def readadc(gpio):
gpio.digital_write(GPIO_CS, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(GPIO_CS, GPIO.LOW)
r = spi.xfer2([0x01, 0xA0, 0x00])
gpio.digital_write(GPIO_CS, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
led_status = "Desligado"
if adcout > sensibilidade:
gpio.digital_write(LED, GPIO.HIGH)
led_status = "Ligado"
else:
gpio.digital_write(LED, GPIO.LOW)
led_status = "Apagado"
print(adcout)
print("Status do LED:%s" % led_status)
return r
def readPotenciometro(gpio):
r = spi.xfer2([0x01, 0xA0, 0x00])
gpio.digital_write(POTENCIOMETRO, GPIO.HIGH) #liga o potenciometro
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
print("Valor do Pot.:%d" % adcout)
return adcout
def ligarele():
gpio.digital_write(RELE, GPIO.HIGH)
#dweet.dweet_by_name(name="iplug_sabrina_q3", data={"rele":1})
#resposta = dweet.latest_dweet(name="iplug_sabrina_q3")
#print resposta['with'][0]['content']['button']
return ligarele()
def readLumi(gpio):
gpio.digital_write(GPIO_CS, GPIO.HIGH)
time.sleep(0.002)
gpio.digital_write(GPIO_CS, GPIO.LOW)
r = spi.xfer2([0x01, 0x80, 0x00])
gpio.digital_write(GPIO_CS, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
if (adcout < 200):
gpio.digital_write(LED, GPIO.HIGH)
print("Luz Ambiente Acesa")
else:
gpio.digital_write(LED, GPIO.LOW)
print("Luz Ambiente Apagada")
return adcout
def Man_Des():
#gpio.digital_write(LED, GPIO.LOW)
gpio.digital_write(RELE, GPIO.LOW)
alarme = 0
dweet.dweet_by_name(name="bmfmata",
data={
"alarme": alarme,
"temp": vtemp,
"lumi": vlumi,
"bam_nuvem": bam_nuvem,
"bebe": alarme_bebe,
"reset": reset_nuvem,
"estado": estado_am,
"liga_des": ld_nuvem,
})
print "Ar Condicionado Desligado"
print("Temperatura: %2.1f" % vtemp)
print("Luminosidade: %2.1f \n" % vlumi)
def Aut_Liga():
#gpio.digital_write(LED, GPIO.HIGH)
gpio.digital_write(RELE, GPIO.HIGH)
alarme = 1
dweet.dweet_by_name(name="bmfmata",
data={
"alarme": alarme,
"temp": vtemp,
"lumi": vlumi,
"bam_nuvem": bam_nuvem,
"bebe": alarme_bebe,
"reset": reset_nuvem,
"estado": estado_am,
"liga_des": ld_nuvem,
})
print "Sistema Automatico! \n"
print "Ar Condicionado Ligado"
print("Temperatura: %2.1f" % vtemp)
print("Luminosidade: %2.1f \n" % vlumi)
def readadc(gpio):
gpio.digital_write(GPIO_A, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(GPIO_A, GPIO.LOW)
r = spi.xfer2([0x01, 0x80, 0x00])
gpio.digital_write(GPIO_A, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
return adcout
def lerpot(gpio):
gpio.digital_write(GPIO_CS, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(GPIO_CS, GPIO.LOW)
r = spi.xfer2([0x01, 0xA0, 0x00])
gpio.digital_write(GPIO_CS, GPIO.HIGH)
ptvalor = (r[1] << 8) & 0b1100000000
ptvalor = ptvalor | (r[2] & 0xff)
print ("Valor do Potenciometro.:%d" %ptvalor)
def readtemp(gpio):
gpio.digital_write(GPIO_CS, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(GPIO_CS, GPIO.LOW)
r = spi.xfer2([0x01, 0xA0, 0x00])
gpio.digital_write(GPIO_CS, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
print ("Valor do Pot.:%d" %adcout)
return adcout
def readTemp(gpio):
gpio.digital_write(GPIO_CS, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(GPIO_CS, GPIO.LOW)
r = spi.xfer2([0x01, 0xA0, 0x00])
gpio.digital_write(GPIO_CS, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
adc_temp = (((adcout * 5.0) / 1023) - 0.5) * 100
return adc_temp
def readHum(gpio):
gpio.digital_write(HUMIDADE, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(HUMIDADE, GPIO.LOW)
r = spi.xfer2([0x01, (8 + 1) << 4, 0x00]) #ADC1
gpio.digital_write(HUMIDADE, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout3 = adcout | (r[2] & 0xff)
return adcout3
def luminosidade(gpio):
gpio.digital_write(GPIO_CS, GPIO.HIGH)
time.sleep(0.5)
gpio.digital_write(GPIO_CS, GPIO.LOW)
r2 = spi.xfer2([0x01, 0xA0, 0x00])
gpio.digital_write(GPIO_CS, GPIO.HIGH)
adcout = (r2[1] << 8) & 0b1100000000
adcout = adcout | (r2[2] & 0xff)
return adcout
def readVol(gpio):
gpio.digital_write(VOLUME, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(VOLUME, GPIO.LOW)
r = spi.xfer2([0x01, (8 + 3) << 4, 0x00]) #ADC3
gpio.digital_write(VOLUME, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout3 = adcout | (r[2] & 0xff)
return adcout3
def readhumidade(gpio):
gpio.digital_write(GPIO_CS, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(GPIO_CS, GPIO.LOW)
r = spi.xfer2([0x01, 0xA0, 0x00])
gpio.digital_write(GPIO_CS, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
adcout = (adcout / 1023) * 100
print("Valor da Humidade.:%d %%" % adcout)
return adcout
def temperatura(gpio):
gpio.digital_write(GPIO_CS, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(GPIO_CS, GPIO.LOW)
r1 = spi.xfer2([0x01, 0x80, 0x00])
gpio.digital_write(GPIO_CS, GPIO.HIGH)
adcout = (r1[1] << 8) & 0b1100000000
adcout = adcout | (r1[2] & 0xff)
adc_temp = (adcout * 5.0 / 1023 - 0.5) * 100
return adc_temp
def readLumi(gpio):
gpio.digital_write(SOL, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(SOL, GPIO.LOW)
r = spi.xfer2([0x01, (8 + 2) << 4, 0x00]) #ADC2
gpio.digital_write(SOL, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout2 = adcout | (r[2] & 0xff)
#print("Luminosidade: %d" %adcout)
return adcout2
def readTemp(gpio):
gpio.digital_write(TEMPERATURA, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(TEMPERATURA, GPIO.LOW)
r = spi.xfer2([0x01, (8 + 0) << 4, 0x00]) #ADC0
gpio.digital_write(TEMPERATURA, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
adc_temp = (adcout * 5.0 / 1023 - 0.5) * 100
return adc_temp
def readadc(gpio):
gpio.digital_write(GPIO_A, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(GPIO_A, GPIO.LOW)
r = spi.xfer2([0x01, 0xA0, 0x00])
gpio.digital_write(GPIO_A, GPIO.HIGH)
print(r)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
adc_temp = (adcout * 5.0 / 1023 - 0.5) * 100
print(adc_temp)
return r
def readVol(gpio):
gpio.digital_write(VOLUME, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(VOLUME, GPIO.LOW)
r = spi.xfer2([0x01, (8 + 3) << 4, 0x00])
gpio.digital_write(VOLUME, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
adc_temp = (adcout * 5.0 / 1023 - 0.5) * 100
#print("Temperatura:%2.1f " %adc_temp)
return adc_temp
def readpot(gpio):
gpio.digital_write(GPIO_A, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(GPIO_A, GPIO.LOW)
r = spi.xfer2([0x01, 0x80, 0x00])
gpio.digital_write(GPIO_A, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
return adcout
if adcout > 500.0:
with GPIO(pins) as gpio:
blink(gpio)
return adcout
def desligarele():
gpio.digital_write(RELE, GPIO.LOW)
spi.max_speed_hz = 10000
spi.mode = 0b00
spi.bits_per_word = 8
def readtemp(gpio):
gpio.digital_write(GPIO_CS, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(GPIO_CS, GPIO.LOW)
r = spi.xfer2([0x01, 0xA0, 0x00])
gpio.digital_write(GPIO_CS, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
print ("Valor do Pot.:%d" %adcout)
return adcout
while True:
with GPIO(pins) as gpio:
value = readtemp(gpio)
if value > 500:
gpio.digital_write(RELE, GPIO.HIGH)
else:
gpio.digital_write(RELE, GPIO.LOW)
time.sleep(0.5)
def desliga():
gpio.digital_write(RELE, GPIO.LOW)
print "Sistema Desligado"
def liga():
gpio.digital_write(RELE, GPIO.HIGH)
print "Sistema Ligado"
def ligaled():
gpio.digital_write(LED, GPIO.HIGH)
def writeDigital(gpio, digital):
write = digital
gpio.digital_write(ILUMINACAO, write[0])
gpio.digital_write(IRRIGACAO, write[1])
return digital
)
spi = spidev.SpiDev() #biblioteca SPI para acessar os pinos ADC1 e ADC2
spi.open(0, 0) #acessando ADC2
spi.max_speed_hz = 10000
spi.mode = 0b00
spi.bits_per_word = 8
def readPotenciometro(gpio):
r = spi.xfer2([0x01, 0xA0, 0x00])
gpio.digital_write(POTENCIOMETRO, GPIO.HIGH) #liga o potenciometro
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
print("Valor do Pot.:%d" % adcout)
return adcout
while True:
with GPIO(pins) as gpio:
value = readPotenciometro(
gpio) # le o valor do potenciometro e coloca na variavel
if value > 500:
gpio.digital_write(
LED, GPIO.HIGH) # liga o led para valores maiores que 500
else:
gpio.digital_write(LED, GPIO.LOW) # desliga o LED
time.sleep(0.5) #tempo de espera para proximo loop
import spidev
import time
from libsoc import gpio
from gpio_96boards import GPIO
TOQUE = GPIO.gpio_id('GPIO_A')
RELAY = GPIO.gpio_id('GPIO_C')
pins = ((TOQUE, 'in'), (RELAY, 'out'),)
with GPIO(pins) as gpio:
while True:
button_value = gpio.digital_read(TOQUE)
if button_value == 1:
gpio.digital_write(RELAY, 1)
else:
gpio.digital_write(RELAY, 0)
print("Status do Rele: %d" %button_value)
time.sleep(1)
spi = spidev.SpiDev()
spi.open(0, 0)
spi.max_speed_hz = 10000
spi.mode = 0b00
spi.bits_per_word = 8
def readpotenc(gpio):
gpio.digital_write(GPIO_CS, GPIO.HIGH)
time.sleep(0.0002)
gpio.digital_write(GPIO_CS, GPIO.LOW)
r = spi.xfer2([0x01, 0xA0, 0x00])
gpio.digital_write(GPIO_CS, GPIO.HIGH)
adcout = (r[1] << 8) & 0b1100000000
adcout = adcout | (r[2] & 0xff)
print("Valor do Potenciometro.:%d" % adcout)
return adcout
while True:
with GPIO(pins) as gpio:
value = readpotenc(gpio)
if value > 500:
gpio.digital_write(LED, GPIO.HIGH)
else:
gpio.digital_write(LED, GPIO.LOW)
time.sleep(0.5)
def desligaled():
gpio.digital_write(LED, GPIO.LOW)