def load_screen_settings(self):
"""
Loads the screen size and the monitor number from the settings.
"""
# Add the screen settings to the settings dict. This has to be done here due to cyclic dependency.
# Do not do this anywhere else.
screen_settings = {
'core/x position': self.current['size'].x(),
'core/y position': self.current['size'].y(),
'core/monitor': self.display_count - 1,
'core/height': self.current['size'].height(),
'core/width': self.current['size'].width()
}
Settings.extend_default_settings(screen_settings)
settings = Settings()
settings.beginGroup('core')
monitor = settings.value('monitor')
self.set_current_display(monitor)
self.display = settings.value('display on monitor')
override_display = settings.value('override position')
x = settings.value('x position')
y = settings.value('y position')
width = settings.value('width')
height = settings.value('height')
self.override['size'] = QtCore.QRect(x, y, width, height)
self.override['primary'] = False
settings.endGroup()
if override_display:
self.set_override_display()
else:
self.reset_current_display()
def settings_override_with_group_test(self):
"""
Test the Settings creation and its override usage - with groups
"""
# GIVEN: an override for the settings
screen_settings = {
'test/extend': 'very wide',
}
Settings.extend_default_settings(screen_settings)
# WHEN reading a setting for the first time
settings = Settings()
settings.beginGroup('test')
extend = settings.value('extend')
# THEN the default value is returned
self.assertEqual('very wide', extend,
'The default value defined should be returned')
# WHEN a new value is saved into config
Settings().setValue('test/extend', 'very short')
# THEN the new value is returned when re-read
self.assertEqual('very short',
Settings().value('test/extend'),
'The saved value should be returned')
def extend_default_settings_test(self):
"""
Test that the extend_default_settings method extends the default settings
"""
# GIVEN: A patched __default_settings__ dictionary
with patch.dict(Settings.__default_settings__, {
'test/setting 1': 1,
'test/setting 2': 2,
'test/setting 3': 3
}, True):
# WHEN: Calling extend_default_settings
Settings.extend_default_settings({
'test/setting 3': 4,
'test/extended 1': 1,
'test/extended 2': 2
})
# THEN: The _default_settings__ dictionary_ should have the new keys
self.assertEqual(
Settings.__default_settings__, {
'test/setting 1': 1,
'test/setting 2': 2,
'test/setting 3': 4,
'test/extended 1': 1,
'test/extended 2': 2
})
def test_add_action_different_context(self):
"""
ActionList test - Tests the add_action method. The actions have the different parent, the same shortcuts and
both have the QtCore.Qt.WidgetShortcut shortcut context set.
"""
# GIVEN: Two actions with the same shortcuts.
parent = QtCore.QObject()
action3 = QtGui.QAction(parent)
action3.setObjectName('action3')
action3.setShortcutContext(QtCore.Qt.WidgetShortcut)
second_parent = QtCore.QObject()
action_with_same_shortcuts3 = QtGui.QAction(second_parent)
action_with_same_shortcuts3.setObjectName('action_with_same_shortcuts3')
action_with_same_shortcuts3.setShortcutContext(QtCore.Qt.WidgetShortcut)
# Add default shortcuts to Settings class.
default_shortcuts = {
'shortcuts/action3': [QtGui.QKeySequence('e'), QtGui.QKeySequence('f')],
'shortcuts/action_with_same_shortcuts3': [QtGui.QKeySequence('e'), QtGui.QKeySequence('f')]
}
Settings.extend_default_settings(default_shortcuts)
# WHEN: Add the two actions to the action list.
self.action_list.add_action(action3, 'example_category2')
self.action_list.add_action(action_with_same_shortcuts3, 'example_category2')
# Remove the actions again.
self.action_list.remove_action(action3, 'example_category2')
self.action_list.remove_action(action_with_same_shortcuts3, 'example_category2')
# THEN: Both action should keep their shortcuts.
assert len(action3.shortcuts()) == 2, 'The action should have two shortcut assigned.'
assert len(action_with_same_shortcuts3.shortcuts()) == 2, 'The action should have two shortcuts assigned.'
def load_screen_settings(self):
"""
Loads the screen size and the monitor number from the settings.
"""
# Add the screen settings to the settings dict. This has to be done here due to cyclic dependency.
# Do not do this anywhere else.
screen_settings = {
'core/x position': self.current['size'].x(),
'core/y position': self.current['size'].y(),
'core/monitor': self.display_count - 1,
'core/height': self.current['size'].height(),
'core/width': self.current['size'].width()
}
Settings.extend_default_settings(screen_settings)
settings = Settings()
settings.beginGroup('core')
monitor = settings.value('monitor')
self.set_current_display(monitor)
self.display = settings.value('display on monitor')
override_display = settings.value('override position')
x = settings.value('x position')
y = settings.value('y position')
width = settings.value('width')
height = settings.value('height')
self.override['size'] = QtCore.QRect(x, y, width, height)
self.override['primary'] = False
settings.endGroup()
if override_display:
self.set_override_display()
else:
self.reset_current_display()
def test_add_action_different_parent(self):
"""
ActionList test - Tests the add_action method. The actions have the different parent, the same shortcuts and
both have the QtCore.Qt.WindowShortcut shortcut context set.
"""
# GIVEN: Two actions with the same shortcuts.
parent = QtCore.QObject()
action2 = QtGui.QAction(parent)
action2.setObjectName('action2')
second_parent = QtCore.QObject()
action_with_same_shortcuts2 = QtGui.QAction(second_parent)
action_with_same_shortcuts2.setObjectName('action_with_same_shortcuts2')
# Add default shortcuts to Settings class.
default_shortcuts = {
'shortcuts/action2': [QtGui.QKeySequence('c'), QtGui.QKeySequence('d')],
'shortcuts/action_with_same_shortcuts2': [QtGui.QKeySequence('d'), QtGui.QKeySequence('c')]
}
Settings.extend_default_settings(default_shortcuts)
# WHEN: Add the two actions to the action list.
self.action_list.add_action(action2, 'example_category')
self.action_list.add_action(action_with_same_shortcuts2, 'example_category')
# Remove the actions again.
self.action_list.remove_action(action2, 'example_category')
self.action_list.remove_action(action_with_same_shortcuts2, 'example_category')
# THEN: As both actions have the same shortcuts, they should be removed from one action.
assert len(action2.shortcuts()) == 2, 'The action should have two shortcut assigned.'
assert len(action_with_same_shortcuts2.shortcuts()) == 0, 'The action should not have a shortcut assigned.'
def test_add_action_different_context(self):
"""
ActionList test - Tests the add_action method. The actions have the different parent, the same shortcuts and
both have the QtCore.Qt.WidgetShortcut shortcut context set.
"""
# GIVEN: Two actions with the same shortcuts.
parent = QtCore.QObject()
action3 = QtWidgets.QAction(parent)
action3.setObjectName('action3')
action3.setShortcutContext(QtCore.Qt.WidgetShortcut)
second_parent = QtCore.QObject()
action_with_same_shortcuts3 = QtWidgets.QAction(second_parent)
action_with_same_shortcuts3.setObjectName('action_with_same_shortcuts3')
action_with_same_shortcuts3.setShortcutContext(QtCore.Qt.WidgetShortcut)
# Add default shortcuts to Settings class.
default_shortcuts = {
'shortcuts/action3': [QtGui.QKeySequence(QtCore.Qt.Key_E), QtGui.QKeySequence(QtCore.Qt.Key_F)],
'shortcuts/action_with_same_shortcuts3': [QtGui.QKeySequence(QtCore.Qt.Key_E),
QtGui.QKeySequence(QtCore.Qt.Key_F)]
}
Settings.extend_default_settings(default_shortcuts)
# WHEN: Add the two actions to the action list.
self.action_list.add_action(action3, 'example_category2')
self.action_list.add_action(action_with_same_shortcuts3, 'example_category2')
# Remove the actions again.
self.action_list.remove_action(action3, 'example_category2')
self.action_list.remove_action(action_with_same_shortcuts3, 'example_category2')
# THEN: Both action should keep their shortcuts.
assert len(action3.shortcuts()) == 2, 'The action should have two shortcut assigned.'
assert len(action_with_same_shortcuts3.shortcuts()) == 2, 'The action should have two shortcuts assigned.'
def test_add_action_different_parent(self):
"""
ActionList test - Tests the add_action method. The actions have the different parent, the same shortcuts and
both have the QtCore.Qt.WindowShortcut shortcut context set.
"""
# GIVEN: Two actions with the same shortcuts.
parent = QtCore.QObject()
action2 = QtWidgets.QAction(parent)
action2.setObjectName('action2')
second_parent = QtCore.QObject()
action_with_same_shortcuts2 = QtWidgets.QAction(second_parent)
action_with_same_shortcuts2.setObjectName('action_with_same_shortcuts2')
# Add default shortcuts to Settings class.
default_shortcuts = {
'shortcuts/action2': [QtGui.QKeySequence(QtCore.Qt.Key_C), QtGui.QKeySequence(QtCore.Qt.Key_D)],
'shortcuts/action_with_same_shortcuts2': [QtGui.QKeySequence(QtCore.Qt.Key_D),
QtGui.QKeySequence(QtCore.Qt.Key_C)]
}
Settings.extend_default_settings(default_shortcuts)
# WHEN: Add the two actions to the action list.
self.action_list.add_action(action2, 'example_category')
self.action_list.add_action(action_with_same_shortcuts2, 'example_category')
# Remove the actions again.
self.action_list.remove_action(action2, 'example_category')
self.action_list.remove_action(action_with_same_shortcuts2, 'example_category')
# THEN: As both actions have the same shortcuts, they should be removed from one action.
assert len(action2.shortcuts()) == 2, 'The action should have two shortcut assigned.'
assert len(action_with_same_shortcuts2.shortcuts()) == 0, 'The action should not have a shortcut assigned.'
def __init__(self,
name,
default_settings,
media_item_class=None,
settings_tab_class=None,
version=None):
"""
This is the constructor for the plugin object. This provides an easy way for descendant plugins to populate
common data. This method *must*
be overridden, like so::
class MyPlugin(Plugin):
def __init__(self):
super(MyPlugin, self).__init__('MyPlugin', version='0.1')
:param name: Defaults to *None*. The name of the plugin.
:param default_settings: A dict containing the plugin's settings. The value to each key is the default value
to be used.
:param media_item_class: The class name of the plugin's media item.
:param settings_tab_class: The class name of the plugin's settings tab.
:param version: Defaults to *None*, which means that the same version number is used as OpenLP's version number.
"""
log.debug('Plugin %s initialised' % name)
super(Plugin, self).__init__()
self.name = name
self.text_strings = {}
self.set_plugin_text_strings()
self.name_strings = self.text_strings[StringContent.Name]
if version:
self.version = version
else:
self.version = get_application_version()['version']
self.settings_section = self.name
self.icon = None
self.media_item_class = media_item_class
self.settings_tab_class = settings_tab_class
self.settings_tab = None
self.media_item = None
self.weight = 0
self.status = PluginStatus.Inactive
# Add the default status to the default settings.
default_settings[name + '/status'] = PluginStatus.Inactive
default_settings[name + '/last directory'] = ''
# Append a setting for files in the mediamanager (note not all plugins
# which have a mediamanager need this).
if media_item_class is not None:
default_settings['%s/%s files' % (name, name)] = []
# Add settings to the dict of all settings.
Settings.extend_default_settings(default_settings)
Registry().register_function('%s_add_service_item' % self.name,
self.process_add_service_event)
Registry().register_function('%s_config_updated' % self.name,
self.config_update)
def extend_default_settings_test(self):
"""
Test that the extend_default_settings method extends the default settings
"""
# GIVEN: A patched __default_settings__ dictionary
with patch.dict(Settings.__default_settings__,
{'test/setting 1': 1, 'test/setting 2': 2, 'test/setting 3': 3}, True):
# WHEN: Calling extend_default_settings
Settings.extend_default_settings({'test/setting 3': 4, 'test/extended 1': 1, 'test/extended 2': 2})
# THEN: The _default_settings__ dictionary_ should have the new keys
self.assertEqual(
Settings.__default_settings__, {'test/setting 1': 1, 'test/setting 2': 2, 'test/setting 3': 4,
'test/extended 1': 1, 'test/extended 2': 2})
def __init__(self, name, default_settings, media_item_class=None, settings_tab_class=None, version=None):
"""
This is the constructor for the plugin object. This provides an easy way for descendant plugins to populate
common data. This method *must*
be overridden, like so::
class MyPlugin(Plugin):
def __init__(self):
super(MyPlugin, self).__init__('MyPlugin', version='0.1')
:param name: Defaults to *None*. The name of the plugin.
:param default_settings: A dict containing the plugin's settings. The value to each key is the default value
to be used.
:param media_item_class: The class name of the plugin's media item.
:param settings_tab_class: The class name of the plugin's settings tab.
:param version: Defaults to *None*, which means that the same version number is used as OpenLP's version number.
"""
log.debug('Plugin %s initialised' % name)
super(Plugin, self).__init__()
self.name = name
self.text_strings = {}
self.set_plugin_text_strings()
self.name_strings = self.text_strings[StringContent.Name]
if version:
self.version = version
else:
self.version = get_application_version()['version']
self.settings_section = self.name
self.icon = None
self.media_item_class = media_item_class
self.settings_tab_class = settings_tab_class
self.settings_tab = None
self.media_item = None
self.weight = 0
self.status = PluginStatus.Inactive
# Add the default status to the default settings.
default_settings[name + '/status'] = PluginStatus.Inactive
default_settings[name + '/last directory'] = ''
# Append a setting for files in the mediamanager (note not all plugins
# which have a mediamanager need this).
if media_item_class is not None:
default_settings['%s/%s files' % (name, name)] = []
# Add settings to the dict of all settings.
Settings.extend_default_settings(default_settings)
Registry().register_function('%s_add_service_item' % self.name, self.process_add_service_event)
Registry().register_function('%s_config_updated' % self.name, self.config_update)
def settings_override_with_group_test(self):
"""
Test the Settings creation and its override usage - with groups
"""
# GIVEN: an override for the settings
screen_settings = {
'test/extend': 'very wide',
}
Settings.extend_default_settings(screen_settings)
# WHEN reading a setting for the first time
settings = Settings()
settings.beginGroup('test')
extend = settings.value('extend')
# THEN the default value is returned
self.assertEqual('very wide', extend, 'The default value defined should be returned')
# WHEN a new value is saved into config
Settings().setValue('test/extend', 'very short')
# THEN the new value is returned when re-read
self.assertEqual('very short', Settings().value('test/extend'), 'The saved value should be returned')
