def test_regression_bug_fix_issue_2062_sql_meta_file_running_parallel(self):
from openmdao.test_suite.components.paraboloid import Paraboloid
prob = om.Problem()
prob.model.add_subsystem('comp', Paraboloid(), promotes=['x', 'y', 'f_xy'])
prob.model.add_design_var('x', lower=0.0, upper=1.0)
prob.model.add_design_var('y', lower=0.0, upper=1.0)
prob.model.add_objective('f_xy')
prob.driver = om.DOEDriver(om.FullFactorialGenerator(levels=3))
prob.driver.options['run_parallel'] = True
prob.driver.options['procs_per_model'] = 1
prob.driver.add_recorder(om.SqliteRecorder("cases.sql"))
prob.setup()
prob.run_driver()
prob.cleanup()
# Run this again. Because of the bug fix for issue 2062, this code should NOT
# throw an exception
prob = om.Problem()
prob.model.add_subsystem('comp', Paraboloid(), promotes=['x', 'y', 'f_xy'])
prob.model.add_design_var('x', lower=0.0, upper=1.0)
prob.model.add_design_var('y', lower=0.0, upper=1.0)
prob.model.add_objective('f_xy')
prob.driver = om.DOEDriver(om.FullFactorialGenerator(levels=3))
prob.driver.options['run_parallel'] = True
prob.driver.options['procs_per_model'] = 1
prob.driver.add_recorder(om.SqliteRecorder("cases.sql"))
prob.setup()
if prob.comm.rank == 0:
expected_warnings = [
(UserWarning,
'The existing case recorder metadata file, cases.sql_meta, '
'is being overwritten.'),
(UserWarning,
'The existing case recorder file, cases.sql_0, is being '
'overwritten.'),
]
else:
expected_warnings = [
(UserWarning,
'The existing case recorder file, cases.sql_1, is being '
'overwritten.'),
]
with assert_warnings(expected_warnings):
prob.run_driver()
prob.cleanup()
def test_sql_meta_file_exists(self):
# Check that an existing sql_meta file will be deleted/overwritten
# if it already exists before a run. (see Issue #2062)
prob = om.Problem()
prob.model.add_subsystem('comp', Paraboloid(), promotes=['x', 'y', 'f_xy'])
prob.model.add_design_var('x', lower=0.0, upper=1.0)
prob.model.add_design_var('y', lower=0.0, upper=1.0)
prob.model.add_objective('f_xy')
prob.driver = om.DOEDriver(om.FullFactorialGenerator(levels=3))
prob.driver.options['run_parallel'] = True
prob.driver.options['procs_per_model'] = 1
prob.driver.add_recorder(om.SqliteRecorder("cases.sql"))
prob.setup()
prob.run_driver()
prob.cleanup()
# Run this again. It should NOT throw an exception.
prob = om.Problem()
prob.model.add_subsystem('comp', Paraboloid(), promotes=['x', 'y', 'f_xy'])
prob.model.add_design_var('x', lower=0.0, upper=1.0)
prob.model.add_design_var('y', lower=0.0, upper=1.0)
prob.model.add_objective('f_xy')
prob.driver = om.DOEDriver(om.FullFactorialGenerator(levels=3))
prob.driver.options['run_parallel'] = True
prob.driver.options['procs_per_model'] = 1
prob.driver.add_recorder(om.SqliteRecorder("cases.sql"))
prob.setup()
if prob.comm.rank == 0:
expected_warnings = [
(UserWarning,
'The existing case recorder metadata file, cases.sql_meta, '
'is being overwritten.'),
(UserWarning,
'The existing case recorder file, cases.sql_0, is being '
'overwritten.'),
]
else:
expected_warnings = [
(UserWarning,
'The existing case recorder file, cases.sql_1, is being '
'overwritten.'),
]
with assert_warnings(expected_warnings):
prob.run_driver()
prob.cleanup()
def driver_setup(prob):
"""Change settings of the driver
Here the type of the driver has to be selected, wether it will be an
optimisation driver or a DoE driver. In both cases there are multiple
options to choose from to tune the driver.
Two recorders are then attached to the driver for results and N2 plotting.
Args:
prob (om.Problem object) : Instance of the Problem class that is used
to define the current routine.
"""
if Rt.type == 'Optim':
# TBD : Genetic algorithm
# if len(Rt.objective) > 1 and False:
# log.info("""More than 1 objective function, the driver will
# automatically be set to NSGA2""")
# prob.driver = om.pyOptSparseDriver() # multifunc driver : NSGA2
# prob.driver.options['optimizer'] = 'NSGA2'
# prob.driver.opt_settings['PopSize'] = 7
# prob.driver.opt_settings['maxGen'] = Rt.max_iter
# else:
prob.driver = om.ScipyOptimizeDriver()
prob.driver.options['optimizer'] = Rt.driver
prob.driver.options['maxiter'] = Rt.max_iter
prob.driver.options['tol'] = Rt.tol
prob.driver.options['disp'] = True
elif Rt.type == 'DoE':
if Rt.doedriver == 'Uniform':
driver_type = om.UniformGenerator(num_samples=Rt.samplesnb)
elif Rt.doedriver == 'LatinHypercube':
driver_type = om.LatinHypercubeGenerator(samples=Rt.samplesnb)
elif Rt.doedriver == 'FullFactorial':
driver_type = om.FullFactorialGenerator(levels=Rt.samplesnb)
elif Rt.doedriver == 'CSVGenerated':
file = opf.gen_doe_csv(Rt.user_config)
driver_type = om.CSVGenerator(file)
prob.driver = om.DOEDriver(driver_type)
prob.driver.options['run_parallel'] = True
prob.driver.options['procs_per_model'] = 1
else:
log.error('Type of optimisation not recognize!!!')
## Attaching a recorder and a diagramm visualizer ##
prob.driver.recording_options['record_inputs'] = True
prob.driver.add_recorder(
om.SqliteRecorder(optim_dir_path + '/circuit.sqlite'))
prob.driver.add_recorder(
om.SqliteRecorder(optim_dir_path + '/Driver_recorder.sql'))
def run_sequential():
# problem will run in the single proc comm for this rank
prob = om.Problem(comm=my_comm)
prob.model.add_subsystem('comp', Paraboloid(), promotes=['x', 'y', 'f_xy'])
prob.model.add_design_var('x', lower=0.0, upper=1.0)
prob.model.add_design_var('y', lower=0.0, upper=1.0)
prob.model.add_objective('f_xy')
prob.driver = om.DOEDriver(om.FullFactorialGenerator(levels=3))
prob.driver.options['run_parallel'] = False
prob.driver.options['procs_per_model'] = 1
prob.driver.add_recorder(om.SqliteRecorder("cases.sql"))
prob.setup()
prob.run_driver()
prob.cleanup()
def setUp(self):
# override notebook flag for system, variable table and sqlite_reader
from openmdao.core import system
from openmdao.utils import variable_table
from openmdao.recorders import sqlite_reader
system.notebook = variable_table.notebook = sqlite_reader.notebook = True
# capture HTML output from variable_table
self.html_stream = StringIO()
variable_table.HTML = lambda x: self.html_stream.write(x)
sqlite_reader.HTML = lambda x: self.html_stream.write(x)
# create & run problem, generate cases
model = om.Group()
model.add_subsystem('comp', Paraboloid(), promotes=['x', 'y', 'f_xy'])
model.add_design_var('x', lower=0.0, upper=1.0)
model.add_design_var('y', lower=0.0, upper=1.0)
model.add_objective('f_xy')
prob = om.Problem(model)
prob.driver = om.DOEDriver(om.FullFactorialGenerator(levels=3))
prob.driver.add_recorder(
om.SqliteRecorder('cases.sql', record_viewer_data=False))
prob.setup()
prob.run_driver()
prob.cleanup()
# expected results
self.expected_sources = ['driver']
self.expected_cases = [
'rank0:DOEDriver_FullFactorial|0',
'rank0:DOEDriver_FullFactorial|1',
'rank0:DOEDriver_FullFactorial|2',
'rank0:DOEDriver_FullFactorial|3',
'rank0:DOEDriver_FullFactorial|4',
'rank0:DOEDriver_FullFactorial|5',
'rank0:DOEDriver_FullFactorial|6',
'rank0:DOEDriver_FullFactorial|7',
'rank0:DOEDriver_FullFactorial|8'
]
def set_driver(self, wt_opt):
folder_output = self.opt["general"]["folder_output"]
if self.opt["driver"]["optimization"]["flag"]:
step_size = self._get_step_size()
# Solver has specific meaning in OpenMDAO
wt_opt.model.approx_totals(method="fd", step=step_size, form=self.opt["driver"]["optimization"]["form"])
# Set optimization solver and options. First, Scipy's SLSQP
if self.opt["driver"]["optimization"]["solver"] == "SLSQP":
wt_opt.driver = om.ScipyOptimizeDriver()
wt_opt.driver.options["optimizer"] = self.opt["driver"]["optimization"]["solver"]
wt_opt.driver.options["tol"] = self.opt["driver"]["optimization"]["tol"]
wt_opt.driver.options["maxiter"] = self.opt["driver"]["optimization"]["max_iter"]
# The next two optimization methods require pyOptSparse.
elif self.opt["driver"]["optimization"]["solver"] == "CONMIN":
try:
from openmdao.api import pyOptSparseDriver
except:
raise ImportError(
"You requested the optimization solver CONMIN, but you have not installed the pyOptSparseDriver. Please do so and rerun."
)
wt_opt.driver = pyOptSparseDriver()
wt_opt.driver.options["optimizer"] = self.opt["driver"]["optimization"]["solver"]
wt_opt.driver.opt_settings["ITMAX"] = self.opt["driver"]["optimization"]["max_iter"]
elif self.opt["driver"]["optimization"]["solver"] == "SNOPT":
try:
from openmdao.api import pyOptSparseDriver
except:
raise ImportError(
"You requested the optimization solver SNOPT, but you have not installed the pyOptSparseDriver. Please do so and rerun."
)
wt_opt.driver = pyOptSparseDriver()
try:
wt_opt.driver.options["optimizer"] = self.opt["driver"]["optimization"]["solver"]
except:
raise ImportError(
"You requested the optimization solver SNOPT, but you have not installed it within the pyOptSparseDriver. Please do so and rerun."
)
wt_opt.driver.opt_settings["Major optimality tolerance"] = float(
self.opt["driver"]["optimization"]["tol"]
)
wt_opt.driver.opt_settings["Major iterations limit"] = int(
self.opt["driver"]["optimization"]["max_major_iter"]
)
wt_opt.driver.opt_settings["Iterations limit"] = int(
self.opt["driver"]["optimization"]["max_minor_iter"]
)
wt_opt.driver.opt_settings["Major feasibility tolerance"] = float(
self.opt["driver"]["optimization"]["tol"]
)
wt_opt.driver.opt_settings["Summary file"] = os.path.join(folder_output, "SNOPT_Summary_file.txt")
wt_opt.driver.opt_settings["Print file"] = os.path.join(folder_output, "SNOPT_Print_file.txt")
if "hist_file_name" in self.opt["driver"]["optimization"]:
wt_opt.driver.hist_file = self.opt["driver"]["optimization"]["hist_file_name"]
if "verify_level" in self.opt["driver"]["optimization"]:
wt_opt.driver.opt_settings["Verify level"] = self.opt["driver"]["optimization"]["verify_level"]
else:
wt_opt.driver.opt_settings["Verify level"] = -1
# wt_opt.driver.declare_coloring()
if "hotstart_file" in self.opt["driver"]["optimization"]:
wt_opt.driver.hotstart_file = self.opt["driver"]["optimization"]["hotstart_file"]
else:
raise ValueError(
"The optimizer " + self.opt["driver"]["optimization"]["solver"] + "is not yet supported!"
)
elif self.opt["driver"]["design_of_experiments"]["flag"]:
if self.opt["driver"]["design_of_experiments"]["generator"].lower() == "uniform":
generator = om.UniformGenerator(
num_samples=self.opt["driver"]["design_of_experiments"]["num_samples"],
seed=self.opt["driver"]["design_of_experiments"]["seed"],
)
elif self.opt["driver"]["design_of_experiments"]["generator"].lower() == "fullfact":
generator = om.FullFactorialGenerator(levels=self.opt["driver"]["design_of_experiments"]["num_samples"])
elif self.opt["driver"]["design_of_experiments"]["generator"].lower() == "plackettburman":
generator = om.PlackettBurmanGenerator()
elif self.opt["driver"]["design_of_experiments"]["generator"].lower() == "boxbehnken":
generator = om.BoxBehnkenGenerator()
elif self.opt["driver"]["design_of_experiments"]["generator"].lower() == "latinhypercube":
generator = om.LatinHypercubeGenerator(
samples=self.opt["driver"]["design_of_experiments"]["num_samples"],
criterion=self.opt["driver"]["design_of_experiments"]["criterion"],
seed=self.opt["driver"]["design_of_experiments"]["seed"],
)
else:
raise Exception(
"The generator type {} is unsupported.".format(
self.opt["driver"]["design_of_experiments"]["generator"]
)
)
# Initialize driver
wt_opt.driver = om.DOEDriver(generator)
# options
wt_opt.driver.options["run_parallel"] = self.opt["driver"]["design_of_experiments"]["run_parallel"]
else:
raise Exception(
"Design variables are set to be optimized or studied, but no driver is selected. Please enable a driver."
)
return wt_opt
# Constraint: CN_β > 0.0
model.add_constraint('ecrm_150.CN_beta', lower=0.0)
# Constraint: CL < 1.3
model.add_constraint('ecrm_150.CL', upper=1.3)
# Constraint: CL = W/qS
model.add_constraint('ecrm_150.L_equals_W', equals=0.0)
# Design Variables
model.add_design_var('wing_cord', lower=45.0, upper=75.0)
#model.add_design_var('vert_tail_area', lower=1500.0, upper=3000.0)
#model.add_design_var('horiz_tail_area', lower=4500, upper=7500)
model.add_design_var('ecrm_150.alpha', lower=2.0, upper=14.0)
prob.driver = om.DOEDriver(om.FullFactorialGenerator(levels=4))
prob.driver.options['debug_print'] = ['desvars', 'nl_cons', 'objs']
prob.driver.add_recorder(om.SqliteRecorder("cases.sql"))
prob.driver.recording_options['record_desvars'] = True
prob.driver.recording_options['record_objectives'] = True
prob.driver.recording_options['record_constraints'] = True
prob.driver.recording_options['record_derivatives'] = False
prob.setup()
# Set Initial Conditions
prob.set_val('beta', 0.0, units='deg')
prob.set_val('re', 1.0e6, units='1/m')
prob.set_val('rho', 1.225, units='kg/m**3')
#prob.set_val('rho', 0.625, units='kg/m**3')
prob.set_val('CT', grav_constant * 17.e-6, units='1/s')
def run_routine():
"""
Run optimisation with openmdao.
Function 'run_routine' is used to define the optimisation problem for
openmdao. The different parameter to define variables are passed through a
global dictionnay (for now).
Source:
*http://openmdao.org/twodocs/versions/latest/getting_started/index.html
"""
# sInitialize dictionnaries
# init_dict()
# Build the model
prob = om.Problem()
model = prob.model
# Build model components
indeps = model.add_subsystem('indeps', om.IndepVarComp())
model.add_subsystem('objective', objective_function())
model.add_subsystem('const', constraint())
# Choose between optimizer or driver
if Rt.type == 'DoE':
if Rt.doetype == 'uniform':
driver = prob.driver = om.DOEDriver(
om.UniformGenerator(num_samples=Rt.samplesnb))
elif Rt.doetype == 'fullfact':
# 2->9 3->81
driver = prob.driver = om.DOEDriver(
om.FullFactorialGenerator(Rt.samplesnb))
elif Rt.type == 'Optim':
driver = prob.driver = om.ScipyOptimizeDriver()
# SLSQP,COBYLA,shgo,TNC
driver.options['optimizer'] = Rt.driver
# driver.options['maxiter'] = 20
driver.options['tol'] = 1e-2
if Rt.driver == 'COBYLA':
driver.opt_settings['catol'] = 0.06
# Connect problem components to model components
# Design variable
for key, (name, listval, minval, maxval, setcommand,
getcommand) in design_var_dict.items():
norm = int(np.log10(abs(listval[0]) + 1) + 1)
indeps.add_output(key, listval[0], ref=norm, ref0=0)
model.connect('indeps.' + key, 'objective.' + key)
model.add_design_var('indeps.' + key, lower=minval, upper=maxval)
# Constraints
for key, (name, listval, minval, maxval,
getcommand) in res_var_dict.items():
# Select only one constrain
if name in Rt.constraints:
norm = int(np.log10(abs(listval[0]) + 1) + 1)
model.add_constraint('const.' + name,
ref=norm,
lower=-0.25,
upper=0.25)
# Objective function
model.add_objective('objective.{}'.format(Rt.objective))
# Recorder
path = optim_dir_path
driver.add_recorder(om.SqliteRecorder(path + '/Driver_recorder.sql'))
# Run
prob.setup()
prob.run_driver()
prob.cleanup()
# Results
log.info('=========================================')
log.info('min = ' + str(prob['objective.{}'.format(Rt.objective)]))
for key, (name, listval, minval, maxval, setcommand,
getcommand) in design_var_dict.items():
log.info(name + ' = ' + str(prob['indeps.' + key]) + '\n Min :' +
str(minval) + ' Max : ' + str(maxval))
log.info('Variable history')
for key, (name, listval, minval, maxval, setcommand,
getcommand) in design_var_dict.items():
log.info(name + ' => ' + str(listval))
log.info('=========================================')
# Generate plots, maybe make a dynamic plot
opf.read_results(optim_dir_path, Rt.type)
