class PrintAPI(object):
def __init__(self, configuration, start_height=0.0):
logger.info('Print API Startup')
self._configuration = configuration
logger.info('Printer Name: %s' % self._configuration.name)
self._controller = None
self._zaxis = None
self._start_height = start_height
self._current_file_name = None
self._current_file = None
if self._configuration.email.on:
self._email_gateway = EmailGateway(self._configuration.email.host, self._configuration.email.port, self._configuration.email.username, self._configuration.email.password)
self._notification_service = EmailNotificationService(self._email_gateway, self._configuration.email.sender, self._configuration.email.recipient)
else:
self._notification_service = None
@property
def configuration(self):
return self._configuration
def print_gcode(self, file_name, print_sub_layers=True, dry_run=False, force_source_speed=False):
self._current_file_name = file_name
self._current_file = open(file_name, 'r')
gcode_reader = GCodeReader(self._current_file, scale=self._configuration.options.scaling_factor, start_height=self._start_height)
gcode_layer_generator = gcode_reader.get_layers()
layer_generator = gcode_layer_generator
self.print_layers(layer_generator, print_sub_layers, dry_run, force_source_speed=force_source_speed)
def _get_zaxis(self, dry_run):
if dry_run:
return None
elif self._configuration.dripper.dripper_type == 'photo':
logger.info("Photo Zaxis")
return PhotoZAxis(
self._start_height,
self._configuration.dripper.photo_zaxis_delay
)
elif self._configuration.dripper.dripper_type == 'emulated':
logger.info("Emulated Zaxis")
return TimedDripZAxis(
self._configuration.dripper.drips_per_mm,
self._start_height,
drips_per_second=self._configuration.dripper.emulated_drips_per_second
)
elif self._configuration.dripper.dripper_type == 'microcontroller':
logger.info("Micro Controller Zaxis")
return SerialDripZAxis(
self._get_communicator(dry_run),
self._configuration.dripper.drips_per_mm,
self._start_height,
)
def _get_communicator(self, dry_run):
if hasattr(self, '_communicator'):
return self._communicator
if dry_run:
self._communicator = NullCommunicator()
else:
self._communicator = UsbPacketCommunicator(self._configuration.circut.print_queue_length)
self._communicator.start()
return self._communicator
def _get_digital_disseminator(self, dry_run):
return MicroDisseminator(
self.laser_control,
self._get_communicator(dry_run),
self._configuration.circut.data_rate
)
def print_layers(self, layer_generator, print_sub_layers=True, dry_run=False, force_source_speed=False):
logger.info("Shuffled: %s" % self._configuration.options.use_shufflelayers)
logger.info("Sublayered: %s" % self._configuration.options.use_sublayers)
logger.info("Overlapped: %s" % self._configuration.options.use_overlap)
if self._configuration.options.use_sublayers and print_sub_layers:
layer_generator = SubLayerGenerator(layer_generator, self._configuration.options.sublayer_height_mm)
if self._configuration.options.use_shufflelayers:
layer_generator = ShuffleGenerator(layer_generator, self._configuration.options.shuffle_layers_amount)
if self._configuration.options.use_overlap:
layer_generator = OverLapGenerator(layer_generator, self._configuration.options.overlap_amount)
if self._configuration.serial.on:
self._commander = SerialCommander(self._configuration.serial.port)
else:
self._commander = NullCommander()
self.laser_control = LaserControl(self._configuration.cure_rate.override_laser_power_amount)
transformer = HomogenousTransformer(
self._configuration.calibration.max_deflection,
self._configuration.calibration.height,
self._configuration.calibration.lower_points,
self._configuration.calibration.upper_points,
)
state = MachineState()
self._status = MachineStatus()
if dry_run:
abort_on_error = False
else:
abort_on_error = True
self._zaxis = self._get_zaxis(dry_run)
disseminator = self._get_digital_disseminator(dry_run)
path_to_points = PathToPoints(
disseminator.samples_per_second,
transformer,
self._configuration.options.laser_thickness_mm
)
if force_source_speed:
override_draw_speed = None
override_move_speed = None
else:
override_draw_speed = self._configuration.cure_rate.draw_speed if self._configuration.cure_rate.use_draw_speed else None
override_move_speed = self._configuration.cure_rate.move_speed if self._configuration.cure_rate.use_draw_speed else None
pre_layer_delay = self._configuration.options.pre_layer_delay if self._configuration.options.pre_layer_delay else 0.0
post_fire_delay_speed = None
slew_delay_speed = None
if self._configuration.options.post_fire_delay:
post_fire_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.post_fire_delay) / 1000.0)
if self._configuration.options.slew_delay:
slew_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.slew_delay) / 1000.0)
if self._configuration.options.wait_after_move_milliseconds > 0:
wait_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.wait_after_move_milliseconds) / 1000.0)
else:
wait_speed = None
self._writer = LayerWriter(
disseminator,
path_to_points,
self.laser_control,
state,
move_distance_to_ignore=self._configuration.options.laser_thickness_mm,
override_draw_speed=override_draw_speed,
override_move_speed=override_move_speed,
wait_speed=wait_speed,
post_fire_delay_speed=post_fire_delay_speed,
slew_delay_speed=slew_delay_speed
)
self._layer_processing = LayerProcessing(
self._writer,
state,
self._status,
self._zaxis,
self._configuration.dripper.max_lead_distance_mm,
self._commander,
pre_layer_delay,
self._configuration.serial.layer_started,
self._configuration.serial.layer_ended,
self._configuration.serial.print_ended,
self._configuration.serial.on_command,
self._configuration.serial.off_command,
)
if self._zaxis:
self._zaxis.set_call_back(self._status.drip_call_back)
self._zaxis.start()
self._controller = Controller(
self._writer,
self._layer_processing,
layer_generator,
self._status,
abort_on_error=abort_on_error,
)
self._controller.start()
def get_status(self):
return self._controller.get_status()
def can_set_drips_per_second(self):
if getattr(self._zaxis, 'set_drips_per_second', False):
return True
else:
return False
def set_drips_per_second(self, drips_per_second):
if getattr(self._zaxis, 'set_drips_per_second', False):
self._zaxis.set_drips_per_second(drips_per_second)
else:
logger.error('Cannot change drips per second on %s' % type(self._zaxis))
raise Exception('Cannot change drips per second on %s' % type(self._zaxis))
def get_drips_per_second(self):
if getattr(self._zaxis, 'get_drips_per_second'):
return self._zaxis.get_drips_per_second()
else:
logger.warning("Drips per second requested but does not exist")
return 0.0
def verify_gcode(self, file_name):
self.print_gcode(file_name, print_sub_layers=False, dry_run=True)
def close(self):
if self._zaxis:
self._zaxis.close()
if self._controller:
self._controller.close()
else:
logger.warning('Stopped before printing')
if self._current_file:
self._current_file.close()
logger.info("File Closed")
if self._notification_service:
self._notification_service.send_message("Print Complete", "%s is complete" % self._current_file_name)
class PrintAPI(object):
def __init__(self, configuration, start_height=0.0):
logger.info('Print API Startup')
self._configuration = configuration
logger.info('Printer Name: %s' % self._configuration.name)
self._controller = None
self._zaxis = None
self._start_height = start_height
self._current_file_name = None
self._current_file = None
if self._configuration.email.on:
self._email_gateway = EmailGateway(
self._configuration.email.host, self._configuration.email.port,
self._configuration.email.username,
self._configuration.email.password)
self._notification_service = EmailNotificationService(
self._email_gateway, self._configuration.email.sender,
self._configuration.email.recipient)
else:
self._notification_service = None
@property
def configuration(self):
return self._configuration
def print_gcode(self,
file_name,
print_sub_layers=True,
dry_run=False,
force_source_speed=False):
self._current_file_name = file_name
self._current_file = open(file_name, 'r')
gcode_reader = GCodeReader(
self._current_file,
scale=self._configuration.options.scaling_factor,
start_height=self._start_height)
gcode_layer_generator = gcode_reader.get_layers()
layer_generator = gcode_layer_generator
self.print_layers(layer_generator,
print_sub_layers,
dry_run,
force_source_speed=force_source_speed)
def _get_zaxis(self, dry_run):
if dry_run:
return None
elif self._configuration.dripper.dripper_type == 'photo':
logger.info("Photo Zaxis")
return PhotoZAxis(self._start_height,
self._configuration.dripper.photo_zaxis_delay)
elif self._configuration.dripper.dripper_type == 'emulated':
logger.info("Emulated Zaxis")
return TimedDripZAxis(self._configuration.dripper.drips_per_mm,
self._start_height,
drips_per_second=self._configuration.dripper.
emulated_drips_per_second)
elif self._configuration.dripper.dripper_type == 'microcontroller':
logger.info("Micro Controller Zaxis")
return SerialDripZAxis(
self._get_communicator(dry_run),
self._configuration.dripper.drips_per_mm,
self._start_height,
)
def _get_communicator(self, dry_run):
if hasattr(self, '_communicator'):
return self._communicator
if dry_run:
self._communicator = NullCommunicator()
else:
self._communicator = UsbPacketCommunicator(
self._configuration.circut.print_queue_length)
self._communicator.start()
return self._communicator
def _get_digital_disseminator(self, dry_run):
return MicroDisseminator(self.laser_control,
self._get_communicator(dry_run),
self._configuration.circut.data_rate)
def print_layers(self,
layer_generator,
print_sub_layers=True,
dry_run=False,
force_source_speed=False):
logger.info("Shuffled: %s" %
self._configuration.options.use_shufflelayers)
logger.info("Sublayered: %s" %
self._configuration.options.use_sublayers)
logger.info("Overlapped: %s" % self._configuration.options.use_overlap)
if self._configuration.options.use_sublayers and print_sub_layers:
layer_generator = SubLayerGenerator(
layer_generator,
self._configuration.options.sublayer_height_mm)
if self._configuration.options.use_shufflelayers:
layer_generator = ShuffleGenerator(
layer_generator,
self._configuration.options.shuffle_layers_amount)
if self._configuration.options.use_overlap:
layer_generator = OverLapGenerator(
layer_generator, self._configuration.options.overlap_amount)
if self._configuration.serial.on:
self._commander = SerialCommander(self._configuration.serial.port)
else:
self._commander = NullCommander()
self.laser_control = LaserControl(
self._configuration.cure_rate.override_laser_power_amount)
transformer = HomogenousTransformer(
self._configuration.calibration.max_deflection,
self._configuration.calibration.height,
self._configuration.calibration.lower_points,
self._configuration.calibration.upper_points,
)
state = MachineState()
self._status = MachineStatus()
if dry_run:
abort_on_error = False
else:
abort_on_error = True
self._zaxis = self._get_zaxis(dry_run)
disseminator = self._get_digital_disseminator(dry_run)
path_to_points = PathToPoints(
disseminator.samples_per_second, transformer,
self._configuration.options.laser_thickness_mm)
if force_source_speed:
override_draw_speed = None
override_move_speed = None
else:
override_draw_speed = self._configuration.cure_rate.draw_speed if self._configuration.cure_rate.use_draw_speed else None
override_move_speed = self._configuration.cure_rate.move_speed if self._configuration.cure_rate.use_draw_speed else None
pre_layer_delay = self._configuration.options.pre_layer_delay if self._configuration.options.pre_layer_delay else 0.0
post_fire_delay_speed = None
slew_delay_speed = None
if self._configuration.options.post_fire_delay:
post_fire_delay_speed = self._configuration.options.laser_thickness_mm / (
float(self._configuration.options.post_fire_delay) / 1000.0)
if self._configuration.options.slew_delay:
slew_delay_speed = self._configuration.options.laser_thickness_mm / (
float(self._configuration.options.slew_delay) / 1000.0)
if self._configuration.options.wait_after_move_milliseconds > 0:
wait_speed = self._configuration.options.laser_thickness_mm / (
float(self._configuration.options.wait_after_move_milliseconds)
/ 1000.0)
else:
wait_speed = None
self._writer = LayerWriter(disseminator,
path_to_points,
self.laser_control,
state,
move_distance_to_ignore=self._configuration.
options.laser_thickness_mm,
override_draw_speed=override_draw_speed,
override_move_speed=override_move_speed,
wait_speed=wait_speed,
post_fire_delay_speed=post_fire_delay_speed,
slew_delay_speed=slew_delay_speed)
self._layer_processing = LayerProcessing(
self._writer,
state,
self._status,
self._zaxis,
self._configuration.dripper.max_lead_distance_mm,
self._commander,
pre_layer_delay,
self._configuration.serial.layer_started,
self._configuration.serial.layer_ended,
self._configuration.serial.print_ended,
self._configuration.serial.on_command,
self._configuration.serial.off_command,
)
if self._zaxis:
self._zaxis.set_call_back(self._status.drip_call_back)
self._zaxis.start()
self._controller = Controller(
self._writer,
self._layer_processing,
layer_generator,
self._status,
abort_on_error=abort_on_error,
)
self._controller.start()
def get_status(self):
return self._controller.get_status()
def can_set_drips_per_second(self):
if getattr(self._zaxis, 'set_drips_per_second', False):
return True
else:
return False
def set_drips_per_second(self, drips_per_second):
if getattr(self._zaxis, 'set_drips_per_second', False):
self._zaxis.set_drips_per_second(drips_per_second)
else:
logger.error('Cannot change drips per second on %s' %
type(self._zaxis))
raise Exception('Cannot change drips per second on %s' %
type(self._zaxis))
def get_drips_per_second(self):
if getattr(self._zaxis, 'get_drips_per_second'):
return self._zaxis.get_drips_per_second()
else:
logger.warning("Drips per second requested but does not exist")
return 0.0
def verify_gcode(self, file_name):
self.print_gcode(file_name, print_sub_layers=False, dry_run=True)
def close(self):
if self._zaxis:
self._zaxis.close()
if self._controller:
self._controller.close()
else:
logger.warning('Stopped before printing')
if self._current_file:
self._current_file.close()
logger.info("File Closed")
if self._notification_service:
self._notification_service.send_message(
"Print Complete", "%s is complete" % self._current_file_name)
def print_layers(self, layer_generator, print_sub_layers=True, dry_run=False, force_source_speed=False):
logger.info("Shuffled: %s" % self._configuration.options.use_shufflelayers)
logger.info("Sublayered: %s" % self._configuration.options.use_sublayers)
logger.info("Overlapped: %s" % self._configuration.options.use_overlap)
if self._configuration.options.use_sublayers and print_sub_layers:
layer_generator = SubLayerGenerator(layer_generator, self._configuration.options.sublayer_height_mm)
if self._configuration.options.use_shufflelayers:
layer_generator = ShuffleGenerator(layer_generator, self._configuration.options.shuffle_layers_amount)
if self._configuration.options.use_overlap:
layer_generator = OverLapGenerator(layer_generator, self._configuration.options.overlap_amount)
if self._configuration.serial.on:
self._commander = SerialCommander(self._configuration.serial.port)
else:
self._commander = NullCommander()
self.laser_control = LaserControl(self._configuration.cure_rate.override_laser_power_amount)
transformer = HomogenousTransformer(
self._configuration.calibration.max_deflection,
self._configuration.calibration.height,
self._configuration.calibration.lower_points,
self._configuration.calibration.upper_points,
)
state = MachineState()
self._status = MachineStatus()
if dry_run:
abort_on_error = False
else:
abort_on_error = True
self._zaxis = self._get_zaxis(dry_run)
disseminator = self._get_digital_disseminator(dry_run)
path_to_points = PathToPoints(
disseminator.samples_per_second,
transformer,
self._configuration.options.laser_thickness_mm
)
if force_source_speed:
override_draw_speed = None
override_move_speed = None
else:
override_draw_speed = self._configuration.cure_rate.draw_speed if self._configuration.cure_rate.use_draw_speed else None
override_move_speed = self._configuration.cure_rate.move_speed if self._configuration.cure_rate.use_draw_speed else None
pre_layer_delay = self._configuration.options.pre_layer_delay if self._configuration.options.pre_layer_delay else 0.0
post_fire_delay_speed = None
slew_delay_speed = None
if self._configuration.options.post_fire_delay:
post_fire_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.post_fire_delay) / 1000.0)
if self._configuration.options.slew_delay:
slew_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.slew_delay) / 1000.0)
if self._configuration.options.wait_after_move_milliseconds > 0:
wait_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.wait_after_move_milliseconds) / 1000.0)
else:
wait_speed = None
self._writer = LayerWriter(
disseminator,
path_to_points,
self.laser_control,
state,
move_distance_to_ignore=self._configuration.options.laser_thickness_mm,
override_draw_speed=override_draw_speed,
override_move_speed=override_move_speed,
wait_speed=wait_speed,
post_fire_delay_speed=post_fire_delay_speed,
slew_delay_speed=slew_delay_speed
)
self._layer_processing = LayerProcessing(
self._writer,
state,
self._status,
self._zaxis,
self._configuration.dripper.max_lead_distance_mm,
self._commander,
pre_layer_delay,
self._configuration.serial.layer_started,
self._configuration.serial.layer_ended,
self._configuration.serial.print_ended,
self._configuration.serial.on_command,
self._configuration.serial.off_command,
)
if self._zaxis:
self._zaxis.set_call_back(self._status.drip_call_back)
self._zaxis.start()
self._controller = Controller(
self._writer,
self._layer_processing,
layer_generator,
self._status,
abort_on_error=abort_on_error,
)
self._controller.start()
class PrintAPI(object):
'''API designed to use configuration to print a thing takes a configuration object
Simple Usage:
print_api = PrintAPI(configuration_api.get_current_config())
print_api.print_gcode("file.gcode")
while print_api.get_status()['status'] != "Complete"
time.sleep(1)
print_api.close()
'''
def __init__(self, configuration, start_height=0.0):
logger.info('Print API Startup')
self._configuration = configuration
logger.info('Printer Name: %s' % self._configuration.name)
self._controller = None
self._zaxis = None
self._start_height = start_height
self._current_file_name = None
self._current_file = None
if self._configuration.email.on:
self._email_gateway = EmailGateway(
self._configuration.email.host, self._configuration.email.port,
self._configuration.email.username,
self._configuration.email.password)
self._notification_service = EmailNotificationService(
self._email_gateway, self._configuration.email.sender,
self._configuration.email.recipient)
else:
self._notification_service = None
@property
def configuration(self):
'''Returns the current configuration'''
return self._configuration
def print_gcode(self,
file_name,
print_sub_layers=True,
dry_run=False,
force_source_speed=False):
'''Take a gcode file and starts the printing it with current settings.'''
self._current_file_name = file_name
self._current_file = open(file_name, 'r')
gcode_reader = GCodeReader(
self._current_file,
scale=self._configuration.options.scaling_factor,
start_height=self._start_height)
gcode_layer_generator = gcode_reader.get_layers()
layer_generator = gcode_layer_generator
self.print_layers(layer_generator,
print_sub_layers,
dry_run,
force_source_speed=force_source_speed)
def subscribe_to_status(self, callback):
'''Allows a subscription to printer safety status messages'''
if hasattr(self, '_communicator'):
self._communicator.register_handler(PrinterStatusMessage, callback)
else:
logger.warning("Printer not running subscription not complete")
def _get_zaxis(self, dry_run):
if dry_run:
return None
elif self._configuration.dripper.dripper_type == 'photo':
logger.info("Photo Zaxis")
return PhotoZAxis(self._start_height,
self._configuration.dripper.photo_zaxis_delay)
elif self._configuration.dripper.dripper_type == 'emulated':
logger.info("Emulated Zaxis")
return TimedDripZAxis(self._configuration.dripper.drips_per_mm,
self._start_height,
drips_per_second=self._configuration.dripper.
emulated_drips_per_second)
elif self._configuration.dripper.dripper_type == 'microcontroller':
logger.info("Micro Controller Zaxis")
return SerialDripZAxis(
self._get_communicator(dry_run),
self._configuration.dripper.drips_per_mm,
self._start_height,
)
def _get_communicator(self, dry_run):
if hasattr(self, '_communicator'):
return self._communicator
if dry_run:
self._communicator = NullCommunicator()
else:
self._communicator = UsbPacketCommunicator(
self._configuration.circut.print_queue_length)
self._communicator.start()
return self._communicator
def _get_digital_disseminator(self, dry_run):
return MicroDisseminator(self.laser_control,
self._get_communicator(dry_run),
self._configuration.circut.data_rate)
def print_layers(self,
layer_generator,
print_sub_layers=True,
dry_run=False,
force_source_speed=False):
'''Takes a layer_generator object and starts the printing it with current settings.'''
logger.info("Shuffled: %s" %
self._configuration.options.use_shufflelayers)
logger.info("Sublayered: %s" %
self._configuration.options.use_sublayers)
logger.info("Overlapped: %s" % self._configuration.options.use_overlap)
if self._configuration.options.use_sublayers and print_sub_layers:
layer_generator = SubLayerGenerator(
layer_generator,
self._configuration.options.sublayer_height_mm)
if self._configuration.options.use_shufflelayers:
layer_generator = ShuffleGenerator(
layer_generator,
self._configuration.options.shuffle_layers_amount)
if self._configuration.options.use_overlap:
layer_generator = OverLapGenerator(
layer_generator, self._configuration.options.overlap_amount)
if self._configuration.serial.on:
self._commander = SerialCommander(self._configuration.serial.port)
else:
self._commander = NullCommander()
self.laser_control = LaserControl(
self._configuration.cure_rate.override_laser_power_amount)
transformer = HomogenousTransformer(
self._configuration.calibration.max_deflection,
self._configuration.calibration.height,
self._configuration.calibration.lower_points,
self._configuration.calibration.upper_points,
)
state = MachineState()
self._status = MachineStatus()
if dry_run:
abort_on_error = False
else:
abort_on_error = True
self._zaxis = self._get_zaxis(dry_run)
disseminator = self._get_digital_disseminator(dry_run)
path_to_points = PathToPoints(
disseminator.samples_per_second, transformer,
self._configuration.options.laser_thickness_mm)
if force_source_speed:
override_draw_speed = None
override_move_speed = None
else:
override_draw_speed = self._configuration.cure_rate.draw_speed if self._configuration.cure_rate.use_draw_speed else None
override_move_speed = self._configuration.cure_rate.move_speed if self._configuration.cure_rate.use_draw_speed else None
pre_layer_delay = self._configuration.options.pre_layer_delay if self._configuration.options.pre_layer_delay else 0.0
post_fire_delay_speed = None
slew_delay_speed = None
if self._configuration.options.post_fire_delay:
post_fire_delay_speed = self._configuration.options.laser_thickness_mm / (
float(self._configuration.options.post_fire_delay) / 1000.0)
if self._configuration.options.slew_delay:
slew_delay_speed = self._configuration.options.laser_thickness_mm / (
float(self._configuration.options.slew_delay) / 1000.0)
if self._configuration.options.wait_after_move_milliseconds > 0:
wait_speed = self._configuration.options.laser_thickness_mm / (
float(self._configuration.options.wait_after_move_milliseconds)
/ 1000.0)
else:
wait_speed = None
self._writer = LayerWriter(disseminator,
path_to_points,
self.laser_control,
state,
move_distance_to_ignore=self._configuration.
options.laser_thickness_mm,
override_draw_speed=override_draw_speed,
override_move_speed=override_move_speed,
wait_speed=wait_speed,
post_fire_delay_speed=post_fire_delay_speed,
slew_delay_speed=slew_delay_speed)
self._layer_processing = LayerProcessing(
self._writer,
state,
self._status,
zaxis=self._zaxis,
max_lead_distance=self._configuration.dripper.max_lead_distance_mm,
commander=self._commander,
pre_layer_delay=pre_layer_delay,
layer_start_command=self._configuration.serial.layer_started,
layer_ended_command=self._configuration.serial.layer_ended,
print_start_command=self._configuration.serial.print_start,
print_ended_command=self._configuration.serial.print_ended,
dripper_on_command=self._configuration.serial.on_command,
dripper_off_command=self._configuration.serial.off_command,
)
if self._zaxis:
self._zaxis.set_call_back(self._status.drip_call_back)
self._zaxis.start()
self._controller = Controller(
self._writer,
self._layer_processing,
layer_generator,
self._status,
abort_on_error=abort_on_error,
)
self._controller.start()
def get_status(self):
'''Returns a status dictionary of the print containing:
start_time
elapsed_time
current_layer
status -> ['Complete', 'Cancelled', 'Failed', 'Starting', 'Running']
errors
waiting_for_drips
height
drips
drips_per_second
model_height
skipped_layers
drip_histor
'''
return self._controller.get_status()
def can_set_drips_per_second(self):
'''When using an emulated dripper this returns if the use can cahnge the drip rate manually via software'''
if getattr(self._zaxis, 'set_drips_per_second', False):
return True
else:
return False
def set_drips_per_second(self, drips_per_second):
'''Allows a user to set the number of drips per second in realtime whilst using the emulated dripper'''
if getattr(self._zaxis, 'set_drips_per_second', False):
self._zaxis.set_drips_per_second(drips_per_second)
else:
logger.error('Cannot change drips per second on %s' %
type(self._zaxis))
raise Exception('Cannot change drips per second on %s' %
type(self._zaxis))
def get_drips_per_second(self):
'''Gets the current setting for drips per second when using the emulated dripper'''
if getattr(self._zaxis, 'get_drips_per_second'):
return self._zaxis.get_drips_per_second()
else:
logger.warning("Drips per second requested but does not exist")
return 0.0
def verify_gcode(self, file_name):
'''Runs a test of the gcode without printing to verify file intregrity ununsed at this time'''
self.print_gcode(file_name, print_sub_layers=False, dry_run=True)
def close(self):
'''Close the api required before running a second print or shutting down'''
if self._zaxis:
self._zaxis.close()
if self._controller:
self._controller.close()
else:
logger.warning('Stopped before printing')
if self._current_file:
self._current_file.close()
logger.info("File Closed")
if self._notification_service:
self._notification_service.send_message(
"Print Complete", "%s is complete" % self._current_file_name)
def print_layers(self,
layer_generator,
print_sub_layers=True,
dry_run=False,
force_source_speed=False):
logger.info("Shuffled: %s" %
self._configuration.options.use_shufflelayers)
logger.info("Sublayered: %s" %
self._configuration.options.use_sublayers)
logger.info("Overlapped: %s" % self._configuration.options.use_overlap)
if self._configuration.options.use_sublayers and print_sub_layers:
layer_generator = SubLayerGenerator(
layer_generator,
self._configuration.options.sublayer_height_mm)
if self._configuration.options.use_shufflelayers:
layer_generator = ShuffleGenerator(
layer_generator,
self._configuration.options.shuffle_layers_amount)
if self._configuration.options.use_overlap:
layer_generator = OverLapGenerator(
layer_generator, self._configuration.options.overlap_amount)
if self._configuration.serial.on:
self._commander = SerialCommander(self._configuration.serial.port)
else:
self._commander = NullCommander()
self.laser_control = LaserControl(
self._configuration.cure_rate.override_laser_power_amount)
transformer = HomogenousTransformer(
self._configuration.calibration.max_deflection,
self._configuration.calibration.height,
self._configuration.calibration.lower_points,
self._configuration.calibration.upper_points,
)
state = MachineState()
self._status = MachineStatus()
if dry_run:
abort_on_error = False
else:
abort_on_error = True
self._zaxis = self._get_zaxis(dry_run)
disseminator = self._get_digital_disseminator(dry_run)
path_to_points = PathToPoints(
disseminator.samples_per_second, transformer,
self._configuration.options.laser_thickness_mm)
if force_source_speed:
override_draw_speed = None
override_move_speed = None
else:
override_draw_speed = self._configuration.cure_rate.draw_speed if self._configuration.cure_rate.use_draw_speed else None
override_move_speed = self._configuration.cure_rate.move_speed if self._configuration.cure_rate.use_draw_speed else None
pre_layer_delay = self._configuration.options.pre_layer_delay if self._configuration.options.pre_layer_delay else 0.0
post_fire_delay_speed = None
slew_delay_speed = None
if self._configuration.options.post_fire_delay:
post_fire_delay_speed = self._configuration.options.laser_thickness_mm / (
float(self._configuration.options.post_fire_delay) / 1000.0)
if self._configuration.options.slew_delay:
slew_delay_speed = self._configuration.options.laser_thickness_mm / (
float(self._configuration.options.slew_delay) / 1000.0)
if self._configuration.options.wait_after_move_milliseconds > 0:
wait_speed = self._configuration.options.laser_thickness_mm / (
float(self._configuration.options.wait_after_move_milliseconds)
/ 1000.0)
else:
wait_speed = None
self._writer = LayerWriter(disseminator,
path_to_points,
self.laser_control,
state,
move_distance_to_ignore=self._configuration.
options.laser_thickness_mm,
override_draw_speed=override_draw_speed,
override_move_speed=override_move_speed,
wait_speed=wait_speed,
post_fire_delay_speed=post_fire_delay_speed,
slew_delay_speed=slew_delay_speed)
self._layer_processing = LayerProcessing(
self._writer,
state,
self._status,
self._zaxis,
self._configuration.dripper.max_lead_distance_mm,
self._commander,
pre_layer_delay,
self._configuration.serial.layer_started,
self._configuration.serial.layer_ended,
self._configuration.serial.print_ended,
self._configuration.serial.on_command,
self._configuration.serial.off_command,
)
if self._zaxis:
self._zaxis.set_call_back(self._status.drip_call_back)
self._zaxis.start()
self._controller = Controller(
self._writer,
self._layer_processing,
layer_generator,
self._status,
abort_on_error=abort_on_error,
)
self._controller.start()
def __init__(self, configuration_manager):
logger.info("Calibartion API Startup")
self._configuration_manager = configuration_manager
self._configuration = self._configuration_manager.load()
self._point_generator = SinglePointGenerator()
self._blink_generator = BlinkGenerator()
self._orientaiton_generator = OrientationGenerator()
self._alignment_generator = CalibrationLineGenerator()
self._scale_generator = ScaleGenerator(speed=2.0, radius=1.0)
self._test_patterns = {
'Hilbert Space Filling Curve': HilbertGenerator(),
'Square': SquareGenerator(),
'Circle': CircleGenerator(),
'Spiral': SpiralGenerator(),
'Memory Hourglass': MemoryHourglassGenerator(),
'Damping Test': DampingTestGenerator(),
'NESW': NESWGenerator(),
'Twitch': TwitchGenerator(),
}
self._current_generator = self._point_generator
self._laser_control = LaserControl(self._configuration.cure_rate.override_laser_power_amount)
transformer = TuningTransformer(scale=self._configuration.calibration.max_deflection)
self._controller = None
logger.debug("Setting up audiowriter")
self._current_generator = self._point_generator
self._state = MachineState()
self._status = MachineStatus()
self._communicator = UsbPacketCommunicator(self._configuration.circut.calibration_queue_length)
self._communicator.start()
self._disseminator = MicroDisseminator(
self._laser_control,
self._communicator,
self._configuration.circut.data_rate
)
self._path_to_points = PathToPoints(
self._disseminator.samples_per_second,
transformer,
self._configuration.options.laser_thickness_mm
)
post_fire_delay_speed = None
slew_delay_speed = None
if self._configuration.options.post_fire_delay:
post_fire_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.post_fire_delay) / 1000.0)
if self._configuration.options.slew_delay:
slew_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.slew_delay) / 1000.0)
self._writer = LayerWriter(
self._disseminator,
self._path_to_points,
self._laser_control,
self._state,
post_fire_delay_speed=post_fire_delay_speed,
slew_delay_speed=slew_delay_speed
)
self._layer_processing = LayerProcessing(
self._writer,
self._state,
self._status,
)
self._controller = Controller(
self._writer,
self._layer_processing,
self._current_generator,
self._status,
abort_on_error=False,
)
self.make_pattern_fit()
self._controller.start()
class CalibrationAPI(object):
'''The calibration API proivides the tools required to setup a Peacy Printer'''
def __init__(self, configuration_manager):
logger.info("Calibartion API Startup")
self._configuration_manager = configuration_manager
self._configuration = self._configuration_manager.load()
self._point_generator = SinglePointGenerator()
self._blink_generator = BlinkGenerator()
self._orientaiton_generator = OrientationGenerator()
self._alignment_generator = CalibrationLineGenerator()
self._scale_generator = ScaleGenerator(speed=2.0, radius=1.0)
self._test_patterns = {
'Hilbert Space Filling Curve': HilbertGenerator(),
'Square': SquareGenerator(),
'Circle': CircleGenerator(),
'Spiral': SpiralGenerator(),
'Memory Hourglass': MemoryHourglassGenerator(),
'Damping Test': DampingTestGenerator(),
'NESW': NESWGenerator(),
'Twitch': TwitchGenerator(),
}
self._current_generator = self._point_generator
self._laser_control = LaserControl(self._configuration.cure_rate.override_laser_power_amount)
transformer = TuningTransformer(scale=self._configuration.calibration.max_deflection)
self._controller = None
logger.debug("Setting up audiowriter")
self._current_generator = self._point_generator
self._state = MachineState()
self._status = MachineStatus()
self._communicator = UsbPacketCommunicator(self._configuration.circut.calibration_queue_length)
self._communicator.start()
self._disseminator = MicroDisseminator(
self._laser_control,
self._communicator,
self._configuration.circut.data_rate
)
self._path_to_points = PathToPoints(
self._disseminator.samples_per_second,
transformer,
self._configuration.options.laser_thickness_mm
)
post_fire_delay_speed = None
slew_delay_speed = None
if self._configuration.options.post_fire_delay:
post_fire_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.post_fire_delay) / 1000.0)
if self._configuration.options.slew_delay:
slew_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.slew_delay) / 1000.0)
self._writer = LayerWriter(
self._disseminator,
self._path_to_points,
self._laser_control,
self._state,
post_fire_delay_speed=post_fire_delay_speed,
slew_delay_speed=slew_delay_speed
)
self._layer_processing = LayerProcessing(
self._writer,
self._state,
self._status,
)
self._controller = Controller(
self._writer,
self._layer_processing,
self._current_generator,
self._status,
abort_on_error=False,
)
self.make_pattern_fit()
self._controller.start()
def subscribe_to_status(self, callback):
'''Provides ability to subscribe to a printer safety status message (PrinterStatusMessage)'''
self._communicator.register_handler(PrinterStatusMessage, callback)
def set_print_area(self, width, height, depth):
'''Set the print area (width, height, depth) in mm'''
self._configuration.calibration.print_area_x = width
self._configuration.calibration.print_area_y = height
self._configuration.calibration.print_area_z = depth
self._save()
def get_print_area(self):
'''Gets the print area (width, height, depth) in mm'''
return (self._configuration.calibration.print_area_x, self._configuration.calibration.print_area_y, self._configuration.calibration.print_area_z)
def set_orientation(self, x_flip, yflip, swap_axis):
'''Allows for compensation of coil hook up by flipping and reversing axis'''
self._configuration.calibration.flip_x_axis = x_flip
self._configuration.calibration.flip_y_axis = yflip
self._configuration.calibration.swap_axis = swap_axis
self._save()
def get_orientation(self):
'''Gets the compensation for coil hook up returns tuple3 of booleans (flip x axis, flip y axis, swap axis) '''
return (self._configuration.calibration.flip_x_axis, self._configuration.calibration.flip_y_axis, self._configuration.calibration.swap_axis)
def show_point(self, xyz=[0.5, 0.5, 0.5]):
'''Used to show a single point with no calibration applied'''
# logger.info('Showing point')
x, y, z = xyz
self._point_generator.xy = [x, y]
if (self._current_generator != self._point_generator):
self._unapply_calibration()
self._update_generator(self._point_generator)
def show_blink(self, xyz=[0.5, 0.5, 0.0]):
'''Used to show a blinking point with no calibration applied used for aligning on and off laser posisition'''
logger.info('Showing blink')
x, y, z = xyz
self._blink_generator.xy = [x, y]
if (self._current_generator != self._blink_generator):
self._unapply_calibration()
self._update_generator(self._blink_generator)
def show_orientation(self):
'''Used to show pattern with no calibration applied used for determining orientation'''
logger.info('Showing Orientation')
if (self._current_generator != self._orientaiton_generator):
self._unapply_calibration()
self._update_generator(self._orientaiton_generator)
def show_line(self):
'''Used to show a single line on one axis used to line up calibration grid'''
logger.info('Showing line')
self._unapply_calibration()
self._update_generator(self._alignment_generator)
def show_test_pattern(self, pattern):
'''Used to show a test pattern with calibration applied'''
logger.info('Showing test pattern %s' % pattern)
if pattern in self._test_patterns.keys():
self._apply_calibration()
self._update_generator(self._test_patterns[pattern])
else:
logger.error('Pattern: %s does not exist' % pattern)
raise Exception('Pattern: %s does not exist' % pattern)
def show_scale(self):
'''Shows the scale square'''
logger.info('Showing scale')
self._unapply_calibration()
self._update_generator(self._scale_generator)
def get_max_deflection(self):
'''Gets the maximum allowable deflection of the mirrors as percentage'''
return self._configuration.calibration.max_deflection
def set_max_deflection(self, deflection):
'''Sets the maximum allowable deflection of the mirrors as percentage'''
self._configuration.calibration.max_deflection = deflection
self._unapply_calibration()
self._save()
def set_laser_off_override(self, state):
'''Allows user so force the laser on'''
self._controller.laser_off_override = state
def set_test_pattern_speed(self, speed):
'''Changes the speed at which the test pattern is drawn in mm/sec'''
[pattern.set_speed(speed) for pattern in self._test_patterns.values()]
def set_test_pattern_current_height(self, current_height):
'''Changes the height at which the test pattern is drawn in mm'''
[pattern.set_current_height(current_height) for pattern in self._test_patterns.values()]
def get_test_patterns(self):
'''returns a list of test patterns'''
return self._test_patterns.keys()
def current_calibration(self):
'''Returns the current calibration for the printer'''
return self._configuration.calibration
def save_points(self, height, lower_points, upper_points):
'''deprecated use set_lower_points and set_upper_points, set_height'''
self.set_lower_points(lower_points)
self.set_upper_points(upper_points)
self.set_height(height)
def get_lower_points(self):
'''Gets the lower calibration points'''
return self._configuration.calibration.lower_points
def set_lower_points(self, lower_points):
'''Set and saves the suppliled lower calibration'''
self._configuration.calibration.lower_points = lower_points
self._save()
def get_upper_points(self):
'''Gets the upper calibration points'''
return self._configuration.calibration.upper_points
def set_upper_points(self, upper_points):
'''Set and saves the suppliled upper calibration'''
self._configuration.calibration.upper_points = upper_points
self._save()
def get_height(self):
'''Gets the calibration height'''
return self._configuration.calibration.height
def set_height(self, height):
'''Set and saves the upper calibration height'''
self._configuration.calibration.height = height
self._save()
def _save(self):
self._configuration_manager.save(self._configuration)
self.make_pattern_fit()
# deprecated
def make_pattern_fit(self):
for pattern in self._test_patterns.values():
pattern.set_radius(self.get_largest_object_radius())
def close(self):
'''Must be called before shutting down applications'''
self._controller.close()
def _update_generator(self, generator):
self._current_generator = generator
self._controller.change_generator(self._current_generator)
def _apply_calibration(self):
self._path_to_points.set_transformer(
HomogenousTransformer(
self._configuration.calibration.max_deflection,
self._configuration.calibration.height,
self._configuration.calibration.lower_points,
self._configuration.calibration.upper_points
)
)
def _unapply_calibration(self):
self._path_to_points.set_transformer(
TuningTransformer(scale=self._configuration.calibration.max_deflection))
def _validate_points(self, points):
if (len(points) != 4):
return False
return True
def get_largest_object_radius(self):
'''Based on current calibrations_gets_maximum_size_of_object at the base layer'''
lowest = None
for (x, y) in self._configuration.calibration.lower_points.values():
if not lowest or abs(x) < lowest:
lowest = abs(x)
if abs(y) < lowest:
lowest = abs(y)
logger.info("Calulated max radius of object as: %s mm" % lowest)
return lowest
def stop(self):
'''Stops the calibaration interactivity'''
self._controller.stop()
def __init__(self, configuration_manager):
logger.info("Calibartion API Startup")
self._configuration_manager = configuration_manager
self._configuration = self._configuration_manager.load()
self._point_generator = SinglePointGenerator()
self._blink_generator = BlinkGenerator()
self._orientaiton_generator = OrientationGenerator()
self._alignment_generator = CalibrationLineGenerator()
self._scale_generator = ScaleGenerator(speed=2.0, radius=1.0)
self._test_patterns = {
'Hilbert Space Filling Curve': HilbertGenerator(),
'Square': SquareGenerator(),
'Circle': CircleGenerator(),
'Spiral': SpiralGenerator(),
'Memory Hourglass': MemoryHourglassGenerator(),
'Damping Test': DampingTestGenerator(),
'NESW': NESWGenerator(),
'Twitch': TwitchGenerator(),
}
self._current_generator = self._point_generator
self._laser_control = LaserControl(self._configuration.cure_rate.override_laser_power_amount)
transformer = TuningTransformer(scale=self._configuration.calibration.max_deflection)
self._controller = None
logger.debug("Setting up audiowriter")
self._current_generator = self._point_generator
self._state = MachineState()
self._status = MachineStatus()
self._communicator = UsbPacketCommunicator(self._configuration.circut.calibration_queue_length)
self._communicator.start()
self._disseminator = MicroDisseminator(
self._laser_control,
self._communicator,
self._configuration.circut.data_rate
)
self._path_to_points = PathToPoints(
self._disseminator.samples_per_second,
transformer,
self._configuration.options.laser_thickness_mm
)
post_fire_delay_speed = None
slew_delay_speed = None
if self._configuration.options.post_fire_delay:
post_fire_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.post_fire_delay) / 1000.0)
if self._configuration.options.slew_delay:
slew_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.slew_delay) / 1000.0)
self._writer = LayerWriter(
self._disseminator,
self._path_to_points,
self._laser_control,
self._state,
post_fire_delay_speed=post_fire_delay_speed,
slew_delay_speed=slew_delay_speed
)
self._layer_processing = LayerProcessing(
self._writer,
self._state,
self._status,
)
self._controller = Controller(
self._writer,
self._layer_processing,
self._current_generator,
self._status,
abort_on_error=False,
)
self.make_pattern_fit()
self._controller.start()
class CalibrationAPI(object):
def __init__(self, configuration_manager):
logger.info("Calibartion API Startup")
self._configuration_manager = configuration_manager
self._configuration = self._configuration_manager.load()
self._point_generator = SinglePointGenerator()
self._blink_generator = BlinkGenerator()
self._orientaiton_generator = OrientationGenerator()
self._alignment_generator = CalibrationLineGenerator()
self._scale_generator = ScaleGenerator(speed=2.0, radius=1.0)
self._test_patterns = {
'Hilbert Space Filling Curve': HilbertGenerator(),
'Square': SquareGenerator(),
'Circle': CircleGenerator(),
'Spiral': SpiralGenerator(),
'Memory Hourglass': MemoryHourglassGenerator(),
'Damping Test': DampingTestGenerator(),
'NESW': NESWGenerator(),
'Twitch': TwitchGenerator(),
}
self._current_generator = self._point_generator
self._laser_control = LaserControl(self._configuration.cure_rate.override_laser_power_amount)
transformer = TuningTransformer(scale=self._configuration.calibration.max_deflection)
self._controller = None
logger.debug("Setting up audiowriter")
self._current_generator = self._point_generator
self._state = MachineState()
self._status = MachineStatus()
self._communicator = UsbPacketCommunicator(self._configuration.circut.calibration_queue_length)
self._communicator.start()
self._disseminator = MicroDisseminator(
self._laser_control,
self._communicator,
self._configuration.circut.data_rate
)
self._path_to_points = PathToPoints(
self._disseminator.samples_per_second,
transformer,
self._configuration.options.laser_thickness_mm
)
post_fire_delay_speed = None
slew_delay_speed = None
if self._configuration.options.post_fire_delay:
post_fire_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.post_fire_delay) / 1000.0)
if self._configuration.options.slew_delay:
slew_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.slew_delay) / 1000.0)
self._writer = LayerWriter(
self._disseminator,
self._path_to_points,
self._laser_control,
self._state,
post_fire_delay_speed=post_fire_delay_speed,
slew_delay_speed=slew_delay_speed
)
self._layer_processing = LayerProcessing(
self._writer,
self._state,
self._status,
)
self._controller = Controller(
self._writer,
self._layer_processing,
self._current_generator,
self._status,
abort_on_error=False,
)
self.make_pattern_fit()
self._controller.start()
def set_print_area(self, width, height, depth):
self._configuration.calibration.print_area_x = width
self._configuration.calibration.print_area_y = height
self._configuration.calibration.print_area_z = depth
self._save()
def get_print_area(self):
return (self._configuration.calibration.print_area_x, self._configuration.calibration.print_area_y, self._configuration.calibration.print_area_z)
def set_orientation(self, x_flip, yflip, swap_axis):
self._configuration.calibration.flip_x_axis = x_flip
self._configuration.calibration.flip_y_axis = yflip
self._configuration.calibration.swap_axis = swap_axis
self._save()
def get_orientation(self):
return (self._configuration.calibration.flip_x_axis, self._configuration.calibration.flip_y_axis, self._configuration.calibration.swap_axis)
'''Used to show a single point with no calibration applied'''
def show_point(self, xyz=[0.5, 0.5, 0.5]):
# logger.info('Showing point')
x, y, z = xyz
self._point_generator.xy = [x, y]
if (self._current_generator != self._point_generator):
self._unapply_calibration()
self._update_generator(self._point_generator)
'''Used to show a blinking point with no calibration applied used for aligning on and off laser posisition'''
def show_blink(self, xyz=[0.5, 0.5, 0.0]):
logger.info('Showing blink')
x, y, z = xyz
self._blink_generator.xy = [x, y]
if (self._current_generator != self._blink_generator):
self._unapply_calibration()
self._update_generator(self._blink_generator)
'''Used to show pattern with no calibration applied used for determining orientation'''
def show_orientation(self):
logger.info('Showing Orientation')
if (self._current_generator != self._orientaiton_generator):
self._unapply_calibration()
self._update_generator(self._orientaiton_generator)
'''Used to show a single line on one axis used to line up calibration grid'''
def show_line(self):
logger.info('Showing line')
self._unapply_calibration()
self._update_generator(self._alignment_generator)
'''Used to show a test pattern with calibration applied'''
def show_test_pattern(self, pattern):
logger.info('Showing test pattern %s' % pattern)
if pattern in self._test_patterns.keys():
self._apply_calibration()
self._update_generator(self._test_patterns[pattern])
else:
logger.error('Pattern: %s does not exist' % pattern)
raise Exception('Pattern: %s does not exist' % pattern)
'''Shows the scale square'''
def show_scale(self):
logger.info('Showing scale')
self._unapply_calibration()
self._update_generator(self._scale_generator)
def get_max_deflection(self):
return self._configuration.calibration.max_deflection
def set_max_deflection(self, deflection):
self._configuration.calibration.max_deflection = deflection
self._unapply_calibration()
self._save()
'''Allows user so force the laser on'''
def set_laser_off_override(self, state):
self._controller.laser_off_override = state
'''Changes the speed at which the test pattern is drawn in mm/sec'''
def set_test_pattern_speed(self, speed):
[pattern.set_speed(speed) for pattern in self._test_patterns.values()]
'''Changes the height at which the test pattern is drawn in mm'''
def set_test_pattern_current_height(self, current_height):
[pattern.set_current_height(current_height) for pattern in self._test_patterns.values()]
'''returns a list of test patterns'''
def get_test_patterns(self):
return self._test_patterns.keys()
'''Returns the current calibration for the printer'''
def current_calibration(self):
return self._configuration.calibration
'''deprecated use set_lower_points and set_upper_points, set_height'''
def save_points(self, height, lower_points, upper_points):
self.set_lower_points(lower_points)
self.set_upper_points(upper_points)
self.set_height(height)
'''Gets the lower calibration points'''
def get_lower_points(self):
return self._configuration.calibration.lower_points
'''Set and saves the suppliled lower calibration'''
def set_lower_points(self, lower_points):
self._configuration.calibration.lower_points = lower_points
self._save()
'''Gets the upper calibration points'''
def get_upper_points(self):
return self._configuration.calibration.upper_points
'''Set and saves the suppliled upper calibration'''
def set_upper_points(self, upper_points):
self._configuration.calibration.upper_points = upper_points
self._save()
'''Gets the calibration height'''
def get_height(self):
return self._configuration.calibration.height
'''Set and saves the upper calibration height'''
def set_height(self, height):
self._configuration.calibration.height = height
self._save()
def _save(self):
self._configuration_manager.save(self._configuration)
self.make_pattern_fit()
# deprecated
def make_pattern_fit(self):
for pattern in self._test_patterns.values():
pattern.set_radius(self.get_largest_object_radius())
'''Must be called before shutting down applications'''
def close(self):
self._controller.close()
def _update_generator(self, generator):
self._current_generator = generator
self._controller.change_generator(self._current_generator)
def _apply_calibration(self):
self._path_to_points.set_transformer(
HomogenousTransformer(
self._configuration.calibration.max_deflection,
self._configuration.calibration.height,
self._configuration.calibration.lower_points,
self._configuration.calibration.upper_points
)
)
def _unapply_calibration(self):
self._path_to_points.set_transformer(
TuningTransformer(scale=self._configuration.calibration.max_deflection))
def _validate_points(self, points):
if (len(points) != 4):
return False
return True
'''Based on current calibrations_gets_maximum_size_of_object at the base layer'''
def get_largest_object_radius(self):
lowest = None
for (x, y) in self._configuration.calibration.lower_points.values():
if not lowest or abs(x) < lowest:
lowest = abs(x)
if abs(y) < lowest:
lowest = abs(y)
logger.info("Calulated max radius of object as: %s mm" % lowest)
return lowest
def stop(self):
self._controller.stop()
class PrintAPI(object):
'''API designed to use configuration to print a thing takes a configuration object
Simple Usage:
print_api = PrintAPI(configuration_api.get_current_config())
print_api.print_gcode("file.gcode")
while print_api.get_status()['status'] != "Complete"
time.sleep(1)
print_api.close()
'''
def __init__(self, configuration, start_height=0.0):
logger.info('Print API Startup')
self._configuration = configuration
logger.info('Printer Name: %s' % self._configuration.name)
self._controller = None
self._zaxis = None
self._start_height = start_height
self._current_file_name = None
self._current_file = None
if self._configuration.email.on:
self._email_gateway = EmailGateway(self._configuration.email.host, self._configuration.email.port, self._configuration.email.username, self._configuration.email.password)
self._notification_service = EmailNotificationService(self._email_gateway, self._configuration.email.sender, self._configuration.email.recipient)
else:
self._notification_service = None
@property
def configuration(self):
'''Returns the current configuration'''
return self._configuration
def print_gcode(self, file_name, print_sub_layers=True, dry_run=False, force_source_speed=False):
'''Take a gcode file and starts the printing it with current settings.'''
self._current_file_name = file_name
self._current_file = open(file_name, 'r')
gcode_reader = GCodeReader(self._current_file, scale=self._configuration.options.scaling_factor, start_height=self._start_height)
gcode_layer_generator = gcode_reader.get_layers()
layer_generator = gcode_layer_generator
self.print_layers(layer_generator, print_sub_layers, dry_run, force_source_speed=force_source_speed)
def subscribe_to_status(self, callback):
'''Allows a subscription to printer safety status messages'''
if hasattr(self, '_communicator'):
self._communicator.register_handler(PrinterStatusMessage, callback)
else:
logger.warning("Printer not running subscription not complete")
def _get_zaxis(self, dry_run):
if dry_run:
return None
elif self._configuration.dripper.dripper_type == 'photo':
logger.info("Photo Zaxis")
return PhotoZAxis(
self._start_height,
self._configuration.dripper.photo_zaxis_delay
)
elif self._configuration.dripper.dripper_type == 'emulated':
logger.info("Emulated Zaxis")
return TimedDripZAxis(
self._configuration.dripper.drips_per_mm,
self._start_height,
drips_per_second=self._configuration.dripper.emulated_drips_per_second
)
elif self._configuration.dripper.dripper_type == 'microcontroller':
logger.info("Micro Controller Zaxis")
return SerialDripZAxis(
self._get_communicator(dry_run),
self._configuration.dripper.drips_per_mm,
self._start_height,
)
def _get_communicator(self, dry_run):
if hasattr(self, '_communicator'):
return self._communicator
if dry_run:
self._communicator = NullCommunicator()
else:
self._communicator = UsbPacketCommunicator(self._configuration.circut.print_queue_length)
self._communicator.start()
return self._communicator
def _get_digital_disseminator(self, dry_run):
return MicroDisseminator(
self.laser_control,
self._get_communicator(dry_run),
self._configuration.circut.data_rate
)
def print_layers(self, layer_generator, print_sub_layers=True, dry_run=False, force_source_speed=False):
'''Takes a layer_generator object and starts the printing it with current settings.'''
logger.info("Shuffled: %s" % self._configuration.options.use_shufflelayers)
logger.info("Sublayered: %s" % self._configuration.options.use_sublayers)
logger.info("Overlapped: %s" % self._configuration.options.use_overlap)
if self._configuration.options.use_sublayers and print_sub_layers:
layer_generator = SubLayerGenerator(layer_generator, self._configuration.options.sublayer_height_mm)
if self._configuration.options.use_shufflelayers:
layer_generator = ShuffleGenerator(layer_generator, self._configuration.options.shuffle_layers_amount)
if self._configuration.options.use_overlap:
layer_generator = OverLapGenerator(layer_generator, self._configuration.options.overlap_amount)
if self._configuration.serial.on:
self._commander = SerialCommander(self._configuration.serial.port)
else:
self._commander = NullCommander()
self.laser_control = LaserControl(self._configuration.cure_rate.override_laser_power_amount)
transformer = HomogenousTransformer(
self._configuration.calibration.max_deflection,
self._configuration.calibration.height,
self._configuration.calibration.lower_points,
self._configuration.calibration.upper_points,
)
state = MachineState()
self._status = MachineStatus()
if dry_run:
abort_on_error = False
else:
abort_on_error = True
self._zaxis = self._get_zaxis(dry_run)
disseminator = self._get_digital_disseminator(dry_run)
path_to_points = PathToPoints(
disseminator.samples_per_second,
transformer,
self._configuration.options.laser_thickness_mm
)
if force_source_speed:
override_draw_speed = None
override_move_speed = None
else:
override_draw_speed = self._configuration.cure_rate.draw_speed if self._configuration.cure_rate.use_draw_speed else None
override_move_speed = self._configuration.cure_rate.move_speed if self._configuration.cure_rate.use_draw_speed else None
pre_layer_delay = self._configuration.options.pre_layer_delay if self._configuration.options.pre_layer_delay else 0.0
post_fire_delay_speed = None
slew_delay_speed = None
if self._configuration.options.post_fire_delay:
post_fire_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.post_fire_delay) / 1000.0)
if self._configuration.options.slew_delay:
slew_delay_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.slew_delay) / 1000.0)
if self._configuration.options.wait_after_move_milliseconds > 0:
wait_speed = self._configuration.options.laser_thickness_mm / (float(self._configuration.options.wait_after_move_milliseconds) / 1000.0)
else:
wait_speed = None
self._writer = LayerWriter(
disseminator,
path_to_points,
self.laser_control,
state,
move_distance_to_ignore=self._configuration.options.laser_thickness_mm,
override_draw_speed=override_draw_speed,
override_move_speed=override_move_speed,
wait_speed=wait_speed,
post_fire_delay_speed=post_fire_delay_speed,
slew_delay_speed=slew_delay_speed
)
self._layer_processing = LayerProcessing(
self._writer,
state,
self._status,
zaxis=self._zaxis,
max_lead_distance=self._configuration.dripper.max_lead_distance_mm,
commander=self._commander,
pre_layer_delay=pre_layer_delay,
layer_start_command=self._configuration.serial.layer_started,
layer_ended_command=self._configuration.serial.layer_ended,
print_start_command=self._configuration.serial.print_start,
print_ended_command=self._configuration.serial.print_ended,
dripper_on_command=self._configuration.serial.on_command,
dripper_off_command=self._configuration.serial.off_command,
)
if self._zaxis:
self._zaxis.set_call_back(self._status.drip_call_back)
self._zaxis.start()
self._controller = Controller(
self._writer,
self._layer_processing,
layer_generator,
self._status,
abort_on_error=abort_on_error,
)
self._controller.start()
def get_status(self):
'''Returns a status dictionary of the print containing:
start_time
elapsed_time
current_layer
status -> ['Complete', 'Cancelled', 'Failed', 'Starting', 'Running']
errors
waiting_for_drips
height
drips
drips_per_second
model_height
skipped_layers
drip_histor
'''
return self._controller.get_status()
def can_set_drips_per_second(self):
'''When using an emulated dripper this returns if the use can cahnge the drip rate manually via software'''
if getattr(self._zaxis, 'set_drips_per_second', False):
return True
else:
return False
def set_drips_per_second(self, drips_per_second):
'''Allows a user to set the number of drips per second in realtime whilst using the emulated dripper'''
if getattr(self._zaxis, 'set_drips_per_second', False):
self._zaxis.set_drips_per_second(drips_per_second)
else:
logger.error('Cannot change drips per second on %s' % type(self._zaxis))
raise Exception('Cannot change drips per second on %s' % type(self._zaxis))
def get_drips_per_second(self):
'''Gets the current setting for drips per second when using the emulated dripper'''
if getattr(self._zaxis, 'get_drips_per_second'):
return self._zaxis.get_drips_per_second()
else:
logger.warning("Drips per second requested but does not exist")
return 0.0
def verify_gcode(self, file_name):
'''Runs a test of the gcode without printing to verify file intregrity ununsed at this time'''
self.print_gcode(file_name, print_sub_layers=False, dry_run=True)
def close(self):
'''Close the api required before running a second print or shutting down'''
if self._zaxis:
self._zaxis.close()
if self._controller:
self._controller.close()
else:
logger.warning('Stopped before printing')
if self._current_file:
self._current_file.close()
logger.info("File Closed")
if self._notification_service:
self._notification_service.send_message("Print Complete", "%s is complete" % self._current_file_name)
