def TestFit(selFrame, scale_size, move_dy):
new_objs = mm.append_objects_from_file(remote, hole_filename)
mm.select_objects(remote, new_objs)
mm.begin_tool(remote, "transform")
mm.set_toolparam(remote, "scale", scale_size)
mm.accept_tool(remote)
(min, max) = mm.get_selected_bounding_box(remote)
mm.begin_tool(remote, "transform")
cur_origin = mm.get_toolparam(remote, "origin")
dy = -((cur_origin[1] - min[1]) + move_dy * 2 / size_x)
rotation = mm.make_matrix_from_axes(selFrame.x, mm.negv3(selFrame.z),
selFrame.y)
mm.set_toolparam(remote, "rotation", rotation)
translate = mm.subv3(selFrame.origin, cur_origin)
translate = mm.addv3(translate, mm.mulv3s(selFrame.z, dy))
mm.set_toolparam(remote, "translation", translate)
mm.accept_tool(remote)
mm.select_objects(remote, [obj_list[0], new_objs[0]])
result = TestIntersection(obj_list[0], new_objs[0])
mm.select_objects(remote, [new_objs[0]])
cmd_D = mmapi.StoredCommands()
cmd_D.AppendSceneCommand_DeleteSelectedObjects()
remote.runCommand(cmd_D)
mm.select_objects(remote, [obj_list[0]])
return not result
def create_ring(selFrame, scale_size):
new_objs = mm.append_objects_from_file(remote, ring_name)
mm.select_objects(remote, new_objs)
mm.begin_tool(remote, "transform")
mm.set_toolparam(remote, "scale", scale_size)
mm.accept_tool(remote)
(min, max) = mm.get_selected_bounding_box(remote)
mm.begin_tool(remote, "transform")
cur_origin = mm.get_toolparam(remote, "origin")
#dy = flag_set_dy*(-((cur_origin[1] - min[1])+move_dy*2/size_x))
rotation = mm.make_matrix_from_axes(selFrame.x, mm.negv3(selFrame.z),
selFrame.y)
mm.set_toolparam(remote, "rotation", rotation)
translate = mm.subv3(selFrame.origin, cur_origin)
#translate = mm.addv3( translate, mm.mulv3s( selFrame.z, dy ) )
mm.set_toolparam(remote, "translation", translate)
mm.accept_tool(remote)
#mm.begin_tool(remote, "duplicate")
#mm.accept_tool(remote)
mm.select_objects(remote, [obj_list[0], new_objs[0]])
mm.begin_tool(remote, "combine")
mm.accept_tool(remote)
return
def create_ring(tar_object, selFrame, scale_size):
new_objs = mm.append_objects_from_file(remote, ring_name)
mm.select_objects(remote, new_objs)
mm.begin_tool(remote, "transform")
mm.set_toolparam(remote, "scale", scale_size)
mm.accept_tool(remote)
(min, max) = mm.get_selected_bounding_box(remote)
mm.begin_tool(remote, "transform")
cur_origin = mm.get_toolparam(remote, "origin")
rotation = mm.make_matrix_from_axes(selFrame.x, mm.negv3(selFrame.z),
selFrame.y)
mm.set_toolparam(remote, "rotation", rotation)
translate = mm.subv3(selFrame.origin, cur_origin)
mm.set_toolparam(remote, "translation", translate)
mm.accept_tool(remote)
mm.select_objects(remote, [tar_object, new_objs[0]])
mm.begin_tool(remote, "combine")
mm.accept_tool(remote)
return
def drill_holes(tar_object, selFrame, filenames, scale_size, move_dy,
flag_set_dy):
new_objs = mm.append_objects_from_file(remote, filenames)
mm.select_objects(remote, new_objs)
mm.begin_tool(remote, "transform")
mm.set_toolparam(remote, "scale", scale_size)
#mm.set_toolparam(remote, "translation", [0,0,0])
mm.accept_tool(remote)
(min, max) = mm.get_selected_bounding_box(remote)
mm.begin_tool(remote, "transform")
cur_origin = mm.get_toolparam(remote, "origin")
dy = flag_set_dy * (-((cur_origin[1] - min[1]) + move_dy * 2 / size_x))
rotation = mm.make_matrix_from_axes(selFrame.x, mm.negv3(selFrame.z),
selFrame.y)
mm.set_toolparam(remote, "rotation", rotation)
translate = mm.subv3(selFrame.origin, cur_origin)
translate = mm.addv3(translate, mm.mulv3s(selFrame.z, dy))
mm.set_toolparam(remote, "translation", translate)
mm.accept_tool(remote)
#mm.begin_tool(remote, "duplicate")
#mm.accept_tool(remote)
mm.select_objects(remote, [tar_object, new_objs[0]])
mm.begin_tool(remote, "difference")
mm.accept_tool(remote)
return
def TestFit(tar_object, selFrame, scale_size, move_dy):
new_objs = mm.append_objects_from_file(remote, hole_filename)
mm.select_objects(remote, new_objs)
mm.begin_tool(remote, "transform")
mm.set_toolparam(remote, "scale", scale_size)
#mm.set_toolparam(remote, "translation", [0,0,0])
mm.accept_tool(remote)
(min, max) = mm.get_selected_bounding_box(remote)
mm.begin_tool(remote, "transform")
cur_origin = mm.get_toolparam(remote, "origin")
dy = -((cur_origin[1] - min[1]) + move_dy * 2 / size_x)
rotation = mm.make_matrix_from_axes(selFrame.x, mm.negv3(selFrame.z),
selFrame.y)
mm.set_toolparam(remote, "rotation", rotation)
translate = mm.subv3(selFrame.origin, cur_origin)
translate = mm.addv3(translate, mm.mulv3s(selFrame.z, dy))
mm.set_toolparam(remote, "translation", translate)
mm.accept_tool(remote)
mm.select_objects(remote, [tar_object, new_objs[0]])
result = TestIntersection(tar_object, new_objs[0])
mm.select_objects(remote, [new_objs[0]])
delete_select_objects()
mm.select_objects(remote, [tar_object])
return not result
def import_connector(do_accept,connectorName):
# initialize connection
remote = mmRemote();
remote.connect();
setConnectorPath(connectorName)
# find center of current selection, and then shoot ray from below this point, straight upwards, and
# hope that it hits outer shell
centroid = mm.get_face_selection_centroid(remote)
sel_ctr = centroid
(bFound, selFrame) = mm.find_ray_hit(remote, mm.addv3(sel_ctr, (0,-10,0)), (0,1,0) )
# exit out of selection tool
mm.clear_face_selection(remote)
# import part we want to position at selection
cwd = os.getcwd()
socketPath = os.path.join(cwd,'socket',connectorName)
new_objs = mm.append_objects_from_file(remote, socketPath);
# rename part
mm.set_object_name(remote, new_objs[0], ConnectorName() )
# select new part
mm.select_objects(remote, new_objs)
# get bbox of part, so that we can put origin at bottom of cylinder if desired (assume file authored that way)
(min,max) = mm.get_selected_bounding_box(remote)
partTop = ( (min[0]+max[0])/2, max[1], (min[2]+max[2])/2 )
partCenter = ( (min[0]+max[0])/2, (min[1]+max[1])/2, (min[2]+max[2])/2 )
partH = max[1]-min[1]
# RMS HACK BECAUSE OF UNITS STUPID
plane_cut_setback = partH * 0.5
# start transform tool
mm.begin_tool(remote, "transform")
cur_origin = mm.get_toolparam(remote, "origin")
dy = 0.5*partH
# [RMS] currently assuming that leg is oriented wrt axis, so we keep connector vertical
# compute and apply rotation
#rotation = mm.make_matrix_from_axes(selFrame.x, mm.negv3(selFrame.z), selFrame.y )
#mm.set_toolparam(remote, "rotation", rotation )
# translate origin of part to frame origin
translate = mm.subv3( selFrame.origin, cur_origin )
# shift along frame Z to place bottom of part on surface (ie at frame origin)
translate = mm.addv3( translate, mm.mulv3s( selFrame.z, dy ) )
mm.set_toolparam(remote, "translation", translate )
# accept xform
if do_accept:
mm.accept_tool(remote)
remote.shutdown()
def import_connector(do_accept):
# initialize connection
remote = mmRemote();
remote.connect();
# find center of current selection, and then shoot ray from below this point, straight upwards, and
# hope that it hits outer shell
centroid = mm.get_face_selection_centroid(remote)
sel_ctr = centroid
(bFound, selFrame) = mm.find_ray_hit(remote, mm.addv3(sel_ctr, (0,-10,0)), (0,1,0) )
# exit out of selection tool
mm.clear_face_selection(remote)
# import part we want to position at selection
cwd = os.getcwd()
socketPath = os.path.join(cwd,'socket','socket.obj')
new_objs = mm.append_objects_from_file(remote, socketPath);
# rename part
mm.set_object_name(remote, new_objs[0], ConnectorName() )
# select new part
mm.select_objects(remote, new_objs)
# get bbox of part, so that we can put origin at bottom of cylinder if desired (assume file authored that way)
(min,max) = mm.get_selected_bounding_box(remote)
partTop = ( (min[0]+max[0])/2, max[1], (min[2]+max[2])/2 )
partCenter = ( (min[0]+max[0])/2, (min[1]+max[1])/2, (min[2]+max[2])/2 )
partH = max[1]-min[1]
# RMS HACK BECAUSE OF UNITS STUPID
plane_cut_setback = partH * 0.5
# start transform tool
mm.begin_tool(remote, "transform")
cur_origin = mm.get_toolparam(remote, "origin")
dy = 0.5*partH
# [RMS] currently assuming that leg is oriented wrt axis, so we keep connector vertical
# compute and apply rotation
#rotation = mm.make_matrix_from_axes(selFrame.x, mm.negv3(selFrame.z), selFrame.y )
#mm.set_toolparam(remote, "rotation", rotation )
# translate origin of part to frame origin
translate = mm.subv3( selFrame.origin, cur_origin )
# shift along frame Z to place bottom of part on surface (ie at frame origin)
translate = mm.addv3( translate, mm.mulv3s( selFrame.z, dy ) )
mm.set_toolparam(remote, "translation", translate )
# accept xform
if do_accept:
mm.accept_tool(remote)
remote.shutdown()
# select imported part
mm.select_objects(remote, new_objs)
mm.begin_tool(remote, "transform")
mm.set_toolparam(remote, "scale", [1, size, 1])
#mm.set_toolparam(remote, "translation", [0,0,0])
mm.accept_tool(remote)
# get bbox of part, so that we can put origin at bottom of object if desired
# (we are assuming that in its file, the part is positioned at the origin, on the ground plane)
(min, max) = mm.get_selected_bounding_box(remote)
# start transform tool
mm.begin_tool(remote, "transform")
cur_origin = mm.get_toolparam(remote, "origin")
print(cur_origin)
print(min)
dy = -(cur_origin[1] - min[1])
# compute and apply rotation
rotation = mm.make_matrix_from_axes(selFrame.x, mm.negv3(selFrame.z),
selFrame.y)
mm.set_toolparam(remote, "rotation", rotation)
# translate origin of part to frame origin
translate = mm.subv3(selFrame.origin, cur_origin)
# uncomment this line to shift along frame Z, this will place bottom of part on surface (ie at frame origin)
#translate = mm.addv3( translate, mm.mulv3s( selFrame.z, dy ) )
mm.set_toolparam(remote, "translation", translate)
# accept xform
# exit out of selection tool mm.clear_face_selection(remote) # import part we want to position at selection new_objs = mm.append_objects_from_file(remote, part_filename); # select imported part mm.select_objects(remote, new_objs) # get bbox of part, so that we can put origin at bottom of object if desired # (we are assuming that in its file, the part is positioned at the origin, on the ground plane) (min,max) = mm.get_selected_bounding_box(remote) # start transform tool mm.begin_tool(remote, "transform") cur_origin = mm.get_toolparam(remote, "origin") dy = cur_origin[1] - min[1] # compute and apply rotation rotation = mm.make_matrix_from_axes(selFrame.x, mm.negv3(selFrame.z), selFrame.y ) mm.set_toolparam(remote, "rotation", rotation ) # translate origin of part to frame origin translate = mm.subv3( selFrame.origin, cur_origin ) # uncomment this line to shift along frame Z, this will place bottom of part on surface (ie at frame origin) #translate = mm.addv3( translate, mm.mulv3s( selFrame.z, dy ) ) mm.set_toolparam(remote, "translation", translate ) # accept xform mm.accept_tool(remote)