def test_ospf_redistribution_tc6_p0(request):
"""Test OSPF inter area route calculations."""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
# Don't run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
global topo
step("Bring up the base config.")
reset_config_on_routers(tgen)
step("Verify that OSPF neighbors are FULL.")
ospf_covergence = verify_ospf_neighbor(tgen, topo)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
step("verify intra area route is calculated for r0-r3 interface ip in R1")
ip = topo["routers"]["r0"]["links"]["r3"]["ipv4"]
ip_net = str(ipaddress.ip_interface(u"{}".format(ip)).network)
nh = topo["routers"]["r0"]["links"]["r1"]["ipv4"].split("/")[0]
input_dict = {
"r1": {
"static_routes": [{
"network": ip_net,
"no_of_ip": 1,
"routeType": "N"
}]
}
}
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Delete the ip address on newly configured loopback of R0")
topo1 = {
"r0": {
"links": {
"r3": {
"ipv4": topo["routers"]["r0"]["links"]["r3"]["ipv4"],
"interface":
topo["routers"]["r0"]["links"]["r3"]["interface"],
"delete": True,
}
}
}
}
result = create_interfaces_cfg(tgen, topo1)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
dut = "r1"
for num in range(0, nretry):
result = verify_ospf_rib(tgen,
dut,
input_dict,
next_hop=nh,
expected=False)
if result is not True:
break
assert result is not True, (
"Testcase {} : Failed \n "
"r1: OSPF routes are present after deleting ip address of newly "
"configured loopback of R0 \n Error: {}".format(tc_name, result))
protocol = "ospf"
result = verify_rib(
tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh,
expected=False,
)
assert result is not True, (
"Testcase {} : Failed \n "
"r1: OSPF routes are present in fib after deleting ip address of newly "
"configured loopback of R0 \n Error: {}".format(tc_name, result))
step("Add back the deleted ip address on newly configured interface of R0")
topo1 = {
"r0": {
"links": {
"r3": {
"ipv4": topo["routers"]["r0"]["links"]["r3"]["ipv4"],
"interface":
topo["routers"]["r0"]["links"]["r3"]["interface"],
}
}
}
}
result = create_interfaces_cfg(tgen, topo1)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Shut no shut interface on R0")
dut = "r0"
intf = topo["routers"]["r0"]["links"]["r3"]["interface"]
shutdown_bringup_interface(tgen, dut, intf, False)
step("un shut the OSPF interface on R0")
dut = "r0"
shutdown_bringup_interface(tgen, dut, intf, True)
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_routemaps_functionality_tc24_p0(request):
"""
OSPF Route map - Multiple set clauses.
Verify OSPF route map support functionality when we
add/remove route-maps with multiple match clauses and without
any set statement.(Match only)
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
global topo
step("Bring up the base config as per the topology")
reset_config_on_routers(tgen)
step("Create static routes(10.0.20.1/32) in R1 and redistribute to "
"OSPF using route map.")
# Create Static routes
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 1,
"next_hop": "Null0",
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
ospf_red_r0 = {
"r0": {
"ospf": {
"redistribute": [{
"redist_type": "static",
"route_map": "rmap_ipv4"
}]
}
}
}
result = create_router_ospf(tgen, topo, ospf_red_r0)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
# Create ip prefix list
pfx_list = {
"r0": {
"prefix_lists": {
"ipv4": {
"pf_list_1_ipv4": [{
"seqid": 10,
"network": "any",
"action": "permit"
}]
}
}
}
}
result = create_prefix_lists(tgen, pfx_list)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("verify that prefix-list is created in R0.")
result = verify_prefix_lists(tgen, pfx_list)
assert result is not True, ("Testcase {} : Failed \n Prefix list not "
"present. Error: {}".format(tc_name, result))
# Create route map
routemaps = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "permit",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
}]
}
}
}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that metric falls back to original metric for ospf routes.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Create static routes(10.0.20.1/32) in R1 and redistribute to "
"OSPF using route map.")
# Create Static routes
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][1],
"no_of_ip": 1,
"next_hop": "Null0",
"tag": 1000,
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
# Create ip prefix list
pfx_list = {
"r0": {
"prefix_lists": {
"ipv4": {
"pf_list_1_ipv4": [{
"seqid": 10,
"network": "any",
"action": "permit"
}]
}
}
}
}
result = create_prefix_lists(tgen, pfx_list)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("verify that prefix-list is created in R0.")
result = verify_prefix_lists(tgen, pfx_list)
assert result is not True, ("Testcase {} : Failed \n Prefix list not "
"present. Error: {}".format(tc_name, result))
# Create route map
routemaps = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "permit",
"match": {
"ipv4": {
"tag": "1000"
}
}
}]
}
}
}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that metric falls back to original metric for ospf routes.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Delete the match clause with tag in route map")
# Create route map
routemaps = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "permit",
"match": {
"ipv4": {
"tag": "1000",
"delete": True
}
},
}]
}
}
}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that metric falls back to original metric for ospf routes.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Delete the match clause with metric in route map.")
# Create route map
routemaps = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "permit",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
}]
}
}
}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_show_p1(request):
"""Verify ospf show commands with json output."""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
# Don't run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
global topo
step(" Bring up the base config as per the topology")
reset_config_on_routers(tgen)
ospf_covergence = verify_ospf_neighbor(tgen, topo)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
dut = "r1"
input_dict = {
"r1": {
"links": {
"r0": {
"ospf": {
"ifUp": True,
"ifFlags": "<UP,BROADCAST,RUNNING,MULTICAST>",
"ospfEnabled": True,
"ipAddressPrefixlen": 24,
"ospfIfType": "Broadcast",
"area": "0.0.0.0",
"networkType": "BROADCAST",
"cost": 10,
"transmitDelaySecs": 1,
"state": "DR",
"priority": 1,
"mcastMemberOspfAllRouters": True,
"timerMsecs": 1000,
"timerDeadSecs": 4,
"timerWaitSecs": 4,
"timerRetransmitSecs": 5,
"nbrCount": 1,
"nbrAdjacentCount": 1,
}
}
}
}
}
result = verify_ospf_interface(tgen, topo, dut=dut, input_dict=input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
# show ip ospf route
ip = topo["routers"]["r0"]["links"]["r3"]["ipv4"]
ip_net = str(ipaddress.ip_interface(u"{}".format(ip)).network)
nh = topo["routers"]["r0"]["links"]["r1"]["ipv4"].split("/")[0]
input_dict = {
"r1": {
"static_routes": [{
"network": ip_net,
"no_of_ip": 1,
"routeType": "N"
}]
}
}
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_learning_tc15_p0(request):
"""Verify OSPF can learn different types of LSA and processes them.
OSPF Learning : Edge learning different types of LSAs.
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
# Don't run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
global topo
step("Bring up the base config as per the topology")
step("Configure area 1 as NSSA Area")
reset_config_on_routers(tgen)
step("Verify that Type 3 summary LSA is originated for the same Area 0")
ip = topo["routers"]["r1"]["links"]["r3-link0"]["ipv4"]
ip_net = str(ipaddress.ip_interface(u"{}".format(ip)).network)
dut = "r0"
input_dict = {
"r1": {
"static_routes": [{
"network": ip_net,
"no_of_ip": 1,
"routeType": "N IA"
}]
}
}
dut = "r0"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
input_dict = {
"r2": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0"
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Redistribute static route in R2 ospf.")
dut = "r2"
redistribute_ospf(tgen, topo, dut, "static")
step("Verify that Type 5 LSA is originated by R2.")
dut = "r0"
protocol = "ospf"
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that R0 receives Type 4 summary LSA.")
dut = "r0"
input_dict = {
"r1": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 1,
"routeType": "N E2"
}]
}
}
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
ospf_covergence = verify_ospf_neighbor(tgen, topo)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
step("Change area 1 as non nssa area (on the fly changing area"
" type on DUT).")
for rtr in ["r1", "r2", "r3"]:
input_dict = {
rtr: {
"ospf": {
"area": [{
"id": "0.0.0.2",
"type": "nssa",
"delete": True
}]
}
}
}
result = create_router_ospf(tgen, topo, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that OSPF neighbours are reset after changing area type.")
step("Verify that ABR R2 originates type 5 LSA in area 1.")
step("Verify that route is calculated and installed in R1.")
input_dict = {
"r1": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 1,
"routeType": "N E2"
}]
}
}
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_routemaps_functionality_tc20_p0(request):
"""
OSPF route map support functionality.
Verify OSPF route map support functionality when route map is not
configured at system level but configured in OSPF
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
global topo
step("Bring up the base config as per the topology")
reset_config_on_routers(tgen)
step("Create static routes(10.0.20.1/32 and 10.0.20.2/32) in R0")
# Create Static routes
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0",
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Redistribute to ospf using route map ( non existent route map)")
ospf_red_r1 = {
"r0": {
"ospf": {
"redistribute": [{
"redist_type": "static",
"route_map": "rmap_ipv4"
}]
}
}
}
result = create_router_ospf(tgen, topo, ospf_red_r1)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that routes are not allowed in OSPF even tough no "
"matching routing map is configured.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict, attempts=2, expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
attempts=2,
expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("configure the route map with the same name that is used "
"in the ospf with deny rule.")
# Create route map
routemaps = {"r0": {"route_maps": {"rmap_ipv4": [{"action": "deny"}]}}}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("verify that now route map is activated & routes are denied in OSPF.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict, expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
# Create route map
routemaps = {"r0": {"route_maps": {"rmap_ipv4": [{"action": "deny"}]}}}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("verify that now route map is activated & routes are denied in OSPF.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict, expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Delete the route map.")
# Create route map
routemaps = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "deny",
"delete": True
}]
}
}
}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that routes are allowed in OSPF even tough "
"no matching routing map is configured.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict, expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_type5_summary_tc44_p0(request):
"""OSPF summarisation with type7 LSAs"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
# Don't run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
step("Bring up the base config as per the topology")
step("Configure area 1 as NSSA Area")
reset_config_on_routers(tgen)
dut = "r0"
protocol = "ospf"
red_static(dut)
input_dict_static_rtes = {
"r0": {
"static_routes": [
{
"network": NETWORK["ipv4"],
"next_hop": "blackhole"
},
{
"network": NETWORK2["ipv4"],
"next_hop": "blackhole"
},
]
}
}
result = create_static_routes(tgen, input_dict_static_rtes)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that routes are learnt on R1.")
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict_static_rtes)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict_static_rtes,
protocol=protocol)
assert (
result is True
), "Testcase {} : Failed" "Error: Routes is missing in RIB".format(tc_name)
step("Configure External Route summary in R0 to summarise 5"
" routes to one route.")
ospf_summ_r0 = {
"r0": {
"ospf": {
"summary-address": [{
"prefix": SUMMARY["ipv4"][0].split("/")[0],
"mask": "8"
}]
}
}
}
result = create_router_ospf(tgen, topo, ospf_summ_r0)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that external routes are summarised to configured summary "
"address on R0 after 5 secs of delay timer expiry and only one "
"route is sent to R1.")
step("Configure summary & redistribute static/connected route with "
"metric type 2")
input_dict_summary = {
"r0": {
"static_routes": [{
"network": SUMMARY["ipv4"][3]
}]
}
}
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict_summary)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict_summary,
protocol=protocol)
assert (
result is True
), "Testcase {} : Failed" "Error: Routes is missing in RIB".format(tc_name)
step("Verify that show ip ospf summary should show the summaries.")
input_dict = {
SUMMARY["ipv4"][3]: {
"Summary address": SUMMARY["ipv4"][3],
"Metric-type": "E2",
"Metric": 20,
"Tag": 0,
"External route count": 5,
}
}
dut = "r0"
result = verify_ospf_summary(tgen, topo, dut, input_dict)
assert (
result is True
), "Testcase {} : Failed" "Error: Summary missing in OSPF DB".format(
tc_name)
step("Learn type 7 lsa from neighbours")
dut = "r1"
protocol = "ospf"
red_static(dut)
input_dict_static_rtes = {
"r1": {
"static_routes": [{
"network": NETWORK3["ipv4"],
"next_hop": "blackhole"
}]
}
}
result = create_static_routes(tgen, input_dict_static_rtes)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that routes are learnt on R0.")
dut = "r0"
result = verify_ospf_rib(tgen, dut, input_dict_static_rtes)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict_static_rtes,
protocol=protocol)
assert (
result is True
), "Testcase {} : Failed" "Error: Routes is missing in RIB".format(tc_name)
ospf_summ_r0 = {
"r0": {
"ospf": {
"summary-address": [{
"prefix": SUMMARY["ipv4"][2].split("/")[0],
"mask": "8"
}]
}
}
}
result = create_router_ospf(tgen, topo, ospf_summ_r0)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that type7 LSAs received from neighbor are not summarised.")
input_dict = {
"13.0.0.0/8": {
"Summary address": "13.0.0.0/8",
"Metric-type": "E2",
"Metric": 20,
"Tag": 0,
"External route count": 0,
}
}
dut = "r0"
result = verify_ospf_summary(tgen, topo, dut, input_dict)
assert (
result is True
), "Testcase {} : Failed" "Error: Summary missing in OSPF DB".format(
tc_name)
step("Verify that already originated summary is intact.")
input_dict = {
SUMMARY["ipv4"][3]: {
"Summary address": SUMMARY["ipv4"][3],
"Metric-type": "E2",
"Metric": 20,
"Tag": 0,
"External route count": 5,
}
}
dut = "r0"
result = verify_ospf_summary(tgen, topo, dut, input_dict)
assert (
result is True
), "Testcase {} : Failed" "Error: Summary missing in OSPF DB".format(
tc_name)
dut = "r1"
aggr_timer = {"r1": {"ospf": {"aggr_timer": 6}}}
result = create_router_ospf(tgen, topo, aggr_timer)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
ospf_summ_r0 = {
"r0": {
"ospf": {
"summary-address": [{
"prefix": SUMMARY["ipv4"][2].split("/")[0],
"mask": "8"
}]
}
}
}
result = create_router_ospf(tgen, topo, ospf_summ_r0)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("wait for 6+1 seconds as ospf aggregation start after 6 secs as "
"per the above aggr_timer command")
sleep(7)
dut = "r1"
aggr_timer = {"r1": {"ospf": {"del_aggr_timer": 6}}}
result = create_router_ospf(tgen, topo, aggr_timer)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_chaos_tc34_p1(request):
"""
verify ospf functionality when staticd is restarted.
Verify ospf functionalitywhen staticroutes are
redistributed & Staticd is restarted.
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
global topo
step("Bring up the base config as per the topology")
reset_config_on_routers(tgen)
step("Create static routes(10.0.20.1/32) in R1 and redistribute "
"to OSPF using route map.")
# Create Static routes
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0",
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
ospf_red_r0 = {
"r0": {
"ospf": {
"redistribute": [{
"redist_type": "static"
}]
}
}
}
result = create_router_ospf(tgen, topo, ospf_red_r0)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify OSPF neighbors after base config is done.")
# Api call verify whether OSPF is converged
ospf_covergence = verify_ospf_neighbor(tgen, topo)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
step("Verify that route is advertised to R1.")
dut = "r1"
protocol = "ospf"
nh = topo["routers"]["r0"]["links"]["r1"]["ipv4"].split("/")[0]
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Kill staticd daemon on R0.")
kill_router_daemons(tgen, "r0", ["staticd"])
step("Verify that route advertised to R1 are deleted from RIB and FIB.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict, expected=False)
assert (
result is not True
), "Testcase {} : Failed \n " "r1: OSPF routes are present \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
expected=False)
assert (
result is not True
), "Testcase {} : Failed \n " "r1: routes are still present \n Error: {}".format(
tc_name, result)
step("Bring up staticd daemon on R0.")
start_router_daemons(tgen, "r0", ["staticd"])
step("Verify OSPF neighbors are up after bringing back ospfd in R0")
# Api call verify whether OSPF is converged
ospf_covergence = verify_ospf_neighbor(tgen, topo)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
step("All the neighbours are up and routes are installed before the"
" restart. Verify OSPF route table and ip route table.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Kill staticd daemon on R1.")
kill_router_daemons(tgen, "r1", ["staticd"])
step("Bring up staticd daemon on R1.")
start_router_daemons(tgen, "r1", ["staticd"])
step("Verify OSPF neighbors are up after bringing back ospfd in R1")
# Api call verify whether OSPF is converged
ospf_covergence = verify_ospf_neighbor(tgen, topo)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
step("All the neighbours are up and routes are installed before the"
" restart. Verify OSPF route table and ip route table.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_ecmp_tc16_p0(request):
"""
Verify OSPF ECMP.
Verify OSPF ECMP with max path configured as 8 (ECMP
configured at FRR level)
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
# Don't run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
global topo
step("Bring up the base config as per the topology")
step("Configure 8 interfaces between R1 and R2 and enable ospf in area 0.")
reset_config_on_routers(tgen)
step("Verify that OSPF is up with 8 neighborship sessions.")
dut = "r1"
ospf_covergence = verify_ospf_neighbor(tgen, topo, dut=dut)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
step("Configure a static route in R0 and redistribute in OSPF.")
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0",
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
dut = "r0"
red_static(dut)
step("Verify that route in R2 in stalled with 8 next hops.")
nh = []
for item in range(1, 7):
nh.append(
topo["routers"]["r0"]["links"]["r1-link1"]["ipv4"].split("/")[0])
nh2 = topo["routers"]["r0"]["links"]["r1"]["ipv4"].split("/")[0]
nh.append(nh2)
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("shut no shut all the interfaces on the remote router - R2")
dut = "r1"
for intfr in range(1, 7):
intf = topo["routers"]["r1"]["links"]["r0-link{}".format(
intfr)]["interface"]
shutdown_bringup_interface(tgen, dut, intf, False)
result = verify_ospf_rib(tgen,
dut,
input_dict,
next_hop=nh,
expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh,
expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
for intfr in range(1, 7):
intf = topo["routers"]["r1"]["links"]["r0-link{}".format(
intfr)]["interface"]
shutdown_bringup_interface(tgen, dut, intf, True)
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("shut no shut on all the interfaces on DUT (r1)")
for intfr in range(1, 7):
intf = topo["routers"]["r1"]["links"]["r0-link{}".format(
intfr)]["interface"]
shutdown_bringup_interface(tgen, dut, intf, False)
for intfr in range(1, 7):
intf = topo["routers"]["r1"]["links"]["r0-link{}".format(
intfr)]["interface"]
shutdown_bringup_interface(tgen, dut, intf, True)
step("Verify that all the neighbours are up and routes are installed"
" with 8 next hop in ospf and ip route tables on R1.")
step("Verify that OSPF is up with 8 neighborship sessions.")
dut = "r1"
ospf_covergence = verify_ospf_neighbor(tgen, topo, dut=dut)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step(" Un configure static route on R0")
dut = "r0"
red_static(dut, config=False)
# Wait for R0 to flush external LSAs.
sleep(10)
step("Verify that route is withdrawn from R2.")
dut = "r1"
result = verify_ospf_rib(tgen,
dut,
input_dict,
next_hop=nh,
attempts=5,
expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(
tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh,
attempts=5,
expected=False,
)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Re configure the static route in R0.")
dut = "r0"
red_static(dut)
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_ecmp_tc17_p0(request):
"""
Verify OSPF ECMP.
Verify OSPF ECMP with max path configured as 2 (Edge having 2 uplink ports)
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
# Don't run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
global topo
step("Bring up the base config as per the topology")
step("Configure 2 interfaces between R1 and R2 & enable ospf in area 0.")
reset_config_on_routers(tgen)
step("Verify that OSPF is up with 2 neighborship sessions.")
dut = "r1"
ospf_covergence = verify_ospf_neighbor(tgen, topo, dut=dut)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
step("Configure a static route in R0 and redistribute in OSPF.")
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0",
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
dut = "r0"
red_static(dut)
step("Verify that route in R2 in stalled with 2 next hops.")
nh1 = topo["routers"]["r0"]["links"]["r1-link1"]["ipv4"].split("/")[0]
nh2 = topo["routers"]["r0"]["links"]["r1"]["ipv4"].split("/")[0]
nh = [nh1, nh2]
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step(" Un configure static route on R0")
dut = "r0"
red_static(dut, config=False)
# sleep till the route gets withdrawn
sleep(10)
step("Verify that route is withdrawn from R2.")
dut = "r1"
result = verify_ospf_rib(tgen,
dut,
input_dict,
next_hop=nh,
attempts=5,
expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(
tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh,
attempts=5,
expected=False,
)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Reconfigure the static route in R0.Change ECMP value to 2.")
dut = "r0"
red_static(dut)
step("Configure cost on R0 as 100")
r0_ospf_cost = {"r0": {"links": {"r1": {"ospf": {"cost": 100}}}}}
result = config_ospf_interface(tgen, topo, r0_ospf_cost)
assert result is True, "Testcase {} :Failed \n Error: {}".format(
tc_name, result)
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_routemaps_functionality_tc21_p0(request):
"""
OSPF route map support functionality.
Verify OSPF route map support functionality with set/match clauses
/call/continue/goto in a route-map to see if it takes immediate effect.
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
global topo
step("Bring up the base config as per the topology")
reset_config_on_routers(tgen)
step("Create static routes(10.0.20.1/32) in R1 and redistribute "
"to OSPF using route map.")
# Create Static routes
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0",
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
redistribute_ospf(tgen, topo, "r0", "static", route_map="rmap_ipv4")
# Create route map
routemaps = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "permit",
"seq_id": 10
}]
}
}
}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that route is advertised to R2.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
# Create route map
routemaps = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "permit",
"delete": True,
"seq_id": 10
}]
}
}
}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step(" Configure route map with set clause (set metric)")
# Create route map
routemaps = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "permit",
"set": {
"med": 123
},
"seq_id": 10
}]
}
}
}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that configured metric is applied to ospf routes.")
dut = "r1"
protocol = "ospf"
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Configure route map with match clause (match metric) with "
"some actions(change metric).")
# Create route map
routemaps = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "permit",
"match": {
"med": 123
},
"set": {
"med": 150
},
"seq_id": 10,
}]
}
}
}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Configure route map with call clause")
# Create ip prefix list
input_dict_2 = {
"r0": {
"prefix_lists": {
"ipv4": {
"pf_list_1_ipv4": [{
"seqid": 10,
"network": "any",
"action": "permit"
}]
}
}
}
}
result = create_prefix_lists(tgen, input_dict_2)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
# Create route map
input_dict_3 = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "permit",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
"set": {
"med": 150
},
"call": "rmap_match_pf_2_ipv4",
"seq_id": 10,
}],
"rmap_match_pf_2_ipv4": [{
"action": "permit",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
"set": {
"med": 200
},
"seq_id": 10,
}],
}
}
}
result = create_route_maps(tgen, input_dict_3)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
# Create route map
routemaps = {"r0": {"route_maps": {"rmap_ipv4": [{"delete": True}]}}}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Configure route map with continue clause")
# Create route map
input_dict_3 = {
"r0": {
"route_maps": {
"rmap_ipv4": [
{
"action": "permit",
"seq_id": "10",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
"set": {
"med": 150
},
"continue": "30",
"seq_id": 10,
},
{
"action": "permit",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
"set": {
"med": 100
},
"seq_id": 20,
},
{
"action": "permit",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
"set": {
"med": 50
},
"seq_id": 30,
},
]
}
}
}
result = create_route_maps(tgen, input_dict_3)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Configure route map with goto clause")
# Create route map
input_dict_3 = {
"r0": {
"route_maps": {
"rmap_ipv4": [
{
"action": "permit",
"seq_id": "10",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
"goto": "30",
},
{
"action": "permit",
"seq_id": "20",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
"set": {
"med": 100
},
},
{
"action": "permit",
"seq_id": "30",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
"set": {
"med": 200
},
},
]
}
}
}
result = create_route_maps(tgen, input_dict_3)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_lan_ecmp_tc18_p0(request):
"""
OSPF ECMP.
Verify OSPF ECMP with max path configured as 8
(Edge having 1 uplink port as broadcast network,
connect to 8 TORs - LAN case)
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
# Don't run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
global topo
step("Bring up the base config as per the topology")
step(". Configure ospf in all the routers on LAN interface.")
reset_config_on_routers(tgen)
step("Verify that OSPF is up with 8 neighborship sessions.")
ospf_covergence = verify_ospf_neighbor(tgen, topo, lan=True)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
step("Configure a static route in all the routes and "
"redistribute static/connected in OSPF.")
for rtr in topo["routers"]:
input_dict = {
rtr: {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0"
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
dut = rtr
redistribute_ospf(tgen, topo, dut, "static")
step("Verify that route in R0 in stalled with 8 hops. "
"Verify ospf route table and ip route table.")
nh = []
for rtr in topo["routers"]:
nh.append(topo["routers"][rtr]["links"]["s1"]["ipv4"].split("/")[0])
nh.remove(topo["routers"]["r1"]["links"]["s1"]["ipv4"].split("/")[0])
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step(" clear ip ospf interface on DUT(r0)")
clear_ospf(tgen, "r0")
step("Verify that after clearing the ospf interface all the "
"neighbours are up and routes are installed with 8 next hop "
"in ospf and ip route tables on R0")
dut = "r0"
ospf_covergence = verify_ospf_neighbor(tgen, topo, dut=dut, lan=True)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
step(" clear ip ospf interface on R2")
clear_ospf(tgen, "r2")
dut = "r2"
ospf_covergence = verify_ospf_neighbor(tgen, topo, dut=dut, lan=True)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
step("Delete static/connected cmd in ospf in all the routes one by one.")
for rtr in topo["routers"]:
input_dict = {
rtr: {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0",
"delete": True,
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that all the routes are withdrawn from R0")
dut = "r1"
result = verify_ospf_rib(tgen,
dut,
input_dict,
next_hop=nh,
retry_timeout=10,
expected=False)
assert (
result is not True
), "Testcase {} : Failed \n " "r1: OSPF routes are present \n Error: {}".format(
tc_name, result)
protocol = "ospf"
result = verify_rib(
tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh,
retry_timeout=10,
expected=False,
)
assert (
result is not True
), "Testcase {} : Failed \n " "r1: routes are still present \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_routemaps_functionality_tc19_p0(request):
"""
OSPF Route map - Verify OSPF route map support functionality.
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
global topo
step("Bring up the base config as per the topology")
reset_config_on_routers(tgen)
step("Create static routes(10.0.20.1/32 and 10.0.20.2/32) in R0")
# Create Static routes
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0",
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
redistribute_ospf(tgen, topo, "r0", "static")
dut = "r1"
lsid = NETWORK["ipv4"][0].split("/")[0]
rid = routerids[0]
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
redistribute_ospf(tgen, topo, "r0", "static", delete=True)
step("Create prefix-list in R0 to permit 10.0.20.1/32 prefix &"
" deny 10.0.20.2/32")
# Create ip prefix list
pfx_list = {
"r0": {
"prefix_lists": {
"ipv4": {
"pf_list_1_ipv4": [
{
"seqid": 10,
"network": NETWORK["ipv4"][0],
"action": "permit",
},
{
"seqid": 11,
"network": "any",
"action": "deny"
},
]
}
}
}
}
result = create_prefix_lists(tgen, pfx_list)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
# Create route map
routemaps = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "permit",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
}]
}
}
}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Configure route map rmap1 and redistribute static routes to"
" ospf using route map rmap1")
redistribute_ospf(tgen, topo, "r0", "static", route_map="rmap_ipv4")
step("Change prefix rules to permit 10.0.20.2 and deny 10.0.20.1")
# Create ip prefix list
pfx_list = {
"r0": {
"prefix_lists": {
"ipv4": {
"pf_list_1_ipv4": [
{
"seqid": 10,
"network": NETWORK["ipv4"][1],
"action": "permit",
},
{
"seqid": 11,
"network": "any",
"action": "deny"
},
]
}
}
}
}
result = create_prefix_lists(tgen, pfx_list)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that route 10.0.20.2 is allowed and 10.0.20.1 is denied.")
dut = "r1"
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][1],
"no_of_ip": 1,
"next_hop": "Null0"
}]
}
}
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 1,
"next_hop": "Null0"
}]
}
}
result = verify_ospf_rib(tgen, dut, input_dict, expected=False)
assert result is not True, (
"Testcase {} : Failed \n "
"r1: OSPF routes are present \n Error: {}".format(tc_name, result))
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
expected=False)
assert result is not True, (
"Testcase {} : Failed \n "
"r1: routes are present in fib \n Error: {}".format(tc_name, result))
step("Delete and reconfigure prefix list.")
# Create ip prefix list
pfx_list = {
"r0": {
"prefix_lists": {
"ipv4": {
"pf_list_1_ipv4": [
{
"seqid": 10,
"network": NETWORK["ipv4"][1],
"action": "permit",
"delete": True,
},
{
"seqid": 11,
"network": "any",
"action": "deny",
"delete": True,
},
]
}
}
}
}
result = create_prefix_lists(tgen, pfx_list)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_prefix_lists(tgen, pfx_list)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0"
}]
}
}
result = verify_ospf_rib(tgen, dut, input_dict, expected=False)
assert result is not True, (
"Testcase {} : Failed \n "
"r1: OSPF routes are present \n Error: {}".format(tc_name, result))
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
expected=False)
assert result is not True, (
"Testcase {} : Failed \n "
"r1: OSPF routes are present \n Error: {}".format(tc_name, result))
pfx_list = {
"r0": {
"prefix_lists": {
"ipv4": {
"pf_list_1_ipv4": [
{
"seqid": 10,
"network": NETWORK["ipv4"][1],
"action": "permit",
},
{
"seqid": 11,
"network": "any",
"action": "deny"
},
]
}
}
}
}
result = create_prefix_lists(tgen, pfx_list)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that route 10.0.20.2 is allowed and 10.0.20.1 is denied.")
dut = "r1"
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][1],
"no_of_ip": 1,
"next_hop": "Null0"
}]
}
}
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 1,
"next_hop": "Null0"
}]
}
}
result = verify_ospf_rib(tgen, dut, input_dict, expected=False)
assert result is not True, (
"Testcase {} : Failed \n "
"r1: OSPF routes are present \n Error: {}".format(tc_name, result))
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
expected=False)
assert result is not True, (
"Testcase {} : Failed \n "
"r1: routes are still present \n Error: {}".format(tc_name, result))
write_test_footer(tc_name)
def test_ospf_chaos_tc32_p1(request):
"""Verify ospf functionality after restart FRR service. """
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
global topo
step("Bring up the base config as per the topology")
reset_config_on_routers(tgen)
step("Create static routes(10.0.20.1/32) in R1 and redistribute "
"to OSPF using route map.")
# Create Static routes
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK['ipv4'][0],
"no_of_ip": 5,
"next_hop": 'Null0',
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
ospf_red_r0 = {
"r0": {
"ospf": {
"redistribute": [{
"redist_type": "static"
}]
}
}
}
result = create_router_ospf(tgen, topo, ospf_red_r0)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify OSPF neighbors after base config is done.")
# Api call verify whether OSPF is converged
ospf_covergence = verify_ospf_neighbor(tgen, topo)
assert ospf_covergence is True, ("setup_module :Failed \n Error:"
" {}".format(ospf_covergence))
step("Verify that route is advertised to R1.")
dut = 'r1'
protocol = 'ospf'
nh = topo['routers']['r0']['links']['r1']['ipv4'].split('/')[0]
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Restart frr on R0")
stop_router(tgen, 'r0')
start_router(tgen, 'r0')
step("Verify OSPF neighbors are up after restarting R0")
# Api call verify whether OSPF is converged
ospf_covergence = verify_ospf_neighbor(tgen, topo)
assert ospf_covergence is True, ("setup_module :Failed \n Error:"
" {}".format(ospf_covergence))
step("All the neighbours are up and routes are installed before the"
" restart. Verify OSPF route table and ip route table.")
dut = 'r1'
protocol = 'ospf'
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Restart frr on R1")
stop_router(tgen, 'r1')
start_router(tgen, 'r1')
step("Verify OSPF neighbors are up after restarting R1")
# Api call verify whether OSPF is converged
ospf_covergence = verify_ospf_neighbor(tgen, topo)
assert ospf_covergence is True, ("setup_module :Failed \n Error:"
" {}".format(ospf_covergence))
step("All the neighbours are up and routes are installed before the"
" restart. Verify OSPF route table and ip route table.")
dut = 'r1'
protocol = 'ospf'
result = verify_ospf_rib(tgen, dut, input_dict, next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
next_hop=nh)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_rfc2328_appendinxE_p0(request):
"""
Test OSPF appendinx E RFC2328.
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
global topo
step("Bring up the base config.")
reset_config_on_routers(tgen)
step("Verify that OSPF neighbours are Full.")
# Api call verify whether OSPF is converged
ospf_covergence = verify_ospf_neighbor(tgen, topo)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence
)
redistribute_ospf(tgen, topo, "r0", "static")
step("Configure static route with prefix 24, 16, 8 to check ")
input_dict = {
"r0": {
"static_routes": [
{
"network": NETWORK_APP_E["ipv4"][0],
"no_of_ip": 1,
"next_hop": "Null0",
}
]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
input_dict = {
"r0": {
"static_routes": [
{
"network": NETWORK_APP_E["ipv4"][1],
"no_of_ip": 1,
"next_hop": "Null0",
}
]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
input_dict = {
"r0": {
"static_routes": [
{
"network": NETWORK_APP_E["ipv4"][2],
"no_of_ip": 1,
"next_hop": "Null0",
}
]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
step("Verify that ospf originates routes with mask 24, 16, 8")
ip_net = NETWORK_APP_E["ipv4"][0]
input_dict = {"r1": {"static_routes": [{"network": ip_net, "no_of_ip": 1}]}}
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
protocol = "ospf"
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
ip_net = NETWORK_APP_E["ipv4"][1]
input_dict = {"r1": {"static_routes": [{"network": ip_net, "no_of_ip": 1}]}}
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
protocol = "ospf"
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
ip_net = NETWORK_APP_E["ipv4"][2]
input_dict = {"r1": {"static_routes": [{"network": ip_net, "no_of_ip": 1}]}}
dut = "r1"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
protocol = "ospf"
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
step("Delete static route with prefix 24, 16, 8 to check ")
input_dict = {
"r0": {
"static_routes": [
{
"network": NETWORK_APP_E["ipv4"][0],
"no_of_ip": 1,
"next_hop": "Null0",
"delete": True,
}
]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
input_dict = {
"r0": {
"static_routes": [
{
"network": NETWORK_APP_E["ipv4"][1],
"no_of_ip": 1,
"next_hop": "Null0",
"delete": True,
}
]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
input_dict = {
"r0": {
"static_routes": [
{
"network": NETWORK_APP_E["ipv4"][2],
"no_of_ip": 1,
"next_hop": "Null0",
"delete": True,
}
]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(tc_name, result)
write_test_footer(tc_name)
def test_ospf_routemaps_functionality_tc22_p0(request):
"""
OSPF Route map - Multiple sequence numbers.
Verify OSPF route map support functionality with multiple sequence
numbers in a single route-map for different match/set clauses.
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
global topo
step("Bring up the base config as per the topology")
reset_config_on_routers(tgen)
step("Configure route map with seq number 10 to with ip prefix"
" permitting route 10.0.20.1/32 in R1")
step("Configure route map with seq number 20 to with ip prefix"
" permitting route 10.0.20.2/32 in R1")
# Create route map
input_dict_3 = {
"r0": {
"route_maps": {
"rmap_ipv4": [
{
"action": "permit",
"seq_id": "10",
"match": {
"ipv4": {
"prefix_lists": "pf_list_1_ipv4"
}
},
},
{
"action": "permit",
"seq_id": "20",
"match": {
"ipv4": {
"prefix_lists": "pf_list_2_ipv4"
}
},
},
]
}
}
}
result = create_route_maps(tgen, input_dict_3)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
# Create ip prefix list
input_dict_2 = {
"r0": {
"prefix_lists": {
"ipv4": {
"pf_list_1_ipv4": [{
"seqid": 10,
"network": NETWORK["ipv4"][0],
"action": "permit"
}]
}
}
}
}
result = create_prefix_lists(tgen, input_dict_2)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
# Create ip prefix list
input_dict_2 = {
"r0": {
"prefix_lists": {
"ipv4": {
"pf_list_2_ipv4": [{
"seqid": 10,
"network": NETWORK["ipv4"][1],
"action": "permit"
}]
}
}
}
}
result = create_prefix_lists(tgen, input_dict_2)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Configure static routes 10.0.20.1/32 and 10.0.20.2 in R1")
# Create Static routes
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0",
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Configure redistribute static route with route map.")
ospf_red_r0 = {
"r0": {
"ospf": {
"redistribute": [{
"redist_type": "static",
"route_map": "rmap_ipv4"
}]
}
}
}
result = create_router_ospf(tgen, topo, ospf_red_r0)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 2,
"next_hop": "Null0",
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that both routes are learned in R1 and R2")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
dut = "r2"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Change route map with seq number 20 to deny.")
# Create route map
input_dict_3 = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"action": "deny",
"seq_id": "20",
"match": {
"ipv4": {
"prefix_lists": "pf_list_2_ipv4"
}
},
}]
}
}
}
result = create_route_maps(tgen, input_dict_3)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify the route 10.0.20.2/32 is withdrawn and not present "
"in the routing table of R0 and R1.")
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][1],
"next_hop": "Null0"
}]
}
}
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict, expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
dut = "r2"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict, expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
def test_ospf_routemaps_functionality_tc25_p0(request):
"""
OSPF route map support functionality.
Verify OSPF route map support functionality
when route map actions are toggled.
"""
tc_name = request.node.name
write_test_header(tc_name)
tgen = get_topogen()
global topo
step("Bring up the base config as per the topology")
reset_config_on_routers(tgen)
step("Create static routes(10.0.20.1/32) in R1 and redistribute "
"to OSPF using route map.")
# Create Static routes
input_dict = {
"r0": {
"static_routes": [{
"network": NETWORK["ipv4"][0],
"no_of_ip": 5,
"next_hop": "Null0",
}]
}
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
ospf_red_r0 = {
"r0": {
"ospf": {
"redistribute": [{
"redist_type": "static",
"route_map": "rmap_ipv4"
}]
}
}
}
result = create_router_ospf(tgen, topo, ospf_red_r0)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Configure route map with permit rule")
# Create route map
routemaps = {"r0": {"route_maps": {"rmap_ipv4": [{"action": "permit"}]}}}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Verify that route is advertised to R1.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen, "ipv4", dut, input_dict, protocol=protocol)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
step("Configure route map with deny rule")
# Create route map
routemaps = {
"r0": {
"route_maps": {
"rmap_ipv4": [{
"seq_id": 10,
"action": "deny"
}]
}
}
}
result = create_route_maps(tgen, routemaps)
assert result is True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
# Api call verify whether OSPF is converged
ospf_covergence = verify_ospf_neighbor(tgen, topo)
assert ospf_covergence is True, "setup_module :Failed \n Error:" " {}".format(
ospf_covergence)
step("Verify that route is not advertised to R1.")
dut = "r1"
protocol = "ospf"
result = verify_ospf_rib(tgen, dut, input_dict, expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
result = verify_rib(tgen,
"ipv4",
dut,
input_dict,
protocol=protocol,
expected=False)
assert result is not True, "Testcase {} : Failed \n Error: {}".format(
tc_name, result)
write_test_footer(tc_name)
