def accept(self):
"""
This method is invoked when the OK button is pressed. If at least one parameter has been
changed, all text fields are tested for valid input data. Valid data are stored in the
configuration object. If a test fails, a dialog prompts the user for correction.
:return: -
"""
if self.configuration_changed:
# Check if the web browser path entered is valid. If it is not, give an example
# of a valid path.
if not os.path.exists(str(self.input_web_browser_path.text())):
Miscellaneous.show_input_error("Standard web browser",
"/usr/bin/firefox")
return
# Check if the URL entered is valid. If it is not, give an example of a valid URL.
if not Miscellaneous.testipaddress(
str(self.input_indi_server_url.text())):
Miscellaneous.show_input_error("URL of the INDI server",
"localhost")
return
# Check if the float entered is within the given bounds [0., 3.]. If the return value
# is None, an error was detected. In this case give an example for a correct value.
if not Miscellaneous.testfloat(
str(self.input_guiding_interval.text()), 0., 3.):
Miscellaneous.show_input_error("Guide pulse duration", "0.5")
return
# Repeat the same logic for "wait interval".
if not Miscellaneous.testfloat(
str(self.input_wait_interval.text()), 0., 20.):
Miscellaneous.show_input_error("Wait interval", "1.")
return
# Repeat the same logic for "telescope lookup precision".
if not Miscellaneous.testfloat(
str(self.input_telescope_lookup_precision.text()), 0.1,
10.):
Miscellaneous.show_input_error(
"Telescope position lookup precision", "0.5")
return
# Close the editing gui.
self.close()
def accept(self):
"""
This method is invoked when the OK button is pressed. If at least one parameter has been
changed, all text fields are tested for valid input data. Valid data are stored in the
configuration object. If a test fails, a dialog prompts the user for correction.
:return: -
"""
if self.configuration_changed:
# Replace the original value with the corresponding entry in the gui text field.
new_guiding_interval = str(self.input_guiding_interval.text())
# Check if the float entered is within the given bounds [0., 3.]. If the return value
# is None, an error was detected. In this case give an example for a correct value.
if not Miscellaneous.testfloat(new_guiding_interval, 0., 3.):
Miscellaneous.show_input_error("Guiding interval", "0.2")
return
# Repeat the same logic for all parameters.
new_wait_interval = str(self.input_wait_interval.text())
if not Miscellaneous.testfloat(new_wait_interval, 0., 20.):
Miscellaneous.show_input_error("Wait interval", "1.")
return
new_pulse_guide_speed_ra = str(self.input_pulse_guide_speed_ra.text())
if not Miscellaneous.testfloat(new_pulse_guide_speed_ra, 0., 0.1):
Miscellaneous.show_input_error("Pulse guide speed", "0.001")
return
new_pulse_guide_speed_de = str(self.input_pulse_guide_speed_de.text())
if not Miscellaneous.testfloat(new_pulse_guide_speed_de, 0., 0.1):
Miscellaneous.show_input_error("Pulse guide speed", "0.001")
return
new_telescope_lookup_precision = str(self.input_telescope_lookup_precision.text())
if not Miscellaneous.testfloat(new_telescope_lookup_precision, 0.1, 10.):
Miscellaneous.show_input_error("Telescope position lookup precision", "0.5")
return
# Special case driver_name: This one is handled by a gui of the ASCOM platform.
if self.new_driver_name != self.old_driver_name:
self.configuration_changed = True
self.telescope_changed = True
# Close the editing gui.
self.close()
def accept(self):
"""
This method is invoked when the OK button is pressed. If at least one parameter has been
changed, all text fields are tested for valid input data. Valid data are stored in the
configuration object. If a test fails, a dialog prompts the user for correction.
:return: -
"""
if self.configuration_changed:
# Replace the original value with the corresponding entry in the gui text field.
new_pixel_size = str(self.input_pixel_size.text())
# Check if the float entered is within the given bounds [0., 0.02]. If the return value
# is None, an error was detected. In this case give an example for a correct value.
if not Miscellaneous.testfloat(new_pixel_size, 0., 0.02):
Miscellaneous.show_input_error("Pixel size (mm)", "0.00375")
return
else:
# Set the corresponding entry in the configuration object to the valuee ntered.
self.c.conf.set(self.section_name, 'pixel size', new_pixel_size)
# Repeat the same logic for all parameters.
new_pixel_horizontal = str(self.input_pixel_horizontal.text())
if not Miscellaneous.testint(new_pixel_horizontal, 1, 20000):
Miscellaneous.show_input_error("Pixel count horizontal", "1280")
return
else:
self.c.conf.set(self.section_name, 'pixel horizontal', new_pixel_horizontal)
new_pixel_vertical = str(self.input_pixel_vertical.text())
if not Miscellaneous.testint(new_pixel_vertical, 1, 20000):
Miscellaneous.show_input_error("Pixel count vertical", "960")
return
else:
self.c.conf.set(self.section_name, 'pixel vertical', new_pixel_vertical)
new_repetition_count = str(self.input_repetition_count.text())
if not Miscellaneous.testint(new_repetition_count, 1, 10):
Miscellaneous.show_input_error("Repetition count", "3")
return
else:
self.c.conf.set(self.section_name, 'repetition count', new_repetition_count)
new_external_margin_pixel = str(self.input_external_margin.text())
if not Miscellaneous.testint(new_external_margin_pixel, 1, 10000):
Miscellaneous.show_input_error("External margin pixel", "300")
return
else:
self.c.conf.set(self.section_name, 'external margin pixel',
new_external_margin_pixel)
new_tile_overlap_pixel = str(self.input_tile_overlap.text())
if not Miscellaneous.testint(new_tile_overlap_pixel, 1, 5000):
Miscellaneous.show_input_error("Tile overlap pixels", "150")
return
else:
self.c.conf.set(self.section_name, 'tile overlap pixel', new_tile_overlap_pixel)
# Copy all entries of the current camera model into the "Camera" section of the
# configuration object. This section is displayed in the main configuration gui
# under the heading "Camera".
self.c.copy_camera_configuration(self.new_name)
# Close the editing gui.
self.close()
def accept(self):
"""
This method is invoked when the OK button is pressed. If at least one parameter has been
changed, all text fields are tested for valid input data. Valid data are stored in the
configuration object. If a test fails, a dialog prompts the user for correction.
:return: -
"""
if self.configuration_changed:
# Read the new camera name from the corresponding entry in the gui text field.
new_name = str(self.input_camera_name.text())
# Test if there is already a camera with the same name in the configuration object.
if new_name in self.camlist:
Miscellaneous.show_input_error("Brand / Name (duplicate)", "Name not in list")
return
# Test if an empty name (invalid) is given.
elif new_name == '':
Miscellaneous.show_input_error("Brand / Name", "ZWO ASI120MM-S")
return
# Read the value for the new variable from the corresponding gui text field.
new_pixel_size = str(self.input_pixel_size.text())
# Check if the float entered is within the given bounds [0., 0.02]. If the return value
# is None, an error was detected. In this case give an example for a correct value.
if not Miscellaneous.testfloat(new_pixel_size, 0., 0.02):
Miscellaneous.show_input_error("Pixel size (mm)", "0.00375")
return
# Repeat the same logic for all parameters.
new_pixel_horizontal = str(self.input_pixel_horizontal.text())
if not Miscellaneous.testint(new_pixel_horizontal, 1, 20000):
Miscellaneous.show_input_error("Pixel count horizontal", "1280")
return
new_pixel_vertical = str(self.input_pixel_vertical.text())
if not Miscellaneous.testint(new_pixel_vertical, 1, 20000):
Miscellaneous.show_input_error("Pixel count vertical", "960")
return
new_repetition_count = str(self.input_repetition_count.text())
if not Miscellaneous.testint(new_repetition_count, 1, 10):
Miscellaneous.show_input_error("Repetition count", "3")
return
new_external_margin_pixel = str(self.input_external_margin.text())
if not Miscellaneous.testint(new_external_margin_pixel, 1, 10000):
Miscellaneous.show_input_error("External margin pixel", "300")
return
new_tile_overlap_pixel = str(self.input_tile_overlap.text())
if not Miscellaneous.testint(new_tile_overlap_pixel, 1, 5000):
Miscellaneous.show_input_error("Tile overlap pixels", "150")
return
# Create a new section in the configuration object for this camera model and store
# the parameters there.
section_name = 'Camera ' + new_name
self.c.conf.add_section(section_name)
self.c.conf.set(section_name, 'name', new_name)
self.c.conf.set(section_name, 'pixel size', new_pixel_size)
self.c.conf.set(section_name, 'pixel horizontal', new_pixel_horizontal)
self.c.conf.set(section_name, 'pixel vertical', new_pixel_vertical)
self.c.conf.set(section_name, 'repetition count', new_repetition_count)
self.c.conf.set(section_name, 'external margin pixel', new_external_margin_pixel)
self.c.conf.set(section_name, 'tile overlap pixel', new_tile_overlap_pixel)
# Copy all entries of the current camera model into the "Camera" section of the
# configuration object. This section is displayed in the main configuration gui under
# the heading "Camera".
self.c.copy_camera_configuration(new_name)
# Close the input gui.
self.close()
def accept(self):
"""
This method is invoked when the OK button is pressed. If at least one parameter has been
changed, all text fields are tested for valid input data. Valid data are stored in the
configuration object. If a test fails, a dialog prompts the user for correction.
:return: -
"""
if self.configuration_changed:
# Replace the original value with the corresponding entry in the gui text field.
new_pixel_size = str(self.input_pixel_size.text())
# Check if the float entered is within the given bounds [0., 0.02]. If the return value
# is None, an error was detected. In this case give an example for a correct value.
if not Miscellaneous.testfloat(new_pixel_size, 0., 0.02):
Miscellaneous.show_input_error("Pixel size (mm)", "0.00375")
return
else:
# Set the corresponding entry in the configuration object to the valuee ntered.
self.c.conf.set(self.section_name, 'pixel size',
new_pixel_size)
# Repeat the same logic for all parameters.
new_pixel_horizontal = str(self.input_pixel_horizontal.text())
if not Miscellaneous.testint(new_pixel_horizontal, 1, 20000):
Miscellaneous.show_input_error("Pixel count horizontal",
"1280")
return
else:
self.c.conf.set(self.section_name, 'pixel horizontal',
new_pixel_horizontal)
new_pixel_vertical = str(self.input_pixel_vertical.text())
if not Miscellaneous.testint(new_pixel_vertical, 1, 20000):
Miscellaneous.show_input_error("Pixel count vertical", "960")
return
else:
self.c.conf.set(self.section_name, 'pixel vertical',
new_pixel_vertical)
new_repetition_count = str(self.input_repetition_count.text())
if not Miscellaneous.testint(new_repetition_count, 1, 10):
Miscellaneous.show_input_error("Repetition count", "3")
return
else:
self.c.conf.set(self.section_name, 'repetition count',
new_repetition_count)
new_external_margin_pixel = str(self.input_external_margin.text())
if not Miscellaneous.testint(new_external_margin_pixel, 1, 10000):
Miscellaneous.show_input_error("External margin pixel", "300")
return
else:
self.c.conf.set(self.section_name, 'external margin pixel',
new_external_margin_pixel)
new_tile_overlap_pixel = str(self.input_tile_overlap.text())
if not Miscellaneous.testint(new_tile_overlap_pixel, 1, 5000):
Miscellaneous.show_input_error("Tile overlap pixels", "150")
return
else:
self.c.conf.set(self.section_name, 'tile overlap pixel',
new_tile_overlap_pixel)
# Copy all entries of the current camera model into the "Camera" section of the
# configuration object. This section is displayed in the main configuration gui
# under the heading "Camera".
self.c.copy_camera_configuration(self.new_name)
# Close the editing gui.
self.close()
def accept(self):
"""
If the OK button is clicked and the configuration has been changed, test all parameters for
validity. In case an out-of-bound value is entered, open an error correction dialog window.
:return: -
"""
if self.configuration_changed:
# If the tesselation is changed, most of the work done so far has to be repeated.
# If not at begin of execution, ask the user if this is really what he/she wants to do.
if self.initialized and self.tesselation_changed:
# Ask the user for confirmation.
quit_msg = "The configuration change will invalidate the videos recorded so far. " \
"Do you really want to restart the recording workflow?"
reply = QtWidgets.QMessageBox.question(self, 'Message', quit_msg,
QtWidgets.QMessageBox.Yes,
QtWidgets.QMessageBox.No)
# Negative reply: Ignore changed inputs and close the editor.
if reply == QtWidgets.QMessageBox.No:
self.reject()
# Get the input string from the GUI text field.
input_string = str(self.input_longitude.text())
# Test the input value if it is within the allowed interval (here [-360., +360.])
if Miscellaneous.testfloat(input_string, -360., 360.):
self.c.conf.set("Geographical Position", "longitude", input_string)
else:
# The value entered is out of bound, show a valid input value example.
Miscellaneous.show_input_error("Longitude", "7.39720")
return
# Repeat the same logic for the other input fields.
input_string = str(self.input_latitude.text())
if Miscellaneous.testfloat(input_string, -90., 90.):
self.c.conf.set("Geographical Position", "latitude", input_string)
else:
Miscellaneous.show_input_error("Latitude", "50.69190")
return
input_string = str(self.input_elevation.text())
if Miscellaneous.testint(input_string, -100, 9000):
self.c.conf.set("Geographical Position", "elevation", input_string)
else:
Miscellaneous.show_input_error("Elevation", "250")
return
self.c.conf.set("Geographical Position", "timezone",
self.timezone_chooser.currentText())
input_string = str(self.input_ip_address.text())
if Miscellaneous.testipaddress(input_string):
self.c.conf.set("Camera", "ip address", input_string)
else:
Miscellaneous.show_input_error("IP address to access FireCapture", "192.168.0.34")
return
input_string = str(self.input_focal_length.text())
if Miscellaneous.testfloat(input_string, 0., 100000.):
self.c.conf.set("Telescope", "focal length", input_string)
else:
Miscellaneous.show_input_error("Focal length", "4670.")
return
self.c.conf.set("Telescope", "interface type",
str(self.mount_interface_chooser.currentText()))
self.c.conf.set("Workflow", "protocol level", self.protocol_level_chooser.currentText())
self.c.set_protocol_level()
self.c.conf.set("Workflow", "protocol to file",
['True', 'False'][self.protocol_to_file_chooser.currentIndex()])
self.c.conf.set("Workflow", "focus on star",
['True', 'False'][self.focus_on_star_chooser.currentIndex()])
self.c.conf.set("Workflow", "limb first",
['True', 'False'][self.limb_first_chooser.currentIndex()])
self.c.conf.set("Workflow", "camera automation",
['True', 'False'][self.camera_automation_chooser.currentIndex()])
input_string = str(self.input_camera_trigger_delay.text())
if Miscellaneous.testfloat(input_string, 0., 60.):
self.c.conf.set("Workflow", "camera trigger delay", input_string)
else:
Miscellaneous.show_input_error("Camera trigger delay", "10.")
return
input_string = str(self.input_fig_size_horizontal.text())
if Miscellaneous.testfloat(input_string, 2., 25.):
self.c.conf.set("Tile Visualization", "figsize horizontal", input_string)
else:
Miscellaneous.show_input_error("Figure size horizontal", "10.")
return
input_string = str(self.input_fig_size_vertical.text())
if Miscellaneous.testfloat(input_string, 2., 25.):
self.c.conf.set("Tile Visualization", "figsize vertical", input_string)
else:
Miscellaneous.show_input_error("Figure size vertical", "10.")
return
input_string = str(self.input_label_font_size.text())
if Miscellaneous.testint(input_string, 6, 16):
self.c.conf.set("Tile Visualization", "label fontsize", input_string)
else:
Miscellaneous.show_input_error("Font size for labels", "11")
return
input_string = str(self.input_label_shift.text())
if Miscellaneous.testfloat(input_string, 0., 1.):
self.c.conf.set("Tile Visualization", "label shift", input_string)
else:
Miscellaneous.show_input_error("Label shift parameter", "0.8")
return
input_string = str(self.input_min_autoalign_interval.text())
if Miscellaneous.testfloat(input_string, 20., 1800.):
self.c.conf.set("Alignment", "min autoalign interval", input_string)
else:
Miscellaneous.show_input_error("Minimum auto-alignment interval", "120.")
return
input_string = str(self.input_max_autoalign_interval.text())
if Miscellaneous.testfloat(input_string, 30., 3600.):
self.c.conf.set("Alignment", "max autoalign interval", input_string)
else:
Miscellaneous.show_input_error("Maximum auto-alignment interval", "900.")
return
input_string = str(self.input_max_alignment_error.text())
if Miscellaneous.testfloat(input_string, 10., 60.):
self.c.conf.set("Alignment", "max alignment error", input_string)
else:
Miscellaneous.show_input_error("Max alignment error", "30.")
return
if self.ascomeditor_called:
# If the AscomEditor was called, new parameters are already checked for validity.
self.c.conf.set("ASCOM", "guiding interval", self.new_ascom_guiding_interval)
self.c.conf.set("ASCOM", "wait interval", self.new_ascom_wait_interval)
self.c.conf.set("ASCOM", "pulse guide speed RA",
self.new_ascom_pulse_guide_speed_ra)
self.c.conf.set("ASCOM", "pulse guide speed DE",
self.new_ascom_pulse_guide_speed_de)
self.c.conf.set("ASCOM", "telescope lookup precision",
self.new_ascom_telescope_lookup_precision)
self.c.conf.set('ASCOM', 'telescope driver', self.ascomeditor.new_driver_name)
if self.indieditor_called:
# If the IndiEditor was called, copy back the current new values.
self.c.conf.set("INDI", "web browser path", self.new_web_browser_path)
self.c.conf.set("INDI", "server url", self.new_indi_server_url)
self.c.conf.set("INDI", "pulse guide speed index",
self.new_indi_pulse_guide_speed_index)
self.c.conf.set("INDI", "guiding interval", self.new_indi_guiding_interval)
self.c.conf.set("INDI", "wait interval", self.new_indi_wait_interval)
self.c.conf.set("INDI", "telescope lookup precision",
self.new_indi_telescope_lookup_precision)
# All tests passed successfully, and all parameters have been written to the
# configuration object. Close the GUI window.
self.close()