Beispiel #1
0
def genMsgForDevs():
	okDev=[]
	errorInfo=[]
	nt=datetime.datetime.now()
	now=("%s"%(nt))[:19]  #
	last=("%s"%(nt-datetime.timedelta(0,2*24*60*60)))[:19]  #两天前
#	for device in iclock.objects.exclude(DelTag=1).exclude(State=DEV_STATUS_PAUSE).exclude(LastActivity__lt=last):
	for sc in IclockMsg.objects.filter(StartTime__lt=now):#.exclude(EndTime__lt=last):
		device=sc.Device()
		try:
			start = ("%s"%sc.StartTime)[:19]
			diff = timeDiffMin(sc.EndTime, sc.StartTime)
			if not sc.EndTime or sc.EndTime>nt: ##没有结束时间,或结束时间还没有到,进行正常发送信息服务
				if sc.MsgType==M_WEATHER: # weather forecast
					checkWeatherForDev(device)
				elif sc.MsgType in (M_NEWS, M_SYS_NOTES):
					checkNewsForDev(device, sc.MsgType, sc.MsgParam, now, start, diff, sc.LastTime)
				elif (sc.MsgType in (M_DEPT_NOTES, M_DEPT_SMS)) and not sc.LastTime:
					checkNewsForDev(device, sc.MsgType, sc.MsgParam, now, start, diff)
				elif (sc.MsgType in [M_PRIV_SMS, ]) and not sc.LastTime:
					appendDevCmd(device, "SMS TAG=0x%X\tUID=%s\tMIN=%s\tStartTime=%s\tMSG=%s"%(0xFE, sc.MsgParam, diff, start, sc.MsgContent))
			elif (sc.LastTime and sc.LastTime<sc.EndTime): #已到结束时间,并且还没有处理结束工作
				#进行结束定制信息的处理
				pass
			sc.LastTime=now
			sc.save()
			okDev.append("%s"%device)
		except Exception, e:
			errorInfo.append("Error To Service messeges for %s: %s"%(device, e))
Beispiel #2
0
def genMsgForDevs():
    okDev = []
    errorInfo = []
    nt = datetime.datetime.now()
    now = ('%s' % nt)[:19]
    last = ('%s' % (nt - datetime.timedelta(0, 172800)))[:19]
    for sc in IclockMsg.objects.filter(StartTime__lt=now):
        device = sc.Device()
        try:
            start = ('%s' % sc.StartTime)[:19]
            diff = timeDiffMin(sc.EndTime, sc.StartTime)
            if not sc.EndTime or sc.EndTime > nt:
                if sc.MsgType == M_WEATHER:
                    checkWeatherForDev(device)
                elif sc.MsgType in (M_NEWS, M_SYS_NOTES):
                    checkNewsForDev(device, sc.MsgType, sc.MsgParam, now,
                                    start, diff, sc.LastTime)
                elif sc.MsgType in (M_DEPT_NOTES,
                                    M_DEPT_SMS) and not sc.LastTime:
                    checkNewsForDev(device, sc.MsgType, sc.MsgParam, now,
                                    start, diff)
                elif sc.MsgType in [M_PRIV_SMS] and not sc.LastTime:
                    appendDevCmd(
                        device,
                        'SMS TAG=0x%X\tUID=%s\tMIN=%s\tStartTime=%s\tMSG=%s' %
                        (254, sc.MsgParam, diff, start, sc.MsgContent))
            else:
                if sc.LastTime and sc.LastTime < sc.EndTime:
                    pass
            sc.LastTime = now
            sc.save()
            okDev.append('%s' % device)
        except Exception, e:
            errorInfo.append('Error To Service messeges for %s: %s' %
                             (device, e))
Beispiel #3
0
def checkNewsForDev(device, type, param, now, start, mins, LastTime=None):
	for info in messages.objects.filter(StartTime__lt=now):
		if info.EndTime and info.EndTime<now: continue
		msg=info.MsgContent
		if type in [M_DEPT_NOTES, M_DEPT_SMS]: #检查并发送属于本部门的信息
			if not (not device.DeptID_id or (device.DeptID_id==info.DeptID_id)): msg=""	
		elif LastTime and info.StartTime<=LastTime:
			msg=""
		if msg:							 
			appendDevCmd(device, "SMS TAG=0x%X\tUID=1\tMIN=%s\tStartTime=%s\tMSG=%s"%(0xFD, mins, start, lcdMsg(msg)))	
Beispiel #4
0
def checkDevice(request, response):
	#by super 2010-08-26 增加push sdk协议字段
	pushver = 0.0
	if request.REQUEST.has_key('pushver'):
		try:pushver = float(request.REQUEST["pushver"])
		except:pass

	try:
		sn = request.REQUEST["SN"]
	except:
		sn = request.META["QUERY_STRING"]
		sn = (sn + "SN=").split("SN=")[1].split("&")[0]
		if sn == "":
			errorLog(request)
			response.write("UNKNOWN Device")
			return None
	try:
		device = getDevice(sn)
		
		#by super 2010-08-26 增加push sdk协议字段,更新协议版本
		if float(device.PushVersion) != pushver:
			device.PushVersion = pushver
			device.save()
		
		if device.DelTag:
			if settings.ICLOCK_AUTO_REG:
				device.DelTag = None
				device.save()
			else:
				return None
		if device.State == DEV_STATUS_PAUSE:
			return None

	except:
		if len(sn) >= 6 and settings.ICLOCK_AUTO_REG and not request.REQUEST.has_key('PIN'): #若SN正确,设置可以自动注册,且没有查询用户信息的话,注册该考勤机
			device = iclock(SN=sn, Alias=request.META["REMOTE_ADDR"],
				LastActivity=datetime.datetime.now(), IPAddress=request.META["REMOTE_ADDR"], DeptID=getDefaultDept())
			
			#by super 2010-08-26 增加push sdk协议字段
			device.PushVersion = pushver
			
			device.save()
			device = iclock.objects.get(SN=sn)
			appendDevCmd(device, "INFO")
			appendDevCmd(device, "CHECK")
		else:
			errorLog(request)
			response.write("UNKNOWN Device: " + sn)
			return None
	return device
Beispiel #5
0
def checkNewsForDev(device, type, param, now, start, mins, LastTime=None):
    for info in messages.objects.filter(StartTime__lt=now):
        if info.EndTime:
            if info.EndTime < now:
                continue
            msg = info.MsgContent
            if type in [M_DEPT_NOTES, M_DEPT_SMS]:
                msg = not device.DeptID_id or device.DeptID_id == info.DeptID_id or ''
        else:
            if LastTime and info.StartTime <= LastTime:
                msg = ''
        if msg:
            appendDevCmd(
                device, 'SMS TAG=0x%X\tUID=1\tMIN=%s\tStartTime=%s\tMSG=%s' %
                (253, mins, start, lcdMsg(msg)))
Beispiel #6
0
def checkDevice(request, response):
    pushver = 0.0
    if request.REQUEST.has_key('pushver'):
        try:
            pushver = float(request.REQUEST['pushver'])
        except:
            pass

    try:
        sn = request.REQUEST['SN']
    except:
        sn = request.META['QUERY_STRING']
        sn = (sn + 'SN=').split('SN=')[1].split('&')[0]
        if sn == '':
            errorLog(request)
            response.write('UNKNOWN Device')
            return
    else:
        try:
            device = getDevice(sn)
            if float(device.PushVersion) != pushver:
                device.PushVersion = pushver
                device.save()
            if device.DelTag:
                if settings.ICLOCK_AUTO_REG:
                    device.DelTag = None
                    device.save()
                else:
                    return
            if device.State == DEV_STATUS_PAUSE:
                return
        except:
            if len(sn) >= 6 and settings.ICLOCK_AUTO_REG and not request.REQUEST.has_key('PIN'):
                device = iclock(SN=sn, Alias=request.META['REMOTE_ADDR'], LastActivity=datetime.datetime.now(),
                                IPAddress=request.META['REMOTE_ADDR'], DeptID=getDefaultDept())
                device.PushVersion = pushver
                device.save()
                device = iclock.objects.get(SN=sn)
                appendDevCmd(device, 'INFO')
                appendDevCmd(device, 'CHECK')
            else:
                errorLog(request)
                response.write('UNKNOWN Device: ' + sn)
                return

    return device
Beispiel #7
0
def checkWeatherForDev(device):
    areaID = device.City
    if not areaID: return None
    datas = getWeather(areaID)
    if datas and (u"NULL\n" not in datas):
        cmd = getWeatherCmd(device, datas)
        if cmd:
            return appendDevCmd(device, cmd)
    return datas
Beispiel #8
0
def checkWeatherForDev(device):
	areaID=device.City
	if not areaID: return None
	datas=getWeather(areaID)
	if datas and (u"NULL\n" not in datas):
		cmd=getWeatherCmd(device, datas)
		if cmd:	
			return appendDevCmd(device, cmd)
	return datas
Beispiel #9
0
def checkUpgradeFW(cmdobj, request):
    appendDevCmd(cmdobj.SN, 'REBOOT')
    if cmdobj.CmdContent.find('PutFile file/fw/') == 0 and cmdobj.CmdContent.find('main.gz') > 0:
        settings.UPDATE_COUNT -= 1
        url, fname = getFW(cmdobj.SN)
        diff = int(cmdobj.CmdReturn) - os.path.getsize(fname)
        if diff in (0, 1):
            if cmdobj.CmdContent.find('main.gz.tmp') > 0:
                appendDevCmd(cmdobj.SN, 'Shell mv main.gz.tmp /mnt/mtdblock/main.gz')
            appendDevCmd(cmdobj.SN, 'REBOOT')
        else:
            appendDevCmd(cmdobj.SN, cmdobj.CmdContent)
Beispiel #10
0
def checkUpgradeFW(cmdobj, request):
	appendDevCmd(cmdobj.SN, "REBOOT")#add by liupan,2011-12-01
	if cmdobj.CmdContent.find("PutFile file/fw/") == 0 and cmdobj.CmdContent.find("main.gz") > 0: #upgrade firmware
		settings.UPDATE_COUNT -= 1
		url, fname = getFW(cmdobj.SN)
		diff = int(cmdobj.CmdReturn) - os.path.getsize(fname) #返回的文件字节数和实际的文件字节数比较
		if diff in [0, 1]: #升级成功, 有一旧版本的固件下载文件后会多出一个字节
#			if cmdobj.SN.OEMVendor !="ZKSoftware Inc.": appendDevCmd(cmdobj.SN, "SET OPTION ~OEMVendor ZKSoftware Inc.")
			if cmdobj.CmdContent.find("main.gz.tmp") > 0:
				appendDevCmd(cmdobj.SN, "Shell mv main.gz.tmp /mnt/mtdblock/main.gz")
#			if hostIsOld(request):
#				appendDevCmd(cmdobj.SN, "SET OPTION WebServerIP 10.33.109.27")
			appendDevCmd(cmdobj.SN, "REBOOT")
		else:
			appendDevCmd(cmdobj.SN, cmdobj.CmdContent) #重新升级
Beispiel #11
0
def cdata(request):
	encrypt = 1
	response = HttpResponse(mimetype='text/plain')
	getResp = ""
	try:
		cursor = conn.cursor()
		resp = ""
		device = checkDevice(request, response)
		if(device == None): return response
		if request.REQUEST.has_key('action'):
			resp += "OK\n"
		elif request.method == 'GET':
			if request.REQUEST.has_key('PIN'):
				save = request.REQUEST.has_key('save') and (request.REQUEST['save'] in ['1', 'Y', 'y', 'yes', 'YES']) or False
				try:
					pin = request.REQUEST['PIN']
					emp = employee.objects.get(PIN=formatPIN(pin))
				except ObjectDoesNotExist:
					resp += "NONE"
				else:
					cc = u"DATA UPDATE USERINFO PIN=%s\tName=%s\tPasswd=%s\tGrp=%d\tCard=%s\tTZ=%s\tPri=%s\n" % (emp.pin(), emp.EName or "", emp.Password or "", emp.AccGroup or 1, getNormalCard(emp.Card), emp.TimeZones or "", save and emp.Privilege or 0)
					for fp in fptemp.objects.filter(UserID=emp):
						try:
							#cc+=u"DATA FP PIN=%s\tFID=%d\tTMP=%s\n"%(emp.pin(), fp.FingerID, fp.temp())
							cc += u"DATA UPDATE FINGERTMP PIN=%s\tFID=%d\tSize=%s\tTMP=%s\n" % (emp.pin(), fp.FingerID, len(fp.temp()), fp.temp()) #by super 2010-07-24
						except:pass
					try:
						resp += cc.encode("gb18030")
					except:
						resp += cc.decode("utf-8").encode("gb18030")
					if not save: # if not saved user in device, delete it after serveral(5) minutes
						endTime = datetime.datetime.now() + datetime.timedelta(0, 5 * 60)
						appendDevCmd(device, "DATA DELETE USERINFO PIN=%s" % emp.pin(), cursor, endTime)
			else:
				#by super 2010-08-25 协议向下兼容
				pushverValue = None
				if request.REQUEST.has_key('pushver'):
					pushverValue = request.REQUEST['pushver']				
				attlogStamp = "Stamp"
				operlogStamp = "OpStamp"
				attphotoStamp = "PhotoStamp"
				TransFlag = "0000000000"
				if pushverValue :#新协议
					attlogStamp = "ATTLOGStamp"
					operlogStamp = "OPERLOGStamp"
					attphotoStamp = "ATTPHOTOStamp"
					#TransFlag = device.UpdateDB.replace("\\t", "\t")						
					TransFlag = "1111000000"
				resp += "GET OPTION FROM: %s\n" % device.SN
				#resp+="Stamp=%s\n"%device.LogStamp
				#resp+="OpStamp=%s\n"%(device.OpLogStamp or 0)
				#resp+="PhotoStamp=%s\n"%(device.PhotoStamp or 0)
#				resp+="ATTLOGStamp=%s\n"%device.LogStamp
#				resp+="OPERLOGStamp=%s\n"%(device.OpLogStamp or 0)
#				resp+="ATTPHOTOStamp=%s\n"%(device.PhotoStamp or 0)
				resp += "%s=%s\n" % (attlogStamp, device.LogStamp)
				resp += "%s=%s\n" % (operlogStamp, device.OpLogStamp or 0)
				resp += "%s=%s\n" % (attphotoStamp, device.PhotoStamp or 0)
				resp += "ErrorDelay=%d\n" % max(30, settings.MIN_REQ_DELAY)
				resp += "Delay=%d\n" % settings.MIN_REQ_DELAY
				resp += "TransTimes=%s\n" % device.TransTimes
				resp += "TransInterval=%d\n" % max(settings.MIN_TRANSINTERVAL, device.TransInterval)
				resp += "TransFlag=%s\n" % device.UpdateDB.replace("\\t", "\t")
				#resp += "TransFlag=%s\n" % TransFlag#device.UpdateDB.replace("\\t","\t") #by super 2010-07-30
				try:
					if not (device.TZAdj == None):
						resp += "TimeZone=%s\n" % device.TZAdj
				except:
					pass 
				resp += "Realtime=%s\n" % settings.TRANS_REALTIME
				resp += "Encrypt=%s\n" % settings.ENCRYPT
				if pushverValue :
					resp += "ServerVer=0.0.2 2010-07-22\n"    #2010-09-17  新版本才有服务版本信息和表明时间戳
					resp += "TableNameStamp\n\n"
				encrypt = 0
			checkAndSave(device)
		elif request.method == 'POST':
			raw_Data = request.raw_post_data
			if settings.ENCRYPT:
				import lzo
				rawData = lzo.bufferDecrypt(raw_Data, device.SN)
			else:
				rawData = raw_Data
			#by super 2010-08-16 将下发的用户信息保存到记事本
			now = datetime.datetime.now()
			filepath = os.path.abspath(os.path.dirname(sys.argv[0]))
			old_file = "%s\\read\\%s_%s" % (tmpDir(), device.SN, now.strftime("%y%m%dT%H%M%S"))    
			#考勤
			if request.REQUEST.has_key('Stamp'): #and request.REQUEST.has_key('table'):
				if request.REQUEST.has_key('table'): #新协议				
					if request.REQUEST['table'] == 'ATTLOG':#by super 2010-07-22 上传考勤记录
						s_data = ":TRANSACTIONS: SN=%s\tIP=%s\tTIME=%s\n%s\n\n" % (device.SN,
								real_ip(request),
								datetime.datetime.now(),
								rawData)
						#写入到队列,后台进程在进行实际的数据库写入操作
						try:
							write_to_file(old_file, s_data.encode("utf-8"))
							#q_server=queqe_server()
							#q_server.lpush("TRANS", s_data)
							#q_server.connection.disconnect()
						except Exception, e:
							appendFile(e)
							resp += u"ERROR:%s\n" % e
							print u"ERROR:%s\n" % e
							raise e
						else:
							device.LogStamp = request.REQUEST['Stamp']
							resp += "OK:%d\n" % 1		
					elif request.REQUEST['table'] == 'OPERLOG':#by super 2010-07-22 上传用户信息和系统日志
						try:
							try:
								rawData.decode("ascii")
							except:
								rawData=rawData.decode("gb18030")
							s_data = u":OPLOG: SN=%s\tIP=%s\tTIME=%s\n%s\n\n" % (device.SN,
									real_ip(request),
									datetime.datetime.now(),
									rawData)
						except Exception, e:
							appendFile("--%s--%s" % (now, e))
							raise e
						#s_data = u":OPLOG: SN=%s\tIP=%s\tTIME=%s\n%s\n\n" % (device.SN,
								#real_ip(request),
								#datetime.datetime.now(),
								#rawData)
						#写入到队列,后台进程在进行实际的数据库写入操作
						try:
							write_to_file(old_file, s_data.encode("utf-8")) 
							print 'success to write file'
							#q_server=queqe_server()
							#q_server.lpush("TRANsS", s_data.encode("utf-8"))
							#q_server.connection.disconnect()
						except Exception, e:
							resp += u"ERROR:%s\n" % e
							appendFile(e)
							errorLog(request)
							raise e
						else:
							device.OpLogStamp = request.REQUEST['Stamp']
							resp += "OK:%d\n" % 1					
					elif request.REQUEST['table'] == 'ATTPHOTO':#by super 2010-07-24 上传照片
						return postPhoto(request)
				else:
Beispiel #12
0
					fldNames.append('TimeZones')
					values.append(tz)
					employee.TimeZones = tz
			except:
				appendFile("ERROR(lineToUser - USER):%s\nITEMS:%s" % (e,"error"))
			cmdStr = "DATA UPDATE USERINFO Name=%s\tPri=%s\tPasswd=%s\tCard=%s\tGrp=%s\tTZ=%s" % (flds["PIN"],
				ename or "", passwd or "", card and ((card != "[0000000000]") and card or "") or "",
				agrp, tz and (tz != "00000000" and tz or "") or "")
			try:
				employee.IsNewEmp
			except Exception, e:
				appendFile("ERROR(lineToUser - USER - insert database):%s\nSQL:%s" % (e, cmdStr))
				employee.IsNewEmp = False
			if employee.IsNewEmp:
				if backDev:
					appendDevCmd(backDev, cmdStr, cursor)
				employee.IsNewEmp = False
				try:
					employee.save()
				except Exception, e:
					appendFile("ERROR(lineToUser - USER - save database)%s:%s\n" % (datetime.time, e))
				sql = ''
			elif len(fldNames) > 2: #有新的用户信息
				sql = u"update userinfo set %s where badgenumber='%s'" % (','.join([u"%s='%s'" % (fldNames[i], values[i]) for i in range(len(fldNames))]), pin)
				if backDev:
					appendDevCmd(backDev, cmdStr, cursor)
			else:
				sql = ''
			if sql:
				cursor.execute(sql)
			return employee
Beispiel #13
0
def dispatchEmpToAll(emp):
    for dev in iclock.objects.all():
        if dev.State != DEV_STATUS_PAUSE and not dev.DelTag:
            s = getEmpCmdStr(emp)
            appendDevCmd(dev, s)
Beispiel #14
0
def deleteEmpFromAll(pin):
    for dev in iclock.objects.all():
        appendDevCmd(dev, 'DATA DELETE USERINFO PIN=%s' % pin)
Beispiel #15
0
def deleteEmpFromAll(pin):
	for dev in iclock.objects.all():
		appendDevCmd(dev, "DATA DELETE USERINFO PIN=%s"%pin)
Beispiel #16
0
def cdata(request):
    encrypt = 1
    response = HttpResponse(mimetype='text/plain')
    getResp = ''
    try:
        cursor = conn.cursor()
        resp = ''
        device = checkDevice(request, response)
        if device == None:
            return response
            if request.REQUEST.has_key('action'):
                resp += 'OK\n'
            if request.method == 'GET':
                if request.REQUEST.has_key('PIN'):
                    save = request.REQUEST.has_key('save') and request.REQUEST['save'] in ('1',
                                                                                           'Y',
                                                                                           'y',
                                                                                           'yes',
                                                                                           'YES') or False
                    try:
                        pin = request.REQUEST['PIN']
                        emp = employee.objects.get(PIN=formatPIN(pin))
                    except ObjectDoesNotExist:
                        resp += 'NONE'
                    else:
                        cc = u'DATA UPDATE USERINFO PIN=%s\tName=%s\tPasswd=%s\tGrp=%d\tCard=%s\tTZ=%s\tPri=%s\n' % (
                            emp.pin(), emp.EName or '', emp.Password or '', emp.AccGroup or 1, getNormalCard(emp.Card),
                            emp.TimeZones or '', save and emp.Privilege or 0)
                        for fp in fptemp.objects.filter(UserID=emp):
                            try:
                                cc += u'DATA UPDATE FINGERTMP PIN=%s\tFID=%d\tSize=%s\tTMP=%s\n' % (
                                    emp.pin(), fp.FingerID, len(fp.temp()), fp.temp())
                            except:
                                pass

                        try:
                            resp += cc.encode('gb18030')
                        except:
                            resp += cc.decode('utf-8').encode('gb18030')
                        else:
                            endTime = save or datetime.datetime.now() + datetime.timedelta(0, 300)
                            appendDevCmd(device, 'DATA DELETE USERINFO PIN=%s' % emp.pin(), cursor, endTime)
            pushverValue = None
            if request.REQUEST.has_key('pushver'):
                pushverValue = request.REQUEST['pushver']
            attlogStamp = 'Stamp'
            operlogStamp = 'OpStamp'
            attphotoStamp = 'PhotoStamp'
            TransFlag = '0000000000'
            if pushverValue:
                attlogStamp = 'ATTLOGStamp'
                operlogStamp = 'OPERLOGStamp'
                attphotoStamp = 'ATTPHOTOStamp'
                TransFlag = '1111000000'
            resp += 'GET OPTION FROM: %s\n' % device.SN
            resp += '%s=%s\n' % (attlogStamp, device.LogStamp)
            resp += '%s=%s\n' % (operlogStamp, device.OpLogStamp or 0)
            resp += '%s=%s\n' % (attphotoStamp, device.PhotoStamp or 0)
            resp += 'ErrorDelay=%d\n' % max(30, settings.MIN_REQ_DELAY)
            resp += 'Delay=%d\n' % settings.MIN_REQ_DELAY
            resp += 'TransTimes=%s\n' % device.TransTimes
            resp += 'TransInterval=%d\n' % max(settings.MIN_TRANSINTERVAL, device.TransInterval)
            resp += 'TransFlag=%s\n' % device.UpdateDB.replace('\\t', '\t')
            try:
                if not device.TZAdj == None:
                    if device.TZAdj == 14:
                        resp += 'TimeZone=0\n'
                    else:
                        resp += 'TimeZone=%s\n' % device.TZAdj
            except:
                pass
            else:
                resp += 'Realtime=%s\n' % settings.TRANS_REALTIME
                resp += 'Encrypt=%s\n' % settings.ENCRYPT
                if pushverValue:
                    resp += 'ServerVer=0.0.2 2010-07-22\n'
                    resp += 'TableNameStamp\n\n'
                encrypt = 0

            checkAndSave(device)
        else:
            if request.method == 'POST':
                raw_Data = request.raw_post_data
                if settings.ENCRYPT:
                    import lzo
                    rawData = lzo.bufferDecrypt(raw_Data, device.SN)
                else:
                    rawData = raw_Data
                now = datetime.datetime.now()
                filepath = os.path.abspath(os.path.dirname(sys.argv[0]))
                old_file = '%s\\read\\%s_%s' % (tmpDir(), device.SN, now.strftime('%y%m%dT%H%M%S'))
                if request.REQUEST.has_key('Stamp') and request.REQUEST.has_key('table'):
                    if request.REQUEST['table'] == 'ATTLOG':
                        s_data = ':TRANSACTIONS: SN=%s\tIP=%s\tTIME=%s\n%s\n\n' % (device.SN,
                                                                                   real_ip(request),
                                                                                   datetime.datetime.now(),
                                                                                   rawData)
                        try:
                            write_to_file(old_file, s_data.encode('utf-8'))
                        except Exception, e:
                            appendFile(e)
                            resp += u'ERROR:%s\n' % e
                            print u'ERROR:%s\n' % e
                            raise e
                        else:
                            device.LogStamp = request.REQUEST['Stamp']
                            resp += 'OK:1\n'
                    elif request.REQUEST['table'] == 'OPERLOG':
                        try:
                            s_data = u':OPLOG: SN=%s\tIP=%s\tTIME=%s\n%s\n\n' % (device.SN,
                                                                                 real_ip(request),
                                                                                 datetime.datetime.now(),
                                                                                 decode_data(rawData))
                        except Exception, e:
                            appendFile('--%s--%s' % (now, e))
                            raise e
                        else:
                            try:
                                write_to_file(old_file, s_data.encode('utf-8'))
                                print 'success to write file'
                            except Exception, e:
                                resp += u'ERROR:%s\n' % e
                                appendFile(e)
                                errorLog(request)
                                raise e
                            else:
                                device.OpLogStamp = request.REQUEST['Stamp']
                                resp += 'OK:1\n'
                    elif request.REQUEST['table'] == 'ATTPHOTO':
                        return postPhoto(request)
Beispiel #17
0
                 employee.TimeZones = tz
         except:
             appendFile('ERROR(lineToUser - USER):%s\nITEMS:%s' % (e, 'error'))
         else:
             cmdStr = 'DATA UPDATE USERINFO Name=%s\tPri=%s\tPasswd=%s\tCard=%s\tGrp=%s\tTZ=%s' % (
                 flds['PIN'],
                 ename or '', passwd or '', card and (card != '[0000000000]' and card or '') or '',
                 agrp, tz and (tz != '00000000' and tz or '') or '')
             try:
                 employee.IsNewEmp
             except Exception, e:
                 appendFile('ERROR(lineToUser - USER - insert database):%s\nSQL:%s' % (e, cmdStr))
                 employee.IsNewEmp = False
             else:
                 if employee.IsNewEmp and backDev:
                     appendDevCmd(backDev, cmdStr, cursor)
                 employee.IsNewEmp = False
                 try:
                     employee.save()
                 except Exception, e:
                     appendFile('ERROR(lineToUser - USER - save database)%s:%s\n' % (datetime.time, e))
                 else:
                     sql = ''
 else:
     if len(fldNames) > 2:
         sql = u"update userinfo set %s where badgenumber='%s'" % (
             (',').join([u"%s='%s'" % (fldNames[i], values[i]) for i in range(len(fldNames))]), pin)
         if backDev:
             appendDevCmd(backDev, cmdStr, cursor)
     else:
         sql = ''
Beispiel #18
0
def dispatchEmpToAll(emp):
	for dev in iclock.objects.all():
		if (dev.State<>DEV_STATUS_PAUSE) and not dev.DelTag:
			s=getEmpCmdStr(emp)
			appendDevCmd(dev, s)