As = 0.60; # area of no. 7 bars
# some variables derived from the parameters
y1 = colDepth/2.0
z1 = colWidth/2.0
ops.section("Fiber", 1)
# Create the concrete core fibers
ops.patch("rect", 1, 10, 1, cover-y1, cover-z1, y1-cover, z1-cover)
# Create the concrete cover fibers (top, bottom, left, right)
ops.patch("rect", 2, 10, 1, -y1, z1-cover, y1, z1)
ops.patch("rect", 2, 10, 1, -y1, -z1, y1, cover-z1)
ops.patch("rect", 2, 2, 1, -y1, cover-z1, cover-y1, z1-cover)
ops.patch("rect", 2, 2, 1, y1-cover, cover-z1, y1, z1-cover)
# Create the reinforcing fibers (left, middle, right)
ops.layer("straight", 3, 3, As, y1-cover, z1-cover, y1-cover, cover-z1)
ops.layer("straight", 3, 2, As, 0.0, z1-cover, 0.0, cover-z1)
ops.layer("straight", 3, 3, As, cover-y1, z1-cover, cover-y1, cover-z1)
# define beam integration
np = 5; # number of integration points along length of element
ops.beamIntegration("Lobatto", 1, 1, np)
# Define column elements
# ----------------------
# Geometry of column elements
# tag
ops.geomTransf("PDelta", 1)
# Create the coulumns using Beam-column elements
# tag ndI ndJ transfTag integrationTag
eleType = "forceBeamColumn"
E = 30000.0; # Young's modulus
# tag fy E0 b
ops.uniaxialMaterial("Steel01", 3, fy, E, 0.015)
# Define cross-section for nonlinear columns
# ------------------------------------------
# Interior column section
ops.section("Fiber", 1)
# mat nfIJ nfJK yI zI yJ zJ yK zK yL zL
ops.patch("quad", 2, 1, 12, -11.5, 10.0, -11.5, -10.0, 11.5, -10.0, 11.5, 10.0)
ops.patch("quad", 1, 1, 14, -13.5, -10.0, -13.5, -12.0, 13.5, -12.0, 13.5, -10.0)
ops.patch("quad", 1, 1, 14, -13.5, 12.0, -13.5, 10.0, 13.5, 10.0, 13.5, 12.0)
ops.patch("quad", 1, 1, 2, -13.5, 10.0, -13.5, -10.0, -11.5, -10.0, -11.5, 10.0)
ops.patch("quad", 1, 1, 2, 11.5, 10.0, 11.5, -10.0, 13.5, -10.0, 13.5, 10.0)
# mat nBars area yI zI yF zF
ops.layer("straight", 3, 6, 1.56, -10.5, 9.0, -10.5, -9.0)
ops.layer("straight", 3, 6, 1.56, 10.5, 9.0, 10.5, -9.0)
# define beam integration
np = 4; # number of integration points along length of element
ops.beamIntegration("Lobatto", 1, 1, np)
# Exterior column section
ops.section("Fiber", 2)
ops.patch("quad", 2, 1, 10, -10.0, 10.0, -10.0, -10.0, 10.0, -10.0, 10.0, 10.0)
ops.patch("quad", 1, 1, 12, -12.0, -10.0, -12.0, -12.0, 12.0, -12.0, 12.0, -10.0)
ops.patch("quad", 1, 1, 12, -12.0, 12.0, -12.0, 10.0, 12.0, 10.0, 12.0, 12.0)
ops.patch("quad", 1, 1, 2, -12.0, 10.0, -12.0, -10.0, -10.0, -10.0, -10.0, 10.0)
ops.patch("quad", 1, 1, 2, 10.0, 10.0, 10.0, -10.0, 12.0, -10.0, 12.0, 10.0)
ops.layer("straight", 3, 6, 0.79, -9.0, 9.0, -9.0, -9.0)
ops.layer("straight", 3, 6, 0.79, 9.0, 9.0, 9.0, -9.0)
# define beam integration
# area of no. 7 bars
# some variables derived from the parameters
y1 = colDepth / 2.0
z1 = colWidth / 2.0
ops.section("Fiber", 1)
# Create the concrete core fibers
ops.patch("rect", 1, 10, 1, cover - y1, cover - z1, y1 - cover, z1 - cover)
# Create the concrete cover fibers (top, bottom, left, right)
ops.patch("rect", 2, 10, 1, -y1, z1 - cover, y1, z1)
ops.patch("rect", 2, 10, 1, -y1, -z1, y1, cover - z1)
ops.patch("rect", 2, 2, 1, -y1, cover - z1, cover - y1, z1 - cover)
ops.patch("rect", 2, 2, 1, y1 - cover, cover - z1, y1, z1 - cover)
# Create the reinforcing fibers (left, middle, right)
ops.layer("straight", 3, 3, As, y1 - cover, z1 - cover, y1 - cover, cover - z1)
ops.layer("straight", 3, 2, As, 0.0, z1 - cover, 0.0, cover - z1)
ops.layer("straight", 3, 3, As, cover - y1, z1 - cover, cover - y1, cover - z1)
# Estimate yield curvature
# (Assuming no axial load and only top and bottom steel)
d = colDepth - cover
# d -- from cover to rebar
epsy = fy / E
# steel yield strain
Ky = epsy / (0.7 * d)
# Print estimate to standard output
print("Estimated yield curvature: ", Ky)
# Set axial load
ops.uniaxialMaterial("Steel01", 3, fy, E, 0.015)
# Define cross-section for nonlinear columns
# ------------------------------------------
# Interior column section
ops.section("Fiber", 1)
# mat nfIJ nfJK yI zI yJ zJ yK zK yL zL
ops.patch("quad", 2, 1, 12, -11.5, 10.0, -11.5, -10.0, 11.5, -10.0, 11.5, 10.0)
ops.patch("quad", 1, 1, 14, -13.5, -10.0, -13.5, -12.0, 13.5, -12.0, 13.5,
-10.0)
ops.patch("quad", 1, 1, 14, -13.5, 12.0, -13.5, 10.0, 13.5, 10.0, 13.5, 12.0)
ops.patch("quad", 1, 1, 2, -13.5, 10.0, -13.5, -10.0, -11.5, -10.0, -11.5,
10.0)
ops.patch("quad", 1, 1, 2, 11.5, 10.0, 11.5, -10.0, 13.5, -10.0, 13.5, 10.0)
# mat nBars area yI zI yF zF
ops.layer("straight", 3, 6, 1.56, -10.5, 9.0, -10.5, -9.0)
ops.layer("straight", 3, 6, 1.56, 10.5, 9.0, 10.5, -9.0)
# define beam integration
np = 4
# number of integration points along length of element
ops.beamIntegration("Lobatto", 1, 1, np)
# Exterior column section
ops.section("Fiber", 2)
ops.patch("quad", 2, 1, 10, -10.0, 10.0, -10.0, -10.0, 10.0, -10.0, 10.0, 10.0)
ops.patch("quad", 1, 1, 12, -12.0, -10.0, -12.0, -12.0, 12.0, -12.0, 12.0,
-10.0)
ops.patch("quad", 1, 1, 12, -12.0, 12.0, -12.0, 10.0, 12.0, 10.0, 12.0, 12.0)
ops.patch("quad", 1, 1, 2, -12.0, 10.0, -12.0, -10.0, -10.0, -10.0, -10.0,
10.0)
ops.patch("quad", 1, 1, 2, 10.0, 10.0, 10.0, -10.0, 12.0, -10.0, 12.0, 10.0)
