def stop(mn):
global log
if log: sys.stderr.write('Stopping the network...\n')
for s in mn.servers:
if log: sys.stderr.write('Killing web-server in server %s\n' % s.name)
s.cmd('kill %python')
if log: sys.stderr.write('Killing NOX, if any running\n')
run('killall nox_core lt-nox_core')
mn.net.stop()
def stop(mn):
global log
if log: sys.stderr.write('Stopping the network...\n')
for s in mn.servers:
if log: sys.stderr.write('Killing web-server in server %s\n' %
s.name)
s.cmd('kill %python')
if log: sys.stderr.write('Killing NOX, if any running\n')
run('killall nox_core lt-nox_core')
mn.net.stop()
def stop(mn):
global log
if log:
sys.stderr.write("Stopping the network...\n")
for c in mn.clients:
if log:
sys.stderr.write("Killing web-server in server %s\n" % c.name)
c.cmd("kill %python")
if log:
sys.stderr.write("Killing NOX, if any running\n")
run("killall nox_core lt-nox_core")
mn.net.stop()
ip='192.168.1.101/24',
defaultRoute='via 192.168.1.1')
self.addLink(h4, s2)
self.addLink(h5, s2)
if __name__ == '__main__':
info('*** Starting Mininet *** \n')
print '*** Starting Mininet *** \n'
topo = RevocationTopo()
net = Mininet(topo=topo, link=TCLink, controller=RemoteController)
info('*** Topology Created *** \n')
print "***Toplology Created***"
net.start()
run("ovs-vsctl set bridge s1 protocols=OpenFlow13")
info('***attempting to start dhcp server***')
#net.get('dhcp1').cmd('sudo /etc/init.d/isc-dhcp-server start')
#net.get('dhcp1').cmd('sudo wireshark &')
#info('***Starting Wireshark...*** \n')
#raw_input("\nPress Enter once Wireshark is capturing trafic \n")
#info('*** Assigning IP to h1 and h2 (See Wireshark) *** \n')
#net.get('h1').cmd('dhclient')
#net.get('h2').cmd('dhclient')
info('*** Running CLI *** \n')
net.get('nat1').cmd('ifconfig nat1-eth1 192.168.1.1')
print '***Starting CLI *** \n'
CLI(net)
info('*** Stopping Network ***')
def makeIntfPair(intf1,
intf2,
addr1=None,
addr2=None,
node1=None,
node2=None,
deleteIntfs=True,
runCmd=None):
"""Make a veth pair connnecting new interfaces intf1 and intf2
intf1: name for interface 1
intf2: name for interface 2
addr1: MAC address for interface 1 (optional)
addr2: MAC address for interface 2 (optional)
node1: home node for interface 1 (optional)
node2: home node for interface 2 (optional)
deleteIntfs: delete intfs before creating them
runCmd: function to run shell commands (quietRun)
raises Exception on failure"""
if not runCmd:
runCmd = util.quietRun if not node1 else node1.cmd
runCmd2 = util.quietRun if not node2 else node2.cmd
if deleteIntfs:
# Delete any old interfaces with the same names
runCmd('ip link del ' + intf1)
runCmd2('ip link del ' + intf2)
"""cmdOutput = util.run('ip tuntap add %s mode tap' %
(intf1))
if cmdOutput:
raise Exception("Error creating interface pair (%s,%s): %s " %
(intf1, intf2, cmdOutput))
cmdOutput = util.run('ip tuntap add %s mode tap' %
(intf2))
if cmdOutput:
raise Exception("Error creating interface pair (%s,%s): %s " %
(intf1, intf2, cmdOutput))"""
# Create new pair
netns = 1 if not node2 else node2.pid
print(
'\nctapudp -s 0.0.0.0 -p %i -t 127.0.0.1 -k %i -i %s -a 1 -q 127.0.0.1 -r 55554 -e 100\n'
% (makeIntfPair.portscount, makeIntfPair.portscount + 1, intf1))
print(
'\nctapudp -s 0.0.0.0 -p %i -t 127.0.0.1 -k %i -i %s -a 1 -q 127.0.0.1 -r 55554 -e 100\n'
% (makeIntfPair.portscount + 1, makeIntfPair.portscount, intf2))
process = subprocess.Popen([
'ctapudp', '-s', '127.0.0.1', '-p',
str(makeIntfPair.portscount), '-t', '127.0.0.1', '-k',
str(makeIntfPair.portscount + 1), '-i', intf1, '-a', '1', '-q',
'127.0.0.1', '-r', '55554', '-e', '100'
""", '-d', '1'"""
],
preexec_fn=os.setpgrp)
QKLink.processes.append(process)
process = subprocess.Popen([
'ctapudp', '-s', '127.0.0.1', '-p',
str(makeIntfPair.portscount + 1), '-t', '127.0.0.1', '-k',
str(makeIntfPair.portscount), '-i', intf2, '-a', '1', '-q',
'127.0.0.1', '-r', '55554', '-e', '100'
""", '-d', '1'"""
],
preexec_fn=os.setpgrp)
QKLink.processes.append(process)
time.sleep(0.5)
makeIntfPair.portscount = makeIntfPair.portscount + 2
if addr1 is None:
cmdOutput = util.run('ip link set %s ' 'netns %s' % (intf1, node1.pid))
else:
cmdOutput = util.run('ip link set %s address %s '
'netns %s' % (intf1, addr1, node1.pid))
if cmdOutput:
for p in QKLink.processes:
p.kill()
raise Exception("Error creating interface pair (%s,%s): %s " %
(intf1, intf2, cmdOutput))
if addr2 is None:
cmdOutput = util.run('ip link set %s ' 'netns %s' % (intf2, netns))
else:
cmdOutput = util.run('ip link set %s address %s '
'netns %s' % (intf2, addr2, netns))
if cmdOutput:
for p in QKLink.processes:
p.kill()
raise Exception("Error creating interface pair (%s,%s): %s " %
(intf1, intf2, cmdOutput))
ipc = '127.0.0.1'
port = 6633
c = RemoteController('c', ip=ipc, port=port)
net = Mininet(topo=topo, autoSetMacs=True, xterms=False, controller=None ,
host=CPULimitedHost,
link=TCLink)
net.addController(c)
net.start()
# configure switches IP addresses
for switch in net.switches:
n = switchno[switch.name]
s = G.node[n]['name']
ip = G.node[n]['ip'] + '/64'
# switches shall be OpenFlow1.3 to support IPv6
run('ovs-vsctl set bridge ' + s + ' protocols=OpenFlow13')
for intf in switch.intfs.values():
if intf.name != 'lo':
switch.cmd('ip', '-f inet6 addr add', ip, 'dev', intf.name)
for host in net.hosts:
n = hostswitchno[host.name]
ip = G.node[n]['hosts'][host.name]['ip'] + '/64'
for intf in host.intfs.values():
if intf.name != 'lo':
host.cmd('ip', '-f inet6 addr add', ip, 'dev', intf.name)
print "Hosts configured with IPs, switches pointing to simple_rpl_router at %s:%s" % (ipc, port)
CLI(net)
net.stop()
def BwidthTest( lossy=True ):
"Create network and run simple performance test"
topo = TwoSwitchTopo( n=4, lossy=lossy )
net = Mininet( topo=topo,
host=CPULimitedHost, link=TCLink,
autoStaticArp=True )
net.start()
run("ovs-ofctl add-flow s1 in_port=3,actions=output:1 ")
run( "ovs-ofctl add-flow s2 in_port=1,actions=output:4" )
run("ovs-ofctl add-flow s2 in_port=4,actions=output:1")
run("ovs-ofctl add-flow s1 in_port=1,actions=output:3")
run("ovs-ofctl add-flow s1 in_port=3,udp,priority=40000,actions=output:2")
f = open('output.txt','w')
print( "Testing throughput between h1 and h4" )
#Return node(s) with given name(s)
h1, h2, h3, h4 = net.getNodeByName('h1', 'h2','h3','h4')
#Creating a UDP Server on H4
h4.popen("iperf -s -u", shell = True)
#Creating a TCP Server for the long running TCP Process
processC=h4.popen("iperf -s -p 5201 -i 1 -1", shell = True)
processD=h4.popen("iperf -s -p 5202 -i 1", shell = True)
processA = h1.popen("iperf -c 10.0.0.4 -p 5201 -t 120 -i 1 -b 5M", shell=True)
sleep(5)
CLI(net)
print( "Throughput between h1 and h4, bwidth of 2" )
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 2M", shell=True)
stdout, stderr = process.communicate()
#f.write(stdout)
print( stdout)
sleep(10)
print( "Throughput between h1 and h4, bwidth of 4" )
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 4M", shell=True)
stdout, stderr = process.communicate()
print( stdout )
#f.write(stdout)
sleep(5)
print( "Throughput between h1 and h4, bwidth of 6" )
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 6M", shell=True)
stdout, stderr = process.communicate()
print( stdout )
sleep(5)
print( "Throughput between h1 and h4, bwidth of 8" )
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 8M", shell=True)
stdout, stderr = process.communicate()
print( stdout )
sleep(5)
print( "Throughput between h1 and h4, bwidth of 10" )
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 10M", shell=True)
stdout, stderr = process.communicate()
print( stdout )
sleep(5)
print( "Throughput between h1 and h4, bwidth of 12" )
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 12M", shell=True)
stdout, stderr = process.communicate()
print( stdout )
sleep(5)
stdout1, stderr1 = processC.communicate()
print( stdout1 )
f.write(stdout1)
stdout2, stderr2 = processA.communicate()
print( stdout2 )
print ("hello")
net.stop()
def BwidthTest(lossy=True):
"Create network and run simple performance test"
topo = TwoSwitchTopo(n=4, lossy=lossy)
net = Mininet(topo=topo,
host=CPULimitedHost,
link=TCLink,
autoStaticArp=True)
net.start()
run("ovs-ofctl add-flow s1 in_port=3,actions=output:1 ")
run("ovs-ofctl add-flow s2 in_port=1,actions=output:4")
run("ovs-ofctl add-flow s2 in_port=4,actions=output:1")
run("ovs-ofctl add-flow s1 in_port=1,actions=output:3")
run("ovs-ofctl add-flow s1 in_port=3,udp,priority=40000,actions=output:2")
f = open('output.txt', 'w')
print("Testing throughput between h1 and h4")
#Return node(s) with given name(s)
h1, h2, h3, h4 = net.getNodeByName('h1', 'h2', 'h3', 'h4')
#Creating a UDP Server on H4
h4.popen("iperf -s -u", shell=True)
#Creating a TCP Server for the long running TCP Process
processC = h4.popen("iperf -s -p 5201 -i 1 -1", shell=True)
processD = h4.popen("iperf -s -p 5202 -i 1", shell=True)
processA = h1.popen("iperf -c 10.0.0.4 -p 5201 -t 120 -i 1 -b 5M",
shell=True)
sleep(5)
CLI(net)
print("Throughput between h1 and h4, bwidth of 2")
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 2M", shell=True)
stdout, stderr = process.communicate()
#f.write(stdout)
print(stdout)
sleep(10)
print("Throughput between h1 and h4, bwidth of 4")
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 4M", shell=True)
stdout, stderr = process.communicate()
print(stdout)
#f.write(stdout)
sleep(5)
print("Throughput between h1 and h4, bwidth of 6")
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 6M", shell=True)
stdout, stderr = process.communicate()
print(stdout)
sleep(5)
print("Throughput between h1 and h4, bwidth of 8")
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 8M", shell=True)
stdout, stderr = process.communicate()
print(stdout)
sleep(5)
print("Throughput between h1 and h4, bwidth of 10")
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 10M", shell=True)
stdout, stderr = process.communicate()
print(stdout)
sleep(5)
print("Throughput between h1 and h4, bwidth of 12")
process = h1.popen("iperf -u -c 10.0.0.4 -p 5202 -t 10 -b 12M", shell=True)
stdout, stderr = process.communicate()
print(stdout)
sleep(5)
stdout1, stderr1 = processC.communicate()
print(stdout1)
f.write(stdout1)
stdout2, stderr2 = processA.communicate()
print(stdout2)
print("hello")
net.stop()
print "*** Linking h4 and h5 to Rogue NAT ***"
self.addLink(h4, self.nat1, intfName1="nat1-eth1", params1=natParams)
self.addLink(h5, self.nat1, intfName2="nat1-eth2", params2=natParams2)
if __name__ == "__main__":
# info('*** Starting Mininet *** \n')
print "*** Starting Mininet *** \n"
topo = RevocationTopo()
net = Mininet(topo=topo, link=TCLink, controller=RemoteController)
# info('*** Topology Created *** \n')
print "*** Toplology Created*** \n"
net.start()
run("ovs-vsctl set bridge s1 protocols=OpenFlow13")
# info('*** Running CLI *** \n')
print "*** Running CLI *** \n"
# if the nat1-eth2 interface needs to be created, uncomment below line.
# net.get('nat1').cmd('echo "iface nat1-eth2 inet manual" >> /etc/network/interfaces ')
print "*** Assigning IPs to nat1-eth1 and nat1-eth2 ***"
net.get("nat1").cmd("ifconfig nat1-eth1 192.168.1.1")
net.get("nat1").cmd("ifconfig nat1-eth2 192.168.2.1")
##IPTABLE Config
print "*** Configuring IP Tables for nat1 (allowing second interface)."
net.get("nat1").cmd("iptables -P INPUT ACCEPT")
net.get("nat1").cmd("iptables -P OUTPUT ACCEPT")
net.get("nat1").cmd("iptables -P FORWARD DROP")
net.get("nat1").cmd("sysctl net.ipv4.ip_forward=0")
net.get("nat1").cmd(
def makeIntfPair(intf1,
intf2,
addr1=None,
addr2=None,
node1=None,
node2=None,
deleteIntfs=True,
runCmd=None,
isEncrypted=True):
if not runCmd:
runCmd = util.quietRun if not node1 else node1.cmd
runCmd2 = util.quietRun if not node2 else node2.cmd
if deleteIntfs:
# Delete any old interfaces with the same names
runCmd('ip link del ' + intf1)
runCmd2('ip link del ' + intf2)
# Create new pair
netns = 1 if not node2 else node2.pid
addEnc = '-e 100'
if isEncrypted == False:
addEnc = ''
print(
'\nctapudp -s 0.0.0.0 -p %i -t 127.0.0.1 -k %i -i %s -a 1 -q 127.0.0.1 -r 55554 %s\n'
%
(makeIntfPair.portscount, makeIntfPair.portscount + 1, intf1, addEnc))
print(
'\nctapudp -s 0.0.0.0 -p %i -t 127.0.0.1 -k %i -i %s -a 1 -q 127.0.0.1 -r 55554 %s\n'
%
(makeIntfPair.portscount + 1, makeIntfPair.portscount, intf2, addEnc))
if isEncrypted == True:
process = subprocess.Popen([
'ctapudp', '-s', '127.0.0.1', '-p',
str(makeIntfPair.portscount), '-t', '127.0.0.1', '-k',
str(makeIntfPair.portscount + 1), '-i', intf1, '-a', '1', '-q',
'127.0.0.1', '-r', '55554', '-e', '100'
""", '-d', '1'"""
],
preexec_fn=os.setpgrp)
else:
process = subprocess.Popen([
'ctapudp', '-s', '127.0.0.1', '-p',
str(makeIntfPair.portscount), '-t', '127.0.0.1', '-k',
str(makeIntfPair.portscount + 1), '-i', intf1, '-a', '1', '-q',
'127.0.0.1', '-r', '55554'
""", '-d', '1'"""
],
preexec_fn=os.setpgrp)
QKLink.processes.append(process)
if isEncrypted == True:
process = subprocess.Popen([
'ctapudp', '-s', '127.0.0.1', '-p',
str(makeIntfPair.portscount + 1), '-t', '127.0.0.1', '-k',
str(makeIntfPair.portscount), '-i', intf2, '-a', '1', '-q',
'127.0.0.1', '-r', '55554', '-e', '100'
""", '-d', '1'"""
],
preexec_fn=os.setpgrp)
else:
process = subprocess.Popen([
'ctapudp', '-s', '127.0.0.1', '-p',
str(makeIntfPair.portscount + 1), '-t', '127.0.0.1', '-k',
str(makeIntfPair.portscount), '-i', intf2, '-a', '1', '-q',
'127.0.0.1', '-r', '55554'
""", '-d', '1'"""
],
preexec_fn=os.setpgrp)
QKLink.processes.append(process)
time.sleep(0.5)
makeIntfPair.portscount = makeIntfPair.portscount + 2
if addr1 is None:
cmdOutput = util.run('ip link set %s ' 'netns %s' % (intf1, node1.pid))
else:
cmdOutput = util.run('ip link set %s address %s '
'netns %s' % (intf1, addr1, node1.pid))
if cmdOutput:
for p in QKLink.processes:
p.kill()
raise Exception("Error creating interface pair (%s,%s): %s " %
(intf1, intf2, cmdOutput))
if addr2 is None:
cmdOutput = util.run('ip link set %s ' 'netns %s' % (intf2, netns))
else:
cmdOutput = util.run('ip link set %s address %s '
'netns %s' % (intf2, addr2, netns))
if cmdOutput:
for p in QKLink.processes:
p.kill()
raise Exception("Error creating interface pair (%s,%s): %s " %
(intf1, intf2, cmdOutput))
def WifiNet():
"Creation d'un reseau sans fil"
net = Mininet(switch=OVSSwitch)
info('*** Adding controller\n')
net.addController('c0',
controller=RemoteController,
ip='127.0.0.1',
port=6633)
wifi = WifiSegment(standard=ns.wifi.WIFI_PHY_STANDARD_80211g)
wifinodes = []
for n in nodes:
nodename = n.get('name', None)
nodetype = n.get('type', None)
nodemob = n.get('mobility', None)
nodepos = n.get('position', None)
nodevel = n.get('velocity', None)
nodeip = n.get('ip', None)
if nodetype is 'host':
addfunc = net.addHost
color = (255, 0, 0)
elif nodetype is 'switch':
addfunc = net.addSwitch
color = (0, 0, 255)
else:
addfunc = None
if nodename is None or addfunc is None:
continue
if nodetype is 'host':
node = addfunc(nodename, ip=nodeip)
else:
listenPort = n.get('ListenPort', None)
node = addfunc(nodename, ip=nodeip, listenPort=listenPort)
mininet.ns3.setMobilityModel(node, nodemob)
if nodepos is not None:
mininet.ns3.setPosition(node, nodepos[0], nodepos[1], nodepos[2])
if nodevel is not None:
mininet.ns3.setVelocity(node, nodevel[0], nodevel[1], nodevel[2])
wifinodes.append(node)
for wi in wifiintfs:
winodename = wi.get('nodename', None)
witype = wi.get('type', None)
wichannel = wi.get('channel', None)
wissid = wi.get('ssid', None)
wiip = wi.get('ip', None)
if witype is 'sta':
addfunc = wifi.addSta
elif witype is 'ap':
addfunc = wifi.addAp
else:
addfunc = None
if winodename is None or addfunc is None or wichannel is None:
continue
node = getWifiNode(wifinodes, winodename)
tb = addfunc(node, wichannel, wissid)
for cl in csmalinks:
clnodename1 = cl.get('nodename1', None)
clnodename2 = cl.get('nodename2', None)
if clnodename1 is None or clnodename2 is None:
continue
clnode1 = getWifiNode(wifinodes, clnodename1)
clnode2 = getWifiNode(wifinodes, clnodename2)
if clnode1 is None or clnode2 is None:
continue
CSMALink(clnode1, clnode2, DataRate="100Mbps")
#Generation d'un fichier xml pour faire l'animation avec NetAnim
rv = os.path.isdir("/tmp/pcap")
if rv is False:
os.mkdir("/tmp/pcap")
ns.wifi.YansWifiPhyHelper().Default().EnablePcapAll("/tmp/pcap/wifi")
ns.csma.CsmaHelper().EnablePcapAll("/tmp/pcap/csma")
rv = os.path.isdir("/tmp/xml")
if rv is False:
os.mkdir("/tmp/xml")
anim = ns.netanim.AnimationInterface("/tmp/xml/wifi-wired-bridged4.xml")
anim.EnablePacketMetadata(True)
for n in nodes:
anim.UpdateNodeDescription(node.nsNode,
nodename + '-' + str(node.nsNode.GetId()))
anim.UpdateNodeColor(node.nsNode, color[0], color[1], color[2])
info('*** Starting network\n')
net.start()
mininet.ns3.start()
info('*** Liste des STA \n')
for wi in wifiintfs:
winodename = wi.get('nodename', None)
witype = wi.get('type', None)
wichannel = wi.get('channel', None)
if witype is 'sta':
info(winodename, " Channel: ", wichannel, "\n")
info('*** Liste des AP \n')
for wi in wifiintfs:
winodename = wi.get('nodename', None)
witype = wi.get('type', None)
wichannel = wi.get('channel', None)
if witype is 'ap':
info(winodename, " Channel: ", wichannel, "\n")
#info( '*** Testing Network connectivity\n' )
#wifinodes[0].cmdPrint( 'ping 172.31.1.2 -c 3 ' )
# Explicitly enable OpenFlow 1.3, then run the network
run("ovs-vsctl set bridge s1 protocols=OpenFlow13")
CLI(net)
info('*** Stopping network\n')
mininet.ns3.stop()
info('*** mininet.ns3.stop()\n')
mininet.ns3.clear()
info('*** mininet.ns3.clear()\n')
