def stream(stub, key, key_stack):
# _Rendezvousオブジェクトを受け取る
responses = stub.Stream(message_pb2.Request(key=key))
for res in responses:
if key not in key_stack:
responses.cancel()
# これでもいい
# res.cancel()
key_stack.discard(key)
def calculadora(net):
while True:
print("Escutando requisicao...")
operation = message_pb2.Request()
resposta = message_pb2.Reply()
data, addr = net.recvfrom(1024) #receive 1024 bytes
operation.ParseFromString(data)
resposta.res = calcula(operation.n1,operation.op,operation.n2)
net.sendto(resposta.SerializeToString(),addr)
print ("resultado enviado para: ",addr)
def main():
net = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
net.bind(("localhost", 8000))
while True:
print("Escutando requisicao...")
operation = message_pb2.Request()
resposta = message_pb2.Reply()
data, addr = net.recvfrom(1024) #receive 1024 bytes
operation.ParseFromString(data)
resposta.res = calcula(operation.n1, operation.op, operation.n2)
net.sendto(resposta.SerializeToString(), addr)
print("resultado enviado para: ", addr)
def main():
net = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
request = messages_pb2.Request()
response = messages_pb2.Reply()
net.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
net.setsockopt(socket.SOL_SOCKET, socket.SO_BROADCAST, 1)
flag = True
while flag:
op = int(
raw_input(
"Digite 0 para impressao, 1 Calculadora, 2 Som, 3 projetor"))
request.op = op
net.sendto(request.SerializeToString(), ("255.255.255.255", 8000))
net.settimeout(4) # seta o tempo de timeout para 4 segundos
try:
data, ip = net.recvfrom(2048)
response.ParseFromString(data)
flag = False # para o laco se encontrar o dispositivo
except:
print("Dispositivos nao encontrado")
continue
print("Encontrado!")
tupla = (response.ip, response.port)
while True:
operation = message_pb2.Request()
operation.n1 = float(raw_input("Digite o primeiro numero"))
op = raw_input("digite a operacao")
operation.n2 = float(raw_input("Digite o segundo numero"))
resposta = message_pb2.Reply()
if op == "+":
operation.op = message_pb2.Request.SOM
elif op == "-":
operation.op = message_pb2.Request.SUB
elif op == "*":
operation.op = message_pb2.Request.MUL
elif op == "/":
operation.op = message_pb2.Request.DIV
net.sendto(operation.SerializeToString(), tupla)
data, add = net.recvfrom(1024)
resposta.ParseFromString(data)
print(resposta.res)
def main():
net = socket.socket(socket.AF_INET,socket.SOCK_DGRAM)
while True:
operation = message_pb2.Request()
operation.n1 = float(raw_input("Digite o primeiro numero"))
op = raw_input("digite a operacao")
operation.n2 = float(raw_input("Digite o segundo numero"))
resposta = message_pb2.Reply()
if op == "+":
operation.op=message_pb2.Request.SOM
elif op == "-" :
operation.op=message_pb2.Request.SUB
elif op == "*":
operation.op=message_pb2.Request.MUL
elif op == "/":
operation.op=message_pb2.Request.DIV
net.sendto(operation.SerializeToString(),("localhost",8000))
data, add = net.recvfrom(1024)
resposta.ParseFromString(data)
print (resposta.res);
def main():
global transmission_time, sent_goodput, received_goodput, temp_trans_fog
cfgs = [192, 160, 96, 'M', 192, 192, 192,'A', 192, 192, 12, 'A']
kernel_filters = [5,1,1,3,5,1,1,3,3,1,1,8]
stride = [1,1,1,2,1,1,1,2,1,1,1,1]
padding = [2,0,0,1,2,0,0,1,1,0,0,0]
model = torch.load("/home/arnab/Desktop/Data/nin.pt", map_location=torch.device('cpu'))
models = {1:"AlexNet",2:"ResNet34",3:"VGG16",4:"NiN"}
m = input("Enter Model Number [1: AlexNet 2: ResNet34 3: VGG16 4: NiN]: ")
pretrained_model = models[int(m)]
MAX_MESSAGE_LENGTH = 104857600 # 100MB
# load model keylist
model_list = create_model_list(model)
model_dict = create_model_dict(cfgs,model_list,kernel_filters,stride,padding)
try:
# write file in csv format
csv_file = open('/home/arnab/Desktop/DNN/gRPC/logs/gRPC_time_state_nin_cpu_match_part.csv','a')
fieldnames = ['layer', 'transmission_time', 'transmission_data', 'computation_time']
writer = csv.DictWriter(csv_file, fieldnames=fieldnames)
writer.writeheader()
# initialize variable
current_layer = None
img_part_list = []
classify_list = []
prev_input_units = 0
total_transmission_time = 0
final_out = None
# swap matching algorithm
matching = match.Matching()
matched_fog_node_CA_idx = matching.F_CA.index(max(matching.F_CA))
print(f"matched_fog_node_CA_idx: {matched_fog_node_CA_idx}")
matching.DNN_inference_offloading_swap_matching()
matched_fog_node = matching.rand_match[0][1] # one user matched with one best fog node.
matched_fog_node = matched_fog_node + ":50051"
# create a channel and a stub (client)
channel = grpc.insecure_channel(matched_fog_node,
options=[
('grpc.max_send_message_length', MAX_MESSAGE_LENGTH),
('grpc.max_receive_message_length', MAX_MESSAGE_LENGTH),],)
stub = message_pb2_grpc.CalculatorStub(channel)
# load dataset
userObject = user.User(pretrained_model=pretrained_model,CA=matching.F_CA)
BATCH_SIZE = userObject.BATCH_SIZE
worker = userObject.worker
loader = userObject.image_loader()
reset(worker) # reset transmission_latency, computation_latency, transmission_data_size
epoch = 0
for img,level in loader:
print(f"Epoch: {epoch}")
for i in range(len(cfgs)):
current_layer = i
if i == 0:
input_ = img
channel = input_.shape[1]
else:
input_ = final_out
channel = input_.shape[1]
after_part = userObject.partition_algorithm("conv", input_, f=kernel_filters[current_layer])
for j in range(len(after_part)):
img_part = adaptive_partitioning(input_,after_part[j]) # partitioned image
sent_goodput[j][current_layer] = img_part.element_size() * img_part.nelement() # goodput
if j == matched_fog_node_CA_idx:
msg = send_message("conv", img_part, after_part[j], BATCH_SIZE, current_layer, epoch, pretrained_model, 0)
out = message_pb2.Request(message=msg)
r = stub.Node(out)
img_part = received_message(r.message,current_layer,j)
img_part_list.append(img_part)
else:
s = time.time()
img_part = nin.nn_layer('conv', img_part, current_layer, model, 0, model_dict)
e = time.time()
layer_comp_time = (e-s)*1000
img_part_list.append(img_part)
received_goodput[j][current_layer] = img_part.element_size() * img_part.nelement() # goodput
total_data = (sent_goodput[j][current_layer]+received_goodput[j][current_layer])/(1024*1024)
set_value(current_layer, 0, sent_goodput[j][current_layer]/(1024*1024), layer_comp_time)
if len(img_part_list) == 1:
final_out = img_part
else:
final_out = torch.cat((final_out,img_part),2)
if len(img_part_list) == worker:
img_part_list = []
print("\tAfter Marge: " + str(final_out.size()))
total_transmission_time += transmission_time/worker
print(f"total_transmission_time: {total_transmission_time}")
transmission_time = 0
# Adaptive average Pool
avgpool = nn.AdaptiveAvgPool2d((1, 1))
final_out = avgpool(final_out)
final_out = torch.flatten(final_out,1)
m = nn.ReLU()
final_out = m(final_out).data > 0
final_out = final_out.int()
print(f"Final Result: {final_out}")
print(f"Transmission time (one node): {total_transmission_time}")
transmission_time = 0
total_transmission_time = 0
epoch += 1
if epoch == 1:
write_to_file(epoch, writer, worker)
break
except Exception as e:
print("main:ERROR")
print(e)
def main():
global transmission_time, sent_goodput, received_goodput
models = {1:"AlexNet",2:"ResNet34",3:"VGG16",4:"NiN"}
m = input("Enter Model Number [1: AlexNet 2: ResNet34 3: VGG16 4: NiN]: ")
pretrained_model = models[int(m)]
MAX_MESSAGE_LENGTH = 104857600 # 100MB
try:
# write file in csv format
csv_file = open('/home/arnab/Desktop/DNN/gRPC/logs/gRPC_time_state_vgg16_cpu_greedy_part.csv','a')
fieldnames = ['layer', 'transmission_time', 'transmission_data', 'computation_time']
writer = csv.DictWriter(csv_file, fieldnames=fieldnames)
writer.writeheader()
# initialize variable
current_layer = None
img_part_list = []
classify_list = []
prev_input_units = 0
total_transmission_time = 0
final_out = None
num_layers = 19 # 13 conv layers, 5 maxpool layers and 1 sequential fc layers
# swap matching algorithm
matching = match.Matching()
greedy_random_match = matching.greedy_random_match()
print(f"Greedy Random Match: {greedy_random_match}")
matched_fog_node = greedy_random_match[0][1] # one user matched with one best fog node.
matched_fog_node = matched_fog_node + ":50051"
# create a channel and a stub (client)
channel = grpc.insecure_channel(matched_fog_node,
options=[
('grpc.max_send_message_length', MAX_MESSAGE_LENGTH),
('grpc.max_receive_message_length', MAX_MESSAGE_LENGTH),],)
stub = message_pb2_grpc.CalculatorStub(channel)
# load dataset
userObject = user.User(pretrained_model=pretrained_model, CA=matching.F_CA)
BATCH_SIZE = userObject.BATCH_SIZE
worker = userObject.worker
loader = userObject.image_loader()
reset() # reset transmission_latency, computation_latency, transmission_data_size
epoch = 0
for img,level in loader:
print(f"Epoch: {epoch}")
# One user matches with one fog node (NO PARTITION)
for layer in range(num_layers):
current_layer = layer
if current_layer == 0:
input_ = img
channel = input_.shape[1]
else:
input_ = final_out
channel = input_.shape[1]
if current_layer < 18:
sent_goodput[current_layer] = input_.element_size() * input_.nelement() # goodput
msg = send_message("conv", input_ , 0 , BATCH_SIZE, current_layer, epoch, pretrained_model, 0)
out = message_pb2.Request(message=msg)
r = stub.Node(out)
img_part = received_message(r.message, current_layer)
final_out = img_part
total_transmission_time += transmission_time
transmission_time = 0
else:
# Adaptive average Pool
avgpool = nn.AdaptiveAvgPool2d((7, 7))
out = avgpool(final_out)
input_ = out
channel = input_.shape[1]
sent_goodput[current_layer] = input_.element_size() * input_.nelement() # goodput
msg = send_message("ff", input_, 0, BATCH_SIZE, current_layer, epoch, pretrained_model, prev_input_units)
out = message_pb2.Request(message=msg)
r = stub.Node(out)
img_part = received_message(r.message, current_layer)
final_out = img_part
total_transmission_time += transmission_time
print(f"Final_out: {final_out}")
print(f"total_transmission_time: {total_transmission_time}")
transmission_time = 0
total_transmission_time = 0
epoch += 1
if epoch == 1:
write_to_file(epoch, writer, 1)
break
except Exception as e:
print("main:ERROR")
print(e)
def main():
global transmission_time, sent_goodput, received_goodput, temp_trans_fog
cfgs = [192, 160, 96, 'M', 192, 192, 192, 'A', 192, 192, 12, 'A']
kernel_filters = [5, 1, 1, 3, 5, 1, 1, 3, 3, 1, 1, 8]
models = {1: "AlexNet", 2: "ResNet34", 3: "VGG16", 4: "NiN"}
m = input("Enter Model Number [1: AlexNet 2: ResNet34 3: VGG16 4: NiN]: ")
pretrained_model = models[int(m)]
CA = [4.0, 6.0] # capability temporary
MAX_MESSAGE_LENGTH = 104857600 # 100MB
try:
# write file in csv format
csv_file = open(
'/home/arnab/Desktop/DNN/gRPC/logs/gRPC_time_state_nin_cpu_random_part.csv',
'a')
fieldnames = [
'layer', 'transmission_time', 'transmission_data',
'computation_time'
]
writer = csv.DictWriter(csv_file, fieldnames=fieldnames)
writer.writeheader()
# initialize variable
current_layer = None
img_part_list = []
classify_list = []
prev_input_units = 0
total_transmission_time = 0
final_out = None
# create a channel and a stub (client)
channel1 = grpc.insecure_channel(
'192.168.0.106:50051',
options=[
('grpc.max_send_message_length', MAX_MESSAGE_LENGTH),
('grpc.max_receive_message_length', MAX_MESSAGE_LENGTH),
],
)
channel2 = grpc.insecure_channel(
'192.168.0.107:50051',
options=[
('grpc.max_send_message_length', MAX_MESSAGE_LENGTH),
('grpc.max_receive_message_length', MAX_MESSAGE_LENGTH),
],
)
# create a stub (client)
stub1 = message_pb2_grpc.CalculatorStub(channel1)
stub2 = message_pb2_grpc.CalculatorStub(channel2)
userObject = user.User(pretrained_model=pretrained_model, CA=CA)
BATCH_SIZE = userObject.BATCH_SIZE
worker = userObject.worker
loader = userObject.image_loader()
# load dataset
CA = [float(x) for x in np.random.randint(1, 10, size=2)
] # CA temporary size=worker
print(f"CA: {CA}")
userObject = user.User(pretrained_model=pretrained_model, CA=CA)
BATCH_SIZE = userObject.BATCH_SIZE
worker = userObject.worker
loader = userObject.image_loader()
reset(
worker
) # reset transmission_latency, computation_latency, transmission_data_size
epoch = 0
for img, level in loader:
print(f"Epoch: {epoch}")
for i in range(len(cfgs)):
current_layer = i
if i == 0:
input_ = img
channel = input_.shape[1]
else:
input_ = final_out
channel = input_.shape[1]
after_part = userObject.partition_algorithm(
"conv", input_, f=kernel_filters[current_layer])
for j in range(len(after_part)):
print(f"Conv: partition: {after_part[j]}")
img_part = adaptive_partitioning(
input_, after_part[j]) # partitioned image
sent_goodput[j][current_layer] = img_part.element_size(
) * img_part.nelement() # goodput
msg = send_message("conv", img_part, after_part[j],
BATCH_SIZE, current_layer, epoch,
pretrained_model, 0)
out = message_pb2.Request(message=msg)
if j == 0:
r = stub1.Node(out)
img_part = received_message(r.message, current_layer,
j)
img_part_list.append(img_part)
elif j == 1:
r = stub2.Node(out)
img_part = received_message(r.message, current_layer,
j)
img_part_list.append(img_part)
if len(img_part_list) == 1:
final_out = img_part
else:
final_out = torch.cat((final_out, img_part), 2)
if len(img_part_list) == worker:
img_part_list = []
print("\tAfter Marge: " + str(final_out.size()))
total_transmission_time += transmission_time / worker
print(
f"total_transmission_time: {total_transmission_time}")
transmission_time = 0
# Adaptive average Pool
avgpool = nn.AdaptiveAvgPool2d((1, 1))
final_out = avgpool(final_out)
final_out = torch.flatten(final_out, 1)
m = nn.ReLU()
final_out = m(final_out).data > 0
final_out = final_out.int()
print(f"Final Result: {final_out}")
print(f"Transmission time (one node): {total_transmission_time}")
transmission_time = 0
total_transmission_time = 0
epoch += 1
if epoch == 1:
write_to_file(epoch, writer, worker)
break
except Exception as e:
print("main:ERROR")
print(e)
def main():
global transmission_time, transmission_latency, computation_latency, transmission_data_size, temp_trans, temp_layer_comp, temp_total_data, sent_goodput, received_goodput
model = torch.load("/home/arnab/Desktop/Data/alexnet.pt", map_location=torch.device('cpu'))
models = {1:"AlexNet",2:"ResNet34",3:"VGG16",4:"NiN"}
m = input("Enter Model Number [1: AlexNet 2: ResNet34 3: VGG16 4: NiN]: ")
pretrained_model = models[int(m)]
try:
# write file in csv format
csv_file = open('/home/arnab/Desktop/DNN/gRPC/logs/gRPC_time_state_alexnet_cpu_match_part.csv','a')
fieldnames = ['layer', 'transmission_time', 'transmission_data', 'computation_time']
writer = csv.DictWriter(csv_file, fieldnames=fieldnames)
writer.writeheader()
# initialize variables
current_layer = None
img_part_list = []
classify_list = []
prev_input_units = 0
total_transmission_time = 0
final_out = None
num_layers = 6
# swap matching algorithm
matching = match.Matching()
matched_fog_node_CA_idx = matching.F_CA.index(max(matching.F_CA))
print(f"matched_fog_node_CA_idx: {matched_fog_node_CA_idx}")
matching.DNN_inference_offloading_swap_matching()
matched_fog_node = matching.rand_match[0][1] # one user matched with one best fog node.
matched_fog_node = matched_fog_node + ":50051"
# create a channel and a stub (client)
channel1 = grpc.insecure_channel(matched_fog_node)
stub1 = message_pb2_grpc.CalculatorStub(channel1)
# load dataset
userObject = user.User(pretrained_model=pretrained_model, CA=matching.F_CA)
BATCH_SIZE = userObject.BATCH_SIZE
worker = userObject.worker
loader = userObject.image_loader()
reset(worker) # reset transmission_latency, computation_latency, transmission_data_size
epoch = 0
for img,level in loader:
prev_input_units = 0
print(f"Epoch: {epoch}")
# One user matches with one fog node (PARTITION: one part in user, another part in fog node)
for i,k in enumerate(userObject.kernel_filters):
current_layer = i
if i == 0:
input_ = img
channel = input_.shape[1]
else:
input_ = final_out
channel = input_.shape[1]
after_part = userObject.partition_algorithm("conv", input_, f=k)
for j in range(len(after_part)):
img_part = adaptive_partitioning(input_, after_part[j]) # partitioned image
sent_goodput[j][current_layer] = img_part.element_size() * img_part.nelement() # goodput
if j == matched_fog_node_CA_idx:
msg = send_message("conv", img_part, after_part[j], BATCH_SIZE, current_layer, epoch, pretrained_model, 0)
out = message_pb2.Request(message=msg)
r = stub1.Node(out)
img_part = received_message(r.message, current_layer, j) # goodput
img_part_list.append(img_part)
else:
s = time.time()
img_part = alexnet.nn_layer("conv", img_part, current_layer, model, 0)
e = time.time()
layer_comp_time = (e-s)*1000
img_part_list.append(img_part)
received_goodput[j][current_layer] = img_part.element_size() * img_part.nelement() # goodput
total_data = (sent_goodput[j][current_layer]+received_goodput[j][current_layer])/(1024*1024)
set_value(current_layer, 0, total_data, layer_comp_time)
if len(img_part_list) == 1:
final_out = img_part
else:
final_out = torch.cat((final_out,img_part),2)
if len(img_part_list) == worker:
img_part_list = []
print("\tAfter Marge: " + str(final_out.size()))
total_transmission_time += transmission_time
print(f"Current Conv Layer: {current_layer} total_transmission_time: {total_transmission_time}")
transmission_time = 0
# Adaptive average Pool
avgpool = nn.AdaptiveAvgPool2d((6, 6))
out = avgpool(final_out)
input_ = out
channel = input_.shape[1]
current_layer += 1
after_part = userObject.partition_algorithm("ff", input_, f=0)
for j in range(len(after_part)):
img_part = adaptive_partitioning(input_,after_part[j])
flat_img = torch.flatten(img_part,1)
sent_goodput[j][current_layer] = img_part.element_size() * img_part.nelement() # goodput
if j == matched_fog_node_CA_idx:
msg = send_message("ff", img_part, after_part[j], BATCH_SIZE, current_layer, epoch, pretrained_model, prev_input_units)
prev_input_units = flat_img.shape[1]
out = message_pb2.Request(message=msg)
r = stub1.Node(out)
img_part = received_message(r.message, current_layer, j) # goodput
classify_list.append(img_part)
else:
s = time.time()
img_part = alexnet.nn_layer("ff", img_part, current_layer, model, prev_input_units)
e = time.time()
layer_comp_time = (e-s)*1000
prev_input_units = flat_img.shape[1]
m = nn.ReLU()
out = m(img_part).data > 0
out = out.int()
classify_list.append(out)
received_goodput[j][current_layer] = img_part.element_size() * img_part.nelement() # goodput
total_data = (sent_goodput[j][current_layer]+received_goodput[j][current_layer])/(1024*1024)
set_value(current_layer, 0, total_data, layer_comp_time)
if len(classify_list) == worker:
classify_final = None
for i in range(len(classify_list)-1):
if i == 0:
classify_final = np.bitwise_or(classify_list[i].numpy()[:], classify_list[i+1].numpy()[:])
else:
classify_final = np.bitwise_or(classify_final,classify_list[i+1].numpy()[:])
classify_list = []
prev_input_units = 0 # for fc layer
total_transmission_time += transmission_time
print(f"total_transmission_time: {total_transmission_time}")
print(f"Transmission time (one node): {total_transmission_time}")
transmission_time = 0
total_transmission_time = 0
epoch += 1
if epoch == 1:
write_to_file(epoch, writer, worker)
break
except Exception as e:
print("main:ERROR")
print(e)
def main():
global transmission_time, sent_goodput, received_goodput, temp_trans_fog
cfgs = [64, 64, 'M', 128, 128, 'M', 256, 256, 256, 'M', 512, 512, 512, 'M', 512, 512, 512, 'M']
models = {1:"AlexNet",2:"ResNet34",3:"VGG16",4:"NiN"}
m = input("Enter Model Number [1: AlexNet 2: ResNet34 3: VGG16 4: NiN]: ")
pretrained_model = models[int(m)]
CA = [4.0, 6.0] # capability temporary
MAX_MESSAGE_LENGTH = 104857600 # 100MB
try:
# write file in csv format
csv_file = open('/home/arnab/Desktop/DNN/gRPC/logs/gRPC_time_state_vgg16_cpu_random_part.csv','a')
fieldnames = ['layer', 'transmission_time', 'transmission_data', 'computation_time']
writer = csv.DictWriter(csv_file, fieldnames=fieldnames)
writer.writeheader()
# initialize variable
current_layer = None
img_part_list = []
classify_list = []
prev_input_units = 0
total_transmission_time = 0
final_out = None
# create a channel and a stub (client)
channel1 = grpc.insecure_channel('192.168.0.106:50051',
options=[
('grpc.max_send_message_length', MAX_MESSAGE_LENGTH),
('grpc.max_receive_message_length', MAX_MESSAGE_LENGTH),],)
channel2 = grpc.insecure_channel('192.168.0.107:50051',
options=[
('grpc.max_send_message_length', MAX_MESSAGE_LENGTH),
('grpc.max_receive_message_length', MAX_MESSAGE_LENGTH),],)
# create a stub (client)
stub1 = message_pb2_grpc.CalculatorStub(channel1)
stub2 = message_pb2_grpc.CalculatorStub(channel2)
# load dataset
userObject = user.User(pretrained_model=pretrained_model, CA=CA)
BATCH_SIZE = userObject.BATCH_SIZE
worker = userObject.worker
loader = userObject.image_loader()
reset(worker) # reset transmission_latency, computation_latency, transmission_data_size
epoch = 0
for img,level in loader:
print(f"Epoch: {epoch}")
for i in range(len(cfgs)):
current_layer = i
print(f"Current: {current_layer}")
if i == 0:
input_ = img
channel = input_.shape[1]
else:
input_ = final_out
channel = input_.shape[1]
after_part = userObject.random_partition(input_,userObject.kernel_filters)
for j in range(len(after_part)):
img_part = adaptive_partitioning(input_,after_part[j]) # partitioned image
sent_goodput[j][current_layer] = img_part.element_size() * img_part.nelement() # goodput
msg = send_message("conv", img_part, after_part[j], BATCH_SIZE, current_layer, epoch, pretrained_model, 0)
out = message_pb2.Request(message=msg)
if j == 0:
r = stub1.Node(out)
img_part = received_message(r.message,current_layer,j)
img_part_list.append(img_part)
elif j == 1:
r = stub2.Node(out)
img_part = received_message(r.message,current_layer,j)
img_part_list.append(img_part)
if len(img_part_list) == 1:
final_out = img_part
else:
final_out = torch.cat((final_out,img_part),2)
if len(img_part_list) == worker:
img_part_list = []
print("\tAfter Marge: " + str(final_out.size()))
total_transmission_time += transmission_time/worker
print(f"Current Conv Layer: {current_layer} total_transmission_time: {total_transmission_time}")
transmission_time = 0
# Adaptive average Pool
avgpool = nn.AdaptiveAvgPool2d((7, 7))
out = avgpool(final_out)
input_ = out
channel = input_.shape[1]
current_layer += 1
after_part = userObject.random_partition(input_, 1)
for j in range(len(after_part)):
img_part = adaptive_partitioning(input_,after_part[j])
flat_img = torch.flatten(img_part,1)
sent_goodput[j][current_layer] = img_part.element_size() * img_part.nelement() # goodput
msg = send_message("ff", img_part, after_part[j], BATCH_SIZE, current_layer, epoch, pretrained_model, prev_input_units)
prev_input_units = flat_img.shape[1]
out = message_pb2.Request(message=msg)
if j == 0:
r = stub1.Node(out)
img_part = received_message(r.message,current_layer,j)
classify_list.append(img_part)
elif j == 1:
r = stub2.Node(out)
img_part = received_message(r.message,current_layer,j)
classify_list.append(img_part)
if len(classify_list) == worker:
classify_final = None
for i in range(len(classify_list)-1):
if i == 0:
classify_final = np.bitwise_or(classify_list[i].numpy()[:], classify_list[i+1].numpy()[:])
else:
classify_final = np.bitwise_or(classify_final,classify_list[i+1].numpy()[:])
classify_list = []
prev_input_units = 0 # for fc layer
total_transmission_time += transmission_time/worker
print(f"total_transmission_time: {total_transmission_time}")
print(f"Transmission time (one node): {total_transmission_time}")
transmission_time = 0
total_transmission_time = 0
epoch += 1
if epoch == 1:
write_to_file(epoch, writer, worker)
break
except Exception as e:
print("main:ERROR")
print(e)
def main():
global transmission_time, sent_goodput, received_goodput, temp_trans_fog
cfgs = [(64,6), (64,12), (64,12), (64,12), (128,18,2), (128,12), (128,12), (128,12), (256,18,2), (256,12), (256,12), (256,12), (256,12), (256,12), (512,18,2), (512,12), (512,12)]
models = {1:"AlexNet",2:"ResNet34",3:"VGG16"}
m = input("Enter Model Number [1: AlexNet 2: ResNet34 3: VGG16]: ")
pretrained_model = models[int(m)]
CA = [4.0, 6.0] # capability temporary
MAX_MESSAGE_LENGTH = 104857600 # 100MB
# open a gRPC channel
try:
# write file in csv format
#csv_file = open('/home/arnab/Desktop/DNN/gRPC/logs/gRPC_time_state_vgg16_cpu.csv','a')
csv_file1 = open('/home/arnab/Desktop/DNN/gRPC/logs/gRPC_time_state_resnet_cpu_node_1.csv','a')
csv_file2 = open('/home/arnab/Desktop/DNN/gRPC/logs/gRPC_time_state_resnet_cpu_node_2.csv','a')
fieldnames = ['layer', 'transmission_time', 'transmission_data', 'computation_time']
writer1 = csv.DictWriter(csv_file1, fieldnames=fieldnames)
writer1.writeheader()
writer2 = csv.DictWriter(csv_file2, fieldnames=fieldnames)
writer2.writeheader()
channel1 = grpc.insecure_channel('192.168.0.106:50051',
options=[
('grpc.max_send_message_length', MAX_MESSAGE_LENGTH),
('grpc.max_receive_message_length', MAX_MESSAGE_LENGTH),],)
channel2 = grpc.insecure_channel('192.168.0.107:50051',
options=[
('grpc.max_send_message_length', MAX_MESSAGE_LENGTH),
('grpc.max_receive_message_length', MAX_MESSAGE_LENGTH),],)
# create a stub (client)
stub1 = message_pb2_grpc.CalculatorStub(channel1)
stub2 = message_pb2_grpc.CalculatorStub(channel2)
current_layer = None
kernel_filters = None
img_part_list = []
classify_list = []
prev_input_units = 0
total_transmission_time = 0
final_out = None
userObject = user.User(pretrained_model=pretrained_model,CA=CA)
BATCH_SIZE = userObject.BATCH_SIZE
worker = userObject.worker
loader = userObject.image_loader()
epoch = 0
for img,level in loader:
print(f"Epoch: {epoch}")
logging.info(f"Epoch: {epoch}\n")
for i in range(len(cfgs)):
current_layer = i
print(f"Current Conv Layer: {current_layer}\n")
if i == 0:
input_ = img
channel = input_.shape[1]
kernel_filters = 7
else:
input_ = final_out
channel = input_.shape[1]
kernel_filters = 3
after_part = userObject.partition_algorithm("conv", input_, f=kernel_filters)
for j in range(len(after_part)):
img_part = adaptive_partitioning(input_,after_part[j]) # partitioned image
sent_goodput[j][current_layer] = img_part.element_size() * img_part.nelement() # goodput
msg = send_message("conv", img_part, after_part[j], BATCH_SIZE, current_layer, epoch, pretrained_model, 0)
out = message_pb2.Request(message=msg)
if j == 0:
r = stub1.Node(out)
img_part = received_message(r.message,current_layer,j,writer1) # goodput
img_part_list.append(img_part)
elif j == 1:
r = stub2.Node(out)
img_part = received_message(r.message,current_layer,j,writer2) # goodput
img_part_list.append(img_part)
if len(img_part_list) == 1:
final_out = img_part
else:
final_out = torch.cat((final_out,img_part),2)
if len(img_part_list) == worker:
img_part_list = []
print("\tAfter Marge: " + str(final_out.size()))
total_transmission_time += transmission_time/worker
print(f"total_transmission_time: {total_transmission_time}")
transmission_time = 0
#break # first conv layer
# Adaptive average Pool
avgpool = nn.AdaptiveAvgPool2d((1, 1))
out = avgpool(final_out)
input_ = out
channel = input_.shape[1]
current_layer += 1 # goodput
#after_part = userObject.partition_algorithm("ff", input_, f=0)
print(f"\nCurrent Fc layer: {current_layer}")
for j in range(worker):
img_part = input_
#img_part = adaptive_partitioning(input_,after_part[j])
#flat_img = torch.flatten(img_part,1)
#print(f"img_part: {img_part.size()} in bytes: {img_part.element_size() * img_part.nelement()}")
sent_goodput[j][current_layer] = img_part.element_size() * img_part.nelement() # goodput
msg = send_message("ff", img_part, 0, BATCH_SIZE, current_layer, epoch, pretrained_model, 0)
out = message_pb2.Request(message=msg)
#prev_input_units = flat_img.shape[1]
if j == 0:
r = stub1.Node(out)
img_part = received_message(r.message,current_layer,j,writer1) # goodput
classify_list.append(img_part)
elif j == 1:
r = stub2.Node(out)
img_part = received_message(r.message,current_layer,j,writer2) # goodput
classify_list.append(img_part)
if len(classify_list) == worker:
classify_final = None
for i in range(len(classify_list)-1):
if i == 0:
classify_final = np.bitwise_or(classify_list[i].numpy()[:], classify_list[i+1].numpy()[:])
else:
classify_final = np.bitwise_or(classify_final,classify_list[i+1].numpy()[:])
classify_list = []
total_transmission_time += transmission_time/worker
print(f"total_transmission_time: {total_transmission_time}")
print(f"Transmission time (one node): {total_transmission_time}")
transmission_time = 0
total_transmission_time = 0
epoch += 1
if epoch == 1:
break
#break # one epoch
except Exception as e:
print("main:ERROR")
print(e)
def main():
global transmission_time, total_computation_time
models = {1: "AlexNet", 2: "ResNet34", 3: "VGG16"}
m = input("Enter Model Number [1: AlexNet 2: ResNet34 3: VGG16]: ")
pretrained_model = models[int(m)]
# open a gRPC channel
try:
# write file in csv format
#csv_file = open('/home/arnab/Desktop/DNN/gRPC/logs/gRPC_time_state_alexnet_cpu.csv','a')
#fieldnames = ['computation_time', 'transmission_time']
#writer = csv.DictWriter(csv_file, fieldnames=fieldnames)
#writer.writeheader()
csv_file1 = open(
'/home/arnab/Desktop/DNN/gRPC/logs/gRPC_time_state_alexnet_cpu_node_1.csv',
'a')
csv_file2 = open(
'/home/arnab/Desktop/DNN/gRPC/logs/gRPC_time_state_alexnet_cpu_node_2.csv',
'a')
fieldnames = [
'layer', 'transmission_time', 'transmission_data',
'computation_time'
]
writer1 = csv.DictWriter(csv_file1, fieldnames=fieldnames)
writer1.writeheader()
writer2 = csv.DictWriter(csv_file2, fieldnames=fieldnames)
writer2.writeheader()
channel1 = grpc.insecure_channel('192.168.0.106:50051')
channel2 = grpc.insecure_channel('192.168.0.107:50051')
# create a stub (client)
stub1 = message_pb2_grpc.CalculatorStub(channel1)
stub2 = message_pb2_grpc.CalculatorStub(channel2)
current_layer = None
img_part_list = []
classify_list = []
prev_input_units = 0
total_transmission_time = 0
final_out = None
userObject = user.User(pretrained_model=pretrained_model)
BATCH_SIZE = userObject.BATCH_SIZE
worker = userObject.worker
loader = userObject.image_loader()
epoch = 0
for img, level in loader:
print(f"Epoch: {epoch}")
for i, k in enumerate(userObject.kernel_filters):
current_layer = i
if i == 0:
input_ = img
channel = input_.shape[1]
else:
input_ = final_out
channel = input_.shape[1]
after_part = userObject.partition_algorithm("conv",
input_,
f=k)
for j in range(len(after_part)):
img_part = adaptive_partitioning(
input_, after_part[j]) # partitioned image
sent_goodput[j][current_layer] = img_part.element_size(
) * img_part.nelement() # goodput
msg = send_message("conv", img_part, after_part[j],
BATCH_SIZE, current_layer, epoch,
pretrained_model, 0)
out = message_pb2.Request(message=msg)
if j == 0:
r = stub1.Node(out)
img_part = received_message(r.message, current_layer,
j, writer1) # goodput
img_part_list.append(img_part)
elif j == 1:
r = stub2.Node(out)
img_part = received_message(r.message, current_layer,
j, writer2) # goodput
img_part_list.append(img_part)
if len(img_part_list) == 1:
final_out = img_part
else:
final_out = torch.cat((final_out, img_part), 2)
if len(img_part_list) == worker:
img_part_list = []
print("\tAfter Marge: " + str(final_out.size()))
total_transmission_time += transmission_time / worker
print(
f"total_transmission_time: {total_transmission_time}")
transmission_time = 0
# Adaptive average Pool
avgpool = nn.AdaptiveAvgPool2d((6, 6))
out = avgpool(final_out)
input_ = out
channel = input_.shape[1]
current_layer += 1
after_part = userObject.partition_algorithm("ff", input_, f=0)
for j in range(len(after_part)):
img_part = adaptive_partitioning(input_, after_part[j])
flat_img = torch.flatten(img_part, 1)
sent_goodput[j][current_layer] = img_part.element_size(
) * img_part.nelement() # goodput
msg = send_message("ff", img_part, after_part[j], BATCH_SIZE,
current_layer, epoch, pretrained_model,
prev_input_units)
prev_input_units = flat_img.shape[1]
out = message_pb2.Request(message=msg)
if j == 0:
r = stub1.Node(out)
img_part = received_message(r.message, current_layer, j,
writer1) # goodput
classify_list.append(img_part)
elif j == 1:
r = stub2.Node(out)
img_part = received_message(r.message, current_layer, j,
writer2) # goodput
classify_list.append(img_part)
if len(classify_list) == worker:
classify_final = None
for i in range(len(classify_list) - 1):
if i == 0:
classify_final = np.bitwise_or(
classify_list[i].numpy()[:],
classify_list[i + 1].numpy()[:])
else:
classify_final = np.bitwise_or(
classify_final, classify_list[i + 1].numpy()[:])
classify_list = []
total_transmission_time += transmission_time / worker
print(f"total_transmission_time: {total_transmission_time}")
#break # first conv layer
logging.info(f"Epoch: {epoch}")
logging.info(
f"Computation time (one node): {total_computation_time/worker}"
)
print(
f"Computation time (one node): {total_computation_time/worker}"
)
logging.info(
f"Transmission time (one node): {total_transmission_time}\n")
print(f"Transmission time (one node): {total_transmission_time}")
#writer.writerow({'computation_time':total_computation_time/worker,'transmission_time':total_transmission_time})
transmission_time = 0
total_computation_time = 0
total_transmission_time = 0
epoch += 1
if epoch == 1:
break
except Exception as e:
print("main:ERROR")
print(e)
"""
