def __init__(self, name = "no name", type_in = "generic"): """ Constructor. Creates an empty accelerator node. """ NamedObject.__init__(self, name) TypedObject.__init__(self, type_in) ParamsDictObject.__init__(self) self.AccNode = orbit.lattice.AccNode #------------------------------------------------ # nParts - number of parts in the body of node #------------------------------------------------ self.__nParts = 1 self.__lengthArr = [0.] self.__length = 0. self.__activePartIndex = 0 #------------------------------------------------ # Child nodes are placed at the entrance, inside the body, # or at the exit of this node. In the body, child nodes # can be added before or after any part. # Child nodes may be diagnostics, collective effects, # apertures, etc. # Body child nodes - list containing lists of two lists # (before and after each part) of nodes #------------------------------------------------ self.__childNodesArr = [[],[[[],[]]],[]] self._setPartsLengthEvenly(self.__nParts)
def __init__(self, name="no name", type_in="generic"):
"""
Constructor. Creates an empty accelerator node.
"""
NamedObject.__init__(self, name)
TypedObject.__init__(self, type_in)
ParamsDictObject.__init__(self)
self.AccNode = orbit.lattice.AccNode
#------------------------------------------------
# nParts - number of parts in the body of node
#------------------------------------------------
self.__nParts = 1
self.__lengthArr = [0.]
self.__length = 0.
self.__activePartIndex = 0
#------------------------------------------------
# Child nodes are placed at the entrance, inside the body,
# or at the exit of this node. In the body, child nodes
# can be added before or after any part.
# Child nodes may be diagnostics, collective effects,
# apertures, etc.
# Body child nodes - list containing lists of two lists
# (before and after each part) of nodes
#------------------------------------------------
self.__childNodesArr = [[], [[[], []]], []]
self._setPartsLengthEvenly(self.__nParts)
def __init__(self, name = "none"):
NamedObject.__init__(self, name)
ParamsDictObject.__init__(self)
self.__linacNodes = []
self.addParam("position",0.)
self.addParam("length",0.)
self.addParam("linacAccLattice",None)
def __init__(self, name = "root"): """ The XmlDataAdaptor constructor. The default name is 'root'. It is an analog of the XAL XmlDataAdaptor class. The Attributes are replaced by parameters. """ NamedObject.__init__(self,name) ParamsDictObject.__init__(self) self.data_adaptors = []
def __init__(self, name = "root"): """ The XmlDataAdaptor constructor. The default name is 'root'. It is an analog of the XAL XmlDataAdaptor class. The Attributes are replaced by parameters. """ NamedObject.__init__(self,name) ParamsDictObject.__init__(self) self.data_adaptors = []
def __init__(self, name = "no_name", type_in = "Base_Error_Controller"): NamedObject.__init__(self, name) TypedObject.__init__(self, type_in) ParamsDictObject.__init__(self) #-------------------------------------- #---- entrance and exit Error AccNodes self.entranceAccNode = None self.exitAccNode = None self.entranceAccNodeParent = None self.exitAccNodeParent = None self.accLattice = None
def __init__(self, name = "none"):
NamedObject.__init__(self, name)
ParamsDictObject.__init__(self)
self.__rfGaps = []
self.addParam("frequency",0.)
self.addParam("phase",0.)
self.addParam("amp",0.)
self.addParam("designPhase",0.)
self.addParam("designAmp",0.)
self.addParam("designArrivalTime",0.)
self.addParam("isDesignSetUp",False)
def __init__(self, name="none"):
NamedObject.__init__(self, name)
ParamsDictObject.__init__(self)
self.__rfGaps = []
#---- firstGapEntrancePhase is used by gaps instead of phase in the case
#---- of non-zero length gaps
self.__firstGapEntrancePhase = 0.
self.__firstGapEntranceDesignPhase = 0.
self.addParam("frequency", 0.)
self.addParam("phase", 0.)
self.addParam("amp", 1.)
self.addParam("designPhase", 0.)
self.addParam("designAmp", 1.)
self.addParam("designArrivalTime", 0.)
self.addParam("isDesignSetUp", False)
self.addParam("pos", 0.)
def clean(self): """ Remove all data. """ ParamsDictObject.__init__(self) self.data_adaptors = []
def clean(self): """ Remove all data. """ ParamsDictObject.__init__(self) self.data_adaptors = []
def __init__(self, name = "None"): NamedObject.__init__(self,name) TypedObject.__init__(self,type_in = "linac") ParamsDictObject.__init__(self) self.seqs = [] self.length = 0.
def __init__(self,name = "node"):
NamedObject.__init__(self,name)
TypedObject.__init__(self,type_in = "none")
ParamsDictObject.__init__(self)
self.setParam("length",0.)
def __init__(self, *arg, **kwargs):
"""
The constructor of the VariableProxy class should have the following signatures
VariableProxy(parameterProxy_in)
VariableProxy(name, value, step)
VariableProxy(name = ""???"", value = ???, step = ???)
"""
ParamsDictObject.__init__(self)
self.setName("unknown")
self.value = 0.
self.step = 0.
self.useInSolver = True
self.lowerLimit = - 0.00000001*sys.float_info.max
self.upperLimit = + 0.00000001*sys.float_info.max
#print "debug len(arg)=",len(arg)," arg=",arg
#print "debug len(kwargs)=",len(kwargs)," kwargs=",kwargs
if(not (len(arg) != 1 and len(arg) != 2 and len(arg) != 3)):
if(len(arg) == 1):
varProxy = arg[0]
if(isinstance(varProxy,VariableProxy)):
self.setName(varProxy.getName())
self.value = varProxy.getValue()
self.step = varProxy.getStep()
self.useInSolver = varProxy.getUseInSolver()
self.lowerLimit = varProxy.getLowerLimit()
self.upperLimit = varProxy.getUpperLimit()
self.updateParamsDict(varProxy.getParamsDict())
else:
msg = "VariableProxy constructor. If there is only one argument it should be only VariableProxy."
msg = msg + os.linesep
msg = "This argument is not!"
msg = msg + os.linesep
msg = msg + "Stop."
msg = msg + os.linesep
orbitFinalize(msg)
elif(len(arg) == 2):
self.setName(arg[0])
self.value = arg[1]
self.step = 0.
else:
self.setName(arg[0])
self.value = arg[1]
self.step = arg[2]
elif(len(arg) == 0 and len(kwargs) == 3 and kwargs.has_key("name") and kwargs.has_key("value") and kwargs.has_key("step")):
self.setName(kwargs["name"])
self.value = kwargs["value"]
self.step = kwargs["step"]
else:
msg = "VariableProxy constructor. It should have one of the forms:"
msg += os.linesep
msg += "1. Copy constructor: VariableProxy(parameterProxy_in)"
msg += os.linesep
msg += "2. VariableProxy(name, value)"
msg += os.linesep
msg += "3. VariableProxy(name, value, step)"
msg += os.linesep
msg += "4. VariableProxy(name = ""???"", value = ???, step = ???)"
msg += os.linesep
msg += "Stop."
msg += os.linesep
orbitFinalize(msg)
def __init__(self, name="None"):
NamedObject.__init__(self, name)
TypedObject.__init__(self, type_in="linac")
ParamsDictObject.__init__(self)
self.seqs = []
self.length = 0.
def __init__(self, name="node"):
NamedObject.__init__(self, name)
TypedObject.__init__(self, type_in="none")
ParamsDictObject.__init__(self)
self.setParam("length", 0.)