def main(ldata, pdata, rdata, tdata, gwid):
#this is common code to process packet information provided by the main gateway script (i.e. post_processing_gw.py)
#these information are provided in case you need them
arr = map(int, pdata.split(','))
dst = arr[0]
ptype = arr[1]
src = arr[2]
seq = arr[3]
datalen = arr[4]
SNR = arr[5]
RSSI = arr[6]
arr = map(int, rdata.split(','))
bw = arr[0]
cr = arr[1]
sf = arr[2]
if (str(src) in key_SMS.source_list) or (len(key_SMS.source_list) == 0):
#this part depends on the syntax used by the end-device
#we use: thingspeak_channel#thingspeak_field#TC/22.4/HU/85...
#ex: ##TC/22.4/HU/85... or TC/22.4/HU/85... or thingspeak_channel##TC/22.4/HU/85...
#or #thingspeak_field#TC/22.4/HU/85... to use some default value
# get number of '#' separator
nsharp = ldata.count('#')
nslash = 0
#will field delimited by '#' in the MongoDB
data = ['', '']
#no separator
if nsharp == 0:
# get number of '/' separator on ldata
nslash = ldata.count('/')
#contains ['', '', "s1", s1value, "s2", s2value, ...]
data_array = data + re.split("/", ldata)
else:
data_array = re.split("#", ldata)
# only 1 separator
if nsharp == 1:
# get number of '/' separator on data_array[1]
nslash = data_array[1].count('/')
# then reconstruct data_array
data_array = data + re.split("/", data_array[1])
# we have 2 separators
if nsharp == 2:
# get number of '/' separator on data_array[2]
nslash = data_array[2].count('/')
# then reconstruct data_array
data_array = data + re.split("/", data_array[2])
#just in case we have an ending CR or 0
data_array[len(data_array) - 1] = data_array[len(data_array) -
1].replace('\n', '')
data_array[len(data_array) - 1] = data_array[len(data_array) -
1].replace('\0', '')
#sms data to be sent
#sms_data = "SensorData Sensor"+str(src)
#sms_data = "SRC#"+str(src)+"#RSSI#"+str(RSSI)+"#BW#"+str(bw)+"#CR#"+str(cr)+"#SF#"+str(sf)+"#GWID#"+gwid+"/"+data
sms_data = "SensorData Sensor" + str(src) + " RSSI " + str(
RSSI) + " BW " + str(bw) + " CR " + str(cr) + " SF " + str(
sf) + " GWID " + gwid
nomenclatures = []
# data to send
data = []
data.append(data_array[0])
data.append(data_array[1])
if nslash == 0:
# old syntax without nomenclature key, so insert only one key
# we use DEF
nomenclatures.append("DEF")
data.append(data_array[2])
else:
# completing nomenclatures and data
i = 2
while i < len(data_array) - 1:
nomenclatures.append(data_array[i])
data.append(data_array[i + 1])
i += 2
#add the nomemclatures and sensed values
i = 0
while i < len(data) - 2:
sms_data += " " + nomenclatures[i] + " " + data[i + 2]
i += 1
# Send data to expected contacts
success = False
if not always_enabled:
if (libSMS.internet_ON()):
print('Internet is available, no need to use the SMS Service')
sys.exit()
else:
print("rcv msg to send via the SMS Service: " + sms_data)
success = libSMS.send_sms(sm, sms_data, key_SMS.contacts)
else:
print("rcv msg to send via the SMS Service: " + sms_data)
success = libSMS.send_sms(sm, sms_data, key_SMS.contacts)
if (success):
print "Sending SMS done"
else:
print "Source is not is source list, not sending with CloudSMS.py"
for cloud in clouds:
if "CloudSMS.py" in cloud["script"]:
try:
always_enabled = cloud["always_enabled"]
except KeyError:
print "always_enabled undefined"
always_enabled = False
try:
gammurc_file = cloud["gammurc_file"]
except KeyError:
print "gammurc_file undefined"
if not always_enabled:
if (libSMS.internet_ON()):
print('Internet is available, no need to use the SMS Service')
sys.exit()
#check Gammu configuration
if (not libSMS.gammuCheck()):
sys.exit()
else:
if (not libSMS.gammurcCheck(gammurc_file)):
sys.exit()
if (libSMS.phoneConnection(gammurc_file, key_SMS.PIN) == None):
sys.exit()
else:
sm = libSMS.phoneConnection(gammurc_file, key_SMS.PIN)
def main(ldata, pdata, rdata, tdata, gwid):
#this is common code to process packet information provided by the main gateway script (i.e. post_processing_gw.py)
#these information are provided in case you need them
arr = map(int, pdata.split(','))
dst = arr[0]
ptype = arr[1]
src = arr[2]
seq = arr[3]
datalen = arr[4]
SNR = arr[5]
RSSI = arr[6]
arr = map(int, rdata.split(','))
bw = arr[0]
cr = arr[1]
sf = arr[2]
if (str(src) in key_Orion.source_list) or (len(key_Orion.source_list)
== 0):
#this part depends on the syntax used by the end-device
#we use: thingspeak_channel#thingspeak_field#TC/22.4/HU/85...
#ex: ##TC/22.4/HU/85... or TC/22.4/HU/85... or thingspeak_channel##TC/22.4/HU/85...
#or #thingspeak_field#TC/22.4/HU/85... to use some default value
# get number of '#' separator
nsharp = ldata.count('#')
nslash = 0
# no separator
if nsharp == 0:
# will use default Fiware-Service and Fiware-ServicePath
data = ['', '']
# get number of '/' separator on ldata
nslash = ldata.count('/')
# contains ['', '', "s1", s1value, "s2", s2value, ...]
data_array = data + re.split("/", ldata)
else:
data_array = re.split("#", ldata)
# only 1 separator
if nsharp == 1:
# insert '' to indicate default Fiware-Service
# as we assume that the only parameter indicate the Fiware-ServicePath
data_array.insert(0, '')
# if the length is greater than 2
if len(data_array[1]) < 3:
data_array[1] = ''
# we have 2 separators
if nsharp == 2:
# if the length of BOTH fields is greater than 2 then we take them into account
if len(data_array[0]) < 3 or len(data_array[1]) < 3:
data_array[0] = ''
data_array[1] = ''
# get number of '/' separator on data_array[2]
# because ldata may contain '/' as Fiware-ServicePath name
nslash = data_array[2].count('/')
# then reconstruct data_array
data_array = [data_array[0], data_array[1]] + re.split(
"/", data_array[2])
# at the end data_array contains
# ["Fiware-Service", "Fiware-ServicePath", "s1", s1value, "s2", s2value, ...]
# just in case we have an ending CR or 0
data_array[len(data_array) - 1] = data_array[len(data_array) -
1].replace('\n', '')
data_array[len(data_array) - 1] = data_array[len(data_array) -
1].replace('\0', '')
#sms data to be sent
sms_data = "SensorData " + key_Orion.sensor_name + str(src)
#sms_data = "SRC#"+str(src)+"#RSSI#"+str(RSSI)+"#BW#"+str(bw)+"#CR#"+str(cr)+"#SF#"+str(sf)+"#GWID#"+gwid+"/"+data
#sms_data = "SensorData Sensor"+str(src)+" RSSI "+str(RSSI)+" BW "+str(bw)+" CR "+str(cr)+" SF "+str(sf)+" GWID "+gwid+" "
#start from the first nomenclature
i = 2
while i < len(data_array) - 1:
sms_data += " " + data_array[i] + " " + data_array[i + 1]
i += 2
if data_array[0] == '':
data_array[0] = key_Orion.project_name
if data_array[1] == '':
data_array[1] = key_Orion.service_path
sms_data += " " + data_array[0] + " " + data_array[1]
# Send data to expected contacts
success = False
if (not always_enabled):
if (libSMS.internet_ON()):
print('Internet is available, no need to use the SMS Service')
sys.exit()
else:
print("rcv msg to send via the Orion WAZIUP SMS Service: " +
sms_data)
success = libSMS.send_sms(sm, sms_data,
key_OrionWAZIUP_SMS.contacts)
else:
print("rcv msg to send via the Orion WAZIUP SMS Service: " +
sms_data)
success = libSMS.send_sms(sm, sms_data,
key_OrionWAZIUP_SMS.contacts)
if (success):
print "Sending SMS done"
else:
print "Source is not is source list, not sending with CloudOrionWAZIUP_SMS.py"