def detonate_file_1(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None):
phantom.debug('detonate_file_1() called')
#phantom.debug('Action: {0} {1}'.format(action['name'], ('SUCCEEDED' if success else 'FAILED')))
extract_attachment_info__attachment_file_name = json.loads(
phantom.get_run_data(
key='extract_attachment_info:attachment_file_name'))
extract_attachment_info__vault_id = json.loads(
phantom.get_run_data(key='extract_attachment_info:vault_id'))
# collect data for 'detonate_file_1' call
parameters = []
# build parameters list for 'detonate_file_1' call
parameters.append({
'file_name': extract_attachment_info__attachment_file_name,
'vault_id': extract_attachment_info__vault_id,
})
phantom.act("detonate file",
parameters=parameters,
assets=['cuckoo'],
callback=detonate_file_1_callback,
name="detonate_file_1")
return
def update_case(action=None, success=None, container=None, results=None, handle=None, filtered_artifacts=None, filtered_results=None):
phantom.debug('update_case() called')
get_pins_body = phantom.collect2(container=container, datapath=['get_pins:action_result.data.*.response_body'], action_results=results)
# get the necessary run_data
fuzzy_matched_access_points = json.loads(phantom.get_run_data(key='fuzzy_matched_access_points'))
live_case_id = int(phantom.get_run_data(key='live_case_id'))
# delete all the existing pins to prevent duplicates
for pin in get_pins_body[0][0]['data']:
phantom.delete_pin(int(pin['id']))
# add a pin for each ap that fuzzy-matched the greylist
for ap in fuzzy_matched_access_points:
if ap['is_escalated']:
phantom.pin(container=live_case_id, message=ap['signal_strength'], data=ap['mac_address'], pin_type="card_medium", pin_style="red")
phantom.add_artifact(
container=live_case_id,
raw_data={},
cef_data=ap,
label='wireless',
name='suspicious access point detection',
severity='high',
identifier=None,
artifact_type='network')
decision_1(container=container)
return
def cf_rba_master_dynamic_prompt_pairing_1(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None,
custom_function=None,
**kwargs):
phantom.debug('cf_rba_master_dynamic_prompt_pairing_1() called')
legacy_custom_function_result_0 = [
[
json.loads(phantom.get_run_data(key="get_run_data:responses")),
json.loads(phantom.get_run_data(key="get_run_data:output")),
],
]
parameters = []
for item0 in legacy_custom_function_result_0:
parameters.append({
'response': item0[0],
'input_json': item0[1],
})
################################################################################
## Custom Code Start
################################################################################
parameters = []
responses = legacy_custom_function_result_0[0][1][0]
input_json = json.loads(legacy_custom_function_result_0[0][0])
incrementer = 0
for item in input_json:
parameters.append({
'input_json': item,
'response': responses[incrementer]
})
incrementer += 1
####
################################################################################
## Custom Code End
################################################################################
# call custom function "rba-master/dynamic_prompt_pairing", returns the custom_function_run_id
phantom.custom_function(
custom_function='rba-master/dynamic_prompt_pairing',
parameters=parameters,
name='cf_rba_master_dynamic_prompt_pairing_1',
callback=cf_rba_master_dynamic_prompt_pairing_1_callback)
return
def delete_files(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None,
custom_function=None,
**kwargs):
phantom.debug("delete_files() called")
# phantom.debug('Action: {0} {1}'.format(action['name'], ('SUCCEEDED' if success else 'FAILED')))
################################################################################
# Iterate through host and deletion command. Contains custom code.
################################################################################
generate_deletion_commands__deletion_command = json.loads(
phantom.get_run_data(
key="generate_deletion_commands:deletion_command"))
generate_deletion_commands__host = json.loads(
phantom.get_run_data(key="generate_deletion_commands:host"))
parameters = []
if generate_deletion_commands__host is not None:
parameters.append({
"command": generate_deletion_commands__deletion_command,
"ip_hostname": generate_deletion_commands__host,
})
################################################################################
## Custom Code Start
################################################################################
parameters = []
for del_cmd, host in zip(generate_deletion_commands__deletion_command,
generate_deletion_commands__host):
parameters.append({
"command": del_cmd,
"ip_hostname": host,
})
################################################################################
## Custom Code End
################################################################################
phantom.act("execute program",
parameters=parameters,
name="delete_files",
assets=["ssh"],
callback=join_dedup_hostnames)
return
def on_finish(container, summary):
phantom.debug("on_finish() called")
# Added custom code to overcome bug with on_finish trying to call outputs that may not exist
process_notes__note_title = phantom.get_run_data(
key="process_notes:note_title")
process_notes__note_content = phantom.get_run_data(
key="process_notes:note_content")
if process_notes__note_title:
process_notes__note_title = json.loads(process_notes__note_title)
if process_notes__note_content:
process_notes__note_content = json.loads(process_notes__note_content)
output = {
"note_title": process_notes__note_title,
"note_content": process_notes__note_content,
}
################################################################################
## Custom Code Start
################################################################################
# Error handling in case of playbook not being able to find investigative playbooks
list_investigate_playbooks_data = phantom.collect2(
container=container,
datapath=[
"list_investigate_playbooks:custom_function_result.data.*.full_name"
])
list_investigate_playbooks_data___full_name = [
item[0] for item in list_investigate_playbooks_data if item[0]
]
if not list_investigate_playbooks_data___full_name:
raise RuntimeError("Unable to find investigate type playbooks.")
# This function is called after all actions are completed.
# summary of all the action and/or all details of actions
# can be collected here.
# summary_json = phantom.get_summary()
# if 'result' in summary_json:
# for action_result in summary_json['result']:
# if 'action_run_id' in action_result:
# action_results = phantom.get_action_results(action_run_id=action_result['action_run_id'], result_data=False, flatten=False)
# phantom.debug(action_results)
################################################################################
## Custom Code End
################################################################################
phantom.save_playbook_output_data(output=output)
return
def get_entity_3(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None,
custom_function=None,
**kwargs):
phantom.debug('get_entity_3() called')
#phantom.debug('Action: {0} {1}'.format(action['name'], ('SUCCEEDED' if success else 'FAILED')))
DedupeListEntries__new_list = json.loads(
phantom.get_run_data(key='DedupeListEntries:new_list'))
# collect data for 'get_entity_3' call
parameters = []
# build parameters list for 'get_entity_3' call
for entity_title in DedupeListEntries__new_list:
parameters.append({
'entity_title': entity_title,
})
phantom.act(action="get entity",
parameters=parameters,
assets=['splunk itsi'],
name="get_entity_3")
return
def send_email_1(action=None, success=None, container=None, results=None, handle=None, filtered_artifacts=None, filtered_results=None):
phantom.debug('send_email_1() called')
#phantom.debug('Action: {0} {1}'.format(action['name'], ('SUCCEEDED' if success else 'FAILED')))
custom_function_2__container_email = json.loads(phantom.get_run_data(key='custom_function_2:container_email'))
# collect data for 'send_email_1' call
formatted_data_1 = phantom.get_format_data(name='format_1')
parameters = []
# build parameters list for 'send_email_1' call
parameters.append({
'body': formatted_data_1,
'from': "*****@*****.**",
'attachments': "",
'to': custom_function_2__container_email,
'cc': "",
'bcc': "",
'headers': "",
'subject': "New Case Created",
})
phantom.act("send email", parameters=parameters, assets=['smtp'], name="send_email_1", parent_action=action)
return
def url_reputation_1(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None):
phantom.debug('url_reputation_1() called')
Parsed_Proofpoint_URL__url_parsed = json.loads(
phantom.get_run_data(key='Parsed_Proofpoint_URL:url_parsed'))
# collect data for 'url_reputation_1' call
parameters = []
# build parameters list for 'url_reputation_1' call
parameters.append({
'url': Parsed_Proofpoint_URL__url_parsed,
})
phantom.act("url reputation",
parameters=parameters,
assets=['phishtank'],
callback=filter_2,
name="url_reputation_1")
return
def I_want_the_data(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None):
phantom.debug('I_want_the_data() called')
get_object_data__value = json.loads(
phantom.get_run_data(key='get_object_data:value'))
################################################################################
## Custom Code Start
################################################################################
# Write your custom code here...
phantom.debug("========================================")
phantom.debug("I got this: %s" % get_object_data__value)
phantom.debug("========================================")
################################################################################
## Custom Code End
################################################################################
return
def send_failed_playbook_email(action=None, success=None, container=None, results=None, handle=None, filtered_artifacts=None, filtered_results=None):
phantom.debug('send_failed_playbook_email() called')
#phantom.debug('Action: {0} {1}'.format(action['name'], ('SUCCEEDED' if success else 'FAILED')))
playbook_email_body__body_format = json.loads(phantom.get_run_data(key='playbook_email_body:body_format'))
# collect data for 'send_failed_playbook_email' call
formatted_data_1 = phantom.get_format_data(name='subject_body')
parameters = []
# build parameters list for 'send_failed_playbook_email' call
parameters.append({
'body': playbook_email_body__body_format,
'from': "*****@*****.**",
'attachments': "",
'to': "*****@*****.**",
'cc': "",
'bcc': "",
'headers': "",
'subject': formatted_data_1,
})
phantom.act("send email", parameters=parameters, assets=['smtp'], name="send_failed_playbook_email")
return
def domain_intelligence_1(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None):
phantom.debug('domain_intelligence_1() called')
deduplicate_inputs__domain = json.loads(
phantom.get_run_data(key='deduplicate_inputs:domain'))
# collect data for 'domain_intelligence_1' call
parameters = []
# build parameters list for 'domain_intelligence_1' call
parameters.append({
'domain': deduplicate_inputs__domain,
})
phantom.act("domain intelligence",
parameters=parameters,
assets=['recorded_future'],
callback=join_format_prompt_question,
name="domain_intelligence_1")
return
def summary_note(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None,
custom_function=None,
**kwargs):
phantom.debug("summary_note() called")
################################################################################
# Leave a summary note
################################################################################
format_custom_note__output = json.loads(
phantom.get_run_data(key="format_custom_note:output"))
################################################################################
## Custom Code Start
################################################################################
################################################################################
## Custom Code End
################################################################################
phantom.add_note(container=container,
content=format_custom_note__output,
note_format="markdown",
note_type="general",
title="SSH Log4j Response")
return
def merge_selected(action=None, success=None, container=None, results=None, handle=None, filtered_artifacts=None, filtered_results=None, custom_function=None, **kwargs):
phantom.debug("merge_selected() called")
id_value = container.get("id", None)
process_responses__container_list = json.loads(phantom.get_run_data(key="process_responses:container_list"))
parameters = []
parameters.append({
"workbook": None,
"container_list": process_responses__container_list,
"close_containers": True,
"target_container": id_value,
})
################################################################################
## Custom Code Start
################################################################################
# Write your custom code here...
################################################################################
## Custom Code End
################################################################################
phantom.custom_function(custom_function="community/container_merge", parameters=parameters, name="merge_selected", callback=merge_selected_callback)
return
def on_finish(container, summary):
phantom.debug("on_finish() called")
format_note__note_content = json.loads(phantom.get_run_data(key="format_note:note_content"))
output = {
"note_title": "TruSTAR Indicator Enrichment",
"note_content": format_note__note_content,
}
################################################################################
## Custom Code Start
################################################################################
# This function is called after all actions are completed.
# summary of all the action and/or all details of actions
# can be collected here.
# summary_json = phantom.get_summary()
# if 'result' in summary_json:
# for action_result in summary_json['result']:
# if 'action_run_id' in action_result:
# action_results = phantom.get_action_results(action_run_id=action_result['action_run_id'], result_data=False, flatten=False)
# phantom.debug(action_results)
################################################################################
## Custom Code End
################################################################################
phantom.save_playbook_output_data(output=output)
return
def playbook_wait(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None,
custom_function=None,
**kwargs):
phantom.debug("playbook_wait() called")
################################################################################
# Custom code block operating as a join function for dynamic playbook calls.
################################################################################
decide_and_launch_playbooks__names = json.loads(
phantom.get_run_data(key="decide_and_launch_playbooks:names"))
################################################################################
## Custom Code Start
################################################################################
if phantom.completed(playbook_names=decide_and_launch_playbooks__names):
process_notes(container=container)
# return early to avoid moving to next block
return
################################################################################
## Custom Code End
################################################################################
process_notes(container=container)
return
def block_ip_1(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None):
phantom.debug('block_ip_1() called')
#phantom.debug('Action: {0} {1}'.format(action['name'], ('SUCCEEDED' if success else 'FAILED')))
deduplicate_inputs__ip = json.loads(
phantom.get_run_data(key='deduplicate_inputs:ip'))
# collect data for 'block_ip_1' call
parameters = []
# build parameters list for 'block_ip_1' call
parameters.append({
'ip': deduplicate_inputs__ip,
})
phantom.act("block ip",
parameters=parameters,
assets=['cisco_firepower'],
name="block_ip_1")
return
def block_domain_1(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None):
phantom.debug('block_domain_1() called')
#phantom.debug('Action: {0} {1}'.format(action['name'], ('SUCCEEDED' if success else 'FAILED')))
deduplicate_inputs__domain = json.loads(
phantom.get_run_data(key='deduplicate_inputs:domain'))
# collect data for 'block_domain_1' call
parameters = []
# build parameters list for 'block_domain_1' call
parameters.append({
'disable_safeguards': False,
'domain': deduplicate_inputs__domain,
})
phantom.act("block domain",
parameters=parameters,
assets=['opendns_umbrella'],
name="block_domain_1")
return
def select_response_plan(action=None, success=None, container=None, results=None, handle=None, filtered_artifacts=None, filtered_results=None, custom_function=None, **kwargs):
phantom.debug("select_response_plan() called")
# set user and message variables for phantom.prompt call
user = json.loads(phantom.get_run_data(key='get_effective_user:username'))
message = """Splunk SOAR has loaded all available response plans\n - Only Playbooks with tags "response_option" are shown."""
# Playbooks list
playbook_list = phantom.collect2(container=container, datapath=["list_response_playbooks:custom_function_result.data.*.full_name"], action_results=results)
playbook_list = [item[0] for item in playbook_list]
playbook_list.append("Do Nothing")
#responses:
response_types = [
{
"prompt": "Response Plan",
"options": {
"type": "list",
"choices": playbook_list
},
}
]
phantom.prompt2(container=container, user=user, message=message, respond_in_mins=30, name="select_response_plan", response_types=response_types, callback=user_response_decision)
return
def query_connections(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None,
custom_function=None,
**kwargs):
phantom.debug('query_connections() called')
#phantom.debug('Action: {0} {1}'.format(action['name'], ('SUCCEEDED' if success else 'FAILED')))
multi_connection_query_construct__query = json.loads(
phantom.get_run_data(key='multi_connection_query_construct:query'))
# collect data for 'query_connections' call
parameters = []
# build parameters list for 'query_connections' call
parameters.append({
'query': multi_connection_query_construct__query,
'command': "search",
'display': "",
'parse_only': False,
})
phantom.act(action="run query",
parameters=parameters,
assets=['splunk-demo'],
callback=filter_nonzero_bytes,
name="query_connections")
return
def create_containers(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None):
phantom.debug('create_containers() called')
read_list__peer_list = json.loads(
phantom.get_run_data(key='read_list:peer_list'))
################################################################################
## Custom Code Start
################################################################################
# Write your custom code here...
for server in read_list__peer_list:
if server[2] in ["critical"]:
phantom.debug("%s is priority %s" % (server[0], server[2]))
status, message, cid = phantom.create_container(
name="Possible server malware", label="events")
#phantom.set_severity(cid, "high")
phantom.add_artifact(container=cid,
raw_data={},
cef_data={"sourceAddress": server[0]},
label="infection",
name="Possibly infected host",
severity="high",
artifact_type="host")
################################################################################
## Custom Code End
################################################################################
return
def run_source_dest_query(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None,
custom_function=None,
**kwargs):
phantom.debug('run_source_dest_query() called')
#phantom.debug('Action: {0} {1}'.format(action['name'], ('SUCCEEDED' if success else 'FAILED')))
IP_regex_and_format_source_dest_query__query = json.loads(
phantom.get_run_data(
key='IP_regex_and_format_source_dest_query:query'))
# collect data for 'run_source_dest_query' call
parameters = []
# build parameters list for 'run_source_dest_query' call
parameters.append({
'query': IP_regex_and_format_source_dest_query__query,
'command': "search",
'display': "",
'parse_only': False,
})
phantom.act(action="run query",
parameters=parameters,
assets=['splunk-demo-main'],
callback=If_traffic_between_the_two_units,
name="run_source_dest_query")
return
def join_send_deny_email_2(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None):
phantom.debug('join_send_deny_email_2() called')
# if the joined function has already been called, do nothing
if phantom.get_run_data(key='join_send_deny_email_2_called'):
return
# check if all connected incoming actions are done i.e. have succeeded or failed
if phantom.actions_done(
['virustotal_url_reputation', 'webpulse_url_reputation']):
# save the state that the joined function has now been called
phantom.save_run_data(key='join_send_deny_email_2_called',
value='send_deny_email_2')
# call connected block "send_deny_email_2"
send_deny_email_2(container=container, handle=handle)
return
def save_object_data(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None):
phantom.debug('save_object_data() called')
input_parameter_0 = "my_key"
I_have_some_data__my_data = json.loads(
phantom.get_run_data(key='I_have_some_data:my_data'))
################################################################################
## Custom Code Start
################################################################################
# Write your custom code here...
phantom.save_object(key=input_parameter_0,
value={'value': "'" + I_have_some_data__my_data + "'"},
auto_delete=True,
container_id=container['id'])
################################################################################
## Custom Code End
################################################################################
get_object_data(container=container)
return
def check_whitelist(action=None, success=None, container=None, results=None, handle=None, filtered_artifacts=None, filtered_results=None):
phantom.debug('check_whitelist() called')
parsed_access_points = json.loads(phantom.get_run_data(key='parsed_access_points'))
success, message, whitelist = phantom.get_list(list_name='Example Company WiFi ESSID Whitelist')
whitelist_filtered_access_points = [
ap for ap in parsed_access_points
if (
# all ESSIDs that aren't in the whitelist are suspicious
[ap["ESSID"]] not in whitelist
or
# all non-WPA2 access points are suspicious
'WPA2' not in ap['security_protocol']
)
]
message = 'out of the {} access points identified by the scan, {} matched the whitelist and are being ignored'.format(len(parsed_access_points), len(parsed_access_points) - len(whitelist_filtered_access_points))
phantom.debug(message)
live_comment(message)
phantom.save_run_data(value=json.dumps(whitelist_filtered_access_points), key='whitelist_filtered_access_points')
check_greylist()
return
def join_set_status_set_severity_set_sensitivity_1(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None,
custom_function=None):
phantom.debug('join_set_status_set_severity_set_sensitivity_1() called')
# if the joined function has already been called, do nothing
if phantom.get_run_data(
key='join_set_status_set_severity_set_sensitivity_1_called'):
return
# check if all connected incoming playbooks, actions, or custom functions are done i.e. have succeeded or failed
if phantom.completed(action_names=['update_ticket_3']):
# save the state that the joined function has now been called
phantom.save_run_data(
key='join_set_status_set_severity_set_sensitivity_1_called',
value='set_status_set_severity_set_sensitivity_1')
# call connected block "set_status_set_severity_set_sensitivity_1"
set_status_set_severity_set_sensitivity_1(container=container,
handle=handle)
return
def check_greylist(action=None, success=None, container=None, results=None, handle=None, filtered_artifacts=None, filtered_results=None):
phantom.debug('check_greylist() called')
edit_distance_threshold = 5
success, message, potentials = phantom.get_list(list_name='Potential Rogue Access Point ESSIDs')
whitelist_filtered_access_points = json.loads(phantom.get_run_data(key='whitelist_filtered_access_points'))
scanned_ESSIDs = [ap['ESSID'] for ap in whitelist_filtered_access_points]
# compare each ESSID against each potential evil twin and escalate those with a sufficiently small edit distance
matches = 0
for ap in whitelist_filtered_access_points:
ap['is_escalated'] = False
ap['matched_rule'] = None
for potential in potentials:
if edit_distance(ap['ESSID'], potential[0]) < edit_distance_threshold:
ap['is_escalated'] = True
ap['matched_rule'] = potential
matches += 1
break
message = '{} out of {} access points fuzzy-matched "Potential Rogue Access Point ESSIDs"'.format(
matches, len(whitelist_filtered_access_points))
phantom.debug(message)
live_comment(message)
phantom.save_run_data(value=json.dumps(whitelist_filtered_access_points), key='fuzzy_matched_access_points')
get_pins()
return
def detonate_url_1(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None):
phantom.debug('detonate_url_1() called')
#phantom.debug('Action: {0} {1}'.format(action['name'], ('SUCCEEDED' if success else 'FAILED')))
Parsed_Proofpoint_URL__url_parsed = json.loads(
phantom.get_run_data(key='Parsed_Proofpoint_URL:url_parsed'))
# collect data for 'detonate_url_1' call
parameters = []
# build parameters list for 'detonate_url_1' call
parameters.append({
'url': Parsed_Proofpoint_URL__url_parsed,
})
phantom.act("detonate url",
parameters=parameters,
assets=['virustotal_api'],
callback=filter_4,
name="detonate_url_1")
return
def playbook_wait(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None,
custom_function=None,
**kwargs):
phantom.debug("playbook_wait() called")
decide_and_launch_playbooks__names = json.loads(
phantom.get_run_data(key="decide_and_launch_playbooks:names"))
################################################################################
## Custom Code Start
################################################################################
if phantom.completed(playbook_names=decide_and_launch_playbooks__names):
# call connected block "indicators_not_blocked"
get_indicators_status(container=container)
# return early to avoid calling connected block too soon
return
################################################################################
## Custom Code End
################################################################################
get_indicators_status(container=container)
return
def create_generator(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None):
phantom.debug('create_generator() called')
#phantom.debug('Action: {0} {1}'.format(action['name'], ('SUCCEEDED' if success else 'FAILED')))
format_generator__generator = json.loads(
phantom.get_run_data(key='format_generator:generator'))
# collect data for 'create_generator' call
parameters = []
# build parameters list for 'create_generator' call
parameters.append({
'body': format_generator__generator,
'headers': "",
'location': "/rest/asset",
'verify_certificate': False,
})
phantom.act("post data",
parameters=parameters,
assets=['http'],
callback=create_custom_list,
name="create_generator")
return
def join_format_prompt(action=None,
success=None,
container=None,
results=None,
handle=None,
filtered_artifacts=None,
filtered_results=None,
custom_function=None):
phantom.debug('join_format_prompt() called')
# if the joined function has already been called, do nothing
if phantom.get_run_data(key='join_format_prompt_called'):
return
# check if all connected incoming playbooks, actions, or custom functions are done i.e. have succeeded or failed
if phantom.completed(action_names=['get_process_details']):
# save the state that the joined function has now been called
phantom.save_run_data(key='join_format_prompt_called',
value='format_prompt')
# call connected block "format_prompt"
format_prompt(container=container, handle=handle)
return
