def _sync_clock(self, *args, **kwargs):
"""
sync clock close to a second edge
@throws InstrumentTimeoutException if device respond correctly.
@throws InstrumentProtocolException if command could not be built or misunderstood.
"""
time_format = "%Y/%m/%d %H:%M:%S"
str_val = get_timestamp_delayed(time_format)
log.debug("Setting instrument clock to '%s'", str_val)
self._do_cmd_resp(Command.SET_CLOCK, str_val, expected_prompt=Prompt.CR_NL)
def _sync_clock(self, command, date_time_param, timeout=TIMEOUT, delay=1, time_format="%Y/%m/%d,%H:%M:%S"):
"""
Send the command to the instrument to synchronize the clock
@param command set command
@param date_time_param: date time parameter that we want to set
@param timeout: command timeout
@param delay: wakeup delay
@param time_format: time format string for set command
"""
log.info("SYNCING TIME WITH SENSOR.")
for connection in self.connections:
self._do_cmd_resp(command, date_time_param, get_timestamp_delayed("%Y/%m/%d, %H:%M:%S"),
timeout=timeout, connection=connection)
def _sync_clock(self, command, date_time_param, timeout=TIMEOUT, delay=1, time_format="%d %b %Y %H:%M:%S"):
"""
Send the command to the instrument to synchronize the clock
@param command: command to set6 date time
@param date_time_param: date time parameter that we want to set
@param timeout: command timeout
@param delay: wakeup delay
@param time_format: time format string for set command
@raise: InstrumentProtocolException if command fails
"""
# lets clear out any past data so it doesnt confuse the command
self._linebuf = ''
self._promptbuf = ''
log.debug("Set time format(%s) '%s''", time_format, date_time_param)
str_val = get_timestamp_delayed(time_format)
log.debug("Set time value == '%s'", str_val)
self._do_cmd_resp(command, date_time_param, str_val)
def assert_set_clock(self, time_param, time_override=None, time_format = "%d %b %Y %H:%M:%S", tolerance=DEFAULT_CLOCK_DIFF):
"""
Verify that we can set the clock
@param time_param: driver parameter
@param time_override: use this time instead of current time.
@param time_format: date time format
@param tolerance: how close to the set time should the get be?
"""
# Some seabirds tick the clock the instant you set it. So you set
# time 1, the get would be time 2. Others do it correctly and wait
# for a second before ticking. Hence the default tolerance of 1.
if time_override is None:
set_time = get_timestamp_delayed(time_format)
else:
set_time = time.strftime(time_format, time.localtime(time_override))
self.assert_set(time_param, set_time, no_get=True, startup=True)
self.assertTrue(self._is_time_set(time_param, set_time, time_format, tolerance))
def assert_set_clock(self,
time_param,
time_override=None,
time_format="%d %b %Y %H:%M:%S",
tolerance=DEFAULT_CLOCK_DIFF):
"""
Verify that we can set the clock
@param time_param: driver parameter
@param time_override: use this time instead of current time.
@param time_format: date time format
@param tolerance: how close to the set time should the get be?
"""
# Some seabirds tick the clock the instant you set it. So you set
# time 1, the get would be time 2. Others do it correctly and wait
# for a second before ticking. Hence the default tolerance of 1.
if time_override is None:
set_time = get_timestamp_delayed(time_format)
else:
set_time = time.strftime(time_format,
time.localtime(time_override))
self.assert_set(time_param, set_time, no_get=True, startup=True)
self.assertTrue(
self._is_time_set(time_param, set_time, time_format, tolerance))
def test_parameters(self):
"""
Verify that we can set the parameters
1. Cannot set read only parameters
2. Can set read/write parameters
3. Can set read/write parameters w/direct access only
"""
self.assert_initialize_driver(ProtocolState.COMMAND)
# test read/write parameter
self.assert_set(Parameter.MEASUREMENTS_PER_REPORTED, 20)
# test setting immutable parameters when startup
# NOTE: this does not use the startup config because setting a combination of parameters from their default
# values will cause the instrument to no longer break out of autosample mode. This is a safe way to test
# setting startup params without the risk of going into autosample mode.
self.assert_set(Parameter.MEASUREMENTS_PER_PACKET,
18,
startup=True,
no_get=True)
self.assert_get(Parameter.MEASUREMENTS_PER_PACKET, 18)
self.assert_set(Parameter.PREDEFINED_OUTPUT_SEQ,
3,
startup=True,
no_get=True)
self.assert_get(Parameter.PREDEFINED_OUTPUT_SEQ, 3)
self.assert_set(Parameter.PACKETS_PER_SET,
10,
startup=True,
no_get=True)
self.assert_get(Parameter.PACKETS_PER_SET, 10)
self.assert_set(Parameter.RECORDING_MODE, 1, startup=True, no_get=True)
self.assert_get(Parameter.RECORDING_MODE, 1)
self.assert_set(Parameter.MANUAL_MODE, 1, startup=True, no_get=True)
self.assert_get(Parameter.MANUAL_MODE, 1)
self.assert_set(Parameter.RUN_WIPER_INTERVAL,
'05:00:23',
startup=True,
no_get=True)
self.assert_get(Parameter.RUN_WIPER_INTERVAL, '05:00:23')
self.assert_set(Parameter.RUN_CLOCK_SYNC_INTERVAL,
'12:00:00',
startup=True,
no_get=True)
self.assert_get(Parameter.RUN_CLOCK_SYNC_INTERVAL, '12:00:00')
self.assert_set(Parameter.RUN_ACQUIRE_STATUS_INTERVAL,
'00:00:30',
startup=True,
no_get=True)
self.assert_get(Parameter.RUN_ACQUIRE_STATUS_INTERVAL, '00:00:30')
# test read only parameter (includes immutable, when not startup)- should not be set, value should not change
self.assert_set_exception(Parameter.SERIAL_NUM, '12.123.1234')
self.assert_set_exception(Parameter.FIRMWARE_VERSION, 'VER123')
self.assert_set_exception(Parameter.MEASUREMENTS_PER_PACKET, 16)
self.assert_set_exception(Parameter.MEASUREMENT_1_DARK_COUNT, 10)
self.assert_set_exception(Parameter.MEASUREMENT_2_DARK_COUNT, 20)
self.assert_set_exception(Parameter.MEASUREMENT_3_DARK_COUNT, 30)
self.assert_set_exception(Parameter.MEASUREMENT_1_SLOPE, 12.00)
self.assert_set_exception(Parameter.MEASUREMENT_2_SLOPE, 13.00)
self.assert_set_exception(Parameter.MEASUREMENT_3_SLOPE, 14.00)
self.assert_set_exception(Parameter.PREDEFINED_OUTPUT_SEQ, 0)
self.assert_set_exception(Parameter.BAUD_RATE, 2422)
self.assert_set_exception(Parameter.PACKETS_PER_SET, 0)
self.assert_set_exception(Parameter.RECORDING_MODE, 0)
self.assert_set_exception(Parameter.MANUAL_MODE, 0)
self.assert_set_exception(Parameter.SAMPLING_INTERVAL, "003000")
self.assert_set_exception(Parameter.DATE,
get_timestamp_delayed("%m/%d/%y"))
self.assert_set_exception(Parameter.TIME,
get_timestamp_delayed("%H:%M:%S"))
self.assert_set_exception(Parameter.MANUAL_START_TIME, "15:10:45")
self.assert_set_exception(Parameter.INTERNAL_MEMORY, 512)
self.assert_set_exception(Parameter.RUN_WIPER_INTERVAL, "00:00:00")
self.assert_set_exception(Parameter.RUN_CLOCK_SYNC_INTERVAL,
"00:00:00")
self.assert_set_exception(Parameter.RUN_ACQUIRE_STATUS_INTERVAL,
"00:00:00")
def test_parameters(self):
"""
Verify that we can set the parameters
1. Cannot set read only parameters
2. Can set read/write parameters
3. Can set read/write parameters w/direct access only
"""
self.assert_initialize_driver(ProtocolState.COMMAND)
# test read/write parameter
self.assert_set(Parameter.MEASUREMENTS_PER_REPORTED, 20)
# test setting immutable parameters when startup
# NOTE: this does not use the startup config because setting a combination of parameters from their default
# values will cause the instrument to no longer break out of autosample mode. This is a safe way to test
# setting startup params without the risk of going into autosample mode.
self.assert_set(Parameter.MEASUREMENTS_PER_PACKET, 18, startup=True, no_get=True)
self.assert_get(Parameter.MEASUREMENTS_PER_PACKET, 18)
self.assert_set(Parameter.PREDEFINED_OUTPUT_SEQ, 3, startup=True, no_get=True)
self.assert_get(Parameter.PREDEFINED_OUTPUT_SEQ, 3)
self.assert_set(Parameter.PACKETS_PER_SET, 10, startup=True, no_get=True)
self.assert_get(Parameter.PACKETS_PER_SET, 10)
self.assert_set(Parameter.RECORDING_MODE, 1, startup=True, no_get=True)
self.assert_get(Parameter.RECORDING_MODE, 1)
self.assert_set(Parameter.MANUAL_MODE, 1, startup=True, no_get=True)
self.assert_get(Parameter.MANUAL_MODE, 1)
self.assert_set(Parameter.RUN_WIPER_INTERVAL, '05:00:23', startup=True, no_get=True)
self.assert_get(Parameter.RUN_WIPER_INTERVAL, '05:00:23')
self.assert_set(Parameter.RUN_CLOCK_SYNC_INTERVAL, '12:00:00', startup=True, no_get=True)
self.assert_get(Parameter.RUN_CLOCK_SYNC_INTERVAL, '12:00:00')
self.assert_set(Parameter.RUN_ACQUIRE_STATUS_INTERVAL, '00:00:30', startup=True, no_get=True)
self.assert_get(Parameter.RUN_ACQUIRE_STATUS_INTERVAL, '00:00:30')
# test read only parameter (includes immutable, when not startup)- should not be set, value should not change
self.assert_set_exception(Parameter.SERIAL_NUM, '12.123.1234')
self.assert_set_exception(Parameter.FIRMWARE_VERSION, 'VER123')
self.assert_set_exception(Parameter.MEASUREMENTS_PER_PACKET, 16)
self.assert_set_exception(Parameter.MEASUREMENT_1_DARK_COUNT, 10)
self.assert_set_exception(Parameter.MEASUREMENT_2_DARK_COUNT, 20)
self.assert_set_exception(Parameter.MEASUREMENT_3_DARK_COUNT, 30)
self.assert_set_exception(Parameter.MEASUREMENT_1_SLOPE, 12.00)
self.assert_set_exception(Parameter.MEASUREMENT_2_SLOPE, 13.00)
self.assert_set_exception(Parameter.MEASUREMENT_3_SLOPE, 14.00)
self.assert_set_exception(Parameter.PREDEFINED_OUTPUT_SEQ, 0)
self.assert_set_exception(Parameter.BAUD_RATE, 2422)
self.assert_set_exception(Parameter.PACKETS_PER_SET, 0)
self.assert_set_exception(Parameter.RECORDING_MODE, 0)
self.assert_set_exception(Parameter.MANUAL_MODE, 0)
self.assert_set_exception(Parameter.SAMPLING_INTERVAL, "003000")
self.assert_set_exception(Parameter.DATE, get_timestamp_delayed("%m/%d/%y"))
self.assert_set_exception(Parameter.TIME, get_timestamp_delayed("%H:%M:%S"))
self.assert_set_exception(Parameter.MANUAL_START_TIME, "15:10:45")
self.assert_set_exception(Parameter.INTERNAL_MEMORY, 512)
self.assert_set_exception(Parameter.RUN_WIPER_INTERVAL, "00:00:00")
self.assert_set_exception(Parameter.RUN_CLOCK_SYNC_INTERVAL, "00:00:00")
self.assert_set_exception(Parameter.RUN_ACQUIRE_STATUS_INTERVAL, "00:00:00")