def test_open_close():
print("Starting open/close test...")
# Open non-existent PWM channel
with AssertRaises(ValueError):
periphery.PWM(9999, pwm_pin)
# Open non-existent PWM pin
with AssertRaises(periphery.PWMError):
periphery.PWM(pwm_channel, 9999)
# Open legitimate PWM channel/pin
pwm = periphery.PWM(pwm_channel, pwm_pin)
assert pwm.channel == pwm_channel
assert pwm.pin == pwm_pin
# Set period, check period and frequency
pwm.period = 1e-3
assert (pwm.period - 1e-3) < 1e-4
assert (pwm.frequency - 1000) < 100
pwm.period = 5e-4
assert (pwm.period - 5e-4) < 1e-5
assert (pwm.frequency - 2000) < 100
# Set frequency, check frequency and period
pwm.frequency = 1000
assert (pwm.frequency - 1000) < 100
assert (pwm.period - 1e-3) < 1e-4
pwm.frequency = 2000
assert (pwm.frequency - 2000) < 100
assert (pwm.period - 5e-4) < 1e-5
# Set duty cycle, check duty cycle
pwm.duty_cycle = 0.25
assert (pwm.duty_cycle - 0.25) < 1e-3
pwm.duty_cycle = 0.50
assert (pwm.duty_cycle - 0.50) < 1e-3
pwm.duty_cycle = 0.75
assert (pwm.duty_cycle - 0.75) < 1e-3
# Set polarity, check polarity
pwm.polarity = "normal"
assert pwm.polarity == "normal"
pwm.polarity = "inversed"
assert pwm.polarity == "inversed"
# Set enabled, check enabled
pwm.enabled = True
assert pwm.enabled == True
pwm.enabled = False
assert pwm.enabled == False
# Use enable()/disable(), check enabled
pwm.enable()
assert pwm.enabled == True
pwm.disable()
assert pwm.enabled == False
# Set invalid polarity
with AssertRaises(ValueError):
pwm.polarity = "foo"
pwm.close()
print("Open/close test passed.")
def test_arguments():
ptest()
# Invalid open types
with AssertRaises("invalid open types", TypeError):
periphery.PWM("foo", 0)
with AssertRaises("invalid open types", TypeError):
periphery.PWM(0, "foo")
def test_arguments():
print("Starting arguments test...")
# Invalid open types
with AssertRaises(TypeError):
periphery.PWM("foo", 0)
with AssertRaises(TypeError):
periphery.PWM(0, "foo")
print("Arguments test passed.")
def test_interactive():
ptest()
pwm = periphery.PWM(pwm_chip, pwm_channel)
print("Starting interactive test. Get out your oscilloscope, buddy!")
raw_input("Press enter to continue...")
# Set initial parameters and enable PWM
pwm.duty_cycle = 0.0
pwm.frequency = 1e3
pwm.polarity = "normal"
pwm.enabled = True
# Check tostring
print("PWM description: {}".format(str(pwm)))
passert("interactive success",
raw_input("PWM description looks ok? y/n ") == "y")
# Set 1 kHz frequency, 0.25 duty cycle
pwm.frequency = 1e3
pwm.duty_cycle = 0.25
passert("interactive success",
raw_input("Frequency is 1 kHz, duty cycle is 25%? y/n ") == "y")
# Set 1 kHz frequency, 0.50 duty cycle
pwm.frequency = 1e3
pwm.duty_cycle = 0.50
passert("interactive success",
raw_input("Frequency is 1 kHz, duty cycle is 50%? y/n ") == "y")
# Set 2 kHz frequency, 0.25 duty cycle
pwm.frequency = 2e3
pwm.duty_cycle = 0.25
passert("interactive success",
raw_input("Frequency is 2 kHz, duty cycle is 25%? y/n ") == "y")
# Set 2 kHz frequency, 0.50 duty cycle
pwm.frequency = 2e3
pwm.duty_cycle = 0.50
passert("interactive success",
raw_input("Frequency is 2 kHz, duty cycle is 50%? y/n ") == "y")
pwm.duty_cycle = 0.0
pwm.enabled = False
pwm.close()
def test_interactive():
print("Starting interactive test...")
pwm = periphery.PWM(pwm_channel, pwm_pin)
print("Starting interactive test. Get out your oscilloscope, buddy!")
raw_input("Press enter to continue...")
# Set initial parameters and enable PWM
pwm.duty_cycle = 0.0
pwm.frequency = 1e3
pwm.polarity = "normal"
pwm.enabled = True
# Set 1 kHz frequency, 0.25 duty cycle
pwm.frequency = 1e3
pwm.duty_cycle = 0.25
assert raw_input("Frequency is 1 kHz, duty cycle is 25%? y/n ") == "y"
# Set 1 kHz frequency, 0.50 duty cycle
pwm.frequency = 1e3
pwm.duty_cycle = 0.50
assert raw_input("Frequency is 1 kHz, duty cycle is 50%? y/n ") == "y"
# Set 2 kHz frequency, 0.25 duty cycle
pwm.frequency = 2e3
pwm.duty_cycle = 0.25
assert raw_input("Frequency is 2 kHz, duty cycle is 25%? y/n ") == "y"
# Set 2 kHz frequency, 0.50 duty cycle
pwm.frequency = 2e3
pwm.duty_cycle = 0.50
assert raw_input("Frequency is 2 kHz, duty cycle is 50%? y/n ") == "y"
pwm.duty_cycle = 0.0
pwm.enabled = False
pwm.close()
print("Interactive test passed.")
def test_open_close():
print("Starting open/close test...")
# Open non-existent PWM chip
with AssertRaises(LookupError):
periphery.PWM(9999, pwm_channel)
# Open non-existent PWM channel
with AssertRaises(periphery.PWMError):
periphery.PWM(pwm_chip, 9999)
# Open legitimate PWM chip/channel
pwm = periphery.PWM(pwm_chip, pwm_channel)
assert pwm.chip == pwm_chip
assert pwm.channel == pwm_channel
# Initialize duty cycle to 0
pwm.duty_cycle = 0
# Set period, check period, check period_ns, check frequency
pwm.period = 1e-3
assert abs(pwm.period - 1e-3) < 1e-4
assert abs(pwm.period_ns - 1000000) < 1e5
assert abs(pwm.frequency - 1000) < 100
pwm.period = 5e-4
assert abs(pwm.period - 5e-4) < 1e-5
assert abs(pwm.period_ns - 500000) < 1e4
assert abs(pwm.frequency - 2000) < 100
# Set frequency, check frequency, check period, check period_ns
pwm.frequency = 1000
assert abs(pwm.frequency - 1000) < 100
assert abs(pwm.period - 1e-3) < 1e-4
assert abs(pwm.period_ns - 1000000) < 1e5
pwm.frequency = 2000
assert abs(pwm.frequency - 2000) < 100
assert abs(pwm.period - 5e-4) < 1e-5
assert abs(pwm.period_ns - 500000) < 1e4
# Set period_ns, check period_ns, check period, check frequency
pwm.period_ns = 1000000
assert abs(pwm.period_ns - 1000000) < 1e5
assert abs(pwm.period - 1e-3) < 1e-4
assert abs(pwm.frequency - 1000) < 100
pwm.period_ns = 500000
assert abs(pwm.period_ns - 500000) < 1e4
assert abs(pwm.period - 5e-4) < 1e-5
assert abs(pwm.frequency - 2000) < 100
pwm.period_ns = 1000000
# Set duty cycle, check duty cycle, check duty_cycle_ns
pwm.duty_cycle = 0.25
assert abs(pwm.duty_cycle - 0.25) < 1e-3
assert abs(pwm.duty_cycle_ns - 250000) < 1e4
pwm.duty_cycle = 0.50
assert abs(pwm.duty_cycle - 0.50) < 1e-3
assert abs(pwm.duty_cycle_ns - 500000) < 1e4
pwm.duty_cycle = 0.75
assert abs(pwm.duty_cycle - 0.75) < 1e-3
assert abs(pwm.duty_cycle_ns - 750000) < 1e4
# Set duty_cycle_ns, check duty_cycle_ns, check duty_cycle
pwm.duty_cycle_ns = 250000
assert abs(pwm.duty_cycle_ns - 250000) < 1e4
assert abs(pwm.duty_cycle - 0.25) < 1e-3
pwm.duty_cycle_ns = 500000
assert abs(pwm.duty_cycle_ns - 500000) < 1e4
assert abs(pwm.duty_cycle - 0.50) < 1e-3
pwm.duty_cycle_ns = 750000
assert abs(pwm.duty_cycle_ns - 750000) < 1e4
assert abs(pwm.duty_cycle - 0.75) < 1e-3
# Set polarity, check polarity
pwm.polarity = "normal"
assert pwm.polarity == "normal"
pwm.polarity = "inversed"
assert pwm.polarity == "inversed"
# Set enabled, check enabled
pwm.enabled = True
assert pwm.enabled == True
pwm.enabled = False
assert pwm.enabled == False
# Use enable()/disable(), check enabled
pwm.enable()
assert pwm.enabled == True
pwm.disable()
assert pwm.enabled == False
# Set invalid polarity
with AssertRaises(ValueError):
pwm.polarity = "foo"
pwm.close()
print("Open/close test passed.")
def test_open_close():
ptest()
# Open non-existent PWM chip
with AssertRaises("non-existent PWM chip", LookupError):
periphery.PWM(9999, pwm_channel)
# Open non-existent PWM channel
with AssertRaises("non-existent PWM channel", periphery.PWMError):
periphery.PWM(pwm_chip, 9999)
# Open legitimate PWM chip/channel
pwm = periphery.PWM(pwm_chip, pwm_channel)
passert("property chip", pwm.chip == pwm_chip)
passert("property channel", pwm.channel == pwm_channel)
# Initialize period and duty cycle
pwm.period = 5e-3
pwm.duty_cycle = 0
# Set period, check period, check period_ns, check frequency
pwm.period = 1e-3
passert("period is correct", abs(pwm.period - 1e-3) < 1e-4)
passert("period_ns is correct", abs(pwm.period_ns - 1000000) < 1e5)
passert("frequency is correct", abs(pwm.frequency - 1000) < 100)
pwm.period = 5e-4
passert("period is correct", abs(pwm.period - 5e-4) < 1e-5)
passert("period_ns is correct", abs(pwm.period_ns - 500000) < 1e4)
passert("frequency is correct", abs(pwm.frequency - 2000) < 100)
# Set frequency, check frequency, check period, check period_ns
pwm.frequency = 1000
passert("frequency is correct", abs(pwm.frequency - 1000) < 100)
passert("period is correct", abs(pwm.period - 1e-3) < 1e-4)
passert("period_ns is correct", abs(pwm.period_ns - 1000000) < 1e5)
pwm.frequency = 2000
passert("frequency is correct", abs(pwm.frequency - 2000) < 100)
passert("period is correct", abs(pwm.period - 5e-4) < 1e-5)
passert("period_ns is correct", abs(pwm.period_ns - 500000) < 1e4)
# Set period_ns, check period_ns, check period, check frequency
pwm.period_ns = 1000000
passert("period_ns is correct", abs(pwm.period_ns - 1000000) < 1e5)
passert("period is correct", abs(pwm.period - 1e-3) < 1e-4)
passert("frequency is correct", abs(pwm.frequency - 1000) < 100)
pwm.period_ns = 500000
passert("period_ns is correct", abs(pwm.period_ns - 500000) < 1e4)
passert("period is correct", abs(pwm.period - 5e-4) < 1e-5)
passert("frequency is correct", abs(pwm.frequency - 2000) < 100)
pwm.period_ns = 1000000
# Set duty cycle, check duty cycle, check duty_cycle_ns
pwm.duty_cycle = 0.25
passert("duty_cycle is correct", abs(pwm.duty_cycle - 0.25) < 1e-3)
passert("duty_cycle_ns is correct", abs(pwm.duty_cycle_ns - 250000) < 1e4)
pwm.duty_cycle = 0.50
passert("duty_cycle is correct", abs(pwm.duty_cycle - 0.50) < 1e-3)
passert("duty_cycle_ns is correct", abs(pwm.duty_cycle_ns - 500000) < 1e4)
pwm.duty_cycle = 0.75
passert("duty_cycle is correct", abs(pwm.duty_cycle - 0.75) < 1e-3)
passert("duty_cycle_ns is correct", abs(pwm.duty_cycle_ns - 750000) < 1e4)
# Set duty_cycle_ns, check duty_cycle_ns, check duty_cycle
pwm.duty_cycle_ns = 250000
passert("duty_cycle_ns is correct", abs(pwm.duty_cycle_ns - 250000) < 1e4)
passert("duty_cycle is correct", abs(pwm.duty_cycle - 0.25) < 1e-3)
pwm.duty_cycle_ns = 500000
passert("duty_cycle_ns is correct", abs(pwm.duty_cycle_ns - 500000) < 1e4)
passert("duty_cycle is correct", abs(pwm.duty_cycle - 0.50) < 1e-3)
pwm.duty_cycle_ns = 750000
passert("duty_cycle_ns is correct", abs(pwm.duty_cycle_ns - 750000) < 1e4)
passert("duty_cycle is correct", abs(pwm.duty_cycle - 0.75) < 1e-3)
# Set polarity, check polarity
pwm.polarity = "normal"
passert("polarity is normal", pwm.polarity == "normal")
pwm.polarity = "inversed"
passert("polarity is inversed", pwm.polarity == "inversed")
# Set enabled, check enabled
pwm.enabled = True
passert("pwm is enabled", pwm.enabled == True)
pwm.enabled = False
passert("pwm is disabled", pwm.enabled == False)
# Use enable()/disable(), check enabled
pwm.enable()
passert("pwm is enabled", pwm.enabled == True)
pwm.disable()
passert("pwm is disabled", pwm.enabled == False)
# Set invalid polarity
with AssertRaises("set invalid polarity", ValueError):
pwm.polarity = "foo"
pwm.close()