def testSinceAlarmProcessing(self):
self.process = ProcessTask.Create(self.e)
self.process.Update(rule_ids=[self.ign_on_alarm.key().id(), self.ign_off_alarm.key().id()])
self.process.put()
# Apply our process to our sensor
self.sp = SensorProcessTask.Create(self.e, self.process, self.vehicle_1)
self.sp.put()
BATCH_1 = {
'speed': [0, 5, 15, 35, 60, 80, 83, 88, 85, 20, 0, 0, 0, 0, 15, 92, 90, 0, 0],
'ign_on': [0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0], # Ignition on twice
'ign_off': [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0] # Ignition off twice
}
# In total, on for 12 data points
self.__createNewRecords(BATCH_1, first_dt=datetime.now() - timedelta(minutes=5), interval_secs=INTERVAL_SECS)
self.__runProcessing()
# Confirm analyzed total on seconds
a = Analysis.GetOrCreate(self.vehicle_1, ANALYSIS_KEY_PATTERN)
self.assertIsNotNone(a)
self.assertEqual(a.columnValue('on_secs'), 12 * INTERVAL_SECS)
self.sp = SensorProcessTask.Get(self.process, self.vehicle_1)
self.assertEqual(self.sp.status_last_run, PROCESS.OK)
def testParsingIssues(self):
# Try to run calculation against nonexistant column
self.process = ProcessTask.Create(self.e)
spec = json.dumps({
'processers': [{
'calculation': 'MAX({missing_column})',
'column': 'output',
'analysis_key_pattern': ANALYSIS_KEY_PATTERN
}]
})
self.process.Update(spec=spec,
rule_ids=[self.speeding_alarm.key().id()])
self.process.put()
# Apply our process to our sensor
self.sp = SensorProcessTask.Create(self.e, self.process,
self.vehicle_1)
self.sp.put()
BATCH_1 = {
'speed': [0 for x in range(10)],
}
self.__createNewRecords(BATCH_1, first_dt=datetime.now())
self.__runProcessing()
self.sp = SensorProcessTask.Get(self.process, self.vehicle_1)
self.assertEqual(self.sp.status_last_run, PROCESS.OK)
def testNoDataAlarm(self):
self.mia_alarm = Rule.Create(self.e)
self.mia_alarm.Update(name="No Data",
sensortype_id=self.spedometer.key().id(),
column="speed",
trigger=RULE.NO_DATA,
duration=5000) # No data for > 5s
self.mia_alarm.put()
self.process = ProcessTask.Create(self.e)
self.process.Update(spec=None, rule_ids=[self.mia_alarm.key().id()])
self.process.put()
# Apply our process to our sensor
self.sp = SensorProcessTask.Create(self.e, self.process,
self.vehicle_1)
self.sp.dt_last_run = datetime.now() - timedelta(minutes=2)
self.sp.put()
self.__runProcessing()
# Process last 2 minutes, with no new data, fires alarm
alarms = Alarm.Fetch(self.vehicle_1, self.mia_alarm)
# self.assertEqual(len(alarms), 1)
batch_1 = {'speed': [1, 1, 1, 1, 1]}
self.__createNewRecords(batch_1, interval_secs=3)
self.__runProcessing()
# We get data every 3 seconds, so 5-second no-data alarm doesn't fire
alarms = Alarm.Fetch(self.vehicle_1, self.mia_alarm)
self.assertEqual(len(alarms), 0)
def testAlarmWithPayment(self):
# Create smartphone report sensor
self.smartphone_sensor_type = SensorType.Create(self.e)
schema = {'agreement': {'unit': '1-5 scale'}}
self.smartphone_sensor_type.Update(name="Report Sensor",
schema=json.dumps(schema))
self.smartphone_sensor_type.put()
self.smartphone_sensor = Sensor.Create(
self.e, "1000",
self.smartphone_sensor_type.key().id())
self.smartphone_sensor.Update(
sensortype_id=self.smartphone_sensor_type.key().id(),
name="Smartphone Reports 1",
contacts={"user": self.owner.key().id()})
self.smartphone_sensor.put()
# Create smartphone report rule with payment on any report
PMNT_AMOUNT = 10.0
self.any_report_rule = Rule.Create(self.e)
self.any_report_rule.Update(
name="Any Report",
sensortype_id=self.smartphone_sensor_type.key().id(),
column="agreement",
trigger=RULE.ANY_DATA,
payment_contacts=["user"],
payment_amount=PMNT_AMOUNT,
consecutive_limit=RULE.
ANY, # Deactivate immediately (should be == 1)
duration=0)
self.any_report_rule.put()
self.assertTrue(self.any_report_rule.payments_enabled())
self.process = ProcessTask.Create(self.e)
self.process.Update(rule_ids=[self.any_report_rule.key().id()])
self.process.put()
# Apply our process to our sensor
self.sp = SensorProcessTask.Create(self.e, self.process,
self.smartphone_sensor)
self.sp.put()
BATCH_SIZE = 3
BATCH_1 = {
'agreement': [random.randint(1, 5) for x in range(BATCH_SIZE)],
}
self.__createNewRecords(BATCH_1,
first_dt=datetime.now(),
sensor=self.smartphone_sensor)
self.__runProcessing()
# This batch should have fired 3 alarms for any report, and created
# 3 payments.
pmnts = Payment.Fetch(self.owner)
self.assertEqual(len(pmnts), 3)
total_payments = BATCH_SIZE * PMNT_AMOUNT
self.assertEqual(total_payments, sum([p.amount for p in pmnts]))
def testGeoFenceAlarm(self):
self.geosensor = SensorType.Create(self.e)
schema = {
'location': {
'unit': 'deg',
'label': "Location",
'role': [COLUMN.LOCATION],
'type': 'latlng'
}
}
self.geosensor.Update(name="Geo Sensor", schema=json.dumps(schema))
self.geosensor.put()
# Create off route alarm
self.offroute_alarm = Rule.Create(self.e)
self.offroute_alarm.Update(name="Off Route",
sensortype_id=self.spedometer.key().id(),
column="location",
trigger=RULE.GEOFENCE_OUT,
value_complex=json.dumps(DUMMY_GEOFENCE))
self.offroute_alarm.put()
self.process = ProcessTask.Create(self.e)
self.process.Update(rule_ids=[self.offroute_alarm.key().id()])
self.process.put()
self.vehicle_2 = Sensor.Create(self.e, TEST_SENSOR_ID,
self.geosensor.key().id())
self.vehicle_2.Update(name="Vehicle Sensor 2")
# Apply our process to our sensor
self.sp = SensorProcessTask.Create(self.e, self.process,
self.vehicle_2)
self.sp.put()
# Process 8 location datapoints (3 in bounds, 3 out, 2 back in)
BATCH_1 = {
'location':
["%s,%s" % (coord[0], coord[1]) for coord in ROUTE_DIVERSION]
}
self.__createNewRecords(BATCH_1,
first_dt=datetime.now() -
timedelta(minutes=20),
interval_secs=30)
self.__runProcessing()
# Confirm off-route alarm fired upon datapoint 4, and deactivates on 7 (back in fence)
alarms = Alarm.Fetch(self.vehicle_2, self.offroute_alarm)
self.assertEqual(len(alarms), 1)
a = alarms[0]
first_record_in_alarm = a.first_record
self.assertEqual(a.duration().seconds,
60) # 3 datapoints, 30 second gap
oob_record = ROUTE_DIVERSION[3]
self.assertEqual(first_record_in_alarm.columnValue('location'),
"%s,%s" % (oob_record[0], oob_record[1]))
def testAlarmPeriodLimit(self):
# Create hard braking (boolean) alarm
self.brake_rule = Rule.Create(self.e)
self.brake_rule.Update(name="Braking",
sensortype_id=self.spedometer.key().id(),
column="hard_braking",
trigger=RULE.CEILING,
consecutive_limit=RULE.ANY,
value2=0.0,
alert_contacts=["owner"],
plimit_type=RULE.HOUR,
plimit=1) # 1 alarm each hour
self.brake_rule.put()
self.process = ProcessTask.Create(self.e)
self.process.Update(rule_ids=[self.brake_rule.key().id()])
self.process.put()
# Apply our process to our sensor
self.sp = SensorProcessTask.Create(self.e, self.process,
self.vehicle_1)
self.sp.put()
# Batch 1 creates 1 alarm in 11am window, skips second alarm
# and then creates another alarm in 12pm window.
start = datetime(2016, 1, 1, 11, 57) # 11:57am 2016-01-01
BATCH_1 = {
# v below should alarm, s should skip (already 1 in same period)
# | is passing an hour marker (12pm)
# v s | v
'hard_braking': [0, 1, 1, 0, 1]
}
self.__createNewRecords(BATCH_1, first_dt=start, interval_secs=60)
self.__runProcessing()
alarms = Alarm.Fetch(self.vehicle_1, self.brake_rule)
self.assertEqual(len(alarms), 2) # 1 in each hour
last_alarm = alarms[-1]
self.assertTrue(last_alarm.dt_start.hour, 12)
self.assertTrue(last_alarm.dt_start.minute, 1)
# Batch 2 fetches the prior 12pm window alarm, and fails to create
# second alarm.
start = datetime(2016, 1, 1, 12, 2) # 12:02pm 2016-01-01
BATCH_2 = {
# s s
'hard_braking': [0, 0, 1, 0, 1]
}
self.__createNewRecords(BATCH_2, first_dt=start, interval_secs=60)
self.__runProcessing()
alarms = Alarm.Fetch(self.vehicle_1, self.brake_rule)
self.assertEqual(len(alarms), 2) # still 2, no new alarms created
def testGeoProcessing(self):
self.process = ProcessTask.Create(self.e)
spec = json.dumps({
'processers': [{
'calculation': '. + DISTANCE({location})',
'column': 'total_distance',
'analysis_key_pattern': ANALYSIS_KEY_PATTERN
}]
})
self.process.Update(spec=spec)
self.process.put()
# Apply our process to our sensor
self.sp = SensorProcessTask.Create(self.e, self.process,
self.vehicle_1)
self.sp.put()
loc = db.GeoPt(1.3, 36)
MOVE_SIZE = 5 # m
N_POINTS = 150 # 2 batches in process worker
DELAY_SECS = 1
now = datetime.now()
# Populate dummy data with random moves
total_distance = 0.0
locations = []
last_gp = None
for x in range(N_POINTS):
locations.append(str(loc))
now += timedelta(seconds=DELAY_SECS)
bearing = random.random() * 180
loc = tools.geoOffset(loc, bearing, MOVE_SIZE / 1000.)
if last_gp:
total_distance += MOVE_SIZE
last_gp = loc
BATCH_1 = {'location': locations}
self.__createNewRecords(BATCH_1, first_dt=datetime.now())
self.__runProcessing()
# Confirm analyzed distance
a = Analysis.GetOrCreate(self.vehicle_1, ANALYSIS_KEY_PATTERN)
self.assertIsNotNone(a)
# Almost equal becuase we miss the distance between batches (FIX)
self.assertAlmostEqual(a.columnValue('total_distance'),
total_distance,
delta=MOVE_SIZE)
def testCrossBatchAlarm(self):
# TODO: Make this actually test analysis across batches (fetch prior active alarms)
self.process = ProcessTask.Create(self.e)
self.process.Update(rule_ids=[self.speeding_alarm.key().id()])
self.process.put()
now = datetime.now()
# Apply our process to our sensor
self.sp = SensorProcessTask.Create(self.e, self.process,
self.vehicle_1)
self.sp.put()
BATCH_1 = {
'speed': [0, 5, 15, 90, 93, 90]
} # Speeding ends on last data point
BATCH_2 = {
'speed': [70, 50, 0, 0, 50, 90]
} # Second speeding starts on last
BATCH_3 = {
'speed': [91, 85, 60, 1, 0, 0]
} # Second speeding ends on second datapoint
self.__createNewRecords(BATCH_1, first_dt=now - timedelta(minutes=6))
self.__createNewRecords(BATCH_2, first_dt=now - timedelta(minutes=4))
self.__createNewRecords(BATCH_3, first_dt=now - timedelta(minutes=2))
self.__runProcessing()
# Confirm 2 alarms, second straddling batch 2 and 3
alarms = Alarm.Fetch(self.vehicle_1, self.speeding_alarm)
self.assertEqual(len(alarms), 2)
# Most recent first
a2 = alarms[0]
a1 = alarms[1]
self.assertEqual(a1.duration().seconds,
6) # 3 datapoints, 3 second gap
self.assertEqual(a1.apex, 93)
self.assertTrue(a2.duration().seconds >
30) # 2 datapoints, large gap between batch 2 & 3
self.assertEqual(a2.apex, 91)
def testAlarmBuffer(self):
# Create hard braking (boolean) alarm
self.brake_alarm = Rule.Create(self.e)
self.brake_alarm.Update(
name="Braking",
sensortype_id=self.spedometer.key().id(),
column="hard_braking",
trigger=RULE.CEILING,
value2=0.0,
alert_contacts=["owner"],
buffer=30000, # 30 s
duration=0)
self.brake_alarm.put()
self.process = ProcessTask.Create(self.e)
self.process.Update(rule_ids=[self.brake_alarm.key().id()])
self.process.put()
# Apply our process to our sensor
self.sp = SensorProcessTask.Create(self.e, self.process,
self.vehicle_1)
self.sp.put()
BATCH_1 = {
# v below should alarm, s are skipped since they fall within 30s buffer
# v s s s v
'hard_braking':
[0, 0, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0] # Alternative boolean alarms
}
self.__createNewRecords(BATCH_1,
first_dt=datetime.now() - timedelta(minutes=5),
interval_secs=5)
self.__runProcessing()
# Confirm braking alarms (2)
alarms = Alarm.Fetch(self.vehicle_1, self.brake_alarm)
self.assertEqual(len(alarms), 2)
def testGeoRadiusAlarm(self):
# Create in radius alarm
self.in_radius_alarm = Rule.Create(self.e)
self.in_radius_alarm.Update(
name="In Town",
sensortype_id=self.tracker.key().id(),
column="location",
trigger=RULE.GEORADIUS_IN,
value2=RADIUS, # m
value_complex=json.dumps(RADIUS_CENTER),
alert_contacts=["owner"],
consecutive_limit=RULE.DISABLED,
duration=0)
self.in_radius_alarm.put()
self.process = ProcessTask.Create(self.e)
self.process.Update(rule_ids=[self.in_radius_alarm.key().id()])
self.process.put()
self.vehicle_2 = Sensor.Create(self.e, TEST_SENSOR_ID,
self.tracker.key().id())
self.vehicle_2.Update(name="Vehicle Sensor 2")
# Apply our process to our sensor
self.sp = SensorProcessTask.Create(self.e, self.process,
self.vehicle_2)
self.sp.put()
INTERVAL_SECS = 4
test_data_start = datetime.now() - timedelta(minutes=20)
# Process first data points entering radius
BATCH_1 = {
'location':
["%s,%s" % (coord[0], coord[1]) for coord in ENTERS_RADIUS]
}
last_record = self.__createNewRecords(BATCH_1,
first_dt=test_data_start,
interval_secs=INTERVAL_SECS)
self.__runProcessing()
# Confirm in-radius alarm fired upon datapoint 4...
alarms = Alarm.Fetch(self.vehicle_2, self.in_radius_alarm)
self.assertEqual(len(alarms), 1)
a = alarms[0]
# Process second batch of data points exiting radius
BATCH_2 = {
'location':
["%s,%s" % (coord[0], coord[1]) for coord in EXITS_RADIUS]
}
self.__createNewRecords(BATCH_2, interval_secs=INTERVAL_SECS)
self.__runProcessing()
# Confirm we still just have the single alarm record
alarms = Alarm.Fetch(self.vehicle_2, self.in_radius_alarm)
self.assertEqual(len(alarms), 1)
a = alarms[0]
duration_td = a.duration()
self.assertIsNotNone(duration_td)
# 3 datapoints in radius
print a.json()
def testCeilingAlarmAndStandardProcessing(self):
self.process = ProcessTask.Create(self.e)
spec = json.dumps({
'processers': [{
'calculation': 'MAX({speed})',
'column': 'max_speed',
'analysis_key_pattern': ANALYSIS_KEY_PATTERN
}, {
'calculation': '. + SUM({bearing})',
'column': 'total_bearing',
'analysis_key_pattern': ANALYSIS_KEY_PATTERN
}, {
'calculation': '. + COUNT({bearing})',
'column': 'count_bearing',
'analysis_key_pattern': ANALYSIS_KEY_PATTERN
}, {
'calculation': '. + COUNT(ALARMS())',
'column': 'count_alarms',
'analysis_key_pattern': ANALYSIS_KEY_PATTERN
}]
})
self.process.Update(spec=spec,
rule_ids=[self.speeding_alarm.key().id()])
self.process.put()
# Apply our process to our sensor
self.sp = SensorProcessTask.Create(self.e, self.process,
self.vehicle_1)
self.sp.put()
BATCH_1 = {
'speed': [
0, 5, 15, 35, 60, 80, 83, 88, 85, 78, 75, 75, 76, 81, 89, 92,
90, 83, 78
], # We speed twice
'bearing':
[0, 0, 0, 0, 5, 3, 3, 3, 4, 5, 0, 0, 0, 0, 1, 1, 2, 3, 2]
}
self.__createNewRecords(BATCH_1,
first_dt=datetime.now() - timedelta(minutes=5))
self.__runProcessing()
# Confirm analyzed max speed
a = Analysis.GetOrCreate(self.vehicle_1, ANALYSIS_KEY_PATTERN)
self.assertIsNotNone(a)
self.assertEqual(a.columnValue('max_speed'), max(BATCH_1['speed']))
# Confirm we counted new alarms in analysis
# self.assertEqual(a.columnValue('count_alarms'), 2) TODO: This fails!
self.sp = SensorProcessTask.Get(self.process, self.vehicle_1)
self.assertEqual(self.sp.status_last_run, PROCESS.OK)
# Confirm speeding alarms (2)
alarms = Alarm.Fetch(self.vehicle_1, self.speeding_alarm)
self.assertEqual(len(alarms), 2)
# Test alarm notifications
# TODO: Test output of notification (e.g. log messages or contact records)
a = alarms[0] # second alarm
message = a.render_alert_message(recipient=self.owner)
SPEEDING_ALERT_MESSAGE_RENDERED = "Hello Dan Owner, %s was speeding at 81 at %s" % (
TEST_SENSOR_ID,
tools.sdatetime(a.dt_start, fmt="%H:%M", tz="Africa/Nairobi"))
self.assertEqual(message, SPEEDING_ALERT_MESSAGE_RENDERED)
BATCH_2 = {'speed': [76, 75, 78, 73, 60], 'bearing': [0, 0, 2, 0, 5]}
self.__createNewRecords(BATCH_2)
self.__runProcessing()
a = Analysis.GetOrCreate(self.vehicle_1, ANALYSIS_KEY_PATTERN)
self.assertEqual(a.columnValue('total_bearing'),
sum(BATCH_1['bearing']) + sum(BATCH_2['bearing']))
self.assertEqual(a.columnValue('count_bearing'),
len(BATCH_1['bearing']) + len(BATCH_2['bearing']))
self.assertEqual(a.columnValue('count_alarms'), 2)
self.assertEqual(self.sp.status_last_run, PROCESS.OK)
