class OqParam(valid.ParamSet):
siteparam = dict(
vs30measured='reference_vs30_type',
vs30='reference_vs30_value',
z1pt0='reference_depth_to_1pt0km_per_sec',
z2pt5='reference_depth_to_2pt5km_per_sec',
backarc='reference_backarc',
)
area_source_discretization = valid.Param(
valid.NoneOr(valid.positivefloat), None)
asset_correlation = valid.Param(valid.NoneOr(valid.FloatRange(0, 1)), 0)
asset_life_expectancy = valid.Param(valid.positivefloat)
asset_loss_table = valid.Param(valid.boolean, False)
avg_losses = valid.Param(valid.boolean, False)
base_path = valid.Param(valid.utf8, '.')
calculation_mode = valid.Param(valid.Choice(*CALCULATORS), '')
coordinate_bin_width = valid.Param(valid.positivefloat)
compare_with_classical = valid.Param(valid.boolean, False)
concurrent_tasks = valid.Param(
valid.positiveint, parallel.executor.num_tasks_hint)
conditional_loss_poes = valid.Param(valid.probabilities, [])
continuous_fragility_discretization = valid.Param(valid.positiveint, 20)
description = valid.Param(valid.utf8_not_empty)
distance_bin_width = valid.Param(valid.positivefloat)
mag_bin_width = valid.Param(valid.positivefloat)
export_dir = valid.Param(valid.utf8, None)
export_multi_curves = valid.Param(valid.boolean, False)
exports = valid.Param(valid.export_formats, ())
filter_sources = valid.Param(valid.boolean, True)
ground_motion_correlation_model = valid.Param(
valid.NoneOr(valid.Choice(*GROUND_MOTION_CORRELATION_MODELS)), None)
ground_motion_correlation_params = valid.Param(valid.dictionary)
ground_motion_fields = valid.Param(valid.boolean, False)
gsim = valid.Param(valid.gsim, None)
hazard_calculation_id = valid.Param(valid.NoneOr(valid.positiveint), None)
hazard_curves_from_gmfs = valid.Param(valid.boolean, False)
hazard_output_id = valid.Param(valid.NoneOr(valid.positiveint))
hazard_maps = valid.Param(valid.boolean, False)
hypocenter = valid.Param(valid.point3d)
ignore_missing_costs = valid.Param(valid.namelist, [])
individual_curves = valid.Param(valid.boolean, True)
inputs = valid.Param(dict, {})
insured_losses = valid.Param(valid.boolean, False)
intensity_measure_types = valid.Param(valid.intensity_measure_types, None)
intensity_measure_types_and_levels = valid.Param(
valid.intensity_measure_types_and_levels, None)
interest_rate = valid.Param(valid.positivefloat)
investigation_time = valid.Param(valid.positivefloat, None)
loss_curve_resolution = valid.Param(valid.positiveint, 50)
loss_ratios = valid.Param(valid.loss_ratios, ())
lrem_steps_per_interval = valid.Param(valid.positiveint, 0)
steps_per_interval = valid.Param(valid.positiveint, 1)
master_seed = valid.Param(valid.positiveint, 0)
maximum_distance = valid.Param(valid.floatdict) # km
asset_hazard_distance = valid.Param(valid.positivefloat, 5) # km
maximum_tile_weight = valid.Param(valid.positivefloat)
mean_hazard_curves = valid.Param(valid.boolean, False)
minimum_intensity = valid.Param(valid.floatdict, {}) # IMT -> minIML
number_of_ground_motion_fields = valid.Param(valid.positiveint)
number_of_logic_tree_samples = valid.Param(valid.positiveint, 0)
num_epsilon_bins = valid.Param(valid.positiveint)
poes = valid.Param(valid.probabilities)
poes_disagg = valid.Param(valid.probabilities, [])
quantile_hazard_curves = valid.Param(valid.probabilities, [])
quantile_loss_curves = valid.Param(valid.probabilities, [])
random_seed = valid.Param(valid.positiveint, 42)
reference_depth_to_1pt0km_per_sec = valid.Param(
valid.positivefloat, numpy.nan)
reference_depth_to_2pt5km_per_sec = valid.Param(
valid.positivefloat, numpy.nan)
reference_vs30_type = valid.Param(
valid.Choice('measured', 'inferred'), 'measured')
reference_vs30_value = valid.Param(
valid.positivefloat, numpy.nan)
reference_backarc = valid.Param(valid.boolean, False)
region = valid.Param(valid.coordinates, None)
region_constraint = valid.Param(valid.wkt_polygon, None)
region_grid_spacing = valid.Param(valid.positivefloat, None)
risk_imtls = valid.Param(valid.intensity_measure_types_and_levels, {})
risk_investigation_time = valid.Param(valid.positivefloat, None)
rupture_mesh_spacing = valid.Param(valid.positivefloat, None)
complex_fault_mesh_spacing = valid.Param(
valid.NoneOr(valid.positivefloat), None)
ses_per_logic_tree_path = valid.Param(valid.positiveint, 1)
sites = valid.Param(valid.NoneOr(valid.coordinates), None)
sites_disagg = valid.Param(valid.NoneOr(valid.coordinates), [])
sites_per_tile = valid.Param(valid.positiveint, 1000)
specific_assets = valid.Param(valid.namelist, [])
taxonomies_from_model = valid.Param(valid.boolean, False)
time_event = valid.Param(str, None)
truncation_level = valid.Param(valid.NoneOr(valid.positivefloat), None)
uniform_hazard_spectra = valid.Param(valid.boolean, False)
width_of_mfd_bin = valid.Param(valid.positivefloat, None)
@property
def risk_files(self):
try:
return self._risk_files
except AttributeError:
self._file_type, self._risk_files = get_risk_files(self.inputs)
return self._risk_files
@property
def file_type(self):
try:
return self._file_type
except AttributeError:
self._file_type, self._risk_files = get_risk_files(self.inputs)
return self._file_type
def __init__(self, **names_vals):
super(OqParam, self).__init__(**names_vals)
self.risk_investigation_time = (
self.risk_investigation_time or self.investigation_time)
if ('intensity_measure_types_and_levels' in names_vals and
'intensity_measure_types' in names_vals):
logging.warn('Ignoring intensity_measure_types since '
'intensity_measure_types_and_levels is set')
if 'intensity_measure_types_and_levels' in names_vals:
self.hazard_imtls = self.intensity_measure_types_and_levels
delattr(self, 'intensity_measure_types_and_levels')
elif 'intensity_measure_types' in names_vals:
self.hazard_imtls = dict.fromkeys(self.intensity_measure_types)
delattr(self, 'intensity_measure_types')
self._file_type, self._risk_files = get_risk_files(self.inputs)
# check the IMTs vs the GSIMs
if 'gsim_logic_tree' in self.inputs:
if self.gsim:
raise ValueError('If `gsim_logic_tree_file` is set, there '
'must be no `gsim` key')
path = os.path.join(
self.base_path, self.inputs['gsim_logic_tree'])
self._gsims_by_trt = logictree.GsimLogicTree(path, []).values
for gsims in self._gsims_by_trt.values():
self.check_gsims(gsims)
elif self.gsim is not None:
self.check_gsims([self.gsim])
def check_gsims(self, gsims):
"""
:param gsims: a sequence of GSIM instances
"""
imts = set('SA' if imt.startswith('SA') else imt for imt in self.imtls)
for gsim in gsims:
restrict_imts = gsim.DEFINED_FOR_INTENSITY_MEASURE_TYPES
if restrict_imts:
names = set(cls.__name__ for cls in restrict_imts)
invalid_imts = ', '.join(imts - names)
if invalid_imts:
raise ValueError(
'The IMT %s is not accepted by the GSIM %s' %
(invalid_imts, gsim))
if 'site_model' not in self.inputs:
# look at the required sites parameters: they must have
# a valid value; the other parameters can keep a NaN
# value since they are not used by the calculator
for param in gsim.REQUIRES_SITES_PARAMETERS:
if param in ('lons', 'lats'): # no check
continue
param_name = self.siteparam[param]
param_value = getattr(self, param_name)
if (isinstance(param_value, float) and
numpy.isnan(param_value)):
raise ValueError(
'Please set a value for %r, this is required by '
'the GSIM %s' % (param_name, gsim))
@property
def tses(self):
"""
Return the total time as investigation_time * ses_per_logic_tree_path *
(number_of_logic_tree_samples or 1)
"""
return (self.investigation_time * self.ses_per_logic_tree_path *
(self.number_of_logic_tree_samples or 1))
@property
def ses_ratio(self):
"""
The ratio
risk_investigation_time / investigation_time / ses_per_logic_tree_path
"""
return (self.risk_investigation_time or self.investigation_time) / (
self.investigation_time * self.ses_per_logic_tree_path)
@property
def imtls(self):
"""
Returns an OrderedDict with the risk intensity measure types and
levels, if given, or the hazard ones.
"""
imtls = getattr(self, 'hazard_imtls', None) or self.risk_imtls
return collections.OrderedDict(sorted(imtls.items()))
@property
def all_cost_types(self):
"""
Return the cost types of the computation (including `occupants`
if it is there) in order.
"""
return sorted(self.risk_files)
def set_risk_imtls(self, risk_models):
"""
:param risk_models:
a dictionary taxonomy -> loss_type -> risk_function
Set the attribute risk_imtls.
"""
# NB: different loss types may have different IMLs for the same IMT
# in that case we merge the IMLs
imtls = {}
for taxonomy, risk_functions in risk_models.items():
for loss_type, rf in risk_functions.items():
imt = rf.imt
from_string(imt) # make sure it is a valid IMT
imls = list(rf.imls)
if imt in imtls and imtls[imt] != imls:
logging.debug(
'Different levels for IMT %s: got %s, expected %s',
imt, imls, imtls[imt])
imtls[imt] = sorted(set(imls + imtls[imt]))
else:
imtls[imt] = imls
self.risk_imtls = imtls
if self.uniform_hazard_spectra:
self.check_uniform_hazard_spectra()
def loss_dt(self, dtype=numpy.float32):
"""
Return a composite dtype based on the loss types, including occupants
"""
loss_types = self.all_cost_types
dts = [(lt, dtype) for lt in loss_types]
if self.insured_losses:
for lt in loss_types:
dts.append((lt + '_ins', dtype))
return numpy.dtype(dts)
def no_imls(self):
"""
Return True if there are no intensity measure levels
"""
return all(ls is None for ls in self.imtls.values())
def is_valid_truncation_level_disaggregation(self):
"""
Truncation level must be set for disaggregation calculations
"""
if self.calculation_mode == 'disaggregation':
return self.truncation_level is not None
else:
return True
def is_valid_region(self):
"""
If there is a region a region_grid_spacing must be given
"""
return self.region_grid_spacing if self.region else True
def is_valid_geometry(self):
"""
It is possible to infer the geometry only if exactly
one of sites, sites_csv, hazard_curves_csv, gmfs_csv,
region and exposure_file is set. You did set more than
one, or nothing.
"""
if self.calculation_mode not in HAZARD_CALCULATORS:
return True # no check on the sites for risk
flags = dict(
sites=bool(self.sites),
sites_csv=self.inputs.get('sites', 0),
hazard_curves_csv=self.inputs.get('hazard_curves', 0),
gmfs_csv=self.inputs.get('gmvs', 0),
region=bool(self.region),
exposure=self.inputs.get('exposure', 0))
# NB: below we check that all the flags
# are mutually exclusive
return sum(bool(v) for v in flags.values()) == 1 or self.inputs.get(
'site_model')
def is_valid_poes(self):
"""
When computing hazard maps and/or uniform hazard spectra,
the poes list must be non-empty.
"""
if self.hazard_maps or self.uniform_hazard_spectra:
return bool(self.poes)
else:
return True
def is_valid_maximum_distance(self):
"""
Invalid maximum_distance={maximum_distance}: {error}
"""
if 'source_model_logic_tree' not in self.inputs:
return True # don't apply validation
gsim_lt = self.inputs['gsim_logic_tree']
trts = set(self.maximum_distance)
unknown = ', '.join(trts - set(self._gsims_by_trt) - set(['default']))
if unknown:
self.error = ('setting the maximum_distance for %s which is '
'not in %s' % (unknown, gsim_lt))
return False
for trt, val in self.maximum_distance.items():
if val <= 0:
self.error = '%s=%r < 0' % (trt, val)
return False
elif trt not in self._gsims_by_trt and trt != 'default':
self.error = 'tectonic region %r not in %s' % (trt, gsim_lt)
return False
if 'default' not in trts and trts < set(self._gsims_by_trt):
missing = ', '.join(set(self._gsims_by_trt) - trts)
self.error = 'missing distance for %s and no default' % missing
return False
return True
def is_valid_intensity_measure_types(self):
"""
If the IMTs and levels are extracted from the risk models,
they must not be set directly. Moreover, if
`intensity_measure_types_and_levels` is set directly,
`intensity_measure_types` must not be set.
"""
if self.ground_motion_correlation_model:
for imt in self.imtls:
if not (imt.startswith('SA') or imt == 'PGA'):
raise ValueError(
'Correlation model %s does not accept IMT=%s' % (
self.ground_motion_correlation_model, imt))
if self.risk_files: # IMTLs extracted from the risk files
return (self.intensity_measure_types is None and
self.intensity_measure_types_and_levels is None)
elif not hasattr(self, 'hazard_imtls') and not hasattr(
self, 'risk_imtls'):
return False
return True
def is_valid_intensity_measure_levels(self):
"""
In order to compute hazard curves, `intensity_measure_types_and_levels`
must be set or extracted from the risk models.
"""
invalid = self.no_imls() and not self.risk_files and (
self.hazard_curves_from_gmfs or self.calculation_mode in
('classical', 'disaggregation'))
return not invalid
def is_valid_sites_disagg(self):
"""
The option `sites_disagg` (when given) requires `specific_assets` to
be set.
"""
if self.sites_disagg:
return self.specific_assets or 'specific_assets' in self.inputs
return True # a missing sites_disagg is valid
def is_valid_specific_assets(self):
"""
Read the special assets from the parameters `specific_assets` or
`specific_assets_csv`, if present. You cannot have both. The
concept is meaninful only for risk calculators.
"""
if self.specific_assets and 'specific_assets' in self.inputs:
return False
else:
return True
def is_valid_hazard_curves(self):
"""
You must set `hazard_curves_from_gmfs` if `mean_hazard_curves`
or `quantile_hazard_curves` are set.
"""
if self.calculation_mode == 'event_based' and (
self.mean_hazard_curves or self.quantile_hazard_curves):
return self.hazard_curves_from_gmfs
return True
def is_valid_export_dir(self):
"""
The `export_dir` parameter must refer to a directory,
and the user must have the permission to write on it.
"""
if not self.export_dir:
self.export_dir = os.path.expanduser('~') # home directory
logging.warn('export_dir not specified. Using export_dir=%s'
% self.export_dir)
return True
elif not os.path.exists(self.export_dir):
# check that we can write on the parent directory
pdir = os.path.dirname(self.export_dir)
can_write = os.path.exists(pdir) and os.access(pdir, os.W_OK)
if can_write:
os.mkdir(self.export_dir)
return can_write
return os.path.isdir(self.export_dir) and os.access(
self.export_dir, os.W_OK)
def is_valid_inputs(self):
"""
Invalid calculation_mode="{calculation_mode}" or missing
fragility_file/vulnerability_file in the .ini file.
"""
if 'damage' in self.calculation_mode:
return any(key.endswith('_fragility') for key in self.inputs)
elif 'risk' in self.calculation_mode:
return any(key.endswith('_vulnerability') for key in self.inputs)
return True
def is_valid_complex_fault_mesh_spacing(self):
"""
The `complex_fault_mesh_spacing` parameter can be None only if
`rupture_mesh_spacing` is set. In that case it is identified with it.
"""
rms = getattr(self, 'rupture_mesh_spacing', None)
if rms and not getattr(self, 'complex_fault_mesh_spacing', None):
self.complex_fault_mesh_spacing = self.rupture_mesh_spacing
return True
def check_uniform_hazard_spectra(self):
ok_imts = [imt for imt in self.imtls if imt == 'PGA' or
imt.startswith('SA')]
if not ok_imts:
raise ValueError('The `uniform_hazard_spectra` can be True only '
'if the IMT set contains SA(...) or PGA, got %s'
% list(self.imtls))
class OqParam(valid.ParamSet):
area_source_discretization = valid.Param(valid.NoneOr(valid.positivefloat),
None)
asset_correlation = valid.Param(valid.NoneOr(valid.FloatRange(0, 1)), 0)
asset_life_expectancy = valid.Param(valid.positivefloat)
base_path = valid.Param(valid.utf8, '.')
calculation_mode = valid.Param(valid.Choice(*CALCULATORS), '')
coordinate_bin_width = valid.Param(valid.positivefloat)
compare_with_classical = valid.Param(valid.boolean, False)
concurrent_tasks = valid.Param(valid.positiveint,
parallel.executor.num_tasks_hint)
conditional_loss_poes = valid.Param(valid.probabilities, [])
continuous_fragility_discretization = valid.Param(valid.positiveint, 20)
description = valid.Param(valid.utf8_not_empty)
distance_bin_width = valid.Param(valid.positivefloat)
mag_bin_width = valid.Param(valid.positivefloat)
epsilon_sampling = valid.Param(valid.positiveint, 1000)
export_dir = valid.Param(valid.utf8, None)
export_multi_curves = valid.Param(valid.boolean, False)
exports = valid.Param(valid.export_formats, ())
ground_motion_correlation_model = valid.Param(
valid.NoneOr(valid.Choice(*GROUND_MOTION_CORRELATION_MODELS)), None)
ground_motion_correlation_params = valid.Param(valid.dictionary)
ground_motion_fields = valid.Param(valid.boolean, False)
gsim = valid.Param(valid.gsim, None)
hazard_calculation_id = valid.Param(valid.NoneOr(valid.positiveint), None)
hazard_curves_from_gmfs = valid.Param(valid.boolean, False)
hazard_output_id = valid.Param(valid.NoneOr(valid.positiveint))
hazard_maps = valid.Param(valid.boolean, False)
hypocenter = valid.Param(valid.point3d)
ignore_missing_costs = valid.Param(valid.namelist, [])
individual_curves = valid.Param(valid.boolean, True)
inputs = valid.Param(dict, {})
insured_losses = valid.Param(valid.boolean, False)
intensity_measure_types = valid.Param(valid.intensity_measure_types, None)
intensity_measure_types_and_levels = valid.Param(
valid.intensity_measure_types_and_levels, None)
# hazard_imtls = valid.Param(valid.intensity_measure_types_and_levels, {})
interest_rate = valid.Param(valid.positivefloat)
investigation_time = valid.Param(valid.positivefloat, None)
loss_curve_resolution = valid.Param(valid.positiveint, 50)
loss_ratios = valid.Param(valid.loss_ratios, ())
lrem_steps_per_interval = valid.Param(valid.positiveint, 0)
steps_per_interval = valid.Param(valid.positiveint, 0)
master_seed = valid.Param(valid.positiveint, 0)
maximum_distance = valid.Param(valid.positivefloat) # km
asset_hazard_distance = valid.Param(valid.positivefloat, 5) # km
maximum_tile_weight = valid.Param(valid.positivefloat)
mean_hazard_curves = valid.Param(valid.boolean, False)
number_of_ground_motion_fields = valid.Param(valid.positiveint, 0)
number_of_logic_tree_samples = valid.Param(valid.positiveint, 0)
num_epsilon_bins = valid.Param(valid.positiveint)
poes = valid.Param(valid.probabilities)
poes_disagg = valid.Param(valid.probabilities, [])
quantile_hazard_curves = valid.Param(valid.probabilities, [])
quantile_loss_curves = valid.Param(valid.probabilities, [])
random_seed = valid.Param(valid.positiveint, 42)
reference_depth_to_1pt0km_per_sec = valid.Param(valid.positivefloat, 1.)
reference_depth_to_2pt5km_per_sec = valid.Param(valid.positivefloat, 1.)
reference_vs30_type = valid.Param(valid.Choice('measured', 'inferred'),
'measured')
reference_vs30_value = valid.Param(valid.positivefloat, 1.)
reference_backarc = valid.Param(valid.boolean, False)
region = valid.Param(valid.coordinates, None)
region_constraint = valid.Param(valid.wkt_polygon, None)
region_grid_spacing = valid.Param(valid.positivefloat, None)
risk_imtls = valid.Param(valid.intensity_measure_types_and_levels, {})
risk_investigation_time = valid.Param(valid.positivefloat, None)
rupture_mesh_spacing = valid.Param(valid.positivefloat, None)
complex_fault_mesh_spacing = valid.Param(valid.NoneOr(valid.positivefloat),
None)
ses_per_logic_tree_path = valid.Param(valid.positiveint, 1)
sites = valid.Param(valid.NoneOr(valid.coordinates), None)
sites_disagg = valid.Param(valid.NoneOr(valid.coordinates), [])
specific_assets = valid.Param(valid.namelist, [])
statistics = valid.Param(valid.boolean, True)
taxonomies_from_model = valid.Param(valid.boolean, False)
time_event = valid.Param(str, None)
truncation_level = valid.Param(valid.NoneOr(valid.positivefloat), None)
uniform_hazard_spectra = valid.Param(valid.boolean, False)
width_of_mfd_bin = valid.Param(valid.positivefloat, None)
def __init__(self, **names_vals):
super(OqParam, self).__init__(**names_vals)
self.risk_investigation_time = (self.risk_investigation_time
or self.investigation_time)
if ('intensity_measure_types_and_levels' in names_vals
and 'intensity_measure_types' in names_vals):
logging.warn('Ignoring intensity_measure_types since '
'intensity_measure_types_and_levels is set')
if 'intensity_measure_types_and_levels' in names_vals:
self.hazard_imtls = self.intensity_measure_types_and_levels
delattr(self, 'intensity_measure_types_and_levels')
elif 'intensity_measure_types' in names_vals:
self.hazard_imtls = dict.fromkeys(self.intensity_measure_types)
delattr(self, 'intensity_measure_types')
if vulnerability_files(self.inputs):
self.risk_imtls = get_imtls_from_vulnerabilities(self.inputs)
elif fragility_files(self.inputs):
fname = self.inputs['fragility']
ffs = get_fragility_functions(
fname, self.continuous_fragility_discretization)
self.risk_imtls = {fset.imt: fset.imls for fset in ffs.values()}
# check the IMTs vs the GSIMs
if 'gsim_logic_tree' in self.inputs:
if self.gsim:
raise ValueError('If `gsim_logic_tree_file` is set, there '
'must be no `gsim` key')
path = os.path.join(self.base_path, self.inputs['gsim_logic_tree'])
for gsims in logictree.GsimLogicTree(path, []).values.values():
self.check_imts_gsims(list(map(valid.gsim, gsims)))
elif self.gsim is not None:
self.check_imts_gsims([self.gsim])
def check_imts_gsims(self, gsims):
"""
:param gsims: a sequence of GSIM instances
"""
imts = set('SA' if imt.startswith('SA') else imt for imt in self.imtls)
for gsim in gsims:
restrict_imts = gsim.DEFINED_FOR_INTENSITY_MEASURE_TYPES
if restrict_imts:
names = set(cls.__name__ for cls in restrict_imts)
invalid_imts = ', '.join(imts - names)
if invalid_imts:
raise ValueError(
'The IMT %s is not accepted by the GSIM %s' %
(invalid_imts, gsim))
@property
def tses(self):
"""
Return the total time as investigation_time * ses_per_logic_tree_path *
(number_of_logic_tree_samples or 1)
"""
return (self.investigation_time * self.ses_per_logic_tree_path *
(self.number_of_logic_tree_samples or 1))
@property
def imtls(self):
"""
Returns an OrderedDict with the risk intensity measure types and
levels, if given, or the hazard ones.
"""
imtls = getattr(self, 'hazard_imtls', None) or self.risk_imtls
return collections.OrderedDict(sorted(imtls.items()))
def no_imls(self):
"""
Return True if there are no intensity measure levels
"""
return all(ls is None for ls in self.imtls.values())
def is_valid_truncation_level_disaggregation(self):
"""
Truncation level must be set for disaggregation calculations
"""
if self.calculation_mode == 'disaggregation':
return self.truncation_level is not None
else:
return True
def is_valid_geometry(self):
"""
It is possible to infer the geometry only if exactly
one of sites, sites_csv, hazard_curves_csv, gmfs_csv,
region and exposure_file is set. You did set more than
one, or nothing.
"""
if self.calculation_mode not in HAZARD_CALCULATORS:
return True # no check on the sites for risk
flags = dict(sites=bool(self.sites),
sites_csv=self.inputs.get('sites', 0),
hazard_curves_csv=self.inputs.get('hazard_curves', 0),
gmfs_csv=self.inputs.get('gmvs', 0),
region=bool(self.region),
exposure=self.inputs.get('exposure', 0))
# NB: below we check that all the flags
# are mutually exclusive
return sum(
bool(v)
for v in flags.values()) == 1 or self.inputs.get('site_model')
def is_valid_poes(self):
"""
When computing hazard maps and/or uniform hazard spectra,
the poes list must be non-empty.
"""
if self.hazard_maps or self.uniform_hazard_spectra:
return bool(self.poes)
else:
return True
def is_valid_site_model(self):
"""
In absence of a site_model file the site model parameters
must be all set.
"""
if self.calculation_mode in HAZARD_CALCULATORS and (
'site_model' not in self.inputs):
return (self.reference_vs30_type and self.reference_vs30_value
and self.reference_depth_to_2pt5km_per_sec
and self.reference_depth_to_1pt0km_per_sec)
else:
return True
def is_valid_maximum_distance(self):
"""
The maximum_distance must be set for all hazard calculators
"""
return (self.calculation_mode not in HAZARD_CALCULATORS
or getattr(self, 'maximum_distance', None))
def is_valid_intensity_measure_types(self):
"""
If the IMTs and levels are extracted from the risk models,
they must not be set directly. Moreover, if
`intensity_measure_types_and_levels` is set directly,
`intensity_measure_types` must not be set.
"""
if self.ground_motion_correlation_model:
for imt in self.imtls:
if not (imt.startswith('SA') or imt == 'PGA'):
raise ValueError(
'Correlation model %s does not accept IMT=%s' %
(self.ground_motion_correlation_model, imt))
if fragility_files(self.inputs) or vulnerability_files(self.inputs):
return (self.intensity_measure_types is None
and self.intensity_measure_types_and_levels is None)
elif not hasattr(self, 'hazard_imtls') and not hasattr(
self, 'risk_imtls'):
return False
return True
def is_valid_intensity_measure_levels(self):
"""
In order to compute hazard curves, `intensity_measure_types_and_levels`
must be set or extracted from the risk models.
"""
invalid = self.no_imls() and (
self.hazard_curves_from_gmfs or self.calculation_mode
in ('classical', 'classical_tiling', 'disaggregation'))
return not invalid
def is_valid_sites_disagg(self):
"""
The option `sites_disagg` (when given) requires `specific_assets` to
be set.
"""
if self.sites_disagg:
return self.specific_assets or 'specific_assets' in self.inputs
return True # a missing sites_disagg is valid
def is_valid_specific_assets(self):
"""
Read the special assets from the parameters `specific_assets` or
`specific_assets_csv`, if present. You cannot have both. The
concept is meaninful only for risk calculators.
"""
if self.specific_assets and 'specific_assets' in self.inputs:
return False
else:
return True
def is_valid_hazard_curves(self):
"""
You must set `hazard_curves_from_gmfs` if `mean_hazard_curves`
or `quantile_hazard_curves` are set.
"""
if self.calculation_mode == 'event_based' and (
self.mean_hazard_curves or self.quantile_hazard_curves):
return self.hazard_curves_from_gmfs
return True
def is_valid_export_dir(self):
"""
The `export_dir` parameter must refer to a directory,
and the user must have the permission to write on it.
"""
if not self.export_dir:
self.export_dir = os.path.expanduser('~') # home directory
logging.warn('export_dir not specified. Using export_dir=%s' %
self.export_dir)
return True
elif not os.path.exists(self.export_dir):
# check that we can write on the parent directory
pdir = os.path.dirname(self.export_dir)
can_write = os.path.exists(pdir) and os.access(pdir, os.W_OK)
if can_write:
os.mkdir(self.export_dir)
return can_write
return os.path.isdir(self.export_dir) and os.access(
self.export_dir, os.W_OK)
def is_valid_inputs(self):
"""
Invalid calculation_mode="{calculation_mode}" or missing
fragility_file/vulnerability_file in the .ini file.
"""
if 'damage' in self.calculation_mode:
return 'fragility' in self.inputs
elif 'risk' in self.calculation_mode:
return any(key.endswith('_vulnerability') for key in self.inputs)
return True
def is_valid_complex_fault_mesh_spacing(self):
"""
The `complex_fault_mesh_spacing` parameter can be None only if
`rupture_mesh_spacing` is set. In that case it is identified with it.
"""
rms = getattr(self, 'rupture_mesh_spacing', None)
if rms and not getattr(self, 'complex_fault_mesh_spacing', None):
self.complex_fault_mesh_spacing = self.rupture_mesh_spacing
return True