def decrypt_dtc_code(code):
"""Returns the 5-digit DTC code from hex encoding"""
dtc = []
current = code
for i in range(0,3):
if len(current)<4:
raise "Tried to decode bad DTC: %s" % code
tc = obd_sensors.hex_to_int(current[0]) #typecode
tc = tc >> 2
if tc == 0:
type = "P"
elif tc == 1:
type = "C"
elif tc == 2:
type = "B"
elif tc == 3:
type = "U"
else:
raise tc
dig1 = str(obd_sensors.hex_to_int(current[0]) & 3)
dig2 = str(obd_sensors.hex_to_int(current[1]))
dig3 = str(obd_sensors.hex_to_int(current[2]))
dig4 = str(obd_sensors.hex_to_int(current[3]))
dtc.append(type+dig1+dig2+dig3+dig4)
current = current[4:]
return dtc
def decrypt_dtc_code(code):
"""Returns the 5-digit DTC code from hex encoding"""
dtc = []
current = code
# for i in range(0,3):
if len(current) < 4:
return "NODATA"
# raise Exception("Tried to decode bad DTC: %s" % code)
# typecode is first half of first word of first byte - so need to bit shift to right by 2
tc = obd_sensors.hex_to_int(current[0]) #typecode
tc = tc >> 2
if tc == 0:
type = "P"
elif tc == 1:
type = "C"
elif tc == 2:
type = "B"
elif tc == 3:
type = "U"
else:
raise tc
# digit 1 is the 2nd half of first word of first byte - grab only the last 2 bits by doing "& 0011"
dig1 = str(obd_sensors.hex_to_int(current[0]) & 3)
dig2 = str(obd_sensors.hex_to_int(current[1]))
dig3 = str(obd_sensors.hex_to_int(current[2]))
dig4 = str(obd_sensors.hex_to_int(current[3]))
dtc.append(type + dig1 + dig2 + dig3 + dig4)
dtc = ','.join(dtc)
print "DTC from get_dtc(): " + dtc
current = current[4:]
return dtc
def decrypt_dtc_code(code):
"""Returns the 5-digit DTC code from hex encoding"""
dtc = []
current = code
for i in range(0,3):
if len(current)<4:
raise "Tried to decode bad DTC: %s" % code
tc = obd_sensors.hex_to_int(current[0]) #typecode
tc = tc >> 2
if tc == 0:
type = "P"
elif tc == 1:
type = "C"
elif tc == 2:
type = "B"
elif tc == 3:
type = "U"
else:
raise tc
dig1 = str(obd_sensors.hex_to_int(current[0]) & 3)
dig2 = str(obd_sensors.hex_to_int(current[1]))
dig3 = str(obd_sensors.hex_to_int(current[2]))
dig4 = str(obd_sensors.hex_to_int(current[3]))
dtc.append(type+dig1+dig2+dig3+dig4)
current = current[4:]
return dtc
def get_dtc_f(self):
"""Returns a list of all pending DTC codes. Each element consists of
a 2-tuple: (DTC code (string), Code description (string) )"""
dtcLetters = ["P", "C", "B", "U"]
r = self.sensor(1)[1] #data
dtcNumber = r[0]
mil = r[1]
DTCCodes = []
#read mode 7
self.send_command(GET_FREEZE_DTC_COMMAND)
res = self.get_result()
if res[:7] == "NODATA": #no freeze frame
return DTCCodes
print "DTC freeze result:" + res
for i in range(0, 3):
val1 = hex_to_int(res[3 + i * 6:5 + i * 6])
val2 = hex_to_int(
res[6 + i * 6:8 +
i * 6]) #get DTC codes from response (3 DTC each 2 bytes)
val = (val1 << 8) + val2 #DTC val as int
if val == 0: #skip fill of last packet
break
DTCStr = dtcLetters[(val & 0xC000) > 14] + str(
(val & 0x3000) >> 12) + str((val & 0x0f00) >> 8) + str(
(val & 0x00f0) >> 4) + str(val & 0x000f)
DTCCodes.append(["Passive", DTCStr])
return DTCCodes
def get_dtc(self):
"""Returns a list of all pending DTC codes. Each element consists of
a 2-tuple: (DTC code (string), Code description (string) )"""
dtcLetters = ["P", "C", "B", "U"]
r = self.sensor(1)[1] #data
dtcNumber = r[0]
mil = r[1]
DTCCodes = []
print "Number of stored DTC:" + str(dtcNumber) + " MIL: " + str(mil)
# get all DTC, 3 per mesg response
for i in range(0, ((dtcNumber + 2) / 3)):
self.send_command(GET_DTC_COMMAND)
res = self.get_result()
print "DTC result:" + res
for i in range(0, 3):
val1 = hex_to_int(res[3 + i * 6:5 + i * 6])
val2 = hex_to_int(
res[6 + i * 6:8 + i *
6]) #get DTC codes from response (3 DTC each 2 bytes)
val = (val1 << 8) + val2 #DTC val as int
if val == 0: #skip fill of last packet
break
DTCStr = dtcLetters[(val & 0xC000) > 14] + str(
(val & 0x3000) >> 12) + str((val & 0x0f00) >> 8) + str(
(val & 0x00f0) >> 4) + str(val & 0x000f)
DTCCodes.append(["Active", DTCStr])
return DTCCodes
def decrypt_dtc_code(code):
"""Returns the 5-digit DTC code from hex encoding"""
dtc = ""
print "decrypt_dtc_code_code " + code
#if len(code)<4:
# os.popen('dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteInfoprint string:"ERROR: Tried to decode bad DTC"')
# raise "Tried to decode bad DTC: %s" % code
tc = obd_sensors.hex_to_int(code[0]) #typecode
tc = tc >> 2
if tc == 0:
type = "P"
elif tc == 1:
type = "C"
elif tc == 2:
type = "B"
elif tc == 3:
type = "U"
else:
os.popen('dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteInfoprint string:"ERROR!"')
raise tc
dig1 = str(obd_sensors.hex_to_int(code[0]) & 3)
dig2 = str(obd_sensors.hex_to_int(code[1]))
dig3 = str(obd_sensors.hex_to_int(code[2]))
dig4 = str(obd_sensors.hex_to_int(code[3]))
dtc = type+dig1+dig2+dig3+dig4
return dtc
def get_dtc(self):
"""Returns a list of all pending DTC codes. Each element consists of
a 2-tuple: (DTC code (string), Code description (string) )"""
dtcLetters = ["P", "C", "B", "U"]
r = self.sensor(1)[1] # data
dtcNumber = r[0]
mil = r[1]
DTCCodes = []
print "Number of stored DTC:" + str(dtcNumber) + " MIL: " + str(mil)
# get all DTC, 3 per mesg response
for i in range(0, ((dtcNumber + 2) / 3)):
self.send_command(GET_DTC_COMMAND)
res = self.get_result()
print "DTC result:" + res
for i in range(0, 3):
val1 = hex_to_int(res[3 + i * 6 : 5 + i * 6])
val2 = hex_to_int(res[6 + i * 6 : 8 + i * 6]) # get DTC codes from response (3 DTC each 2 bytes)
val = (val1 << 8) + val2 # DTC val as int
if val == 0: # skip fill of last packet
break
DTCStr = (
dtcLetters[(val & 0xC000) > 14]
+ str((val & 0x3000) >> 12)
+ str((val & 0x0F00) >> 8)
+ str((val & 0x00F0) >> 4)
+ str(val & 0x000F)
)
DTCCodes.append(["Active", DTCStr])
# read mode 7
self.send_command(GET_FREEZE_DTC_COMMAND)
res = self.get_result()
if res[:7] == "NO DATA": # no freeze frame
return DTCCodes
print "DTC freeze result:" + res
for i in range(0, 3):
val1 = hex_to_int(res[3 + i * 6 : 5 + i * 6])
val2 = hex_to_int(res[6 + i * 6 : 8 + i * 6]) # get DTC codes from response (3 DTC each 2 bytes)
val = (val1 << 8) + val2 # DTC val as int
if val == 0: # skip fill of last packet
break
DTCStr = (
dtcLetters[(val & 0xC000) > 14]
+ str((val & 0x3000) >> 12)
+ str((val & 0x0F00) >> 8)
+ str((val & 0x00F0) >> 4)
+ str(val & 0x000F)
)
DTCCodes.append(["Passive", DTCStr])
return DTCCodes
def get_obd_data_bytes(self):
"""Internal use only: not a public interface"""
retVal = {}
byteCount = {}
data = self.get_result()
if data is None:
return None
for line in data:
line = line.split(' ') #Turn data into list of bytes
if not self.prot_is_CAN:
line = line[2:]
ecu = line[0]
if ecu not in retVal:
retVal[ecu] = []
if self.prot_is_CAN:
if line[1][0] == '0': #PCI Byte indicates single line response
byteCount[ecu] = int(
line[1][1]) #Second half of PCI byte is data length
line = line[2:] #Remove ecu address and byte count
retVal[ecu] += line[0:byteCount[ecu]] #Get the data
if line[1][
0] == '1': #PCI Byte indicates 1st frame of multiframe response
byteCount[ecu] = hex_to_int(line[1][1]) << 8 + hex_to_int(
line[2]) #PCI Byte extended 1 byte for byte count
retVal[ecu] += ['00'] * (byteCount[ecu] - len(retVal[ecu])
) #Fill out data with zeroes
retVal[ecu] = retVal[ecu][
0:byteCount[ecu]] #Truncate list to byte count
line = line[3:] #Remove ECU Address and Byte Count
i = 0
for data in line:
retVal[ecu][i] = data
i += 1
if line[1][
0] == '2': #PCI Byte indicates Next frame of multiframe response
i = hex_to_int(
line[1][1]) #Indicates frame # of multiframe response
i = i * 7 - 1
line = line[2:]
if ecu not in byteCount:
retVal[ecu] += ['00'] * (i + 7 - len(
retVal[ecu])) #Next Frame came before 1st frame.
#Fill through this frame with zeroes.
for data in line:
if i < len(retVal[ecu]):
retVal[ecu][i] = data
else:
break
i += 1
else:
retVal[ecu] += line[1:]
return retVal
def parse_get_dtc_data(res, DTCCodes, DTCType, dtcNumber=None):
dtcLetters = ["P", "C", "B", "U"]
for ecu in res:
i = 0
dataList = res[ecu]
if ecu not in DTCCodes:
DTCCodes[ecu] = []
while i < len(dataList):
#check Mode Response byte (Should be GET_DTC_RESPONSE(0x43))
if (self.prot_is_CAN and i == 0) or (not self.prot_is_CAN
and (i % 7) == 0):
if dataList[i] != GET_DTC_RESPONSE and dataList[
i] != GET_PENDING_DTC_RESPONSE:
self._notify_window.DebugEvent.emit(
1, 'Unexpected Response to GET_DTC (%s)' %
(dataList[i]))
break
i += 1
#For CAN, 1st byte is Number of DTCs
if self.prot_is_CAN and i == 1:
NumCodes = hex_to_int(dataList[i])
i += 1
if dtcNumber is not None and (NumCodes !=
dtcNumber[ecu]):
self._notify_window.DebugEvent.emit(
1,
'Expected Codes (%d) != Received Codes (%d)' %
(dtcNumber[ecu], NumCodes))
if i >= len(dataList):
break
val1 = hex_to_int(dataList[i])
val2 = hex_to_int(dataList[
i +
1]) #get DTC codes from response (3 DTC each 2 bytes)
val = (val1 << 8) + val2 #DTC val as int
i += 2
if val == 0: #skip fill of last packet
continue
DTCStr = dtcLetters[(val & 0xC000) >> 14] + str(
(val & 0x3000) >> 12) + str(val & 0x0fff)
DTCCodes[ecu].append([DTCType, DTCStr])
return DTCCodes
def decrypt_dtc_code(code, nrOfDTC):
"""Returns the 5-digit DTC code from hex encoding"""
dtc = []
current = code
type = ""
newRow = 0
if nrOfDTC != "NODATA":
for i in range(0,nrOfDTC):
if len(current)<4:
print( "Tried to decode bad DTC: " + str(code))
tc = obd_sensors.hex_to_int(current[0]) #typecode
tc = tc >> 2
if tc == 0:
type = "P"
elif tc == 1:
type = "C"
elif tc == 2:
type = "B"
elif tc == 3:
type = "U"
else:
print("raise tc")
dig1 = str(obd_sensors.hex_to_int(current[0]) & 3)
dig2 = str(obd_sensors.hex_to_int(current[1]))
dig3 = str(obd_sensors.hex_to_int(current[2]))
dig4 = str(obd_sensors.hex_to_int(current[3]))
dtc.append(type+dig1+dig2+dig3+dig4)
newRow+=1
if newRow < 3:
current = current[4:]
else:
current = current[6:]
newRow=0
return dtc
def get_dtc(self):
print "get_dtc"
"""Returns a list of all pending DTC codes. Each element consists of
a 2-tuple: (DTC code (string), Code description (string) )"""
dtcLetters = ["P", "C", "B", "U"]
r = self.sensor(1)[1] #data
dtcNumber = r[0]
mil = r[1]
DTCCodes = []
print "Number of stored DTC:" + str(dtcNumber) + " MIL: " + str(mil)
# get all DTC, 3 per mesg response
for i in range(0, ((dtcNumber+2)/3)):
self.send_command(GET_DTC_COMMAND)
res = self.get_result()
print "DTC result:" + res
for i in range(0, 3):
DTC_raw = res[3+i*6:5+i*6] + res[6+i*6:8+i*6]
if DTC_raw=="0000": #skip fill of last packet
break
DTCStr = decrypt_dtc_code(DTC_raw)
DTCCodes.append(["Active",DTCStr])
#read mode 7
self.send_command(GET_FREEZE_DTC_COMMAND)
res = self.get_result()
if res[:7] == "NO DATA": #no freeze frame
return DTCCodes
print "DTC freeze result:" + res
a=len(res)
print "len(res): " + str(a)
if a>9:
for i in range(0, 3):
DTC_raw = res[3+i*6:5+i*6] + res[6+i*6:8+i*6]
if DTC_raw=="0000": #skip fill of last packet
break
DTCStr = decrypt_dtc_code(DTC_raw)
#M se restituisce codici a 6 cifre invece che ha 5
if len(DTCStr)>5:
DTCStr = DTCStr[0]+DTCStr[2:]
print "DTCStr "+DTCStr
DTCCodes.append(["Passive",DTCStr])
else:
for i in range(0, 3):
val1 = hex_to_int(res[3+i*6:5+i*6])
val2 = hex_to_int(res[6+i*6:8+i*6]) #get DTC codes from response (3 DTC each 2 bytes)
val = (val1<<8)+val2 #DTC val as int
if val==0: #skip fill of last packet
break
DTCStr=dtcLetters[(val&0xC000)>14]+str((val&0x3000)>>12)+str(val&0x0fff)
#M se restituisce codici a 6 cifre invece che ha 5
if len(DTCStr)>5:
DTCStr = DTCStr[0]+DTCStr[2:]
print "DTCStr "+DTCStr
DTCCodes.append(["Passive",DTCStr])
return DTCCodes
def get_dtc(self):
"""Returns a list of all pending DTC codes. Each element consists of
a 2-tuple: (DTC code (string), Code description (string) )"""
outfile = open('captured.dtc.codes', 'a')
outfile.write('--------------\n')
dtcLetters = ["P", "C", "B", "U"]
r = self.sensor(1)[1] #data
if r == "NODATA":
outfile.close()
return []
print('r=' + str(r))
outfile.write('Sensor: ' + str(r) + '\n')
dtcNumber = r[0]
mil = r[1]
DTCCodes = []
print("Number of stored DTC:" + str(dtcNumber) + " MIL: " + str(mil))
outfile.write("Number of stored DTC:" + str(dtcNumber) + " MIL: " +
str(mil) + '\n')
# get all DTC, 3 per mesg response
for i in range(0, ((int(dtcNumber) + 2) / 3)):
self.send_command(GET_DTC_COMMAND)
res = self.get_result()
# print "DTC result=" + res
outfile.write("DTC result=" + res + '\n')
outfile.flush()
ressegment = res[4:]
for i in range(0, 3):
val1 = hex_to_int(ressegment[3 + i * 6:5 + i * 6])
outfile.write('val1=' + str(val1) + '\n')
val2 = hex_to_int(
ressegment[6 + i * 6:8 + i * 6]
) #get DTC codes from response (3 DTC each 2 bytes)
outfile.write('val2=' + str(val2) + '\n')
val = (val1 << 8) + val2 #DTC val as int
outfile.write('val=' + str(val) + '\n')
if val == 0: #skip fill of last packet
break
DTCStr = dtcLetters[(val & 0xC000) >> 14] + str(
(val & 0x3000) >> 12) + str((val & 0x0f00) >> 8) + str(
(val & 0x00f0) >> 4) + str(val & 0x000f)
outfile.write('DTCStr=' + DTCStr + '\n')
DTCCodes.append(["Active", DTCStr])
#read mode 7
self.send_command(GET_FREEZE_DTC_COMMAND)
res = self.get_result()
outfile.write("Read Mode 7:" + str(res) + '\n')
outfile.flush()
if res[:7] == "NO DATA": #no freeze frame
outfile.close()
return DTCCodes
# print "DTC freeze result=" + res
outfile.write("DTC freeze result=" + res + '\n')
ressegment = res[4:]
for i in range(0, 3):
val1 = hex_to_int(ressegment[3 + i * 6:5 + i * 6])
outfile.write('val1=' + str(val1) + '\n')
val2 = hex_to_int(
ressegment[6 + i * 6:8 + i * 6]
) #get DTC codes from response (3 DTC each 2 bytes)
outfile.write('val2=' + str(val2) + '\n')
val = (val1 << 8) + val2 #DTC val as int
outfile.write('val=' + str(val) + '\n')
if val == 0: #skip fill of last packet
break
DTCStr = dtcLetters[(val & 0xC000) >> 14] + str(
(val & 0x3000) >> 12) + str((val & 0x0f00) >> 8) + str(
(val & 0x00f0) >> 4) + str(val & 0x000f)
outfile.write('DTCStr=' + DTCStr + '\n')
DTCCodes.append(["Passive", DTCStr])
# outfile.write('Intermediate DTCCodes=' + str(DTCCodes) + '\n')
outfile.write('DTCCodes=' + str(DTCCodes) + '\n')
outfile.close()
return DTCCodes