def on_btn_duplicate_clicked(self, clicked=None):
if clicked == None: return
if not mc.objExists(self.__blendShape): return
self.__sculpmodel = mc.duplicate(
self.__baseModel,
n=nameTool.compileMayaObjectName(
'%s_Sculp' % self.__baseModel.split(':')[-1]))[0]
openCloseDeformer(self.__baseModel, 0)
self.__tempmodel = mc.duplicate(
self.__baseModel,
n=nameTool.compileMayaObjectName(
'%s_Temp' % self.__baseModel.split(':')[-1]))[0]
openCloseDeformer(self.__baseModel, 1)
for attr in ('tx', 'ty', 'tz', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz'):
mc.setAttr('%s.%s' % (self.__sculpmodel, attr),
l=False,
k=True,
cb=True)
mc.setAttr('%s.%s' % (self.__tempmodel, attr),
l=False,
k=True,
cb=True)
mc.move(mc.getAttr('%s.bbmx' % self.__baseModel)[0][0] -
mc.getAttr('%s.bbmn' % self.__baseModel)[0][0],
0,
0,
self.__sculpmodel,
r=True)
mc.move(mc.getAttr('%s.bbmx' % self.__sculpmodel)[0][0] -
mc.getAttr('%s.bbmn' % self.__baseModel)[0][0],
0,
0,
self.__tempmodel,
r=True)
#- add BlendShape
tempBlend = mc.blendShape(self.__sculpmodel, self.__tempmodel)[0]
tempBlendAttr = mc.aliasAttr(tempBlend, q=True)[0]
#- set key
mc.setKeyframe('%s.%s' % (tempBlend, tempBlendAttr), t=0, v=0)
mc.setKeyframe('%s.%s' % (tempBlend, tempBlendAttr), t=24, v=1)
keyName = mc.keyframe('%s.%s' % (tempBlend, tempBlendAttr),
q=True,
n=True)
mc.keyTangent(keyName, e=True, itt="spline", ott="spline")
def on_btn_FixBsBsEnd_clicked(self, clicked=None):
if clicked == None:return
#-
selectIndexes = self.listView_attributeList.selectedIndexes()
if len(selectIndexes) == 0:return
selectAttr = self.__AttributeModel.data(selectIndexes[0], QtCore.Qt.DisplayRole)
if not uiTool.warning('BlendShape\'s shape on attribute "%s" will be changed,\nand it can\'t to undo, \ncontinue? ?'%selectAttr):return
#- dup model
openCloseDeformer(self.__baseModel, 0)
midModel = mc.duplicate(self.__baseModel, n=nameTool.compileMayaObjectName('%s_mid'%self.__baseModel.split(':')[-1]))[0]
openCloseDeformer(self.__baseModel, 1)
#- add blendShape
mc.blendShape(self.__sculpmodel, self.__baseModel, midModel, w=((0, 1), (1, -1)))
mc.delete(midModel, ch=True)
if mc.objExists(selectAttr):
mc.blendShape(midModel, selectAttr, w=((0, 1)))
mc.delete(selectAttr, ch=True)
mc.delete(midModel)
else:
shape = mc.listRelatives(midModel, s=True, path=True)[0]
weightID = self.__AttributeDT2.get(selectAttr, None)
TGTattr = self.__IGTAttributeDT.get(weightID, None)
mc.connectAttr('%s.worldMesh[0]'%shape, '%s.%s'%(self.__blendShape, TGTattr), f=True)
mc.rename(midModel, selectAttr)
mc.delete(self.__sculpmodel)
mc.delete(self.__tempmodel)
def on_btn_duplicate_clicked(self, clicked=None):
if clicked == None:return
if not mc.objExists(self.__blendShape):return
self.__sculpmodel = mc.duplicate(self.__baseModel, n=nameTool.compileMayaObjectName('%s_Sculp'%self.__baseModel.split(':')[-1]))[0]
openCloseDeformer(self.__baseModel, 0)
self.__tempmodel = mc.duplicate(self.__baseModel, n=nameTool.compileMayaObjectName('%s_Temp'%self.__baseModel.split(':')[-1]))[0]
openCloseDeformer(self.__baseModel, 1)
for attr in ('tx', 'ty', 'tz','rx', 'ry', 'rz','sx', 'sy', 'sz'):
mc.setAttr('%s.%s'%(self.__sculpmodel, attr), l=False, k=True, cb=True)
mc.setAttr('%s.%s'%(self.__tempmodel, attr), l=False, k=True, cb=True)
mc.move(mc.getAttr('%s.bbmx'%self.__baseModel)[0][0] - mc.getAttr('%s.bbmn'%self.__baseModel)[0][0], 0, 0, self.__sculpmodel, r=True)
mc.move(mc.getAttr('%s.bbmx'%self.__sculpmodel)[0][0] - mc.getAttr('%s.bbmn'%self.__baseModel)[0][0], 0, 0, self.__tempmodel, r=True)
#- add BlendShape
tempBlend = mc.blendShape(self.__sculpmodel, self.__tempmodel)[0]
tempBlendAttr = mc.aliasAttr(tempBlend, q=True)[0]
#- set key
mc.setKeyframe('%s.%s'%(tempBlend, tempBlendAttr), t=0, v=0)
mc.setKeyframe('%s.%s'%(tempBlend, tempBlendAttr), t=24, v=1)
keyName = mc.keyframe('%s.%s'%(tempBlend, tempBlendAttr), q=True, n=True)
mc.keyTangent(keyName, e=True, itt="spline", ott="spline")
def duplicateScupModel(self):
self.__sculpmodel = mc.duplicate(
self.__baseModel,
n=nameTool.compileMayaObjectName(
'%s_Sculp' % self.__baseModel.split(':')[-1]))[0]
for attr in ('tx', 'ty', 'tz', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz'):
mc.setAttr('%s.%s' % (self.__sculpmodel, attr),
l=False,
k=True,
cb=True)
mc.move(mc.getAttr('%s.bbmx' % self.__baseModel)[0][0] -
mc.getAttr('%s.bbmn' % self.__baseModel)[0][0],
0,
0,
self.__sculpmodel,
r=True)
def on_btn_FixBsBsEnd_clicked(self, clicked=None):
if clicked == None: return
#-
selectIndexes = self.listView_attributeList.selectedIndexes()
if len(selectIndexes) == 0: return
selectAttr = self.__AttributeModel.data(selectIndexes[0],
QtCore.Qt.DisplayRole)
if not uiTool.warning(
'BlendShape\'s shape on attribute "%s" will be changed,\nand it can\'t to undo, \ncontinue? ?'
% selectAttr):
return
#- dup model
openCloseDeformer(self.__baseModel, 0)
midModel = mc.duplicate(
self.__baseModel,
n=nameTool.compileMayaObjectName(
'%s_mid' % self.__baseModel.split(':')[-1]))[0]
openCloseDeformer(self.__baseModel, 1)
#- add blendShape
mc.blendShape(self.__sculpmodel,
self.__baseModel,
midModel,
w=((0, 1), (1, -1)))
mc.delete(midModel, ch=True)
if mc.objExists(selectAttr):
mc.blendShape(midModel, selectAttr, w=((0, 1)))
mc.delete(selectAttr, ch=True)
mc.delete(midModel)
else:
shape = mc.listRelatives(midModel, s=True, path=True)[0]
weightID = self.__AttributeDT2.get(selectAttr, None)
TGTattr = self.__IGTAttributeDT.get(weightID, None)
mc.connectAttr('%s.worldMesh[0]' % shape,
'%s.%s' % (self.__blendShape, TGTattr),
f=True)
mc.rename(midModel, selectAttr)
mc.delete(self.__sculpmodel)
mc.delete(self.__tempmodel)
def dupliacteTempModel(self):
openCloseDeformer(self.__baseModel, 0)
self.__tempmodel = mc.duplicate(
self.__baseModel,
n=nameTool.compileMayaObjectName(
'%s_Temp' % self.__baseModel.split(':')[-1]))[0]
openCloseDeformer(self.__baseModel, 1)
for attr in ('tx', 'ty', 'tz', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz'):
mc.setAttr('%s.%s' % (self.__tempmodel, attr),
l=False,
k=True,
cb=True)
mc.move((mc.getAttr('%s.bbmx' % self.__baseModel)[0][0] -
mc.getAttr('%s.bbmn' % self.__baseModel)[0][0]) * 2,
0,
0,
self.__tempmodel,
r=True)
#- add BlendShape
tempBlend = mc.blendShape(self.__sculpmodel, self.__tempmodel)[0]
tempBlendAttr = mc.aliasAttr(tempBlend, q=True)[0]
#- set key
startFrame = mc.playbackOptions(q=True, min=True)
endFrame = mc.playbackOptions(q=True, max=True)
mc.setKeyframe('%s.%s' % (tempBlend, tempBlendAttr),
t=startFrame,
v=0.0)
mc.setKeyframe('%s.%s' % (tempBlend, tempBlendAttr), t=endFrame, v=1.0)
#- edit Key Type
keyName = mc.keyframe('%s.%s' % (tempBlend, tempBlendAttr),
q=True,
n=True)
mc.keyTangent(keyName, e=True, itt="spline", ott="spline")
def dupliacteTempModel(self):
openCloseDeformer(self.__baseModel, 0)
self.__tempmodel = mc.duplicate(self.__baseModel, n=nameTool.compileMayaObjectName('%s_Temp'%self.__baseModel.split(':')[-1]))[0]
openCloseDeformer(self.__baseModel, 1)
for attr in ('tx', 'ty', 'tz','rx', 'ry', 'rz','sx', 'sy', 'sz'):
mc.setAttr('%s.%s'%(self.__tempmodel, attr), l=False, k=True, cb=True)
mc.move((mc.getAttr('%s.bbmx'%self.__baseModel)[0][0] - mc.getAttr('%s.bbmn'%self.__baseModel)[0][0])*2, 0, 0, self.__tempmodel, r=True)
#- add BlendShape
tempBlend = mc.blendShape(self.__sculpmodel, self.__tempmodel)[0]
tempBlendAttr = mc.aliasAttr(tempBlend, q=True)[0]
#- set key
startFrame = mc.playbackOptions(q=True, min=True)
endFrame = mc.playbackOptions(q=True, max=True)
mc.setKeyframe('%s.%s'%(tempBlend, tempBlendAttr), t=startFrame, v=0.0)
mc.setKeyframe('%s.%s'%(tempBlend, tempBlendAttr), t=endFrame, v=1.0)
#- edit Key Type
keyName = mc.keyframe('%s.%s'%(tempBlend, tempBlendAttr), q=True, n=True)
mc.keyTangent(keyName, e=True, itt="spline", ott="spline")
def duplicateScupModel(self):
self.__sculpmodel = mc.duplicate(self.__baseModel, n=nameTool.compileMayaObjectName('%s_Sculp'%self.__baseModel.split(':')[-1]))[0]
for attr in ('tx', 'ty', 'tz','rx', 'ry', 'rz','sx', 'sy', 'sz'):
mc.setAttr('%s.%s'%(self.__sculpmodel, attr), l=False, k=True, cb=True)
mc.move(mc.getAttr('%s.bbmx'%self.__baseModel)[0][0] - mc.getAttr('%s.bbmn'%self.__baseModel)[0][0], 0, 0, self.__sculpmodel, r=True)
def _mayaRename(self):
baseNameList, resultNameList = self.__listModel.result()
baseNameList = [pymel.core.PyNode(x) for x in baseNameList]
for node, newName in zip(baseNameList, resultNameList):
mc.rename(node.name(), nameTool.compileMayaObjectName(newName))