def perf(self):
"""Aircraft performance"""
swbada = False # no-bada version
# allocate aircraft to their flight phase
self.phase, self.bank = \
phases(self.traf.alt, self.traf.gs, self.traf.delalt, \
self.traf.cas, self.vmto, self.vmic, self.vmap, self.vmcr, self.vmld, self.traf.bank, self.traf.bphase, \
self.traf.hdgsel,swbada)
# AERODYNAMICS
# compute CL: CL = 2*m*g/(VTAS^2*rho*S)
self.qS = 0.5*self.traf.rho*np.maximum(1.,self.traf.tas)*np.maximum(1.,self.traf.tas)*self.Sref
cl = self.mass*g0/(self.qS*np.cos(self.bank))*(self.phase!=6)+ 0.*(self.phase==6)
# scaling factors for CD0 and CDi during flight phases according to FAA (2005): SAGE, V. 1.5, Technical Manual
CD0f = (self.phase==1)*(self.etype==1)*coeffBS.d_CD0j[0] + \
(self.phase==2)*(self.etype==1)*coeffBS.d_CD0j[1] + \
(self.phase==3)*(self.etype==1)*coeffBS.d_CD0j[2] + \
(self.phase==4)*(self.etype==1)*coeffBS.d_CD0j[3] + \
(self.phase==5)*(self.etype==1)*(self.traf.alt>=450)*coeffBS.d_CD0j[4] + \
(self.phase==5)*(self.etype==1)*(self.traf.alt<450)*coeffBS.d_CD0j[5] + \
(self.phase==1)*(self.etype==2)*coeffBS.d_CD0t[0] + \
(self.phase==2)*(self.etype==2)*coeffBS.d_CD0t[1] + \
(self.phase==3)*(self.etype==2)*coeffBS.d_CD0t[2] + \
(self.phase==4)*(self.etype==2)*coeffBS.d_CD0t[3]
# (self.phase==5)*(self.etype==2)*(self.alt>=450)*coeffBS.d_CD0t[4] + \
# (self.phase==5)*(self.etype==2)*(self.alt<450)*coeffBS.d_CD0t[5]
kf = (self.phase==1)*(self.etype==1)*coeffBS.d_kj[0] + \
(self.phase==2)*(self.etype==1)*coeffBS.d_kj[1] + \
(self.phase==3)*(self.etype==1)*coeffBS.d_kj[2] + \
(self.phase==4)*(self.etype==1)*coeffBS.d_kj[3] + \
(self.phase==5)*(self.etype==1)*(self.traf.alt>=450)*coeffBS.d_kj[4] + \
(self.phase==5)*(self.etype==1)*(self.traf.alt<450)*coeffBS.d_kj[5] + \
(self.phase==1)*(self.etype==2)*coeffBS.d_kt[0] + \
(self.phase==2)*(self.etype==2)*coeffBS.d_kt[1] + \
(self.phase==3)*(self.etype==2)*coeffBS.d_kt[2] + \
(self.phase==4)*(self.etype==2)*coeffBS.d_kt[3] + \
(self.phase==5)*(self.etype==2)*(self.traf.alt>=450)*coeffBS.d_kt[4] + \
(self.phase==5)*(self.etype==2)*(self.traf.alt<450)*coeffBS.d_kt[5]
# print "KF climb",(self.phase == 3)*(self.etype==1)*(self.traf.delalt>1)*coeffBS.d_kj[1]
# print "KF cruise",(self.phase == 3)*(self.etype==1)*((self.traf.delalt>-1 )& (self.traf.delalt<1))*coeffBS.d_kj[2]
# print "KF descent",(self.phase == 3)*(self.etype==1)*(self.traf.delalt<-1)*coeffBS.d_kj[3]
# print CD0f, kf
# line for kf-c and kf+fuel
cd = self.CD0*CD0f + self.k*kf*(cl**2)
# line for w/o
#cd = self.CD0+self.k*(cl**2)
# print "CL", cl, "CD", cd
# compute drag: CD = CD0 + CDi * CL^2 and D = rho/2*VTAS^2*CD*S
self.D = cd*self.qS
# energy share factor and crossover altitude
epsalt = np.array([0.001]*self.traf.ntraf)
self.climb = np.array(self.traf.delalt > epsalt)
self.descent = np.array(self.traf.delalt<epsalt)
#crossover altitude (BADA User Manual 3.12, p. 12)
self.atrans = (1000/6.5)*(T0*(1-((((1+gamma1*(self.refcas/a0)**2)**(gamma2))-1) / \
(((1+gamma1*self.refma**2)**(gamma2))-1))**((-(beta)*R)/g0)))
# crossover altitiude
self.traf.abco = np.array(self.traf.alt>self.atrans)
self.traf.belco = np.array(self.traf.alt<self.atrans)
# energy share factor
self.ESF = esf(self.traf.abco, self.traf.belco, self.traf.alt, self.traf.M,\
self.climb, self.descent, self.traf.delspd)
# THRUST
# determine vertical speed
swvs = (np.abs(self.traf.desvs) > self.traf.eps)
vspd = swvs * self.traf.desvs + (1. - swvs) * self.traf.avsdef * np.sign(self.traf.delalt)
swaltsel = np.abs(self.traf.delalt) > np.abs(2. * self.traf.perfdt * np.abs(vspd))
self.traf.vs = swaltsel * vspd
self.Thr = (((self.traf.vs*self.mass*g0)/(self.ESF*np.maximum(self.traf.eps, self.traf.tas))) + self.D)
# maximum thrust jet (Bruenig et al., p. 66):
mt_jet = self.rThr*(self.traf.rho/rho0)**0.75
# maximum thrust prop (Raymer, p.36):
mt_prop = self.P*self.eta/np.maximum(self.traf.eps, self.traf.tas)
# merge
self.maxthr = mt_jet*(self.etype==1) + mt_prop*(self.etype==2)
# Fuel Flow
# jet aircraft
# ratio current thrust/rated thrust
pThr = self.Thr/self.rThr
# fuel flow is assumed to be proportional to thrust(Torenbeek, p.62).
#For ground operations, idle thrust is used
# cruise thrust is approximately equal to approach thrust
ff_jet = ((pThr*self.ffto)*(self.phase!=6)*(self.phase!=3)+ \
self.ffid*(self.phase==6) + self.ffap*(self.phase==3) )*(self.etype==1)
# print "FFJET", (pThr*self.ffto)*(self.phase!=6)*(self.phase!=3), self.ffid*(self.phase==6), self.ffap*(self.phase==3)
# print "FFJET", ff_jet
# turboprop aircraft
# to be refined - f(spd)
# CRUISE-ALTITUDE!!!
# above cruise altitude: PSFC_CR
PSFC = (((self.PSFC_CR - self.PSFC_TO) / 20000.0)*self.traf.alt + self.PSFC_TO)*(self.traf.alt<20.000) + \
self.PSFC_CR*(self.traf.alt >= 20.000)
TSFC =PSFC*self.traf.tas/(550.0*self.eta)
# formula p.36 Raymer is missing here!
ff_prop = self.Thr*TSFC*(self.etype==2)
# combine
self.ff = ff_jet + ff_prop
# update mass
#self.mass = self.mass - self.ff*self.traf.perfdt/60. # Use fuelflow in kg/min
# print self.traf.id, self.phase, self.traf.alt/ft, self.traf.tas/kts, self.traf.cas/kts, self.traf.M, \
# self.Thr, self.D, self.ff, cl, cd, self.traf.vs/fpm, self.ESF,self.atrans, self.maxthr, \
# self.vmto/kts, self.vmic/kts ,self.vmcr/kts, self.vmap/kts, self.vmld/kts, \
# CD0f, kf, self.hmaxact
return
def perf(self, simt):
if abs(simt - self.t0) >= self.dt:
self.t0 = simt
else:
return
"""AIRCRAFT PERFORMANCE"""
# BADA version
swbada = True
# flight phase
self.phase, self.bank = \
phases(bs.traf.alt, bs.traf.gs, bs.traf.delalt, \
bs.traf.cas, self.vmto, self.vmic, self.vmap, self.vmcr, self.vmld, bs.traf.bank, bs.traf.bphase, \
bs.traf.hdgsel, swbada)
# AERODYNAMICS
# Lift
self.qS = 0.5 * bs.traf.rho * np.maximum(1., bs.traf.tas) * np.maximum(
1., bs.traf.tas) * self.Sref
cl = self.mass * g0 / (self.qS * np.cos(self.bank)) * (
self.phase != PHASE["GD"]) + 0. * (self.phase == PHASE["GD"])
# Drag
# Drag Coefficient
# phases TO, IC, CR
cdph = self.cd0cr + self.cd2cr * (cl * cl)
# phase AP
# in case approach coefficients in OPF-Files are set to zero:
#Use cruise values instead
cdapp = np.where(self.cd0ap != 0, self.cd0ap + self.cd2ap * (cl * cl),
cdph)
# phase LD
# in case landing coefficients in OPF-Files are set to zero:
#Use cruise values instead
cdld = np.where(self.cd0ld != 0, self.cd0ld + self.cd2ld * (cl * cl),
cdph)
# now combine phases
cd = (self.phase==PHASE['TO'])*cdph + (self.phase==PHASE["IC"])*cdph + (self.phase==PHASE["CR"])*cdph \
+ (self.phase==PHASE['AP'])*cdapp + (self.phase ==PHASE['LD'])*cdld
# Drag:
self.D = cd * self.qS
# energy share factor and crossover altitude
# conditions
epsalt = np.array([0.001] * bs.traf.ntraf)
self.climb = np.array(bs.traf.delalt > epsalt)
self.descent = np.array(bs.traf.delalt < -epsalt)
lvl = np.array(np.abs(bs.traf.delalt) < 0.0001) * 1
# crossover altitiude
atrans = self.atranscl * self.climb + self.atransdes * (1 - self.climb)
bs.traf.abco = np.array(bs.traf.alt > atrans)
bs.traf.belco = np.array(bs.traf.alt < atrans)
# energy share factor
self.ESF = esf(bs.traf.abco, bs.traf.belco, bs.traf.alt, bs.traf.M,\
self.climb, self.descent, bs.traf.delspd)
# THRUST
# 1. climb: max.climb thrust in ISA conditions (p. 32, BADA User Manual 3.12)
# condition: delta altitude positive
# temperature correction for non-ISA (as soon as applied)
# ThrISA = (1-self.ctct2*(self.dtemp-self.ctct1))
# jet
# condition
cljet = np.logical_and.reduce([self.climb, self.jet]) * 1
# thrust
Tj = self.ctcth1 * (1 -
(bs.traf.alt / ft) / self.ctcth2 + self.ctcth3 *
(bs.traf.alt / ft) * (bs.traf.alt / ft))
# combine jet and default aircraft
Tjc = cljet * Tj # *ThrISA
# turboprop
# condition
clturbo = np.logical_and.reduce([self.climb, self.turbo]) * 1
# thrust
Tt = self.ctcth1 / np.maximum(1., bs.traf.tas / kts) * (
1 - (bs.traf.alt / ft) / self.ctcth2) + self.ctcth3
# merge
Ttc = clturbo * Tt # *ThrISA
# piston
clpiston = np.logical_and.reduce([self.climb, self.piston]) * 1
Tp = self.ctcth1 * (
1 - (bs.traf.alt / ft) / self.ctcth2) + self.ctcth3 / np.maximum(
1., bs.traf.tas / kts)
Tpc = clpiston * Tp
# max climb thrust for futher calculations (equals maximum avaliable thrust)
maxthr = Tj * self.jet + Tt * self.turbo + Tp * self.piston
# 2. level flight: Thr = D.
Tlvl = lvl * self.D
# 3. Descent: condition: vs negative/ H>hdes: fixed formula. H<hdes: phase cr, ap, ld
# above or below Hpdes? Careful! If non-ISA: ALT must be replaced by Hp!
delh = (bs.traf.alt - self.hpdes)
# above Hpdes:
high = np.array(delh > 0)
Tdesh = maxthr * self.ctdesh * np.logical_and.reduce(
[self.descent, high])
# below Hpdes
low = np.array(delh < 0)
# phase cruise
Tdeslc = maxthr * self.ctdesl * np.logical_and.reduce(
[self.descent, low, (self.phase == PHASE['CR'])])
# phase approach
Tdesla = maxthr * self.ctdesa * np.logical_and.reduce(
[self.descent, low, (self.phase == PHASE['AP'])])
# phase landing
Tdesll = maxthr * self.ctdesld * np.logical_and.reduce(
[self.descent, low, (self.phase == PHASE['LD'])])
# phase ground: minimum descent thrust as a first approach
Tgd = np.minimum.reduce([Tdesh, Tdeslc]) * (self.phase == PHASE['GD'])
# merge all thrust conditions
T = np.maximum.reduce(
[Tjc, Ttc, Tpc, Tlvl, Tdesh, Tdeslc, Tdesla, Tdesll, Tgd])
# vertical speed
# vertical speed. Note: ISA only ( tISA = 1 )
# for climbs: reducing factor (reduced climb power) is multiplied
# cred applies below 0.8*hmax and for climbing aircraft only
hcred = np.array(bs.traf.alt < (self.hmaxact * 0.8))
clh = np.logical_and.reduce([hcred, self.climb])
cred = self.cred * clh
cpred = 1 - cred * ((self.mmax - self.mass) / (self.mmax - self.mmin))
# switch for given vertical speed avs
if (bs.traf.avs.any() > 0) or (bs.traf.avs.any() < 0):
# thrust = f(avs)
T = ((bs.traf.avs!=0)*(((bs.traf.pilot.vs*self.mass*g0)/ \
(self.ESF*np.maximum(bs.traf.eps,bs.traf.tas)*cpred)) \
+ self.D)) + ((bs.traf.avs==0)*T)
self.Thr = T
# Fuel consumption
# thrust specific fuel consumption - jet
# thrust
etaj = self.cf1 * (1.0 + (bs.traf.tas / kts) / self.cf2)
# merge
ej = etaj * self.jet
# thrust specific fuel consumption - turboprop
# thrust
etat = self.cf1 * (1. - (bs.traf.tas / kts) / self.cf2) * (
(bs.traf.tas / kts) / 1000.)
# merge
et = etat * self.turbo
# thrust specific fuel consumption for all aircraft
# eta is given in [kg/(min*kN)] - convert to [kg/(min*N)]
eta = np.maximum.reduce([ej, et]) / 1000.
# nominal fuel flow - (jet & turbo) and piston
# condition jet,turbo:
jt = np.maximum.reduce([self.jet, self.turbo])
pdf = np.maximum.reduce([self.piston])
fnomjt = eta * self.Thr * jt
fnomp = self.cf1 * pdf
# merge
fnom = fnomjt + fnomp
# minimal fuel flow jet, turbo and piston
fminjt = self.cf3 * (1 - (bs.traf.alt / ft) / self.cf4) * jt
fminp = self.cf3 * pdf
#merge
fmin = fminjt + fminp
# cruise fuel flow jet, turbo and piston
fcrjt = eta * self.Thr * self.cf_cruise * jt
fcrp = self.cf1 * self.cf_cruise * pdf
#merge
fcr = fcrjt + fcrp
# approach/landing fuel flow
fal = np.maximum(fnom, fmin)
# designate each aircraft to its fuelflow
# takeoff
ffto = fnom * (self.phase == PHASE['TO'])
# initial climb
ffic = fnom * (self.phase == PHASE['IC']) / 2
# phase cruise and climb
cc = np.logical_and.reduce([self.climb,
(self.phase == PHASE['CR'])]) * 1
ffcc = fnom * cc
# cruise and level
ffcrl = fcr * lvl
# descent cruise configuration
cd2 = np.logical_and.reduce(
[self.descent, (self.phase == PHASE['CR'])]) * 1
ffcd = cd2 * fmin
# approach
ffap = fal * (self.phase == PHASE['AP'])
# landing
ffld = fal * (self.phase == PHASE['LD'])
# ground
ffgd = fmin * (self.phase == PHASE['GD'])
# fuel flow for each condition
self.ff = np.maximum.reduce([
ffto, ffic, ffcc, ffcrl, ffcd, ffap, ffld, ffgd
]) / 60. # convert from kg/min to kg/sec
# update mass
self.mass = self.mass - self.ff * self.dt # Use fuelflow in kg/min
# for aircraft on the runway and taxiways we need to know, whether they
# are prior or after their flight
self.post_flight = np.where(self.descent, True, self.post_flight)
# when landing, we would like to stop the aircraft.
bs.traf.pilot.spd = np.where(
(bs.traf.alt < 0.5) * (self.post_flight) * self.pf_flag, 0.0,
bs.traf.pilot.spd)
# otherwise taxiing will be impossible afterwards
# pf_flag is released so post_flight flag is only triggered once
self.pf_flag = np.where((bs.traf.alt < 0.5) * (self.post_flight),
False, self.pf_flag)
return
def perf(self):
"""AIRCRAFT PERFORMANCE"""
# flight phase
self.phase, self.bank = \
phases(self.traf.alt, self.traf.gs, self.traf.delalt, \
self.traf.cas, self.vmto, self.vmic, self.vmap, self.vmcr, self.vmld, self.traf.bank, self.traf.bphase, \
self.traf.hdgsel, self.traf.bada)
# AERODYNAMICS
# Lift
self.qS = 0.5*self.traf.rho*np.maximum(1.,self.traf.tas)*np.maximum(1.,self.traf.tas)*self.Sref
cl = self.mass*g0/(self.qS*np.cos(self.bank))*(self.phase!=6)+ 0.*(self.phase==6)
# Drag
# Drag Coefficient
# phases TO, IC, CR
cdph = self.cd0cr+self.cd2cr*(cl**2)
# phase AP
cdapp = self.cd0ap+self.cd2ap*(cl**2)
# in case approach coefficients in OPF-Files are set to zero:
#Use cruise values instead
cdapp = cdapp + (cdapp ==0)*cdph
# phase LD
cdld = self.cd0ld + self.gear + self.cd2ld*(cl**2)
# in case landing coefficients in OPF-Files are set to zero:
#Use cruise values instead
cdld = cdld + (cdld ==0)*cdph
# now combine phases
cd = (self.phase==1)*cdph + (self.phase==2)*cdph + (self.phase==3)*cdph \
+ (self.phase==4)*cdapp + (self.phase ==5)*cdld
# Drag:
self.D = cd*self.qS
# energy share factor and crossover altitude
# conditions
epsalt = np.array([0.001]*self.traf.ntraf)
self.climb = np.array(self.traf.delalt > epsalt)
self.descent = np.array(self.traf.delalt<epsalt)
lvl = np.array(np.abs(self.traf.delalt)<0.0001)*1
# designate reference CAS to phases
cascl = self.cascl*self.climb
cascr = self.cascr*lvl
casdes = self.casdes*self.descent
self.refcas = np.maximum.reduce([cascl, cascr, casdes])
# designate reference Ma to phases
macl = self.macl*self.climb
macr = self.macr*(np.abs(self.traf.delalt) < epsalt)
mades = self.mades*self.descent
self.refma = np.maximum.reduce([macl, macr, mades])
# crossover altitude (BADA User Manual 3.12, p. 12)
self.atrans = (1000/6.5)*(T0*(1-((((1+gamma1*(self.refcas/a0)**2)**(gamma2))-1) / \
(((1+gamma1*self.refma**2)**(gamma2))-1))**((-(beta)*R)/g0)))
# crossover altitiude
self.traf.abco = np.array(self.traf.alt>self.atrans)
self.traf.belco = np.array(self.traf.alt<self.atrans)
# energy share factor
self.ESF = esf(self.traf.abco, self.traf.belco, self.traf.alt, self.traf.M,\
self.climb, self.descent, self.traf.delspd)
# THRUST
# 1. climb: max.climb thrust in ISA conditions (p. 32, BADA User Manual 3.12)
# condition: delta altitude positive
self.jet = np.array(self.etype == 1)*1
self.turbo = np.array(self.etype == 2) *1
self.piston = np.array(self.etype == 3)*1
# temperature correction for non-ISA (as soon as applied)
# ThrISA = (1-self.ctct2*(self.dtemp-self.ctct1))
# jet
# condition
cljet = np.logical_and.reduce([self.climb, self.jet]) *1
# thrust
Tj = self.ctcth1* (1-(self.traf.alt/ft)/self.ctcth2+self.ctcth3*(self.traf.alt/ft)**2)
# combine jet and default aircraft
Tjc = cljet*Tj # *ThrISA
# turboprop
# condition
clturbo = np.logical_and.reduce([self.climb, self.turbo])*1
# thrust
Tt = self.ctcth1/np.maximum(1.,self.traf.tas/kts)*(1-(self.traf.alt/ft)/self.ctcth2)+self.ctcth3
# merge
Ttc = clturbo*Tt # *ThrISA
# piston
clpiston = np.logical_and.reduce([self.climb, self.piston])*1
Tp = self.ctcth1*(1-(self.traf.alt/ft)/self.ctcth2)+self.ctcth3/np.maximum(1.,self.traf.tas/kts)
Tpc = clpiston*Tp
# max climb thrust for futher calculations (equals maximum avaliable thrust)
maxthr = Tj*self.jet + Tt*self.turbo + Tp*self.piston
# 2. level flight: Thr = D.
Tlvl = lvl*self.D
# 3. Descent: condition: vs negative/ H>hdes: fixed formula. H<hdes: phase cr, ap, ld
# above or below Hpdes? Careful! If non-ISA: ALT must be replaced by Hp!
delh = (self.traf.alt - self.hpdes)
# above Hpdes:
high = np.array(delh>0)
Tdesh = maxthr*self.ctdesh*np.logical_and.reduce([self.descent, high])
# below Hpdes
low = np.array(delh<0)
# phase cruise
Tdeslc = maxthr*self.ctdesl*np.logical_and.reduce([self.descent, low, (self.phase==3)])
# phase approach
Tdesla = maxthr*self.ctdesa*np.logical_and.reduce([self.descent, low, (self.phase==4)])
# phase landing
Tdesll = maxthr*self.ctdesld*np.logical_and.reduce([self.descent, low, (self.phase==5)])
# phase ground: minimum descent thrust as a first approach
Tgd = np.minimum.reduce([Tdesh, Tdeslc])*(self.phase==6)
# merge all thrust conditions
T = np.maximum.reduce([Tjc, Ttc, Tpc, Tlvl, Tdesh, Tdeslc, Tdesla, Tdesll, Tgd])
# vertical speed
# vertical speed. Note: ISA only ( tISA = 1 )
# for climbs: reducing factor (reduced climb power) is multiplied
# cred applies below 0.8*hmax and for climbing aircraft only
hcred = np.array(self.traf.alt < (self.hmaxact*0.8))
clh = np.logical_and.reduce([hcred, self.climb])
cred = self.cred*clh
cpred = 1-cred*((self.mmax-self.mass)/(self.mmax-self.mmin))
vs = (((T-self.D)*self.traf.tas) /(self.mass*g0))*self.ESF*cpred
# switch for given vertical speed avs
if (self.traf.avs.any()>0) or (self.traf.avs.any()<0):
# thrust = f(avs)
T = ((self.traf.avs!=0)*(((self.traf.desvs*self.mass*g0)/ \
(self.ESF*np.maximum(self.traf.eps,self.traf.tas)*cpred)) \
+ self.D)) + ((self.traf.avs==0)*T)
vs = (self.traf.avs!=0)*self.traf.avs + (self.traf.avs==0)*vs
self.traf.vs = vs
self.Thr = T
# Fuel consumption
# thrust specific fuel consumption - jet
# thrust
etaj = self.cf1*(1.0+(self.traf.tas/kts)/self.cf2)
# merge
ej = etaj*self.jet
# thrust specific fuel consumption - turboprop
# thrust
etat = self.cf1*(1.-(self.traf.tas/kts)/self.cf2)*((self.traf.tas/kts)/1000.)
# merge
et = etat*self.turbo
# thrust specific fuel consumption for all aircraft
# eta is given in [kg/(min*kN)] - convert to [kg/(min*N)]
eta = np.maximum.reduce([ej, et])/1000.
# nominal fuel flow - (jet & turbo) and piston
# condition jet,turbo:
jt = np.maximum.reduce([self.jet, self.turbo])
pdf = np.maximum.reduce ([self.piston])
fnomjt = eta*self.Thr*jt
fnomp = self.cf1*pdf
# merge
fnom = fnomjt + fnomp
# minimal fuel flow jet, turbo and piston
fminjt = self.cf3*(1-(self.traf.alt/ft)/self.cf4)*jt
fminp = self.cf3*pdf
#merge
fmin = fminjt + fminp
# cruise fuel flow jet, turbo and piston
fcrjt = eta*self.Thr*self.cf5*jt
fcrp = self.cf1*self.cf5*pdf
#merge
fcr = fcrjt + fcrp
# approach/landing fuel flow
fal = np.maximum(fnom, fmin)
# designate each aircraft to its fuelflow
# takeoff
ffto = fnom*(self.phase==1)
# initial climb
ffic = fnom*(self.phase==2)/2
# phase cruise and climb
cc = np.logical_and.reduce([self.climb, (self.phase==3)])*1
ffcc = fnom*cc
# cruise and level
ffcrl = fcr*lvl
# descent cruise configuration
cd2 = np.logical_and.reduce ([self.descent, (self.phase==3)])*1
ffcd = cd2*fmin
# approach
ffap = fal*(self.phase==4)
# landing
ffld = fal*(self.phase==5)
# ground
ffgd = fmin*(self.phase==6)
# fuel flow for each condition
self.ff = np.maximum.reduce([ffto, ffic, ffcc, ffcrl, ffcd, ffap, ffld, ffgd])/60. # convert from kg/min to kg/sec
# update mass
self.mass = self.mass - self.ff*self.traf.perfdt # Use fuelflow in kg/min
return
def perf(self, simt):
if abs(simt - self.t0) >= self.dt:
self.t0 = simt
else:
return
"""Aircraft performance"""
swbada = False # no-bada version
# allocate aircraft to their flight phase
self.phase, self.bank = \
phases(bs.traf.alt, bs.traf.gs, bs.traf.delalt, \
bs.traf.cas, self.vmto, self.vmic, self.vmap, self.vmcr, self.vmld, bs.traf.bank, bs.traf.bphase, \
bs.traf.hdgsel,swbada)
# AERODYNAMICS
# compute CL: CL = 2*m*g/(VTAS^2*rho*S)
self.qS = 0.5 * bs.traf.rho * np.maximum(1., bs.traf.tas) * np.maximum(
1., bs.traf.tas) * self.Sref
cl = self.mass * g0 / (self.qS * np.cos(self.bank)) * (
self.phase != 6) + 0. * (self.phase == 6)
# scaling factors for CD0 and CDi during flight phases according to FAA (2005): SAGE, V. 1.5, Technical Manual
CD0f = (self.phase==1)*(self.etype==1)*coeffBS.d_CD0j[0] + \
(self.phase==2)*(self.etype==1)*coeffBS.d_CD0j[1] + \
(self.phase==3)*(self.etype==1)*coeffBS.d_CD0j[2] + \
(self.phase==4)*(self.etype==1)*coeffBS.d_CD0j[3] + \
(self.phase==5)*(self.etype==1)*(bs.traf.alt>=450)*coeffBS.d_CD0j[4] + \
(self.phase==5)*(self.etype==1)*(bs.traf.alt<450)*coeffBS.d_CD0j[5] + \
(self.phase==1)*(self.etype==2)*coeffBS.d_CD0t[0] + \
(self.phase==2)*(self.etype==2)*coeffBS.d_CD0t[1] + \
(self.phase==3)*(self.etype==2)*coeffBS.d_CD0t[2] + \
(self.phase==4)*(self.etype==2)*coeffBS.d_CD0t[3]
# (self.phase==5)*(self.etype==2)*(self.alt>=450)*coeffBS.d_CD0t[4] + \
# (self.phase==5)*(self.etype==2)*(self.alt<450)*coeffBS.d_CD0t[5]
kf = (self.phase==1)*(self.etype==1)*coeffBS.d_kj[0] + \
(self.phase==2)*(self.etype==1)*coeffBS.d_kj[1] + \
(self.phase==3)*(self.etype==1)*coeffBS.d_kj[2] + \
(self.phase==4)*(self.etype==1)*coeffBS.d_kj[3] + \
(self.phase==5)*(self.etype==1)*(bs.traf.alt>=450)*coeffBS.d_kj[4] + \
(self.phase==5)*(self.etype==1)*(bs.traf.alt<450)*coeffBS.d_kj[5] + \
(self.phase==1)*(self.etype==2)*coeffBS.d_kt[0] + \
(self.phase==2)*(self.etype==2)*coeffBS.d_kt[1] + \
(self.phase==3)*(self.etype==2)*coeffBS.d_kt[2] + \
(self.phase==4)*(self.etype==2)*coeffBS.d_kt[3] + \
(self.phase==5)*(self.etype==2)*(bs.traf.alt>=450)*coeffBS.d_kt[4] + \
(self.phase==5)*(self.etype==2)*(bs.traf.alt<450)*coeffBS.d_kt[5]
# drag coefficient
cd = self.CD0 * CD0f + self.k * kf * (cl * cl)
# compute drag: CD = CD0 + CDi * CL^2 and D = rho/2*VTAS^2*CD*S
self.D = cd * self.qS
# energy share factor and crossover altitude
epsalt = np.array([0.001] * bs.traf.ntraf)
self.climb = np.array(bs.traf.delalt > epsalt)
self.descent = np.array(bs.traf.delalt < -epsalt)
# crossover altitiude
bs.traf.abco = np.array(bs.traf.alt > self.atrans)
bs.traf.belco = np.array(bs.traf.alt < self.atrans)
# energy share factor
self.ESF = esf(bs.traf.abco, bs.traf.belco, bs.traf.alt, bs.traf.M,\
self.climb, self.descent, bs.traf.delspd)
# determine thrust
self.Thr = (((bs.traf.vs * self.mass * g0) /
(self.ESF * np.maximum(bs.traf.eps, bs.traf.tas))) +
self.D)
# maximum thrust jet (Bruenig et al., p. 66):
mt_jet = self.rThr * (bs.traf.rho / rho0)**0.75
# maximum thrust prop (Raymer, p.36):
mt_prop = self.P * self.eta / np.maximum(bs.traf.eps, bs.traf.tas)
# merge
self.maxthr = mt_jet * (self.etype == 1) + mt_prop * (self.etype == 2)
# Fuel Flow
# jet aircraft
# ratio current thrust/rated thrust
pThr = self.Thr / self.rThr
# fuel flow is assumed to be proportional to thrust(Torenbeek, p.62).
#For ground operations, idle thrust is used
# cruise thrust is approximately equal to approach thrust
ff_jet = ((pThr*self.ffto)*(self.phase!=6)*(self.phase!=3)+ \
self.ffid*(self.phase==6) + self.ffap*(self.phase==3) )*(self.etype==1)
# print "FFJET", (pThr*self.ffto)*(self.phase!=6)*(self.phase!=3), self.ffid*(self.phase==6), self.ffap*(self.phase==3)
# print "FFJET", ff_jet
# turboprop aircraft
# to be refined - f(spd)
# CRUISE-ALTITUDE!!!
# above cruise altitude: PSFC_CR
PSFC = (((self.PSFC_CR - self.PSFC_TO) / 20000.0)*bs.traf.alt + self.PSFC_TO)*(bs.traf.alt<20.000) + \
self.PSFC_CR*(bs.traf.alt >= 20.000)
TSFC = PSFC * bs.traf.tas / (550.0 * self.eta)
# formula p.36 Raymer is missing here!
ff_prop = self.Thr * TSFC * (self.etype == 2)
# combine
self.ff = ff_jet + ff_prop
# update mass
#self.mass = self.mass - self.ff*self.dt/60. # Use fuelflow in kg/min
# print bs.traf.id, self.phase, bs.traf.alt/ft, bs.traf.tas/kts, bs.traf.cas/kts, bs.traf.M, \
# self.Thr, self.D, self.ff, cl, cd, bs.traf.vs/fpm, self.ESF,self.atrans, self.maxthr, \
# self.vmto/kts, self.vmic/kts ,self.vmcr/kts, self.vmap/kts, self.vmld/kts, \
# CD0f, kf, self.hmaxact
# for aircraft on the runway and taxiways we need to know, whether they
# are prior or after their flight
self.post_flight = np.where(self.descent, True, self.post_flight)
# when landing, we would like to stop the aircraft.
bs.traf.pilot.spd = np.where(
(bs.traf.alt < 0.5) * (self.post_flight) * self.pf_flag, 0.0,
bs.traf.pilot.spd)
# the impulse for reducing the speed to 0 should only be given once,
# otherwise taxiing will be impossible afterwards
self.pf_flag = np.where((bs.traf.alt < 0.5) * (self.post_flight),
False, self.pf_flag)
return
def perf(self,simt):
if abs(simt - self.t0) >= self.dt:
self.t0 = simt
else:
return
"""Aircraft performance"""
swbada = False # no-bada version
# allocate aircraft to their flight phase
self.phase, self.bank = \
phases(self.traf.alt, self.traf.gs, self.traf.delalt, \
self.traf.cas, self.vmto, self.vmic, self.vmap, self.vmcr, self.vmld, self.traf.bank, self.traf.bphase, \
self.traf.hdgsel,swbada)
# AERODYNAMICS
# compute CL: CL = 2*m*g/(VTAS^2*rho*S)
self.qS = 0.5*self.traf.rho*np.maximum(1.,self.traf.tas)*np.maximum(1.,self.traf.tas)*self.Sref
cl = self.mass*g0/(self.qS*np.cos(self.bank))*(self.phase!=6)+ 0.*(self.phase==6)
# scaling factors for CD0 and CDi during flight phases according to FAA (2005): SAGE, V. 1.5, Technical Manual
CD0f = (self.phase==1)*(self.etype==1)*coeffBS.d_CD0j[0] + \
(self.phase==2)*(self.etype==1)*coeffBS.d_CD0j[1] + \
(self.phase==3)*(self.etype==1)*coeffBS.d_CD0j[2] + \
(self.phase==4)*(self.etype==1)*coeffBS.d_CD0j[3] + \
(self.phase==5)*(self.etype==1)*(self.traf.alt>=450)*coeffBS.d_CD0j[4] + \
(self.phase==5)*(self.etype==1)*(self.traf.alt<450)*coeffBS.d_CD0j[5] + \
(self.phase==1)*(self.etype==2)*coeffBS.d_CD0t[0] + \
(self.phase==2)*(self.etype==2)*coeffBS.d_CD0t[1] + \
(self.phase==3)*(self.etype==2)*coeffBS.d_CD0t[2] + \
(self.phase==4)*(self.etype==2)*coeffBS.d_CD0t[3]
# (self.phase==5)*(self.etype==2)*(self.alt>=450)*coeffBS.d_CD0t[4] + \
# (self.phase==5)*(self.etype==2)*(self.alt<450)*coeffBS.d_CD0t[5]
kf = (self.phase==1)*(self.etype==1)*coeffBS.d_kj[0] + \
(self.phase==2)*(self.etype==1)*coeffBS.d_kj[1] + \
(self.phase==3)*(self.etype==1)*coeffBS.d_kj[2] + \
(self.phase==4)*(self.etype==1)*coeffBS.d_kj[3] + \
(self.phase==5)*(self.etype==1)*(self.traf.alt>=450)*coeffBS.d_kj[4] + \
(self.phase==5)*(self.etype==1)*(self.traf.alt<450)*coeffBS.d_kj[5] + \
(self.phase==1)*(self.etype==2)*coeffBS.d_kt[0] + \
(self.phase==2)*(self.etype==2)*coeffBS.d_kt[1] + \
(self.phase==3)*(self.etype==2)*coeffBS.d_kt[2] + \
(self.phase==4)*(self.etype==2)*coeffBS.d_kt[3] + \
(self.phase==5)*(self.etype==2)*(self.traf.alt>=450)*coeffBS.d_kt[4] + \
(self.phase==5)*(self.etype==2)*(self.traf.alt<450)*coeffBS.d_kt[5]
# drag coefficient
cd = self.CD0*CD0f + self.k*kf*(cl*cl)
# compute drag: CD = CD0 + CDi * CL^2 and D = rho/2*VTAS^2*CD*S
self.D = cd*self.qS
# energy share factor and crossover altitude
epsalt = np.array([0.001]*self.traf.ntraf)
self.climb = np.array(self.traf.delalt > epsalt)
self.descent = np.array(self.traf.delalt< -epsalt)
# crossover altitiude
self.traf.abco = np.array(self.traf.alt>self.atrans)
self.traf.belco = np.array(self.traf.alt<self.atrans)
# energy share factor
self.ESF = esf(self.traf.abco, self.traf.belco, self.traf.alt, self.traf.M,\
self.climb, self.descent, self.traf.delspd)
# determine vertical speed
swvs = (np.abs(self.traf.pilot.spd) > self.traf.eps)
vspd = swvs * self.traf.pilot.spd + (1. - swvs) * self.traf.avs * np.sign(self.traf.delalt)
swaltsel = np.abs(self.traf.delalt) > np.abs(2. * self.dt * np.abs(vspd))
self.traf.vs = swaltsel * vspd
# determine thrust
self.Thr = (((self.traf.vs*self.mass*g0)/(self.ESF*np.maximum(self.traf.eps, self.traf.tas))) + self.D)
# maximum thrust jet (Bruenig et al., p. 66):
mt_jet = self.rThr*(self.traf.rho/rho0)**0.75
# maximum thrust prop (Raymer, p.36):
mt_prop = self.P*self.eta/np.maximum(self.traf.eps, self.traf.tas)
# merge
self.maxthr = mt_jet*(self.etype==1) + mt_prop*(self.etype==2)
# Fuel Flow
# jet aircraft
# ratio current thrust/rated thrust
pThr = self.Thr/self.rThr
# fuel flow is assumed to be proportional to thrust(Torenbeek, p.62).
#For ground operations, idle thrust is used
# cruise thrust is approximately equal to approach thrust
ff_jet = ((pThr*self.ffto)*(self.phase!=6)*(self.phase!=3)+ \
self.ffid*(self.phase==6) + self.ffap*(self.phase==3) )*(self.etype==1)
# print "FFJET", (pThr*self.ffto)*(self.phase!=6)*(self.phase!=3), self.ffid*(self.phase==6), self.ffap*(self.phase==3)
# print "FFJET", ff_jet
# turboprop aircraft
# to be refined - f(spd)
# CRUISE-ALTITUDE!!!
# above cruise altitude: PSFC_CR
PSFC = (((self.PSFC_CR - self.PSFC_TO) / 20000.0)*self.traf.alt + self.PSFC_TO)*(self.traf.alt<20.000) + \
self.PSFC_CR*(self.traf.alt >= 20.000)
TSFC =PSFC*self.traf.tas/(550.0*self.eta)
# formula p.36 Raymer is missing here!
ff_prop = self.Thr*TSFC*(self.etype==2)
# combine
self.ff = ff_jet + ff_prop
# update mass
#self.mass = self.mass - self.ff*self.dt/60. # Use fuelflow in kg/min
# print self.traf.id, self.phase, self.traf.alt/ft, self.traf.tas/kts, self.traf.cas/kts, self.traf.M, \
# self.Thr, self.D, self.ff, cl, cd, self.traf.vs/fpm, self.ESF,self.atrans, self.maxthr, \
# self.vmto/kts, self.vmic/kts ,self.vmcr/kts, self.vmap/kts, self.vmld/kts, \
# CD0f, kf, self.hmaxact
# for aircraft on the runway and taxiways we need to know, whether they
# are prior or after their flight
self.post_flight = np.where(self.descent, True, self.post_flight)
# when landing, we would like to stop the aircraft.
self.traf.aspd = np.where((self.traf.alt <0.5)*(self.post_flight)*self.pf_flag, 0.0, self.traf.aspd)
# the impulse for reducing the speed to 0 should only be given once,
# otherwise taxiing will be impossible afterwards
self.pf_flag = np.where ((self.traf.alt <0.5)*(self.post_flight), False, self.pf_flag)
return
