def __init__(self, nrows, ncols,
subplot_spec,
wspace=None, hspace=None,
height_ratios=None, width_ratios=None):
"""
The number of rows and number of columns of the grid need to
be set. An instance of SubplotSpec is also needed to be set
from which the layout parameters will be inherited. The wspace
and hspace of the layout can be optionally specified or the
default values (from the figure or rcParams) will be used.
"""
self._wspace = wspace
self._hspace = hspace
self._subplot_spec = subplot_spec
GridSpecBase.__init__(self, nrows, ncols,
width_ratios=width_ratios,
height_ratios=height_ratios)
# do the layoutboxes
subspeclb = subplot_spec._layoutbox
if subspeclb is None:
self._layoutbox = None
else:
# OK, this is needed to divide the figure.
self._layoutbox = subspeclb.layout_from_subplotspec(
subplot_spec,
name=subspeclb.name + '.gridspec' + layoutbox.seq_id(),
artist=self)
def __init__(self, nrows, ncols, figure=None,
left=None, bottom=None, right=None, top=None,
wspace=None, hspace=None,
width_ratios=None, height_ratios=None):
"""
The number of rows and number of columns of the grid need to be set.
Optionally, the subplot layout parameters (e.g., left, right, etc.)
can be tuned.
Parameters
----------
nrows : int
Number of rows in grid.
ncols : int
Number or columns in grid.
figure : ~.figure.Figure, optional
left, right, top, bottom : float
Extent of the subplots as a fraction of figure width or height.
Left cannot be larger than right, and bottom cannot be larger than
top.
wspace : float
The amount of width reserved for space between subplots,
expressed as a fraction of the average axis width.
hspace : float
The amount of height reserved for space between subplots,
expressed as a fraction of the average axis height.
Notes
-----
See `~.figure.SubplotParams` for descriptions of the layout parameters.
"""
self.left = left
self.bottom = bottom
self.right = right
self.top = top
self.wspace = wspace
self.hspace = hspace
self.figure = figure
GridSpecBase.__init__(self, nrows, ncols,
width_ratios=width_ratios,
height_ratios=height_ratios)
if self.figure is None or not self.figure.get_constrained_layout():
self._layoutbox = None
else:
self.figure.init_layoutbox()
self._layoutbox = layoutbox.LayoutBox(
parent=self.figure._layoutbox,
name='gridspec' + layoutbox.seq_id(),
artist=self)
def __init__(self, nrows, ncols, figure=None,
left=None, bottom=None, right=None, top=None,
wspace=None, hspace=None,
width_ratios=None, height_ratios=None):
"""
The number of rows and number of columns of the grid need to be set.
Optionally, the subplot layout parameters (e.g., left, right, etc.)
can be tuned.
Parameters
----------
nrows : int
Number of rows in grid.
ncols : int
Number or columns in grid.
Notes
-----
See `~.figure.SubplotParams` for descriptions of the layout parameters.
"""
self.left = left
self.bottom = bottom
self.right = right
self.top = top
self.wspace = wspace
self.hspace = hspace
self.figure = figure
GridSpecBase.__init__(self, nrows, ncols,
width_ratios=width_ratios,
height_ratios=height_ratios)
if (self.figure is None) or not self.figure.get_constrained_layout():
self._layoutbox = None
else:
self.figure.init_layoutbox()
self._layoutbox = layoutbox.LayoutBox(
parent=self.figure._layoutbox,
name='gridspec' + layoutbox.seq_id(),
artist=self)
def __init__(self, gridspec, num1, num2=None):
"""
The subplot will occupy the num1-th cell of the given
gridspec. If num2 is provided, the subplot will span between
num1-th cell and num2-th cell.
The index starts from 0.
"""
self._gridspec = gridspec
self.num1 = num1
self.num2 = num2
if gridspec._layoutbox is not None:
glb = gridspec._layoutbox
# So note that here we don't assign any layout yet,
# just make the layoutbox that will contain all items
# associated w/ this axis. This can include other axes like
# a colorbar or a legend.
self._layoutbox = layoutbox.LayoutBox(
parent=glb,
name=glb.name + '.ss' + layoutbox.seq_id(),
artist=self)
else:
self._layoutbox = None
def __init__(self, gridspec, num1, num2=None):
"""
The subplot will occupy the num1-th cell of the given
gridspec. If num2 is provided, the subplot will span between
num1-th cell and num2-th cell.
The index starts from 0.
"""
self._gridspec = gridspec
self.num1 = num1
self.num2 = num2
if gridspec._layoutbox is not None:
glb = gridspec._layoutbox
# So note that here we don't assign any layout yet,
# just make the layoutbox that will contain all items
# associated w/ this axis. This can include other axes like
# a colorbar or a legend.
self._layoutbox = layoutbox.LayoutBox(parent=glb,
name=glb.name + '.ss' +
layoutbox.seq_id(),
artist=self)
else:
self._layoutbox = None
def __init__(self, fig, *args, **kwargs):
"""
*fig* is a :class:`matplotlib.figure.Figure` instance.
*args* is the tuple (*numRows*, *numCols*, *plotNum*), where
the array of subplots in the figure has dimensions *numRows*,
*numCols*, and where *plotNum* is the number of the subplot
being created. *plotNum* starts at 1 in the upper left
corner and increases to the right.
If *numRows* <= *numCols* <= *plotNum* < 10, *args* can be the
decimal integer *numRows* * 100 + *numCols* * 10 + *plotNum*.
"""
self.figure = fig
if len(args) == 1:
if isinstance(args[0], SubplotSpec):
self._subplotspec = args[0]
else:
try:
s = str(int(args[0]))
rows, cols, num = map(int, s)
except ValueError:
raise ValueError('Single argument to subplot must be '
'a 3-digit integer')
self._subplotspec = GridSpec(rows, cols,
figure=self.figure)[num - 1]
# num - 1 for converting from MATLAB to python indexing
elif len(args) == 3:
rows, cols, num = args
rows = int(rows)
cols = int(cols)
if isinstance(num, tuple) and len(num) == 2:
num = [int(n) for n in num]
self._subplotspec = GridSpec(
rows, cols,
figure=self.figure)[(num[0] - 1):num[1]]
else:
if num < 1 or num > rows*cols:
raise ValueError(
f"num must be 1 <= num <= {rows*cols}, not {num}")
self._subplotspec = GridSpec(
rows, cols, figure=self.figure)[int(num) - 1]
# num - 1 for converting from MATLAB to python indexing
else:
raise ValueError(f'Illegal argument(s) to subplot: {args}')
self.update_params()
# _axes_class is set in the subplot_class_factory
self._axes_class.__init__(self, fig, self.figbox, **kwargs)
# add a layout box to this, for both the full axis, and the poss
# of the axis. We need both because the axes may become smaller
# due to parasitic axes and hence no longer fill the subplotspec.
if self._subplotspec._layoutbox is None:
self._layoutbox = None
self._poslayoutbox = None
else:
name = self._subplotspec._layoutbox.name + '.ax'
name = name + layoutbox.seq_id()
self._layoutbox = layoutbox.LayoutBox(
parent=self._subplotspec._layoutbox,
name=name,
artist=self)
self._poslayoutbox = layoutbox.LayoutBox(
parent=self._layoutbox,
name=self._layoutbox.name+'.pos',
pos=True, subplot=True, artist=self)
def __init__(self,
nrows,
ncols,
figure=None,
left=None,
bottom=None,
right=None,
top=None,
wspace=None,
hspace=None,
width_ratios=None,
height_ratios=None):
"""
The number of rows and number of columns of the grid need to be set.
Optionally, the subplot layout parameters (e.g., left, right, etc.)
can be tuned.
Parameters
----------
nrows : int
Number of rows in grid.
ncols : int
Number or columns in grid.
figure : `~.figure.Figure`, optional
left, right, top, bottom : float, optional
Extent of the subplots as a fraction of figure width or height.
Left cannot be larger than right, and bottom cannot be larger than
top.
wspace : float, optional
The amount of width reserved for space between subplots,
expressed as a fraction of the average axis width.
hspace : float, optional
The amount of height reserved for space between subplots,
expressed as a fraction of the average axis height.
width_ratios : length *ncols* iterable, optional
Width ratios of the columns.
height_ratios : length *nrows* iterable, optional
Height ratios of the rows.
Notes
-----
See `~.figure.SubplotParams` for descriptions of the layout parameters.
"""
self.left = left
self.bottom = bottom
self.right = right
self.top = top
self.wspace = wspace
self.hspace = hspace
self.figure = figure
GridSpecBase.__init__(self,
nrows,
ncols,
width_ratios=width_ratios,
height_ratios=height_ratios)
if self.figure is None or not self.figure.get_constrained_layout():
self._layoutbox = None
else:
self.figure.init_layoutbox()
self._layoutbox = layoutbox.LayoutBox(
parent=self.figure._layoutbox,
name='gridspec' + layoutbox.seq_id(),
artist=self)
def __init__(self,
nrows,
ncols,
figure=None,
left=None,
bottom=None,
right=None,
top=None,
wspace=None,
hspace=None,
width_ratios=None,
height_ratios=None):
"""
Parameters
----------
nrows, ncols : int
The number of rows and columns of the grid.
figure : `~.figure.Figure`, optional
Only used for constrained layout to create a proper layoutbox.
left, right, top, bottom : float, optional
Extent of the subplots as a fraction of figure width or height.
Left cannot be larger than right, and bottom cannot be larger than
top. If not given, the values will be inferred from a figure or
rcParams at draw time. See also `GridSpec.get_subplot_params`.
wspace : float, optional
The amount of width reserved for space between subplots,
expressed as a fraction of the average axis width.
If not given, the values will be inferred from a figure or
rcParams when necessary. See also `GridSpec.get_subplot_params`.
hspace : float, optional
The amount of height reserved for space between subplots,
expressed as a fraction of the average axis height.
If not given, the values will be inferred from a figure or
rcParams when necessary. See also `GridSpec.get_subplot_params`.
width_ratios : array-like of length *ncols*, optional
Defines the relative widths of the columns. Each column gets a
relative width of ``width_ratios[i] / sum(width_ratios)``.
If not given, all columns will have the same width.
height_ratios : array-like of length *nrows*, optional
Defines the relative heights of the rows. Each column gets a
relative height of ``height_ratios[i] / sum(height_ratios)``.
If not given, all rows will have the same height.
"""
self.left = left
self.bottom = bottom
self.right = right
self.top = top
self.wspace = wspace
self.hspace = hspace
self.figure = figure
GridSpecBase.__init__(self,
nrows,
ncols,
width_ratios=width_ratios,
height_ratios=height_ratios)
if self.figure is None or not self.figure.get_constrained_layout():
self._layoutbox = None
else:
self.figure.init_layoutbox()
self._layoutbox = layoutbox.LayoutBox(
parent=self.figure._layoutbox,
name='gridspec' + layoutbox.seq_id(),
artist=self)
def __init__(self, fig, *args, **kwargs):
"""
*fig* is a :class:`matplotlib.figure.Figure` instance.
*args* is the tuple (*numRows*, *numCols*, *plotNum*), where
the array of subplots in the figure has dimensions *numRows*,
*numCols*, and where *plotNum* is the number of the subplot
being created. *plotNum* starts at 1 in the upper left
corner and increases to the right.
If *numRows* <= *numCols* <= *plotNum* < 10, *args* can be the
decimal integer *numRows* * 100 + *numCols* * 10 + *plotNum*.
"""
self.figure = fig
if len(args) == 1:
if isinstance(args[0], SubplotSpec):
self._subplotspec = args[0]
else:
try:
s = str(int(args[0]))
rows, cols, num = map(int, s)
except ValueError:
raise ValueError('Single argument to subplot must be '
'a 3-digit integer')
self._subplotspec = GridSpec(rows, cols,
figure=self.figure)[num - 1]
# num - 1 for converting from MATLAB to python indexing
elif len(args) == 3:
rows, cols, num = args
rows = int(rows)
cols = int(cols)
if isinstance(num, tuple) and len(num) == 2:
num = [int(n) for n in num]
self._subplotspec = GridSpec(
rows, cols, figure=self.figure)[(num[0] - 1):num[1]]
else:
if num < 1 or num > rows * cols:
raise ValueError(
("num must be 1 <= num <= {maxn}, not {num}").format(
maxn=rows * cols, num=num))
self._subplotspec = GridSpec(rows, cols,
figure=self.figure)[int(num) - 1]
# num - 1 for converting from MATLAB to python indexing
else:
raise ValueError('Illegal argument(s) to subplot: %s' % (args, ))
self.update_params()
# _axes_class is set in the subplot_class_factory
self._axes_class.__init__(self, fig, self.figbox, **kwargs)
# add a layout box to this, for both the full axis, and the poss
# of the axis. We need both because the axes may become smaller
# due to parasitic axes and hence no longer fill the subplotspec.
if self._subplotspec._layoutbox is None:
self._layoutbox = None
self._poslayoutbox = None
else:
name = self._subplotspec._layoutbox.name + '.ax'
name = name + layoutbox.seq_id()
self._layoutbox = layoutbox.LayoutBox(
parent=self._subplotspec._layoutbox, name=name, artist=self)
self._poslayoutbox = layoutbox.LayoutBox(
parent=self._layoutbox,
name=self._layoutbox.name + '.pos',
pos=True,
subplot=True,
artist=self)
def __init__(self, fig, *args, **kwargs):
"""
Parameters
----------
fig : `matplotlib.figure.Figure`
*args : tuple (*nrows*, *ncols*, *index*) or int
The array of subplots in the figure has dimensions ``(nrows,
ncols)``, and *index* is the index of the subplot being created.
*index* starts at 1 in the upper left corner and increases to the
right.
If *nrows*, *ncols*, and *index* are all single digit numbers, then
*args* can be passed as a single 3-digit number (e.g. 234 for
(2, 3, 4)).
"""
self.figure = fig
if len(args) == 1:
if isinstance(args[0], SubplotSpec):
self._subplotspec = args[0]
else:
try:
s = str(int(args[0]))
rows, cols, num = map(int, s)
except ValueError:
raise ValueError('Single argument to subplot must be '
'a 3-digit integer')
self._subplotspec = GridSpec(rows, cols,
figure=self.figure)[num - 1]
# num - 1 for converting from MATLAB to python indexing
elif len(args) == 3:
rows, cols, num = args
rows = int(rows)
cols = int(cols)
if rows <= 0:
raise ValueError(f'Number of rows must be > 0, not {rows}')
if cols <= 0:
raise ValueError(f'Number of columns must be > 0, not {cols}')
if isinstance(num, tuple) and len(num) == 2:
num = [int(n) for n in num]
self._subplotspec = GridSpec(
rows, cols, figure=self.figure)[(num[0] - 1):num[1]]
else:
if num < 1 or num > rows * cols:
raise ValueError(
f"num must be 1 <= num <= {rows*cols}, not {num}")
self._subplotspec = GridSpec(rows, cols,
figure=self.figure)[int(num) - 1]
# num - 1 for converting from MATLAB to python indexing
else:
raise ValueError(f'Illegal argument(s) to subplot: {args}')
self.update_params()
# _axes_class is set in the subplot_class_factory
self._axes_class.__init__(self, fig, self.figbox, **kwargs)
# add a layout box to this, for both the full axis, and the poss
# of the axis. We need both because the axes may become smaller
# due to parasitic axes and hence no longer fill the subplotspec.
if self._subplotspec._layoutbox is None:
self._layoutbox = None
self._poslayoutbox = None
else:
name = self._subplotspec._layoutbox.name + '.ax'
name = name + layoutbox.seq_id()
self._layoutbox = layoutbox.LayoutBox(
parent=self._subplotspec._layoutbox, name=name, artist=self)
self._poslayoutbox = layoutbox.LayoutBox(
parent=self._layoutbox,
name=self._layoutbox.name + '.pos',
pos=True,
subplot=True,
artist=self)