Beispiel #1
0
def main():
    global ws
    global loop
    global config
    lock = PIDLock("voice")
    ws = WebsocketClient()
    config = Configuration.get()
    Configuration.init(ws)
    loop = RecognizerLoop()
    loop.on('recognizer_loop:utterance', handle_utterance)
    loop.on('speak', handle_speak)
    loop.on('recognizer_loop:record_begin', handle_record_begin)
    loop.on('recognizer_loop:wakeword', handle_wakeword)
    loop.on('recognizer_loop:record_end', handle_record_end)
    loop.on('recognizer_loop:no_internet', handle_no_internet)
    ws.on('open', handle_open)
    ws.on('complete_intent_failure', handle_complete_intent_failure)
    ws.on('recognizer_loop:sleep', handle_sleep)
    ws.on('recognizer_loop:wake_up', handle_wake_up)
    ws.on('mycroft.mic.mute', handle_mic_mute)
    ws.on('mycroft.mic.unmute', handle_mic_unmute)
    ws.on("mycroft.paired", handle_paired)
    ws.on('recognizer_loop:audio_output_start', handle_audio_start)
    ws.on('recognizer_loop:audio_output_end', handle_audio_end)
    ws.on('mycroft.stop', handle_stop)
    event_thread = Thread(target=connect)
    event_thread.setDaemon(True)
    event_thread.start()

    try:
        loop.run()
    except KeyboardInterrupt, e:
        LOG.exception(e)
        sys.exit()
Beispiel #2
0
def main():
    global ws
    global loop
    reset_sigint_handler()
    PIDLock("voice")
    ws = WebsocketClient()
    Configuration.init(ws)
    loop = RecognizerLoop()
    loop.on('recognizer_loop:utterance', handle_utterance)
    loop.on('recognizer_loop:speech.recognition.unknown', handle_unknown)
    loop.on('speak', handle_speak)
    loop.on('recognizer_loop:record_begin', handle_record_begin)
    loop.on('recognizer_loop:awoken', handle_awoken)
    loop.on('recognizer_loop:wakeword', handle_wakeword)
    loop.on('recognizer_loop:record_end', handle_record_end)
    loop.on('recognizer_loop:no_internet', handle_no_internet)
    ws.on('open', handle_open)
    ws.on('complete_intent_failure', handle_complete_intent_failure)
    ws.on('recognizer_loop:sleep', handle_sleep)
    ws.on('recognizer_loop:wake_up', handle_wake_up)
    ws.on('mycroft.mic.mute', handle_mic_mute)
    ws.on('mycroft.mic.unmute', handle_mic_unmute)
    ws.on('mycroft.mic.get_status', handle_mic_get_status)
    ws.on("mycroft.paired", handle_paired)
    ws.on('recognizer_loop:audio_output_start', handle_audio_start)
    ws.on('recognizer_loop:audio_output_end', handle_audio_end)
    ws.on('mycroft.stop', handle_stop)

    create_daemon(ws.run_forever)
    create_daemon(loop.run)

    wait_for_exit_signal()
Beispiel #3
0
def main():
    global ws
    global loop
    lock = PIDLock("voice")
    ws = WebsocketClient()
    tts.init(ws)
    ConfigurationManager.init(ws)
    loop = RecognizerLoop()
    loop.on('recognizer_loop:utterance', handle_utterance)
    loop.on('recognizer_loop:record_begin', handle_record_begin)
    loop.on('recognizer_loop:wakeword', handle_wakeword)
    loop.on('recognizer_loop:record_end', handle_record_end)
    loop.on('speak', handle_speak)
    ws.on('open', handle_open)
    ws.on('speak', handle_speak)
    ws.on('multi_utterance_intent_failure',
          handle_multi_utterance_intent_failure)
    ws.on('recognizer_loop:sleep', handle_sleep)
    ws.on('recognizer_loop:wake_up', handle_wake_up)
    ws.on('mycroft.stop', handle_stop)
    ws.on("mycroft.paired", handle_paired)
    event_thread = Thread(target=connect)
    event_thread.setDaemon(True)
    event_thread.start()

    try:
        loop.run()
    except KeyboardInterrupt, e:
        logger.exception(e)
        event_thread.exit()
        sys.exit()
Beispiel #4
0
def main(ready_hook=on_ready,
         error_hook=on_error,
         stopping_hook=on_stopping,
         watchdog=lambda: None):
    global bus
    global loop
    global config
    try:
        reset_sigint_handler()
        PIDLock("voice")
        config = Configuration.get()
        bus = start_message_bus_client("VOICE")
        connect_bus_events(bus)
        callbacks = StatusCallbackMap(on_ready=ready_hook,
                                      on_error=error_hook,
                                      on_stopping=stopping_hook)
        status = ProcessStatus('speech', bus, callbacks)

        # Register handlers on internal RecognizerLoop bus
        loop = RecognizerLoop(watchdog)
        connect_loop_events(loop)
        create_daemon(loop.run)
        status.set_started()
    except Exception as e:
        error_hook(e)
    else:
        status.set_ready()
        wait_for_exit_signal()
        status.set_stopping()
Beispiel #5
0
def main():
    global ws
    global loop
    global config
    global tts
    global tts_hash
    lock = PIDLock("voice")
    ws = WebsocketClient()
    config = ConfigurationManager.get()
    tts = TTSFactory.create()
    tts.init(ws)
    tts_hash = config.get('tts')
    ConfigurationManager.init(ws)
    loop = RecognizerLoop()
    loop.on('recognizer_loop:utterance', handle_utterance)
    loop.on('recognizer_loop:record_begin', handle_record_begin)
    loop.on('recognizer_loop:wakeword', handle_wakeword)
    loop.on('recognizer_loop:record_end', handle_record_end)
    loop.on('speak', handle_speak)
    loop.on('recognizer_loop:no_internet', handle_no_internet)
    ws.on('open', handle_open)
    ws.on('speak', handle_speak)
    ws.on(
        'multi_utterance_intent_failure',
        handle_multi_utterance_intent_failure)
    ws.on('recognizer_loop:sleep', handle_sleep)
    ws.on('recognizer_loop:wake_up', handle_wake_up)
    ws.on('mycroft.mic.mute', handle_mic_mute)
    ws.on('mycroft.mic.unmute', handle_mic_unmute)
    ws.on('mycroft.stop', handle_stop)
    ws.on("mycroft.paired", handle_paired)
    ws.on('recognizer_loop:audio_output_start', handle_audio_start)
    ws.on('recognizer_loop:audio_output_end', handle_audio_end)
    event_thread = Thread(target=connect)
    event_thread.setDaemon(True)
    event_thread.start()

    try:
        loop.run()
    except KeyboardInterrupt, e:
        tts.playback.stop()
        tts.playback.join()
        logger.exception(e)
        sys.exit()
Beispiel #6
0
def main():
    rospy.init_node('mycroft_stt')
    rospy.loginfo(rospy.get_caller_id() + " started")
    global bus
    global loop
    global config
    reset_sigint_handler()
    PIDLock("voice")
    bus = WebsocketClient()  # Mycroft messagebus, see mycroft.messagebus
    Configuration.init(bus)
    config = Configuration.get()

    # Register handlers on internal RecognizerLoop bus
    loop = RecognizerLoop()
    loop.on('recognizer_loop:utterance', handle_utterance)
    loop.on('recognizer_loop:speech.recognition.unknown', handle_unknown)
    loop.on('speak', handle_speak)
    loop.on('recognizer_loop:record_begin', handle_record_begin)
    loop.on('recognizer_loop:awoken', handle_awoken)
    loop.on('recognizer_loop:wakeword', handle_wakeword)
    loop.on('recognizer_loop:record_end', handle_record_end)
    loop.on('recognizer_loop:no_internet', handle_no_internet)

    # Register handlers for events on main Mycroft messagebus
    bus.on('open', handle_open)
    bus.on('complete_intent_failure', handle_complete_intent_failure)
    bus.on('recognizer_loop:sleep', handle_sleep)
    bus.on('recognizer_loop:wake_up', handle_wake_up)
    bus.on('mycroft.mic.mute', handle_mic_mute)
    bus.on('mycroft.mic.unmute', handle_mic_unmute)
    bus.on('mycroft.mic.get_status', handle_mic_get_status)
    bus.on("mycroft.paired", handle_paired)
    bus.on('recognizer_loop:audio_output_start', handle_audio_start)
    bus.on('recognizer_loop:audio_output_end', handle_audio_end)
    bus.on('mycroft.stop', handle_stop)

    create_daemon(bus.run_forever)
    create_daemon(loop.run)

    wait_for_exit_signal()
    rospy.spin()
Beispiel #7
0
def main(ready_hook=on_ready, error_hook=on_error, stopping_hook=on_stopping,
         watchdog=lambda: None):
    global bus
    global loop
    global config
    try:
        reset_sigint_handler()
        PIDLock("voice")
        bus = MessageBusClient()  # Mycroft messagebus, see mycroft.messagebus
        Configuration.set_config_update_handlers(bus)
        config = Configuration.get()

        # Register handlers on internal RecognizerLoop bus
        loop = RecognizerLoop(watchdog)
        connect_loop_events(loop)
        connect_bus_events(bus)
        create_daemon(bus.run_forever)
        create_daemon(loop.run)
    except Exception as e:
        error_hook(e)
    else:
        ready_hook()
        wait_for_exit_signal()
        stopping_hook()