def decomposition(phi, wires):
return [
qml.Hadamard(wires=[wires[0]]),
qml.CY(wires=wires),
qml.RY(phi / 2, wires=[wires[0]]),
qml.RX(-phi / 2, wires=[wires[1]]),
qml.CY(wires=wires),
qml.Hadamard(wires=[wires[0]]),
]
def test_control_sanity_check():
"""Test that control works on a very standard usecase."""
def make_ops():
qml.RX(0.123, wires=0)
qml.RY(0.456, wires=2)
qml.RX(0.789, wires=0)
qml.Rot(0.111, 0.222, 0.333, wires=2),
qml.PauliX(wires=2)
qml.PauliY(wires=4)
qml.PauliZ(wires=0)
with QuantumTape() as tape:
cmake_ops = ctrl(make_ops, control=1)
#Execute controlled version.
cmake_ops()
expected = [
qml.CRX(0.123, wires=[1, 0]),
qml.CRY(0.456, wires=[1, 2]),
qml.CRX(0.789, wires=[1, 0]),
qml.CRot(0.111, 0.222, 0.333, wires=[1, 2]),
qml.CNOT(wires=[1, 2]),
qml.CY(wires=[1, 4]),
qml.CZ(wires=[1, 0]),
]
assert len(tape.operations) == 1
ctrl_op = tape.operations[0]
assert isinstance(ctrl_op, ControlledOperation)
expanded = ctrl_op.expand()
assert_equal_operations(expanded.operations, expected)
def parameterized_qubit_tape():
"""A parametrized qubit ciruit."""
a, b, c = 0.1, 0.2, 0.3
angles = np.array([0.4, 0.5, 0.6])
with qml.tape.QuantumTape() as tape:
qml.RX(a, wires=0)
qml.RX(b, wires=1)
qml.PauliZ(1)
qml.CNOT(wires=[0, 1]).inv()
qml.CRY(b, wires=[3, 1])
qml.RX(angles[0], wires=0)
qml.RX(4 * angles[1], wires=1)
qml.PhaseShift(17 / 9 * c, wires=2)
qml.RZ(b, wires=3)
qml.RX(angles[2], wires=2).inv()
qml.CRY(0.3589, wires=[3, 1]).inv()
qml.CSWAP(wires=[4, 2, 1]).inv()
qml.QubitUnitary(np.eye(2), wires=[2])
qml.ControlledQubitUnitary(np.eye(2), control_wires=[0, 1], wires=[2])
qml.MultiControlledX(control_wires=[0, 1, 2], wires=[3])
qml.Toffoli(wires=[0, 2, 1])
qml.CNOT(wires=[0, 2])
qml.PauliZ(wires=[1])
qml.PauliZ(wires=[1]).inv()
qml.CZ(wires=[0, 1])
qml.CZ(wires=[0, 2]).inv()
qml.CY(wires=[1, 2])
qml.CY(wires=[2, 0]).inv()
qml.CNOT(wires=[2, 1])
qml.CNOT(wires=[0, 2])
qml.SWAP(wires=[0, 2]).inv()
qml.CNOT(wires=[1, 3])
qml.RZ(b, wires=3)
qml.CSWAP(wires=[4, 0, 1])
qml.expval(qml.PauliY(0)),
qml.var(qml.Hadamard(wires=1)),
qml.sample(qml.PauliX(2)),
qml.expval(qml.Hermitian(np.eye(4), wires=[3, 4])),
return tape
def qfunc(x, y, z):
qml.Hadamard(wires=wires[0])
qml.RZ(z, wires=wires[2])
qml.CNOT(wires=[wires[2], wires[1]])
qml.CNOT(wires=[wires[1], wires[0]])
qml.RX(x, wires=wires[0])
qml.CNOT(wires=[wires[1], wires[0]])
qml.RZ(-z, wires=wires[2])
qml.RX(y, wires=wires[0])
qml.PauliY(wires=wires[2])
qml.CY(wires=[wires[1], wires[2]])
return qml.expval(qml.PauliZ(wires=wires[0]))
def op(op_name):
ops_list = {
"RX": qml.RX(0.123, wires=0),
"RY": qml.RY(1.434, wires=0),
"RZ": qml.RZ(2.774, wires=0),
"S": qml.S(wires=0),
"SX": qml.SX(wires=0),
"T": qml.T(wires=0),
"CNOT": qml.CNOT(wires=[0, 1]),
"CZ": qml.CZ(wires=[0, 1]),
"CY": qml.CY(wires=[0, 1]),
"SWAP": qml.SWAP(wires=[0, 1]),
"ISWAP": qml.ISWAP(wires=[0, 1]),
"SISWAP": qml.SISWAP(wires=[0, 1]),
"SQISW": qml.SQISW(wires=[0, 1]),
"CSWAP": qml.CSWAP(wires=[0, 1, 2]),
"PauliRot": qml.PauliRot(0.123, "Y", wires=0),
"IsingXX": qml.IsingXX(0.123, wires=[0, 1]),
"IsingXY": qml.IsingXY(0.123, wires=[0, 1]),
"IsingYY": qml.IsingYY(0.123, wires=[0, 1]),
"IsingZZ": qml.IsingZZ(0.123, wires=[0, 1]),
"Identity": qml.Identity(wires=0),
"Rot": qml.Rot(0.123, 0.456, 0.789, wires=0),
"Toffoli": qml.Toffoli(wires=[0, 1, 2]),
"PhaseShift": qml.PhaseShift(2.133, wires=0),
"ControlledPhaseShift": qml.ControlledPhaseShift(1.777, wires=[0, 2]),
"CPhase": qml.CPhase(1.777, wires=[0, 2]),
"MultiRZ": qml.MultiRZ(0.112, wires=[1, 2, 3]),
"CRX": qml.CRX(0.836, wires=[2, 3]),
"CRY": qml.CRY(0.721, wires=[2, 3]),
"CRZ": qml.CRZ(0.554, wires=[2, 3]),
"Hadamard": qml.Hadamard(wires=0),
"PauliX": qml.PauliX(wires=0),
"PauliY": qml.PauliY(wires=0),
"PauliZ": qml.PauliZ(wires=0),
"CRot": qml.CRot(0.123, 0.456, 0.789, wires=[0, 1]),
"DiagonalQubitUnitary": qml.DiagonalQubitUnitary(np.array([1.0, 1.0j]), wires=1),
"ControlledQubitUnitary": qml.ControlledQubitUnitary(
np.eye(2) * 1j, wires=[0], control_wires=[2]
),
"MultiControlledX": qml.MultiControlledX(wires=(0, 1, 2), control_values="01"),
"SingleExcitation": qml.SingleExcitation(0.123, wires=[0, 3]),
"SingleExcitationPlus": qml.SingleExcitationPlus(0.123, wires=[0, 3]),
"SingleExcitationMinus": qml.SingleExcitationMinus(0.123, wires=[0, 3]),
"DoubleExcitation": qml.DoubleExcitation(0.123, wires=[0, 1, 2, 3]),
"DoubleExcitationPlus": qml.DoubleExcitationPlus(0.123, wires=[0, 1, 2, 3]),
"DoubleExcitationMinus": qml.DoubleExcitationMinus(0.123, wires=[0, 1, 2, 3]),
"QFT": qml.QFT(wires=0),
"QubitSum": qml.QubitSum(wires=[0, 1, 2]),
"QubitCarry": qml.QubitCarry(wires=[0, 1, 2, 3]),
"QubitUnitary": qml.QubitUnitary(np.eye(2) * 1j, wires=0),
}
return ops_list.get(op_name)
def test_CY_decomposition(self, tol):
"""Tests that the decomposition of the CY gate is correct"""
op = qml.CY(wires=[0, 1])
res = op.decomposition(op.wires)
mats = []
for i in reversed(res):
if len(i.wires) == 1:
mats.append(np.kron(i.matrix, np.eye(2)))
else:
mats.append(i.matrix)
decomposed_matrix = np.linalg.multi_dot(mats)
assert np.allclose(decomposed_matrix, op.matrix, atol=tol, rtol=0)
np.random.seed(42)
# ==========================================================
# Some useful global variables
# gates for which device support is tested
ops = {
"BasisState": qml.BasisState(np.array([0]), wires=[0]),
"CNOT": qml.CNOT(wires=[0, 1]),
"CRX": qml.CRX(0, wires=[0, 1]),
"CRY": qml.CRY(0, wires=[0, 1]),
"CRZ": qml.CRZ(0, wires=[0, 1]),
"CRot": qml.CRot(0, 0, 0, wires=[0, 1]),
"CSWAP": qml.CSWAP(wires=[0, 1, 2]),
"CZ": qml.CZ(wires=[0, 1]),
"CY": qml.CY(wires=[0, 1]),
"DiagonalQubitUnitary": qml.DiagonalQubitUnitary(np.array([1, 1]), wires=[0]),
"Hadamard": qml.Hadamard(wires=[0]),
"MultiRZ": qml.MultiRZ(0, wires=[0]),
"PauliX": qml.PauliX(wires=[0]),
"PauliY": qml.PauliY(wires=[0]),
"PauliZ": qml.PauliZ(wires=[0]),
"PhaseShift": qml.PhaseShift(0, wires=[0]),
"ControlledPhaseShift": qml.ControlledPhaseShift(0, wires=[0, 1]),
"QubitStateVector": qml.QubitStateVector(np.array([1.0, 0.0]), wires=[0]),
"QubitUnitary": qml.QubitUnitary(np.eye(2), wires=[0]),
"ControlledQubitUnitary": qml.ControlledQubitUnitary(np.eye(2), control_wires=[1], wires=[0]),
"MultiControlledX": qml.MultiControlledX(control_wires=[1, 2], wires=[0]),
"RX": qml.RX(0, wires=[0]),
"RY": qml.RY(0, wires=[0]),
"RZ": qml.RZ(0, wires=[0]),
def qfunc():
qml.CRY(-0.2, wires=["a", 2])
qml.PauliY(wires="a")
qml.CNOT(wires=[1, 2])
qml.CY(wires=["a", 1])
qml.RY(0.3, wires="a")
"CNOT": qml.CNOT(wires=[0, 1]), "CRX": qml.CRX(0, wires=[0, 1]), "CRY": qml.CRY(0, wires=[0, 1]), "CRZ": qml.CRZ(0, wires=[0, 1]), "CRot": qml.CRot(0, 0, 0, wires=[0, 1]), "CSWAP": qml.CSWAP(wires=[0, 1, 2]), "CZ": qml.CZ(wires=[0, 1]), "CY": qml.CY(wires=[0, 1]), "DiagonalQubitUnitary": qml.DiagonalQubitUnitary(np.array([1, 1]), wires=[0]), "Hadamard": qml.Hadamard(wires=[0]), "MultiRZ": qml.MultiRZ(0, wires=[0]), "PauliX": qml.PauliX(wires=[0]), "PauliY": qml.PauliY(wires=[0]), "PauliZ": qml.PauliZ(wires=[0]), "PhaseShift": qml.PhaseShift(0, wires=[0]), "ControlledPhaseShift":
def decomposition(phi, wires):
return [
qml.CY(wires=wires),
qml.RY(phi, wires=[wires[0]]),
qml.CY(wires=wires),
]
"""Test WireCut gets correct special call."""
with QuantumTape() as tape:
qml.WireCut(wires=(0, 1))
_, ax = tape_mpl(tape)
layer = 0
assert len(ax.lines) == 2
assert len(ax.collections) == 2
plt.close()
controlled_data = [
(qml.CY(wires=(0, 1)), "Y"),
(qml.CRX(1.2345, wires=(0, 1)), "RX"),
(qml.CRot(1.2, 2.2, 3.3, wires=(0, 1)), "Rot"),
]
class TestControlledGates:
"""Tests generic controlled gates"""
width = 0.75 - 2 * 0.2
@pytest.mark.parametrize("op, label", controlled_data)
def test_control_gates(self, op, label):
"""Test a variety of non-special gates. Checks control wires are drawn, and
that a box is drawn over the target wires."""
assert np.allclose(f(), rnd_state)
spy.assert_called()
label_data = [
(qml.Identity(0), "I", "I"),
(qml.Hadamard(0), "H", "H"),
(qml.PauliX(0), "X", "X"),
(qml.PauliY(0), "Y", "Y"),
(qml.PauliZ(0), "Z", "Z"),
(qml.S(wires=0), "S", "S⁻¹"),
(qml.T(wires=0), "T", "T⁻¹"),
(qml.SX(wires=0), "SX", "SX⁻¹"),
(qml.CNOT(wires=(0, 1)), "⊕", "⊕"),
(qml.CZ(wires=(0, 1)), "Z", "Z"),
(qml.CY(wires=(0, 1)), "Y", "Y"),
(qml.SWAP(wires=(0, 1)), "SWAP", "SWAP⁻¹"),
(qml.ISWAP(wires=(0, 1)), "ISWAP", "ISWAP⁻¹"),
(qml.SISWAP(wires=(0, 1)), "SISWAP", "SISWAP⁻¹"),
(qml.SQISW(wires=(0, 1)), "SISWAP", "SISWAP⁻¹"),
(qml.CSWAP(wires=(0, 1, 2)), "SWAP", "SWAP"),
(qml.Toffoli(wires=(0, 1, 2)), "⊕", "⊕"),
(qml.MultiControlledX(control_wires=(0, 1, 2), wires=(3)), "⊕", "⊕"),
(qml.Barrier(0), "||", "||"),
(qml.WireCut(wires=0), "//", "//"),
]
@pytest.mark.parametrize("op, label1, label2", label_data)
def test_label_method(op, label1, label2):
assert op.label() == label1
