def configuration(topology, request):
sw1 = topology.get('sw1')
sw2 = topology.get('sw2')
sw3 = topology.get('sw3')
assert sw1 is not None
assert sw2 is not None
assert sw3 is not None
# Configuring ip address for sw1, sw2 and sw3
configure_interface(sw1, SW1_INTF1, SW1_INTF1_IPV4_ADDR)
configure_interface(sw1, SW1_INTF2, SW1_INTF2_IPV4_ADDR)
configure_interface(sw2, SW2_INTF1, SW2_INTF1_IPV4_ADDR)
configure_interface(sw3, SW3_INTF1, SW3_INTF1_IPV4_ADDR)
ports_sw1 = [sw1.ports[SW1_INTF1], sw1.ports[SW1_INTF2]]
verify_turn_on_interfaces(sw1, ports_sw1)
verify_turn_on_interfaces(sw2, [sw2.ports[SW2_INTF1]])
verify_turn_on_interfaces(sw3, [sw3.ports[SW3_INTF1]])
# Configuring ospf with network command in sw1, sw2 and sw3
configure_ospf_router(sw1, SW1_ROUTER_ID, SW1_INTF1_IPV4_ADDR, OSPF_AREA_1)
configure_ospf_router(sw1, SW1_ROUTER_ID, SW1_INTF2_IPV4_ADDR, OSPF_AREA_1)
configure_ospf_router(sw2, SW2_ROUTER_ID, SW2_INTF1_IPV4_ADDR, OSPF_AREA_1)
configure_ospf_router(sw3, SW3_ROUTER_ID, SW3_INTF1_IPV4_ADDR, OSPF_AREA_1)
def configuration(topology, request):
sw1 = topology.get('sw1')
sw2 = topology.get('sw2')
sw3 = topology.get('sw3')
sw4 = topology.get('sw4')
sw5 = topology.get('sw5')
assert sw1 is not None
assert sw2 is not None
assert sw3 is not None
assert sw4 is not None
assert sw5 is not None
configure_interface(sw1, SW1_INTF1, SW1_INTF1_IPV4_ADDR)
configure_interface(sw1, SW1_INTF2, SW1_INTF2_IPV4_ADDR)
configure_interface(sw2, SW2_INTF1, SW2_INTF1_IPV4_ADDR)
configure_interface(sw2, SW2_INTF2, SW2_INTF2_IPV4_ADDR)
configure_interface(sw3, SW3_INTF1, SW3_INTF1_IPV4_ADDR)
configure_interface(sw3, SW3_INTF2, SW3_INTF2_IPV4_ADDR)
configure_interface(sw4, SW4_INTF1, SW4_INTF1_IPV4_ADDR)
configure_interface(sw5, SW5_INTF2, SW5_INTF2_IPV4_ADDR)
ports_sw1 = [sw1.ports[SW1_INTF1], sw1.ports[SW1_INTF2]]
verify_turn_on_interfaces(sw1, ports_sw1)
ports_sw2 = [sw2.ports[SW2_INTF1], sw2.ports[SW2_INTF2]]
verify_turn_on_interfaces(sw2, ports_sw2)
ports_sw3 = [sw3.ports[SW3_INTF1], sw3.ports[SW3_INTF2]]
verify_turn_on_interfaces(sw3, ports_sw3)
ports_sw4 = [sw4.ports[SW4_INTF1]]
verify_turn_on_interfaces(sw4, ports_sw4)
ports_sw5 = [sw5.ports[SW5_INTF2]]
verify_turn_on_interfaces(sw5, ports_sw5)
# Configuring ospf with network command in sw1, sw2, sw3, sw4 and sw5
configure_ospf_router(sw1, SW1_ROUTER_ID, SW1_INTF1_IPV4_ADDR,
OSPF_AREA_100)
configure_ospf_router(sw1, SW1_ROUTER_ID, SW1_INTF2_IPV4_ADDR,
OSPF_AREA_100)
configure_ospf_router(sw2, SW2_ROUTER_ID, SW2_INTF1_IPV4_ADDR,
OSPF_AREA_100)
configure_ospf_router(sw2, SW2_ROUTER_ID, SW2_INTF2_IPV4_ADDR,
OSPF_AREA_0)
configure_ospf_router(sw3, SW3_ROUTER_ID, SW3_INTF1_IPV4_ADDR,
OSPF_AREA_200)
configure_ospf_router(sw3, SW3_ROUTER_ID, SW3_INTF2_IPV4_ADDR,
OSPF_AREA_0)
configure_ospf_router(sw4, SW4_ROUTER_ID, SW4_INTF1_IPV4_ADDR,
OSPF_AREA_200)
configure_ospf_router(sw5, SW5_ROUTER_ID, SW5_INTF2_IPV4_ADDR,
OSPF_AREA_100)
def configuration(topology, request):
sw1 = topology.get('sw1')
sw2 = topology.get('sw2')
sw3 = topology.get('sw3')
hs1 = topology.get('hs1')
hs2 = topology.get('hs2')
assert sw1 is not None
assert sw2 is not None
assert sw3 is not None
assert hs1 is not None
assert hs2 is not None
# Configuring ip address for sw2 and sw3
configure_interface(sw1, SW1_INTF1, SW1_INTF1_IPV4_ADDR)
configure_interface(sw1, SW1_INTF2, SW1_INTF2_IPV4_ADDR)
configure_interface(sw2, SW2_INTF1, SW2_INTF1_IPV4_ADDR)
configure_interface(sw2, SW2_INTF2, SW2_INTF2_IPV4_ADDR)
configure_interface(sw3, SW3_INTF1, SW3_INTF1_IPV4_ADDR)
configure_interface(sw3, SW3_INTF2, SW3_INTF2_IPV4_ADDR)
ports_sw1 = [sw1.ports[SW1_INTF1], sw1.ports[SW1_INTF2]]
verify_turn_on_interfaces(sw1, ports_sw1)
ports_sw2 = [sw2.ports[SW2_INTF1], sw2.ports[SW2_INTF2]]
verify_turn_on_interfaces(sw2, ports_sw2)
ports_sw3 = [sw3.ports[SW3_INTF1], sw3.ports[SW3_INTF2]]
verify_turn_on_interfaces(sw3, ports_sw3)
# Configure IP and bring UP host 1 interfaces
hs1.libs.ip.interface('1', addr='10.10.40.2/24', up=True)
# Configure IP and bring UP host 2 interfaces
hs2.libs.ip.interface('1', addr='10.10.30.2/24', up=True)
# Configuring ospf with network command in sw2 and sw3
configure_ospf_router(sw1, SW1_ROUTER_ID, SW1_INTF1_IPV4_ADDR, OSPF_AREA_1)
configure_ospf_router(sw2, SW2_ROUTER_ID, SW2_INTF1_IPV4_ADDR, OSPF_AREA_1)
configure_ospf_router(sw2, SW2_ROUTER_ID, SW2_INTF2_IPV4_ADDR, OSPF_AREA_1)
configure_ospf_router(sw3, SW3_ROUTER_ID, SW3_INTF2_IPV4_ADDR, OSPF_AREA_1)