def test_selector_clear(selector):
ax = get_ax()
def onselect(*args):
pass
kwargs = dict(ax=ax, onselect=onselect, interactive=True)
if selector == 'span':
Selector = widgets.SpanSelector
kwargs['direction'] = 'horizontal'
else:
Selector = widgets.RectangleSelector
tool = Selector(**kwargs)
click_and_drag(tool, start=(10, 10), end=(100, 120))
# press-release event outside the selector to clear the selector
click_and_drag(tool, start=(130, 130), end=(130, 130))
assert not tool._selection_completed
ax = get_ax()
kwargs['ignore_event_outside'] = True
tool = Selector(**kwargs)
assert tool.ignore_event_outside
click_and_drag(tool, start=(10, 10), end=(100, 120))
# press-release event outside the selector ignored
click_and_drag(tool, start=(130, 130), end=(130, 130))
assert tool._selection_completed
do_event(tool, 'on_key_press', key='escape')
assert not tool._selection_completed
def test_polygon_selector_set_props_handle_props():
ax = get_ax()
ax._selections_count = 0
def onselect(vertices):
ax._selections_count += 1
ax._current_result = vertices
tool = widgets.PolygonSelector(ax, onselect,
props=dict(color='b', alpha=0.2),
handle_props=dict(alpha=0.5))
event_sequence = (polygon_place_vertex(50, 50)
+ polygon_place_vertex(150, 50)
+ polygon_place_vertex(50, 150)
+ polygon_place_vertex(50, 50))
for (etype, event_args) in event_sequence:
do_event(tool, etype, **event_args)
artist = tool._selection_artist
assert artist.get_color() == 'b'
assert artist.get_alpha() == 0.2
tool.set_props(color='r', alpha=0.3)
assert artist.get_color() == 'r'
assert artist.get_alpha() == 0.3
for artist in tool._handles_artists:
assert artist.get_color() == 'b'
assert artist.get_alpha() == 0.5
tool.set_handle_props(color='r', alpha=0.3)
for artist in tool._handles_artists:
assert artist.get_color() == 'r'
assert artist.get_alpha() == 0.3
def test_span_selector_onselect(interactive):
# check when press and release events take place at the same position
ax = get_ax()
def onselect(vmin, vmax):
ax._got_onselect = True
tool = widgets.SpanSelector(ax,
onselect,
'horizontal',
interactive=interactive)
do_event(tool, 'press', xdata=100, ydata=100, button=1)
# move outside of axis
do_event(tool, 'onmove', xdata=150, ydata=100, button=1)
do_event(tool, 'release', xdata=150, ydata=100, button=1)
assert tool.ax._got_onselect
assert tool.extents == (100, 150)
# Reset tool.ax._got_onselect
tool.ax._got_onselect = False
do_event(tool, 'press', xdata=10, ydata=100, button=1)
do_event(tool, 'release', xdata=10, ydata=100, button=1)
assert tool.ax._got_onselect
def test_span_selector_bound(direction):
fig, ax = plt.subplots(1, 1)
ax.plot([10, 20], [10, 30])
ax.figure.canvas.draw()
x_bound = ax.get_xbound()
y_bound = ax.get_ybound()
tool = widgets.SpanSelector(ax, print, direction, interactive=True)
assert ax.get_xbound() == x_bound
assert ax.get_ybound() == y_bound
bound = x_bound if direction == 'horizontal' else y_bound
assert tool._edge_handles.positions == list(bound)
press_data = [10.5, 11.5]
move_data = [11, 13] # Updating selector is done in onmove
release_data = move_data
do_event(tool, 'press', xdata=press_data[0], ydata=press_data[1], button=1)
do_event(tool, 'onmove', xdata=move_data[0], ydata=move_data[1], button=1)
assert ax.get_xbound() == x_bound
assert ax.get_ybound() == y_bound
index = 0 if direction == 'horizontal' else 1
handle_positions = [press_data[index], release_data[index]]
assert tool._edge_handles.positions == handle_positions
def check_polygon_selector(event_sequence, expected_result, selections_count):
"""
Helper function to test Polygon Selector.
Parameters
----------
event_sequence : list of tuples (etype, dict())
A sequence of events to perform. The sequence is a list of tuples
where the first element of the tuple is an etype (e.g., 'onmove',
'press', etc.), and the second element of the tuple is a dictionary of
the arguments for the event (e.g., xdata=5, key='shift', etc.).
expected_result : list of vertices (xdata, ydata)
The list of vertices that are expected to result from the event
sequence.
selections_count : int
Wait for the tool to call its `onselect` function `selections_count`
times, before comparing the result to the `expected_result`
"""
ax = get_ax()
ax._selections_count = 0
def onselect(vertices):
ax._selections_count += 1
ax._current_result = vertices
tool = widgets.PolygonSelector(ax, onselect)
for (etype, event_args) in event_sequence:
do_event(tool, etype, **event_args)
assert ax._selections_count == selections_count
assert ax._current_result == expected_result
def _resize_rectangle(tool, xdata, ydata, xdata_new, ydata_new,
use_key=None):
do_event(tool, 'press', xdata=xdata, ydata=ydata, button=1)
if use_key is not None:
do_event(tool, 'on_key_press', key=use_key)
do_event(tool, 'onmove', xdata=xdata_new, ydata=ydata_new, button=1)
if use_key is not None:
do_event(tool, 'on_key_release', key=use_key)
do_event(tool, 'release', xdata=xdata_new, ydata=ydata_new, button=1)
return tool
def test_TextBox():
from unittest.mock import Mock
submit_event = Mock()
text_change_event = Mock()
ax = get_ax()
tool = widgets.TextBox(ax, '')
tool.on_submit(submit_event)
tool.on_text_change(text_change_event)
assert tool.text == ''
do_event(tool, '_click')
tool.set_val('x**2')
assert tool.text == 'x**2'
assert text_change_event.call_count == 1
tool.begin_typing(tool.text)
tool.stop_typing()
assert submit_event.call_count == 2
do_event(tool, '_click')
do_event(tool, '_keypress', key='+')
do_event(tool, '_keypress', key='5')
assert text_change_event.call_count == 3
def test_TextBox(toolbar):
# Avoid "toolmanager is provisional" warning.
dict.__setitem__(plt.rcParams, "toolbar", toolbar)
from unittest.mock import Mock
submit_event = Mock()
text_change_event = Mock()
ax = get_ax()
tool = widgets.TextBox(ax, '')
tool.on_submit(submit_event)
tool.on_text_change(text_change_event)
assert tool.text == ''
do_event(tool, '_click')
tool.set_val('x**2')
assert tool.text == 'x**2'
assert text_change_event.call_count == 1
tool.begin_typing(tool.text)
tool.stop_typing()
assert submit_event.call_count == 2
do_event(tool, '_click')
do_event(tool, '_keypress', key='+')
do_event(tool, '_keypress', key='5')
assert text_change_event.call_count == 3
def test_polygon_selector_verts_setter(fig_test, fig_ref):
verts = [(0.1, 0.4), (0.5, 0.9), (0.3, 0.2)]
ax_test = fig_test.add_subplot()
def onselect(vertices):
pass
tool_test = widgets.PolygonSelector(ax_test, onselect)
tool_test.verts = verts
assert tool_test.verts == verts
ax_ref = fig_ref.add_subplot()
tool_ref = widgets.PolygonSelector(ax_ref, onselect)
event_sequence = (polygon_place_vertex(*verts[0]) +
polygon_place_vertex(*verts[1]) +
polygon_place_vertex(*verts[2]) +
polygon_place_vertex(*verts[0]))
for (etype, event_args) in event_sequence:
do_event(tool_ref, etype, **event_args)
def check_span(*args, **kwargs):
ax = get_ax()
def onselect(vmin, vmax):
ax._got_onselect = True
assert vmin == 100
assert vmax == 150
def onmove(vmin, vmax):
assert vmin == 100
assert vmax == 125
ax._got_on_move = True
if 'onmove_callback' in kwargs:
kwargs['onmove_callback'] = onmove
tool = widgets.SpanSelector(ax, onselect, *args, **kwargs)
do_event(tool, 'press', xdata=100, ydata=100, button=1)
do_event(tool, 'onmove', xdata=125, ydata=125, button=1)
do_event(tool, 'release', xdata=150, ydata=150, button=1)
assert ax._got_onselect
if 'onmove_callback' in kwargs:
assert ax._got_on_move
def test_rectangle_selector_set_props_handle_props():
ax = get_ax()
def onselect(epress, erelease):
pass
tool = widgets.RectangleSelector(ax,
onselect,
interactive=True,
props=dict(facecolor='b', alpha=0.2),
handle_props=dict(alpha=0.5))
# Create rectangle
do_event(tool, 'press', xdata=0, ydata=10, button=1)
do_event(tool, 'onmove', xdata=100, ydata=120, button=1)
do_event(tool, 'release', xdata=100, ydata=120, button=1)
artist = tool._selection_artist
assert artist.get_facecolor() == mcolors.to_rgba('b', alpha=0.2)
tool.set_props(facecolor='r', alpha=0.3)
assert artist.get_facecolor() == mcolors.to_rgba('r', alpha=0.3)
for artist in tool._handles_artists:
assert artist.get_markeredgecolor() == 'black'
assert artist.get_alpha() == 0.5
tool.set_handle_props(markeredgecolor='r', alpha=0.3)
for artist in tool._handles_artists:
assert artist.get_markeredgecolor() == 'r'
assert artist.get_alpha() == 0.3
def test_polygon_selector_redraw():
verts = [(50, 50), (150, 50), (50, 150)]
event_sequence = (
polygon_place_vertex(*verts[0]) + polygon_place_vertex(*verts[1]) +
polygon_place_vertex(*verts[2]) + polygon_place_vertex(*verts[0]) +
# Polygon completed, now remove first two verts
polygon_remove_vertex(*verts[1]) + polygon_remove_vertex(*verts[2]) +
# At this point the tool should be reset so we can add
# more vertices
polygon_place_vertex(*verts[1]))
ax = get_ax()
def onselect(vertices):
pass
tool = widgets.PolygonSelector(ax, onselect)
for (etype, event_args) in event_sequence:
do_event(tool, etype, **event_args)
# After removing two verts, only one remains, and the
# selector should be automatically resete
assert tool.verts == verts[0:2]
def test_rectangle_rotate(selector_class):
ax = get_ax()
def onselect(epress, erelease):
pass
tool = selector_class(ax, onselect=onselect, interactive=True)
# Draw rectangle
click_and_drag(tool, start=(100, 100), end=(130, 140))
assert tool.extents == (100, 130, 100, 140)
assert len(tool._state) == 0
# Rotate anticlockwise using top-right corner
do_event(tool, 'on_key_press', key='r')
assert tool._state == set(['rotate'])
assert len(tool._state) == 1
click_and_drag(tool, start=(130, 140), end=(120, 145))
do_event(tool, 'on_key_press', key='r')
assert len(tool._state) == 0
# Extents shouldn't change (as shape of rectangle hasn't changed)
assert tool.extents == (100, 130, 100, 140)
assert_allclose(tool.rotation, 25.56, atol=0.01)
tool.rotation = 45
assert tool.rotation == 45
# Corners should move
assert_allclose(tool.corners,
np.array([[118.53, 139.75, 111.46, 90.25],
[95.25, 116.46, 144.75, 123.54]]), atol=0.01)
# Scale using top-right corner
click_and_drag(tool, start=(110, 145), end=(110, 160))
assert_allclose(tool.extents, (100, 139.75, 100, 151.82), atol=0.01)
if selector_class == widgets.RectangleSelector:
with pytest.raises(ValueError):
tool._selection_artist.rotation_point = 'unvalid_value'
def check_lasso_selector(**kwargs):
ax = get_ax()
def onselect(verts):
ax._got_onselect = True
assert verts == [(100, 100), (125, 125), (150, 150)]
tool = widgets.LassoSelector(ax, onselect, **kwargs)
do_event(tool, 'press', xdata=100, ydata=100, button=1)
do_event(tool, 'onmove', xdata=125, ydata=125, button=1)
do_event(tool, 'release', xdata=150, ydata=150, button=1)
assert ax._got_onselect
def check_rectangle(**kwargs):
ax = get_ax()
def onselect(epress, erelease):
ax._got_onselect = True
assert epress.xdata == 100
assert epress.ydata == 100
assert erelease.xdata == 199
assert erelease.ydata == 199
tool = widgets.RectangleSelector(ax, onselect, **kwargs)
do_event(tool, 'press', xdata=100, ydata=100, button=1)
do_event(tool, 'onmove', xdata=199, ydata=199, button=1)
# purposely drag outside of axis for release
do_event(tool, 'release', xdata=250, ydata=250, button=1)
if kwargs.get('drawtype', None) not in ['line', 'none']:
assert_allclose(
tool.geometry,
[[100., 100, 199, 199, 100], [100, 199, 199, 100, 100]],
err_msg=tool.geometry)
assert ax._got_onselect
def test_span_selector_drag(drag_from_anywhere):
ax = get_ax()
def onselect(*args):
pass
# Create span
tool = widgets.SpanSelector(ax,
onselect,
'horizontal',
interactive=True,
drag_from_anywhere=drag_from_anywhere)
do_event(tool, 'press', xdata=10, ydata=10, button=1)
do_event(tool, 'onmove', xdata=100, ydata=120, button=1)
do_event(tool, 'release', xdata=100, ydata=120, button=1)
assert tool.extents == (10, 100)
# Drag inside span
#
# If drag_from_anywhere == True, this will move the span by 10,
# giving new value extents = 20, 110
#
# If drag_from_anywhere == False, this will create a new span with
# value extents = 25, 35
do_event(tool, 'press', xdata=25, ydata=15, button=1)
do_event(tool, 'onmove', xdata=35, ydata=25, button=1)
do_event(tool, 'release', xdata=35, ydata=25, button=1)
if drag_from_anywhere:
assert tool.extents == (20, 110)
else:
assert tool.extents == (25, 35)
# Check that in both cases, dragging outside the span draws a new span
do_event(tool, 'press', xdata=175, ydata=185, button=1)
do_event(tool, 'onmove', xdata=185, ydata=195, button=1)
do_event(tool, 'release', xdata=185, ydata=195, button=1)
assert tool.extents == (175, 185)
def test_rectangle_handles():
ax = get_ax()
def onselect(epress, erelease):
pass
tool = widgets.RectangleSelector(ax,
onselect=onselect,
maxdist=10,
interactive=True,
marker_props={
'markerfacecolor': 'r',
'markeredgecolor': 'b'
})
tool.extents = (100, 150, 100, 150)
assert tool.corners == ((100, 150, 150, 100), (100, 100, 150, 150))
assert tool.extents == (100, 150, 100, 150)
assert tool.edge_centers == ((100, 125.0, 150, 125.0), (125.0, 100, 125.0,
150))
assert tool.extents == (100, 150, 100, 150)
# grab a corner and move it
do_event(tool, 'press', xdata=100, ydata=100)
do_event(tool, 'onmove', xdata=120, ydata=120)
do_event(tool, 'release', xdata=120, ydata=120)
assert tool.extents == (120, 150, 120, 150)
# grab the center and move it
do_event(tool, 'press', xdata=132, ydata=132)
do_event(tool, 'onmove', xdata=120, ydata=120)
do_event(tool, 'release', xdata=120, ydata=120)
assert tool.extents == (108, 138, 108, 138)
# create a new rectangle
do_event(tool, 'press', xdata=10, ydata=10)
do_event(tool, 'onmove', xdata=100, ydata=100)
do_event(tool, 'release', xdata=100, ydata=100)
assert tool.extents == (10, 100, 10, 100)
# Check that marker_props worked.
assert mcolors.same_color(
tool._corner_handles.artist.get_markerfacecolor(), 'r')
assert mcolors.same_color(
tool._corner_handles.artist.get_markeredgecolor(), 'b')
def test_selector_clear_method(selector):
ax = get_ax()
def onselect(*args):
pass
if selector == 'span':
tool = widgets.SpanSelector(ax,
onselect,
'horizontal',
interactive=True,
ignore_event_outside=True)
else:
tool = widgets.RectangleSelector(ax, onselect, interactive=True)
do_event(tool, 'press', xdata=10, ydata=10, button=1)
do_event(tool, 'onmove', xdata=100, ydata=120, button=1)
do_event(tool, 'release', xdata=100, ydata=120, button=1)
assert tool._selection_completed
assert tool.visible
if selector == 'span':
assert tool.extents == (10, 100)
tool.clear()
assert not tool._selection_completed
assert not tool.visible
# Do another cycle of events to make sure we can
do_event(tool, 'press', xdata=10, ydata=10, button=1)
do_event(tool, 'onmove', xdata=50, ydata=120, button=1)
do_event(tool, 'release', xdata=50, ydata=120, button=1)
assert tool._selection_completed
assert tool.visible
if selector == 'span':
assert tool.extents == (10, 50)
def test_rectangle_drag(drag_from_anywhere, new_center):
ax = get_ax()
def onselect(epress, erelease):
pass
tool = widgets.RectangleSelector(ax,
onselect,
interactive=True,
drag_from_anywhere=drag_from_anywhere)
# Create rectangle
do_event(tool, 'press', xdata=0, ydata=10, button=1)
do_event(tool, 'onmove', xdata=100, ydata=120, button=1)
do_event(tool, 'release', xdata=100, ydata=120, button=1)
assert tool.center == (50, 65)
# Drag inside rectangle, but away from centre handle
#
# If drag_from_anywhere == True, this will move the rectangle by (10, 10),
# giving it a new center of (60, 75)
#
# If drag_from_anywhere == False, this will create a new rectangle with
# center (30, 20)
do_event(tool, 'press', xdata=25, ydata=15, button=1)
do_event(tool, 'onmove', xdata=35, ydata=25, button=1)
do_event(tool, 'release', xdata=35, ydata=25, button=1)
assert tool.center == new_center
# Check that in both cases, dragging outside the rectangle draws a new
# rectangle
do_event(tool, 'press', xdata=175, ydata=185, button=1)
do_event(tool, 'onmove', xdata=185, ydata=195, button=1)
do_event(tool, 'release', xdata=185, ydata=195, button=1)
assert tool.center == (180, 190)
def test_span_selector_ignore_outside(ignore_event_outside):
ax = get_ax()
def onselect(vmin, vmax):
ax._got_onselect = True
def onmove(vmin, vmax):
ax._got_on_move = True
tool = widgets.SpanSelector(ax,
onselect,
'horizontal',
onmove_callback=onmove,
ignore_event_outside=ignore_event_outside)
do_event(tool, 'press', xdata=100, ydata=100, button=1)
do_event(tool, 'onmove', xdata=125, ydata=125, button=1)
do_event(tool, 'release', xdata=125, ydata=125, button=1)
assert ax._got_onselect
assert ax._got_on_move
assert tool.extents == (100, 125)
# Reset
ax._got_onselect = False
ax._got_on_move = False
# Trigger event outside of span
do_event(tool, 'press', xdata=150, ydata=150, button=1)
do_event(tool, 'onmove', xdata=160, ydata=160, button=1)
do_event(tool, 'release', xdata=160, ydata=160, button=1)
if ignore_event_outside:
# event have been ignored and span haven't changed.
assert not ax._got_onselect
assert not ax._got_on_move
assert tool.extents == (100, 125)
else:
# A new shape is created
assert ax._got_onselect
assert ax._got_on_move
assert tool.extents == (150, 160)
def test_rectangle_selector_ignore_outside(ignore_event_outside):
ax = get_ax()
def onselect(vmin, vmax):
ax._got_onselect = True
tool = widgets.RectangleSelector(ax,
onselect,
ignore_event_outside=ignore_event_outside)
do_event(tool, 'press', xdata=100, ydata=110, button=1)
do_event(tool, 'onmove', xdata=150, ydata=120, button=1)
do_event(tool, 'release', xdata=150, ydata=120, button=1)
assert tool.ax._got_onselect
assert tool.extents == (100.0, 150.0, 110.0, 120.0)
# Reset
ax._got_onselect = False
# Trigger event outside of span
do_event(tool, 'press', xdata=150, ydata=150, button=1)
do_event(tool, 'onmove', xdata=160, ydata=160, button=1)
do_event(tool, 'release', xdata=160, ydata=160, button=1)
if ignore_event_outside:
# event have been ignored and span haven't changed.
assert not ax._got_onselect
assert tool.extents == (100.0, 150.0, 110.0, 120.0)
else:
# A new shape is created
assert ax._got_onselect
assert tool.extents == (150.0, 160.0, 150.0, 160.0)
def test_rectangle_handles():
ax = get_ax()
def onselect(epress, erelease):
pass
tool = widgets.RectangleSelector(ax,
onselect=onselect,
maxdist=10,
interactive=True)
tool.extents = (100, 150, 100, 150)
assert tool.corners == ((100, 150, 150, 100), (100, 100, 150, 150))
assert tool.extents == (100, 150, 100, 150)
assert tool.edge_centers == ((100, 125.0, 150, 125.0), (125.0, 100, 125.0,
150))
assert tool.extents == (100, 150, 100, 150)
# grab a corner and move it
do_event(tool, 'press', xdata=100, ydata=100)
do_event(tool, 'onmove', xdata=120, ydata=120)
do_event(tool, 'release', xdata=120, ydata=120)
assert tool.extents == (120, 150, 120, 150)
# grab the center and move it
do_event(tool, 'press', xdata=132, ydata=132)
do_event(tool, 'onmove', xdata=120, ydata=120)
do_event(tool, 'release', xdata=120, ydata=120)
assert tool.extents == (108, 138, 108, 138)
# create a new rectangle
do_event(tool, 'press', xdata=10, ydata=10)
do_event(tool, 'onmove', xdata=100, ydata=100)
do_event(tool, 'release', xdata=100, ydata=100)
assert tool.extents == (10, 100, 10, 100)
def test_ellipse():
"""For ellipse, test out the key modifiers"""
ax = get_ax()
def onselect(epress, erelease):
pass
tool = widgets.EllipseSelector(ax,
onselect=onselect,
maxdist=10,
interactive=True)
tool.extents = (100, 150, 100, 150)
# drag the rectangle
do_event(tool, 'press', xdata=10, ydata=10, button=1, key=' ')
do_event(tool, 'onmove', xdata=30, ydata=30, button=1)
do_event(tool, 'release', xdata=30, ydata=30, button=1)
assert tool.extents == (120, 170, 120, 170)
# create from center
do_event(tool,
'on_key_press',
xdata=100,
ydata=100,
button=1,
key='control')
do_event(tool, 'press', xdata=100, ydata=100, button=1)
do_event(tool, 'onmove', xdata=125, ydata=125, button=1)
do_event(tool, 'release', xdata=125, ydata=125, button=1)
do_event(tool,
'on_key_release',
xdata=100,
ydata=100,
button=1,
key='control')
assert tool.extents == (75, 125, 75, 125)
# create a square
do_event(tool, 'on_key_press', xdata=10, ydata=10, button=1, key='shift')
do_event(tool, 'press', xdata=10, ydata=10, button=1)
do_event(tool, 'onmove', xdata=35, ydata=30, button=1)
do_event(tool, 'release', xdata=35, ydata=30, button=1)
do_event(tool, 'on_key_release', xdata=10, ydata=10, button=1, key='shift')
extents = [int(e) for e in tool.extents]
assert extents == [10, 35, 10, 34]
# create a square from center
do_event(tool,
'on_key_press',
xdata=100,
ydata=100,
button=1,
key='ctrl+shift')
do_event(tool, 'press', xdata=100, ydata=100, button=1)
do_event(tool, 'onmove', xdata=125, ydata=130, button=1)
do_event(tool, 'release', xdata=125, ydata=130, button=1)
do_event(tool,
'on_key_release',
xdata=100,
ydata=100,
button=1,
key='ctrl+shift')
extents = [int(e) for e in tool.extents]
assert extents == [70, 129, 70, 130]
assert tool.geometry.shape == (2, 73)
assert_allclose(tool.geometry[:, 0], [70., 100])
def test_selector_clear(selector):
ax = get_ax()
def onselect(*args):
pass
kwargs = dict(ax=ax, onselect=onselect, interactive=True)
if selector == 'span':
Selector = widgets.SpanSelector
kwargs['direction'] = 'horizontal'
else:
Selector = widgets.RectangleSelector
tool = Selector(**kwargs)
do_event(tool, 'press', xdata=10, ydata=10, button=1)
do_event(tool, 'onmove', xdata=100, ydata=120, button=1)
do_event(tool, 'release', xdata=100, ydata=120, button=1)
# press-release event outside the selector to clear the selector
do_event(tool, 'press', xdata=130, ydata=130, button=1)
do_event(tool, 'release', xdata=130, ydata=130, button=1)
assert not tool._selection_completed
ax = get_ax()
kwargs['ignore_event_outside'] = True
tool = Selector(**kwargs)
assert tool.ignore_event_outside
do_event(tool, 'press', xdata=10, ydata=10, button=1)
do_event(tool, 'onmove', xdata=100, ydata=120, button=1)
do_event(tool, 'release', xdata=100, ydata=120, button=1)
# press-release event outside the selector ignored
do_event(tool, 'press', xdata=130, ydata=130, button=1)
do_event(tool, 'release', xdata=130, ydata=130, button=1)
assert tool._selection_completed
do_event(tool, 'on_key_press', key='escape')
assert not tool._selection_completed