def setUp(self): self.test_shape = paramak.CenterColumnShieldFlatTopHyperbola( height=600, arc_height=400, inner_radius=100, mid_radius=150, outer_radius=200)
def _make_center_column_shield(self): self._center_column_shield = paramak.CenterColumnShieldFlatTopHyperbola( height=self._center_column_shield_end_height * 2., arc_height=self.center_column_arc_vertical_thickness, inner_radius=self._center_column_shield_start_radius, mid_radius=self._center_column_shield_end_radius_mid, outer_radius=self._center_column_shield_end_radius_upper, rotation_angle=self.rotation_angle) self.shapes_and_components.append(self._center_column_shield)
def test_CenterColumnShieldFlatTopHyperbola_creation(self): """creates a CenterColumnShieldFlatTopHyperbola object and checks a solid is created""" test_shape = paramak.CenterColumnShieldFlatTopHyperbola( height=500, arc_height=300, inner_radius=50, mid_radius=100, outer_radius=150, ) assert test_shape.solid is not None assert test_shape.volume > 1000
def test_construction_with_CenterColumnShieldFlatTopHyperbola(self): """Makes a firstwall with from a CenterColumnShieldFlatTopHyperbola and checks the volume is smaller than the shield""" a = paramak.CenterColumnShieldFlatTopHyperbola(height=200, arc_height=100, inner_radius=50, mid_radius=80, outer_radius=100) b = paramak.InboardFirstwallFCCS(central_column_shield=a, thickness=20, rotation_angle=180) assert a.solid is not None assert b.solid is not None assert a.volume > b.volume
def test_CenterColumnShieldFlatTopHyperbola_creation(self): """creates a center column shield using the CenterColumnShieldFlatTopHyperbola parametric component and checks that a cadquery solid is created""" test_shape = paramak.CenterColumnShieldFlatTopHyperbola( height=500, arc_height=300, inner_radius=50, mid_radius=100, outer_radius=150, ) assert test_shape.solid is not None assert test_shape.volume > 1000
def main(): rot_angle = 180 all_components = [] plasma = paramak.Plasma( # default parameters rotation_angle=rot_angle, stp_filename="plasma_shape.stp", ) all_components.append(plasma) component = paramak.BlanketFP( plasma=plasma, thickness=100, stop_angle=90, start_angle=-90, offset_from_plasma=30, rotation_angle=rot_angle, stp_filename="blanket_constant_thickness_outboard_plasma.stp", ) all_components.append(component) component = paramak.BlanketCutterStar(height=2000, width=2000, distance=100) all_components.append(component) component = paramak.BlanketFP( plasma=plasma, thickness=100, stop_angle=90, start_angle=250, offset_from_plasma=30, rotation_angle=rot_angle, stp_filename="blanket_constant_thickness_inboard_plasma.stp", ) all_components.append(component) component = paramak.BlanketFP( plasma=plasma, thickness=100, stop_angle=250, start_angle=-90, offset_from_plasma=30, rotation_angle=rot_angle, stp_filename="blanket_constant_thickness_plasma.stp", ) all_components.append(component) CenterColumnShieldCylinder = paramak.CenterColumnShieldCylinder( inner_radius=80, outer_radius=100, height=300, rotation_angle=rot_angle, stp_filename="center_column_shield_cylinder.stp", ) all_components.append(CenterColumnShieldCylinder) component = paramak.InboardFirstwallFCCS( central_column_shield=CenterColumnShieldCylinder, thickness=50, rotation_angle=rot_angle, stp_filename="firstwall_from_center_column_shield_cylinder.stp", ) all_components.append(component) CenterColumnShieldHyperbola = paramak.CenterColumnShieldHyperbola( inner_radius=50, mid_radius=75, outer_radius=100, height=300, rotation_angle=rot_angle, stp_filename="center_column_shield_hyperbola.stp", ) all_components.append(CenterColumnShieldHyperbola) component = paramak.InboardFirstwallFCCS( central_column_shield=CenterColumnShieldHyperbola, thickness=50, rotation_angle=rot_angle, stp_filename="firstwall_from_center_column_shield_hyperbola.stp", ) all_components.append(component) CenterColumnShieldCircular = paramak.CenterColumnShieldCircular( inner_radius=50, mid_radius=75, outer_radius=100, height=300, rotation_angle=rot_angle, stp_filename="center_column_shield_circular.stp", ) all_components.append(CenterColumnShieldCircular) component = paramak.InboardFirstwallFCCS( central_column_shield=CenterColumnShieldCircular, thickness=50, rotation_angle=rot_angle, stp_filename="firstwall_from_center_column_shield_circular.stp", ) all_components.append(component) CenterColumnShieldFlatTopHyperbola = paramak.CenterColumnShieldFlatTopHyperbola( inner_radius=50, mid_radius=75, outer_radius=100, arc_height=220, height=300, rotation_angle=rot_angle, stp_filename="center_column_shield_flat_top_hyperbola.stp", ) all_components.append(CenterColumnShieldFlatTopHyperbola) component = paramak.InboardFirstwallFCCS( central_column_shield=CenterColumnShieldFlatTopHyperbola, thickness=50, rotation_angle=rot_angle, stp_filename= "firstwall_from_center_column_shield_flat_top_hyperbola.stp", ) all_components.append(component) CenterColumnShieldFlatTopCircular = paramak.CenterColumnShieldFlatTopCircular( inner_radius=50, mid_radius=75, outer_radius=100, arc_height=220, height=300, rotation_angle=rot_angle, stp_filename="center_column_shield_flat_top_Circular.stp", ) all_components.append(CenterColumnShieldFlatTopCircular) component = paramak.InboardFirstwallFCCS( central_column_shield=CenterColumnShieldFlatTopCircular, thickness=50, rotation_angle=rot_angle, stp_filename= "firstwall_from_center_column_shield_flat_top_Circular.stp", ) all_components.append(component) CenterColumnShieldPlasmaHyperbola = paramak.CenterColumnShieldPlasmaHyperbola( inner_radius=150, mid_offset=50, edge_offset=40, height=800, rotation_angle=rot_angle, stp_filename="center_column_shield_plasma_hyperbola.stp", ) all_components.append(CenterColumnShieldPlasmaHyperbola) component = paramak.InboardFirstwallFCCS( central_column_shield=CenterColumnShieldPlasmaHyperbola, thickness=50, rotation_angle=rot_angle, stp_filename="firstwall_from_center_column_shield_plasma_hyperbola.stp", ) all_components.append(component) component = paramak.InnerTfCoilsCircular( inner_radius=25, outer_radius=100, number_of_coils=10, gap_size=5, height=300, stp_filename="inner_tf_coils_circular.stp", ) all_components.append(component) component = paramak.InnerTfCoilsFlat( inner_radius=25, outer_radius=100, number_of_coils=10, gap_size=5, height=300, stp_filename="inner_tf_coils_flat.stp", ) all_components.append(component) # this makes 4 pf coil cases pf_coil_set = paramak.PoloidalFieldCoilCaseSet( heights=[10, 10, 20, 20], widths=[10, 10, 20, 40], casing_thicknesses=[5, 5, 10, 10], center_points=[(100, 100), (100, 150), (50, 200), (50, 50)], rotation_angle=rot_angle, stp_filename="pf_coil_case_set.stp") all_components.append(pf_coil_set) # this makes 4 pf coils pf_coil_set = paramak.PoloidalFieldCoilSet(heights=[10, 10, 20, 20], widths=[10, 10, 20, 40], center_points=[(100, 100), (100, 150), (50, 200), (50, 50)], rotation_angle=rot_angle, stp_filename="pf_coil_set.stp") all_components.append(pf_coil_set) # this makes 4 pf coil cases for the 4 pf coils made above component = paramak.PoloidalFieldCoilCaseSetFC( pf_coils=pf_coil_set, casing_thicknesses=[5, 5, 10, 10], rotation_angle=rot_angle, stp_filename="pf_coil_cases_set.stp") all_components.append(component) # this makes 1 pf coils pf_coil = paramak.PoloidalFieldCoil(center_point=(100, 100), height=20, width=20, rotation_angle=rot_angle, stp_filename="poloidal_field_coil.stp") all_components.append(pf_coil) # this makes one PF coil case for the provided pf coil component = paramak.PoloidalFieldCoilCaseSetFC( pf_coils=[pf_coil], casing_thicknesses=[10], rotation_angle=rot_angle, stp_filename="pf_coil_cases_set_fc.stp") all_components.append(component) component = paramak.PoloidalFieldCoilCaseFC( pf_coil=pf_coil, casing_thickness=10, rotation_angle=rot_angle, stp_filename="poloidal_field_coil_case_fc.stp", ) all_components.append(component) component = paramak.PoloidalFieldCoilCase( center_point=(100, 100), coil_height=20, coil_width=20, casing_thickness=10, rotation_angle=rot_angle, stp_filename="poloidal_field_coil_case.stp", ) all_components.append(component) component = paramak.BlanketConstantThicknessArcV( inner_lower_point=(300, -200), inner_mid_point=(500, 0), inner_upper_point=(300, 200), thickness=100, rotation_angle=rot_angle, stp_filename="blanket_arc_v.stp", ) all_components.append(component) component = paramak.BlanketConstantThicknessArcH( inner_lower_point=(300, -200), inner_mid_point=(400, 0), inner_upper_point=(300, 200), thickness=100, rotation_angle=rot_angle, stp_filename="blanket_arc_h.stp", ) all_components.append(component) component = paramak.ToroidalFieldCoilRectangle( horizontal_start_point=(100, 700), vertical_mid_point=(800, 0), thickness=150, distance=60, stp_filename="tf_coil_rectangle.stp", number_of_coils=1, ) all_components.append(component) component = paramak.ToroidalFieldCoilCoatHanger( horizontal_start_point=(200, 500), horizontal_length=400, vertical_mid_point=(700, 50), vertical_length=500, thickness=50, distance=50, stp_filename="toroidal_field_coil_coat_hanger.stp", number_of_coils=1, ) all_components.append(component) component = paramak.ToroidalFieldCoilTripleArc( R1=80, h=200, radii=(70, 100), coverages=(60, 60), thickness=30, distance=30, number_of_coils=1, stp_filename="toroidal_field_coil_triple_arc.stp") all_components.append(component) magnet = paramak.ToroidalFieldCoilPrincetonD( R1=80, R2=300, thickness=30, distance=30, number_of_coils=1, stp_filename="toroidal_field_coil_princeton_d.stp") all_components.append(magnet) component = paramak.ITERtypeDivertor( # default parameters rotation_angle=rot_angle, stp_filename="ITER_type_divertor.stp", ) all_components.append(component) component = paramak.PortCutterRotated(center_point=(450, 0), polar_coverage_angle=20, rotation_angle=10, polar_placement_angle=45, azimuth_placement_angle=0) all_components.append(component) component = paramak.PortCutterRectangular( distance=3, z_pos=0, height=0.2, width=0.4, fillet_radius=0.02, azimuth_placement_angle=[0, 45, 90, 180]) all_components.append(component) component = paramak.PortCutterCircular( distance=3, z_pos=0.25, radius=0.1, # azimuth_placement_angle=[0, 45, 90, 180], # TODO: fix issue #548 azimuth_placement_angle=[0, 45, 90], ) all_components.append(component) component = paramak.VacuumVessel(height=2, inner_radius=1, thickness=0.2, rotation_angle=270) all_components.append(component) component = paramak.CoolantChannelRingStraight( height=200, channel_radius=10, ring_radius=70, number_of_coolant_channels=8, workplane="XY", rotation_axis="Z", stp_filename="coolant_channel_ring_straight.stp", ) all_components.append(component) component = paramak.CoolantChannelRingCurved( height=200, channel_radius=10, ring_radius=70, mid_offset=-20, number_of_coolant_channels=8, workplane="XY", path_workplane="XZ", stp_filename="coolant_channel_ring_curved.stp", force_cross_section=True) all_components.append(component) component = paramak.RotatedIsoscelesTriangle( height=20, base_length=15, pivot_angle=0, pivot_point=(100, 50), rotation_angle=70, workplane='XY', stp_filename='rotated_isosceles_triangle.stp') all_components.append(component) component = paramak.RotatedTrapezoid(length_1=10, length_2=20, length_3=30, pivot_angle=0, pivot_point=(100, 50), rotation_angle=45, stp_filename='rotated_trapezoid.stp') all_components.append(component) component = paramak.PoloidalSegments(number_of_segments=5, center_point=(400, 50)) all_components.append(component) component = paramak.TFCoilCasing(magnet=magnet, inner_offset=10, outer_offset=15, vertical_section_offset=20, distance=40) all_components.append(component) component = paramak.HexagonPin(length_of_side=5, distance=10, center_point=(10, 20)) all_components.append(component) return all_components
def main(): rot_angle = 180 all_components = [] plasma = paramak.Plasma( # default parameters rotation_angle=rot_angle, stp_filename='plasma_shape.stp') all_components.append(plasma) component = paramak.BlanketConstantThicknessFP( plasma=plasma, thickness=100, stop_angle=90, start_angle=-90, offset_from_plasma=30, rotation_angle=180, stp_filename='blanket_constant_thickness_outboard_plasma.stp') all_components.append(component) component = paramak.BlanketConstantThicknessFP( plasma=plasma, thickness=100, stop_angle=90, start_angle=250, offset_from_plasma=30, rotation_angle=180, stp_filename='blanket_constant_thickness_inboard_plasma.stp') all_components.append(component) component = paramak.BlanketConstantThicknessFP( plasma=plasma, thickness=100, stop_angle=250, start_angle=-90, offset_from_plasma=30, rotation_angle=180, stp_filename='blanket_constant_thickness_plasma.stp') all_components.append(component) component = paramak.ToroidalFieldCoilCoatHanger( horizontal_start_point=(200, 500), horizontal_length=400, vertical_start_point=(700, 50), vertical_length=500, thickness=50, distance=50, stp_filename='toroidal_field_coil_coat_hanger.stp', number_of_coils=5) all_components.append(component) component = paramak.CenterColumnShieldCylinder( inner_radius=80, outer_radius=100, height=300, rotation_angle=rot_angle, stp_filename='center_column_shield_cylinder.stp') all_components.append(component) component = paramak.CenterColumnShieldHyperbola( inner_radius=50, mid_radius=75, outer_radius=100, height=300, rotation_angle=rot_angle, stp_filename='center_column_shield_hyperbola.stp') all_components.append(component) component = paramak.CenterColumnShieldCircular( inner_radius=50, mid_radius=75, outer_radius=100, height=300, rotation_angle=rot_angle, stp_filename='center_column_shield_circular.stp') all_components.append(component) component = paramak.CenterColumnShieldFlatTopHyperbola( inner_radius=50, mid_radius=75, outer_radius=100, arc_height=220, height=300, rotation_angle=rot_angle, stp_filename='center_column_shield_flat_top_hyperbola.stp') all_components.append(component) component = paramak.CenterColumnShieldFlatTopCircular( inner_radius=50, mid_radius=75, outer_radius=100, arc_height=220, height=300, rotation_angle=rot_angle, stp_filename='center_column_shield_flat_top_Circular.stp') all_components.append(component) component = paramak.CenterColumnShieldPlasmaHyperbola( inner_radius=150, mid_offset=50, edge_offset=40, height=800, rotation_angle=rot_angle, stp_filename='center_column_shield_plasma_hyperbola.stp') all_components.append(component) # # component = paramak.DivertorBlock( # major_radius = 800, # minor_radius = 400, # triangularity = 1.2, # elongation = 0.9, # thickness = 50, # offset_from_plasma = 20, # start # ) component = paramak.InnerTfCoilsCircular( inner_radius=25, outer_radius=100, number_of_coils=10, gap_size=5, height=300, stp_filename='inner_tf_coils_circular.stp') all_components.append(component) component = paramak.InnerTfCoilsFlat( inner_radius=25, outer_radius=100, number_of_coils=10, gap_size=5, height=300, stp_filename='inner_tf_coils_flat.stp') all_components.append(component) pf_coil = paramak.PoloidalFieldCoil(center_point=(100, 100), height=20, width=20, rotation_angle=rot_angle, stp_filename='poloidal_field_coil.stp') all_components.append(pf_coil) component = paramak.PoloidalFieldCoilCaseFC( pf_coil=pf_coil, casing_thickness=10, rotation_angle=rot_angle, stp_filename='poloidal_field_coil_case_fc.stp') all_components.append(component) component = paramak.PoloidalFieldCoilCase( center_point=(100, 100), coil_height=20, coil_width=20, casing_thickness=10, rotation_angle=rot_angle, stp_filename='poloidal_field_coil_case.stp') all_components.append(component) component = paramak.BlanketConstantThicknessArcV( inner_lower_point=(300, -200), inner_mid_point=(500, 0), inner_upper_point=(300, 200), thickness=100, rotation_angle=rot_angle, stp_filename='blanket_arc_v.stp') all_components.append(component) component = paramak.BlanketConstantThicknessArcH( inner_lower_point=(300, -200), inner_mid_point=(400, 0), inner_upper_point=(300, 200), thickness=100, rotation_angle=rot_angle, stp_filename='blanket_arc_h.stp') all_components.append(component) component = paramak.ToroidalFieldCoilRectangle( inner_upper_point=(100, 700), inner_mid_point=(800, 0), inner_lower_point=(100, -700), thickness=150, distance=60, stp_filename='tf_coil_rectangle.stp', number_of_coils=6) all_components.append(component) component = paramak.ITERtypeDivertor( # default parameters rotation_angle=rot_angle, stp_filename='ITER_type_divertor.stp') all_components.append(component) return all_components