def do_3(self, arg):
'''
Bulk to change meter's credit balance relative to their current credit.
Example: set the `amount target` to 20000 for all meter if the current credit is under 1000 (`current maximum amount`).
important action:
1 validate your setting by showing it
s switch to other file setting
'''
tamount = input('%-45s: ' % "Input amount target")
tmaxmount = input('%-45s: ' % "Input current maximum amount")
if not tamount.isdigit() or not tmaxmount.isdigit():
print("Input is invalid number")
return
for data in self.settingJson:
#0 skip disabled config
if data.get('disabled', False):
continue
#1 flag for current base url from setting
print('\n' + data['baseurl'] + '\t:')
#2 get meter info
loginSession = sparkWebsite(data['baseurl'], data['username'],
data['password'])
loginSession.METER.getAllMeterInfo().changeAllMeterCredit(
float(tamount), float(tmaxmount))
def do_findingProtectedMeterAndReset(profile):
#1 flag for current base url from setting
print('\n' + profile['baseurl']+'\t:')
files = os.listdir()
for fl in files:
if fl.endswith(".csv"):
os.remove(fl)
#2 get meter status, failure retry count
retriesCount = s().Data['retry_count_strategy']
while retriesCount > 0:
try:
#3 loging in
currentWebsiteSession = sparkWebsite(profile['baseurl'], profile['username'], profile['password'])
meterStates = currentWebsiteSession.METER.getReadLatestState()['readings']
state = 'state'
sn = 'serial'
addr = 'address'
iii = 0
telegramMessage = []
# finding meter
for meterstate in meterStates:
#filter by protect and totalizer SN
if str(meterstate[state]).lower() == "protect" and str(meterstate['serial']).find('SM100E')<0:
iii += 1
gb = meterstate['ground_name']
print('%s Reset for SN: %-25s ADDR: %-50s on GB: %-50s ' %
(iii, meterstate[sn], meterstate[addr], gb))
# do reset
if do_resetprotect(meterstate[sn]):
currentLog = log(meterstate)
fn = currentLog.saveLogToCSV(gb, datetime.datetime.utcnow())
telegramMessage.append('\n%s\t %s\t %s\t %s' % (meterstate[sn], meterstate['ground_name'], meterstate[addr], meterstate['heartbeat_end'] ))
currentLog.saveCSVtoSQLDB(gb)
currentLog.saveCsvLogToBlob(fn)
if len(telegramMessage) > 0:
messg = '%s (%s meter/s)\n %s' % ( profile['baseurl'], len(telegramMessage), str('\n').join(telegramMessage) )
tb().sendMessageToAllRegisteredChannel(messg)
telegramMessage.clear()
retriesCount = 0
except Exception as e :
print(e)
retriesCount -= 1
def do_2(self, arg):
'''
Bulk Zeroing credit balance, this program just zeroing credit if current credit value is under zero (0).
this method is use `current setting to iterate all credentials` availabe on it to access all meters on it.
important action:
1 validate your setting by showing it, `s` command
s switch to other file setting, `s some_relatif_file_path.json`
'''
for data in self.settingJson:
#0 skip disabled config
if data.get('disabled', False):
continue
#1 flag for current base url from setting
print('\n' + data['baseurl'] + '\t:')
#2 get meter
loginSession = sparkWebsite(data['baseurl'], data['username'],
data['password'])
loginSession.METER.getAllMeterInfo().changeAllMeterCredit(0, 0)
from model.website import sparkWebsite
from utils.log import log
from utils.setting import setting as s
from utils.telegram_bot import telegram_bot as tb
import datetime, time, os
currentWebsiteSession = sparkWebsite()
def do_resetprotect(arg):
'''
non verbose to reset protect of single meter serial on current login session,
'''
retries = True
while retries:
try:
br = currentWebsiteSession.METER.resetMeter(arg)
retries = False
return br._states != -1
except Exception as e:
print(e)
return False
def do_findingProtectedMeterAndReset(profile):
#1 flag for current base url from setting
print('\n' + profile['baseurl']+'\t:')
def do_resetprotectall(self, arg):
'''
reset all protected meter (meter is in protect state)
'''
settings = []
retries = True
print('Site selection. Type `x` to excluding site.')
while retries:
settings = []
for data in self.settingJson:
#0 skip disabled config
if data.get('disabled', False):
continue
if str(self.myInput('%-50s: ' %
(data['baseurl']), '')).lower() != 'x':
settings.append(data)
retries = str(input('Type `r` to Retry: ')).lower() == 'r'
if len(settings) == 0:
print('No more action needed.')
return
infinite_mode = self.myInput(
'Type `i` to runs in infinite mode for every 30 minutes [or] else to run just once: ',
'').lower() == 'i'
admin_name = self.myInput(
'Kindly you must type your long name for your work log? ', '')
runs = True
delayed_second = 1800 # int( self.myInput('Type how countdown delay in seconds for infinite mode, default=900 : ', 900))
import datetime, time
start_time = datetime.datetime.now()
while runs:
try:
if infinite_mode:
while datetime.datetime.now() < start_time:
time.sleep(60)
for data in settings:
#1 flag for current base url from setting
print('\n%-50s -----> ' % (data['baseurl']))
#2 get meter status
retriesCount = 3
while retriesCount > 0:
try:
self.currentWebsiteSession = sparkWebsite(
data['baseurl'], data['username'],
data['password'])
meterStates = self.currentWebsiteSession.METER.getReadLatestState(
)['readings']
retriesCount = 0
except Exception as e:
print(e)
retriesCount -= 1
ground_nm = 'ground_name'
state = 'state'
sn = 'serial'
addr = 'address'
iii = 0
for meterstate in meterStates:
if str(meterstate[state]).lower() == "protect":
iii += 1
meterstate['access_user'] = admin_name
meterstate[
'reset_datetime'] = datetime.datetime.utcnow()
gb = meterstate[ground_nm]
print(
'%s Reset for SN: %-25s ADDR: %-50s on GB: %-50s '
% (iii, meterstate[sn], meterstate[addr], gb))
self.do_resetprotect(meterstate[sn])
header = []
for key in meterstate.keys():
header.append(key)
p = '%s_reset_log.csv' % (gb)
mode = 'a' if Path(p).exists() else 'w'
with open(p, mode, newline='') as mFile:
out = csv.DictWriter(mFile,
dialect='excel',
fieldnames=header,
delimiter=';',
quoting=csv.QUOTE_MINIMAL)
if mode == 'w':
out.writeheader()
out.writerow(meterstate)
print('Finish check at %s' % (datetime.datetime.now()))
start_time = datetime.datetime.now() + datetime.timedelta(
seconds=delayed_second)
runs = infinite_mode
except Exception as e:
print(e)
if self.myInput('Type (Y/N) to terminate current circle? ',
'N').lower() == 'y':
runs = False
class main(console):
intro = """
Welcome to 'SparkBulk' for set sparkmeter credit or else
type 'Help <topic>' for more help
1 Show setting (sparkmeter credentials)
2 Bulk Zeroing credit balance !!!for all meter on current setting!!!
3 Bulk Set custom credit balance !!!for all meter on current setting!!!
4 Change meter state
5 Change meter tariff
6 Create payment to change meter credit
7 Bulk edit meter by file of `c` (new temp meter info)
8 Bulk menu
==========================================================================
l Login
f Set custom filter
g Get meter based on custom filter (f) for current login session (l)
c Compare current taken meters by (g) with csv (semicolon delimiters) file
s Setting
x Exit
"""
prompt = '(SparkBulk): '
settingJson = ''
meterJsonArray = []
__myLogin = menu_login()
currentWebsiteSession = sparkWebsite()
__myCustomFilter = menu_customFilter()
currentFilter = ''
def do_1(self, arg):
'''
Show current setting file where will be use for bulk operation, default is what inside `settings.json`.
'''
print(json.dumps(self.settingJson, indent=4))
def do_2(self, arg):
'''
Bulk Zeroing credit balance, this program just zeroing credit if current credit value is under zero (0).
this method is use `current setting to iterate all credentials` availabe on it to access all meters on it.
important action:
1 validate your setting by showing it, `s` command
s switch to other file setting, `s some_relatif_file_path.json`
'''
for data in self.settingJson:
#0 skip disabled config
if data.get('disabled', False):
continue
#1 flag for current base url from setting
print('\n' + data['baseurl'] + '\t:')
#2 get meter
loginSession = sparkWebsite(data['baseurl'], data['username'],
data['password'])
loginSession.METER.getAllMeterInfo().changeAllMeterCredit(0, 0)
def do_3(self, arg):
'''
Bulk to change meter's credit balance relative to their current credit.
Example: set the `amount target` to 20000 for all meter if the current credit is under 1000 (`current maximum amount`).
important action:
1 validate your setting by showing it
s switch to other file setting
'''
tamount = input('%-45s: ' % "Input amount target")
tmaxmount = input('%-45s: ' % "Input current maximum amount")
if not tamount.isdigit() or not tmaxmount.isdigit():
print("Input is invalid number")
return
for data in self.settingJson:
#0 skip disabled config
if data.get('disabled', False):
continue
#1 flag for current base url from setting
print('\n' + data['baseurl'] + '\t:')
#2 get meter info
loginSession = sparkWebsite(data['baseurl'], data['username'],
data['password'])
loginSession.METER.getAllMeterInfo().changeAllMeterCredit(
float(tamount), float(tmaxmount))
def do_4(self, arg):
'''
Change meter state to `off`/`on`/`auto` for all meter in current filtered meters
related command: `f`, `g`
'''
if arg == '':
state = self.myInput(
'Input new meter state with `off`/`on`/`auto` or key else to abort: ',
'auto')
if state in ['off', 'on', 'auto']:
self.currentWebsiteSession.METER.changeAllMeterState(state)
else:
metersLocal = rJ(arg).read()
a = 1
z = len(metersLocal)
for m in metersLocal:
print('\n\nMeter no %s from %s ; SN = %s ; url = %s' %
(a, z, m['meter_serial'],
self.currentWebsiteSession.LOGIN_iNFO.URL))
a += 1
intState = m['meter_state']
state = 'off' if intState == 0 else 'on' if intState == 1 else 'auto'
self.currentWebsiteSession.METER.changeAllMeterState(
m['meter_serial'], state)
def do_m(self, arg):
self.currentWebsiteSession.METER.changeMeterState(arg, 'off')
def do_5(self, arg):
'''
Change meter tarif to other tariff profile,
related command: `f`, `g`
Note : you need valid `tariff profile id` to use this method
e.g : https://web.com/tariff/48b0ee32-cf87-4df4-8ea4-757233a14825/
tarif id : 48b0ee32-cf87-4df4-8ea4-757233a14825
'''
self.do_help('5')
if arg == '':
url = self.currentWebsiteSession.LOGIN_iNFO.URL
if len(url) > 0:
url += '/tariff'
import webbrowser
webbrowser.open(url, new=2)
tarifId = self.myInput(
'input valid tarif id and recheck, `enter` or `x` to abort: ',
'x')
if tarifId != 'x':
self.currentWebsiteSession.METER.changeAllMeterTariff(tarifId)
def do_6(self, arg):
'''
Change meter credit for all meter in current filtered meters
related command: `f`, `g`
'''
tamount = input('%-45s: ' % "Input amount target")
tmaxmount = input('%-45s: ' % "Input current maximum amount")
if not tamount.isdigit() or not tmaxmount.isdigit():
print("Input is invalid number")
return
self.currentWebsiteSession.METER.changeAllMeterCredit(
float(tamount), float(tmaxmount))
def do_7(self, arg):
'''
Push new meter information on temporary file (end result/output) of `c` command,
e.g: c "d:/myDir/temp_new_meter_info-sparkcloud.json"
'''
self.currentWebsiteSession.METER.getMeterInfo(
filterJson=self.currentFilter, useFilter=True)
metersLocal = rJ(arg).read()
a = 1
z = len(metersLocal)
for m in metersLocal:
print('\n\nMeter no %s from %s ; SN = %s ; url = %s' %
(a, z, m['meter_serial'],
self.currentWebsiteSession.LOGIN_iNFO.URL))
a += 1
self.editMeter(m, False)
def do_reverse(self, arg):
rr = [
'19227266-b852-4213-b7df-76caf7d0c410',
'e1f31013-b9e0-486a-8f5c-5fcb6f75bd58',
'573801e3-8978-49f9-ba6f-3f5b333c2958',
'eea98cfa-dab1-4711-9de2-f9a776e2f88b',
'ec0f7408-ba89-43cc-9a00-0694371ed6cc',
'c7e21141-3799-4fc8-bba7-6c7d6a415edf',
'6022cb6b-da51-44c3-aa87-a1912c5d1d12',
'aed43da1-f6bb-4c01-8778-dd3a3c496622',
'497ebe81-040f-43c2-bef2-9b9283b358f4',
'95feb6aa-879c-42eb-be23-5240acd24e45',
'9ae5ec1c-14b2-4190-99a9-57f4fb5d13bc',
'f5bbf7e5-6b27-44de-80b0-0a302faf9c31',
'233c8e29-ae46-4f1a-a730-2ea41d1e886d',
'c765c952-a583-48af-8c3f-7664dfc2db16',
'7d78cdcf-9966-463c-a383-afe1035a7b46',
'269ef483-6efa-44c8-aa4a-c5c389200140',
'faa34070-860c-4d00-ae74-7b61121e285f',
'4a3e7e59-044d-4a9b-8672-332a28b355d3',
'ec48df12-b2ed-4463-b59b-b46dcde07995',
'10d50f05-a968-46cb-8add-6f2660601407',
'3b65ae02-0cc6-4951-9c3f-cb24f13985be',
'911edde5-b64b-430f-b71c-2fe891a620ef',
'00629c25-a910-4c11-aea3-e0c208759474',
'494071e0-3905-40cf-8066-4a6622b8438f',
'b0fe92da-a48b-40ec-8716-95ec81812adc',
'b41c6211-6df1-4089-877d-bda9ba6a00bc',
'0cc9ac86-8874-4f54-a66d-90396d9bfa51'
]
for s in rr:
self.currentWebsiteSession.METER.reverse(s)
def do_8(self, arg):
'''
Bulk menu to access bulk script
hard typed available argument: `reset-protect`, `zero-credit`, `set-credit`
related command: `1`, `2`, `3`
'''
if arg == '':
print(self.do_help('8'))
if str(arg) == 'reset-protect':
self.do_resetprotectall('')
if str(arg) == 'zero-credit':
self.do_2('')
if str(arg) == 'set-credit':
self.do_3('')
def do_resetprotectall(self, arg):
'''
reset all protected meter (meter is in protect state)
'''
settings = []
retries = True
print('Site selection. Type `x` to excluding site.')
while retries:
settings = []
for data in self.settingJson:
#0 skip disabled config
if data.get('disabled', False):
continue
if str(self.myInput('%-50s: ' %
(data['baseurl']), '')).lower() != 'x':
settings.append(data)
retries = str(input('Type `r` to Retry: ')).lower() == 'r'
if len(settings) == 0:
print('No more action needed.')
return
infinite_mode = self.myInput(
'Type `i` to runs in infinite mode for every 30 minutes [or] else to run just once: ',
'').lower() == 'i'
admin_name = self.myInput(
'Kindly you must type your long name for your work log? ', '')
runs = True
delayed_second = 1800 # int( self.myInput('Type how countdown delay in seconds for infinite mode, default=900 : ', 900))
import datetime, time
start_time = datetime.datetime.now()
while runs:
try:
if infinite_mode:
while datetime.datetime.now() < start_time:
time.sleep(60)
for data in settings:
#1 flag for current base url from setting
print('\n%-50s -----> ' % (data['baseurl']))
#2 get meter status
retriesCount = 3
while retriesCount > 0:
try:
self.currentWebsiteSession = sparkWebsite(
data['baseurl'], data['username'],
data['password'])
meterStates = self.currentWebsiteSession.METER.getReadLatestState(
)['readings']
retriesCount = 0
except Exception as e:
print(e)
retriesCount -= 1
ground_nm = 'ground_name'
state = 'state'
sn = 'serial'
addr = 'address'
iii = 0
for meterstate in meterStates:
if str(meterstate[state]).lower() == "protect":
iii += 1
meterstate['access_user'] = admin_name
meterstate[
'reset_datetime'] = datetime.datetime.utcnow()
gb = meterstate[ground_nm]
print(
'%s Reset for SN: %-25s ADDR: %-50s on GB: %-50s '
% (iii, meterstate[sn], meterstate[addr], gb))
self.do_resetprotect(meterstate[sn])
header = []
for key in meterstate.keys():
header.append(key)
p = '%s_reset_log.csv' % (gb)
mode = 'a' if Path(p).exists() else 'w'
with open(p, mode, newline='') as mFile:
out = csv.DictWriter(mFile,
dialect='excel',
fieldnames=header,
delimiter=';',
quoting=csv.QUOTE_MINIMAL)
if mode == 'w':
out.writeheader()
out.writerow(meterstate)
print('Finish check at %s' % (datetime.datetime.now()))
start_time = datetime.datetime.now() + datetime.timedelta(
seconds=delayed_second)
runs = infinite_mode
except Exception as e:
print(e)
if self.myInput('Type (Y/N) to terminate current circle? ',
'N').lower() == 'y':
runs = False
def do_resetprotect(self, arg):
'''
non verbose to reset protect of single meter serial on current login session,
note: to use this single command, current `login session` must be defined first by `l` command
and set meter_serial as argumen.
ex. l login ------> resetprotect SM5R-002-0000000
'''
retries = True
while retries:
try:
self.currentWebsiteSession.METER.resetMeter(arg)
retries = False
except Exception as e:
print(e)
def do_d(self, arg):
'''
only check customer_code duplication on current meter-list,
related command: `g`
'''
meters = self.meterJsonArray
duplicate = []
skipCustName = []
field = 'customer_code'
savedField = 'meter_serial'
for m in meters:
selfCustName = m[field]
if selfCustName not in skipCustName:
newDup = []
skipCustName.append(selfCustName)
for n in meters:
if n[field] not in skipCustName:
if n[field] == selfCustName:
newDup.append(n[savedField])
if len(newDup) > 0:
newDuplicateInfo = {}
newDuplicateInfo[field] = selfCustName
newDuplicateInfo[savedField] = newDup
duplicate.append(newDuplicateInfo)
Path('duplicated_meter_info-' +
self.currentWebsiteSession.LOGIN_iNFO.URL.split('/')[2] +
'.json').write_text(str(json.dumps(duplicate, indent=4)))
def do_f(self, arg):
'''
Manage meter filter. Type `f help` for more help.
'''
if type(self.__myCustomFilter) != type(menu_customFilter()):
self.__myCustomFilter = menu_customFilter()
self.__myCustomFilter = self.openChild(self.__myCustomFilter, arg)
if self.__myCustomFilter is not None:
self.currentFilter = self.__myCustomFilter.FILTER
def do_g(self, arg):
'''
Get filtered meters, this method will get all
filtered meters from current login session
show Showing current filtered meters
-d Get MeterInfo including customer code, meter coordinate
-s Save to Json and CSV
related command: `l`
'''
if arg == 'show':
print(json.dumps(self.meterJsonArray, indent=4))
print('Total : %i' % (len(self.meterJsonArray)))
elif arg == '-s':
self.saveJson(self.currentWebsiteSession.LOGIN_iNFO.URL)
else:
pFilt = self.currentFilter
try:
if arg == "-d":
meters = self.currentWebsiteSession.METER.getMeterInfo(
pFilt, True).getDetailOfAllMeterlInfo()
else:
meters = self.currentWebsiteSession.METER.getMeterInfo(
filterJson=pFilt, useFilter=True)
except Exception as e:
print(e)
self.meterJsonArray = meters.METER_JSONCOLLECTION['meters']
if input('type `yes` to show ') == 'yes':
self.do_g('show')
self.do_g('-s')
def do_c(self, arg):
'''
!!!!!!!!!!!!!!!!!!!!!! CASE SENSITIVE MODE REQUIRED !!!!!!!!!!!!!!!!!!!!!!!!!
Compare meter info on current grabbed meter to specific csv (semicolon delimiter)
required column name: `site_url`, `add?` see comprarison.csv for example
ex: l login
g
c mycomparisondata.csv
related command: `g`
'''
if not Path(arg.replace('"', '')).exists() or arg == '':
return
with open(arg.replace('"', '')) as csvFile:
csvReader = csv.DictReader(csvFile, dialect='excel', delimiter=';')
newMeterInfos = []
dik = []
for b in csvReader:
d = {}
for key, value in b.items():
d[key] = value
dik.append(d)
##### iterate all grabbed meters
a = 1
z = len(self.meterJsonArray)
for m in self.meterJsonArray:
##### print meter index
print('\n\nMeter no %s from %s ; SN = %s ; url = %s' %
(a, z, m['meter_serial'],
self.currentWebsiteSession.LOGIN_iNFO.URL))
a += 1
##### print header
print(
'%-134s???????????? Type `a new value`/ c / l / ~:null / ENTER:skip ??????????????'
% '')
print('%-32s %-50s %s' %
('', '(c) Cloud Version', '(l) Local version'))
##### finding matches meter serial on csv
newMeterInfo = {}
for cm in dik:
##### compare if found
if cm.get('meter_serial') == m.get(
'meter_serial') and cm.get('site_url') in (
self.currentWebsiteSession.LOGIN_iNFO.URL
) and cm.get('add?', '') == '':
tempNewMetetInfo = {}
for key in m:
value = m.get(key, '')
cmvalue = cm.get(key, value)
if key == 'meter_state':
try:
cmvalue = int(cmvalue)
except:
pass
if cmvalue != value:
inp = input('%-30s : %-50s %-50s <<<<<<<<< ' %
(key, value, cmvalue))
if inp == 'c' or inp == '':
tempNewMetetInfo[key] = value
elif inp == 'l':
tempNewMetetInfo[key] = cmvalue
else:
tempNewMetetInfo[key] = inp
newMeterInfo = tempNewMetetInfo
print(
'\n↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓\n'
)
newMeterInfo = {**m, **newMeterInfo}
for key in m:
print('%-30s : %-50s %s' %
(key, m[key], newMeterInfo.get(key, '')))
if m != newMeterInfo:
newMeterInfos.append(newMeterInfo)
if input('Type `s` to send or else to skip anymore : '
).lower() == 's':
self.editMeter(newMeterInfo)
if len(newMeterInfos) > 0:
Path('temp_new_meter_info-' +
self.currentWebsiteSession.LOGIN_iNFO.URL.split('/')[2] +
'.json').write_text(
str(json.dumps(newMeterInfos, indent=4)))
def editMeter(self,
meterInfo,
verboseMode: bool = True,
maxRetry: int = -1):
retries = True
retriesElapsed = 0
while retries:
if retriesElapsed == maxRetry:
retries = False
try:
self.currentWebsiteSession.METER.editMeterInfo(
meterInfo['meter_serial'], **meterInfo)
retries = False
except Exception as e:
print(e)
if verboseMode:
if self.myInput("\nType `s` to Skip or else to Retry : ",
"").lower() == "s":
retries = False
finally:
if maxRetry > -1:
retriesElapsed += 1
def saveJson(self, url):
url = str(url)
if url == '' or len(url.split('/')) <= 2 or self.meterJsonArray == '':
return
outputFileName = url.split('/')[2]
inp = input("type `sv` to save to %s -- json and csv file: " %
(outputFileName))
if inp == 'sv':
header = []
for key in self.meterJsonArray[0]:
header.append(key)
with open(outputFileName + '.csv', 'w', newline='') as mFile:
out = csv.DictWriter(mFile,
dialect='excel',
fieldnames=header,
delimiter=';',
quoting=csv.QUOTE_MINIMAL)
out.writeheader()
out.writerows(self.meterJsonArray)
rJ(outputFileName + '.json').createFromObject(
self.meterJsonArray).save()
def do_l(self, arg):
'''
Login to sparkmeter website, use current settings or enter new characters
'''
if type(self.__myLogin) != type(menu_login()):
self.__myLogin = menu_login()
args = '%s %s' % (arg, str(self.settingJson).replace("'", '"').replace(
'True', 'true').replace('False', 'false'))
#TODO support select login from current settings
self.__myLogin = self.openChild(self.__myLogin, args)
if self.__myLogin is not None:
self.currentWebsiteSession = self.__myLogin.BROWSER_SESSION
def do_s(self, name=''):
'''
change current setting file to other exist file,
e.g. s settings.json
'''
defName = 'settings.json'
name = defName if name == '' or name is None else name
if not Path(name).exists():
name = defName
a = rJ(name).read()
self.settingJson = a['credentials']
def precmd(self, line):
self.do_s()
return line
class menu_login(console):
'''
Login function
'''
__URL = ''
__USERNAME = ''
__PASSWORD = ''
BROWSER_SESSION = sparkWebsite()
def do_show(self, arg):
'''
Show current login info
'''
try:
print(self.BROWSER_SESSION.LOGIN_iNFO.BROWSER.url)
except Exception as a:
print(a.args)
return self
def do_login(self, arg):
'''
Login to sparkmeter website with username and password
'''
temp = {}
selection = {}
num = 1
if str(arg).startswith("[{") and str(arg).endswith("}]"):
import json
p = json.loads(arg)
for a in p:
temp[a['baseurl']] = {
'email': a['username'],
'pwd': a['password']
}
selection[num] = a['baseurl']
print(str(num) + "\t: " + selection[num])
num += 1
while True:
inp = input('Type your targeted site number : ')
i = 0
try:
i = int(inp)
except:
pass
if i >= 1 and i <= num:
url = selection[i]
em = temp[url]['email']
pwd = temp[url]['pwd']
else:
print('\nOverload !!!\n')
url = self.myInput('Url : ', self.__URL)
em = self.myInput('Username : '******'Password : '******'\nLogin success as %s at \n%s' %
(em, br.LOGIN_iNFO.BROWSER.url))
keyPress = input(
'Type `yes` or `ENTER` to set as current session or any key to skip: '
)
if keyPress == 'yes' or keyPress == '':
self.BROWSER_SESSION = br
else:
print('\nLogin fail')
print('''
* relogin
x exit
''')
if input(self.chooselabel) == 'x':
break
return self
def do_save(self, arg):
'''
Store current login credential into file setting,
e.g. save settings.json
'''
url = self.BROWSER_SESSION.LOGIN_iNFO.URL
em = self.BROWSER_SESSION.LOGIN_iNFO.USERNAME
pwd = self.BROWSER_SESSION.LOGIN_iNFO.PASSWORD
if url == '' or em == '' or em == '':
print(
'\nCannot read your valid credential, No login session in current state.\nThis action is not available.'
)
return self
rootElement = 'credentials'
b = []
a = rJ(arg).read()
tempCredential = {'username': em, 'password': pwd, 'baseurl': url}
print(a)
if hasattr(a, "__getitem__"):
a = a[rootElement]
a.append(tempCredential)
b = a
else:
b.append(tempCredential)
b = {rootElement: b}
rJ(arg).createFromObject(b).save()
return self
def do_login(self, arg):
'''
Login to sparkmeter website with username and password
'''
temp = {}
selection = {}
num = 1
if str(arg).startswith("[{") and str(arg).endswith("}]"):
import json
p = json.loads(arg)
for a in p:
temp[a['baseurl']] = {
'email': a['username'],
'pwd': a['password']
}
selection[num] = a['baseurl']
print(str(num) + "\t: " + selection[num])
num += 1
while True:
inp = input('Type your targeted site number : ')
i = 0
try:
i = int(inp)
except:
pass
if i >= 1 and i <= num:
url = selection[i]
em = temp[url]['email']
pwd = temp[url]['pwd']
else:
print('\nOverload !!!\n')
url = self.myInput('Url : ', self.__URL)
em = self.myInput('Username : '******'Password : '******'\nLogin success as %s at \n%s' %
(em, br.LOGIN_iNFO.BROWSER.url))
keyPress = input(
'Type `yes` or `ENTER` to set as current session or any key to skip: '
)
if keyPress == 'yes' or keyPress == '':
self.BROWSER_SESSION = br
else:
print('\nLogin fail')
print('''
* relogin
x exit
''')
if input(self.chooselabel) == 'x':
break
return self
