]]
Q2=Q1*D2/D1*N2/N1
h2=h1*N2**2/N1**2*D2**2/D1**2
Pot2=Pot1*N2**3/N1**3*D2**3/D1**3
npsh2=npsh1*N2**2/N1**2*D2**2/D1**2 #Esta relación no es tan fiable como las anteriores
return [D2, N2, Q2, h2, Pot2, npsh2]
def coste(self):
HP=self.power.hp
LnHP = log(self.power.hp)
#Coste Bomba
if self.kwargs["tipo_bomba"]==0: #Centrifugal pumps
QH=log(self.Q*self.power.hp**0.5)
Fm=[1., 1.35, 1.15, 2., 2., 3.5, 3.3, 4.95, 4.6, 9.7, 2.95, 1.15, 1.90]
b1=[0., 5.1029, 0.0632, 2.0290, 13.7321, 9.8849][self.kwargs["tipo_centrifuga"]]
b2=[0., -1.2217, 0.2744, -0.2371, -2.8304, -1.6164][self.kwargs["tipo_centrifuga"]]
b3=[0., 0.0771, -0.0253, 0.0102, 0.1542, 0.0834][self.kwargs["tipo_centrifuga"]]
Ft = exp(b1 + b2 * QH + b3 * QH**2)
Cb=Fm[self.kwargs["material"]]*Ft*1.55*exp(8.833-0.6019*QH+0.0519*QH**2)
elif self.kwargs["tipo_bomba"]==1: #Reciprocating pumps
if self.kwargs["material"] == 0: #Case iron
Cb=40.*self.Q**0.81
elif self.kwargs["material"] == 3: #316 Staineless steel
Cb = 410.*self.Q**0.52
elif self.kwargs["material"] == 12: #Bronze
Cb = 410.* 1.4 * self.Q**0.52
elif self.kwargs["material"] == 5: #Nickel
Cb = 410. * 1.86 * self.Q**0.52
elif self.kwargs["material"] == 6: #Monel
Cb = 410. * 2.20 * self.Q**0.52
else: #Material not available. Assume case iron
Cb = 40. *self.Q**0.81
elif self.kwargs["tipo_bomba"]==2: #Gear pumps
Cb=1000*exp(-0.0881+0.1986*log(self.Q)+0.0291*log(self.Q)**2)
elif self.kwargs["tipo_bomba"]==3: #Vertical mixed flow
Cb=0.036*self.Q**0.82*1000
elif self.kwargs["tipo_bomba"]==4: #Vertical axial flow
Cb=0.02*self.Q**0.78*1000
C_bomba=Cb * self.kwargs["Current_index"] / self.kwargs["Base_index"]
#Coste motor
if self.kwargs["motor"] == 0: #Open, drip-proof
if self.kwargs["rpm"] == 0 and HP <= 7.5:
a1, a2, a3 = 4.8314, 0.0966, 0.10960
elif self.kwargs["rpm"] == 0 and 7.5< HP <= 250.:
a1, a2, a3 = 4.1514, 0.5347, 0.05252
elif self.kwargs["rpm"] == 0 and HP > 250.:
a1, a2, a3 = 4.2432, 1.03251, -0.03595
elif self.kwargs["rpm"] == 1 and HP <= 7.5:
a1, a2, a3 = 4.7075, -0.01511, 0.22888
elif self.kwargs["rpm"] == 1 and 7.5< HP <= 250:
a1, a2, a3 = 4.5212, 0.47242, 0.04820
elif self.kwargs["rpm"] == 1 and HP > 250.:
a1, a2, a3 = 7.4044, -0.06464, 0.05448
elif self.kwargs["rpm"] == 2 and HP <= 7.5:
a1, a2, a3 = 4.9298, 0.30118, 0.12630
elif self.kwargs["rpm"] == 2 and 7.5< HP <= 250:
a1, a2, a3 = 5.0999, 0.35861, 0.06052
elif self.kwargs["rpm"] == 2 and HP > 250.:
a1, a2, a3 = 4.6163, 0.88531, -0.02188
elif self.kwargs["motor"] == 1: #Totally enclosed, fan-cooled
if self.kwargs["rpm"] == 0 and HP <= 7.5:
a1, a2, a3 = 5.1058, 0.03316, 0.15374
elif self.kwargs["rpm"] == 0 and 7.5< HP <= 250.:
a1, a2, a3 = 3.8544, 0.83311, 0.02399
elif self.kwargs["rpm"] == 0 and HP > 250.:
a1, a2, a3 = 5.3182, 1.08470, -0.05695
elif self.kwargs["rpm"] == 1 and HP <= 7.5:
a1, a2, a3 = 4.9687, -0.00930, 0.22616
elif self.kwargs["rpm"] == 1 and HP > 7.5:
a1, a2, a3 = 4.5347, 0.57065, 0.04609
elif self.kwargs["rpm"] == 2 and HP <= 7.5:
a1, a2, a3 = 5.1532, 0.28931, 0.14357
elif self.kwargs["rpm"] == 2 and HP > 7.5:
a1, a2, a3 = 5.3858, 0.31004, 0.07406
elif self.kwargs["motor"] == 2: #Explosion-proof
if self.kwargs["rpm"] == 0 and HP <= 7.5:
a1, a2, a3 = 5.3934, -0.00333, 0.15475
elif self.kwargs["rpm"] == 0 and HP > 7.5:
a1, a2, a3 = 4.4442, 0.60820, 0.05202
elif self.kwargs["rpm"] == 1 and HP <= 7.5:
a1, a2, a3 = 5.2851, 0.00048, 0.19949
elif self.kwargs["rpm"] == 1 and HP > 7.5:
a1, a2, a3 = 4.8178, 0.51086, 0.05293
elif self.kwargs["rpm"] == 2 and HP <= 7.5:
a1, a2, a3 = 5.4166, 0.31216, 0.10573
elif self.kwargs["rpm"] == 2 and HP > 7.5:
a1, a2, a3 = 5.5655, 0.31284, 0.07212
C_motor = 1.2 * exp(a1 + a2 * LnHP + a3 * LnHP**2) * self.kwargs["Current_index"] / self.kwargs["Base_index"]
self.C_bomba=Currency(C_bomba)
self.C_motor=Currency(C_motor)
self.C_adq=Currency(C_bomba+C_motor)
self.C_inst=Currency(self.C_adq*self.kwargs["f_install"])
def propTxt(self):
txt="#---------------"+QApplication.translate("pychemqt", "Calculate properties")+"-----------------#"+os.linesep
txt+="%-25s\t%s" %(QApplication.translate("pychemqt", "Input Pressure"), self.entrada.P.str)+os.linesep
txt+="%-25s\t%s" %(QApplication.translate("pychemqt", "Output Pressure"), self.salida[0].P.str)+os.linesep
txt+="%-25s\t%s" %(QApplication.translate("pychemqt", "Head"), self.headCalculada.str)+os.linesep
txt+="%-25s\t%s" %(QApplication.translate("pychemqt", "Brake horsepower"), self.P_freno.str)+os.linesep
txt+="%-25s\t%s" %(QApplication.translate("pychemqt", "Volumetric Flow"), self.volflow.str)+os.linesep
txt+="%-25s\t%s" %(QApplication.translate("pychemqt", "Power"), self.power.str)+os.linesep
txt+="%-25s\t %0.4f" %(QApplication.translate("pychemqt", "Efficiency"), self.rendimientoCalculado)+os.linesep
txt+="%-25s\t %0.4f" %("Cp/Cv", self.entrada.Liquido.cp_cv)+os.linesep
if self.statusCoste:
txt+=os.linesep
txt+="#---------------"+QApplication.translate("pychemqt", "Preliminary Cost Estimation")+"-----------------#"+os.linesep
txt+="%-25s\t %0.2f" %(QApplication.translate("pychemqt", "Base index"), self.kwargs["Base_index"])+os.linesep
txt+="%-25s\t %0.2f" %(QApplication.translate("pychemqt", "Current index"), self.kwargs["Current_index"])+os.linesep
txt+="%-25s\t %0.2f" %(QApplication.translate("pychemqt", "Install factor"), self.kwargs["f_install"])+os.linesep
txt+="%-25s\t %s" %(QApplication.translate("pychemqt", "Pump type"), self.TEXT_BOMBA[self.kwargs["tipo_bomba"]])
if self.kwargs["tipo_bomba"]==0:
txt+=", "+self.TEXT_CENTRIFUGA[self.kwargs["tipo_centrifuga"]]+os.linesep
else:
txt+=os.linesep
txt+="%-25s\t %s" %(QApplication.translate("pychemqt", "Material"), self.TEXT_MATERIAL[self.kwargs["material"]])+os.linesep
txt+="%-25s\t%s" %(QApplication.translate("pychemqt", "Pump Cost"), self.C_bomba.str)+os.linesep
txt+="%-25s\t %s, %s" %(QApplication.translate("pychemqt", "Motor type"), self.TEXT_MOTOR[self.kwargs["motor"]], self.TEXT_RPM[self.kwargs["rpm"]])+os.linesep
txt+="%-25s\t%s" %(QApplication.translate("pychemqt", "Motor Cost"), self.C_motor.str)+os.linesep
txt+="%-25s\t%s" %(QApplication.translate("pychemqt", "Purchase Cost"), self.C_adq.str)+os.linesep
txt+="%-25s\t%s" %(QApplication.translate("pychemqt", "Installed Cost"), self.C_inst.str)+os.linesep
return txt
@classmethod
def propertiesEquipment(cls):
list=[(QApplication.translate("pychemqt", "Input Pressure"), "Pin", Pressure),
(QApplication.translate("pychemqt", "Output Pressure"), "PoutCalculada", Pressure),
(QApplication.translate("pychemqt", "Head"), "headCalculada", Length),
(QApplication.translate("pychemqt", "Brake horsepower"), "P_freno", Power),
(QApplication.translate("pychemqt", "Volumetric Flow"), "volflow", VolFlow),
(QApplication.translate("pychemqt", "Power"), "power", Power),
(QApplication.translate("pychemqt", "Efficiency"), "rendimientoCalculado", Dimensionless),
(QApplication.translate("pychemqt", "Pump Type"), ("TEXT_BOMBA", "tipo_bomba"), str),
(QApplication.translate("pychemqt", "Centrifuge Type"), ("TEXT_CENTRIFUGA", "tipo_centrifuga"), str),
(QApplication.translate("pychemqt", "Material"), ("TEXT_MATERIAL", "material"), str),
(QApplication.translate("pychemqt", "Motor Type"), ("TEXT_MOTOR", "motor"), str),
(QApplication.translate("pychemqt", "Motor RPM"), ("TEXT_RPM", "rpm"), str),
(QApplication.translate("pychemqt", "Pump Cost"), "C_bomba", Currency),
(QApplication.translate("pychemqt", "Motor Cost"), "C_motor", Currency),
(QApplication.translate("pychemqt", "Purchase Cost"), "C_adq", Currency),
(QApplication.translate("pychemqt", "Installed Cost"), "C_inst", Currency)]
return list
def datamap2xls(self):
datamap=(("PoutCalculada", "value", "H15"),
("PoutCalculada", "unit", "I15"),
("Pin", "value", "H16"),
("Pin", "unit", "I16"), )
return datamap
def export2pdf(self):
bomba=pdf("Bomba")
bomba.bomba(self)
bomba.dibujar()
os.system("evince datasheet.pdf")
def export2xls(self):
font0 = xlwt.Font()
font0.bold = True
font0.height = 300
print font0.height
style0 = xlwt.XFStyle()
style0.font = font0
style1 = xlwt.XFStyle()
style1.num_format_str = 'D-MMM-YY'
wb = xlwt.Workbook()
ws = wb.add_sheet('A Test Sheet')
ws.write(0, 0, 'Test', style0)
ws.write(2, 0, 1)
ws.write(2, 1, 1)
ws.write(2, 2, xlwt.Formula("A3+B3"))
wb.save('datasheet.xls')
os.system("gnumeric datasheet.xls")
# project.setInput(2, fria)
# Cambiador(modo=1,
# DiTube=0.0525, DeTube=0.0603, DeeTube=0.0779, kTube=54, rTube=0.0459994e-3,
# annulliFouling= 0.000352, tubeFouling=0.000176, LTube=2.5)
# project.setItem(1, Cambiador)
# print project.getOutput(1), project.getStream(2)
# eq=project.getItem(1)
# print eq.kwargs
# print eq.status, eq.msg
# print "Project has cycle: ", project.hasCycle()
# bomba(entrada=entrada, rendimiento=0.75, deltaP=2)
#
# items={"i1": entrada, "e1": bomba}
# streams=[("i1", "e1", 0, 0), ("e1", "o1", 0, 0)]
#
# project=Project(items=items, streams=streams)
# project.printer()
# print dir(gv)
# print gv.nextin(project.graph)
project = Project()
project.addItem("i1", Corriente())
project.addItem("i2", Corriente())
mezclador = Mixer()
project.addItem("e1", mezclador)
project.addStream(1, "i1", "e1", ind_down=0)
project.addStream(2, "i2", "e1", ind_down=1)
project.addItem("o1", Corriente())
project.addStream(3, "e1", "o1")
# NHPS=r_[0]*9
# bomba(entrada=agua, usarCurva=1, calculo=1, DeltaP=DeltaP.atm, curvaCaracteristica=[3.5, 1500, Q, h, Pot, NHPS])
## print bomba.head, "m"
## print bomba.entrada.caudal_volumetrico.m3h, "m3h"
## print bomba.rendimiento*100, "%"
## print bomba.power.hp, "HP, ", bomba.power.kW, "kW"
## print bomba.salida.P.atm, "atm"
## print agua.caudal_volumetrico.m3h, bomba.entrada.caudal_volumetrico.m3h
# bomba.coste(2.8, 421.2, 600)
## print bomba.C_bomba, bomba.C_motor, bomba.C_adq, bomba.C_inst
## print bomba.C_inst
# bomba.export2xls()
agua = Corriente(T=275,
P=101325.,
ids=[62],
caudalMasico=1,
fraccionMolar=[1.])
bomba = Pump(entrada=agua,
rendimiento=0.75,
deltaP=20 * 101325,
tipo_bomba=1)
# print bomba.power.hp
# print bomba.C_inst
# print bool(bomba)
# bomba.clear()
# print bomba.__dict__
# print bool(bomba)
# bomba=Pump()
# print bomba.__class__
lyt_Calc.addWidget(QtWidgets.QLabel(QtWidgets.QApplication.translate(
"pychemqt", "T bubble point")), 6, 1)
self.Bubble = Entrada_con_unidades(Temperature)
self.Bubble.valueChanged.connect(partial(self.changeParams, "Bubble"))
lyt_Calc.addWidget(self.Bubble, 6, 2)
lyt_Calc.addItem(QtWidgets.QSpacerItem(
20, 20, QtWidgets.QSizePolicy.Expanding,
QtWidgets.QSizePolicy.Expanding), 10, 1, 1, 6)
self.criterio_Changed(0)
if equipment:
self.setEquipment(equipment)
def criterio_Changed(self, int):
self.Pout.setEnabled(int == 1)
self.DeltaP.setEnabled(int == 1)
self.Dew.setEnabled(int == 1)
self.Bubble.setEnabled(int == 1)
self.calculo(off=int)
if __name__ == "__main__":
import sys
from lib.corriente import Corriente
app = QtWidgets.QApplication(sys.argv)
agua = Corriente(T=300, P=101325, caudalMasico=1, fraccionMasica=[1.])
valvula = Valve(entrada=agua, off=1, DeltaP=1000)
dialogo = UI_equipment(valvula)
dialogo.show()
sys.exit(app.exec_())
list = [(QApplication.translate("pychemqt", "Output Temperature"),
"outT", unidades.Temperature),
(QApplication.translate("pychemqt", "Output Pressure"), "outP",
unidades.Pressure),
(QApplication.translate("pychemqt", "Output vapor fraction"),
"outX", unidades.Dimensionless),
(QApplication.translate("pychemqt", "Working Condition"),
("TEXT_WORKING", "off"), str)]
return list
if __name__ == '__main__':
# import doctest
# doctest.testmod()
agua = Corriente(T=300, P=101325, caudalMasico=1, fraccionMasica=[1.])
# agua2=Corriente(T=300, P=101325*2, caudalMasico=2, fraccionMasica=[1.])
mezclador = Mixer(entrada=[agua, Corriente()], criterio=0)
# print mezclador.status, mezclador.msg
print mezclador.salida[0].kwargs
# print mezclador.salida[0].caudalmasico,
# agua3=Corriente(T=300, P=101325, caudalMasico=4, fraccionMasica=[1., 0, 0, 0])
# mezclador(id_entrada=2, entrada=agua3)
# print mezclador.salida[0].caudalmasico
# agua=Corriente(T=300, P=101325, caudalMasico=1, fraccionMolar=[0.3, 0.2, 0.25, 0.25])
# divisor=Divider(entrada=agua, salidas=3)
# divisor(split=[0.3, 0.45, 0.25])
# print divisor.status, divisor.kwargs["salidas"], divisor.msg
#
# agua=Corriente(T=300, P=101325, caudalMasico=1, fraccionMasica=[1., 0, 0, 0])
