def main():
bulb = Light("d0:73:d5:28:0b:4a", "10.0.0.16")
print("Selected {}".format(bulb.get_label()))
# get original state
original_power = bulb.get_power()
original_color = bulb.get_color()
bulb.set_power("on")
sleep(0.2) # to look pretty
print("Toggling power...")
toggle_device_power(bulb, 0.2)
print("Toggling color...")
toggle_light_color(bulb, 0.2)
# restore original color
# color can be restored after the power is turned off as well
print("Restoring original color and power...")
bulb.set_color(original_color)
sleep(1) # to look pretty.
# restore original power
bulb.set_power(original_power)
def state(self, device):
bulbRef = Light(device['mac'], device['ip'])
hsbk = bulbRef.get_color()
dev = Device(device['mac'], device['ip'], bulbRef.get_power(), hsbk[0],
hsbk[1], hsbk[2], hsbk[3])
return json.dumps(dev.__dict__)
def light_to_dict(light: Light):
return {
'name': light.get_label(),
'power': bool(light.get_power()),
'color': light.get_color(),
'macAddress': light.get_mac_addr()
}
def blink_light(mac, ip):
"""
Run a rapid blink on a light to provide a notification.
"""
light = Light(mac, ip)
colors = light.get_color()
power_state = light.get_power()
repeats = 3
delay = 0.25
light.set_power(1)
for _ in range(repeats):
light.set_color(RED, rapid=True)
sleep(delay)
light.set_color(GREEN, rapid=True)
sleep(delay)
light.set_color(BLUE, rapid=True)
sleep(delay)
if power_state:
light.set_color(colors)
else:
light.set_color(COLD_WHITE)
sleep(1)
light.set_color(colors)
light.set_power(power_state)
def Main():
while True:
i = GPIO.input(23)
if i == 0: #When output from motion sensor is LOW
now = datetime.now()
dt_string = now.strftime("%m/%d/%Y %H:%M:%S")
print dt_string, "No Motion Detected. Pin reads", i
while True:
try:
powerstatus = Light.get_power(doorlight)
except:
now = datetime.now()
dt_string = now.strftime("%m/%d/%Y %H:%M:%S")
print dt_string, "Couldn't get powerstatus while no motion is detected. Return is", powerstatus
continue
break
now = datetime.now()
dt_string = now.strftime("%m/%d/%Y %H:%M:%S")
print dt_string, "Before no motion power check", powerstatus
if powerstatus != 0: #Check if lights are currently turned on
now = datetime.now()
dt_string = now.strftime("%m/%d/%Y %H:%M:%S")
print dt_string, "After power check inside no motion", powerstatus
officelights.set_power(0) #Turn lights off
time.sleep(10)
elif i == 1: #When output from motion sensor is HIGH
now = datetime.now()
dt_string = now.strftime("%m/%d/%Y %H:%M:%S")
print dt_string, "Motion Detected. Pin reads", i
while True:
try:
powerstatus = Light.get_power(doorlight)
except:
now = datetime.now()
dt_string = now.strftime("%m/%d/%Y %H:%M:%S")
print dt_string, "Couldn't get powerstatus while motion is detected. Return is", powerstatus
continue
break
now = datetime.now()
dt_string = now.strftime("%m/%d/%Y %H:%M:%S")
print dt_string, "Motion detected powerstatus", powerstatus
if powerstatus == 0: #Check if lights are currently turned off
now = datetime.now()
dt_string = now.strftime("%m/%d/%Y %H:%M:%S")
print dt_string, "After power check inside motion detected", powerstatus
officelights.set_power(65535) #Turn lights on full
time.sleep(600)
class Bulb(object):
def __init__(self, ip, mac, multizone=False):
self.rapid = False
if multizone:
self.bulb = MultiZoneLight(mac, ip)
else:
self.bulb = Light(mac, ip)
def supports_multizone(self):
return self.bulb.supports_multizone()
def get_color_zones(self):
return self.bulb.get_color_zones()
def set_zone_color(self, startZone, endZone, color, duration=5):
return self.bulb.set_zone_color(startZone,
endZone,
color,
duration=duration,
rapid=self.rapid)
def set_zone_colors(self, colors, duration=5):
return self.bulb.set_zone_colors(colors,
duration=duration,
rapid=self.rapid)
def set_power(self, power, duration=5):
if duration:
self.bulb.set_power(power, duration=duration, rapid=self.rapid)
else:
self.bulb.set_power(power)
def get_power(self):
return self.bulb.get_power()
def set_color(self, color, duration=5):
if duration:
self.bulb.set_color(color, duration=duration, rapid=self.rapid)
else:
self.bulb.set_color(color)
def get_color(self):
return self.bulb.get_color()
def get_label(self):
return self.bulb.get_label()
def get_brightness(self):
return self.bulb.get_color()[2]
def set_brightness(self, brightness, duration=5):
return self.bulb.set_brightness(brightness, duration, rapid=self.rapid)
def fast_mode(self, hostIP=None):
self.rapid = True
def slow_mode(self):
self.rapid = False
def toggle_device_power(device: lifxlan.Light, interval=.5, num_cycles=3):
original_power_state = device.get_power()
device.set_power("off")
rapid = True if interval < 1 else False
for i in range(num_cycles):
device.set_power("on", rapid)
sleep(interval)
device.set_power("off", rapid)
sleep(interval)
device.set_power(original_power_state)
def power_status(mac, ip):
try:
light = Light(mac, ip)
power_state = light.get_power()
return power_state
except Exception as e:
print(e)
class LifxLightBulb(LightBulb):
def __init__(self, ip_addr, mac_addr):
_LOGGER.info('creating ip_addr=%s mac_addr=%s', ip_addr, mac_addr)
self._device = Light(mac_addr, ip_addr)
def get_power(self):
_LOGGER.info('getting power')
return self._device.get_power() == 65536
def turn_on(self):
_LOGGER.info('turning on')
self._device.set_power(True)
def turn_off(self):
_LOGGER.info('turning off')
self._device.set_power(False)
def set_color(self, color):
_LOGGER.debug('setting color=%s', color)
self._device.set_color(to_hsbk(color), rapid=True)
class LightController:
def __init__(self, mac = None, ip = None):
self.bulb = None
if mac != None and ip != None:
self.bulb = Light(mac, ip) # put a try block in here later
elif self.bulb == None: #put this in the catch block later
lights = LifxLAN(1)
self.bulb = lights.get_lights()[0] # just get whatever light you find
else:
lights = LifxLAN(1)
self.bulb = lights.get_lights()[0]
self.color = 0
#self.colors = [BLUE, CYAN, GREEN, ORANGE, PINK, PURPLE, RED, YELLOW, WHITE]
self.colors = [BLUE, GREEN, RED, WHITE]
def shiftColor(self):
self.color = (1 + self.color) % len(self.colors)
self.bulb.set_color(self.colors[self.color])
def togglePower(self):
if self.bulb.get_power() == 65535:
self.bulb.set_power(0)
else:
self.bulb.set_power(65535)
def set_lights(self, postvars={}):
sched.pause()
resp = 'no post data found'
l = None
if any(postvars):
resp = 'vars!'
mac = postvars.get('mac', None)
if mac:
ip = postvars.get('ip', None)
if ip:
l = Light(mac[0], ip[0])
light = postvars.get('light', None)
if light:
logging.debug(light)
if light[0] in LIGHTS:
logging.debug('found {}'.format(light[0]))
light = LIGHTS.get(light[0])
mac = light.get('mac')
ip = light.get('ip')
colour = light.get('colour')
l = Light(mac, ip)
else:
logging.debug(LIGHTS)
l = self.devices.get_device_by_name(light[0])
if l:
colour = l.get_color()
if l:
level = postvars.get('level', None)
dim = postvars.get('dim', None)
white = postvars.get('white', None)
if level is not None:
try:
if (level[0] == 'full'):
h, s, b, k = colour
b = 65535
l.set_power('on')
l.set_color([h, s, b, k], 300)
else:
l.set_power(level[0])
resp = 'set power {}'.format(level)
except Exception as e:
resp = 'err... {}'.format(repr(e))
elif dim is not None:
switch_after_dim = False
try:
h, s, b, k = colour
if l.get_power() == 0:
switch_after_dim = True
b = 0
dim = dim[0]
if dim not in ('up', 'down'):
dim = LIGHTS[l.get_label()].get('last_dim', None)
if dim is None or b in (0, 65535):
if b > 32000:
dim = 'down'
else:
dim = 'up'
if dim == 'down':
b -= 6554
if dim == 'up':
b += 6554
if b < 0:
b = 0
if b > 65535:
b = 65535
l.set_color([h, s, b, k], 600)
if LIGHTS.get(l.get_label(), None) is None:
LIGHTS[l.get_label()] = {'mac': l.get_mac_addr(),
'ip': l.get_ip_addr(),
'colour': l.get_color(),
'last_dim': dim}
else:
LIGHTS[l.get_label()]['colour'] = [h, s, b, k]
LIGHTS[l.get_label()]['last_dim'] = dim
if switch_after_dim is True:
l.set_power('on')
resp = 'set brightness {}'.format(b)
except Exception as e:
resp = 'dim... {}'.format(repr(e))
elif white is not None:
try:
h, s, b, k = colour
white = white[0]
if white not in ('warm', 'cool'):
k = int(white)
if white == 'warm':
k -= 500
if white == 'cool':
k += 500
if k < 2500:
k = 2500
if k > 9000:
k = 9000
l.set_color([h, s, b, k], 500)
if LIGHTS.get(l.get_label(), None) is None:
LIGHTS[l.get_label()] = {'mac': l.get_mac_addr(),
'ip': l.get_ip_addr(),
'colour': l.get_color()}
else:
LIGHTS[l.get_label()]['colour'] = [h, s, b, k]
resp = 'set white level {}'.format(k)
except Exception as e:
resp = 'white... {}'.format(repr(e))
else:
try:
if l.get_power() > 0:
l.set_power(0)
else:
l.set_power('on')
except:
resp = 'nope...'
else:
resp = "<p>Light not found ):</p>"
sched.resume()
return resp
import RPi.GPIO as GPIO
import requests
import time
from lifxlan import LifxLAN, Light, WHITE
from gpiozero import Button
from time import sleep
# Turn off GPIO warnings
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BCM)
# Variables - Add your MAC and IP number here.
lifxlan = Light("d0:23:d5:2d:4e:60", "192.168.2.1")
currentstate = 0
button = Button(14)
previousstate = lifxlan.get_power()
lightname = lifxlan.get_label()
# Show current light state
if previousstate == 0:
print("The", lightname, "is currently OFF")
elif previousstate == 65535:
print("The", lightname, "is currently ON")
try:
print("Starting LiPiSwitch for the light named", lightname, "...")
print("")
print("lifXbutton Ready ...")
print("")
# Loop until user quits with CTRL-C