Beispiel #1
0
def cachedPlot(netPlot, plotNumber):
    """XY plot with log Y scale but in this case we send the data for all the
     points to be plotted and then use the update command to plot them all
     quickly."""
    plotConfig0 = PlotConfig()
    plotConfig0.plotName = "Plot 0"
    plotConfig0.xAxisName = "The X axis name"
    plotConfig0.yAxisName = "Log Y axis"
    plotConfig0.enableLines = 1
    plotConfig0.enableShapes = 0
    plotConfig0.enableAutoScale = False
    plotConfig0.minScaleValue = 0
    plotConfig0.maxScaleValue = 1

    netPlot.setPlotType('xy',
                        title="%d: Cached, fast XY chart with log Y scale" %
                        (plotNumber))
    netPlot.addPlot(plotConfig0)

    #These must be called after the plot type is added
    #Enables cached operation, update() will draw all plot points
    netPlot.enableCache(True)
    #Not printing status messages may speed up plotting if CPU bound
    netPlot.enableStatusMessages(False)

    while True:
        netPlot.replot(0)
        for v in range(1, 100):
            netPlot.addXYPlotValues(0, v, random.random())
        #Update. plot values will be sent now as the NetPlot cache is enabled
        netPlot.update()

    return
Beispiel #2
0
def timeExample4(netPlot, plotNumber):
  """Time series chart passing the time (from Netplot.GetTimeNowString()) and the y value"""
  plotConfig = PlotConfig()
  plotConfig.plotName="Plot 0"
  plotConfig.xAxisName="The X axis"
  plotConfig.yAxisName="Y axis (Plot0)"
  plotConfig.enableLines=1
  plotConfig.enableShapes=1
  plotConfig.enableAutoScale=1
  plotConfig.maxAgeSeconds=5
  netPlot.setPlotType('time', title="%d: TIME chart using Netplot.GetTimeNowString()." % (plotNumber) )
  netPlot.addPlot(plotConfig)  
  plotConfig.plotName="Plot 1"
  #Add a new Y Axis
  plotConfig.yAxisName="Y Axis (Plot1)"
  netPlot.addPlot(plotConfig)  
  
  #Update first plot
  i=0
  while i<10:    
    netPlot.addTimePlotValue(0, NetPlot.GetTimeNowString(), float(1.395*random.randint(0,10) ) )
    i=i+1
    time.sleep(0.1)

  netPlot.update()
Beispiel #3
0
def cachedPlot(netPlot, plotNumber):
  """XY plot with log Y scale but in this case we send the data for all the
     points to be plotted and then use the update command to plot them all
     quickly."""
  plotConfig0 = PlotConfig()
  plotConfig0.plotName="Plot 0"
  plotConfig0.xAxisName="The X axis name"
  plotConfig0.yAxisName="Log Y axis"
  plotConfig0.enableLines=1
  plotConfig0.enableShapes=0
  plotConfig0.enableAutoScale=False
  plotConfig0.minScaleValue=0
  plotConfig0.maxScaleValue=1
 
  netPlot.setPlotType('xy', title="%d: Cached, fast XY chart with log Y scale" % (plotNumber) ) 
  netPlot.addPlot(plotConfig0)
  
  #These must be called after the plot type is added
  #Enables cached operation, update() will draw all plot points
  netPlot.enableCache(True)
  #Not printing status messages may speed up plotting if CPU bound
  netPlot.enableStatusMessages(False)
  
  while True:
    netPlot.replot(0)
    for v in range(1,100):
      netPlot.addXYPlotValues(0,v, random.random())
    #Update. plot values will be sent now as the NetPlot cache is enabled
    netPlot.update()  
    
  return  
Beispiel #4
0
def barExample(netPlot, plotNumber):
  """Bar chart example"""
  plotConfig0 = PlotConfig()
  plotConfig0.plotName="Plot 0"
  plotConfig0.xAxisName="The X axis"
  plotConfig0.yAxisName="The Y axis"
  plotConfig0.enableAutoScale=1
  #plotConfig0.minScaleValue=1
  #plotConfig0.maxScaleValue=10000
  #log axis not currently supported on Bar charts    
  netPlot.setPlotType('bar', title="%d: BAR chart" % (plotNumber))
  netPlot.addPlot(plotConfig0)
  i=0
  while i<10:
    netPlot.addPlotValues([random.randint(1000,10000)])
    i=i+1
Beispiel #5
0
def showDialExample(netPlot, plotNumber):

    netPlot.setPlotType('dial', title="%d: Number and MAX" % (plotNumber))

    plotConfig = PlotConfig()
    plotConfig.plotName = "Number"
    plotConfig.minScaleValue = 0
    plotConfig.maxScaleValue = 200
    plotConfig.tickCount = 10

    netPlot.addPlot(plotConfig)
    plotConfig.plotName = "MAX"
    netPlot.addPlot(plotConfig)

    maxV = 0
    value = 0
    while value < 200:
        value = value + random.randint(-10, 20)
        if value > 200:
            value = 200
        elif value < 0:
            value = 0
        if maxV < value:
            maxV = value
        netPlot.addPlotValues([value, maxV])
        time.sleep(0.1)
Beispiel #6
0
def xyExample2(netPlot, plotNumber):
    """XY plot with log Y scale"""
    plotConfig0 = PlotConfig()
    plotConfig0.plotName = "Plot 0"
    plotConfig0.xAxisName = "The X axis name"
    plotConfig0.yAxisName = "Log Y axis"
    plotConfig0.enableLines = 1
    plotConfig0.enableShapes = 1
    plotConfig0.enableLogYAxis = 1
    plotConfig0.minScaleValue = 1E-10
    plotConfig0.maxScaleValue = 1E-2
    netPlot.setPlotType('xy',
                        title="%d: XY chart with log Y scale" % (plotNumber))
    netPlot.addPlot(plotConfig0)
    netPlot.addXYPlotValues(0, -50, 1E-9)
    netPlot.addXYPlotValues(0, -55, 1E-7)
    netPlot.addXYPlotValues(0, -60, 1E-6)
    netPlot.addXYPlotValues(0, -70, 1E-5)
    netPlot.addXYPlotValues(0, -80, 1E-4)
    netPlot.addXYPlotValues(0, -90, 1E-3)
Beispiel #7
0
def timeExample5(netPlot, plotNumber):
  """Time series chart passing the time and the y value"""
  plotConfig = PlotConfig()
  plotConfig.plotName="Plot 0"
  plotConfig.xAxisName="The X axis"
  plotConfig.yAxisName="Y axis (Plot0)"
  plotConfig.enableLines=1
  plotConfig.enableShapes=1
  plotConfig.enableAutoScale=1
  plotConfig.maxAgeSeconds=5
  netPlot.setPlotType('time', title="%d: TIME chart, passing the time and the y value (cached)." % (plotNumber) )
  netPlot.addPlot(plotConfig)  
  plotConfig.plotName="Plot 1"
  #Add a new Y Axis
  plotConfig.yAxisName="Y Axis (Plot1)"
  netPlot.addPlot(plotConfig)  
  #We enable cache on this plot. Therefore 
  #data won't be sent until the netPlot.update() method is called.
  netPlot.enableCache(True)


  t1 = datetime.now()
  
  #Update first plot
  i=0
  while i<10:    
    netPlot.addTimePlotValue(0, t1, float(1.395*random.randint(0,10) ) )
    t1=t1+timedelta(seconds=60*60*24*365)
    i=i+1
                             
  t2 = datetime.now()
  t2=t2+timedelta(seconds=10000)
  #Update second plot
  i=0
  while i<10:    
    netPlot.addTimePlotValue(1, t2, float(1.395*random.randint(0,10) ) )
    t2=t2+timedelta(seconds=60*60*24*365)
    i=i+1
        
  netPlot.update()
Beispiel #8
0
def showDialExample(netPlot, plotNumber):
	
  netPlot.setPlotType('dial', title="%d: Number and MAX" % (plotNumber))

  plotConfig = PlotConfig()
  plotConfig.plotName="Number"
  plotConfig.minScaleValue=0
  plotConfig.maxScaleValue=200
  plotConfig.tickCount=10
   
  netPlot.addPlot(plotConfig)
  plotConfig.plotName="MAX"
  netPlot.addPlot(plotConfig)
   
  maxV=0
  value=0
  while value < 200:
    value=value+random.randint(-10,20)
    if value > 200:
      value=200
    elif value < 0:
      value=0
    if maxV < value:
      maxV=value
    netPlot.addPlotValues([value,maxV])
    time.sleep(0.1)
Beispiel #9
0
def timeExample3(netPlot, plotNumber):
  """Two plots on a time series chart with different Y axis"""
  plotConfig = PlotConfig()
  plotConfig.plotName="Plot 0"
  plotConfig.xAxisName="The X axis"
  plotConfig.yAxisName="Y axis (Plot0)"
  plotConfig.enableLines=1
  plotConfig.enableShapes=1
  plotConfig.enableAutoScale=1
  #plotConfig.minScaleValue=0
  #plotConfig.maxScaleValue=10000
  plotConfig.maxAgeSeconds=5
  netPlot.setPlotType('time', title="%d: TIME chart, two traces with different linear Y scales, both autoscaled" % (plotNumber) )
  netPlot.addPlot(plotConfig)  
  plotConfig.plotName="Plot 1"
  #Add a new Y Axis
  plotConfig.yAxisName="Y Axis (Plot1)"
  netPlot.addPlot(plotConfig)  
  i=0
  while i<10:
    netPlot.addPlotValues([random.randint(1000,10000),random.randint(10,100)])
    i=i+1
Beispiel #10
0
def xyExample2(netPlot, plotNumber):
  """XY plot with log Y scale"""
  plotConfig0 = PlotConfig()
  plotConfig0.plotName="Plot 0"
  plotConfig0.xAxisName="The X axis name"
  plotConfig0.yAxisName="Log Y axis"
  plotConfig0.enableLines=1
  plotConfig0.enableShapes=1
  plotConfig0.enableLogYAxis=1
  plotConfig0.minScaleValue=1E-10
  plotConfig0.maxScaleValue=1E-2
  netPlot.setPlotType('xy', title="%d: XY chart with log Y scale" % (plotNumber) )
  netPlot.addPlot(plotConfig0)
  netPlot.addXYPlotValues(0,-50, 1E-9)
  netPlot.addXYPlotValues(0,-55, 1E-7)
  netPlot.addXYPlotValues(0,-60, 1E-6)
  netPlot.addXYPlotValues(0,-70, 1E-5)
  netPlot.addXYPlotValues(0,-80, 1E-4)
  netPlot.addXYPlotValues(0,-90, 1E-3)
Beispiel #11
0
def barExample(netPlot, plotNumber):
    """Bar chart example"""
    plotConfig0 = PlotConfig()
    plotConfig0.plotName = "Plot 0"
    plotConfig0.xAxisName = "The X axis"
    plotConfig0.yAxisName = "The Y axis"
    plotConfig0.enableAutoScale = 1
    #plotConfig0.minScaleValue=1
    #plotConfig0.maxScaleValue=10000
    #log axis not currently supported on Bar charts
    netPlot.setPlotType('bar', title="%d: BAR chart" % (plotNumber))
    netPlot.addPlot(plotConfig0)
    i = 0
    while i < 10:
        netPlot.addPlotValues([random.randint(1000, 10000)])
        i = i + 1
Beispiel #12
0
def timeExample4(netPlot, plotNumber):
    """Time series chart passing the time (from Netplot.GetTimeNowString()) and the y value"""
    plotConfig = PlotConfig()
    plotConfig.plotName = "Plot 0"
    plotConfig.xAxisName = "The X axis"
    plotConfig.yAxisName = "Y axis (Plot0)"
    plotConfig.enableLines = 1
    plotConfig.enableShapes = 1
    plotConfig.enableAutoScale = 1
    plotConfig.maxAgeSeconds = 5
    netPlot.setPlotType(
        'time',
        title="%d: TIME chart using Netplot.GetTimeNowString()." %
        (plotNumber))
    netPlot.addPlot(plotConfig)
    plotConfig.plotName = "Plot 1"
    #Add a new Y Axis
    plotConfig.yAxisName = "Y Axis (Plot1)"
    netPlot.addPlot(plotConfig)

    #Update first plot
    i = 0
    while i < 10:
        netPlot.addTimePlotValue(0, NetPlot.GetTimeNowString(),
                                 float(1.395 * random.randint(0, 10)))
        i = i + 1
        time.sleep(0.1)

    netPlot.update()
Beispiel #13
0
def timeExample2(netPlot, plotNumber, timePeriod=0.01):
  """Three plots on a time series chart with the same Y axis."""
  plotConfig = PlotConfig()
  plotConfig.xAxisName="The X axis"
  plotConfig.yAxisName="The Y axis (Plot0)"
  plotConfig.enableLines=1
  plotConfig.enableShapes=1
  plotConfig.enableAutoScale=0
  plotConfig.minScaleValue=-5
  plotConfig.maxScaleValue=5
  
  netPlot.setPlotType('time', title="%d: TIME chart, multiple plots, same Y scale" % (plotNumber) )
  #Uncomment this to remove the Legend on the chart
  #netPlot.setChartLegendEnabled(0)
  
  for plotName in ["Sine","Cosine","Tangent"]:
    plotConfig.plotName=plotName
    netPlot.addPlot(plotConfig)
    #We only want one Y axis so null plot axis names
    plotConfig.xAxisName=""
    plotConfig.yAxisName=""
  
  x=0.01
  while x< 25:
    netPlot.addPlotValues([sin(x), cos(x), tan(x)])
    x=x+0.1
    time.sleep(timePeriod)
Beispiel #14
0
def timeExample1(netPlot, plotNumber):
    """Single plot on a time series chart"""
    plotConfig = PlotConfig()
    plotConfig.plotName = "Plot 0"
    plotConfig.xAxisName = "The X axis"
    plotConfig.yAxisName = "The Y axis (Plot0)"
    plotConfig.enableLines = 1
    plotConfig.enableShapes = 1
    plotConfig.enableAutoScale = 0
    plotConfig.minScaleValue = 0
    plotConfig.maxScaleValue = 10000
    plotConfig.maxAgeSeconds = 5
    plotConfig.tickCount = 1000

    netPlot.setPlotType('time',
                        title="%d: TIME chart, single plot" % (plotNumber))
    #Uncomment this to remove the Legend on the chart
    #netPlot.setChartLegendEnabled(0)
    netPlot.addPlot(plotConfig)
    i = 0
    while i < 10:
        netPlot.addPlotValues([random.randint(1000, 10000)])
        i = i + 1
Beispiel #15
0
def xyExample3(netPlot, plotNumber):
  """XY chart with 2 lin and 2 log Y scales"""
  plotConfig0 = PlotConfig()
  plotConfig0.plotName="Plot 0"
  plotConfig0.xAxisName="The X axis name"
  plotConfig0.yAxisName="Log Y axis (Plot 0)"
  plotConfig0.enableLines=1
  plotConfig0.enableShapes=1
  plotConfig0.enableLogYAxis=1
  plotConfig0.minScaleValue=1E-10
  plotConfig0.maxScaleValue=1E-2
  netPlot.setPlotType('xy', title="%d: XY chart with 2 lin and 2 log Y scales" % (plotNumber) )
  netPlot.addPlot(plotConfig0)  
  
  plotConfig1 = PlotConfig()
  plotConfig1.plotName="Plot 1"
  plotConfig1.yAxisName="Y axis (Plot 1)"
  plotConfig1.enableLines=1
  plotConfig1.enableShapes=1
  plotConfig1.enableAutoScale=1
  plotConfig1.enableZeroOnXAxis=0
  plotConfig1.enableZeroOnYAxis=0
  netPlot.addPlot(plotConfig1)

  plotConfig2 = PlotConfig()
  plotConfig2.plotName="Plot 2"
  plotConfig2.yAxisName="Y axis (Plot 2)"
  plotConfig2.enableLines=1
  plotConfig2.enableShapes=1
  plotConfig2.enableAutoScale=1
  plotConfig2.enableZeroOnXAxis=0
  plotConfig2.enableZeroOnYAxis=0
  netPlot.addPlot(plotConfig2)
  

  plotConfig3 = PlotConfig()
  plotConfig3.plotName="Plot 3"
  plotConfig3.yAxisName="Log Y axis (Plot 3)"
  plotConfig3.enableLines=1
  plotConfig3.enableShapes=1
  plotConfig3.enableLogYAxis=1
  plotConfig3.minScaleValue=1E-10
  plotConfig3.maxScaleValue=1E-2
  netPlot.addPlot(plotConfig3)
  
  netPlot.addXYPlotValues(0,-50, 1E-9)
  netPlot.addXYPlotValues(0,-55, 1E-7)
  netPlot.addXYPlotValues(0,-60, 1E-6)
  netPlot.addXYPlotValues(0,-70, 1E-5)
  netPlot.addXYPlotValues(0,-80, 1E-4)
  netPlot.addXYPlotValues(0,-90, 1E-3)
  netPlot.addXYPlotValues(1,-10, 10)
  netPlot.addXYPlotValues(1,-9, 12)
  netPlot.addXYPlotValues(1,-8, 14)
  netPlot.addXYPlotValues(1,-7, 16)
  netPlot.addXYPlotValues(1,-6, 18)
  netPlot.addXYPlotValues(1,-5, 20)
  
  netPlot.addXYPlotValues(2,-35, 10)
  netPlot.addXYPlotValues(2,-95, 12)
  netPlot.addXYPlotValues(2,-85, 14)
  netPlot.addXYPlotValues(2,-75, 16)
  netPlot.addXYPlotValues(2,-65, 18)
  netPlot.addXYPlotValues(2,-55, 20)

  netPlot.addXYPlotValues(3,1, 1E-9)
  netPlot.addXYPlotValues(3,2, 1E-7)
  netPlot.addXYPlotValues(3,3, 1E-6)
  netPlot.addXYPlotValues(3,4, 1E-5)
  netPlot.addXYPlotValues(3,5, 1E-4)
  netPlot.addXYPlotValues(3,6, 1E-3)
Beispiel #16
0
def xyExample1(netPlot, plotNumber):
  """two plots with different linear Y scales"""
  plotConfig0 = PlotConfig()
  plotConfig0.plotName="Plot 0"
  plotConfig0.xAxisName="The X axis name"
  plotConfig0.yAxisName="Y axis (Plot 0)"
  plotConfig0.enableLines=1
  plotConfig0.enableShapes=1
  plotConfig0.enableAutoScale=1
  plotConfig0.enableZeroOnXAxis=0
  plotConfig0.enableZeroOnYAxis=0
  netPlot.setPlotType('xy', title="%d: XY chart, two traces with different linear Y scales, both autoscaled" % (plotNumber) )     
  netPlot.addPlot(plotConfig0)   
  
  plotConfig1 = PlotConfig()
  plotConfig1.plotName="Plot 1"
  plotConfig1.yAxisName="Y axis (Plot 1)"
  plotConfig1.enableLines=1
  plotConfig1.enableShapes=1
  plotConfig1.enableAutoScale=1
  plotConfig1.enableZeroOnXAxis=0
  plotConfig1.enableZeroOnYAxis=0
  netPlot.addPlot(plotConfig1)
  i=0
  while i<10:
    netPlot.addXYPlotValues(0,random.randint(-90,-70), random.randint(130,150))
    netPlot.addXYPlotValues(1,random.randint(-60,-50), random.randint(75,80))
    i=i+1
Beispiel #17
0
def timeExample1(netPlot, plotNumber):
  """Single plot on a time series chart"""
  plotConfig = PlotConfig()
  plotConfig.plotName="Plot 0"
  plotConfig.xAxisName="The X axis"
  plotConfig.yAxisName="The Y axis (Plot0)"
  plotConfig.enableLines=1
  plotConfig.enableShapes=1
  plotConfig.enableAutoScale=0
  plotConfig.minScaleValue=0
  plotConfig.maxScaleValue=10000
  plotConfig.maxAgeSeconds=5  
  plotConfig.tickCount=1000
  
  netPlot.setPlotType('time', title="%d: TIME chart, single plot" % (plotNumber) )
  #Uncomment this to remove the Legend on the chart
  #netPlot.setChartLegendEnabled(0)
  netPlot.addPlot(plotConfig)
  i=0
  while i< 10:
    netPlot.addPlotValues([random.randint(1000,10000)])
    i=i+1
Beispiel #18
0
def timeExample5(netPlot, plotNumber):
    """Time series chart passing the time and the y value"""
    plotConfig = PlotConfig()
    plotConfig.plotName = "Plot 0"
    plotConfig.xAxisName = "The X axis"
    plotConfig.yAxisName = "Y axis (Plot0)"
    plotConfig.enableLines = 1
    plotConfig.enableShapes = 1
    plotConfig.enableAutoScale = 1
    plotConfig.maxAgeSeconds = 5
    netPlot.setPlotType(
        'time',
        title="%d: TIME chart, passing the time and the y value (cached)." %
        (plotNumber))
    netPlot.addPlot(plotConfig)
    plotConfig.plotName = "Plot 1"
    #Add a new Y Axis
    plotConfig.yAxisName = "Y Axis (Plot1)"
    netPlot.addPlot(plotConfig)
    #We enable cache on this plot. Therefore
    #data won't be sent until the netPlot.update() method is called.
    netPlot.enableCache(True)

    t1 = datetime.now()

    #Update first plot
    i = 0
    while i < 10:
        netPlot.addTimePlotValue(0, t1, float(1.395 * random.randint(0, 10)))
        t1 = t1 + timedelta(seconds=60 * 60 * 24 * 365)
        i = i + 1

    t2 = datetime.now()
    t2 = t2 + timedelta(seconds=10000)
    #Update second plot
    i = 0
    while i < 10:
        netPlot.addTimePlotValue(1, t2, float(1.395 * random.randint(0, 10)))
        t2 = t2 + timedelta(seconds=60 * 60 * 24 * 365)
        i = i + 1

    netPlot.update()
Beispiel #19
0
def timeExample3(netPlot, plotNumber):
    """Two plots on a time series chart with different Y axis"""
    plotConfig = PlotConfig()
    plotConfig.plotName = "Plot 0"
    plotConfig.xAxisName = "The X axis"
    plotConfig.yAxisName = "Y axis (Plot0)"
    plotConfig.enableLines = 1
    plotConfig.enableShapes = 1
    plotConfig.enableAutoScale = 1
    #plotConfig.minScaleValue=0
    #plotConfig.maxScaleValue=10000
    plotConfig.maxAgeSeconds = 5
    netPlot.setPlotType(
        'time',
        title=
        "%d: TIME chart, two traces with different linear Y scales, both autoscaled"
        % (plotNumber))
    netPlot.addPlot(plotConfig)
    plotConfig.plotName = "Plot 1"
    #Add a new Y Axis
    plotConfig.yAxisName = "Y Axis (Plot1)"
    netPlot.addPlot(plotConfig)
    i = 0
    while i < 10:
        netPlot.addPlotValues(
            [random.randint(1000, 10000),
             random.randint(10, 100)])
        i = i + 1
Beispiel #20
0
def timeExample2(netPlot, plotNumber, timePeriod=0.01):
    """Three plots on a time series chart with the same Y axis."""
    plotConfig = PlotConfig()
    plotConfig.xAxisName = "The X axis"
    plotConfig.yAxisName = "The Y axis (Plot0)"
    plotConfig.enableLines = 1
    plotConfig.enableShapes = 1
    plotConfig.enableAutoScale = 0
    plotConfig.minScaleValue = -5
    plotConfig.maxScaleValue = 5

    netPlot.setPlotType('time',
                        title="%d: TIME chart, multiple plots, same Y scale" %
                        (plotNumber))
    #Uncomment this to remove the Legend on the chart
    #netPlot.setChartLegendEnabled(0)

    for plotName in ["Sine", "Cosine", "Tangent"]:
        plotConfig.plotName = plotName
        netPlot.addPlot(plotConfig)
        #We only want one Y axis so null plot axis names
        plotConfig.xAxisName = ""
        plotConfig.yAxisName = ""

    x = 0.01
    while x < 25:
        netPlot.addPlotValues([sin(x), cos(x), tan(x)])
        x = x + 0.1
        time.sleep(timePeriod)
Beispiel #21
0
def xyExample1(netPlot, plotNumber):
    """two plots with different linear Y scales"""
    plotConfig0 = PlotConfig()
    plotConfig0.plotName = "Plot 0"
    plotConfig0.xAxisName = "The X axis name"
    plotConfig0.yAxisName = "Y axis (Plot 0)"
    plotConfig0.enableLines = 1
    plotConfig0.enableShapes = 1
    plotConfig0.enableAutoScale = 1
    plotConfig0.enableZeroOnXAxis = 0
    plotConfig0.enableZeroOnYAxis = 0
    netPlot.setPlotType(
        'xy',
        title=
        "%d: XY chart, two traces with different linear Y scales, both autoscaled"
        % (plotNumber))
    netPlot.addPlot(plotConfig0)

    plotConfig1 = PlotConfig()
    plotConfig1.plotName = "Plot 1"
    plotConfig1.yAxisName = "Y axis (Plot 1)"
    plotConfig1.enableLines = 1
    plotConfig1.enableShapes = 1
    plotConfig1.enableAutoScale = 1
    plotConfig1.enableZeroOnXAxis = 0
    plotConfig1.enableZeroOnYAxis = 0
    netPlot.addPlot(plotConfig1)
    i = 0
    while i < 10:
        netPlot.addXYPlotValues(0, random.randint(-90, -70),
                                random.randint(130, 150))
        netPlot.addXYPlotValues(1, random.randint(-60, -50),
                                random.randint(75, 80))
        i = i + 1
Beispiel #22
0
def xyExample3(netPlot, plotNumber):
    """XY chart with 2 lin and 2 log Y scales"""
    plotConfig0 = PlotConfig()
    plotConfig0.plotName = "Plot 0"
    plotConfig0.xAxisName = "The X axis name"
    plotConfig0.yAxisName = "Log Y axis (Plot 0)"
    plotConfig0.enableLines = 1
    plotConfig0.enableShapes = 1
    plotConfig0.enableLogYAxis = 1
    plotConfig0.minScaleValue = 1E-10
    plotConfig0.maxScaleValue = 1E-2
    netPlot.setPlotType('xy',
                        title="%d: XY chart with 2 lin and 2 log Y scales" %
                        (plotNumber))
    netPlot.addPlot(plotConfig0)

    plotConfig1 = PlotConfig()
    plotConfig1.plotName = "Plot 1"
    plotConfig1.yAxisName = "Y axis (Plot 1)"
    plotConfig1.enableLines = 1
    plotConfig1.enableShapes = 1
    plotConfig1.enableAutoScale = 1
    plotConfig1.enableZeroOnXAxis = 0
    plotConfig1.enableZeroOnYAxis = 0
    netPlot.addPlot(plotConfig1)

    plotConfig2 = PlotConfig()
    plotConfig2.plotName = "Plot 2"
    plotConfig2.yAxisName = "Y axis (Plot 2)"
    plotConfig2.enableLines = 1
    plotConfig2.enableShapes = 1
    plotConfig2.enableAutoScale = 1
    plotConfig2.enableZeroOnXAxis = 0
    plotConfig2.enableZeroOnYAxis = 0
    netPlot.addPlot(plotConfig2)

    plotConfig3 = PlotConfig()
    plotConfig3.plotName = "Plot 3"
    plotConfig3.yAxisName = "Log Y axis (Plot 3)"
    plotConfig3.enableLines = 1
    plotConfig3.enableShapes = 1
    plotConfig3.enableLogYAxis = 1
    plotConfig3.minScaleValue = 1E-10
    plotConfig3.maxScaleValue = 1E-2
    netPlot.addPlot(plotConfig3)

    netPlot.addXYPlotValues(0, -50, 1E-9)
    netPlot.addXYPlotValues(0, -55, 1E-7)
    netPlot.addXYPlotValues(0, -60, 1E-6)
    netPlot.addXYPlotValues(0, -70, 1E-5)
    netPlot.addXYPlotValues(0, -80, 1E-4)
    netPlot.addXYPlotValues(0, -90, 1E-3)
    netPlot.addXYPlotValues(1, -10, 10)
    netPlot.addXYPlotValues(1, -9, 12)
    netPlot.addXYPlotValues(1, -8, 14)
    netPlot.addXYPlotValues(1, -7, 16)
    netPlot.addXYPlotValues(1, -6, 18)
    netPlot.addXYPlotValues(1, -5, 20)

    netPlot.addXYPlotValues(2, -35, 10)
    netPlot.addXYPlotValues(2, -95, 12)
    netPlot.addXYPlotValues(2, -85, 14)
    netPlot.addXYPlotValues(2, -75, 16)
    netPlot.addXYPlotValues(2, -65, 18)
    netPlot.addXYPlotValues(2, -55, 20)

    netPlot.addXYPlotValues(3, 1, 1E-9)
    netPlot.addXYPlotValues(3, 2, 1E-7)
    netPlot.addXYPlotValues(3, 3, 1E-6)
    netPlot.addXYPlotValues(3, 4, 1E-5)
    netPlot.addXYPlotValues(3, 5, 1E-4)
    netPlot.addXYPlotValues(3, 6, 1E-3)